当前位置：文档之家 › TL082IDRG4中文资料

TL082IDRG4中文资料

  • 格式：pdf
  • 大小：833.42 KB
  • 文档页数：37

IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,modifications,enhancements, improvements,and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty.Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty.Except where mandated by government requirements,testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design.Customers are responsible for their products and applications using TI components.To minimize the risks associated with customer products and applications,customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license,either express or implied,is granted under any TI patent right,copyright,mask work right,or other TI intellectual property right relating to any combination,machine,or process in which TI products or services are rmation published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement e of such information may require a license from a third party under the patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties,conditions,limitations,and notices.Reproduction of this information with alteration is an unfair and deceptive business practice.TI is not responsible or liable for such altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.TI products are not authorized for use in safety-critical applications(such as life support)where a failure of the TI product would reasonably be expected to cause severe personal injury or death,unless officers of the parties have executed an agreement specifically governing such use.Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications,and acknowledge and agree that they are solely responsible for all legal,regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications,notwithstanding any applications-related information or support that may be provided by TI.Further,Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or"enhanced plastic."Only products designated by TI as military-grade meet military specifications.Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk,and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS16949requirements.Buyers acknowledge and agree that,if they use anynon-designated products in automotive applications,TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetworkMicrocontrollers Security /securityLow Power /lpw Telephony /telephonyWirelessVideo&Imaging /videoWireless /wirelessMailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2007,Texas Instruments IncorporatedPACKAGING INFORMATIONOrderableDevice Status (1)Package Type Package Drawing Pins Package Qty Eco Plan (2)Lead/Ball FinishMSL Peak Temp (3)5962-9851501Q2A ACTIVE LCCC FK 201TBD POST-PLATE N /A for Pkg Type 5962-9851501QPA ACTIVE CDIP JG 81TBD A42SNPB N /A for Pkg Type 5962-9851503Q2A ACTIVE LCCC FK 201TBD POST-PLATE N /A for Pkg Type5962-9851503QCAACTIVE CDIP J 141TBD A42SNPB N /A for Pkg Type TL081ACD ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL081ACDE4ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL081ACDG4ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL081ACDR ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL081ACDRE4ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL081ACDRG4ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL081ACJG OBSOLETE CDIP JG 8TBD Call TI Call TITL081ACP ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL081ACPE4ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL081BCD ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL081BCDE4ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL081BCDG4ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL081BCDR ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL081BCDRE4ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL081BCDRG4ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL081BCP ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL081BCPE4ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL081CD ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL081CDE4ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL081CDG4ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL081CDR ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL081CDRE4ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL081CDRG4ACTIVESOICD82500Green (RoHS &no Sb/Br)CU NIPDAULevel-1-260C-UNLIM23-Apr-2007OrderableDeviceStatus (1)Package Type Package DrawingPins Package Qty Eco Plan (2)Lead/Ball Finish MSL Peak Temp (3)TL081CP ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL081CPE4ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL081CPSR ACTIVE SO PS 82000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL081CPSRE4ACTIVE SO PS 82000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL081CPWLE OBSOLETE TSSOP PW 8TBD Call TI Call TITL081ID ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL081IDE4ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL081IDG4ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL081IDR ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL081IDRE4ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL081IDRG4ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL081IP ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL081IPE4ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL081MFKB OBSOLETE LCCC FK 20TBD Call TI Call TI TL081MJG OBSOLETE CDIP JG 8TBD Call TI Call TI TL081MJGB OBSOLETE CDIP JG 8TBD Call TI Call TITL082ACD ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082ACDE4ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082ACDG4ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082ACDR ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082ACDRE4ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082ACDRG4ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082ACP ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL082ACPE4ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL082ACPSR ACTIVE SO PS 82000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082ACPSRE4ACTIVE SO PS 82000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082BCD ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082BCDE4ACTIVESOICD875Green (RoHS &CU NIPDAULevel-1-260C-UNLIM23-Apr-2007OrderableDeviceStatus (1)Package Type Package DrawingPins Package QtyEco Plan (2)Lead/Ball FinishMSL Peak Temp (3)no Sb/Br)TL082BCDG4ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082BCDR ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082BCDRE4ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082BCDRG4ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082BCP ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL082BCPE4ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL082CD ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082CDE4ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082CDG4ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082CDR ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082CDRE4ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082CDRG4ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082CJG OBSOLETE CDIP JG 8TBD Call TI Call TITL082CP ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL082CPE4ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL082CPSR ACTIVE SO PS 82000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082CPSRG4ACTIVE SO PS 82000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082CPW ACTIVE TSSOP PW 8150Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082CPWE4ACTIVE TSSOP PW 8150Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082CPWLE OBSOLETE TSSOP PW 8TBDCall TI Call TITL082CPWR ACTIVE TSSOP PW 82000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082CPWRE4ACTIVE TSSOP PW 82000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082CPWRG4ACTIVE TSSOP PW 82000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082ID ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082IDE4ACTIVE SOIC D 875Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082IDG4ACTIVESOICD875Green (RoHS &no Sb/Br)CU NIPDAULevel-1-260C-UNLIM23-Apr-2007OrderableDeviceStatus (1)Package Type Package DrawingPins Package Qty Eco Plan (2)Lead/Ball Finish MSL Peak Temp (3)TL082IDR ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082IDRE4ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082IDRG4ACTIVE SOIC D 82500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082IJG OBSOLETE CDIP JG 8TBD Call TI Call TITL082IP ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL082IPE4ACTIVE PDIP P 850Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL082IPWR ACTIVE TSSOP PW 82000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082IPWRE4ACTIVE TSSOP PW 82000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL082MFK OBSOLETE LCCC FK 20TBD Call TI Call TITL082MFKB ACTIVE LCCC FK 201TBD POST-PLATE N /A for Pkg TypeTL082MJG ACTIVE CDIP JG 81TBD A42SNPB N /A for Pkg Type TL082MJGB ACTIVE CDIP JG 81TBD A42SNPB N /A for Pkg Type TL084ACD ACTIVE SOIC D 1450Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL084ACDE4ACTIVE SOIC D 1450Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL084ACDG4ACTIVE SOIC D 1450Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL084ACDR ACTIVE SOIC D 142500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL084ACDRE4ACTIVE SOIC D 142500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL084ACDRG4ACTIVE SOIC D 142500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL084ACN ACTIVE PDIP N 1425Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL084ACNE4ACTIVE PDIP N 1425Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type TL084ACNSR ACTIVE SO NS 142000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL084ACNSRE4ACTIVE SO NS 142000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL084BCD ACTIVE SOIC D 1450Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL084BCDE4ACTIVE SOIC D 1450Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL084BCDG4ACTIVE SOIC D 1450Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL084BCDR ACTIVE SOIC D 142500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL084BCDRE4ACTIVE SOIC D 142500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL084BCDRG4ACTIVESOICD142500Green (RoHS &no Sb/Br)CU NIPDAULevel-1-260C-UNLIM23-Apr-2007Orderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)TL084BCN ACTIVE PDIP N1425Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeTL084BCNE4ACTIVE PDIP N1425Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeTL084CD ACTIVE SOIC D1450Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL084CDE4ACTIVE SOIC D1450Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL084CDG4ACTIVE SOIC D1450Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL084CDR ACTIVE SOIC D142500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL084CDRE4ACTIVE SOIC D142500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL084CDRG4ACTIVE SOIC D142500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL084CJ OBSOLETE CDIP J14TBD Call TI Call TITL084CN ACTIVE PDIP N1425Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeTL084CNE4ACTIVE PDIP N1425Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeTL084CNSLE OBSOLETE SO NS14TBD Call TI Call TITL084CNSR ACTIVE SO NS142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL084CNSRG4ACTIVE SO NS142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL084CPW ACTIVE TSSOP PW1490Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL084CPWE4ACTIVE TSSOP PW1490Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL084CPWLE OBSOLETE TSSOP PW14TBD Call TI Call TITL084CPWR ACTIVE TSSOP PW142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL084CPWRE4ACTIVE TSSOP PW142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL084ID ACTIVE SOIC D1450Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL084IDE4ACTIVE SOIC D1450Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL084IDG4ACTIVE SOIC D1450Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL084IDR ACTIVE SOIC D142500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL084IDRE4ACTIVE SOIC D142500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMTL084IDRG4ACTIVE SOIC D142500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM TL084IJ OBSOLETE CDIP J14TBD Call TI Call TITL084IN ACTIVE PDIP N1425Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeTL084INE4ACTIVE PDIP N1425Pb-Free CU NIPDAU N/A for Pkg Type 23-Apr-2007Orderable DeviceStatus (1)Package Type Package Drawing Pins Package QtyEco Plan (2)Lead/Ball FinishMSL Peak Temp (3)(RoHS)TL084MFK ACTIVE LCCC FK 201TBD POST-PLATE N /A for Pkg Type TL084MFKB ACTIVE LCCC FK 201TBD POST-PLATE N /A for Pkg Type TL084MJ ACTIVE CDIP J 141TBD A42SNPB N /A for Pkg Type TL084MJB ACTIVE CDIP J 141TBD A42SNPB N /A for Pkg Type TL084QD ACTIVE SOIC D 1450TBD CU NIPDAU Level-1-220C-UNLIM TL084QDRACTIVESOICD142500TBDCU NIPDAULevel-1-220C-UNLIM(1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan -The planned eco-friendly classification:Pb-Free (RoHS),Pb-Free (RoHS Exempt),or Green (RoHS &no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free (RoHS):TI's terms "Lead-Free"or "Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all 6substances,including the requirement that lead not exceed 0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Pb-Free (RoHS Exempt):This component has a RoHS exemption for either 1)lead-based flip-chip solder bumps used between the die and package,or 2)lead-based die adhesive used between the die and leadframe.The component is otherwise considered Pb-Free (RoHS compatible)as defined above.Green (RoHS &no Sb/Br):TI defines "Green"to mean Pb-Free (RoHS compatible),and free of Bromine (Br)and Antimony (Sb)based flame retardants (Br or Sb do not exceed 0.1%by weight inhomogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annual basis.23-Apr-2007TAPE AND REELINFORMATION3-May-2007DevicePackage Pins SiteReel Diameter (mm)Reel Width (mm)A0(mm)B0(mm)K0(mm)P1(mm)W (mm)Pin1Quadrant TL081ACDR D 8FMX 33012 6.4 5.2 2.1812Q1TL081BCDR D 8FMX 33012 6.4 5.2 2.1812Q1TL081CDR D 8FMX 33012 6.4 5.2 2.1812Q1TL081CPSR PS 8MLA 330168.2 6.6 2.51216Q1TL081IDR D 8FMX 33012 6.4 5.2 2.1812Q1TL082ACDR D 8FMX 33012 6.4 5.2 2.1812Q1TL082ACDR D 8MLA 33012 6.4 5.2 2.1812Q1TL082ACPSR PS 8MLA 330168.2 6.6 2.51216Q1TL082BCDR D 8FMX 33012 6.4 5.2 2.1812Q1TL082CDR D 8FMX 33012 6.4 5.2 2.1812Q1TL082CDR D 8MLA 33012 6.4 5.2 2.1812Q1TL082CPSR PS 8MLA 330168.2 6.6 2.51216Q1TL082CPWR PW 8MLA 330127.0 3.6 1.6812Q1TL082IDR D 8FMX 33012 6.4 5.2 2.1812Q1TL082IDR D 8MLA 33012 6.4 5.2 2.1812Q1TL082IPWR PW 8MLA 330127.0 3.6 1.6812Q1TL084ACDR D 14MLA 33016 6.59.0 2.1816Q1TL084ACDR D 14FMX 3300 6.59.0 2.1816Q1TL084ACNSR NS 14MLA 330168.210.5 2.51216Q1TL084BCDR D 14FMX 3300 6.59.0 2.1816Q1TL084CDR D 14FMX 3300 6.59.0 2.1816Q1TL084CNSR NS 14MLA 330168.210.5 2.51216Q1TL084CPWR PW 14MLA 330127.0 5.6 1.6812Q1TL084IDRD14FMX3306.59.02.1816Q13-May-2007TAPE AND REEL BOX INFORMATIONDevicePackagePins Site Length (mm)Width (mm)Height (mm)TL081ACDR D 8FMX 338.1340.520.64TL081BCDR D 8FMX 338.1340.520.64TL081CDR D 8FMX 338.1340.520.64TL081CPSR PS 8MLA 333.2333.228.58TL081IDR D 8FMX 338.1340.520.64TL082ACDR D 8FMX 338.1340.520.64TL082ACDR D 8MLA 338.1340.520.64TL082ACPSR PS 8MLA 333.2333.228.58TL082BCDR D 8FMX 338.1340.520.64TL082CDR D 8FMX 338.1340.520.64TL082CDR D 8MLA 338.1340.520.64TL082CPSR PS 8MLA 333.2333.228.58TL082CPWR PW 8MLA 338.1340.520.64TL082IDR D 8FMX 338.1340.520.64TL082IDR D 8MLA 338.1340.520.64TL082IPWR PW 8MLA 338.1340.520.64TL084ACDR D 14MLA 333.2333.228.58TL084ACDR D 14FMX 333.2333.228.58TL084ACNSR NS 14MLA 333.2333.228.58TL084BCDR D 14FMX 333.2333.228.58TL084CDR D 14FMX 333.2333.228.58TL084CNSR NS 14MLA 333.2333.228.58TL084CPWR PW 14MLA 338.1340.520.64TL084IDRD14FMX333.2333.228.583-May-2007IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,modifications,enhancements, improvements,and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty.Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty.Except where mandated by government requirements,testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design.Customers are responsible for their products and applications using TI components.To minimize the risks associated with customer products and applications,customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license,either express or implied,is granted under any TI patent right,copyright,mask work right,or other TI intellectual property right relating to any combination,machine,or process in which TI products or services are rmation published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement e of such information may require a license from a third party under the patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties,conditions,limitations,and notices.Reproduction of this information with alteration is an unfair and deceptive business practice.TI is not responsible or liable for such altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.TI products are not authorized for use in safety-critical applications(such as life support)where a failure of the TI product would reasonably be expected to cause severe personal injury or death,unless officers of the parties have executed an agreement specifically governing such use.Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications,and acknowledge and agree that they are solely responsible for all legal,regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications,notwithstanding any applications-related information or support that may be provided by TI.Further,Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or"enhanced plastic."Only products designated by TI as military-grade meet military specifications.Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk,and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS16949requirements.Buyers acknowledge and agree that,if they use anynon-designated products in automotive applications,TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetworkMicrocontrollers Security /securityLow Power /lpw Telephony /telephonyWirelessVideo&Imaging /videoWireless /wirelessMailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2007,Texas Instruments Incorporated。

合集下载

LMV821IDCKTE4中文资料

LMV821IDCKTE4中文资料

SLOS434G – FEBRUARY 2004 – REVISED AUGUST 2005
SYMBOL (EACH AMPLIFIER)
IN − OUT
IN +
LMV824 SIMPLIFIED SCHEMATIC
VCC
VCC VCC
IN− IN+
VBIAS5
+
−
VBIAS3
+
VBIAS4− +
−
IN− 3
5 VCC+ 4 OUT
The LMV8xx devices are characterized for operation
from –40°C to 85°C. The LMV8xxI devices are characterized for operation from –40°C to 125°C.
LMV824 . . . D, DGV, OR PW PACKAGE (TOP VIEW)
1OUT 1 1IN− 2 1IN+ 3 VCC+ 4 2IN+ 5 2IN− 6
2OUT 7
14 4OUT 13 4IN − 12 4IN+ 11 GND/VCC− 10 3IN+ 9 3IN− 8 3OUT
LMV822 . . . D OR DGK PACKAGE (TOP VIEW)
1OUT 1 1IN − 2 1IN+ 3
GND/VCC− 4
8 VCC+ 7 2OUT 6 2IN − 5 2IN+
LMV821 . . . DBV OR DCK PACKAGE (TOP VIEW)
IN+ 1 GND/VCC− 2
TL082D

TL082D

June 2008 Rev 31/15TL081General purpose JFET single operational amplifiersFeatures■Wide common-mode (up to V CC +) and differential voltage range ■Low input bias and offset current ■Output short-circuit protection■High input impedance JFET input stage ■Internal frequency compensation ■Latch-up free operation ■High slew rate: 16V/µs (typ)DescriptionThe TL081, TL081A and TL081B are high-speed JFET input single operational amplifiersincorporating well matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit.The devices feature high slew rates, low input bias and offset currents, and low offset voltage temperature coefficient.Schematic diagram TL0812/151 Schematic diagramTL081Absolute maximum ratings3/152 Absolute maximum ratingsTable 1.Absolute maximum ratingsSymbol ParameterTL081I, AI, BITL081C, AC,BCUnit V CC Supply voltage (1)1.All voltage values, except differential voltage, are with respect to the zero reference level (ground) of thesupply voltages where the zero reference level is the midpoint between V CC + and V CC -.±18V V in Input voltage (2)2.The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 volts,whichever is less.±15V V id Differential input voltage (3)3.Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.±30V P totPower dissipation680mWOutput short-circuit duration (4)4.The output may be shorted to ground or to either supply. Temperature and/or supply voltages must belimited to ensure that the dissipation rating is not exceeded.Infinite T stgStorage temperature range -65 to +150°CR thjaThermal resistance junction to ambient (5) (6)SO-8DIP85.Short-circuits can cause excessive heating and destructive dissipation.6.Rth are typical values.12585°C/WR thjcThermal resistance junction to case (5)(6)SO-8DIP84041°C/W ESDHBM: human body model (7)7.Human body model: 100pF discharged through a 1.5k Ω resistor between two pins of the device, done forall couples of pin combinations with other pins floating. 500V MM: machine model (8)8.Machine model: a 200pF cap is charged to the specified voltage, then discharged directly between twopins of the device with no external series resistor (internal resistor < 5Ω), done for all couples of pin combinations with other pins floating.200V CDM: charged device model (9)9.Charged device model: all pins plus package are charged together to the specified voltage and thendischarged directly to the ground.1.5kVTable 2.Operating conditionsSymbol ParameterTL081I, AI, BITL081C, AC, BC Unit V CC Supply voltage range6 to 36V T operOperating free-air temperature range-40 to +1050 to +70°C3 ElectricalcharacteristicsTable 3.V CC = ±15V, T amb = +25°C (unless otherwise specified)Symbol Parameter TL081I, AC, AI, BC,BITL081CUnit Min.Typ.Max.Min.Typ.Max.V io Input offset voltage (R s= 50Ω)T amb = +25°C TL081TL081ATL081BT min≤ T amb≤ T max TL081TL081ATL081B3311063137531013mVDV io Input offset voltage drift1010µV/°CI io Input offset current (1)T amb = +25°CT min≤ T amb≤ T max51004510010pAnAI ib Input bias current (1)T amb = +25°CT min≤ T amb≤ T max20200202040020nAA vd Large signal voltage gain (R L = 2kΩ, V o = ±10V)T amb = +25°CT min≤ T amb≤ T max50252002515200V/mVSVR Supply voltage rejection ratio (R S= 50Ω)T amb = +25°CT min≤ T amb≤ T max808086707086dBI CC Supply current, no loadT amb = +25°CT min≤ T amb≤ T max1.42.52.51.42.52.5mAV icm Input common mode voltage range±11+15-12±11+15-12VCMR Common mode rejection ratio (R S= 50Ω)T amb = +25°CT min≤ T amb≤ T max808086707086dBI os Output short-circuit currentT amb = +25°CT min≤ T amb≤ T max10104060601010406060mA±V opp Output voltage swingT amb = +25°C R L = 2kΩR L = 10kΩT min≤ T amb≤ T max R L = 2kΩR L = 10kΩ101210121213.5101210121213.5VSR Slew rate (T amb = +25°C)V in = 10V, R L = 2kΩ, C L = 100pF, unity gain816816V/µs4/155/15t r Rise time (T amb = +25°C)V in = 20mV , R L = 2k Ω, C L = 100pF , unity gain 0.10.1µs K ov Overshoot (T amb = +25°C)V in = 20mV , R L = 2k Ω, C L = 100pF , unity gain 1010%GBP Gain bandwidth product (T amb = +25°C)V in = 10mV , R L = 2k Ω, C L = 100pF , F= 100kHz 2.54 2.54MHz R i Input resistance10121012ΩTHDTotal harmonic distortion (T amb = +25°C), F= 1kHz, R L = 2k Ω,C L = 100pF , A v = 20dB,V o = 2V pp 0.010.01%e n Equivalent input noise voltage R S = 100Ω, F= 1kHz 1515∅mPhase margin4545degrees1.The input bias currents are junction leakage currents which approximately double for every 10°C increase in the junctiontemperature.Table 3.V CC = ±15V, T amb = +25°C (unless otherwise specified) (continued)SymbolParameterTL081I, AC, AI, BC,BI TL081CUnitMin.Typ.Max.Min.Typ.Max.nV Hz-----------Figure 3.Maximum peak-to-peak outputFigure 4.Maximum peak-to-peak outputFigure 6.Maximum peak-to-peak outputFigure 7.Maximum peak-to-peak output Figure 8.Maximum peak-to-peak output6/157/15Figure 9.Input bias current versus free airFigure rge signal differential voltageFigure rge signal differential voltageamplification and phase shiftFigure 12.Total power dissipation versus freeair temperatureFigure 13.Supply current per amplifier versus Figure 14.Supply current per amplifier versusFigure mon mode rejection ratioFigure 16.Equivalent input noise voltageFigure 19.Voltage follower large signal pulse8/15TL081Parameter measurement information9/154 Parameter measurement informationTypical applications TL08110/155 Typical applicationsTL081Package information11/156 Package informationIn order to meet environmental requirements, ST offers these devices in ECOPACK®packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: .Package information TL08112/156.1 DIP 8 package informationTable 4.DIP8 package mechanical dataRef.DimensionsMillimetersInches Min.Typ.Max.Min.Typ.Max.A 5.330.210A10.380.015A2 2.92 3.30 4.950.1150.1300.195b 0.360.460.560.0140.0180.022b2 1.14 1.52 1.780.0450.0600.070c 0.200.250.360.0080.0100.014D 9.029.2710.160.3550.3650.400E 7.627.878.260.3000.3100.325E1 6.106.357.110.2400.2500.280e 2.540.100eA 7.620.300eB 10.920.430L2.923.303.810.1150.1300.150TL081Package information13/156.2 SO-8 package informationTable 5.SO-8 package mechanical dataRef.DimensionsMillimetersInches Min.Typ.Max.Min.Typ.Max.A 1.750.069A10.100.250.0040.010A2 1.250.049b 0.280.480.0110.019c 0.170.230.0070.010D 4.80 4.90 5.000.1890.1930.197E 5.80 6.00 6.200.2280.2360.244E1 3.803.904.000.1500.1540.157e 1.270.050h 0.250.500.0100.020L 0.40 1.270.0160.050k 1°8°1°8°ccc0.100.004Ordering information TL08114/157 Ordering information8 Revision historyTable 6.Order codesOrder code TemperaturerangePackagePackingMarking TL081IN TL081AIN TL081BIN -40°C, +105°C DIP8T ubeTL081IN TL081AIN TL081BIN TL081ID/IDT TL081AID/AIDT TL081BID/BIDT SO-8T ube or tape & reel 081I 081AI 081BI TL081IYD/DT (1)TL081AIYD/DT (1)TL081BIYD/DT (1)1.Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screeningaccording to AEC Q001 & Q 002 or equivalent are on-going.SO-8(Automotive grade)T ube or tape & reel081IY 081AIY 081BIY TL081CN TL081ACN TL081BCN 0°C, +70°CDIP8T ubeTL081CN TL081ACN TL081BCN TL081CD/CDT TL081ACD/ACDT TL081BCD/BCDTSO-8T ube or tape & reel081C 081AC 081BCTable 7.Document revision historyDate RevisionChanges30-Apr-20011Initial release.27-Jul-20072Added values for R thja and R thjc in Table 1: Absolute maximumratings .Added T able 2: Operating conditions .Added automotive grade part numbers in T able 6: Order codes .Format update.27-Jun-20083Removed information concerning military temperature range (TL081Mx, TL081AMx, TL081BMx).Added missing order codes for automotive grade products and updated footnote in T able 6: Order codes .TL081Please Read Carefully:Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.All ST products are sold pursuant to ST’s terms and conditions of sale.Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.ST and the ST logo are trademarks or registered trademarks of ST in various countries.Information in this document supersedes and replaces all information previously supplied.The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.© 2008 STMicroelectronics - All rights reservedSTMicroelectronics group of companiesAustralia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America15/15。

TL082C资料

TL082C资料

These devices are available in single, dual and quad operational amplifiers which are pin–compatible with the industry standard MC1741, MC1458, and the MC3403/LM324 bipolar products.
查询TL082C供应商
捷多邦，专业PCB打样工厂，24小时加急出货 Order this document by TL081C/D
JFET Input Operational
Amplifiers
These low–cost JFET input operational amplifiers combine two state–of– the–art linear technologies on a single monolithic integrated circuit. Each internally compensated operational amplifier has well matched high voltage JFET input devices for low input offset voltage. The BIFET technology provides wide bandwidths and fast slew rates with low input bias currents, input offset currents, and supply currents.
+ 10 3– 9
Inputs 3
8 Output 3
TL084 (Top View)
© Motorola, Inc. 1997
TL082CM中文资料

TL082CM中文资料

TL082Wide Bandwidth Dual JFET Input Operational AmplifierGeneral DescriptionThese devices are low cost,high speed,dual JFET input op-erational amplifiers with an internally trimmed input offset voltage (BI-FET II ™technology).They require low supply current yet maintain a large gain bandwidth product and fast slew rate.In addition,well matched high voltage JFET input devices provide very low input bias and offset currents.The TL082is pin compatible with the standard LM1558allowing designers to immediately upgrade the overall performance of existing LM1558and most LM358designs.These amplifiers may be used in applications such as high speed integrators,fast D/A converters,sample and hold cir-cuits and many other circuits requiring low input offset volt-age,low input bias current,high input impedance,high slew rate and wide bandwidth.The devices also exhibit low noise and offset voltage drift.Featuresn Internally trimmed offset voltage:15mV n Low input bias current:50pAn Low input noise voltage:16nV/√Hz n Low input noise current:0.01pA/√Hz n Wide gain bandwidth:4MHz n High slew rate:13V/µs n Low supply current: 3.6mA n High input impedance:1012ΩnLow total harmonic distortion A V =10,:<0.02%R L =10k,V O =20Vp −p,BW =20Hz−20kHzn Low 1/f noise corner:50Hzn Fast settling time to 0.01%:2µsTypical Connection Connection DiagramSimplified SchematicBI-FET II ™is a trademark of National Semiconductor Corp.DS008357-1DIP/SO Package (Top View)DS008357-3Order Number TL082CM or TL082CP See NS Package Number M08A or N08EDS008357-2April 1998TL082Wide Bandwidth Dual JFET Input Operational Amplifier©1999National Semiconductor Corporation Absolute Maximum Ratings(Note1)If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications.Supply Voltage±18V Power Dissipation(Note2) Operating Temperature Range0˚C to+70˚C T j(MAX)150˚C Differential Input Voltage±30V Input Voltage Range(Note3)±15V Output Short Circuit Duration Continuous Storage Temperature Range−65˚C to+150˚C Lead Temp.(Soldering,10seconds)260˚C ESD rating to be determined.Note1:“Absolute Maximum Ratings”indicate limits beyond which damage to the device may occur.Operating Ratings indicate conditions for which the device is functional,but do not guarantee specific performance limits.DC Electrical Characteristics(Note5)Symbol Parameter Conditions TL082C UnitsMin Typ MaxV OS Input Offset Voltage R S=10kΩ,T A=25˚C515mVOver Temperature20mV ∆V OS/∆T Average TC of Input Offset R S=10kΩ10µV/˚C VoltageI OS Input Offset Current T j=25˚C,(Notes5,6)25200pAT j≤70˚C4nA I B Input Bias Current T j=25˚C,(Notes5,6)50400pAT j≤70˚C8nA R IN Input Resistance T j=25˚C1012ΩA VOL Large Signal Voltage Gain V S=±15V,T A=25˚C25100V/mVV O=±10V,R L=2kΩOver Temperature15V/mV V O Output Voltage Swing V S=±15V,R L=10kΩ±12±13.5V V CM Input Common-Mode Voltage V S=±15V±11+15V Range−12V CMRR Common-Mode Rejection Ratio R S≤10kΩ70100dB PSRR Supply Voltage Rejection Ratio(Note7)70100dB I S Supply Current 3.6 5.6mAAC Electrical Characteristics(Note5)Symbol Parameter Conditions TL082C UnitsMin Typ Max Amplifier to Amplifier Coupling T A=25˚C,f=1Hz-−120dB20kHz(Input Referred)SR Slew Rate V S=±15V,T A=25˚C813V/µs GBW Gain Bandwidth Product V S=±15V,T A=25˚C4MHz e n Equivalent Input Noise Voltage T A=25˚C,R S=100Ω,25nV/√Hzf=1000Hzi n Equivalent Input Noise Current T j=25˚C,f=1000Hz0.01pA/√HzNote2:For operating at elevated temperature,the device must be derated based on a thermal resistance of115˚C/W junction to ambient for the N package.Note3:Unless otherwise specified the absolute maximum negative input voltage is equal to the negative power supply voltage.Note4:The power dissipation limit,however,cannot be exceeded.Note5:These specifications apply for V S=±15V and0˚C≤T A≤+70˚C.V OS,I B and I OS are measured at V CM=0.Note6:The input bias currents are junction leakage currents which approximately double for every10˚C increase in the junction temperature,T j.Due to the limited production test time,the input bias currents measured are correlated to junction temperature.In normal operation the junction temperature rises above the ambient temperature as a result of internal power dissipation,P D.T j=T A+θjA P D whereθjA is the thermal resistance from junction to e of a heat sink is recom-mended if input bias current is to be kept to a minimum.Note7:Supply voltage rejection ratio is measured for both supply magnitudes increasing or decreasing simultaneously in accordance with common practice.V S=±6V to±15V.2Typical Performance CharacteristicsInput Bias CurrentDS008357-18Input Bias CurrentDS008357-19Supply CurrentDS008357-20Positive Common-Mode Input Voltage LimitDS008357-21Negative Common-Mode InputVoltage LimitDS008357-22Positive Current LimitDS008357-23Negative Current LimitDS008357-24Voltage SwingDS008357-25Output Voltage SwingDS008357-26 3Typical Performance Characteristics(Continued)Gain BandwidthDS008357-27Bode PlotDS008357-28Slew RateDS008357-29Distortion vs FrequencyDS008357-30Undistorted Output Voltage SwingDS008357-31Open Loop Frequency ResponseDS008357-32Common-Mode Rejection Ratio DS008357-33Power Supply Rejection RatioDS008357-34Equivalent Input Noise VoltageDS008357-35 4Typical Performance Characteristics(Continued)Pulse ResponseOpen Loop VoltageGain(V/V)DS008357-36Output ImpedanceDS008357-37Inverter Setting TimeDS008357-38 Small Signal InvertingDS008357-6Small Signal Non-InvertingDS008357-7 Large Signal InvertingDS008357-8Large Signal Non-InvertingDS008357-95Pulse Response(Continued)Application HintsThese devices are op amps with an internally trimmed input offset voltage and JFET input devices (BI-FET II).These JFETs have large reverse breakdown voltages from gate to source and drain eliminating the need for clamps across the inputs.Therefore,large differential input voltages can easily be accommodated without a large increase in input current.The maximum differential input voltage is independent of the supply voltages.However,neither of the input voltages should be allowed to exceed the negative supply as this will cause large currents to flow which can result in a destroyed unit.Exceeding the negative common-mode limit on either input will cause a reversal of the phase to the output and force the amplifier output to the corresponding high or low state.Ex-ceeding the negative common-mode limit on both inputs will force the amplifier output to a high state.In neither case does a latch occur since raising the input back within the common-mode range again puts the input stage and thus the amplifier in a normal operating mode.Exceeding the positive common-mode limit on a single input will not change the phase of the output;however,if both in-puts exceed the limit,the output of the amplifier will be forced to a high state.The amplifiers will operate with a common-mode input volt-age equal to the positive supply;however,the gain band-width and slew rate may be decreased in this condition.When the negative common-mode voltage swings to within 3V of the negative supply,an increase in input offset voltage may occur.Each amplifier is individually biased by a zener reference which allows normal circuit operation on ±6V power sup-plies.Supply voltages less than these may result in lower gain bandwidth and slew rate.The amplifiers will drive a 2k Ωload resistance to ±10V over the full temperature range of 0˚C to +70˚C.If the amplifier is forced to drive heavier load currents,however,an increase in input offset voltage may occur on the negative voltage swing and finally reach an active current limit on both posi-tive and negative swings.Precautions should be taken to ensure that the power supply for the integrated circuit never becomes reversed in polarity or that the unit is not inadvertently installed backwards in a socket as an unlimited current surge through the resulting forward diode within the IC could cause fusing of the internal conductors and result in a destroyed unit.Because these amplifiers are JFET rather than MOSFET in-put op amps they do not require special handling.As with most amplifiers,care should be taken with lead dress,component placement and supply decoupling in order to ensure stability.For example,resistors from the output to an input should be placed with the body close to the input to minimize “pick-up”and maximize the frequency of the feed-back pole by minimizing the capacitance from the input to ground.A feedback pole is created when the feedback around any amplifier is resistive.The parallel resistance and capacitance from the input of the device (usually the inverting input)to AC ground set the frequency of the pole.In many instances the frequency of this pole is much greater than the expected 3dB frequency of the closed loop gain and consequently there is negligible effect on stability margin.However,if the feed-back pole is less than approximately 6times the expected 3dB frequency a lead capacitor should be placed from the out-put to the input of the op amp.The value of the added ca-pacitor should be such that the RC time constant of this ca-pacitor and the resistance it parallels is greater than or equal to the original feedback pole time constant.Current Limit (R L =100Ω)DS008357-10 6Detailed SchematicDS008357-11 Typical ApplicationsThree-Band Active Tone ControlDS008357-127Typical Applications(Continued)DS008357-13•All potentiometers are linear taper•Use the LF347Quad for stereo applicationsNote8:All controls flat.Note9:Bass and treble boost,mid flat.Note10:Bass and treble cut,mid flat.Note11:Mid boost,bass and treble flat.Note12:Mid cut,bass and treble flat.Improved CMRR Instrumentation AmplifierDS008357-14C and E are separate isolated groundsMatching of R2’s,R4’s and R5’s control CMRRWith A VT=1400,resistor matching=0.01%:CMRR=136dB•Very high input impedance•Super high CMRR8Typical Applications(Continued)Fourth Order Low Pass Butterworth FilterDS008357-15Fourth Order High Pass Butterworth FilterDS008357-169Typical Applications(Continued)Ohms to Volts ConverterDS008357-1710Physical Dimensions inches(millimeters)unless otherwise notedOrder Number TL082CMNS Package M08AOrder Number TL082CPNS Package N08E11NotesLIFE SUPPORT POLICYNATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION.As used herein:1.Life support devices or systems are devices or systems which,(a)are intended for surgical implant into the body,or (b)support or sustain life,and whose failure to perform when properly used in accordance with instructions for use provided in the labeling,can be reasonably expected to result in a significant injury to the user.2.A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system,or to affect its safety or effectiveness.National Semiconductor Corporation AmericasTel:1-800-272-9959Fax:1-800-737-7018Email:support@National Semiconductor EuropeFax:+49(0)180-5308586Email:europe.support@Deutsch Tel:+49(0)180-5308585English Tel:+49(0)180-5327832Français Tel:+49(0)180-5329358Italiano Tel:+49(0)180-5341680National Semiconductor Asia Pacific Customer Response Group Tel:65-2544466Fax:65-2504466Email:sea.support@National Semiconductor Japan Ltd.Tel:81-3-5639-7560Fax:81-3-5639-7507T L 082W i d e B a n d w i d t h D u a l J F E T I n p u t O p e r a t i o n a l A m p l i f i e rNational does not assume any responsibility for use of any circuitry described,no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.。