Omega-欧米茄海马系列海洋宇宙腕表 与您一同探寻水下世界

欧米茄背景资料自1848年成立至今，著名手表生产商欧米茄一直在制表领域中傲视同侪，从时计精确度、各类型比赛、运动项目计时、至专业太空手表和潜水表的设计奖项均屡创佳绩。

其它被广泛认同的成就包括：见证人类征服太空、先后22次担任奥运会的指定计时、创下多项精确计时纪录等。

除此之外，在1999年由英国制表大师佐治· 丹尼尔(George Daniels)研制的革命性同轴机芯，亦成为20世纪机械手表界的最重要发明之一。

展望未来，欧米茄将继续肩负重任，为北京2008年、温哥华2010年和伦敦2012年奥运会及伤残人士奥运会作大会的指定计时。

关于观澜湖成立于1994年，观澜湖高尔夫球会目前占地15平方公里，拥有12个来自五大洲高尔夫传奇人物签名设计的球场。

球场秉承“促进高尔夫交流、推动世界友好往来”的哲学。

尼克劳斯、皮特·戴、奥拉沙宝、埃尔斯、尼克·佛度、张连伟、大卫·利百特、格雷格·诺曼、尾崎将司、维杰·辛格、索伦斯坦和大卫·杜瓦尔全部都在这里创造了充满挑战，独树一帜的球场，形成了一个完善的高尔夫胜地，为人们带来了极致的高尔夫体验。

俱乐部拥有一个五星级的酒店以及世界级的水疗中心，2005年被国际高尔夫旅游协会（IAGTO）评选为“全球最佳高尔夫旅游度假地”，2006年则被《亚洲高尔夫月刊》的读者评选为：“亚洲最佳高尔夫旅游度假地”。

关于国际高尔夫协会1953年由加拿大实业家约翰·杰伊·霍普金斯创立，国际高尔夫协会过去五十余年来一直在努力完成“促进高尔夫交流、推动世界友好往来”的使命。

作为“世界杯”名字的所有者，国际高协六十年来一直支持着这一世界著名的国际团体高尔夫竞赛。

国际高协由管理委员会管理，其成员包括：主席庄念龙（美国运通主席顾问）、迪恩·碧曼（美巡赛前专员）、J.B.莫科（美国第一银行退休主席）、比尔·索德斯（施乐前执行副总裁及总监）。

世界名牌奢侈品手表欧米茄
一百五十年以来，欧米茄稳占世界制表业的先锋位置，奠定骄人成就。

在太空，超霸专业系列不单是唯一在月球上被佩戴的手表，更曾协助拯救太阳神13号的航天员，获太空总署颁发的[史诺比奖]（Snoopy Award）。

在运动方面，欧米茄是21届奥林匹克运动会（包括要求极度准确的游泳和竞赛项目）及于美
国、加拿大、澳洲及日本举行的自动赛车队制锦标赛（CART）的指定计时。

在欧米茄的世界，只有优质出众的手表方可被展示于逾一百三十个国家的高级橱窗里。

配戴欧米茄手表，代表成就与完美，欧米茄这个钟表业与广告业都闻名的名字源于希腊字母（omega），始于1848年，深受品味人士喜爱。

欧米茄在帆船、田径、游泳等世界级赛事中担任标准计时，并且常赞助欧洲高尔夫球赛，荣获奥运会指定计时器达三十一次之多。

欧米茄是第一只也是唯一一只在月球上被佩戴过的手表。

欧米茄更邀请一些名人作为形象大使，如我们所熟悉的一级方程式冠军舒马赫、花样滑冰冠军陈露、瑞士头号网球手辛迪斯、帆船赛手彼得布雷克爵士，高尔夫球手恩尼·艾斯、皮尔期·布鲁斯南、辛迪·克劳馥、任达华、琦琦等各界顶尖人士。

欧米茄手表官方网站,Omega欧米茄官网瑞士名表欧米茄手表在全球130个国家，透过优秀的经销商所出售的手表，每一块均是现代年青人“梦魅以求”的腕上时计，代表了他们对“欧米茄手表世界”的认同和追求。

在“欧米茄手表世界”里，有陪伴人类征空的超霸专业系列——第一块也是唯一一块“一步登月”的“月球表”(Moon Watch)；成为廿一届奥林匹克运动会的指定时计，获得无数准确时计及最佳设计的奖项。

欧米茄手表是全球杰出人士——包括国际名模辛迪?克劳馥及世界一级方程式冠军车手迈克尔?舒马赫的必然选择。

在美国，欧米茄手表是最受欢迎，最畅销的品牌手表。

由路易士·勃兰特始创于1848 年，欧米茄手表标志着制表历史上的光辉成就，傲视同侪。

产品早于1892 年，欧米茄手表推出全球第一块打簧手表，两年后，即1894年，生产了举世闻名的欧米茄手表19令机芯，这一机芯的制造融汇了当时革命性的先进技术，以其数项出色的功能，如以表冠调校时间，逐正式品牌命名为欧米茄手表，令到欧米茄手表成为当时瑞士首屈一指的制表厂商。

欧米茄手表是希腊字母中的最后一个字母，具有完美、成就、美轮美奂和卓越之意。

自此时起，欧米茄手表以其先进的科技结合卓越的制表艺术，稳占表坛的领导地位，创造了无数骄人的成就。

欧米茄手表官方网站:1848年路易士、勃兰特在瑞士小城拉绍德封市创立怀表组装工场。

1889年 LOUIS BRANDT&GILS公司于1880年迁往比尔市后，成为瑞士最大的制表商，雇员600人同，每年腕表产量达10万枚。

1894年 LOUIS BRANDT&GILS公司发明创新的“欧米茄手表19令机芯，之后公司以欧米茄手表为名。

1917-18年第一次世界大战期间，欧米茄手表担任英国皇家飞行军及美国陆军指定的腕表供应商。

1932年欧米茄手表在洛杉矶首次为奥运会提供计时服务，自此以后经常担任全球各地体育盛事正式计时。

1936年欧米茄手表创下泰丁敦天文台KEW-TEDDINGTON所有类别的计时精确度纪录。

VS厂欧米茄海马600米深海之王Deepsea-King全黑陶瓷腕表实拍测评大家好，我是一品说表。

今天给大家介绍的就是这款VS厂欧米茄海马600米深海之王Deepsea-King全黑陶瓷腕表。

VS厂自从去年推出压轴大作“深海之黑”全黑陶瓷壳腕表之后，凭借VS的超高工艺打造的全黑陶瓷壳技术让此款产品一经推出就迅速火爆整个市场，因其量少很长一段时间都供不应求。

这次这款深海之王除了全黑陶瓷壳镀了一层金色之外，更是采用皮带款，给喜爱皮带款的表友们带来福.利。

下面来看看这款VS厂欧米茄海马600米深海之王Deepsea-King全黑陶瓷腕表的实拍测评。

官方型号：欧米茄海马系列215.63.46.22.01.001腕表VS厂欧米茄海马600米深海之王Deepsea-King全黑陶瓷腕表直径为45.5毫米，整个表壳采用的是陶瓷材质，这一材质的运用堪称是开创之举。

陶瓷表壳经过打磨拉丝，使得陶瓷的金属感很强。

VS此款版本最大的一个特点就是和原版一样大胆采用一体成型陶瓷表壳，包括字面，表圈，表冠也采用陶瓷材质。

因为陶瓷不怕划，并不像钢，白金黄金铂金那样，佩戴半年一年的就很花了,陶瓷就不会出现这种情况，所以你不管戴多长时间，它都能保持非常新的状态。

高硬度的哑光黑色陶瓷，不存在氧化变色、汗水腐蚀掉色等问题，而且能够抵抗正常的日常磨蹭，就算拿金属螺丝刀在表壳上来回划动，都不出现划痕，但并不建议大家去划。

日常养护只需拿湿毛巾擦拭，又是焕然一新。

缺点是比较看佩戴者的佩戴方式，不能出现摔碰的现象，因为本身陶瓷就是硬脆的材质，出现摔碰可能会导致表壳断裂。

表镜采用弧拱形双面防反光耐磨损蓝宝石玻璃，通透度也是非常高的，刻字在陶瓷字面上清晰可见，字面与正品一致采用陶瓷材质，陶瓷字面比普通的铜板字面贵3倍，VS依旧采用高成本的陶瓷面，保证字面光亮度和平整度，完美诠释了顶级应有的水准。

黑色的表盘配以红色调18KSedna™金时标和指针，黑与金的碰撞尽显奢华高雅的风范。

如何确定我购买的是正宗欧米茄腕表？遵循如下步骤可以确定您购买的是正宗欧米茄腕表：- 只在欧米茄指定经销商处购买欧米茄腕表。

- 申请一张信用卡大小的保修卡，完整填写8位系列编号、手表编号以及经销商的完整姓名和地址。

- 如果您想确定腕表是否正宗，请携同欧米茄腕表及保修卡到指定的维修中心，让我们的维修服务员确定您购买的是否为正宗欧米茄腕表。

客户服务网络返回页首计时表（CHRONOGRAPH）与瑞士官方天文台认证腕表（CHRONOMETER）有何区别？计时表（CHRONOGRAPH）带有显示时、分和秒的指针，它们与机械系统一起透过中央计时指针测定逝去时间，可以记录到秒，并且具有30分钟和12小时定时装置。

瑞士官方天文台认证腕表（CHRONOMETER）是以不同角度，成功通过温度、精确度和防水功能测试后，获得COSC（瑞士官方天文台）正式颁发的等级证书的腕表。

通过这些测试至少需要15天时间。

返回页首计时腕表上的按钮具有什么功能？位于2点钟位置的按钮可以启动或停止计时功能，位于4点钟位置的按钮用于重新计时。

返回页首海马系列专业计时腕表的排氦气阀门具有什么功能？排氦气阀门由欧米茄为职业潜水员专门研发。

在深海潜水过程中，潜水员往往会在潜水钟内进行数天作业。

在到达水平面之前，潜水钟内充满氦气和氧气的混合气体。

氦气分子轻于空气，可以渗入手表，并在大气压力的作用下将水晶镜面推出。

在到达水平面之前打开氦气排放阀可以将氦气排放，从而防止手表进水。

返回页首自动上链机芯与手动上链机芯有何区别？自动上链机芯与手动上链机芯的区别在于上链方式的不同。

手动上链腕表需要每天人工上链，而自动上链腕表则具有内部摩打，利用手腕的运动来自动上链。

自动上链腕表通常具有至少40小时的动力储存，即使不佩戴手表，仍然能够备有足够的能量储存以保持稳定的运行。

返回页首欧米茄腕表是否具有防振功能？是。

欧米茄腕表可以承受重量为5000克的振动。

返回页首欧米茄腕表是否具有防磁性能？是。

海洋传奇：欧米茄海马系列佚名【期刊名称】《钟表》【年(卷),期】2016(000)001【总页数】6页(P84-89)【正文语种】中文欧米茄海马系列满载运动气息，颂扬着品牌的海洋传奇。

历年来的007电影中，詹姆斯·邦德都选择佩戴欧米茄海马系列，集强大功能与高雅气质于一身的海马系列是007的完美选择。

海马家族是欧米茄钟表文化中的重要元素，作为现代欧米茄手表四大系列之一，从1948年以来至今从未停止，一直延续发展到现在，在欧米茄历史发展中扮演了极其重要的角色，进一步的巩固了欧米茄手表的地位。

备受那些热爱冒险的船员和潜水爱好者青睐。

可以说海马系列是欧米茄体系中最为实用和热门的系列。

海马系列家族庞大，有海马300腕表、海洋宇宙600米腕表、AQUA TERRA 150米腕表、300米潜水表、BULLHEAD牛头表、PLOPROF1200米潜水表。

提到欧米茄的海马系列腕表，由于采用了强烈的运动元素和功能外观，并带有更多潜水表特征，例如更深的防水深度，可旋转的刻度表圈，计时功能，高可见度表盘，受到全世界表友们的喜爱。

早在19世纪30年代的时候，欧米茄就开始着手研究自主风格的防水表，一直到1948年，欧米茄推出了著名的系列Seamaster海马系列腕表，这个系列的推出可以说是比较适应当时的一个社会环境，那个时候二战刚刚结束，很多实用性腕表的需求非常大，特别是像潜水表，我们知道在20世纪40年代到70年代，潜水运动风靡世界，那段时间里很多品牌都推出了自己的潜水腕表。

回顾那段历史可以看到：早在1932年，欧米茄率先推出世界上第一款潜水表——海洋系列Marine，这款表曾作为第二次世界大战的军用时计。

1948年，海马系列Seamaster专业潜水表诞生，这款富有传奇色彩的表款在全世界获奖无数。

1957年，海马300米潜水表问世，开创了海马的潜水表时代。

1970年欧米茄推出海马专业600米潜水表，称为“PloProf （意为专业潜水）”，这款腕表开始面对专业潜水的排氦问题；1971年品牌推出的海马专业1000米潜水表，刷新了欧米茄深潜记录，品牌在2009年复刻了该款表，并命名为PloProf 1200米潜水表。

欧米茄Omega 超霸系列蓝宝石水晶镜面/日历/防水男士机械表3210.50.00
∙品牌：欧米茄
∙款式：男款
∙机芯：机械表
∙表形：圆形
∙表带：精钢
∙表盘：黑色
∙更多内容访问网站
【简介】
测速
日期显示
计时功能
小秒针计盘
获瑞士官方天文台认证
欧米茄超霸SPEEDMASTER系列：超霸男装手表于1957年面世，当时全为科学家及运动员提供准确计时而设。

而美国太空总署当年为筹备阿波罗登月任务，曾匿名购买不同品牌的计时表并加以严格测试，结果欧米茄超霸手表是唯一能够通过美国太空总署极严格测试后，被确定为适合陪同航天员勇闯太空的时计。

直到现
在，它仍是世界上唯一一只曾登陆月球的手表，亦是美国太空总署(NASA) 及苏联 (现称俄罗斯) 太空总署航天员升空计划的指定时计，迈克尔.舒马赫不愧为欧米茄超霸系列的名人大使，他在赛车场上所向披靡的表现，正如超霸系列腕表一样，当仁不让，无以伦比。

【信息】
品牌 : 欧米茄 OMEGA 型号 : 3210.50.00
产地 : 瑞士
款式 : 男款
机芯 : Omega 1164 自动
上链计时机芯
动力储存 : 44小时表面 : 圆弧形防反光、抗磨损蓝宝石水晶镜面
表壳 : 精钢表壳
表盘 : 黑色
防水深度 : 100米/330 英尺
尺码 : 40毫米
表带 : 精钢表链
包装 : 手表包装盒、相关文件、说明书、保修卡。

欧米茄：海马系列诞生70周年佚名【期刊名称】《钟表》【年(卷),期】2018(000)002【总页数】8页(P66-73)【正文语种】中文自1993年起，欧米茄海马系列300米潜水表凭借其传奇故事拥有众多腕表爱好者。

当年，这款腕表凭借超凡外观设计与专业潜水性能，宣告了欧米茄在潜水表制造领域的强势回归，品牌亦以此开始了与詹姆斯·邦德的长久合作。

25年后，欧米茄推出全新海马系列300米潜水表，以致敬海马系列腕表取得的非凡成就。

开创未来之路至臻天文台四年征途，创新从未止步2018年伊始，瑞士著名制表品牌欧米茄发布数款全新腕表，其精致设计与焕新外观必将令众多腕表爱好者青睐有加。

从全新设计的海马系列300米潜水表，到以奥运会为灵感的腕表，欧米茄以更丰富的表款、创新的材质和多样的配色不断发展各个腕表系列。

一直以来，引领欧米茄不断前行的始终是品牌对制表工艺的不懈追求。

2015年，欧米茄首次发布至臻天文台机心，实现了制表业精准度、性能以及防磁性的更高标准，迅速吸引媒体及消费者的广泛关注，他们对这一革命性创新的未来长期发展及规划充满期待。

2018年，欧米茄继续在至臻天文台之路上稳步发展，发布第12款和第13款全新至臻天文台机心。

精准可靠、性能非凡的至臻天文台机心为欧米茄机械腕表的设计与生产提供强大动力。

于去年揭幕的欧米茄全新工厂更令至臻天文台认证的测试效率得到大幅提升。

这正是欧米茄的制表精神。

自1848年品牌诞生至今的170年以来，生产精准可靠的机心始终是欧米茄制表的核心。

时至今日，欧米茄始终为其精准卓越的机心而倍感自豪。

2018年巴塞尔钟表珠宝展上，欧米茄推出的全新腕表在传承品牌悠久历史的同时，亦融入了诸多现代设计与创新工艺。

更重要的是，欧米茄着眼于至臻天文台表的发展，并始终致力于开发引领未来行业标准的全新机心。

欧米茄海马系列300米潜水表致敬25周年2018年，欧米茄全新海马系列300米潜水表全面革新了1993年原型表款的设计，并提供多达14款丰富的表款选择，其中6款以精钢材质打造而成，另外8款则采用精钢与K金混合材质。

***********************Servicing North America:U.S.A. Omega Engineering, Inc.Headquarters: Toll-Free: 1-800-826-6342 (USA & Canada only)Customer Service: 1-800-622-2378 (USA & Canada only)Engineering Service: 1-800-872-9436 (USA & Canada only)Tel: (203) 359-1660 Fax: (203) 359-7700e-mail:**************For Other Locations Visit /worldwideThe information contained in this document is believed to be correct, but OMEGA accepts no liability for any errors it contains, and reserves the right to alter specifications without notice.CONTENTS1. Introduction (1)1.1 Specification (1)1.2 ModelNumber (2)2. Operation (2)2.1 Principle (3)2.2 Precautions (4)3. Installation (5)Piping (5)3.1 General3.2 Strainers/Filters (7)and Installation Kits (7)Straighteners3.3 Flow4. Maintenance (8)4.1 General (8)Procedures (8)4.2 Cleaning4.2.1 Chemical Cleaning (8)Cleaning (8)4.2.2 Steam4.3 PickupCoil Testing (10)Shooting (11)4.4 TroubleAppendix A: DrawingTypical Assembly Sanitary Flowmeter with Installation Kit (12)1.IntroductionThe following information is provided for the proper installation and maintenance of your instrument.1.1 SpecificationsLinearity: ± 0.5% of reading over linear flow rangeRepeatability:± 0.1% of readingFlow Range: 0.35 to 650 gpmTemperature Range: -450 °F to +450 °F w/ Standard MAG coilSignal Output: 10 mVrms or greater into 10K ohm load at minimum flow rate.Materials of Construction: 316/316L Dual Rated Stainless Steel Rotor 17.4 PH SSRetaining Ring 15.7 MO PH SSBearings: Hard Carbon Composite Surface Finish: 32 micro inch finish End Fitting: Tri-Grip® Sanitary Type-1-1.2 Model NumberLinear FlowRangeWater Model No.FittingsLPM GPMMaxPressureDrop(psid)Lengthmm(in)NominalK-factorPulses/GalWeightkg(lb)FTB-401A 11/2″ TRI 1.32 to13.20.35 to3.53.090.4(3.56)15,000 3 lbsFTB-402A 11/2″ TRI 2.84 to28.40.75 to7.55.090.4(3.56)8,900 3 lbsFTB-403A 11/2″ TRI 4.73 to361.25 to9.55.290.4(3.56)5,800 3 lbsFTB-404A 11/2″ TRI 6.62 to611.75 to163.090.4(3.56)5,200 3 lbsFTB-405A 11/2″ TRI 9.5 to1102.5 to295.082.5(3.25)2,200 3 lbsFTB-406A 11/2″ TRI 15 to2274 to 60 5.190.4(3.56)840 3 lbsFTB-407A 11/2″ TRI 23 to3526 to 93 4.3116.5(4.59)400 4 lbsFTB-408A 11/2″ TRI 30 to4928 to 130 3.0116.5(4.59)230 4 lbsFTB-409A 2″ TRI 57 to85215 to2253.3154(6.06)120 7 lbsFTB-410A 21/2″ TRI 95 to151425 to4004.0254(10)97 8 lbsFTB-411A 3″ TRI 151 to246040 to6504.0254(10)45 12 lbsNote: Operating pressure is limited by the TRI fitting.-2-2.Operation2.1 PrincipleThe turbine flow sensor consists of a rotor assembly which is supported on a shaft held in place by triple tube clusters and secured with locking nuts within the flowmeter housing.The rotor is free to spin on a self lubricated ceramic ball bearing. A magnetic type pickup coil is attached on the exterior of the flowmeter housing.A low mass rotor design allows for rapid dynamic response. The deflector cones eliminate downstream thrust on the rotor and allows for dynamic positioning of the rotor between deflector cones.The dynamic positioning of the low mass rotor provides wider rangeability and longer bearing life than that of conventional turbine flowmeters. Integral flow straightening tubes minimize the effects of upstream flow turbulence.As the liquid flows through the flowmeter the rotor spins at rate proportional to the volumetric liquid flowrate.Each rotor blade passing through the pickup coil generates an electrical pulse. The frequency of the pulses is proportional to flowrate. The summation of pulses represents total amount of liquid volume passed through the meter.The number of pulses generated per unit of volume is called the calibration factor or K-Factor. This calibration factor is used to calculate flowrate and total amount of flow.Material Selection and ConstructionThe housing is made of 316 stainless steel. The rotor is made of 17.4 pH stainless steel. Bearings are composite hard carbon, FDA approved.-3-Flowmeter CalibrationsThe standard calibration provided with an Omega turbine flowmeter consists of a 10-point water calibration that is traceable to NIST. Based on this water calibration, we derive an average k-factor for water for the flowmeter.The uncertainty of this calibration is typically 0.1%.The K-factor on turbine flowmeters used on liquid service is NOT density dependent.2.2 Precautions♦Do not drop the meter. Dropping the meter may result in damage to the meter housing and/or internals.♦Do not operate the meter at flowrates greater than the maximum flowrate marked on the meter. Operating at flowrates greater than the maximum flowrate may over-spin the meter. Over-spinning may result in damage to the meter.CAUTION:Avoid over-spinning the meter. Over-spinning the meter may result in damage to the meter internals and lead to meterfailure.-4-3.InstallationCAUTION:Turbine meter has to be installed with pickup coil pointing down (see Appendix A) to ensure proper cleanability.Inspect all packages for any indications of damage which may have occurred during shipment.Verify that all meter parts or auxiliary components have arrived with the shipment. Refer to the packing list/invoice for a detailed list of items included in the shipment.3.1 General PipingIt is required to install meter with a minimum straight run of pipe approximately 10 pipe diameters ahead of the inlet and 5 pipe diameters following the outlet to avoid any effect of fluid swirls.The meter housing is marked by a flow direction arrow and the inlet is marked ‘IN’ and the outlet is marked ‘OUT’. The meter must be installed in the piping in the correct orientation to ensure the most accurate operation.Install meter with adequate distance and isolation from electric motors, transformers, welding equipment and solenoids to avoid any electromagnetic interference from ambient electrical field.When it is expected that flow will be intermittent, the meter should not be mounted at a low point in the piping system. Solids which settle or congeal in the meter may affect meter performance.-5-Blocking and Bypass valves should be installed if it is necessary to do preventive maintenance on the flowmeter without shutting down the flow system. The Bypass valve can be opened before the Blocking valves are closed allowing the flow to continue while removing the turbine flowmeter for service.IMPORTANT: All flow lines should be purged prior to installing the meter. To prevent possible damage to the meter, install themeter ONLY in flow lines that are clean and free of debris. Upon initial start-up of the system a spool piece should be installed in place of the flowmeter so that purging of the system can be performed to remove all particle debris which could cause damage to the meter internals. In applications where meter flushing is required after meter service, care should be taken as to not over-spin the meter, as severe meter damage may occur.CAUTION:Avoid over-spinning the meter. Over-spinning the meter may result in damage to the meter internals and lead to meterfailure.-6--7-To maintain an accurate flow measurement it is necessary to maintain a downstream pressure sufficient to prevent flashing/cavitation. Flashing of the liquid will result in an indication of flow significantly higher than the actual flow. In order to eliminate this condition adequate downstream pressure must be maintained. The minimum required downstream pressure may be calculated using the following equation:Downstream pressure may be maintained by a downstream valve that provides the necessary downstream pressure to prevent flashing/cavitation in the metering run.3.2 Strainers/FiltersTurbine flowmeters are designed for use in a clean fluid service. However, the service fluid may carry some particulate material which would need to be removed before reaching the flowmeter. Under these conditions a strainer/filter may be required to reduce the potential hazard of fouling or damage that may be caused by foreign matter.METER SIZEMESH SIZEPARTICLE SIZE(Maximum)¼” to ½”100 .0055 5/8” to 1¼”70 .008 1½” to 3”40.015If a strainer/filter is required in the system, it should be located upstream of the flowmeter taking care that the proper minimum distance is kept between the strainer and flowmeter.3.3 Flow Straighteners and Installation KitsProper application of the Omega FTB-400A Series Flowmeter requires a minimum inlet straight pipe run of 10 pipe diameters and a minimum outlet straight pipe run of 5 pipe diameters.Installation kits for the Omega FTB-400A Series Flowmeter consist of two lengths of appropriate tubing cut to a length appropriate for the upstream and downstream straight pipe run with appropriate end fittings. Flow straightening sections may be provided within the installation kit. ()()essure xVapor essureDrop x essure Minimum Pr 25.1Pr 2Pr +=4.MaintenanceProcedures4.1 CleaningThe Omega FTB-400A Series flowmeters have been designed to allow for cleaning by commercially accepted practices. These include removing the flowmeter from the line for cleaning in an approved fluid, flushing the line with an approved cleaning solution, and steam cleaning. With all cleaning methods, care must be taken to not over-spin the meter, as severe meter damage may occur.CAUTION:Avoid over-spinning the meter. Over-spinning the meter may result in damage to the meter internals and lead to meterfailure.4.2.1 ChemicalCleaningThe flowmeters may be chemically cleaned using an approved cleaning solution by removing the meter from the service line and using a bath or by flushing the meter in place.The hard carbon composite bearing designs used have been tested and found to be compatible with the following CIP fluids manufactured by Klenzade; Mandate, AC-300, AC-101, Principle, and XY-12.Following the cleaning operation, the cleaning solution should be flushed from the meter and/or service line with potable water to remove the chemically active cleaning solution.Care should be taken to ensure that flowrates occurring during chemical cleaning do not exceed the flow capacity of the flowmeter.4.2.2Steam CleaningSteam cleaning is only recommended for meters with hard carbon composite bearings.The steam flow velocity during the cleaning should not exceed 1/3 of the maximum liquid flow capacity of the flowmeter.-8-Steam Cleaning Rates at Various Steam PressuresMeter Size 50 psigPPH175 psigPPH1100 psigPPH1125 psigPPH1VelocityFPS2RateGPM31/4 1.25 1.70 2.25 2.50 1.72 1.05 3/8 2.70 3.67 4.75 5.39 3.68 2.25 1/2 3.50 4.73 6.14 7.00 4.74 2.90 5/8 5.78 7.82 10.20 11.50 5.02 4.80 3/4 10.50 14.20 18.40 20.90 6.32 8.701 21.70 29.40 38.10 43.10 7.35 18.001¼ 33.70 45.70 59.30 67.10 7.32 28.00 1½ 47.00 63.60 82.50 93.50 7.08 39.002 81.30 110.10 142.80 162.00 6.89 67.502½ 144.60 196.00 254.00 288.00 7.84 120.003 235.00 318.00 412.60 467.00 8.85 195.00 NOTES1.PPH = Pounds Per Hour2.The velocity is expressed for a line size equal to the inlet bore of the flowmeter.3.The apparent GPM is provided since many applications have a flow rate indicatorwhich can be used to set a safe flow rate during the steam cleaning cycle.-9--10-4.3 Pickup Coil TestingTesting the MAG and MCP (RF) coils consists of measuring theresistance with an ohmmeter. Resistance measurements are to be madeonly when there is no flow through the meter.1. Measure the resistance between pin A and pin B. The resistanceshould be approximately as listed in the following table of somecommon coils.2. The resistance from any pin to the case should be greater than 1Mohm.COIL *DC RESISTANCE (Ohms) MC2PAHT15.0 ±10% MCP3A11.5 ±10% PC13-74G1800 ±10% PC13-74S1850 ±15% PC24-45G1350 ±10% PC24-45S1850 ±15% PC28-13G120 ±20% PC28-14G 180 ±20%If either resistance measurement fails, replace the pickup coil. Firmlyseat the new coil in the flowmeter and tighten the locking nut.*For specific coils not listed contact the HFC Customer Service Department for theapproximate resistance readings.4.4 TroubleShootingRefer to the following troubleshooting guide for assistance with possible meter malfunctions:TROUBLE CAUSE REMEDY Fluid will not flow ▪Meter clogged. Clean meter.through the meter ▪Line to meterblocked.Clean line to meter.Reduced flow through the meter ▪Meter partiallyclogged.Clean meter.▪Line to meterpartially blocked.Clean line to meter.Meter readings inaccurate ▪Fluid flowrate isnot within meterflow range.See “Specifications” formin and max flowrates.▪Meter drag due toimproperinstallationReplace internals.-11-DRAWINGTypical Assembly Sanitary Flowmeter with Installation Kit-12-WARRANTY/DISCLAIMEROMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a period of 13 months from date of purchase. OMEGA’s WARRANTY adds an additional one (1) month grace period to the normal one (1) year product warranty to cover handling and shipping time. T his ensures that OMEGA’s customers receive maximum coverage on each product.If the unit malfunctions, it must be returned to the factory for evaluation. OMEGA’s Customer Service Department will issue an Authorized Return (AR) number immediately upon phone or written request. Upon examination by OMEGA, if the unit is found to be defective, it will be repaired or replaced at no charge. OMEGA’s WARRANT Y does not apply to defects resulting from any action of the purchaser, including but not limited to mishandling, improper interfacing, operation outside of design limits, improper repair, or unauthorized modification. This WARRANTY is VOID if the unit shows evidence of having been tampered with or shows evidence of having been damaged as a result of excessive corrosion; or current, heat, moisture or vibration; improper specification; misapplication; misuse or other operating conditions outside of OMEGA’s control. Components in which wear is not warranted, include but are not limited to contact points, fuses, and triacs.OMEGA is pleased to offer suggestions on the use of its various products. However, OMEGA neither assumes responsibility for any omissions or errors nor assumes liability for any damages that result from the use of its products in accordance with information provided by OMEGA, either verbal or written. OMEGA warrants only that the parts manufactured by the company will be as specified and free of defects. OMEGA MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF ANY KIND W HATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT OF TITLE, AND ALL IMPLIED W ARRANTIES INCLUDING ANY W ARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. LIMITATION OF LIABILITY: The remedies of purchaser set forth herein are exclusive, and the total liability of OMEGA with respect to this order, whether based on contract, warranty, negligence, indemnification, strict liability or otherwise, shall not exceed the purchase price of the component upon which liability is based. In no event shall OMEGA be liable for consequential, incidental or special damages.CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1) as a “Basic Component” under 10 CFR 21 (NRC), used in or with any nuclear installation or activity; or (2) in medical applications or used on humans. Should any Product(s) be used in or with any nuclear installation or activity, medical application, used on humans, or misused in any way, OMEGA assumes no responsibility as set forth in our basic WARRANTY / DISCLAIMER language, and, additionally, purchaser will indemnify OMEGA and hold OMEGA harmless from any liability or damage whatsoever arising out of the use of the Product(s) in such a manner.RETURN REQUESTS/INQUIRIESDirect all warranty and repair requests/inquiries to the OMEGA Customer Service Department. BEFORE RET URNING ANY PRODUCT (S) T O OMEGA, PURCHASER MUST OBT AIN AN AUT HORIZED RET URN (AR) NUMBER FROM OMEGA’S CUST OMER SERVICE DEPART MENT (IN ORDER T O AVOID PROCESSING DELAYS). T he assigned AR number should then be marked on the outside of the return package and on any correspondence.The purchaser is responsible for shipping charges, freight, insurance and proper packaging to prevent breakage in transit.OMEGA’s policy is to make running changes, not model changes, whenever an improvement is possible. This affords our customers the latest in technology and engineering.OMEGA is a registered trademark of OMEGA ENGINEERING, INC.© Copyright 2016 OMEGA ENGINEERING, INC. All rights reserved. This document may not be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form, in whole or in part, without the prior written consent of OMEGA ENGINEERING, INC.FOR WARRANTY RETURNS, please have the following information available BEFORE contacting OMEGA:1. Purchase Order number under which the product was PURCHASED,2. M odel and serial number of the product under warranty, and3. R epair instructions and/or specific problems relative to the product.FOR NON-WARRANTY REPAIRS, consult OMEGA for current repair charges. Have the following information available BEFORE contacting OMEGA:1. P urchase Order number to cover the COST of the repair,2. Model and serial number of the product, and 3. Repair instructions and/or specific problemsrelative to the product.Where Do I Find Everything I Need for Process Measurement and Control?OMEGA…Of Course!Shop online at SMTEMPERATUREM U Thermocouple, RTD & Thermistor Probes, Connectors, Panels & AssembliesM U Wire: Thermocouple, RTD & ThermistorM U Calibrators & Ice Point ReferencesM U Recorders, Controllers & Process MonitorsM U Infrared PyrometersPRESSURE, STRAIN AND FORCEM U Transducers & Strain GagesM U Load Cells & Pressure GagesM U Displacement TransducersM U Instrumentation & AccessoriesFLOW/LEVELM U Rotameters, Gas Mass Flowmeters & Flow ComputersM U Air Velocity IndicatorsM U Turbine/Paddlewheel SystemsM U Totalizers & Batch ControllerspH/CONDUCTIVITYM U pH Electrodes, Testers & AccessoriesM U Benchtop/Laboratory MetersM U Controllers, Calibrators, Simulators & PumpsM U Industrial pH & Conductivity EquipmentDATA ACQUISITIONM U Communications-Based Acquisition SystemsM U Data Logging SystemsM U Wireless Sensors, Transmitters, & ReceiversM U Signal ConditionersM U Data Acquisition SoftwareHEATERSM U Heating CableM U Cartridge & Strip HeatersM U Immersion & Band HeatersM U Flexible HeatersM U Laboratory HeatersENVIRONMENTALMONITORING AND CONTROLM U Metering & Control InstrumentationM U RefractometersM U Pumps & TubingM U Air, Soil & Water MonitorsM U Industrial Water & Wastewater TreatmentM U pH, Conductivity & Dissolved Oxygen InstrumentsM2124/0617。

【欧米茄历史简介】欧米茄简介欧米茄，瑞士品牌，Swatch集团旗下品牌之一。

英文名omega，代表符号“Ω”，由路易士·勃兰特始创于1848 年，欧米茄标志着制表历史上的光辉成就，傲视同侪。

其在全球130个国家，透过优秀的经销商所出售的手表，每一块均是现代年青人“梦魅以求”的腕上时针，代表了他们对“欧米茄世界”的认同和追求。

下面是分享的欧米茄。

供大家参考！欧米茄简介欧米茄，瑞士品牌，Swatch集团旗下品牌之一。

英文名omega，代表符号“Ω”，由路易士·勃兰特始创于1848 年，欧米茄标志着制表历史上的光辉成就，傲视同侪。

其在全球130个国家，透过优秀的经销商所出售的手表，每一块均是现代年青人“梦魅以求”的腕上时针，代表了他们对“欧米茄世界”的认同和追求。

欧米茄最智慧之处在于，没有任由工业化泛滥到制表的每个环节，而是将手表的最后一道工序保留手工完成，这使得它仍可以底气十足地标榜自己拒绝批量生产，秉承手工制作的瑞士制表传统。

2011年7月，欧米茄公司在淘宝网上，以898元的低价购得价值数万元的欧米茄表后，发现是假货。

为此，欧米茄公司把淘宝网告上法院。

7月20日，二中院开庭审理了此案。

1848年，瑞士联邦诞生，路易·勃兰特(Louis Brandt)与拉夏德芬(La Chau__de-Fonds)开始手表装嵌工作。

1880年，路易·勃兰特的儿子Louis-Paul及Csar将厂房搬迁至人力充足、资源丰富且交通方便的比尔(Bienne)地区。

此后，采用机械化生产，统一规格零件，并引进新式分工系统进行装配工作，装制出精密准确、品质优良且价格合理的表款。

举世闻名欧米茄19令机芯于1894年面世后，不仅成为其卓越的标志，公司也因此命名为“欧米茄”。

自此时起，欧米茄以其先进制表技术，成为制表业的先锋达一百五十年之久。

1848年，瑞士名表欧米茄诞生在一个23岁的年轻人手中。

USA:One Omega Drive, P.O. Box 4047ISO 9001 Certified Stamford, CT 06907-0047TEL: (203) 359-1660FAX: (203) 359-7700e-mail:**************Canada:976 BergarLaval (Quebec) H7L 5A1TEL: (514) 856-6928FAX: (514) 856-6886e-mail:*************For immediate technical or application assistance:USA and Canada:Sales Service: 1-800-826-6342 / 1-800-TC-OMEGACustomer Service: 1-800-622-2378 / 1-800-622-BESTEngineering Service: 1-800-872-9436 / 1-800-USA-WHENTELEX: 996404 EASYLINK: 62968934 CABLE: OMEGAMexico TEL: (001)800-TC-OMEGA FAX: (001) 203-359-7807En Espa–ol: (001) 203-359-7803e-mail:**************.mxServicing Europe:Benelux:Postbus 8034, 1180 LA Amstelveen, The NetherlandsTEL: +31 (0)20 6418405FAX: +31 (0)20 6434643Toll Free in Benelux: 0800 0993344e-mail:************Czech Republic:RudŽ arm‡dy 1868, 733 01 Karvin‡ 8TEL: +420 (0)69 6311899FAX: +420 (0)69 6311114e-mail:***************France:9, rue Denis Papin, 78190 TrappesTEL: +33 (0)130 621 400FAX: +33 (0)130 699 120Toll Free in France: 0800406342e-mail:****************Germany/Austria:Daimlerstrasse 26, D-75392 Deckenpfronn, GermanyTEL: +49 (0)7056 9398-0FAX: +49 (0)7056 9398-29Toll Free in Germany: 0800 TC-OMEGAe-mail:*****************United Kingdom:One Omega DriveISO 9002 Certified River Bend Technology CentreNorthbank, IrlamManchester M44 5EX United KingdomTEL: +44 (0)161 777 6611FAX: +44 (0)161 777 6622Toll Free in the UK: 0800 488 488e-mail:**************.ukIt is the policy of OMEGA to comply with all worldwide safety and EMC/EMI regulations that apply. OMEGA is constantly pursuing certification of its products to the European New Approach Directives. OMEGA will add the CE mark to every appropriate device upon certification.The information contained in this document is believed to be correct but OMEGA Engineering, Inc. accepts no liability for any errors it contains, and reserves the right to alter specifications without notice.These products are not designed for use in, and should not be used for, patient connected applications.1.General Information and Features22.Applicable Standards33.Installation and Removal44.Input and Output Connections85.Specifications95.1PS Type Labeling5.2Size & Weight5.3Mounting5.4Temperature Ranges5.5Input Range5.6Input Current Surge Protection5.7Output V oltage5.8Output Current5.9Output Ripple5.10Temperature Derating5.11Power-on Indicator5.12Short-circuit and overload protection5.13Wire Connections6.Derating Graph127.Block Diagram128.Dimensions Drawing139.Safety Considerations14The compact DRN power supplies are designed to supply well-regulated 21.5volt DC power to sensors, signal conditioners, data acquisition systems and high level logic equipment.Significant DRN features include:¥4kV tested isolation, primary to output ¥VDE-style patented shrouded double-bobbin design ¥PET polyester bobbins, UL 94VO flammability rating ¥Glass-filled polycarbonate case, UL 94VO ¥Recessed live parts and connector screws ¥Either 32mm or 35mm DIN rail mounting ¥Jumper-select 230V/50Hz or 115V/60Hz input ¥Wide input voltage tolerances ¥6kA protective varistor input shunt ¥Input AC spike rejection with LC filters ¥LED power-on lamp ¥Output derating only above 50 degrees C ¥Overtemperature protection ¥Short circuit protection without fuses ¥Low-ripple, well-regulated linear designFeatures2.1 Input Voltage TolerancesExceeds IEC 38 range2.2 Input / Output Isolation4KV rms 60Hz 1 minute test630V conductor spacing, IEC 348Exceeds VDE551 / IEC 742 separation spacing Exceeds VDE106 protective separation Exceeds VDE 160 clearance distances Exceeds VDE160 creepage distances2.3 Protective ClassesIEC 529:IPÐ20VDE 106 Part 1:Class II2.4 Flammability Ratings Transformer:UL 94VOCase:UL 94VOThe DRN power supplies are heavyenough to cause damage and or injuryif dropped during installation. Assurefirm rail mounting before releasing gripon the unit.If a rail assembly is to be transported,then disconnection, dismounting andseparate packing of the power supply isrecommended.For units that must be shipped installedon the rail, additional bracing to resisttransportation shocks is recommended.Do not attempt to install or connect to the power supply when the mains are energized.Warning!To change voltage jumpers:1.Remove cover from case by carefully prying up two side tabs using a screwdriver. Remove two screws from bottom of case. Slide unit out of case.2.Locate the main board assembly and position it in front of you the same way as shown in Figure3.1 on the following page.3.On the main board, locate the transformer jumpers W1, W2, and W3near the transformer T1.If your power requirement is 115Vac,jumpers W1 and W2 should beinstalled. (Do not install W3.)If your power requirement is 230Vac,jumper W3 should be installed. (Do not install W1 or W2.)Warning!Figure 3.1 Ñ Main Board Power Jumpers115VAC JUMPER WIRINGW1W3W2230VAC JUMPER WIRING W2W3W1Figure 3.2 Ñ 35mm "Top Hat"Installation:Hook in the module with the mounting rail guide on the top edge of the mounting rail and lower it to lock it into position.Removal:Release the spring catch with a screwdriver whileraising the module to disengage it.installationremovalFigure 4.1 Ñ Front Panel Connection Labels shown without regulator cover5.1PS Type LabelingDRNÐPSÐ750, where 750 equals mA rating.DRNÐPSÐ7505.2Size & WeightHeight: 2.76"(70mm)Width: 2.95"(75mm)Depth: 5.95"(151mm)Weight: 2.0 lbs.(0.9 kg)5.3Mounting35mm "top hat" DIN EN 500225.4Temperature RangesOperating Temperature Ranges-20 to 60 degrees C Storage Temperature Ranges-40 to 95 degrees C5.5Input Range115 or 230V, 49Ð61HzDRNÐPSÐ750±10%5.6Input Current Surge Protection6kA/275V Varistor5.7Output Voltage21.5V ±2% - IR, where I = output current amperes and R = 0.3½5.8Output CurrentDRNÐPSÐ7500Ð750mA5.9Output RippleLess than 10mV pp5.10Temperature DeratingNone below 50 degrees CDRNÐPSÐ750,15mA per degree C above 50¡C5.11Power-on IndicatorFront Panel red LED lamp5.12Short-circuit and overload protectionDRNÐPSÐ750foldback current limiting with automatic hightemperature shutdownno fuses required5.13Wire ConnectionsScrew down wire clamps, AWG 12 to 26 (ferrules recommended for stranded wire).Figure 6.1 Ñ Derating GraphFigure 7.1 Ñ Block Diagram75mA50DRN-PS-750¡C Ambient0100080060040020060453525155-5I max.Figure 8.1 Ñ DimensionsSPACED AS SHOWN.POWER SUPPLY WITH[151.1]5.95 2.762.953.15TWO SCREWS FASTEN RAIL UNDER MAX[70.0][75.0][80.0]Unpacking &InspectionUnpack the instrument and inspect for obvious shipping damage. Do not attempt to operatethe unit if damage is found.This instrument is a panel mount device protected in accordance with Class I of EN 61010(115/230 AC power connections). Installation of this instrument should be done by Qualified personnel. In order to ensure safe operation, the following instructions should be followed.This instrument has no power-on switch. An external switch or circuit-breaker shall be included in the building installation as a disconnecting device. It shall be marked to indicate this function, and it shall be in close proximity to the equipment within easy reach of the operator. The switch or circuit-breaker shall not interrupt the Protective Conductor (Earth wire), and it shall meet the relevant requirements of IEC 947Ð1 and IEC 947-3 (International Electrotechnical Commission). The switch shall not be incorporated in the mains supply cord.Furthermore, to provide protection against excessive energy being drawn from the mains supply in case of a fault in the equipment, an overcurrent protection device shall be installed.¥The Protective Conductor must be connected for safety reasons. Check that the power cable has the proper Earth wire, and it is properly connected. It is not safe to operate this unit without the Protective Conductor Terminal connected.¥Do not exceed voltage rating on the label located on the top of the instrument housing.¥Always disconnect power before changing signal and power connections.¥Do not use this instrument on a work bench without its case for safety reasons.¥Do not operate this instrument in flammable or explosive atmospheres.¥Do not expose this instrument to rain or moisture.EMC Considerations¥Whenever EMC is an issue, always use shielded cables.¥Never run signal and power wires in the same conduit.¥Use signal wire connections with twisted-pair cables.¥Install Ferrite Bead(s) on signal wires close to the instrument if EMC problems persist.This device is marked with the international Caution symbol. It is important to read this manual before installing or commissioning this device as it contains important informationrelating to Safety and EMC(Electromagnetic Compatibility).NoteNoteDirect all warranty and repair requests/inquiries to the OMEGA Customer Service Department. BEFORE RETURNING ANY PRODUCT(S) TO OMEGA, PURCHASER MUST OBTAIN AN AUTHORIZED RETURN (AR) NUMBER FROM OMEGAÕS CUSTOMER SERVICE DEPARTMENT (IN ORDER TO AVOID PROCESSING DELAYS). The assigned AR number should then be marked on the outside of the return package and on any correspondence.The purchaser is responsible for shipping charges, freight, insurance and proper packaging to prevent breakage in transit.FOR WARRANTY RETURNS, please have the following information available BEFORE contacting OMEGA:1.P.O. number under which the product was PURCHASED,2.Model and serial number of the product under warranty, and3.Repair instructions and/or specific problems relative to the product.FOR NON-WARRANTY REPAIRS,consult OMEGA for current repair charges. Have the following information available BEFORE contacting OMEGA:1. P.O. number to cover the COSTof the repair,2.Model and serial number of product, and3.Repair instructions and/or specific problems relative to the product.OMEGAÕs policy is to make running changes, not model changes, whenever an improvement is possible. This affords our customers the latest in technology and engineering.OMEGA is a registered trademark of OMEGA ENGINEERING, INC.© Copyright 1999 OMEGA ENGINEERING, INC. All rights reserved. This document may not be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form, in whole or in part, without prior written consent of OMEGA ENGINEERING, INC.PATENT NOTICE:This product is covered by one or more of the following patents: U.S. Pat. No. Des. 336,895;5,274,577 / Canada 2052599; 2052600 / Italy 1249456; 1250938 / France Brevet No. 91 12756 / Spain 2039150;Where Do I Find Everything I Need for Process Measurement and Control?OMEGAÉOf Course!TEMPERATUREⅪߜThermocouple, RTD & Thermistor Probes,Connectors, Panels & AssembliesⅪߜWire: Thermocouple, RTD & ThermistorⅪߜCalibrators & Ice Point ReferencesⅪߜRecorders, Controllers & Process MonitorsⅪߜInfrared PyrometersPRESSURE, STRAIN AND FORCEⅪߜTransducers & Strain GaugesⅪߜLoad Cells & Pressure GaugesⅪߜDisplacement TransducersⅪߜInstrumentation & AccessoriesFLOW/LEVELⅪߜRotameters, Gas Mass Flowmeters & Flow ComputersⅪߜAir Velocity IndicatorsⅪߜTurbine/Paddlewheel SystemsⅪߜTotalizers & Batch ControllerspH/CONDUCTIVITYⅪߜpH Electrodes, Testers & AccessoriesⅪߜBenchtop/Laboratory MetersⅪߜControllers, Calibrators, Simulators & PumpsⅪߜIndustrial pH & Conductivity EquipmentDATA ACQUISITIONⅪߜData Acquisition & Engineering SoftwareⅪߜCommunications-Based Acquisition SystemsⅪߜPlug-in Cards for Apple, IBM & CompatiblesⅪߜDatalogging SystemsⅪߜRecorders, Printers & PlottersHEATERSⅪߜHeating CableⅪߜCartridge & Strip HeatersⅪߜImmersion & Band HeatersⅪߜFlexible HeatersⅪߜLaboratory HeatersENVIRONMENTALMONITORING AND CONTROLⅪߜMetering & Control InstrumentationⅪߜRefractometersⅪߜPumps & TubingⅪߜAir, Soil & Water MonitorsⅪߜIndustrial Water & Wastewater TreatmentⅪߜ。

【手表名称】OMEGA欧米茄手表男表2513.30.00【手表简介】OMEGA欧米茄手表男表2513.30.00【上市日期】2010年4月15日【手表品牌】欧米茄男表【手表型号】2513.30.00 【市场价格】￥38,000.00详细说明2513.30.00 OMEGA欧米茄美洲杯帆船赛限量男表2513.30.00·机芯类型：自动机械表·表带类型：钢OMEGA 第32届美洲杯帆船赛纪念版机械男表2513.30生産国瑞士性别男装尺寸直径42ｍｍ×厚16ｍｍ表壳素材永不生锈精钢表带素材永不生锈精钢镜面素材永不磨损蓝宝石水晶镜面表盘盤色白色机芯 Omega 3602自动上链计时机芯，配备帆船赛倒数计时装置。

备有时、分、小秒针、中央计时指针、12小时及30分钟累计器，启動/停止按钮，归零按钮。

获瑞士天文台官方认证，镀铑表面。

动力储存：44 小时腕周最大20ｃｍ重量 190ｇ針数 3針防水性 150米防水付属品原装表盒、说明书、国際保修卡专柜售价38000、三眼小针【手表名称】欧米茄表星座机械表OMEGA天文台男表【手表简介】1102.10.00欧米茄表星座系列自动机械表OMEGA男表天文台表18K金表【上市日期】2010年4月15日【手表品牌】欧米茄男表【手表型号】1102.10.00 【市场价格】￥103,400.00详细说明欧米茄表星座系列自动机械手表产品名称：欧米茄星座系列天文台表18K黄金表壳与18K黃金表链款所属品牌：欧米茄Omega型号：1102.10.00表壳：18K黄金表壳表带：18K黃金表链功能：计时日历机芯：Omega 1120自动上链天文台机芯口径：35.5 mm介绍：机芯：Omega 1120 自动上链天文台机芯，镀铹表面。

动力储存：44 小时水晶表面圆弧形抗磨损蓝宝石水晶镜面，內部经防反光处理表壳及表盘18k黄金表壳香槟色表盘防水功能防水深度：50 米(167 英尺)厚度10.3mm欧米茄表星座系列。