576782Portable Crimp Tools, Premium Crimp Tooling, Not Releasable, Not Adjustable,Fixed In Tool, TE Product Specification (114-) / MIL Spec08/31/2020 04:08PM | Page 1 For support call+1 800 522 6752Application Tooling>Portable Crimp ToolsCertification:Cannot be CertifiedSpecification Type:MIL Spec, TE Product Specification (114-)Die Sets Type:Fixed In ToolRatchet Configuration:Not Releasable, Not AdjustableTool Grade:Premium Crimp ToolingFeaturesOtherCrimp Form-Wire Barrel Type Closed Barrel - Confined CrescentTool Grade Premium Crimp ToolingRatchet Configuration Not Releasable, Not AdjustableDie Sets Type Fixed In ToolSpecification Type MIL Spec, TE Product Specification (114-)Certification Cannot be CertifiedPower Type Battery, ManualTool Type Heavy Head Hand ToolProduct ComplianceFor compliance documentation, visit the product page on >EU RoHS Directive 2011/65/EU Out of ScopeEU ELV Directive 2000/53/EC Out of ScopeChina RoHS 2 Directive MIIT Order No 32, 2016Not reviewed for China RoHS complianceEU REACH Regulation (EC) No. 1907/2006Current ECHA Candidate List: JUN 2020(209)Candidate List Declared Against: JUN 2016(169)Does not contain REACH SVHCHalogen Content Not Yet Reviewed for halogen content576782 ACTIVEAMPTE Internal #:576782Portable Crimp Tools, Premium Crimp Tooling, Not Releasable,Not Adjustable, Fixed In Tool, TE Product Specification (114-) / MILSpecView on >08/31/2020 04:08PM | Page 2For support call+1 800 522 6752Halogen Content Not Yet Reviewed for halogen content Solder Process CapabilityNot applicable for solder process capabilityProduct Compliance DisclaimerThis information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change. The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked.Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulations, TE’s information on SVHC in articles for this part number is still based on the European Chemical Agency (ECHA) ‘Guidance on requirements for substances in articles’(Version: 2, April 2011), applying the 0.1% weight on weight concentration threshold at the finished product level. TE is aware of the European Court of Justice ruling of September 10th, 2015 also known as O5A (Once An Article Always An Article) stating that, in case of ‘complex object’, the threshold for a SVHC must be applied to both the product as a whole and simultaneously to each of the articles forming part of its composition. TE has evaluated this ruling based on the new ECHA “Guidance on requirements for substances in articles” (June 2017, version 4.0) and will be updating its statements accordingly.TE Model / Part #1577966-1TERMINAL, PEEK PIDG STRATO, 14-12 AWGTE Model / Part #1577637-1TERMINAL RT PIDG PEEK STRATO 14-12 AWGTE Model / Part #1577640-1TERMINAL RT PIDG PEEK STRATO 14-12 AWGTE Model / Part #15287214-12 PIDG NYLON RT NO 10WHITETE Model / Part #15287414-12 PIDG R/T NO6STUD WHITETE Model / Part #50839-1PIDG PTFE STRATO RING 14 6TE Model / Part #15287314-12 PIDG NYLON RT NO 8 WHITETE Model / Part #1577638-1TERMINAL RT PIDG PEEK STRATO 14-12 AWGTE Model / Part #1577639-1TERMINAL RT PIDG PEEK STRATO 14-12 AWGTE Model / Part #1577641-1TERMINAL, PEEK PIDG STRATO, 14-12AWGTE Model / Part #15287114-12 PIDG R/T 1/4 STUD WHITETE Model / Part #1577965-1TERMINAL, PEEK PIDG STRATO, 14-12AWGCompatible Parts08/31/2020 04:08PM | Page 3For support call+1 800 522 6752TE Model / Part #ZPF000000000121739182-0862-22TE Model / Part #A13580-000HTCM-SCE-TP-1/4-4H-4TE Model / Part #DTS20F15-19PN RECP ASSYTE Model / Part #576783HEAVY HD HT, STRATO #12TE Model / Part #724659-1EXT TOOL FOR POSITIVE .187TE Model / Part #576781HEAVY HD HT, STRATO #16TE Model / Part #1577619-1TERMINAL RT PIDG PEEK STRATO 24-22 AWGTE Model / Part #1577623-1TERMINAL, PEEK PIDG STRATO, 20AWGTE Model / Part #1577622-1TERMINAL, PEEK PIDG STRATO, 20AWGTE Model / Part #576780HEAVY HDD HT, STRATO #18TE Model / Part #50841TERMINAL,PIDG PTFE R 14 1/4TE Model / Part #1577643-1TERMINAL, PEEK PIDG STRATO, 14-12AWGTE Model / Part #1577642-1TERMINAL RT PIDG PEEK STRATO 14-12 AWGTE Model / Part #15287614-12 PIDG R/T NYLON NO 4WHITETE Model / Part #152869TERMINAL RING TONGUE PIDG 14-12 3/8 STUDCustomers Also BoughtDocumentsDatasheets & Catalog PagesDatasheets & Catalog PagesCERTI-CRIMPII-Premium-August-1-1773864-7EnglishCrimp Term Whitepaper-Use the Right Tool 1-1773953-1EnglishCRIMPING WHERE FORM MEETS FUNCTIONEnglishBottoming DiesEnglishInstruction SheetsInstruction Sheet (U.S.)EnglishInstruction Sheet (U.S.)English08/31/2020 04:08PM | Page 4 For support call+1 800 522 6752。
Technical Data Sheet Product 243Worldwide Version, October 1995NOT FOR PRODUCT SPECIFICATIONS.THE TECHNICAL DATA CONTAINED HEREIN ARE INTENDED AS REFERENCE ONLY.PLEASE CONTACT LOCTITE CORPORATION QUALITY DEPARTMENT FOR ASSISTANCE AND RECOMMENDATIONS ON SPECIFICATIONS FOR THIS PRODUCT.ROCKY HILL, CT FAX: +1 (860)-571-5473 DUBLIN, IRELAND FAX: +353-(1)-451 - 9959PRODUCT DESCRIPTIONLOCTITE ® Product 243 is a single component anaerobic threadlocking material, which is thixotropic and develops medium strength. The product cures when confined in theabsence of air between close fitting metal surfaces and is particularly suitable for less active substrates such as stainless steel and plated surfaces.TYPICAL APPLICATIONSPrevents loosening and leakage of threaded fasteners.Particularly suitable for applications such as pump or motor mounting bolts, engine rocker nuts or equipment housing screws, where disassembly with hand tools is required for servicing.PROPERTIES OF UNCURED MATERIALTypicalValueRangeChemical Type Dimethacrylate EsterAppearanceOpaque Blue Fluorescent LiquidSpecific Gravity @ 25°C1.08Viscosity @ 25°C, mPa.s (cP) Brookfield RVT***************12,0006,000 to 18,000 @ 20 rpm2,2501,500 to 3,000 DIN 54453, MVD = 129 s -1 after t=180secs 350250 to 500Flash Point (TCC), °C>93TYPICAL CURING PERFORMANCECure speed vs. substrateThe rate of cure will depend on substrate used. The graph below shows the breakaway strength developed with time on M10 steel nuts and bolts compared to different materials and tested according to IS0 10964.S te elZ i nc Di c hr om at eS t ai n l es s S t ee lB r a s s5min 10min30min 1hr3hr6hr24hr72hrCure Time, Hours255075100% o f F u l l S t r e n g t h o n S t e e lCure speed vs. bond gapThe rate of cure will depend on the bondline gap. Gaps in threaded fasteners depend on thread type, quality and size.The following graph shows shear strength developed with time on steel pins and collars at different controlled gaps and tested according to ISO 10123.5min 10min 30min 1hr3hr 6hr 24hr 72hrCure Time, Hours255075100% o f F u l l S t r e n g t h o n S t e e l0.15m m0.05m m0.25m mCure speed vs. temperatureThe rate of cure will depend on the ambient temperature.Graph below shows the breakaway strength developed with time at different temperatures on M10 steel nuts and bolts and tested according to IS0 10964.5min 10min 30min 1hr3hr 6hr 24hr 72hrCure Time, Hours255075100% o f F u l l S t r e n g t h o n S t e e l22°C40°C5 °CCure speed vs. activatorWhere cure speed is unacceptably long, or large gaps are present, applying activator to the surface will improve cure speed. The graph below shows breakaway strength developed with time using ACTIVATOR N and T on M10 Zinc Dichromate steel nuts & bolts and tested according to IS010964.5min 10min30min 1hr3hr6hr24hr72hrCure Time, Hours255075100% o f F u l l S t r e n g t h o n S t e e lAct. TN oA c t i v a t o r A c t NTYPICAL PROPERTIES OF CURED MATERIAL Physical PropertiesCoefficient of thermal expansion, ASTM D696, K -180 x10-6Coefficient of thermal conductivity, ASTM C177, W.m -1 K -10.1Specific Heat , kJ.kg -1 K -10.3Loctite UK Limited, Watchmead,Welwyn Garden City, Herts, AL7 1JB Technical Services Tel: (01707) 358888Customer Services Tel: (01707) 358844TDS 243 October 1995Loctite is a Registered Trademark of Loctite Corporation, Hartford, CT 06106PERFORMANCE OF CURED MATERIAL(After 24 hr at 22°C on M10 steel nuts & bolts)TypicalValue Range Breakaway Torque, IS0 10964 (4.3), N.m 2015 to 25 (lb.in)(180)(130 to 220)Prevail Torque, IS0 10964 (4.5) , N.m 7 4 to 10 (lb.in)(62)(35 to 88)Breakloose Torque, DIN 54454, N.m 2414 to 34 (lb.in)(210)(120 to 300)Max. Prevail Torque, DIN 54454, N.m 2414 to 34 (lb.in)(210)(120 to 300)TYPICAL ENVIRONMENTAL RESISTANCE Test Procedure :Breakloose Torque, DIN 54454Substrate:M10 Zinc Phosphate Nuts&Bolts Cure procedure: 1 week at 22°C Hot StrengthTested at temperature.050100150255075100% R T S t r e n g t hTemperature, °CHeat AgeingAged at temperature indicated and tested at 22°C.01,0002,0003,0004,0005,0000255075100125Hours% I n i t i a l S t r e n g t h , a t R T120°C150°C100°C Chemical / Solvent ResistanceAged under conditions indicated and tested at 22°C.SolventTemp.% Initial Strength retained at100 hr 500 hr 1000 hr 5000 hr Motor Oil125°C 95959595Leaded Petrol 22°C 1001009595Brake Fluid22°C 100100100100Water/Glycol (50%/50%)87°C 95808080Ethanol 22°C 100858585Acetone22°C1001008585GENERAL INFORMATIONThis product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidising materials.For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).Where aqueous washing systems are used to clean the surfaces before bonding, it is important to check for compatibility of the washing solution with the adhesive. In some cases these aqueous washes can affect the cure and performance of the adhesive.This product is not normally recommended for use on plastics (particularly thermoplastic materials where stress cracking of the plastic could result). Users are recommended to confirm compatibility of the product with such substrates.Directions for useFor best performance surfaces should be clean and free of grease. Product should be applied to the bolt in sufficient quantity to fill all engaged threads. This product performs best in thin bond gaps, (0.05mm). Very large thread sizes may create large gaps which will affect cure speed and strength.This product is designed to give controlled friction,(torque/tension ratio), during assembly. In critical tightening applications this ratio should be confirmed.StorageProduct shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8°C to 28°C (46°F to 82°F) unless otherwise labelled. Optimal storage is at the lower half of this temperature range. To prevent contamination of unused product, do not return any material to its original container. For further specific shelf life information,contact your local Technical Service Centre.Data RangesThe data contained herein may be reported as a typical value and/or range (based on the mean value ±2 standard deviations). Values are based on actual test data and are verified on a periodic basis.NoteThe data contained herein are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the user's responsibility to determine suitability for the user's purpose of any production methods mentioned herein and to adopt such precautions as may be advisable for the protection of property and of persons against any hazards that may be involved in the handling and use thereof. In light of the foregoing, Loctite Corporation specifically disclaims all warranties expressed or implied,including warranties of merchantability or fitness for a particular purpose, arising from sale or use of Loctite Corporation’s products. Loctite Corporation specifically disclaims any liability for consequential or incidental damages of any kind, including lost profits. The discussion herein of various processes or compositions is not to be interpreted as representation that they are free from domination of patents owned by others or as a licence under any Loctite Corporation patents that may cover such processes or compositions. We recommend that each prospective user test his proposed application before repetitive use, using this data as a guide.This product may be covered by one or more United States or foreign patents or patent applications.。
Sava Indoor/Outdoor Folding Chair Item#: 62774Verso Indoor/Outdoor Folding ChairItem#: 63443SavE ThESEinSTrucTionS For FuTurE rEFErEncE.aTTach YourrEcEiPT hErEKeep a copy of your proof of purchase or order confirmation which will be needed if you need to contact us about warranty coverage.Purchase Date:Questions, problems, missing parts?Before returning to your retailer, our exceptional customer service is available.C all toll-free (866)866)985-78779 a.m. – 9 p.m., ESTE mail *************************Li ve chatwww.balkenehome .com9 a.m. - 6 p.m., EST , Monday - FridayBEFORE YOU BEGINBefore use, make sure all parts are intact. If any part is missing or damaged, do NOT attempt to assemble the product. Please read and understand this entire manual before attempting to assemble, operate or install this product. If you have any questions regarding the product, please contact Customer Service. GENERAL INFORMATIONYour new bench is made from the finest materials available. It should provide many years of enjoyment with minimal care. This bench is intended for outdoor use but as with all wood products, it will age faster with exposure to the weather and sun.For best results, keep your bench clean and dry. Clean with a soft, damp cloth. If you use furniture covers, always make sure the bench is clean and completely dry before covering, as mold may form in dark, wet places. Between uses and when seasonally out of use, store this bench in a dry, temperature controlled place to prolong its useful lifespan. Check the hinges on your bench regularly to make sure they are secure. To avoid damaging the bench, do not drag when moving.The weight limit for this bench is 300 LB/135 KG.SAFETY INFORMATIONWARNINGDO NOT stand or allow children to stand on this bench. Make sure connectors are securely in place. Perform periodic checks to make sure the connectors are secure and adjust if needed.CAUTIONREAD all instructions before use. Failure to do so may result in faulty assembly and potential injury.Unfold the chair and place on a flat, firm, level surface. Do not tip or lean the chair during use. W hen not in use, the chair may be folded for compact storage.LIMITED WARRANTYCustomers in the Conti guous USWith proof of purchase from an authorized retailer , t his product is warranted for a period of 1 year from original purchase date against defects in materials and workmanship under normal use. This warranty does NOT cover normal wear/weathering, exposure to water, freezing temperatures, oils, fluids, or chemicals OR use in a commercial context if the unit is not designated as a commercial model . At Well Traveled Living ’s sole discretion, products under warranty will be repaired and/or replaced at no charge to the customer. Returns sent back to Well Traveled Living must be sent via prepaid freight in the original retail packaging.For warranty service , contact Balkene Home /Well Traveled Living at the address, phone numbers or website and email listed in this owner’s manual. Be sure to have your sales receipt, date of purchase and catalogue/model numbers available when calling. All warranty service will be coordinated by Well Traveled Living 's Amelia Island, Florida service center. This warranty is extended only to the original owner. Proof of purchase will be required before warranty service is rendered. The sales receipt is the only valid proof of purchase. This warranty only covers failures due to defects in materials or workmanship which occur during normal use. Failures and/or damage which result from accident, negligence, misuse, abuse, neglect, mishandling, alteration or modification, failure to maintain, improper assembly or maintenance, service by unauthorized agency or use of unauthorizedcomponents or damage that is attributable to acts of God are NOT covered.This limited warranty gives you specific legal rights and you may also have other rights which vary from jurisdiction to jurisdiction. The provisions of the United Nations Convention on Contracts for the Sales of Goods shall not apply to this limited warranty or the sale of products covered by this limited warranty.•THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LI STED .• PURCHASER ASSUMES ALL RISKS IN THE ASSEM BL Y AND OPERATION OF THIS UNIT .• FAILURE TO FOLLOW WARNINGS ANDOPERATIONA L INSTRUCTIONS CONTAINED IN THIS MANUA L CAN RESU L T IN SEVERE PROPERTY DAMAGE AND/OR PERSONA L INJURY .• IN NO EVENT WILL WELL TRAVELED LIVING, OR ITS DIRECTORS, OFFICERS OR AGENTS B E LI A BL E TO THE PURCHASER OR ANY THIRD PARTY, WHETHER IN CONTRACT, IN TORT, OR ON ANY OTHER B ASIS, FOR ANY INDIRECT, SPECIA L , PUNITIVE, EXEMP L ARY, CONSEQUENTIA L , OR INCIDENTA L L OSS, COST, OR DAMAGE ARISING OUT OF OR IN CONNECTION WITH THE SA L E, MAINTENANCE, USE, OR INA BILI TY TO USE THE PRODUCT, EVEN IF WE L L T RAVE L ED L IVING OR ITS DIRECTORS, OFFICERS OR AGENTS HAVE B EEN ADVISED OF THE POSSI BIL ITY OF SUCH L OSSES, COSTS OR DAMAGES, OR IF SUCH L OSSES, COSTS, OR DAMAGES ARE FORESEEA BL E. IN NO EVENT WI LL WELL TRAVELED L IVING, OR ITS OFFICERS, DIRECTORS, OR AGENTS BE L IA BL E FOR ANY DIRECT L OSSES, COSTS OR DAMAGES THAT EXCEED THE PURCHASE PRICE OF THE PRODUCT.• SOME JURISDICTIONS DO NOT ALLOW THEEXC L USION OR L IMITATION OF INCIDENTA L OR CONSEQUENTIA L DAMAGES, SO THE A B OVEL IMITATION OR EXC L USION MAY NOT APP L Y TO THE PURCHASER.Important NoticeDo NOT return to place of purchase —for customer service and warranty issues:C all toll-free E mail Li ve chat(866)985-78779 a.m. – 9 p.m., EST ************************* 9 a.m. - 6 p.m., EST , Monday - FridayDistributed by:Well Traveled Living716 S 8th Street, Amelia Island, FL 32034 *************************(866) 985-7877Fire Sense ®, Patio Sense,® Avalon Home,® M ojave Sun ®, Vulcan ®, Balkene Home ® and Well Traveled Living ® are registered trademarks of E XTEND YOUR WARRANTYWhen you purchase a Fire Sense or Balkene Home product from any authorized retailer , you 'll have peace of mind in knowing that it comes with a one-year warranty. Extend your warranty for an additional year when you review your item at balkenehome .com within 365 days of purchase .。
BellSouth Telecommunications, Inc.675 West Peachtree StreetAtlanta, Georgia 30375CarrierNotificationSN91087045Date: March 23, 2007To: Competitive Local Exchange Carriers (CLEC)Subject: CLECs – (Documentation/Guides) - Update to the Local Ordering Handbook (LOH), Version 24.0C, New Local Service Ordering Guide 6 (LSOG 6) and EDI LocalMechanization Specifications 06 (ELMS 06) for Release 24.0BellSouth Telecommunications, Inc. d/b/a AT&T Southeast (AT&T) will implement the following changes to update documentation in the LOH, Version 24.0C, ELMS 06 for Release 24.0.CCPNumberDescription Of The Change2479 DES field (DL Form/Screen): Update Conditional Usage Note 2 to read: “When TOS=2 and DES is populated, the end user state must be Louisiana or Kentucky, or the STYC must = SI or CI.”2480 SASN, CITY, STATE and ZIP fields R/C/O xDSL Loops ACT = D table. Updated R/C/O table to move CITY, STATE and ZIP fields from ‘Required’ to “Conditional,” and to move the SASN field from ‘Conditional’ to “Optional.”Please refer to the attachments for specific details of the changes listed above.These changes will be reflected in the next update of the ELMS 06, Release 24.0/LOH Version 24.0D, scheduled to be posted on Friday, April 13, 2007.A summary of all changes within this document will be listed in the Summary of Changes section. This update can be found on the BellSouth Interconnection Services Web site in the Local Exchange Ordering (LEO) Guides at:/reference_library/guides/html/leo.html#lohPlease contact your AT&T local support manager with any questions.Sincerely,ORIGINAL SIGNED BY KRISTEN E. SHOREKristen E. Shore – DirectorBellSouth Telecommunications, Inc. d/b/a AT&T SoutheastAttachmentsCCP 2479 Attachment Listed BelowLOH-24.0-ELMS06CRB: 5004CCP: 2479MAP: ELMS6Release: 24DL:DES fieldDESDesignationDL Form / ScreenLSOG6 / ELMS6DefinitionIndicates the professional designation phrase of a business listing.Definition NotesNote 1:Typically prints in the white pages and is used to identify the type of business when it is notinherently obvious from the name (e.g., Bob Smith and Daughters plmbr).Valid EntriesDesignation abbreviationsValid Entry NotesNote 1:Allowable values provided in yellow page header book (YPH). BAPCO-BellSouth®Advertising and Publishing Company.Data CharacteristicsUp to 25 alpha/numericExamplesattyConditional Usage NotesNote 1:Prohibited when the LACT field is Z.Note 2:Prohibited when the 1st character of the TOS is 2 and the State on the EU form is notKentucky or Lousiana and/or when the STYC is not SI or CI.When TOS=2 and DES is populated, the end user state must be Louisiana or Kentucky, or the STYC must = SI or CI.Business RulesRule 1:Designation will print in the white pages of the directory.Rule 2:Designation will print in lower case letters.Rule 3:Designation will not print, or affect placement in the yellow page section of the directory.Rule 4:Not allowed on Residence accounts except when the residence telephone number isindented in an arrangement with a business listing.* * * * * * * * * * End of definition for field DES * * * * * * * * * *CCP 2480 Attachment Listed BelowLOH-24.0-ELMS06CRB: 5005CCP: 2480MAP: ELMS6Release: 24xDSL R/C/O TablesxDSL LoopsProduct ListingxDSL LoopsThe xDSL Loops are capable loops providing a transmission path between a Collocation agreement and a customer premises, between two customer premises, or between two Collocation arrangements.Currently, three offerings are available for xDSL Loops:•2-Wire ADSL Capable Loop w/Network Interface Device (NID)•2-Wire HDSL Capable Loop w/NID•4-Wire HDSL Capable Loop w/NIDAsynchronous Digital Subscriber Line (ADSL) is a 2-wire Metallic Interface consisting of metallic facilities only. ADSL is a transport technology only and cannot be transported over Digital Loop Carrier (DLC) or interoffice facilities. High-Bit Rate Digital Subscriber Line (HDSL) is a transport technology that can either be 2-wire or 4-wire. The loop facility consists of only metallic facilities and cannot be transported over Digital Loop Carrier (DLC) or interoffice facilities.Ordering Forms/ScreensThe following chart illustrates the required, conditional and optional forms/screens for ordering this service. Detailed information will follow to assist you in filling out each of these forms/screens.Forms/ScreensxDSL LoopsSI LSR Hunting EU DL RS DRS PS NP LS LSNP RPL Proprietary R R R RR = Required C = Conditional O = OptionalService Inquiry Form InstructionsThe following two subsections provide instructions for the SI Process. The SI form is reproduced at the end of this section.SI Process for ADSL and HDSL Loops:Manual Service Inquiry Process1. CLEC will send manual SI (Service Inquiry) and LSR for ADSL or HDSL Loop setup to the UNE CRSG.2. UNE CRSG will forward the SI to OSPE.3. The completed SI and LSR will then be forwarded to the LCSC to process the service order to bill the CLEC for appropriate charges and provision the LSR.Electronic Loop Make UpThe Service Inquiry Form is not required when the CLEC uses the Electronic Loop Make Pre-order Function to qualify the loop. Refer to the BellSouth® Pre-Order Business Rules.If a new facility is being requested, the CLEC must obtain Loop Make-up (LMU) information (either manually or electronically), a Facility Reservation Number and populate the reservation number in the RESID field on the LSR.If the loop being ordered is a reuse of an existing facility and the CLEC has determined that the facility is compatible to the loop type being ordered, it is not necessary to obtain a RESID. Populate the RESID field with all "X's" and submit the electronic order.If Loop Modifications are required, a SI and LSR must be submitted manually, following the guidelines in theADSL/HDSL CLEC information Package.Service Inquiry FormNote:The Service Inquiry form is not included in this document. Contact your Local Support Manager (LSM)to obtain the form.Completing the DL Form/ScreenIf directory listings are required, refer to REQTYP J for more information on completing the DL form/screen.Completing the LSR and EU Forms/ScreensAccount level activities (ACT) apply to the entire account. A complete list of ACTs and their definition can be found in the Data Dictionary entry for ACT.The following chart shows all of the valid account level activities for this service.Valid Account Level ActivitiesxDSL LoopsN C D T R V S B W L YX X X X - X - - X - - “X” denotes valid account level activities. A dash (-) indicates a non-valid account level activity.The Required, Conditional and Optional (R/C/O) fields on the LSR and EU forms/screens will be given for every validACT code in the ACT Tables section.Completing the LS Form/ScreenThe Loop Service (LS) form/screen may be required or invalid depending on the account level activity. Each accountlevel activity has valid Line Level Activities (LNAs). These LNAs determine how, or if, the LS form/screen should bepopulated. A complete list of LNAs and their definition can be found in the Data Dictionary entry for LNA.The following chart gives the valid LNAs for each account level activity (ACT) and the associated LS form/screenusage for this service.If ACT is: Then LNA is: And LS form/screen is:N N RequiredC N &D for electronic orders; C for manual orders RequiredD D RequiredT N or T RequiredV N, V or D RequiredW W Required The Required, Conditional and Optional (R/C/O) fields for the Loop Service (LS) form/screen are listed according tothe Line Level Activity (LNA) in the LNA Tables Section.RCO TablesThe following tables show the Required, Conditional and Optional (R/C/O) fields on the validforms/screens for this product. All unmentioned fields are either invalid, not applicable, prohibited or not supported. When fields are populated which are not supported by BellSouth, these not supported fields will be ignored. Populating any other fields may result in a fatal reject or a clarification of the service request. Please note the following codes:- Optional fields marked with an asterisk (*) force at least one of the conditional fields to become required when populated.- Fields used only for manual orders are followed by (M).- Fields used only for electronic orders are followed by (E).- For fields marked with a DOUBLE asterisk (**) please refer to the Data Dictionary for clarification. See the Data Dictionary Section for additional information on each field.ACT= D: LSRRequiredACNA ACT ACTLAN BAN1CCCCNA D/TSENT DDDIMPCON IMPCON-TEL NO.INITINIT-FAX NO.INIT-TEL NO.NCNCI PG_OF_ (M)PONREQTYP SC SECNCITOSConditionalCUST LSO (E)NORPROJECT PROJINDR RCC (E)RPON SUP VEROptionalCIC REMARKS RORD (M)SN91087045 ACT Tables: Reqtyp A, xDSL LoopsACT= D: EURequiredAN (M)CITY NAMEPG_OF_ (M)PON (M)SASNSTATE ZIPConditionalAAI LD1LD2LD3LV1LV2LV3SANO SASDSASF SASS SATHVER (M)CITY STATEZIPOptionalLCON-NAME LCON-TEL NO.SASN*。
