cx700e选购指南

Safety Guide:For more information on operating your PowerStage™ 700, please visit/power-manuals#powerstage700WARNINGTo reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture.This symbol of a lightning flash inside a triangle is intended to alert the user to the presence ofuninsulated “dangerous voltages” within the player’s enclosure that may be of a magnitude so as toconstitute a risk of electrical shock.This symbol of an explanation point inside a triangle is intended to alert the user to the presence ofimportant operating and safety information in the documents accompanying the player.This warning indicates that the marked surface and adjacent surfaces can attain temperatures thatmay be hot to the touch.This symbol indicates the proper attachment point for the protective earth safety ground. In thecase of any repairs being conducted by a qualified electrical repair technician, the wire connectingthe earth terminal of the IEC power socket to the chassis must be connected only to the attachmentpoint indicated by this symbol.See all safety markings on bottom/back of product.Important Safety Instructions1. Read this instruction manual in its entirety before operating the equipment. Keep the manual for future reference.2. Observe all safety precautions, warnings and instructions noted in this manual.3. WARNING – To reduce the risk of fire or electric shock, do not expose this equipment to moisture. Keep this device away from sources of water such as pools, bathtubs and sinks. Do not expose to rain, dripping/ splashing water or sprayed liquids. Do not place objects filled with liquids on the top.4. Unplug from power source before cleaning. Clean only with dry cloth.5. This product requires ventilation to operate properly. Do not block the fan opening or the vents on the side of the chassis. Maintain at least 4” clearance on all sides and top.6. Keep this product away from sources of heat and open flame such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.7. Make sure that the power cord is intact and undamaged before using it. Do not use cords with visible damage to the insulation or end connectors. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.8. This device is equipped with a safety feature that requires the use of a three-pin grounding plug. Do not defeat the safety purpose of the grounding plug by using an adapter or any other means such as removing the third, grounding prong. If the provided plug does not fit your outlet, consult an electrician about replac-ing an obsolete power outlet or obtain the proper IEC power cord for your area.9. Install in accordance with the manufacturer’s instructions.10. Do not attempt to operate if the unit has been damaged in any way.11. Only use attachments/accessories specified by the manufacturer.12. Unplug this apparatus during lightning storms or when unused for long periods of time.13. CAUTION – RISK OF ELECTRIC SHOCK! DO NOT OPEN! There are no user serviceable parts inside. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.14. WARNING – Due to the potential for hot surfaces and high sound pressure levels, this equipment is not suitable for use in locations where children are likely to be present.Compliance StatementNote: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try and correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.This device has been tested for and found to comply with Australia and New Zealand AS/NZS CISPR 22:2009.This device been tested and found to comply with Industry Canada ICES-003 Issue 6:2016. This device complies with CAN ICES-3B/NMB-3B.This device has been tested and found to comply with Europe’s EMC Directive 2014/30/EU. The standards applied were EN 55014-1:2006 (A1:2009 & A2:2011 included), EN 55014-2:2015, EN 61000-3-2:2014, EN 61000-3-3:2013 and EN 62233:2008.This device has been tested and found to comply with Europe’s product safety directive 2014/35/EU. The standard applied was EN62368-1:2014.Note: Any changes or modifications to this equipment not expressly approved by Seymour Duncan could void the user’s authority to operate this equipment.Recycling InformationThis symbol indicates this product is classified as Waste Electrical and Electronic Equipment (WEEE) in the European Union and should not be discarded with household waste. Other territories may vary.Before using your amplifier:Verify your AC Circuit Capacity:Under maximum load conditions this amplifier may require heavy current draw. To insure proper perfor-mance and avoid potential safety hazards, connect only to circuits that can provide a minimum of 15 amps of current. Avoid connecting to the same circuit as other high-current consumers such as heating devices, microwave ovens and high-wattage lighting as this may cause circuit breakers or fuses to blow. Avoid connecting any audio equipment to the same circuit as equipment with motors such as compressors, refrig-erators or air conditioners as this can cause high levels of unwanted noise in your sound or dips in power as motors start up.Set up:Place the unit on a firm, level surface. Do not plug or unplug an instrument or speaker while the amplifier is turned on.Heat and Ventilation:Make sure to allow space around the sides. Back and top for air circulation. Avoid use in extremely hot locations with direct exposure to sunlight or placement near heating equipment. Avoid use in moist or high humidity areas. Do not block fan opening or vent holes on the side. Allow for adequate air flow and do not place coats or blankets over the amplifier.Copyright © 2017 Seymour Duncan。

高性能1000-1500W连续激光器说明书武汉锐科光纤激光技术股份有限公司Wuhan Raycus Fiber Laser Technologies Co., Ltd.目录1 安全信息 (1)1.1 安全标识 (1)1.2 激光安全等级 (1)1.3 安全标识 (2)1.4 光学安全 (3)1.5 电学安全 (3)1.6 其他安全注意事项 (3)2 产品介绍 (4)2.1 产品特性 (4)2.2 型号说明 (4)2.3 装箱清单 (5)2.4 开箱及检查 (5)2.5 运行环境 (5)2.6 注意事项 (7)2.7 产品性能 (7)3 安装 (10)3.1 整机尺寸图 (10)3.1.1高性能1000-1500W连续激光器整机尺寸 (10)3.2 输出光缆的尺寸与安装 (11)3.2.1高性能1000-1500W连续激光器输出光缆 (11)3.3 冷却系统安装与要求 (12)3.4 安装注意事项 (13)4 产品使用 (15)4.1 前面板 (15)4.2 后面板 (15)4.3 电源连接 (16)4.4 接口定义 (16)4.4.1控制接口 (16)4.4.2 RS-232串口 (18)4.4.3以太网TCP/IP接口及连接步骤 (19)4.7 激光器的上位机功能 (22)4.7.1控制界面 (23)4.7.2日志界面 (24)4.7.3关于 (24)4.7.4语言选择 (25)4.7.5授权 (25)4.7.6模式选择 (26)4.7.7主控模块 (26)4.7.8电源监控 (27)4.8 控制模式选择 (28)4.8.1控制模式接线图 (28)4.8.2单机模式（内控模式）（顺序接上4.6） (29)4.8.3外控模式（顺序接上4.6） (29)4.8.4 AD模式 (30)4.8.5控制时序图 (31)4.8.6红光控制 (32)4.9 关闭操作顺序 (33)4.10 蓝牙APP操作说明 (33)4.10.1登录 (33)4.10.2连接 (33)4.10.3设备 (35)4.10.4 我的页面 (38)4.10.5软件介绍 (40)4.10.6工作流程 (40)5 常见警及处理措施 (41)5.1 告警显示 (41)5.2 告警处理 (41)6 质保及返修、退货流程 (44)6.1 一般保修 (44)6.2 保修的限定性 (44)6.3 技术支持及产品维修 (44)1安全信息感谢您选择锐科光纤激光器，本用户手册为您提供了重要的安全、操作、维护及其它方面的信息。

全定制多模式背光游戏系列A724E 数据手册USB 光学鼠标芯片版本号 1.00目录1.总体描述 (1)2.特性 (1)3.引脚排列 (2)4.引脚说明 (2)5.模块框图 (3)6.应用说明 (3)6.1 按键阵列定义 (3)6.2 自定义按键说明 (3)6.3 CPI设置 (4)6.3.1 档位与数值设置 (4)6.3.2 档位的LED指示 (4)6.4 背光LED (4)6.4.1 同步背光效果 (4)6.4.2 反应模式 (5)6.4.3 背光灯操控方法 (5)6.5 配置存储功能 (5)7.电器特性 (5)7.1 极限参数 (5)7.2 推荐的应用条件 (5)7.3 直流电气参数(电压VDD = 5.0V, 温度Temperature = 25 ºC ) (6)7.4 交流电气参数(电压VDD = 5.0V, 温度Temperature = 25 ºC) (6)8.传感器感光阵列排列图 (6)9.典型应用电路 (7)10.封装规格 (8)11.产品装配图 (9)12.修订记录 (9)1.总体描述全定制多模式背光游戏鼠标芯片A724E是一款高性能单晶片的CMOS工艺的传感器芯片。

此芯片应用于光电位移检测的USB鼠标中。

A724E基于连续运动图像识别算法技术，帧率最大6000fps，最大速度60inch/s，最大加速度15g，鼠标功能支持全方位自定义：CPI档位数量可自定义（最大6档）；CPI档位对应的分辨率可自定义（范围200~4800，共12级可选）；按键和滚轮可按用户需求定义成鼠标、键盘、多媒体、快捷方式功能，也可自定义宏（鼠标按键与移动、键盘、多媒体组合功能）。

在背光应用方面，A724E支持背光颜色自定义和6种背光模式，且用户可定义特定功能键切换背光模式。

A724E提供32KB以上的大容量存储空间，通过驱动程序自定义按键功能、CPI档位与分辨率以及背光效果、颜色等配置，并保存在存储器中，掉电后再上电使用时鼠标保持配置不变。

SEL‑700 系列保护继电器
产品系列
为您的电力系统提供坚固、 全面和可靠的保护
• 高速、安全和可靠的故障检测和定位功能，适用于各种保护应用。 • 5 英寸 800 × 480 彩色触摸屏显示器可直接监视和控制您的系统。 • 硬件经过验证，可在极端条件下可靠运行。 • 通用平台架构简化了设定、配置、调试和维护。
凭借我们长达十年的全球无条件保修和无与伦比的 技术支持，SEL‑700 系列继电器为机保护继电器
SEL‑700G 为同步发电机提供了全面的保护和同步 解决方案。通过内置的自动同步功能、灵活的输入/ 输出和高级通信，您可以淘汰复杂而昂贵的独立同 步器组件。
SEL‑700 系列—— 可靠的保护
SEL‑700 系列保护继电器能够可靠地保护和控制您的 电力系统，包括从发电机和变压器到馈线和电机。
SEL 继电器提供高速、安全、准确和可靠的故障定 位功能，以及全面的自动化和控制功能。各种通信 协议和媒介提供了灵活性，可与其他设备和控制系 统进行通信。
我们的硬件久经考验，其经设计和测试可在极端条 件下运行，包括存在震动、电磁干扰和电力系统环 境中常见的其他不利环境条件。可选的保形涂层在 腐蚀性环境中提供额外的保护。
馈线保护 提供全面的保护，其中包括反时限过电流、方向过 电流、过/低电压、自动重合闸、频率及更多其它 保护。
高阻抗故障检测
使用 Arc Sense™ 技术（电弧灵敏度技术，AST） 检测导体跌落，甚至可应用在导电不佳的表面 上。AST 检测并清除传统过电流元件可能无法检 测到的高阻抗故障（HIF），从而提供额外的保 护。AST 算法检测由许多高阻抗故障（HIF）产生 的电弧，并会警报或跳闸断路器。
发电机自动控制 SEL powerMAX® 电力管理和控制系统可调整发电 机的输出，管理对外连接，最大化系统可靠性，减 小电气扰动，并降低负荷减载需求。SEL‑700G 与 powerMAX 相结合，能够平衡发电负荷，控制联络 线电力潮流，并维持母线电压。