veritas使用手册

VERITAS9.0实用操作手册（经验版）Kernel ()目录●安装指南一、服务器端的安装二、服务器端的配置二、客户端的安装三、安装过程中的常见问题●应用指南一、WIN2000系统的备份/恢复1、提交备份作业1、恢复到同一台计算机上2、异机的恢复（恢复到到不同的计算机上）●SQL数据库服务器的备份与恢复1、仅仅数据库损坏，手工恢复系统库以及用户数据库2、灾难恢复SQL数据库3、重定向恢复数据库安装指南说明：本操作指南中使用的VRITAS的版本号为9.1.4691,是目前最新版的VERITAS EXEC版本。

本操作手册仅仅是一个快速入门手册，更详细的操作请参考《Veritas Exec用户参考手册》对于VRITAS9.0的安装有两种方式：升级安装和全新安装。

升级安装是指企业中原先在使用VRITAS8.6产品，那么你得到新的9.0产品时一般是VERITAS 公司的升级光盘，这个升级光盘是不能够全新安装的，只能从V8.6版本上升级到9.0。

在光盘的协议中会提供一组升级用的序列号。

这样就麻烦一些，要先安装V8.6然后再升级到9.0。

关键就是序列号的问题，因为只有升级序列号，如果有全新的序列号，那么就可以全新安装的。

因为在从V8.6升级到V9.0的时候，VERITAS会生成一组新的安装序列号。

因此只要把安装后的SN记录下来，就可以把升级安装变成全新的完全安装了。

全新安装问题会少很多,但是客户机必须要把原来的V8.6组件全部卸载掉，然后再安装V9.0组件。

安装前客户端和服务器端有几个前提要注意一下：1．MDAC的版本也有要求，要2.7以上，WINDOWS 2000 SERVER中的是2.6 看MDAC的版本号在注册表的：\HKEY_LOCAL_MACHINE\SOFTWARE\ Microsoft\DataAccess中可以看到。

2．介质服务器端需要的安装SQL2000客户端（注意是客户端，不是服务器端），主要是为了备份SQL2000 SERVER需要。

Veritas User Guide Quick Reference GuideTHANK YOU FOR VOTING TEXECOM THANK YOU FOR VOTING TEXECOMUSER GUIDESecurity Control PanelsIssue 21 INS167Overview Premier Series User Guide 2 INS221 IntroductionUsers of the alarm system will be assigned a unique 4, 5 or 6 digit User code. User codes are used to arm and disarm the system. Some User codes can also access additional options such as, system tests and omitting zones.Keypads will be installed throughout the premises, usually one at each entry/exit door. The keypads are used to perform all of the system operations i.e. Arming, Disarming etc. Most User codes can be used at any keypad on the system. However, Local Users will only be able to use certain keypads on the system.The Emergency KeysIn case of emergency, the alarm system can provide three immediate emergency alarms by pressing and holding two specific keys for two seconds. !"The emergency keys can be enabled/disabled for each keypad on the system.The Panic alarm can be programmed for either audible or silent operation.The Panic alarm can be programmed for either instant or delayed operation. Emergency AlarmPress KeysPanic Alarm (PA)! & " Fire# & $ Medical% & &The Quick Arm Keys The ‘Quick Arm’ keys allow the system to be armed without having to enter a User code first. !"The ‘Quick Arm’ keys will only work if the keypad has been programmed to allowarming in this way.To FULL arm the system, press '.To PART arm the system, press !, ( or " followed by ).Keypad LockThe keys on the keypad can be locked to prevent unwanted access to the system. !"The Emergency keys will NOT operate with the keys locked.To Lock the keys, press * and + together.To Unlock the keys, press * and + together again.Premier Serie s User Guide Overview INS221 3LED IndicatorsFive LED indicators have been provided to indicate the status of the system. LEDStatus Meaning PowerOn AC mains is present on the control panelFlashing AC Mains is not present, the control panel is running on the standby battery ServiceOn The system requires attention, contact your installerOff The system does NOT require attention ReadyOn All zones are secure and the system is ready to be armedOff One or more zones are activeFlashing The system has zones (with the ‘Force Omit’ attribute) that are active Info.On The system is armed (can also be programmed for other indications)Off The system is unarmed (can also be programmed for other indications) OmitOn One or more zones are omitted Off No zones are omittedZone Faults During ArmingBefore attempting to arm the system, ensure that the premises are secure (all doors and windows closed etc.) and the Ready light is on.If an attempt is made to arm the system with any zones active (e.g. door ajar, open window, etc.) the internal sounders will bleep repeatedly (fault tone) and the display will show the zones that are active.The fault tone will stop and the exit tone will resume when all zones are secure. If it is necessary to leave a zone open then it must be omitted (see page 8 for details). !"If an active zone cannot be secured then it may be ‘in fault’, in this case contact the alarm company immediately. Arm Fail - Failing to Arm If the exit procedure is started and zones are still ‘Active’ at the end of the exit procedure, an Internal alarm will occur (internal sounders only) and the strobe light on the external sounder will flash. !"If this occurs the arm fail must be cleared and the zone in fault identified before the system can be armed (see page 6 for details on clearing an Arm Fail). The Ready LED To help prevent faults during arming a Ready light has been provided, see table above for details on how the Ready LED operates.Operating the Alarm System Premier Series User Guide 4 INS221 To FULL Arm the SystemThe system is FULL Armed when ALL zones are ON (not omitted). !"Your Installer may have programmed the system so that it can be set by just pressing', if this is the case then there is no need to enter the User code below.1. Ensure that the premises are secure (all doors and windows closed etc.) and the Ready light is on2. Enter a valid User code ,,,,3. Press * to armThe exit tone will sound4. Leave the premisesWhen the system has armed the exit tone will stopTo PART Arm the SystemThe system is PART Armed , when ONE OR MORE zones have been left OFF (omitted) i.e. the landing or a bedroom. !"The system is only Part Armed when zones are omitted using the ‘Part Arm’ procedure(omitting zones manually (see page 8 for details) is not classed as Part Arming).The bottom line of the display is programmable for each Part Arm.Your Installer may have programmed the system so that it can be Part Armed by just pressing !, ( or " followed by ), if this is the case then there is no need to enter the User code below.1. Ensure that the premises are secure (all windows and doors not being omitted are closed) and the Ready light is on2. Enter a valid User code ,,,,3. Press )4. Use keys ! - " to select the required Part Arm5. Press * to arm normally or press - to arm silentlyThe exit tone will sound (if silent arm has not been selected)6. Leave the protected areaWhen the system has armed, the exit tone (if sounding) will stopPremier Serie s User Guide Operating the Alarm System INS221 5 To ARM Individual AreasIf the system has been split up into separate areas of protection i.e. Area 1 = House, Area 2 = Garage, Area 3 = Shed etc. These areas can be individually selected for FULL or PART arming as required. !"Areas are selected by using keys ! - . (the / key can also be used toselect an area followed by ' or +).Only areas that exist on the system can be selected. (A ‘Star’ means the area can be selected and a ‘Dot’ means the area cannot be selected).Pressing 0 will select/deselect all areas, pressing ' will toggle between the first 8 areas and the second 8 areas (where applicable).1. Ensure that the premises are secure (all windows and doors not being omitted are closed) and the Ready light is on2. Enter a valid User code ,,,,3. Press '4. Use keys ! - . to select the required areas5. Press * or - to FULL arm the areasOr5. Press )!, ( or " followed by * or - to PART arm the areas The exit tone will sound (if silent arm has not been selected)6. Leave the premisesWhen the system has armed, the exit tone (if sounding) will stop To DISARM the SystemThe entry time is divided into two sections, the Entry time and the 2nd Entry time. If the Entry time expires, an Internal alarm will occur and the 2nd Entry time will start. If the 2nd Entry time expires, an Intruder alarm will occur (all internal and external sounders). !"It is perfectly normal for the 2nd Entry time to be programmed as zero, in whichcase, an Intruder alarm will occur as soon as the Entry time expires.1. Enter the premises via the designated entry pointThe entry tone will start2. Enter a valid User code ,,,,The entry tone will stopOperating the Alarm System Premier Series User Guide 6 INS221 To DISARM the System When Not in Entry1. Enter a valid User code ,,,,2. Press * To CANCEL the Exit ModeOnce the exit mode has been started you should leave the premises immediately, however, if for some reason you decide not to leave, the exit mode must be cancelled.1. Enter a valid User code ,,,,2. Press *The exit tone will stop. To CLEAR an Arm FailWhen the system tries to arm with zones active (open), the internal sounders will sound and the external strobe will be flashing to indicate a problem. For details on preventing an Arm Fail condition, please refer to page 3. !"If you were not present when the Arm Fail occurred or you do not clear the ArmFail, the internal sounders will continue to sound and the external strobe will continue to flash.1. Enter a valid User code ,,,,The internal and external sounders will stop, the external strobe will continue to flash and the number of the zone that caused the Arm Fail will be displayed.2. Enter a valid User code ,,,, and press 12 To SILENCE an AlarmWhen an alarm occurs on the system, the internal and external sounders will normally sound for a pre-programmed time (normally 15 minutes). !"If you were not present when the alarm activated, the internal and externalsounders may have already stopped but the external strobe will still be flashing. When alarm information is being displayed, pressing the SCROLL key will slow down the display and also allow manual scrolling through the events.1. Enter a valid User code ,,,,The internal and external sounders will stop and the number of the zone that caused the alarm will be displayed.The alarm now needs to be reset.Premier Serie s User Guide Operating the Alarm System INS221 7 To RESET After an AlarmUSER ResetOnce the alarm has been silenced (see page 6 for details), the system will need to be reset. !"If the system has been programmed, to be reset by an Engineer, pressing 1 willnot return the display to normal, if this is the case see ENGINEER Reset for details. The system may have been programmed to be reset by Anti-code, if this is the case, see ANTI-CODE Reset for details.1. Enter a valid User code ,,,,2. Press 1The external strobe will stop, the system will chime and the display will return to normal. ENGINEER ResetIf the system has been programmed to be reset by an Engineer following an alarm activation, you will still be able to silence the alarm by entering a valid User code (see page 6 for details). !"The system cannot be armed again until the alarm has been reset.1. Contact the telephone number on the display (if programmed) or the telephone number on the last page of this User GuideANTI-CODE ResetIf the system has been programmed to be reset using an Anti-Code following an alarm activation, you will still be able to silence the alarm by entering a valid User code (see page 6 for details).!"The system cannot be armed again until the alarm has been reset.1. Enter a valid User code ,,,,2. Press 1The display will show a random code number i.e. 4281.3. Contact the telephone number on the display (if programmed) or the telephone number on the last page of this User Guide and quote the random code number You will be given a 4-digit Anti-Code i.e. 5624.4. Enter the Anti-code that has been given to you ,,,,5. Press *If the Anti-code is correct, the keypad will bleep to indicate that the system has been reset and the display will return to normal.Operating the Alarm System Premier Series User Guide 8 INS221 To OMIT ZonesIt is possible to exclude (omit) individual zones when arming i.e. if a zone is ‘in fault’. Users with access to this function can only omit zones that have been programmed as ‘Omittable’. !"If the zone can be omitted, there will be a ‘Star’ to the right of the zone number.Only zones that have the ‘Omit’ attribute assigned to them can be omitted.A ‘Star’ will appear to the left of the zone number to indicate that the zone has been selected for omitting.All omitted zones will be automatically reinstated the next time the system is disarmed, unless programmed otherwise.To re-instate zones manually, simply follow the instructions again. However, when the 3 key is pressed on this occasion, the zones will be re-instated.1. Enter a valid User code ,,,, and press 32. Enter the zone number ,,,3. Press 3 to omit the selected zoneRepeat for other zones if required.4. Press 4 when finishedContinue to arm the system as normal. The Turn CHIME On and OffThe system can be set up so that activating (opening) certain zones will cause the internal sounders to chime. This would normally be used on a front door, exit button etc. !"Zones will only cause the internal sounders to chime if they are selected for chime (see page Master User Guide for details on selecting which zones chime). Once a zone has been selected for chime, the Chime facility can be manually turned on and off as required.!"The system can also be programmed to automatically turn chime on and off under certain conditions i.e. certain times of the day, door left open etc.If no zones have been programmed for Chime, then turning Chime on and off will have no effect.To turn CHIME OnTo turn CHIME Off 1. Press -1. Press - The Chime tone will sound.The Error tone will sound.Premier Serie s User Guide Operating the Alarm System INS221 9 To CHANGE Your User CodeUsers with access to this option can change their own User codes. User codes are unique to each user and can be 4, 5 or 6 digits long.!"Only the User code that is entered to access the change code menu will be changed. Before changing your code, it is vital that you memorise or write down the new code you are about to program. Failure to remember your code will require an engineer visit to re-program a new code for you. This may incur a call-out charge.1. Enter the User code that requires changing ,,,,2. Press 43. Press *4. Press (5. Press *6. Enter a new 4, 5 or 6-digit User code ,,,,7. Press * to accept the new code8. Press 1 to exit the menuThe display will return to normal.Quick Reference Guide Premier Series User Guide10 INS221 OperationDescription Action To Full Arm the SystemEnter a valid User code ,,,, Press Yes (or press Chime to arm silently) * or - To Part Arm the System Enter a valid User code ,,,, Press Part ) Select Required Part Arm !, ( or " Press Yes (or press Chime to arm silently) * or - To Arm Individual Areas Enter a valid User code ,,,, Press Area ' Select Required Area using keys 1 - 8 ! - . Press Yes (or press Chime to arm silently) * or - To Disarm the System Enter a valid User code ,,,, Press Yes (if the entry mode was not started) *To Cancel the Exit Mode Enter a valid User code ,,,, Press Yes * To Clear an Arm Fail Enter a valid User code ,,,, Press Reset 1 To Silence an Alarm Enter a valid User code ,,,, To Reset After an Alarm Enter a valid User code ,,,, Press Reset 1 To Engineer Reset Contact Your Installation Company_____________ To Anti-code Reset Enter a valid User code ,,,, Press Reset 1 Contact Your Alarm Receiving Centre_____________ Quote 4-digit code shown on display !"#$%&'((((' Enter 4-digit code given by Receiving Centre ,,,, Press Yes *To Omit Zones Enter a valid User code ,,,, Press Omit 3 Enter Zone Number(s) ,,,… Press Menu when finished 3 Press Yes to Arm * Turn Chime On/Off Press Chime Once to Turn ON - Press Chime Again to Turn OFF - To Change User Code Enter a valid User code ,,,, Press Menu followed by Yes 4* Press 2 followed by Yes (* Enter a new 4, 5 or 6 digit User code ,,,, Press Yes to accept * Press Reset to return to the normal display 1Premier Series User Guide Installation DetailsINS221 11AreasNo. DescriptionExit TimeEntry Time 1Entry Time 2Bell DelayBell DurationAbort TimeSec. Sec. Sec. Min. Min. Sec. Sec. Sec. Sec. Min. Min. Sec. Sec. Sec. Sec. Min. Min. Sec.Sec.Sec.Sec.Min.Min.Sec.KeypadsEmergency Keys No. LocationArea Quick Arm PA Fire MedUser CodesUser Name Type Default New Code Area Time Lock 01 Master 5678N/AN/AN/AN/AN/AZonesPart ArmsNo. DescriptionType Area Omit 12 3Installation Company DetailsInstallation Engineer:Installation Company:Address:Telephone Number:Installation Date:Service RecordDate Serviced Comments EngineerEmergency Telephone NumbersFor 24 Hour Call Out For Anti-Code ResetControl PanelDetailsModel Premier 24 ❏Premier 48 ❏Premier 88 ❏Premier 168 ❏ Premier 640 ❏Location© TEXECOM LTD. 2000 - 2005INS221-2。

VERITAS NetBackup TM 管理维护手册VERITAS NETBACKUP (NBU) 简介NBU是Veritas 公司提供的企业级备份管理软件，它支持多种操作系统，包括UNIX、Microsoft Windows、OS/2以及Macintosh等。

目前,NBU是国际上使用最广的备份管理软件。

NBU采用全图形的管理方式，同时提供命令行接口，适应不同的用户需求。

它提供了众多的性能调整能力，从管理角度看，其高性能特征十分明显。

如提供多作业共享磁带机、大作业并行数据流备份、完善的监控报警、动态备份速度调整等能力，为用户的集中式存储管理提供了灵活和卓有成效的手段。

通过管理界面，管理员可以设置网络自动备份策略，这些备份可以是完全备份，也可以是增量备份。

管理员也可以手动备份客户端数据。

客户端用户可以从客户端备份(Backup)/恢复(Restore)/归档(Archive)自己的数据。

同时，NBU还管理存储设备。

如果采用磁带库，它可以驱动机械手（磁带库使用机械手作为磁带自动加载工具），管理磁带。

NBU 包括Server/Client软件：1．在需要连接存储设备（如磁带库或光盘库）的服务器上安装Server 软件。

2．在需要提供数据进行备份的机器上安装Client 软件。

Server 和Client 之间通过TCP/IP Sockets 通讯。

拓扑结构示意图如下：NBU基本概念1）Policy（备份策略）备份策略定义一台或几台服务器的备份方法。

它包括哪些服务器需要备份、备份哪些目录或文件、在什么时间备份、采用什么方式进行备份等。

配置NBU主要指定义备份策略。

2）Schedule（备份时间表）它用来定义在什么时间进行备份和归档的操作。

它用来定义做全备份，还是增量备份或者用户自己备份、是否归档，备份的频度，备份磁带保留多长时间，可以备份的时间段等。

3）Storage Unit（存储单元）存储单元指将备份作业按备份设备类型分组。

VERITAS-NetBackup管理操作手册VERITAS NetBackup TM 6.0 管理维护手册VERITAS NetBackup TM6.0 (2)VERITAS NETBACKUP (NBU) 简介 (4)NBU基本概念 (6)管理界面 (8)存储单元管理 (9)创建新的存储单元 (9)修改已有存储单元的属性 (14)删除已有的存储单元 (15)存储单元属性 (16)策略管理 (18)创建备份策略 (18)修改备份策略 (25)修改计划 (26)修改客户端设置 (28)手工备份 (29)目录管理 (31)察看报告 (31)状态监控 (33)拓扑监控 (34)作业监控 (35)服务监控 (37)进程监控 (37)驱动器监控 (38)VERITAS NETBACKUP (NBU) 简介NBU是Veritas 公司提供的企业级备份管理软件，它支持多种操作系统，包括UNIX、Microsoft Windows、OS/2以及Macintosh等。

目前,NBU是国际上使用最广的备份管理软件。

NBU采用全图形的管理方式，同时提供命令行接口，适应不同的用户需求。

它提供了众多的性能调整能力，从管理角度看，其高性能特征十分明显。

如提供多作业共享磁带机、大作业并行数据流备份、完善的监控报警、动态备份速度调整等能力，为用户的集中式存储管理提供了灵活和卓有成效的手段。

通过管理界面，管理员可以设置网络自动备份策略，这些备份可以是完全备份，也可以是增量备份。

管理员也可以手动备份客户端数据。

客户端用户可以从客户端备份(Backup)/恢复(Restore)/归档(Archive)自己的数据。

同时，NBU还管理存储设备。

如果采用磁带库，它可以驱动机械手（磁带库使用机械手作为磁带自动加载工具），管理磁带。

NBU 包括Server/Client软件：1．在需要连接存储设备（如磁带库或光盘库）的服务器上安装Server 软件。

VERITAS NetBackup TM 6.0管理维护手册VERITAS NetBackup TM6.0 (1)VERITAS NETBACKUP (NBU) 简介 (3)NBU基本概念 (5)管理界面 (7)存储单元管理 (8)创建新的存储单元 (8)修改已有存储单元的属性 (13)删除已有的存储单元 (14)存储单元属性 (15)策略管理 (17)创建备份策略 (17)修改备份策略 (24)修改计划 (25)修改客户端设置 (27)手工备份 (28)目录管理 (30)察看报告 (30)状态监控 (32)拓扑监控 (33)作业监控 (34)服务监控 (36)进程监控 (36)驱动器监控 (37)VERITAS NETBACKUP (NBU) 简介NBU是Veritas 公司提供的企业级备份管理软件，它支持多种操作系统，包括UNIX、Microsoft Windows、OS/2以及Macintosh等。

目前,NBU是国际上使用最广的备份管理软件。

NBU采用全图形的管理方式，同时提供命令行接口，适应不同的用户需求。

它提供了众多的性能调整能力，从管理角度看，其高性能特征十分明显。

如提供多作业共享磁带机、大作业并行数据流备份、完善的监控报警、动态备份速度调整等能力，为用户的集中式存储管理提供了灵活和卓有成效的手段。

通过管理界面，管理员可以设置网络自动备份策略，这些备份可以是完全备份，也可以是增量备份。

管理员也可以手动备份客户端数据。

客户端用户可以从客户端备份(Backup)/恢复(Restore)/归档(Archive)自己的数据。

同时，NBU还管理存储设备。

如果采用磁带库，它可以驱动机械手（磁带库使用机械手作为磁带自动加载工具），管理磁带。

NBU 包括Server/Client软件：1．在需要连接存储设备（如磁带库或光盘库）的服务器上安装Server 软件。

2．在需要提供数据进行备份的机器上安装Client 软件。

VERITAS教程VERITAS Volume Manager: 概述SUN的网站上面有一段关于VERITAS的摘录：VERITAS Volume Manager软件是一个高端系统级的磁盘/存贮阵列解决方案。

它可以实现简单的、在线的磁盘管理和配置，大大减少了系统维护的宕机时间。

该产品同样可以帮助你实现数据集成和高可靠性（快速恢复和容错性能）。

VERITAS Volume Manager软件也可以为企业电脑和新兴的SAN（Storage Area Network）提供易用、在线的存贮管理功能。

通过对RAID技术的支持，VERITAS Volume Manager软件提高了现有硬件的容错能力，防止磁盘和硬件故障。

它还提供逻辑Volume管理层，这样，VERITAS Volume Manager克服了物理磁盘的硬件限制。

也许，你已经注意到了。

但还是让我列出他们完全忽略了的事情：Support for: Simple, RAID0, RAID1, RAID0+1, RAID1+0, RAID5# Dynamic Multipathing (DMP): Load balancing and redundant I/O paths to disk arrays supporting multi-controller attachment.# Online Relayout: VERITAS allows you to change the layout of a VERITAS volume while it is live and mounted. Change a RAID0 to a RAID5 without a second of downtime!# Snapshoting: Take a snapshot of your data, creating a "shadow" of it which you can use for online backups.# Hot Relocation: Designate "spares" which will take the place of failed disks onthe-fly.# Dirty Region Logging (DRL): Volume transaction logs which provide fast recoveries after system crashes.# More...... more than I can list!那，我们开始吧！VERITAS Volume Manager是VERITAS公司（）的一个产品。

MyVeritas 使用指南Contents1.Navigating to MyVeritas (2)2.下载（Download） (2)3.激活(Active) (4)3.1.生成新的license file/key (5)3.2.Return License (10)3.3.查看已生成的license file/key (12)4.成员管理(Manage Members) (15)4.1.添加新成员(Member) (19)4.2.Inactive member (21)4.3.查看Inactive Member (24)4.4.Reactive Member (25)5.中小企业产品注册(Small Business Pack Registration) (25)6.Email Preferences (34)7.Product Preferences (35)1.Navigating to MyVeritashttps://或者在里选择 Menu > Customer Center > MyVeritas2.下载（Download）2.1.登录MyVeritas （如果有多个Account的话，选择对应的Account Name）2.2.选择权利 (Entitlement)选项卡2.3.选择需要查看的权利ID (Entitlement ID)或者通过Search的功能，放入对应的搜索条件，进行搜索权利ID : Entitlement ID产品名称 : Product Name权利类型 : Entitlement Type服务编号 : Service Contract服务类型 : Service Type合同编号 : EFLEX ContractIB实例编号: IB Instance Number旧版序列号 : Legacy Serial Number合作伙伴账号 : Partner Account Number2.4.需要哪个版本的Media，就点击对应版本的下载按钮2.5.如果选择下载选中的文件(Download selected files) 这个选项，则需要您加载Java插件，如果您不想安装Java，请您直接点击后方的文件名进行下载3.激活(Active)3.1.生成新的license file/key登录 MyVeritas选择授权许可(Licensing) 后点击权利 (Entitlements)如果有多个Account的话，选择需要访问对应的Account Name选择需要生成license file/key的权利ID (Entitlement ID)后针对需要生成license的软件版本，点击获取密钥(Get a key)点击Generate后，输入所需的数量再次点击Generate进行确认license key 或者license file将会生成并提供下载Depending on the license type, you can copy and paste from the screen, or download the file to your local machine.License key:Note:点击获取密钥(Get a key)后，可以看到多个选项卡，点击Files也可以下载安装介质3.2.Return LicenseThe License Portal will only allow you to generate licenses up to the quantity entitled, regardless of version. This means that to generate licenses for new versions, you may need to "Return" a license from a prior version. Returning licenses is an important element of making sure that your use of Veritas products is in compliance with your Entitlement. When you Return the license, you are indicating that you are no longer using this license, and that you understand that if you do continue to use the license that you Returned, you may be out of compliance with your Entitlement.选择对应的权利ID(Entitlement ID)点击获取密钥(Get a key)后，点击Return点击OK确认Return 成功后，可用数量增加 (Available Qty)3.3.查看已生成的license file/key选择需要查看的license file/key的权利ID (Entitlement ID)点击获取密钥(Get a Key)点击Link to Key后可查看到license key/file查看License Key或者License file:4.成员管理(Manage Members)The "Administration" tab lets you see your profile information, list other members in your account, and set your preferences.Profile:The "Profile" selection allows you to see your Email address, and lets you see and set your name in the Portal.Account Members:The "Account Members" selection allows you to see a list of all of the other members in your account. It will also allow you to identify which members are "Administrators". It also shows lists each member's privileges, including the ability to download software, and generate licenses. If you believe that you should have a permission that you don't currently have (such as to generate a license), contact one of the listed Administrators to request an update to your privileges.登录MyVeritas后，如果有多个Account的话，选择需要进行管理的Account，也可通过切换账户(Switch Account)进行更改选择Administration在Profile里可以更新名字，但是不能改邮箱地址选择Account Members在Account Members里，显示的是在对应Account里的成员(members)，如果有管理员(Administration)权限的话，可以进行Add member，Inactive member，modify permission of existing members的操作4.1.添加新成员(Member) 点击Add New Member完成以下信息，选择语言添加成功后，新的成员(member)会出现在Account Members下4.2.I nactive member点击Inactive输入Inactive的原因，然后点击提交(Submit)显示Inactive成功4.3.查看Inactive Member 选择Inactive点击需要查看的Member：4.4.R eactive Member先查看Inactive member，选择需要重新激活的member，然后点击Reactive Member *管理员 (Administration) 有权限进行这项操作5.中小企业产品注册(Small Business Pack Registration)5.1.登录MyVeritas如果没有MyVeritas的账号，请点击立即注册 (Register Now)进行申请用英文或者拼音完成以下信息5.2.申请完成并登录MyVeritas后，选择权利 (Entitlement)选项卡5.3.选择注册权利(Register an entitlement)5.4.输入序列号(Serial number)或者Entitlement ID, 和主要联系人(Primary Contact)，公司信息用英文或者拼音完成以下信息，电话号码栏只允许输入数字为何需要注册：注册后，您才能接收产品支持服务，定期产品更新以及Veritas针对您的产品发出的重要通知。

Veritas+Netbackup备份软件安装配置和维护⼿册Veritas Netbackup备份软件安装配置和维护⼿册⽬录第1章V ERITAS NETBACK6.0安装⼿册 (3)1.1 Veritas NetBackup6.0安装条件 (3)1.2 备份主服务器上安装Netbackup6.0 server软件和维护 (5)1.3 需要备份的主机上安装Netbackup Client客户端 (9)第2章N ETBACKUP维护和备份作业的制定 (12)[键⼊⽂字]第1章V ERITAS NETBACK6.0安装⼿册1.1V ERITAS N ET B ACKUP6.0安装条件安装之前，请确保windows服务器满⾜以下要求：◆安装 NetBackup 之前，删除系统中当前配置的其他任何供应商的备份软件。

其他供应商的备份软件会对 NetBackup 的安装和功能产⽣负⾯影响。

◆在基于 Windows 的服务器上安装 NetBackup 所需的系统配置：◆运⾏ Windows 2000 的 Intel Pentium 系统，内存不低于 516 MB，建议1GB以上，安装有 ServicePack 4 或者 Windows 2003 Server。

◆ Internet Explorer 5.0 或更⾼版本。

◆屏幕分辨率配置⾄少为 1024x768，颜⾊设置⾄少为 256 ⾊。

◆服务器的管理员帐户和密码。

◆⾜够的磁盘空间：VERITAS 建议您总共要有 5 GB 的存储空间，以容纳 NetBackup服务器软件和 NetBackup ⽬录。

◆ VERITAS 建议使⽤ NTFS 分区。

◆根据制造商的说明安装、且 Windows 软件能够识别的外围设备，如机械⼿设备和独⽴磁带机。

◆使所有服务器和客户机能够相互识别和相互通信的⽹络配置。

⼀般来说，如果可使⽤ping 命令从服务器访问客户机，则 NetBackup 的安装就可进⾏。

VERITAS NetBackup 使用手册VERITAS NETBACKUP (NBU 简介 NBU 是 VERITAS 公司提供的企业级备份管理软件,它支持多种操作系统,包括 UNIX 、 Microsoft Windows、 OS/2以及 Macintosh 等。

目前 , NBU是国际上使用最广的备份管理软件。

NBU 采用全图形的管理方式,同时提供命令行接口,适应不同的用户需求。

它提供了众多的性能调整能力,从管理角度看,其高性能特征十分明显。

如提供多作业共享磁带机、大作业并行数据流备份、完善的监控报警、动态备份速度调整等能力,为用户的集中式存储管理提供了灵活和卓有成效的手段。

NBU 还能跟 BMR 集成在一起为用户提供关键业务系统的智能灾难恢复,即无需安装系统,只需执行一条命令就能达到全自动系统恢复,整个过程也无需人工干预,是个简单易行的“傻瓜”过程,简化用户的恢复操作,尽快将应用投入使用, 减少用户因停机带来的巨大损失。

通过管理界面, 管理员可以设置网络自动备份策略, 这些备份可以是完全备份, 也可以是增量备份。

管理员也可以手动备份客户端数据。

客户端用户可以从客户端备份 (Backup/恢复 (Restore/归档 (Archive自己的数据。

同时, NBU 还管理存储设备。

如果采用磁带库,它可以驱动机械手(磁带库使用机械手作为磁带自动加载工具 , 管理磁带。

NBU 包括 Server/Client软件:1.在需要连接存储设备(如磁带库或光盘库的服务器上安装 Server 软件。

2.在需要提供数据进行备份的机器上安装 Client 软件。

NBU 支持 Master Server和 Media Server。

我们指连接磁带库的服务器为server 。

NetBackup 主服务器 (Master Server管理制定全网的备份策略, 控制所有的备份作业,是集中管理的核心。

Master Server可管理存储设备、控制备份 /归档策略和恢复操作。

VERITAS NetBackup TM 6.0管理维护手册VERITAS NetBackup TM6.0 (1)VERITAS NETBACKUP (NBU) 简介 (3)NBU基本概念 (5)管理界面 (7)存储单元管理 (8)创建新的存储单元 (8)修改已有存储单元的属性 (13)删除已有的存储单元 (14)存储单元属性 (15)策略管理 (17)创建备份策略 (17)修改备份策略 (24)修改计划 (25)修改客户端设置 (27)手工备份 (28)目录管理 (30)察看报告 (30)状态监控 (32)拓扑监控 (33)作业监控 (34)服务监控 (36)进程监控 (36)驱动器监控 (37)VERITAS NETBACKUP (NBU) 简介NBU是Veritas 公司提供的企业级备份管理软件，它支持多种操作系统，包括UNIX、Microsoft Windows、OS/2以及Macintosh等。

目前,NBU是国际上使用最广的备份管理软件。

NBU采用全图形的管理方式，同时提供命令行接口，适应不同的用户需求。

它提供了众多的性能调整能力，从管理角度看，其高性能特征十分明显。

如提供多作业共享磁带机、大作业并行数据流备份、完善的监控报警、动态备份速度调整等能力，为用户的集中式存储管理提供了灵活和卓有成效的手段。

通过管理界面，管理员可以设置网络自动备份策略，这些备份可以是完全备份，也可以是增量备份。

管理员也可以手动备份客户端数据。

客户端用户可以从客户端备份(Backup)/恢复(Restore)/归档(Archive)自己的数据。

同时，NBU还管理存储设备。

如果采用磁带库，它可以驱动机械手（磁带库使用机械手作为磁带自动加载工具），管理磁带。

NBU 包括Server/Client软件：1．在需要连接存储设备（如磁带库或光盘库）的服务器上安装Server 软件。

2．在需要提供数据进行备份的机器上安装Client 软件。