当前位置：文档之家 › NC7SB3157P6X-NL中文资料

NC7SB3157P6X-NL中文资料

  • 格式：pdf
  • 大小：559.01 KB
  • 文档页数：14

NC7SB3157, FSA3157 Low Voltage SPDT Analog Switch or 2:1 Multiplexer/Demultiplexer Bus SwitchNC7SB3157, FSA3157 Low Voltage SPDT Analog Switch or 2:1 Multiplexer/Demultiplexer Bus SwitchNC7SB3157, FSA3157 Low Voltage SPDT Analog Switch or 2:1 Multiplexer/Demultiplexer Bus Switch Absolute Maximum Ratings(The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation.)Recommended Operating Conditions3Notes:2.The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed.3.Control input must be held HIGH or LOW, it must not float.Symbol Parameter Rating V CC Supply Voltage ()–0.5V to +7.0V V S DC Switch Voltage2–0.5V to V CC +0.5V V IN DC Input Voltage2–0.5V to +7.0V I IK DC Input Diode Current @ (I IK) V IN < 0V–50 mA I OUT DC Output Current 128 mA I CC/I GND DC V CC or Ground Current±100 mA T STG Storage T emperature Range–65°C to +150°C T J Junction T emperature under Bias150°C T L Junction Lead T emperature (Soldering, 10 seconds)260°C P D Power Dissipation @ +85°C180 mW ESD, Human Body Model4000V Symbol Parameter Rating V CC Supply Voltage Operating 1.65V to 5.5V V IN Control Input Voltage0V to V CC V IN Switch Input Voltage0V to V CC V OUT Output Voltage0V to V CC T A Operating T emperature–40°C to +85°C t r, t f Input Rise and Fall Time Control Input V CC = 2.3V–3.6V0 ns/V to 10 ns/V Control Input V CC = 4.5V–5.5V0 ns/V to 5 ns/VθJA Thermal Resistance350°C/WNC7SB3157, FSA3157 Low Voltage SPDT Analog Switch or 2:1 Multiplexer/Demultiplexer Bus SwitchDC Electrical CharacteristicsNotes:4.Measured by the voltage drop between A and B pins at the indicated current through the switch. On Resistance isdetermined by the lower of the voltages on the two (A or B Ports).5.Parameter is characterized but not tested in production.6. ∆ R ON = R ON max – R ON min measured at identical V CC , temperature and voltage levels.7.Flatness is defined as the difference between the maximum and minimum value of On Resistance over the specifiedrange of conditions.8.Guaranteed by Design.SymbolParameterConditionsV CC (V)T A = +25°CT A = –40°C to +85°CUnitsMinTyp MaxMinMax V IH HIGH Level 1.65 – 1.950.75 V CC0.75 V CC VInput Voltage 2.3 – 5.50.7 V CC0.7 V CCV IL LOW Level 1.65 – 1.950.25 V CC 0.25 V CC VInput Voltage 2.3 – 5.50.3 V CC0.3 V CC I IN Input Leakage Current0 ≤ V IN ≤ 5.5V 0 – 5.5±0.05±0.1±1µA I OFF OFF State Leakage Current 0 ≤ A, B ≤ V CC 1.65 – 5.5±0.05±0.1±1µA R ONSwitch On Resistance 4V IN = 0V , I O = 30 mA 4.53.07.07.0 Ω V IN = 2.4V , I O = –30 mA 5.012.012.0 Ω V IN =4.5V , I O = –30 mA 7.015.015.0 Ω V IN = 0V , I O = 24 mA 3.04.09.09.0 Ω V IN = 3V , I O = –24 mA 10.020.020.0 Ω V IN = 0V , I O = 8 mA 2.35.012.012.0 Ω V IN = 2.3V , I O = –8 mA 13.030.030.0 Ω V IN = 0V , I O = 4 mA 1.656.520.020.0 Ω V IN = 1.65V , I O = –4 mA17.050.050.0 ΩI CCQuiescent Supply Current All Channels ON or OFF V IN = V CC or GND I OUT = 0 5.5110µAAnalog Signal RangeV CCV CCV CC V R RANGEOn Resistance Over Signal Range 4, 8I A = –30 mA, 0 ≤ V Bn ≤ V CC 4.525.0ΩI A = –24 mA, 0 ≤ V Bn ≤ V CC 3.050.0I A = –8 mA, 0 ≤ V Bn ≤ V CC 2.3100I A = –4 mA, 0 ≤ V Bn ≤ V CC1.65300∆R ONOn Resistance Match Between Channels 4, 5, 6I A = –30 mA, V Bn = 3.15 4.50.15ΩI A = –24 mA, V Bn 2.1 3.00.2I A = –8 mA, V Bn = 1.6 2.30.5I A = –4 mA, V Bn = 1.151.650.5R flatOn Resistance Flatness 4, 5, 7I A = –30 mA, 0 ≤ V Bn ≤ V CC 5.0 6.0ΩI A = –24 mA, 0 ≤ V Bn ≤ V CC 3.312.0I A = –8 mA, 0 ≤ V Bn ≤ V CC 2.528.0I A = –4 mA, 0 ≤ V Bn ≤ V CC1.8125NC7SB3157, FSA3157 Low Voltage SPDT Analog Switch or 2:1 Multiplexer/Demultiplexer Bus Switch AC Electrical Characteristics Capacitance12Notes:9.Guaranteed by Design.10.This parameter is guaranteed by design but not tested. The bus switch contributes no propagation delay other than the RC delay of the On Resistance of the switch and the 50 pF load capacitance, when driven by an ideal voltage source(zero output impedance).11.Off Isolation = 20 log10 [V A / V Bn]12.T A = +25°C, f = 1 MHz, Capacitance is characterized but not tested in production.Symbol Parameter Conditions V CC(V)T A = +25°C T A = –40°C to +85°C Units Figure Number Min Typ Max Min Max t PHL,t PLH Propagation Delay Bus to Bus10V I = OPEN 1.65 – 1.95 3.5 3.5ns Figure 7Figure 82.3 – 2.7 1.2 1.23.0 – 3.60.80.84.5 – 5.50.30.3t PZL,t PZH Output Enable Time T urn on Time(A to B n)V I = 2 x V CC for t PZL V I = 0V for t PZH 1.65 – 1.957.023.07.024.0ns Figure 7Figure 82.3 – 2.7 3.513.0 3.514.03.0 – 3.6 2.5 6.9 2.57.64.5 – 5.5 1.7 5.2 1.7 5.7t PLZ,t PHZ Output Disable Time T urn Off Time(A Port to B Port)V I = 2 x V CC for t PLZ V I = 0V for t PHZ 1.65 – 1.95 3.012.5 3.013.0ns Figure 7Figure 82.3 – 2.7 2.07.0 2.07.53.0 – 3.6 1.5 5.0 1.5 5.34.5 – 5.50.8 3.50.8 3.8t B-M Break Before Make Time9 1.65 – 1.950.50.5ns Figure 92.3 – 2.70.50.53.0 – 3.60.50.54.5 – 5.50.50.5Q Charge Injection9C L = 0.1 nF, V GEN = 0V, 5.07.0pC Figure 10R GEN = 0Ω 3.3 3.0OIRR Off Isolation11R L = 50Ω, f = 10MHz 1.65 – 5.5–57.0dB Figure 11Xtalk Crosstalk R L = 50Ω, f = 10MHz 1.65 – 5.5–54.0dB Figure 12BW–3dB Bandwidth R L = 50Ω 1.65 – 5.5250MHz Figure 15THD T otal Harmonic Distortion9R L = 600Ω, 0.5 V P-P,f = 600 Hz to 20 KHz 5.0.011%Symbol Parameter Typ Max Units Conditions Figure Number C IN Control Pin Input Capacitance 2.3pF V CC = 0V C IO-B B Port Off Capacitance 6.5pF V CC = 5.0V Figure 13C IOA-ON A Port Capacitance When Switch Is Enabled18.5pF V CC = 5.0V Figure 14NC7SB3157, FSA3157 Low Voltage SPDT Analog Switch or 2:1 Multiplexer/Demultiplexer Bus SwitchNC7SB3157, FSA3157 Low Voltage SPDT Analog Switch or 2:1 Multiplexer/Demultiplexer Bus SwitchNC7SB3157, FSA3157 Low Voltage SPDT Analog Switch or 2:1 Multiplexer/Demultiplexer Bus SwitchNC7SB3157, FSA3157 Low Voltage SPDT Analog Switch or 2:1 Multiplexer/Demultiplexer Bus SwitchTape and Reel SpecificationTape Format for SC70Tape Dimensions inches (millimeters)Package DesignatorTape SectionNumber CavitiesCavity StatusCover Tape StatusP6XLeader (Start End)125 (typ)Empty Sealed Carrier 3000Filled Sealed T railer (Hub End)75 (typ)EmptySealedPackageTape SizeDIM ADIM BDIM FDIM K oDIM P1DIM WSC70-68 mm0.093(2.35)0.096(2.45)0.138 ± 0.004(3.5 ± 0.10)0.053 ± 0.004(1.35 ± 0.10)0.157(4)0.315 ± 0.004(8 ± 0.1)NC7SB3157, FSA3157 Low Voltage SPDT Analog Switch or 2:1 Multiplexer/Demultiplexer Bus SwitchTape Format for MicroPakTape Dimensions inches (millimeters)Package DesignatorTape SectionNumber CavitiesCavity StatusCover Tape StatusL6XLeader (Start End)125 (typ)Empty Sealed Carrier 5000Filled Sealed T railer (Hub End)75 (typ)EmptySealedTape Size A B C D N W1W2W38 mm7.0(177.8)0.059(1.50)0.512(13.00)0.795(20.20)2.165(55.00)0.331 + 0.059/–0.000(8.40 + 1.50/–0.00)0.567(14.40)W1 + 0.078/–0.039(W1 + 2.00/–1.00)NC7SB3157, FSA3157 Low Voltage SPDT Analog Switch or 2:1 Multiplexer/Demultiplexer Bus Switch Reel Dimensions inches (millimeters)6-Lead SC70, EIAJ SC88, 1.25mm Wide Package Number MAA06A NC7SB3157, FSA3157 Low Voltage SPDT Analog Switch or 2:1 Multiplexer/Demultiplexer Bus Switch Physical Dimensions inches (millimeters) unless otherwise notedPb-Free 6-Lead MicroPak, 1.0mm Wide Package Number MAC06A NC7SB3157, FSA3157 Low Voltage SPDT Analog Switch or 2:1 Multiplexer/Demultiplexer Bus SwitchNC7SB3157, FSA3157 Low Voltage SPDT Analog Switch or 2:1 Multiplexer/Demultiplexer Bus Switch。

合集下载

ITT CANNON连接器手册中文版

ITT CANNON连接器手册中文版


冲压成形加工 36
冲压成形加工 37-38
机械加工 42
传感器器型号2 插座
铜合金镀银
19芯 插头
19芯
法兰插座/锁紧螺母 /线对线
铜合金镀锡、镀银、 铜合金镀锡、镀银、
镀金
镀金
机械加工 43
冲压成形加工 45
冲压成形加工 46-48
APD / ISO 15170
系列 类型
插针材料
插针型号 页码
37芯 插头
RoHS合规信息
ITT在全球所有的电子元件工厂实施了严格的产品控制 计划，使得Cannon、VEAM和BIW连接器产品系列满足欧 盟指令2002/95/EC（又称“减少有害物质”计划）的要求， 对于适当、具体的Cannon、VEAM或BIW产品，订购时可 以为产品编号加上前缀R，确保我们的客户收到符合RoHS 的产品，应用于其商业电子元件和设备中。由于大多数的 RoHS有害物质集中在特定的金属镀层和铅焊涂层上，符合 RoHS的ITT产品提供以下镀层精饰：非电镀镍，不锈钢， 阳极氧化铝和镀金。请注意，在订购板载连接器时，我们 推荐使用镀金替代锡铅焊接。
1/2芯连接器的应用包括： •起重机 •船上厨房 •天线和基站的电力供应
电力分配： •卡车 •牵引车
电气参数
工作电压 工作电流 接触电阻 耐电压 绝缘电阻
机械参数 耐用性 插合扭矩 静负荷,自由状态
48 VDC* 请看温度-电流曲线 0,4mΩ（最大） 1000VAC， 60秒 10 MΩ（最小）
50次插配循环 2Nm（最大） 350 N (ISO 15170-2, Sec. 4.6)
Cannon ҹBKAD/E㋏߫ ᠽሩᴎᶊ੠䴶ᵓ 䖲᥹఼ˈᓎゟњ 㟾ぎ৆Ϟⱘ䞠⿟⹥
315VNSN820M35E中文资料(Nippon Chemi-Con)中文数据手册「EasyDatasheet - 矽搜」

315VNSN820M35E中文资料(Nippon Chemi-Con)中文数据手册「EasyDatasheet - 矽搜」


(at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated ripple current is applied for 3000 hours (2000 hours for F20mm products) at 105C. Capacitance change [P20% of the initial value DF (tanE) [200% of the initial specified value [The initial specified value Leakage current The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1000 hours at 105C without voltage applied. Capacitance change [P15% of the initial value [150% of the initial specified value DF (tanE) Leakage current [The initial specified value
22B25 1.00 22B25 1.20 22B30 1.35 22B35 1.50 22B40 1.67 22B45 1.78 22B50 2.04
30B20 1.15 30B20 1.20 30B25 1.50 30B25 1.67 30B30 1.78 30B30 2.04 30B35 2.30 30B40 2.55 30B45 2.90 30B60 3.49
艾雷斯科技工控产品

艾雷斯科技工控产品

尺寸（L×W）:202.00mm×245.00mm 工作温度:-10℃～60℃ 相对湿度:5%～90%@25℃（非凝露） 电源类型:ATX 电源
产品 5：ACS-4051VE
产品名 称： 产品型 号： 产品类 别：
ACS-4051VE
ACS-4051VE 嵌入式 PC104 板 卡系列
驱动下载
产品特点
● 网络接口：集成 1 个 INTEL 82562ET 和 1 个 82559ER（可选） ● 10/100M 自适应以太网控制器，RJ-45 接口
产品 3：ACS-6599
产品名 称： 产品型 号： 产品类 别：
ACS-6599 ACS-6599 网安主板
驱动下载
产品特点
采用 Intel？ E7520 +6300ESB 芯片组 >支持 双 Intel？Xeon？ 64 位处理器 >具备 8DDR2 内存扩展插槽，最大支持 16GB DDR2 400 的双通道内存架构 >具有 8 个 PCI-Express 接口的 Intel 82571EB 千兆位以太网接口 >一个 PCI_E X8 插槽 >一个 PCI_X 插槽 >一个 PCI 扩展槽 >多种存储介质选择：2 个串行 ATA（ＳＡＴＡ）通道，２个ＩＤＥ通道，1 个 Compact Flash （CF）卡插槽, 2 个 SCSI 接口 >支持 1-255 秒软件可编程看门狗计时器 性能参数: 优势: 处理器/高速缓存： 采用 socket604 mPGA 封装的至强处理器。 支持 1-2 颗英特尔？ 至强？ 处理器, 至强 64 位处理器具备 2MB 大容量二级缓存，支持超 线程 (HT) 技术、英特尔？ 64 位内存扩展技术 1 和英特尔增强型 SpeedStep？ 技术 2 可 与支持 64 位的操作系统和应用程序兼容；用较低的运作成本降低了功耗。 系统的前端总线 800M，运行频率为 2.8G-3.2G 的英特尔？ 至强 64 位处理器。 板载设备： 芯片组：Intel？ E7520 北桥芯片组，Intel？6300ESB 南桥芯片组 网络 板载显卡：ATI RAGE XL 显卡，板载 8M 显存 网络：采用 4 个 Intel？82571EB 芯片的 PCI-Express 千兆位以太网控制器 韧体芯片: SST49LF004A 4M bit Flash 芯片 超级 I/O: Winbond W83627 芯片;
NC7WZ07P6X_NL中文资料

NC7WZ07P6X_NL中文资料

© 2005 Fairchild Semiconductor Corporation DS500218March 1999Revised February 2005NC7WZ07 TinyLogic £ UHS Dual Buffer (Open Drain Outputs)NC7WZ07TinyLogic £ UHS Dual Buffer (Open Drain Outputs)General DescriptionThe NC7WZ07 is a dual buffer with open drain outputs from Fairchild's Ultra High Speed Series of TinyLogic £ in the space saving SC70 6-lead package. The device is fab-ricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad V CC operating range. The device is specified to operate over the 1.65V to 5.5V V CC range. The inputs and outputs are high imped-ance when V CC is 0V. Inputs tolerate voltages up to 7V independent of V CC operating voltage.Featuress Space saving SC70 6-lead packages Ultra small MicroPak ¥ Pb-Free leadless package s Ultra High Speed: t PZL 2.3 ns Typ into 50 pF at 5V V CC s High I OL Output Drive: 24 mA at 3V V CC s Broad V CC Operating Range: 1.65V to 5.5V s Matches the performance of LCX when operated at 3.3V V CC s Power down high impedance inputs/outputss Overvoltage tolerant inputs facilitate 5V to 3V translation s Patented noise/EMI reduction circuitry implementedOrdering Code:Pb-Free package per JEDEC J-STD-020B.Note 1: “_NL” indicates Pb-Free product (per JEDEC J-STD-020B). Device is available in Tape and Reel only.TinyLogic £ is a registered trademark of Fairchild Semiconductor Corporation.MicroPak ¥ is a trademark of Fairchild Semiconductor Corporation.Order Package Product Code Package DescriptionSupplied AsNumber Number Top Mark NC7WZ07P6X MAA06A Z076-Lead SC70, EIAJ SC88, 1.25mm Wide3k Units on Tape and ReelNC7WZ07P6X_NL (Note 1)MAA06A Z07Pb-Free 6-Lead SC70, EIAJ SC88, 1.25mm Wide3k Units on Tape and ReelNC7WZ07L6XMAC06AD3Pb-Free 6-Lead MicroPak, 1.0mm Wide5k Units on Tape and Reel 2N C 7W Z 07Logic SymbolIEEE/IECPin DescriptionsFunction TableY AH HIGH Logic Level L LOW Logic LevelConnection DiagramsPin Assignments for SC70(Top View)Pin One Orientation DiagramAAA represents Product Code Top Mark - see ordering codeNote: Orientation of Top Mark determines Pin One location. Read the top product code mark left to right, Pin One is the lower left pin (see diagram).Pad Assignments for MicroPak(Top Thru View)Pin Names Description A 1, A 2Data Inputs Y 1, Y 2OutputInput Output A Y L L HZNC7WZ07Absolute Maximum Ratings (Note 2)Recommended Operating Conditions (Note 3)Note 2: Absolute maximum ratings are DC values beyond which the device may be damaged or have its useful life impaired. The datasheet specifica-tions should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading vari-ables. Fairchild does not recommend operation outside datasheet specifi-cations.Note 3: Unused inputs must be held HIGH or LOW. They may not float.DC Electrical CharacteristicsSupply Voltage (V CC ) 0.5V to 7V DC Input Voltage (V IN ) 0.5V to 7V DC Output Voltage (V OUT ) 0.5V to 7VDC Input Diode Current (I IK )@ V IN 0.5V50 mA DC Output Diode Current (I OK )@ V OUT 0.5V 50 mA DC Output Current (I OUT ) 50 mA DC V CC /GND Current (I CC /I GND )r 100 mAStorage Temperature (T STG )65q C to 150q CJunction Temperature under Bias (T J )150q CJunction Lead Temperature (T L )(Soldering, 10 seconds)260q C Power Dissipation (P D ) @ 85q C180 mWSupply Voltage Operating (V CC ) 1.65V to 5.5V Supply Voltage Data Retention (V CC ) 1.5V to 5.5V Input Voltage (V IN )0V to 5.5V Output Voltage (V OUT )0V to 5.5VOperating Temperature (T A ) 40q C to 85q CInput Rise and Fall Time (t r , t f )V CC 1.8V, 2.5V r 0.2V 0 ns/V to 20 ns/V V CC 3.3V r 0.3V 0 ns/V to 10 ns/V V CC 5.0V r 0.5V 0 ns/V to 5 ns/VThermal Resistance (T JA )350q C/W Symbol ParameterV CC T A 25q CT A 40q C to 85q C Units Conditions(V)Min TypMaxMin MaxV IH HIGH Level Input Voltage 1.65 to 1.950.75 V CC0.75 V CC V 2.3 to 5.50.7 V CC0.7 V CCV IL LOW Level Input Voltage 1.65 to 1.950.25 V CC 0.25 V CC V 2.3 to 5.50.3 V CC0.3 V CC I LKG HIGH Level Output 1.65 to 5.5r 5r 10P AV IN V IHLeakage CurrentV OUT V CC or GNDV OLLOW Level Output Voltage1.650.00.10.0VV IN V ILI OL 100 P A1.80.00.10.12.30.00.10.13.00.00.10.14.50.00.10.11.650.080.240.24VI OL 4 mA 2.30.100.30.3I OL 8 mA 3.00.160.40.4I OL 16 mA 3.00.240.550.55I OL 24 mA 4.50.250.550.55I OL 32 mAI IN Input Leakage Current 0 to 5.5r 0.1r 1.0P A 0 d V IN d 5.5V I OFF Power Off Leakage Current 0.0110P A V IN or V OUT 5.5V I CCQuiescent Supply Current1.65 to 5.51.010P A V IN 5.5V, GND 4N C 7W Z 07AC Electrical CharacteristicsNote 4:C PD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (I CCD ) at no output loading and operating at 50% duty cycle. (See Figure 2.) C PD is related to I CCD dynamic operating current by the expression: I CCD (C PD )(V CC )(f IN ) (I CC static).AC Loading and WaveformsC L includes load and stray capacitance Input PRR 1.0 MHz; t W 500 nsFIGURE 1. AC Test CircuitInput AC Waveform; t r t f 1.8 ns;PRR 10 MHz; Duty Cycle 50%FIGURE 2. I CCD Test CircuitFIGURE 3. AC WaveformsSymbol ParameterV CC T A 25q CT A 40q C to 85q C UnitsConditionsFigure (V)Min Typ Max Min Max Numbert PZLPropagation Delay1.65 1.8 6.611.5 1.812.6nsFigures 1, 31.8 1.8 5.59.5 1.810.5C L 50 pF2.5 r 0.2 1.23.7 5.8 1.2 6.4RU 500:3.3 r 0.30.8 2.94.40.8 4.8RD 500:5.0 r 0.50.5 2.3 3.50.5 3.9V I 2 x V CCt PLZPropagation Delay1.65 1.8 5.511.5 1.812.6nsFigures 1, 31.8 1.8 4.39.5 1.810.5C L 50 pF2.5 r 0.2 1.2 2.8 5.8 1.2 6.4RU 500:3.3 r 0.30.8 2.14.40.8 4.8RD 500:5.0 r 0.50.51.4 3.50.53.9V I 2 x V CCC IN Input Capacitance 0 2.5pF C OUT Output Capacitance 0 4.0pF C PDPower Dissipation 3.33pF(Note 4)Figure 2Capacitance5.04NC7WZ07Tape and Reel SpecificationTAPE FORMAT for SC70TAPE DIMENSIONS inches (millimeters)PackageTape Number Cavity Cover Tape DesignatorSection Cavities Status Status Leader (Start End)125 (typ)Empty Sealed P6XCarrier 3000Filled Sealed Trailer (Hub End)75 (typ)EmptySealedPackage Tape Size DIM A DIM B DIM F DIM K o DIM P1DIM W SC70-68 mm0.0930.0960.138 r 0.0040.053 r 0.0040.1570.315 r 0.004(2.35)(2.45)(3.5 r 0.10)(1.35 r 0.10)(4)(8 r 0.1) 6N C 7W Z 07Tape and Reel Specification (Continued)TAPE FORMAT for MicroPakREEL DIMENSIONS inches (millimeters)PackageTape Number Cavity Cover Tape DesignatorSection Cavities Status Status Leader (Start End)125 (typ)Empty Sealed L6XCarrier 5000Filled Sealed Trailer (Hub End)75 (typ)EmptySealedTape Size A B C D N W1W2W38 mm7.00.0590.5120.795 2.1650.331 0.059/ 0.0000.567W1 0.078/ 0.039(177.8)(1.50)(13.00)(20.20)(55.00)(8.40 1.50/ 0.00)(14.40)(W1 2.00/ 1.00)NC7WZ07 Physical Dimensions inches (millimeters) unless otherwise noted6-Lead SC70, EIAJ SC88, 1.25mm WidePackage Number MAA06A8N C 7W Z 07 T i n y L o g i c £ U H S D u a l B u f f e r (O p e n D r a i n O u t p u t s )Physical Dimensions inches (millimeters) unless otherwise noted (Continued)Pb-Free 6-Lead MicroPak, 1.0mm WidePackage Number MAC06AFairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications.LIFE SUPPORT POLICYFAIRCHILD ’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein:1.Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be rea-sonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support device or system whose failure to perform can be rea-sonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.。