油墨检测报告

油墨检测报告油墨检测报告是一项非常重要的服务，它能够帮助客户确认油墨的成分、含量和质量，以保证产品质量。

这份报告通常由专业的化验员进行，通过使用高级仪器和技术，来确定油墨中的组分及化学结构。

以下是三个油墨检测报告的案例：1. 印刷油墨中检测到较高的铅含量，通知厂家后，厂家淘汰了这批产品，并且采取措施调整生产，确保产品质量符合标准。

2. 在一家化妆品生产商使用的油墨里检测到了对人体有害的物质。

这家生产商采取了积极的措施，更换了油墨的供应商，并优化了油墨生产流程，以确保后续产品的质量。

3. 检测某企业包装油墨中汞含量较高。

经过向企业提供技术改进方案，公司成功地缩减了汞的含量，同时提高了生产效率，提高了产品的品质。

综上所述，油墨检测报告对于保障产品质量、保障消费者和环保等方面都有着至关重要的作用。

企业应该时刻注重质量控制，确保产品符合标准，并坚持商家道德，在生产中承担责任。

通过对油墨进行全面的检测，企业可以避免因使用质量不合格的油墨而引起的产品质量问题。

在竞争激烈的市场环境下，企业要保持竞争力，必须以高质量的产品和服务来取得客户的信任和忠诚度。

油墨检测报告还可以帮助企业遵守环保法规。

在许多国家和地区，已经有了对油墨中有害成分的严格限制。

通过对油墨进行全面检测，企业可以及时发现和解决存在的污染问题，实现环保和可持续发展目标。

最后，油墨检测报告不仅可以提高企业的市场声誉和品牌形象，而且可以减少企业因产品质量问题带来的经济损失和法律风险。

因此，企业应该时刻重视油墨检测报告，并通过不断改进和提高质量管理系统，为客户提供高质量的产品和服务，树立良好的企业形象和信誉度。

总之，油墨检测报告是一项重要的服务，对于提高产品质量、确保环保合规等方面都有着至关重要的作用。

企业应该在生产中始终把质量作为第一要素，注重油墨的质量控制，并采取积极的措施，改善和提升产品的质量和竞争力。

油墨检测服务的重要性不言而喻。

它能够为企业提供有力的保障，确保油墨的合格程度，从而保证产品质量、环保合规等方面，降低经济损失和法律风险。

Preliminary Report No. CANML1517955601 Date: 28 Oct 2015Page 1 of 5IMPORTANT: All results mentioned in this Preliminary document/report are PRELIMINARY results subject to changes or to confirmation in the FINALdocument/report. You shall therefore NOT RELY on this PRELIMINARY report as an official confirmation of such results.肇庆市扬光油墨有限公司肇庆市德庆县县城工业区精细化工专区The following sample(s) was/were submitted and identified on behalf of the clients as : UN R806 黑（JY ）SGS Job No. :SZIN1510010313PC - SZ Date of Sample Received :20 Oct 2015Testing Period :20 Oct 2015 - 26 Oct 2015Test Requested :Selected test(s) as requested by client.Please refer to next page(s).Please refer to next page(s).Test Method :Test Results :Signed for and on behalf ofSGS-CSTC Standards Technical Services Co., Ltd. Guangzhou BranchPreliminary Report No. CANML1517955601 Date: 28 Oct 2015Page 2 of 5 Test Part Description :.Specimen No.SGS Sample ID DescriptionSN1CAN15-179556.001Black liquidRemarks :(1) 1 mg/kg = 1 ppm = 0.0001%(2) MDL = Method Detection Limit(3) ND = Not Detected ( < MDL )(4) "-" = Not RegulatedPolycyclic Aromatic Hydrocarbons (PAHs).Test Method :With reference to AfPS GS 2014:01 PAK, analysis was performed by GC-MS.Test Item(s).CAS NO.Unit.MDL.001. Naphthalene(NAP)91-20-3mg/kg0.1ND Acenaphthylene(ANY)208-96-8mg/kg0.1ND Acenaphthene(ANA)83-32-9mg/kg0.1ND Fluorene(FLU)86-73-7mg/kg0.1ND Phenanthrene(PHE)85-01-8mg/kg0.1ND Anthracene(ANT)120-12-7mg/kg0.1ND Fluoranthene(FLT)206-44-0mg/kg0.1ND Pyrene(PYR)129-00-0mg/kg0.1ND Benzo(a)anthracene(BaA)56-55-3mg/kg0.1ND Chrysene(CHR)218-01-9mg/kg0.1ND Benzo(b)fluoranthene(BbF)205-99-2mg/kg0.1ND Benzo(j)fluoranthene(BjF)205-82-3mg/kg0.1ND Benzo(k)fluoranthene(BkF)207-08-9mg/kg0.1ND Benzo(a)pyrene(BaP)50-32-8mg/kg0.1ND Benzo(e)pyrene(BeP)192-97-2mg/kg0.1ND Indeno(1,2,3-c,d)pyrene(IPY)193-39-5mg/kg0.1ND Dibenzo(a,h)anthracene(DBA)53-70-3mg/kg0.1ND Benzo(g,h,i)perylene(BPE)191-24-2mg/kg0.1ND Sum of 7 PAHS Acenaphthylene. Acenaphthene,-mg/kg-ND Fluorene, Phenanthrene, Pyrene, Anthracene,FluorantheneSum of 18 PAHs-mg/kg-NDPreliminary Report No. CANML1517955601 Date: 28 Oct 2015Page 3 of 5Remark1: The result(s) shown is/are of the total weight of dried sample.Remark2: The sample name is required to be expressed in Chinese as the client cannotprovide its English name.Preliminary Report No. CANML1517955601 Date: 28 Oct 2015Page 4 of 5ATTACHMENTSPAHs Testing Flow Chart1) Name of the person who made testing: Sunny Hu2) Name of the person in charge of testing: Cutey YuSample cutting / preparationSample MeasurementSolvent extractionConcentration/DilutionFiltrationGC-MSDATAPreliminary Report No. CANML1517955601 Date: 28 Oct 2015Page 5 of 5 Sample photo:CANML1517955601CAN15-179556.001.SGS authenticate the photo on original report only*** End of Report ***IMPORTANT: All results mentioned in this Preliminary document/report arePRELIMINARY results subject to changes or to confirmation in the FINALdocument/report. You shall therefore NOT RELY on this PRELIMINARY report as anofficial confirmation of such results.。

油墨检测报告篇1ANSI 工艺和美术材料美术教育用颜料和油墨ASTM D2067-1997(2008)e1印刷油墨滴散物中粗粒的试验ASTM D4040-2010用落杆粘度计测定印刷油墨及载色剂流变性能的试验ASTM D4713-1992(2007)热固着液体印刷油墨系统不挥发成分的试验ASTM D4942-2011实验室混合器中水吸收石印油墨和载色剂试验ASTM D6073-2008a热固印刷油墨相对凝固性试验ASTM D6419-2000(2009)单张纸和卷筒纸胶印用油墨中挥发物含量试验ASTM D7188-2005(2010)印刷油墨、材料和工艺术语ASTM F362/F362M-1991(2010)e1测定油墨色带颜色可擦性的试验GB/T 1724-2019色漆、清漆和印刷油墨研磨细度的测定GB/T 12911-1991纸和纸板油墨吸收性的测定法GB/T 液体油墨颜色检验GB/T 液体油墨光泽检验GB/T 液体油墨细度检验GB/T 液体油墨粘度检验GB/T 液体油墨初干性检验GB/T 液体油墨着色力检验GB/T 液体油墨附着牢度检验GB/T 液体油墨抗粘连检验GB/T 胶印油墨颜色检验GB/T 胶印油墨着色力检验GB/T 胶印油墨流动度检验GB/T 胶印油墨结膜干燥检验GB/T 油墨粘性检验GB/T 油墨粘性增值检验GB/T 15962-2018油墨术语GB/T 18751-2002磁性防伪油墨GB/T 18752-2002热敏变色防伪油墨GB/T 18753-2002日光激发变色防伪油墨GB/T 18754-2002凹版印刷紫外激发荧光防伪油墨GB/T 26461-2011纸张凹版油墨GB/T 26395-2011水性烟包凹印油墨GB/T 26394-2011水性薄膜凹印复合油墨GB/T 26714-2011油墨圆珠笔和笔芯GB/T 30722-2014水性油墨颜色的表示GB/T 36650-2018光纤着色油墨GM 9985631-1988标签、带条热碳热敏油墨油墨检测报告篇2水性油墨主要由水性高分子乳液、有机颜料、表面活性剂、水及相关助剂经复合研磨加工而成。

油墨检测报告_无卤_卤素_元素_名称_浓度--本文来自网络无卤：中文名称；卤素报告英文名称：HF（Halogen Free）涉及元素：卤素(包括氟F、氯Cl、溴Br、碘I、砹At)限制元素：氟F、氯Cl限制标准：国际电工委员会(IEC)对无卤素的要求为：氯的浓度低于900ppm，溴的浓度低于900ppm，氯和溴的总浓度低于1500ppm.执行方案：各公司自行宣告执行，环保机构以及消费者监督。

Halogen（卤素）介绍：卤素是第ⅦA族非金属元素，包括了氟（Fluorine）、氯（Chlorine）、溴（Bromine）、碘（Iodine）和砹（Astatine）五种元素，合称卤素。

其中砹（Astatine）为放射性元素，人们通常所指的卤素是氟、氯、溴、碘四种元素。

卤素化合物经常作为一种阻燃剂：PBB ，PBDE ，TBBP-A ，PCB ，六溴十二烷，三溴苯酚，短链氯化石蜡等，应用于电子零组件与材料、产品外壳、塑胶等。

此种阻燃剂无法回收使用，而且在燃烧与加热过程中会释放有害物质，威胁到人类身体的健康、环境和下一代子孙。

因此在对卤素含量的限制上，各国都在采用相应的方法进行努力，这就是无卤化。

无卤概念的来源：欧盟(European Union)在欧盟电子电机中危害物资禁用(Restriction of the Use of Hazardous Substances in electrical and electronic equipment, 简称RoHS) 指令中决定在2006 年7 月1 日全面禁止PBB (Polybrominated Biphenyls) 及PBDE (Polybrominated Diphenyl Ethers) 等溴系阻燃剂的使用。

无卤的检测方法：通常采用氧弹燃烧-英蓝技术离子色谱法进行检测。

在封闭的氧弹燃烧仓内，待测的物质被充分燃烧，并被吸收液吸收，集成英蓝技术的离子色谱对样品进行自动前处理（如英蓝超滤）之后，进入到具有季铵盐型分离柱中，根据电负性的不同，各种卤族离子被分离出来并依次定量。

胶印油墨测试报告一、背景介绍胶印油墨是一种常用的印刷油墨，广泛应用于图书、报刊、包装等印刷行业。

为了确保印刷品的质量，对胶印油墨进行测试是非常必要的。

本测试报告旨在对胶印油墨的性能进行评估和分析。

二、测试目的本次测试旨在了解胶印油墨的颜色稳定性、光泽度、干燥时间以及附着力等关键性能指标，从而评估其适用性和质量。

三、测试方法1. 颜色稳定性测试：使用光谱仪对不同批次的胶印油墨进行颜色测量，比较其色差值，评估其颜色稳定性。

2. 光泽度测试：利用光泽度计对胶印油墨样品进行测量，获取其光泽度数值，用于评估其光泽度。

3. 干燥时间测试：使用干燥时间测试仪对胶印油墨进行干燥时间的测定，以确定其使用环境和工艺要求。

4. 附着力测试：利用附着力测试仪对胶印油墨的附着力进行评估，以判断其印刷品的耐久性和质量。

四、测试结果及分析1. 颜色稳定性测试结果显示，不同批次的胶印油墨色差值在可接受范围内，说明胶印油墨的颜色稳定性良好。

2. 光泽度测试结果表明，胶印油墨的光泽度在合理范围内，能够满足印刷品的要求。

3. 干燥时间测试结果显示，胶印油墨的干燥时间符合预期，适合在印刷过程中使用。

4. 附着力测试结果表明，胶印油墨的附着力良好，印刷品能够长期保持较好的质量和耐久性。

五、结论通过对胶印油墨的测试评估，可以得出以下结论：1. 胶印油墨的颜色稳定性良好，不同批次的色差值在可接受范围内。

2. 胶印油墨具有适当的光泽度，能够满足印刷品的要求。

3. 胶印油墨的干燥时间符合预期，适合在印刷过程中使用。

4. 胶印油墨具有良好的附着力，印刷品质量和耐久性较高。

六、建议根据测试结果，针对胶印油墨的性能，提出以下建议：1. 在生产过程中，要保证胶印油墨的颜色稳定性，严格控制色差值。

2. 注意调整胶印油墨的配方和工艺，以达到适当的光泽度要求。

3. 在印刷过程中，要合理控制胶印油墨的干燥时间，确保印刷品质量和生产效率。

4. 加强对胶印油墨的附着力测试，提高印刷品的耐久性和质量。

Test ReportNo.HKHL1210034574JLDate:OCT 30, 2012Page 1 of 8This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at /en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at /en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.ICONINKS LTDBLK B, 1/F, BOLD WIN IND. BLDG,16-18, WAH SING STREET,KWAI CHUNG,N.T., HONG KONGThe following samples were submitted and identified on behalf of the client as: POLYPLAST PY: PY001 BLACKPY010 TINTING BLACK PY021 WHITEPY030 TINTING WHITE PY025 OPAQUE WHITEPY064 LF LIGHT YELLOW / SERITONE YELLOW (GREEN SHADE) PY078 LF LIGHT CHROMEPY066 LF MID CHROME / SERITONE YELLOW (RED SHADE) PY114 LF DEEP ORANGE / SERITONE ORANGE PY199 WARM REDPY191 LF VERMILION / SERITONE RED (YELLOW SHADE) PY192 LF SCARLETPY164 SERITONE RED (BLUE SHADE) PY165 SERITONE MAGENTAPY127 DEEP VIOLET / SERITONE VIOLET PY126 MAGENTA PY203 MID BLUEPY230 SERITONE BLUE PY204 ROYAL BLUEPY205 MONASTRAL BLUE PY206 DEEP BLUE PY225 ULTRAMARINE PY283 BRIGHT GREEN PY325 SERITONE GREEN PY284 MONASTRAL GREEN PY461 NON TRANISHING GOLD PY462 SILVERPY500 OBLITERATING GREYPY052 PRIMOROSE / TRICHROMATIC YELLOW PY135 MAGENTA / TRICHROMATIC MAGENTA PY215 MONASTRAL BLUE / TRICHROMATIC BLUE PY383 VARNISHPY433 EL OVERPRINT VARNISH VA401 APR VARNISHPY802 EL DEEP ORANGE / SERITONEORANGEPY821 EL VERMILION / SERITONE RED (YELLOW SHADE)PY841 EL LIGHT YELLOW / SERITONE YELLOW (GREEN SHADE) PY843 EL MID CHROME / SERITONE YELLOW (RED SHADE) PY864 EL SERITONE RED (BLUE SHADE)PY236 REFLEX BLUETest ReportNo.HKHL1210034574JLDate:OCT 30, 2012Page 2 of 8This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at /en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at /en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.MATTPLAST MG: MG001 BLACKMG010 TINTING BLACK MG009 DENSE BLACK MG021 WHITEMG023 EXTRA OPAQUE WHITE MG030 TINING WHITEMG041 LIGHT YELLOW / SERITONE YELLOW GS MG080 LF MID CHROME / SERITONE YELLOW RS MG190 LF DEEP ORANGE / SERITONE ORANGE MG191 LF VERMILION / SERITONE RED YS MG192 LF SCARLETMG164 SERITONE RED BS MG165 SERITONE MAGENTAMG127 DEEP VIOLET / SERITONE VIOLET MG203 MID BLUEMG223 SERITONE BLUE RS MG230 SERITONE BLUE MG205 MONASTRAL BLUE MG206 DEEP BLUEMG283 BRIGHT GREEN MG325 SERITONE GREEN MG284 MONASTRAL GREEN MG381 EXTENDER BASE MG461 RICH PALE GOLD MG462 SILVERMG382 METALLIC INK MEDIUM MH052 TRICHROMATIC YELLOW MH135 TRICHROMATIC MAGENTA MH215 TRICHROMATIC BLUE MH004 TRICHROMATIC BLACKMH396 TRICHROMATIC EXTENDER BASESGS Case No. : HKHL121000020969 Style / Item No. : POLYPLAST PY AND MATTPLAST MG/MH Supplier : ICONINKS LTD Sample Receiving Date : OCT 18, 2012 Test Performing Date : OCT 18, 2012 – OCT 29, 2012Test Requested : Please refer to the result summary. Test Method & Results : Please refer to next page(s).Test ReportNo.HKHL1210034574JLDate:OCT 30, 2012Page 3 of 8This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at /en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at /en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.Result Summary : Test RequestedConclusion1. EN 71 Part 3:1994 + A1:2000/AC:2002 –Migration of Certain Elements (As per client’s request)PASS2. Standard Consumer Safety Specification for ToySafety, ASTM F963-11 Clause 4.3.5 (As per client’s request) PASS a) Soluble heavy metals in surface coating material PASS 3. CPSIA section 101(f)(1) and US 16 CFR 1303 –Lead in paint/similar surface coating material (As per client’s request)PASS4. European RoHS Directive 2011/65/EU Annex II;recasting 2002/95/EC (As per client’s request)PASSSigned for and on behalf of SGS Hong Kong Ltd.Che Wai Leuk, Jerry Section ManagerTest ReportNo.HKHL1210034574JLDate:OCT 30, 2012Page 4 of 8This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at /en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at /en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.Test Results : 1. EN 71 Part 3:1994 + A1:2000/AC:2002 – Migration of Certain ElementsMethod : With reference to EN 71 Part 3:1994 + A1:2000/AC:2002. Analysis was performed by InductivelyCoupled Argon Plasma – Atomic Emission Spectrometry.Result (mg/kg) Test Item1Reporting Limit (mg/kg) Permissible Limit(mg/kg) Soluble Lead (Pb) ND 5 90 Soluble Antimony (Sb) ND 5 60 Soluble Arsenic (As) ND 2.5 25 Soluble Barium (Ba) ND 10 1000 Soluble Cadmium (Cd) ND 5 75 Soluble Chromium (Cr) ND 5 60 Soluble Mercury (Hg) ND 5 60 Soluble Selenium (Se) ND 10 500 Comment PASS -- --Sample Description : 1. Green PaintNote : 1. mg/kg = milligram per kilogram2. ND = Not Detected3. Results shown are of the adjusted analytical resultTest ReportNo.HKHL1210034574JLDate:OCT 30, 2012Page 5 of 8This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at /en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at /en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.Test Results (Cont’d) : 2. Standard Consumer Safety Specification for Toy Safety, ASTM F963-11 Clause 4.3.5a) Soluble heavy metals in surface coating materialMethod : With reference to ASTM F963-11 Clause 8.3.2 – Soluble Elements Test Method. Analysis wasperformed by Inductively Coupled Argon Plasma – Atomic Emission Spectrometry.Result (mg/kg) Test Item 1Reporting Limit(mg/kg) Limit (mg/kg)Soluble Lead (Pb) ND 5 90 Soluble Antimony (Sb) ND 5 60 Soluble Arsenic (As) ND 2.5 25 Soluble Barium (Ba) ND 10 1000 Soluble Cadmium (Cd) ND 5 75 Soluble Chromium (Cr) ND 5 60 Soluble Mercury (Hg) ND 5 60 Soluble Selenium (Se) ND 10 500 Comment PASS -- --Sample Description: 1. Green PaintNote : 1. mg/kg = milligram per kilogram2. ND = Not Detected3. Results shown are of the adjusted analytical result.3. CPSIA section 101(f)(1) and US 16 CFR 1303 – Lead in paint/similar surface coating materialMethod : C PSC Test Method: CPSC-CH-E1003-09.1 ‘Standard Operation Procedure for Determining Lead (Pb)in Paint and Other Similar Surface Coatings’Individual Component ResultResult (%) Test Item1Reporting Limit (%) Permissible Limit(%) Lead (Pb) ND 0.002 0.009 Comment PASS -- --Sample Description : 1. Green PaintNote : 1. % = percentage by weight 2. 1% = 10000 mg/kg3. ND = Not DetectedTest ReportNo.HKHL1210034574JLDate:OCT 30, 2012Page 6 of 8This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at /en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at /en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.Test Results (Cont’d) : 4. European RoHS Directive 2011/65/EU Annex II; recasting 2002/95/ECCadmium, Lead, Mercury, Hexavalent Chromium, Polybromobiphenyl (PBB) and Polybromodiphenyl ether (PBDE) contentMethod : With reference to IEC 62321:2008. Lead, Cadmium and Mercury were analyzed by InductivelyCoupled Argon Plasma Spectrometry, Chromium (VI) was analyzed by UV-Visible Spectroscopy and PBB, PBDE were analyzed by Gas Chromatography – Mass Spectrometry (GC-MS).Result (mg/kg) Test Item1ReportingLimit (mg/kg) Permissible Limit (mg/kg) Cadmium (Cd) ND 5 100 Lead (Pb) ND 5 1000 Mercury (Hg) ND 5 1000 Hexavalent Chromium (Cr(VI)) ND 5 1000 Sum of PBBs ND -- 1000 Monobromobiphenyl ND 5 -- Dibromobiphenyl ND 5 -- Tribromobiphenyl ND 5 -- Tetrabromobiphenyl ND 5 -- Pentabromobiphenyl ND 5 -- Hexabromobiphenyl ND 5 -- Heptabromobiphenyl ND 5 -- Octabromobiphenyl ND 5 -- Nonabromobiphenyl ND 5 -- Decabromobiphenyl ND 5 -- Sum of PBDEs ND -- 1000 Monobromodiphenyl ether ND 5 -- Dibromodiphenyl ether ND 5 -- Tribromodiphenyl ether ND 5 -- Tetrabromodiphenyl ether ND 5 -- Pentabromodiphenyl ether ND 5 -- Hexabromodiphenyl ether ND 5 -- Heptabromodiphenyl ether ND 5 -- Octabromodiphenyl ether ND 5 -- Nonabromodiphenyl ether ND 5 -- Decabromodiphenyl ether ND 5 -- Comment PASS -- --Sample Description: 1. Green PaintTest ReportNo.HKHL1210034574JLDate:OCT 30, 2012Page 7 of 8This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at /en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at /en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.Test Results (Cont’d) :Note : 1. mg/kg = milligram per kilogram2. ND = Not DetectedFlowchart:Note : 1. For Cr(VI), spot test is adopted for metal sample.2. The Cd and Pb contents test on polymeric samples were dissolved totally by pre-conditioning method according to above flow chart.Test ReportNo.HKHL1210034574JL Date:OCT 30, 2012 Page 8 of 8This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at /en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at /en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.*** End of Report ***。

实验一油墨细度的检测1．实验原理油墨的细度表示油墨中颜料(包括填充料)颗粒的大小与颜料颗粒分布在连接料中的均匀度。

将油墨稀释后，用刮板细度计人眼测定颗粒研细程度及分散状况称为油墨细度，以μm表示。

(表示油墨颜料颗粒的最大直径的分布范围)2．实验器材(1)0～50微米刮板细度仪一套(每一刻度为2.5μm)；(2)0.lml吸墨管一支；(3)注射器(每刻度0.1m1)或滴定管一支；(4)调墨刀；(5)放大镜(5～10倍)；(6)6号调墨油(粘度140～160厘泊/25 oC)；(7)玻璃板一块；3．实验步骤(1)取墨：用吸墨管吸取或调墨刀取一定量的受试油墨(例如0.5m1)于玻璃板上。

(2)加调墨油调节油墨流动度：根据流动度的大小用注射器加入6号调墨油进行稀释。

稀释范围：流动度在24mm以下加18滴(或以每滴0.02ml计算，加上0.36m1)。

流动度在25～35mm加14滴（或加0.28m1)；流动度在36～45mm加10滴(或加0.20m1)，流动度在46mm以上不加油。

1．带有微米刻度的凹槽2．刮刀与刮板垂直90℃操作3.刮刀图1 刮板细度仪操作示意图(3)刮墨：用调墨刀把油墨油与试样油墨充分调合均匀，挑取已稀释均匀的油墨，置于刮板细度仪凹槽深度约50μm处，将刮刀垂直横置于细度仪凹槽处的油墨之上，刮刀保持垂直（如图1所示），双手均匀用力自上而下徐徐刮至零点处停止，使油墨充满刮板细度仪凹槽。

(4)细度观测：刮好后即将细度仪表面以30 o角斜对光源。

用5～10倍放大镜检视颗粒密集点数值(在一个刻度范围内超过15个颗粒的算深刻度数值，不超过15个颗粒的算浅刻度数值)。

4．注意事项(1)油墨稀释时，必须调匀，不能用力研磨。

防止掉入灰尘。

(2)双手横执刮刀时，用力不宜过猛，勿使一边偏重，细度板槽外两边油墨必须刮净。

(3)油墨细度检验需重复2-3次，取平均值，如果相差一刻度应重新测试。

(4)吸墨管、调墨刀、细度仪用后必须用软布或棉纱擦净，并涂油脂防止锈蚀。