当前位置：文档之家 › RX-V471中文说明书

RX-V471中文说明书

  • 格式：pdf
  • 大小：11.34 MB
  • 文档页数：85
设置
一般安装过程. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
音箱布置方式. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
连接电源线 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
自动优化音箱设置 (YPAO). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
缆线插头和插孔 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
音频 / 视频插孔 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 模拟视频插孔 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 音频插孔 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
连接 FM/AM 天线. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
连接录制装置 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
部件名称和功能 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
前部面板 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 前面板显示 （指示符）. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 后部面板 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 遥控器 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
连接电视 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
连接播放装置. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
连接音箱 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
5.1 声道音箱布置方式 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
功能
本机功能介绍. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
齐全的有用功能！ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 出现以下情况时 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5.1 声道音箱布置方式 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 4.1 声道音箱布置方式 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 3.1 声道音箱布置方式 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 2.1 声道音箱布置方式 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
使用 YPAO 前的准备工作. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 开始测量 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 确认测量结果 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 错误信息 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 警告信息 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

合集下载

RenQIV型氨氮在线分析仪使用手册

RenQIV型氨氮在线分析仪使用手册

RenQ-IV型氨氮在线分析仪（中文版）使用说明书江苏锐泉环保技术有限公司目录第一章安全预防措施特别声明 (1)第二章技术规格 (2)第三章系统概述 (3)第四章拆箱和安装 (4)第五章试剂 (5)5.1 试剂 NH4N- A (5)5.2 试剂NH4N- B (5)5.3 标准液母液1000mg/L (5)5.4 标准液二 (5)5.5标准液一 (6)5.6 蒸馏水 (6)5.7使用与保存 (6)5.8试剂的放置 (6)第六章仪器操作 (7)6.1 屏幕操作 (7)6.2 查看 (8)6.2.1 查看历史数据 (8)6.2.2 查看趋势图 (8)6.2.3 查看测量参数 (9)6.2.4 查看其他参数 (9)6.2.5 查看报警记录 (9)6.2.6 查看仪器状态 (10)6.3 服务 (11)6.3.1清洗 (12)6.3.2测量 (12)6.3.3校正 (12)6.3.4功能测试 (12)6.4 设置 (13)6.4.1 设置测量参数 (13)6.4.1.1量程选择 (14)6.4.1.2 测量间隔 (14)6.4.1.3 校正因子 (14)6.4.1.4 水泵启动时间 (14)6.4.1.5 样品静置时间 (14)6.4.1.6 报警上、下限 (14)6.4.1.7 做样前清洗开关 (14)6.4.1.8 自动打印开关 (14)6.4.1.9 报警开关 (14)6.4.2 设置其他参数 (14)6.4.2.1 清洗间隔 (15)6.4.2.2 校正间隔 (15)6.4.2.3 清洗时间 (15)6.4.2.4 校正时间 (15)6.4.2.5 系统时间校正 (15)6.4.2.6 语言选择 (15)6.4.2.7 屏保时间 (15)6.4.3 设置输出信号 (15)6.4.3.1 MODBUS 地址 (16)6.4.3.2 波特率 (16)6.4.3.3 模拟量20mA对应值 (16)6.4.3.4 电流类型 (16)6.4.3.5 错误电流 (16)6.4.3.6 电流测试 (16)第七章故障维修 (17)氨氮切阀电机安装步骤 (18)氨氮简明操作步骤 (18)第一章安全预防措施特别声明1.1 总则请在开机运行前认真阅读本手册，并严格按照本手册说明进行操作，尤其注意所有有关危险和谨慎问题的说明，请不要擅自维修、拆装仪器上任意组件，否则可能会导致对操作人员的严重伤害和对仪器的严重损伤。

富士通PRIMERGY RX4770 M4四路机架式服务器数据手册说明书

富士通PRIMERGY RX4770 M4四路机架式服务器数据手册说明书

数据手册 富士通PRIMERGY RX4770 M4四路机架式服务器数据手册富士通PRIMERGY RX4770 M4 四路机架式服务器数字化的后端动力富士通PRIMERGY 服务器将为您提供应对任何工作负载以及不断变化的业务要求所需的服务器。

随着业务过程的扩张，对于应用的需求也不断提高。

每个业务过程都有各自的资源足迹，因此您需要寻求一种方式优化计算，以便更好地服务用户。

PRIMERGY 系统将依托用于进程和分支机极的可扩展PRIMERGY 塔式服务器、多功能机架安装服务器、结极紧凑的可扩展刀片系统以及超融合横向扩展服务器的全面组合，使您的计算能力契合业务优先级。

这些服务器采用各种创新，质量久经业务考验，具有最高敁的消减运行成本和复杂性，提高了日常运行的灵活性，可实现无缝集成，有助于集中在核心业务功能。

富士通PRIMERGY RX 机架式服务器作为机架优化的灵活服务器，具有一流的性能和能敁，从而成为各数据中心的“标准”。

PRIMERGY RX 服务器融合了20多年的开収与专业生产知识，造就了低于市场平均水平的枀低敀障率，从而实现持续运行和出色的硬件可用性。

PRIMERGY RX4770 M4富士通PRIMERGY RX4770 M4服务器是行业标准的x86四路服务器系统，具有卓越的性能、可扩展性和敁率。

这种组合使服务器成为运行数据库和事务型应用程序、商业智能（BI ）工作负载、后端和内存数据库以及其他计算密集型应用程序的理想平台。

此外，该服务器还大幅简化DC 服务器的优化执行过程，如服务器虚拟化或整合。

采用最多28核的最新英特尔® 至强®可扩展系列处理器，推动此服务器实现全新的计算性能水平，可实现更高敁的业务成果。

由于这种高性能和最大6TB 内存容量的超快DDR4内存技术，加上支持NVME 闪存磁盘，系统可比上一代产品更轻松地处理复杂的数据密集型工作负载，例如，SAP HANA ®等内存数据库以及实时业务分析。

Dwyer 471B-1、473B-1、485B-1手持测试仪的中文说明书

Dwyer 471B-1、473B-1、485B-1手持测试仪的中文说明书

Models 471B-1/473B-1/485B-1 Handheld Test Instruments are versatile and compact units that quickly and easily measure a variety of air quality standards in imperial or metric units. Model 471B-1 is provided with the Dwyer AP1 thermo-anemometer probe and is able to measure air velocity or volumetric air flow, as wellas air temperature. Model 473B-1 is provided with Dwyer VP1 100 mm vane thermo-anemometer probe and is able to measure air velocity or volumetric air flow, as wellas air temperature and humidity. Model 485B-1 is provided with Dwyer RP1 thermo-hygrometer probe and is able to measure relative humidity and air temperature.AP1, RP1, and VP1 probes are automatically recognized when plugged into thehandheld, and can be interchanged without needing to adjust calibration• Universal base handheld compatible with Dwyer AP1 thermo-anemometer, RP1 thermo-hygrometer, and VP1 100 mm thermo- anemometer wired probes (sold separately)• Visible in any condition due to high contrast and backlit LCD display• Able to store up to 99 readings for later evaluation• Easy to transport when paired with the rugged aluminum case or protective soft case• Residential balancing• Commercial air balancing• HVAC inspections• Industrial process and dust collection system verification BENEFITS/FEATURES DESCRIPTION APPLICATIONSMODELS 471B-1/473B-1/485B-1 | HANDHELD TEST INSTRUMENTS®471B-1473B-1485B-1SPECIFICATIONSServiceDry, clean air.Temperature LimitsProcess: -20 to 212°F (-29 to 100°C); Ambient: 5 to 125°F (-15 to 51°C).Display4.5 digit backlit display.Air Velocity Range471B-1: 45 to 6000 FPM (0.23 to 30 m/s); 473B-1: 40 to 5000 FPM (0.32 to 25 m/s); 485B-1: N/A.Air Velocity Accuracy471B-1: ±3% FS; 473B-1: ±1.5% of reading ±20 FPM (±0.1 m/s) [0.25 to 10 m/s], ±1.5% of reading ±40 FPM (±0.2 m/s) [10 to 20 m/s], ±1.5% of reading ±60 FPM (±0.3 m/s) [20 to 25 m/s]; 485B-1: N/A.Volumetric Air Flow Range471B-1/473B-1: 19,999 in selected flow units; 485B-1: N/A.Temperature Range471B-1: -40 to 212°F (-40 to 100°C); 473B-1: -20 to 212°F (-29 to 100°C); 485B-1: -20 to 140°F (-28 to 60°C).Temperature Accuracy471B-1: ±0.5°F (±0.28°C) [32 to 122°F], ±1.5°F (±0.83°C) [Rest of range]; 473B-1/485B-1: ±0.9°F @ 77°F (±0.5°C @ 25°C).Relative Humidity Range471B-1: N/A; 473B-1/485B-1: 0 to 100% RH.Relative Humidity Accuracy471B-1: N/A; 473B-1/485B-1: ±2% RH @ 77°C (25°C) [10 to 90% RH].Probe Length8˝ (203 mm).Cable Length28˝ (71 cm) retracted; 6´ (183 cm) extended.Power Requirements9 V alkaline battery, installed non-functional, user replaceable.Weight471B-1: 16 oz (454 g); 473B-1: 18.4 oz (521 g); 485B-1: 16 oz (454 g).Agency Approvals CE.©Copyright 2021 Dwyer Instruments, Inc.Printed in U.S.A. 6/21 DS-471B-1_473B-1_485B-1 Rev. 2ORDER ONLINE TOD DWYER INSTRUMENTS, INC.Important Notice: Dwyer Instruments, Inc. reserves the right to make changes to or discontinue any product or service identified in this publication without notice. Dwyer advises its customers to obtain the latest version of the relevant information to verify, before placing any orders, that the information being relied upon is current.DIMENSIONS HOW TO ORDERSERIES471B: Hot wire thermo-anemometer test instrument473B: 100 mm vane thermo-anemometer test instrument485B: Thermo-hygrometer test instrumentPROBE LENGTH-1: 8˝ (203 mm)OPTIONS -COC: Certificate of calibration (473B only)-FC: Factory calibration (473B only)-NIST: NIST traceable calibration certificate473B -1-NISTUse the bold characters from the chart below to construct a product code.ACCESSORIESModelDescription A-47X-BOOTA-VPX-CKITAP1RP1UHH-C2VP1Protective magnetic rubber boot Vane hood kit Hot wire thermo-anemometer probe with coiled cable Thermo-hygrometer probe with coiled cable Hard carrying case 100 mm vane thermo-anemometer probe with coiled cable471B-1473B-1485B-16-1/32[153.25]6-11/64[156.59]2-13/16[71.44]16-11/64[410.61]6-5/32[156.52]5/814-23/64[364.92]6-1/32[153.16]2-13/16[71.44]16-3/4[425.62]6-1/32[153.16]4-13/64[106.65]2-13/16[71.44]6-5/32[156.52]。

清洁适合 CPA471 合壳退缩装置说明书

清洁适合 CPA471 合壳退缩装置说明书

TI00217C/07/EN/13.1271160974Technical InformationCleanfit CPA471Compact retractable assembly for installation of pH, ORP electrodes intanks or pipelinesApplication •Chemical industry •Wastewater treatment •Plant design•Tanks and process vats •Pipelines or pipesThis compact retractable assembly permits replacement of the electrode while the tank is full or under process conditions with pressures of up to 10 bar (145 psi). In connection with the complete system Topcal S CPC310 you can automatically clean and calibrate the electrodes.The material in contact with the medium is stainless steel.Your benefits•Compact design•Installation of 120-mm electrodes•Electrode can be cleaned and calibrated without interrupting the process; electrode life is extended•Reliable separation from process by stop bolt and O-ring seals •Simple removal and installation of electrode during ongoing process•Can be automated with a pneumatic or electric control systemCleanfit CPA4712Endress+HauserFunction and system designFunctionThe retractable assembly Cleanfit P CPA471 is intended for reliable in-process measurement of pH value and ORP. This assembly has been designed as a compact retractable assembly for the chemical industry, for plant design and for industrial wastewater treatment. Without having to interrupt the process, the electrode can be •separated from the process and moved into the rinse chamber manually or pneumatically •rinsed with water or cleaning solution•kept moist during interruptions in operation •removed •sterilized or •calibrated.The Cleanfit P CPA471 assembly is available with stainless steel 1.4404 (AISI 316L) as the material in contact with the medium. Depending on the application, you can choose•the short assembly version (for use with 120 mm gel electrodes or 225 mm liquid KCl electrodes, immersion depth up to 95 mm) or•the long assembly version (for use with 225 mm gel electrodes, immersion depth up to 201 mm). The most commonly used process connections are available (see section Process connections).Operating elementsM =S =M1M2S1S212345678Measuring ServicePneumatics "Assembly measuring"Limit position switch "Assembly measuring" Pneumatics "Assembly Service"Limit position switch "Assembly Service"Splash protection capAssembly housing (cylinder)Seals in contact with medium Retractable pipe Potential matching Stop boltRinse fitting (optional)Sensor holder (= sensor guide)Cleanfit CPA471Endress+Hauser 3Measuring system without controlMeasuring system with pneumatic controlMeasuring system without control (example)12Assembly CleanfitSpecial pH measuring cable, e.g. CYK1034Transmitter Mycom S CPM153 or Transmitter Liquiline M CM42Measuring system with pneumatic control 12345678pH/ORP sensor Assembly CleanfitTransmitter Mycom CPM153Special measuring cableCommunication / power supply cable Power supply Mycom Power supply CPG310Control unit CPG3109101112131415Canisters for cleaning and buffer solutions Superheated steam/water/cleaning solutions (optional)Rinse blockRinse water valve Power/signal cables Air hoses MediaCleanfit CPA471InstallationInstallation conditions The assembly is designed for installation on tanks and pipes. Special welded fittings are necessary for theinstallation (see chapter "Accessories").When using standard glass electrodes, only installation positions are permitted in which the middle axis of theCleanfit CPA471Endress+Hauser 5Pneumatic connections for automatic assembly actuationRequirements:•air pressure of 4 to 6 bar (58 to 87 psi)•air must be filtered (40μm) and be free of water and oil •no continuous air consumption•minimum nominal diameter of the air lines: 4mm (0.16 ")Caution!There must be a pressure-reducing valve upstream if the air pressure can increase to above 6bar (87 psi) (including any short pressure surges).We recommend you also use a pneumatic throttle for lower pressures. This results in a smoother assembly operation. Endress+Hauser offers such a throttle as an accessory (see chapter "Accessories").Rinse water connectionRinse water pressure: 2 to 6 bar (29 to 87 psi)2 x G ¼ (inner)2 x NPT ¼" (inner)Note!Prior to commissioning of the assembly the rinse water connections have to be connected to a cleaning system or secured by dummy plugs.EnvironmentAmbient temperatureAmbient temperature not below 0 °C (32 °F).The maximum permissible temperature for electric limit position switches (NAMUR type) is 90°C (194°F).ProcessProcess temperature 0 to 140 °C (32 to 284 °F)Process pressure0 to max. 4bar (0 to max. 58 psi) overpressure for manual actuation 0 to 10 bar (0 to 145 psi) overpressure for pneumatic actuationPressure/temperature diagramPressure-temperature diagramm A PA housing (manual actuation only)BStainless steel housing 1.4404 (AISI 316L)Cleanfit CPA4716Endress+HauserMechanical constructionDimensionsLong version for gel sensors *StrokeShort version for KCl sensors *StrokeCleanfit CPA471Endress+Hauser 7Process connectionsProcess connections (short version)A G1¼ internal thread with union nut B DN 50 dairy fitting C NPT 1" external thread DTriclamp 2"Short version for gel sensors *StrokeCleanfit CPA471Process connections (long version)A DN 50 flangeB G1¼ internal thread with union nutC DN 50 dairy fittingD NPT 1" external threadE Triclamp 2"8Endress+HauserCleanfit CPA471Endress+Hauser 9SensorsNote!The short version with flange DN 50 is suitable for compact block flanges only. Flanges with nozzle require the long version.Use liquid KCl electrodes with the short version only!Weight2.5 to 9 kg (5.5 to 19.8 lb), depending on cylinder material, on process connection and additional equipment, see product structureMaterialsLimit position switchesNote!The position of the input resp. the output may be different from the figure. Please, refer to the marks at the limit position switch: "1" is the input (in), "2" is the output (out).Certificates and approvalsCertificatesThe following certificates and approvals are available on request:•Manufacturer’s certificate •Ex approvalLimit switches The inductive limit switches meet the requirements of DIN EN 60 947-5-6 (NAMUR).Inspection certificateDepending on the version, an inspection certificate 3.1 acc. to EN10204 is supplied (--> product structure).Short versionpH glass electrodes, gel, 120 mm pH glass electrodes, KCl, 225 mm pH ISFET sensors, gel, 120 mm pH ISFET sensors, KCl, 225 mm Long versionpH glass electrodes, gel, 225 mm pH ISFET sensors, gel, 225 mmIn contact with medium SealsSensor holder Rinse fittingsEPDM / FPM / Kalrez ®SS 1.4404 (AISI 316L)SS 1.4404 (AISI 316L)Not in contact with medium CylinderElectric limit position switch PA / SS 1.4404 (AISI 316L)fore-part PBT, cable PVCPneumatic:3/2 way valve; thread M 12 x 1;connection for hoses with OD = 6 mm (0.24")Electric:inductive (NAMUR type); cable length: 10 m (32.8 ft);housing material: stainless steel; thread M 12 x 1;nominal voltage: 8 V0II 1G EEx ia IIC T6; switching distance: 2 mm, flushLimit position switches, left:pneumatic (1=compressed air inlet,2=compressed air outlet) right:electric (NAMUR)Cleanfit CPA471Ordering informationOrder code You can create a complete and valid order code on the Internet using the configurator tool.Enter the following address in your browser to access the product page:/cpa4711.You can choose from the following options on the product page located on the right:2.Click "Configure this product".3.The configurator opens in a separate window. You can now configure your device and receive thecomplete order code that applies for the device.4.Afterwards, export the order code as a PDF or Excel file. To do so, click the appropriate button at the topof the page.Product structure Drive type and limit contact switchesA Manual (cannot be converted to pneumatic)B Pneumatic without limit contact switches (suitable for retrofitting)C Pneumatic with 2 pneumatic limit contact switchesD Pneumatic with 2 electric limit contact switches (max. 90 °C / 194 °F)E Pneumatic with 2 electric Ex limit contact switches (max. 90 °C / 194 °F)Assembly version1Standard versionElectrode holderA For gel electrodes / ISFET sensors with Pg 13.5B For liquid KCl electrodes / ISFET sensors with Pg 13.5 hose connection headImmersion depth1Short version: up to 95 mm (depending on process connection)(possible electrode lengths: A = 120 mm, B = 225 mm)2Long version: up to 201 mm (depending on process connection)(possible electrode length: A = 225 mm)9Special version acc. to customerAssembly material (in contact with medium)A 1.4404 (AISI 316L) in contact with medium, with PA housing (manual operation only)B 1.4404 (AISI 316L) in contact with medium, with stainless steel 1.4404 (AISI316L) housing(max.10 bar / 145 psi at 100°C / 212°F)D 1.4404 (AISI 316L) in contact w. medium, with inspection certificate 3.1 acc. to EN10204,with 1.4404 (AISI 316L) housingSeal material (in contact with medium)1EPDM (preferred for food applications)2FPM(Viton®, preferred for process applications)3FFKM(KALREZ®)Process connectionA G 1¼ internal thread (union nut)B NPT 1" external threadC Tri-Clamp2"D Dairy fitting DN 50 (acc to. DIN 11 851)G DN50flangeH2"ANSI flangeOptional equipment1Without rinse connection (retrofitting not possible)3With rinse fitting 2 x G ¼ internal thread4With rinse fitting 2 x NPT ¼" internal threadCPA471-complete order code10Endress+HauserCleanfit CPA471Special materials Materials like Alloy C4, titanium, stainless steel 14571 (AISI 316 Ti), PEEK and conductive PVDF are availablematerials for the CPA472D assembly (see TI00403C/07/EN).Scope of delivery The scope of delivery comprises:•Cleanfit assembly (ordered version)•Operating Instructions (English)Endress+Hauser11Cleanfit CPA47112Endress+HauserAccessoriesIn the following sections, you find the accessories available at the time of issue of this documentation.For information on accessories that are not listed here, please contact your local service or sales representation.Pressure reducerPressure reducer kit•complete, incl. manometer and angle bracket; •order no. 51505755Pneumatic throttle for the reduction of the assembly moving speed,•G1/8 threaded connection •order no. 50036864Welded fittingsWelded fitting G1¼, straight,•SS 1.4435 (AISI 316L); order no. 51502798Welded fitting G1¼, angular 15°,•SS 1.4435 (AISI 316L); order no. 51502799Welded fittingsDummy plugDummy plug for G1¼ process connection,•SS 1.4435 (AISI 316L), FPM (Viton ®) seal, G1¼ internal thread; order no. 51502800Dummy plug for G¼ rinse connection,•SS 1.4404 (AISI 316L); order no. 50092264Hose nozzlesHose nozzles for rinse connections G¼, DN 12•SS 1.4404 (AISI 316L), 2 pieces •Order no.: 51502808Hose nozzles for rinse connections G¼, DN 12•PVDF, 2 pieces•Order no.: 50090491Cleanfit CPA471Flow vessel DN 25 flow vessel,•G1¼ external thread, SS 1.4404 (AISI 316L);•order no. 51502801Flow vesselProtection cover•On request at TSPLimit switches Set of pneumatic limit position switches (2 pieces);•order no. 51502874Set of electric limit position switches, Ex and non-Ex (2 pieces);•order no. 51502873Sensors Glass electrodesOrbisint CPS11/CPS11D•pH sensor for process applications•Optional SIL version for connection to SIL approved transmitters•With dirt-repellent PTFE diaphragm•Ordering per product structure (--> Online configurator, /cps11 or/cps11d)•Technical Information TI028C/07/ENOrbisint CPS12/CPS12D•ORP electrode for process applications•With dirt-repellent PTFE diaphragm•Ordering per product structure (--> Online configurator, /cps12 or/cps12d)•Technical Information TI367C/07/ENCeraliquid CPS41/CPS41D•pH sensor•With ceramics diaphragm and liquid KCl electrolyte•Ordering per product structure (--> Online configurator, /cps41 or/cps41d)•Technical Information TI079C/07/ENCeraliquid CPS42/CPS42D•ORP electrode•With ceramics diaphragm and liquid KCl electrolyte•Ordering per product structure (--> Online configurator, /cps42 or/cps42d)•Technical Information TI373C/07/ENCeragel CPS71/CPS71D•pH sensor•With double chamber reference system and integrated bridge electrolyte•Ordering per product structure (--> Online configurator, /cps71 or/cps71d)•Technical Information TI245C/07/ENEndress+Hauser13Cleanfit CPA471Ceragel CPS72/CPS72D•ORP electrode•With double chamber reference system and integrated bridge electrolyte•Ordering per product structure (--> Online configurator, /cps72 or/cps72d)•Technical Information TI374C/07/ENOrbipore CPS91/CPS91D•pH sensor•With open aperture for media with high dirt load•Ordering per product structure (--> Online configurator, /cps91 or/cps91d)•Technical Information TI375C/07/ENOrbipore CPS92/CPS92D•ORP sensor•With open aperture for media with high dirt load•Ordering per product structure (--> Online configurator, /cps92 or/cps92d)•Technical Information TI435C/07/ENISFET sensorsTophit CPS471/CPS471D•Sterilizable and autoclavable ISFET sensor for food and pharmaceuticals, process technology,•water treatment and biotechnology;•Ordering per product structure (--> Online configurator, /cps471 or/cps471d)•Technical Information TI283C/07/ENTophit CPS441/CPS441D•Sterilizable ISFET sensor for media with low conductivity, with liquid KCl electrolyte;•Ordering per product structure (--> Online configurator, /cps441 or/cps441d)•Technical Information TI352C/07/ENTophit CPS491/CPS491D•ISFET sensor with open aperture for media with high dirt load;•Ordering per product structure (--> Online configurator, /cps491 or/cps491d)•Technical Information TI377C/07/EN14Endress+HauserCleanfit CPA471Endress+Hauser15TI00217C/07/EN/13.1271160974Printed in Germany / FM+SGML 6.0 / DT。