ECE 17
- 格式：pdf
- 大小：419.16 KB
- 文档页数：48
COUNTRY :E.C.E. © InterRegs Ltd 2007
ORIGINAL :UNITED NATIONS of August 14, 1970
E/ECE/324 )
E/ECE/TRANS/505 ) Rev.1/Add.16/Rev.4/Amend.1
August 6, 2007
STATUS OF UNITED NATIONS REGULATION
ECE 17
UNIFORM PROVISIONS CONCERNING THE APPROVAL OF:
VEHICLES WITH REGARD TO THE SEATS, THEIR ANCHORAGES AND ANY HEAD
RESTRAINTS
Incorporating:
04 series of amendments Date of Entry into Force: 28.01.90
Supplement 1 to the 04 series of amendments Date of Entry into Force: 26.01.94
05 series of amendments Date of Entry into Force: 26.12.96
06 series of amendments Date of Entry into Force: 18.01.98
07 series of amendments Date of Entry into Force: 06.08.98
Supplement 1 to the 07 series of amendments Date of Entry into Force: 17.11.99
Supplement 2 to the 07 series of amendments Date of Entry into Force: 13.01.00
Corr. 1 to the 06 series of amendments Dated: 10.03.99
Corr. 1 to the 07 series of amendments Dated: 08.03.00
Corr. 1 to Supplement 1 to the 07 series of amendments Dated: 27.06.01
Corr. 1 to Revision 4 to the 07 series of amendments Dated: 12.11.03
Corr. 2 to Revision 4 to the 07 series of amendments Dated: 23.06.04
Supplement 3 to the 07 series of amendments Date of Entry into Force: 11.06.07
COUNTRY :E.C.E. © InterRegs Ltd 2007
ORIGINAL :UNITED NATIONS of August 14, 1970
E/ECE/324 )
E/ECE/TRANS/505 ) Rev.1/Add.16/Rev.4/Amend.1
August 6, 2007
TITLE: Approval of Seats, Anchorages Regulation No. 17
and Head Restraints Aug/2007 PAGE: 1
UNITED NATIONS
AGREEMENT
CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS FOR
WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED AND/OR BE USED
ON WHEELED VEHICLES AND THE CONDITIONS FOR RECIPROCAL RECOGNITION OF
APPROVALS GRANTED ON THE BASIS OF THESE PRESCRIPTIONS (*)
(Revision 2, including the amendments which entered into force on October 16, 1995)
Addendum 16: Regulation No. 17
Revision 4 − Amendment 1
Incorporating all valid text up to:
Corrigendum 2 to Revision 4 of the Regulation, subject of Depositary Notification
C.N.1035.2004.TREATIES-1 dated October 4, 2004
Supplement 3 to the 07 series of amendments − Date of entry into force: June 11, 2007
UNIFORM PROVISIONS CONCERNING THE APPROVAL OF VEHICLES WITH REGARD TO THE
SEATS, THEIR ANCHORAGES AND ANY HEAD RESTRAINTS
(*) Former title of the Agreement: Agreement Concerning the Adoption of Uniform Conditions of Approval and Reciprocal Recognition of Approval for Motor Vehicle Equipment and Parts, done at Geneva on March 20, 1958. COUNTRY :E.C.E. © InterRegs Ltd 2007
ORIGINAL :UNITED NATIONS of August 14, 1970
TITLE: Approval of Seats, Anchorages Regulation No. 17
and Head Restraints Aug/2007 PAGE: 2 REGULATION NO. 17
UNIFORM PROVISIONS CONCERNING THE APPROVAL OF VEHICLES WITH REGARD TO THE
SEATS, THEIR ANCHORAGES AND ANY HEAD RESTRAINTS
CONTENTS
REGULATION
1. Scope
2. Definitions
3. Application for Approval
4. Approval
5. Requirements
6. Tests
7. Conformity of Production
8. Penalties for Non-Conformity of Production
9. Modifications of the Vehicle Type and Extension of Approval with Respect to the Seats, their
Anchorages and/or their Head Restraints
10. Production Definitely Discontinued
11. Instruction for use
12. Names and Addresses of Technical Services Responsible for Conducting Approval Test, and of
Administrative Departments
13. Transitional Provisions
ANNEXES
Annex 1 Communication Concerning the Approval or Refusal or Extension or Withdrawal of
Approval or Production Definitely Discontinued of a Vehicle Type with Regard to the
Strength of the Seats and their Anchorages, in the Case Either of Seats Fitted or
Capable of being Fitted with Head Restraints, or of Seats not Capable of Being Fitted
with Such Devices and the Characteristics of Head Restraints Pursuant to
Regulation No. 17
Annex 2 Arrangements of Approval Marks
Annex 3 Procedure for Determining the 'H' Point and the Actual Torso Angle for Seating Positions
in Motor Vehicles
Annex 4 Determination of the Height and Width of Head Restraints
Annex 5 Details of Lines and Measurements Taken During Tests
Annex 6 Test Procedure for Checking Energy Dissipation
Annex 7 Method for Testing the Strength of Seat Anchorages and their Adjustment, Locking and
Displacement Systems
Annex 8 Determination of Dimension "a" of Head Restraint Gaps
Annex 9 Test Procedure for Devices Intended to Protect the Occupants against Displacement of
Luggage.
