NHD-0440AZ-FL-YBW, 规格书,Datasheet 资料

Flow Control ValvesDRV & DRVP Series (see page 47)Check ValvesRV & RVP Series (see page 53)Needle ValvesDV, DVE & DVP Series (see page 43)Pressure Compensated Flow Control ValvesSRVR Series (see page 51)Stainless Steel Flow Control ValvesDV, DRV & RV Series(see page 55)OverviewProduct Features• Phosphate coated steel valve body • FPM (Fluoroelastomer) seals• Slotted control spindle for precise and linear flow adjustments • Exclusive safety spindle design• Color coded spindle for accurate flow control•Guided poppets for smoother, chatter free operationAvailable Options• Panel mounting kit• 25 and 65 PSI cracking pressure springs (7 psi standard)• Zinc Plated Body. Consult HYDAC for price and deliveryIntroductionOur complete line of flow control valves are designed and manufactured by our ISO 9001 certified FLUTEC Division.Description• T he HYDAC family of flow control valves permit safe, simple and repeatable control of hydraulic fluids at operating pressures to 5000 psi.• T he standard slotted control spindle allows for a wide range of infinitely variable flow adjustments with excellent flow characteristics.• P recise adjustment of flow is achieved by a micrometer style adjustment knob featuring a color coded flow indicator for accurate, easy-to read visual flow reference.• D esign modifications and special materials are available for corrosive fluids such as phosphate ester, acids and caustics.Valve DesignHYDAC flow control valves can be adjusted easily and precisely by means of the control knob. Increasing the number of turns from the fully closed position provides a steady increase of the flow rate. The colored scale permits accurate repetition of settings and the colored triangle on the rising spindle provides a visual indication of the increasing cross section of the flow area. A set screw on the side locks the knob at the desired setting.HYDAC flow control valves include a unique safety spindle design feature. As the valve spindle is turned counter-clockwise, the spindle shoulder will engage the safety screw limiting the travel of thespindle. The hardened, high-strength steel safety screw is sealed in position to discourage tampering.Flow Control Valve Design Features and OptionsGuided PoppetA BDV, DVE, & DVP SeriesNeedle ValvesModel CodeDV - 06 - 01 .X / 5 - S - MNeedle Valve DV = Inline Mounting DVP = Manifold Mounting DVE = Cartridge ValveNominal Sizes DV & DVP SAE (DV only) NPT F (DV Only) BSPP (DV Only)Nom. Size Tube Size Thread Size Pipe Size Pipe OD Thread Size 06 = 1/8” 0.405” G1/8 08 = -4 7/16-20 UNF 1/4” 0.540” G1/4 10 = -6 9/16-18 UNF 3/8” 0.675” G3/8 12 = -8 3/4-16 UNF 1/2” 0.840” G1/2 16 = -12 1-1/16-12 UN 3/4” 1.050” G3/4 20 = -16 1-5/16-12 UN 1” 1.315” G1 25 = -20 1-5/8-12 UN 1-1/4” 1.660” G1 1/4 30 = -24 1-7/8-12 UN 1-1/2” 1.900G1 1/2DVENom Size SAE CavityBSPP Cavity 08 = 3/4-16 UNF G1/2 10 = 7/8-14 UNF G1/2 12 = 1-1/16-12 UN G3/4 16 =1-5/16-12 UNG1Housing Material 01 = Carbon Steel Modification NumberPort Configuration (omit) = DVP Only 5 = NPTF - ANSI B1.20.3 12 = SAE - SAEJ1926 Ports with ISO 725 Threads and O-Ring Sealing 0 = BSPP to DIN 3852, Part 2-X Supplementary Details S = Panel Mounting Kit (not available in sizes 20, 25, 30)Model Codes containing selections listed in RED are non-standard items – Minimum quantities will apply – Contact HYDAC for information and availabilityNot all combinations are availableSpecifications• 5000 psi operating Pressure • 8 Sizes, 1/8” - 1-1/2”• S AE O-Ring, NPT or BSPP Threaded Connections; Manifold Mounting; and Cartridge Type • Flows to 80 gpm• Carbon steel housing• FPM (Fluoroelastomer) O-Rings (standard)• Color coded spindle for accurate flow control • Provision for panel mounting • Unique safety spindle design• Temperature Range: -4˚ to 212˚F at full pressureHydraulic SymbolDV SeriesInline Mounting DVP SeriesManifold MountingDVE Series Cartridge Valve80604020100∆p(bar)Q (l/min)Size 0680604020100∆p(bar)Q (l/min)Size 12∆p(bar)Q (l/min)Size 10∆p(bar)Q (l/min)Size 20, 25, 30∆p(bar)Q (l/min)Size 08∆p(bar)Q (l/min)Size 16Q (l/min)∆p(bar)Q (l/min)Size 124030201050∆p(bar)4030201050∆p(bar)Q (l/min)Size 104030201050∆p(bar)Q (l/min)Size 16Pressure Drop curves were established by using mineral oil with kinematic viscosity 165 SUS at 112°F / 50°CPressure Drop CurvesDV, DVP, DRV, DRVP SeriesFlow Direction: A to B / Throttled FlowDVE Cartridge Flow Control ValvesFlow Direction: A to B / Throttled Flow1) Note: Pg style thread per DIN 40430Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print.Dimensions are in inches/(mm) and lbs./(kg.)*Dependent upon valve and seal materials selected.DimensionsDV Series Inline Needle ValveKnob for Sizes 20-40for wrench1) Only 4 mounting holes are used on sizes 06, 08, 10, and 122) Pg Style Thread per DIN 40430Note: Contact factory for certified drawing of cartridge valve cavity.Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print.Dimensions are in inches/(mm) and lbs./(kg.)DimensionsA BModel CodeDRV - 06 - 01 . X / 5 - 25 - S-MFlow Control Valve DRV = Inline Mounting DRVP = Manifold Mounting Nominal Sizes Nominal Size SAE (DRV only) NPT F (DRV Only) BSPP (DRV Only)(DRV + DRVP) Tube Size Thread Size Pipe Size Pipe OD Thread Size 06 = -2 5/16-24 UNF 1/8” 0.405” G1/8 08 = -4 7/16-20 UNF 1/4” 0.540” G1/4 10 = -6 9/16-18 UNF 3/8” 0.675” G3/8 12 = -8 3/4-16 UNF 1/2” 0.840” G1/2 16 = -12 1-1/16-12 UN 3/4” 1.050” G3/4 20 = -16 1-5/16-12 UN 1” 1.315” G1 25 = -20 1-5/8-12 UN 1-1/4” 1.660” G1 1/4 30 =-24 1-7/8-12 UN 1-1/2” 1.900” G1 1/2Housing Material01 = Carbon Steel Modification NumberPort Configuration(omit) = DRVP only 0 = BSPP to DIN 3852, Part 2 -X 5 = NPTF (ANSI B1.20.3) 12 = SAE - SAEJ1926 Ports with ISO 725 Threads and O-Ring Sealing Cracking Pressure(omit) = 7 PSI standard 25 = 25 PSI optional 65 = 65 PSI optionalSupplementary Details S = Panel Mounting Kit (not available in sizes 20, 25, 30)Model Codes containing selections listed in RED are non-standard items – Minimum quantities will apply – Contact HYDAC for information and availabilityNot all combinations are availableSpecifications• 5000 psi operating pressure • 8 sizes, 1/8” - 1-1/2”• N PTF or SAE O-Ring threaded connections, or manifold mounting • Flows to 80 GPM • Carbon steel housing• FPM (Fluoroelastomer) O-Rings (standard)• Color coded spindle for accurate flow control • Provision for panel mounting • Unique safety spindle design• Temperature Range: -4° to 212°F at full pressureHydraulic SymbolDRV & DRVP SeriesFlow Control ValvesDRV Series Inline MountingDRVP SeriesManifold Mounting18161420∆p (b a r )121086420Q (l/min)Size 06∆p (b a r )Q (l/min)Size 12∆p (b a r )Q (l/min)Size 10∆p (b ar )Q (l/min)Size 20, 25, 304030201050∆p (b a r )Q (l/min)Size 08∆p (b a r )Q (l/min)Size 16∆p (b a r )40302010500∆p (b a r )DRV-06-01.X to DRV-16-01.XQ (L/min)Pressure Drop curves were established by using mineral oil with kinematic viscosity 335 SUS at 86°F / 30°CFlow Direction: B to A / Free Flow Through Check ValvePressure Drop CurvesFlow Direction: A to B / Throttled Flow1) Pg style thread per DIN 40430Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print.Dimensions are in inches/(mm) and lbs./(kg.)Dimensions DRV Series1) Only 4 mounting holes are used on sizes 06, 08, 10, & 122) Pg style thread per DIN 40430Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print.Dimensions are in inches/(mm) and lbs./(kg.)Dimensions DRVP SeriesModel CodeSRVR - 08 - 01 .X / 5 - SPressure Compensated Flow Control ValveSRVR = Flow Control Valve (with internal check valve)Nominal Size NPTF OnlyPipe Size Pipe OD 08 = 1/4” 0.540” 10 = 3/8” 0.675” 12 = 1/2” 0.840” 16 =3/4” 1.050”Housing Material01 = Carbon Steel Modification NumberPort Configuration 0 =BSPP to DIN 3852, Part 2 -X 5 = NPTF (ANSI B1.20.3)Supplementary Details S = Panel Mounting KitModel Codes containing selections listed in RED are non-standard items – Minimum quantities will apply – Contact HYDAC for information and availabilityNot all combinations are availableSpecifications• 4 sizes, 1/4” - 3/4”• W orking Pressure:Inlet: 102 psi min. / 3045 psi max. Outlet: 0 psi min. / 2944 psi max.• Flows to 24 gpm • NPTF Connections • Carbon Steel Housing• FPM (Fluoroelastomer) O-Rings (standard)• Color coded spindle for accurate flow control • Provision for panel mounting • Unique safety spindle design• Temperature Range: -4˚ to 212˚F at full pressure • Viscosity Range: 13 SUS min. / 1781 SUS max.Hydraulic SymbolSRVR SeriesPressure Compensated Flow Control ValvesBAABQ(L/min)∆p (bar)015010050200201816141210864222Q(L/min)∆p (bar)015010050200807060504030201090Q(L/min)∆p (bar)015010050200504540353025201510555Q(L/min)∆p (bar)01501005020010864212Q (L/min)p(bar)1) Pg style thread per DIN 40430Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print.Dimensions are in inches/(mm) and lbs./(kg.)Flow Direction: B to A / Free Flow Through Check ValvePressure Drop CurvesFlow Direction: A to B / Throttled FlowDimensionsModel CodeRV - 06 - 01 .X / 5 - 25Check Valve RV = Inline Mounting RVP = Manifold MountingNominal SizesNom Size SAE (RV Only) NPT F (RV Only) BSPP (RV Only) (RV + RVP) Tube Size Thread Size Pipe Size Pipe OD Thread Size 06 = -2 5/16-24 UNF 1/8” 0.405” G1/8 08 = -4 7/16-20 UNF 1/4” 0.540” G1/4 10 = -6 9/16-18 UNF 3/8” 0.675” G3/8 12 = -8 3/4-16 UNF 1/2” 0.840” G1/2 16 = -12 1-1/16-12 UN 3/4” 1.050’ G3/4 20 = -16 1-5/16-12 UN 1” 1.315” G1 25 = -20 1-5/8-12 UN 1-1/4” 1.660” G1 1/4 30 = -24 1-7/8-12 UN 1-1/2” 1.900” G1 1/2 40 = -32 2-1/2-12 UN 2” 2.375” G2Housing Material 01 = Carbon Steel Modification NumberPort Configuration(omit) = RVP only 0 = BSPP to DIN 3852, Part 2-X 5 = NPTF - ANSI/ASME 1.20.3 Taper Pipe Thread 12 = SAE - SAEJ1926 Ports with ISO 725 Threads and O-Ring Sealing Cracking Pressure (omit) = 7 psi (standard) 25 = 25 psi 65 = 65 psiNote: Not recommended for high-cycle applications!Model Codes containing selections listed in RED are non-standard items – Minimum quantities will apply – Contact HYDAC for information and availabilityNot all combinations are availableSpecifications• 5000 psi operating pressure • 9 Sizes, 1/8” - 2”• NPT or SAE O-Ring connections and manifold mounting • Flows to 150 gpm • Carbon Steel Housing• FPM (Fluoroelastomer) O-Rings (for RVP series)• Metal to metal seal design for poppet • Hardened and ground steel poppet• 3 Cracking Pressures: 7 psi (standard), 25 psi and 65 psi (optional)•Temperature Range: -4° to 212°F at full pressureHydraulic SymbolRV & RVP SeriesCheck ValvesRV SeriesInline MountingRVP SeriesManifold Mounting1) Only 4 mounting holes are used on sizes 06, 08, 10, & 12Dimensions are for general information only, all critical dimensions should be verified by requesting a certified print.Dimensions are in inches/(mm) and lbs./(kg.)RV Inline Check ValvesRV-06... to RV-16...Q (l/min)∆p (b a r )864208040160120020010RV-20... to RV-40...Q (l/min)∆p (b a r )86420500400300200100060010RV-25RV-30RV-40RV-20RVP-06... to RVP-16...Q (l/min)∆p (b a r )86418161420121020RVP-20... to RVP-40...Q (l/min)∆p (b a r )86420104002005003001000600RVP-25RVP-30RVP-40RVP-20Pressure Drop CurvesFlow Direction: B to A / Free Flow Through Check Valve (A to B is Completely Blocked)Pressure Drop curves were established by using mineral oil with kinematic viscosity 335 SUS at 86°F / 30°CDimensionsBDV, DRV, & RV SeriesStainless Steel Flow Control Valves - Available with BSPP PortsRV SeriesInline Mounting Check valvesDV SeriesInline Mounting Needle Valves DRV Series Inline MountingFlow Control Valves Model Codes containing selections listed in RED are non-standard items – Minimum quantities will apply – Contact HYDAC for information and availabilityNot all combinations are available。

EM型电动换向阀(40MPa)/pro43.htm（第 1／3 页）2010-6-25 11:49:18EM型电动换向阀(40MPa)/pro43.htm（第 2／3 页）2010-6-25 11:49:18EM型电动换向阀(40MPa)/pro43.htm（第 3／3 页）2010-6-25 11:49:18SRB系列手动润滑泵SRB系列手动润滑泵一、使用条件 手动润滑泵是一种人力板动手柄操作排出润滑剂的小型润滑泵，可直接安装于机器的壁板或机架上。

基本型可直接与单线分配器组成手动单线集中润滑系统；基本型配上换向阀与双线分配器组成手动双线终端式集中润滑系统。

本泵适用于润滑频率较低（一般给油间隔为8小时以上），配管DN10长度不超过50米，润滑点不超过40点的单机小型设备上，作为集中润滑供送润滑剂的装置。

二、技术参数 适用介质为锥入度不低于265(25℃，150g)1/10mm的润滑脂(NLGI0#～2#)和粘度等级大于N68的润滑油，适用环境温度-10℃～40℃三、外形尺寸/pro70.htm（第 1／5 页）2010-6-25 11:50:08SRB系列手动润滑泵/pro70.htm（第 2／5 页）2010-6-25 11:50:08SRB系列手动润滑泵四、型号说明五、工作原理 手动润滑泵是人工扳动手柄，通过齿轮1带动齿轮活塞2往复运动实现给脂的。

当活塞处于图示右端极限位置时，左端油腔容积增大形成真空，于是贮油筒内的润滑剂在弹簧和活塞片的作用下从吸油口吸入活塞左端油腔内。

当活塞向左移动时，被吸入的润滑剂压入孔道Ⅰ并把滑阀4推向右端极限位置，顶开单向阀5从出油口排出，此时，活塞右端油腔容积逐渐增大，润滑剂被吸入，在活塞返回向右移动时，充满润滑剂的油腔又逐渐变小，挤压润滑剂进入孔道Ⅱ，推动滑阀4向左移动，顶开单向阀5从出油口排出，泵底部配装换向阀，扳动换向手柄至左右二极限位置可实现双线供剂。

/pro70.htm（第 3／5 页）2010-6-25 11:50:08SRB系列手动润滑泵六、操作方法单线型： 1、将回油指示器的指示杆推进。

ZHA & ZBA Series Heat Reactivated Desiccant DryersZHA & ZBA Series Externally Heated and Blower Purge Desiccant Air DryersParker Zander Externally Heated and Blower Purge Desiccant Air Dryers use the adsorption method to remove moisture from compressed air. Nominal pressure dew points ranging from -40°F (-40°C) to -100°F (-70°C) are achieved by directing the flow of saturated compressed air over a bed of desiccant.The most commonly used desiccant is activated alumina, a spherically shaped, hygroscopic material, selected for its consistent size, shape and extreme surface to mass ratio. This physically tough and chemically inert material is contained in two pressure vessels commonly referred to as “dual” or “twin” towers. Asthe saturated compressed air flowsthrough the bed of the “on-line”tower, its moisture content adheresto the surface of the desiccant.The dry compressed air is thendischarged from the vessel into thedistribution system.An Allen Bradley® PLC cycles theflow of compressed air between thetowers. While one tower is “on-line”drying, the other tower is “off-line” regenerating. Regeneration,sometimes referred to as “purging”,is the process of stripping theaccumulated moisture from the “off-line” bed.Both types of Parker Zander heatreactivated dryers combine heatwith either a small portion of thedried compressed air or with forcedambient air to affect regeneration.The heated, low pressure purgeair flows gently through theregenerating bed, adsorbing themoisture that accumulated on thesurface of the desiccant during thedrying cycle and exhausting it to theatmosphere.0212/fafFlow SchematicParker Zander’s patented Multi-Port Regeneration System (TWP Series) affects superior desiccant bed regeneration and, as a result, provides better and more consistent performance. The Multi-PortRegeneration System injects heated purge air at precise points up and down the towers’ length providing a more balanced distribution of heat. This system prevents the desiccant on top from prematurelydeteriorating while providing the bottom of the chamber with enough heated purge air to allow complete regeneration on every cycle. The energy saving temperaturemonitoring system senses the exiting purge air temperature. When the purge air temperature increases to a pre-set point at which the desiccantZHA Externally Heated withPatented Multi-Portpre-exhaust valvemain-exhaust valveair inexhaust mufflersd r y i n gh e a t e rpurge regulatorair outinlet valver e g e n e r a t i n gZBA Series Blower Purgepre-exhaust valvemain-exhaust valveair inexhaust mufflersblowerd r y i n gh e a t e rr e g e n e r a t i n gcooldown valveair outinlet valvebed is fully heated and regenerated, the heater is turned off.Parker Zander’s Primary Blowdown System is standard on all ZHA Series and ZBA Series heat reactivated air dryers 1000 scfm and larger. It improves performance and efficiency while increasing desiccant life. The depressurization stage alsostrips moisture from the bottom of the tank through a purge muffler. Once depressurization is complete, the system switches to the main exhaust where final regeneration is accomplished with low pressure purge air. By eliminating the main exhaust mufflers, back pressure is also eliminated which allows formore thorough regeneration and less maintenance.Up Flow Versus Down Flow Drying In the event of prefilter/auto drain failure, up flow drying protects the desiccant bed from contamination of bulk liquids and oil since they stay on the bottom of the tank and get discharged during blowdown. With downflow drying, any liquids put into the dryer by inefficient pre-filtration or drain failure will collect at the bottom of the vessel. As a result of this liquid presence, the upflow regeneration cannot lift the liquid slugs through the entire desiccant bed, resulting in liquid being sent downstream at tower switch over.Note:The exhaust is typically overhead and can present a safety concern with downflow drying.04 12Information CenterCParker Zander Division’s touch screen interface controller comes in an all inclusive package for all of our heated and blower purge dryers. These dryers ranging from 200 scfm and larger include an LCD user interface and responsive data retrieval for all your important dryer information. This custom innovative touch screen control is cutting-edge andguarantees hassle-free dryer maintenance and diagnostics.Historical Data Trend - DewpointReal-Time Sensor DataFeatures:• 7” HMI, Allen-Bradley® PLC• Flash drive port for transferring data log • Serial communications port (optional)• Remote panel access via ethernet communications port• Full color graphics touch panel control for user interface• User friendly help screens assist in troubleshooting • 120 VAC power and control solenoids (Other power options available)• Heatless backup operation • Manual stepping• Supplemental cooldown (ZBA Series)• Alarms with alarm relay• Tower failed to blow down (switch failure) • Tower failed to pressurize• High and low purge temperatures • High muffler pressure• Low purge pressure (ZHA Series) • High inlet temperature • Low inlet pressure• High pre and after filter (1200 scfm and larger) differential pressures• Blower overload (blower purge only) • Low blower flow • Stuck drain switch• High and low user sensor values • Sensor probe failure for all sensors • Emergency stop and standby mode • Ecotronic energy management system • Digital dewpoint readout • High humidity alarm• Optional 4-20 mA signal output• Two extra user defined 4-20 mA inputs with setpoints and alarms for connection to your flow meter, power meter, etc.• Automatic data logging 24/7, 365 days of all operational information • QR code for live chat/faf• 7” user friendly touch screen interface controller • Run/standby mode • Heatless back up mode • Manual stepping • Switch failure alarm• Automatic data logging with flash drive port for transferring data• Temperature pressure indication package with digital display and alarms• Troubleshooting screens•Ecotronic energy management system • Digital dewpoint readout • Digital dewpoint control • High humidity alarm• Optional 4-20 mA signal output • Emergency stop• ETL listed (UL/CSA Standards)•QR code for live chatLow Voltage Control BoxHigh Voltage Control Box• Single point connection• Dual contactors for heater control• Primary cycling contactor controls heater operation • Secondary over-temperature contactor protects circuit• ThermaLoc TM redundant heater contactors provide the maximum in heater system protection (5 year heater warranty)• Built-in fused secondary voltage transformer •Blower overload protection and motor starters(DBA Series)SupportAlarm/Troubleshoot Control Enclosures0608Complete Air Treatment SystemWithout proper filtration, desiccant air dryers will not operate. Desiccant dryers are designed to adsorb vapor from compressed air, they are not designed for liquid. When liquid, especially oil, is allowed to enter the desiccant chamber, it coats the desiccant material preventing any further adsorption. Oil coated desiccant can not be regenerated, and must be replaced.The coalescing pre-filter is installed at the dryer inlet. It protects the dryer by removing liquids and reducing the contamination level of the compressed air. A differential pressure gauge is provided to determine element condition.An automatic float drain is providedCompressed Air Quality to ISO 8573.1 - the industry standard method for specifying compressed air cleanlinessThe ISO 8573.1 international standard forcompressed air quality provides a simple system of classification for the three main contaminants present in any compressed air system - Dirt, Water, and Oil. To specify the quality classrequired for a particular application, simply list the class for each contaminant.on systems 10 through 6000 scfm to ensure proper drainage.To protect downstream equipment from desiccant dust, a hightemperature particulate after-filter is installed at the dryer discharge. The after-filter element is designed to remove solid particulates from compressed air. The hybrid pleated filter media provides high dirt retention, low pressure drop, and long element life. A differential pressure gauge is provided to determine element condition.(Standard, Package “B” ZHA/ZBA200 - ZHA/ZBA800)Includes dryer with factory installed pre-filter and after-filter with system bypass(optional DTA 1000 & larger)(Standard, Package “F” ZHA/ZBA1000 & Larger)Includes dryer with shipped loosepre-filter and after-filter(Optional, Package “D”)Includes dryer with factory installed dual selectable pre and after-filters with systembypassPackage SchematicIn-line Filter(ZHA/ZBA200 and larger)/fafEnergy savings can be achieved with the proven Ecotronic energy management system.Regeneration requirements are dependent on flow, pressure and temperature. The Ecotronic system allows the cost of drying compressed air to be matched exactly to your plant conditions.Ecotronic controls the drying cycle by continuously reacting to the loading under which the dryer is operating and minimizes the energy input required.As dryers rarely operate at full rated capacity all of the time (eg. during shift work and periods of low demand), this energy management system will provide considerable savings.Ecotronic Energy Management System StandardHeated Dryer ControllerPower Saver State - Green background0812High Performance ComponentsAngle Seat ValvesDryers up to 800 scfm are equiped with angle seat valves. Versittile and durable best describes these valves which can surpass millions of cycles.Actuated Butterfly ValvesHigh Performance Actuated Butterfly Switching Valves are standard on dryers 1000 scfm and larger. These premium, air operated butterfly valves are specifically designed for compressed air. They provide more opening and closing force compared to other types of valves. An indicator shows the “opened/closed” position of the valve and service can be performed without disturbing dryer piping.Tower insulationThe tower, heater, and purge lines are insulated to increase dryer performance and efficiency by reducing radiant heat loss. It also keeps the unit within the safety parameters set forth by OSHA.Insulation suitable for indoor service is standard on all Parker Zander heat reactivated dryers (Insulation suitable for outdoor service is an available option).Angle Seat ValvesZHA/ZBA200 - DHA/DBA800Actuated Butterfly Valves ZHA/ZBA1000 & Larger• High performance poppet valve• Stainless steel body • Stainless steel internals • PTFE seal• Air activated, spring return • Visual position indicator on exhaust valves• ANSI Class VI shutoff • Long service life • Repair kits available •5 year valve warranty• High performance butterfly valve • Non-lubricated • Carbon steel body• Stainless steel internals • RTFE seat• Double offset stem and disc design for reduced seatwear and zero leakage • Repair kits available •5 year valve warrantyValves - 5 Year Warranty/fafStandard EquipmentOptionsAllen Bradley ® PLC • 7” LCD Touchscreen• All critical information available • Automatic data loggingEcotronic TM Energy Demand Control • Digital dewpoint readout • Digital dewpoint control • High humidity alarm • Repressurization circuitFactory Installed Filtration (ZHA/ZBA 200-800)• Single point connection for system integrity • Differential pressure indicators for element condition • Filter drain(s)Switching Valves• Five year switching valve warranty frommanufacturer’s defects (see warranty policy)Heater• Five year heater warranty frommanufacturer’s defects (see warranty policy)Additional Features• Energy savings temperature monitoring system • Heatless backup mode• Separate tower pressure gauges • Exhaust mufflers with safety relief • ASME/CRN vessels • Tower insulation• Desiccant fill and drain ports • Safety relief valves• Stainless steel diffuser screens • Control air line filter• ETL listed (UL/CSA standards)• LED din connector(s) all solenoid valves • 480 VAC power (other options available -consult factory)• Steel base ZHA/ZBA 1000 and larger • Two year dryer warranty (parts and labor)• Custom filter packaging • All NEMA classifications• Control air tubing - stainless steel• Low ambient package (-20°F to +40°F air temperature)• Instrumentation–Locally mounted pressure and temperature gauges at inlet and outlet • ASME B31.3 piping • Corrosion allowanceContact Factory for additional options, customization, and specificationsMEMBER OFEngineering Data Specifications10 12Product Selection -40°F (-40°C) with Activated Alumina DesiccantNotes1. Above information should be used as a guideline. Flows are at 100 psig inlet pressure, 100°F inlet temperature and 100°F ambient temperature. For specific applications, please consult Parker Zander Technical Services.2. For sizing at other temperatures and pressures, please consult factory.3. Weight includes desiccant (shipped loose ZHA2000 and up).4. Dimensions and weight shown on Models ZHA200—ZHA800 includes dryer with factory installed pre and after filter with system bypass.5. Dimensions and weight shown on Models ZHA1000 or larger dryer only (filters are shipped loose).6. Pressure relief valve variance +/- 10%.Correction FactorsTo obtain dryer capacity at new conditions, multiply nominal capacity x C1 x C2./fafProduct Selection -40°F (-40°C) with Activated Alumina DesiccantNotes1. Above information should be used as a guideline. Flows are at 100 psig inlet pressure, 100°F inlet temperature and 100°F ambient temperature. For specific applications, please consult Parker Zander Technical Services.2. For sizing at other temperatures and pressures, please consult factory.3. Weight includes desiccant (shipped loose Models ZBA2000 and up).4. Dimensions and weight shown on Models ZBA200—ZBA800 includes dryer with factory installed pre and after filter with system bypass.5. Dimensions and weight shown on Models ZBA1000 or larger dryer only (filters are shipped loose).6. Pressure relief valve variance +/- 10%.Correction FactorsTo obtain dryer capacity at new conditions, multiply nominal capacity x C1 x C2.North AmericaCompressed Air TreatmentGas Separation & Filtration DivisionZander/Finite/domnick hunter/Zander Lancaster, NY 716 686 6400/faf BalstonHaverhill, MA 978 858 0505/balstonEngine FiltrationRacorModesto, CA 209 521 7860/racor Holly Springs, MS 662 252 2656/racorHydraulic FiltrationHydraulic & Fuel FiltrationMetamora, OH 419 644 4311/hydraulicfilter Laval, QC Canada 450 629 9594 VelconColorado Springs, CO 719 531 5855 Process Filtrationdomnick hunter Process Filtration SciLogOxnard, CA 805 604 3400/processfiltrationWater PurificationVillage Marine, Sea Recovery, Horizon Reverse OsmosisCarson, CA 310 637 3400/watermakersEuropeCompressed Air Treatmentdomnick hunter Filtration & SeparationGateshead, England +44 (0) 191 402 9000 /dhfnsParker Gas SeparationsEtten-Leur, Netherlands +31 76 508 5300/dhfnsHiross ZanderEssen, Germany +49 2054 9340/hzfd Padova, Italy+39 049 9712 111 /hzfdEngine Filtration & Water PurificationRacorDewsbury, England +44 (0) 1924 487 000 /rfdeRacor Research & DevelopmentStuttgart, Germany +49 (0)711 7071 290-10Hydraulic FiltrationHydraulic FilterArnhem, Holland +31 26 3760376/hfde Urjala, Finland +358 20 753 2500Condition Monitoring Parker KittiwakeWest Sussex, England +44 (0) 1903 731 470 Process Filtrationdomnick hunter Process Filtration Parker Twin Filter BVBirtley, England+44 (0) 191 410 5121/processfiltrationAsia PacificAustraliaCastle Hill, Australia +61 2 9634 7777/australiaChinaShanghai, China +86 21 5031 2525 /chinaIndiaChennai, India +91 22 4391 0700 /indiaParker FowlerBangalore, India +91 80 2783 6794JapanTokyo, Japan +81 45 870 1522/japanKoreaHwaseon-City +82 31 359 0852/koreaSingaporeJurong Town, Singapore +65 6887 6300/singaporeThailandBangkok, Thailand +66 2186 7000/thailandLatin AmericaParker Comercio Ltda. Filtration DivisionSao Paulo, Brazil +55 12 4009 3500 /brPan American DivisionMiami, FL 305 470 8800/panamAfricaAeroport Kempton Park, South Africa +27 11 9610700/africaParker Hannifin CorporationGas Separation & Filtration Division 4087 Walden Avenue Lancaster, NY 14086phone 800 343 © 2016 Parker Hannifin Corporation. Product names are trademarks or registered trademarks of their respective companies.Worldwide Filtration Manufacturing LocationsPublication: ZHA & ZBA SeriesRev 000 NA 07/2016。

6 x 28 EXTRA-FLOW PRODUCT DATA SHEETNOTE: All dimensions are nominalvalues168 mmIndustrial Business Group Membranes Business Unit 13840 South Lakes Drive Charlotte, North Carolina 28273 USAPhone: +1 704 587 8888Fax: +1 704 587 86103M Deutschland GmbHMembranes Business UnitÖhder Straße 2842289 WuppertalGermanyPhone: +49 202 6099 - 658Fax: +49 202 6099 - 7503M Japan Ltd.Membranes Business Unit6-7-29, Kita-Shinagawa,Shinagawa-ku, Tokyo | 141-8684JapanPhone: +81 3 6409 5732Fax: +81 3 6409 58276 x 28 EXTRA-FLOW PRODUCT DATA SHEET Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believesare reliable, but the accuracy or completeness of such information is not guaranteed.Product Use:Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particularapplication. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determiningwhether it is fit for a particular purpose and suitable for user’s method of application.Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrantsthat each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESSOR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSEOR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform tothis warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidentalor consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.3M, Membrana, and Liqui-Cel are trademarks of 3M Company. All other trademarks are the property of their respective owners.© 2015 3M Company. All rights reserved. (D67 Rev 16)。

Leading liquid desiccant technologyAlfa Laval Kathabar dehumidi fi cation systems are engineered solutions for temperature and humidity control for industrial, commercial, educational, institutional and green/LEED facilities. These cost-effective dehumidi fi cation and energy recovery systems have been usedto clean and dehumidify air for a wide range of industries worldwide – including pharmaceutical, investment casting, healthcare, cold storage, food and beverage, and many more.These systems help to improve the reliability, economy and ef fi ciency of any manufacturingor processing operation that is humidity, temperature or microorganism-sensitive. Whether your space conditions are 78°F and 20% RH, 45°F and 40% RH, or -20°F and -40°F dew point, the Alfa Laval Kathabar system can provide controlled conditions – resulting in an improved bottom line. Bene fi ts of liquid technology:• Simultaneous dehumidi fi cation anddirect air coolingSimple design provides high energy ef fi ciency• Microbiological decontaminationEffective biocide captures and neutralizesairborne pathogens• Performance reliabilityNon-vaporizing desiccant has in fi nite life• Energy savings – 100% modulationcapacityLess energy is required to operate than drydesiccant or mechanical refrigeration systems• Precise humidity control (+/-1%RH)Fully adjustable humidity level based on liquiddesiccant concentration and temperature• Frost-free coolingTemperatures as low as -60°F with no coil tofreeze up or defrost• FRP (fi berglass) non-metallic industrialconstructionLong equipment life, reliability and reducedmaintenance• Design fl exibilityUse of hot water or low pressure steamfor regeneration (including waste heat);multiple conditioners with single centralizedregenerator; vertical and horizontal air fl oworientations availableEconomic value comparisonWith increased awareness of energy costs, companies evaluatethe total cost to own and operate equipment, rather than initialcost alone. An Alfa Laval Kathabar evaluation considers thefi rst cost, installation cost and operating costs for dry and liquiddesiccant dehumidi fi cation systems. We then calculate the costfor various systems and present the economic value comparisonbased on speci fi c ASHRAE local weather data, customers’actual energy costs and system operating schedule.To ensure the evaluation does not leave anything up to question,we then compare both liquid and dry desiccant systems toconventional refrigeration systems, in order to determine thebest solution for your speci fi c needs. Simply ask your AlfaLaval Kathabar representative to prepare an economic valuecomparison for your application.Sea level imperial unitsTemperature (°F)Humidityratio(gr/lb)Advanced dehumidi fi cation systemsPerformance guaranteeLike-new dehumidi fi cation performance can be achievedthrough the life of the equipment – regardless of reapplication,relocation or airborne contaminants. Alfa Laval Kathabarprovides free Kathene® liquid solution laboratory checks for allinstallations. To take advantage of this free service, customersare asked to send a small sample of Kathene from theirequipment to our laboratory every six months.Through this process, the Kathene solution can be maintainedat maximum dehydrating capacity, which ensures the desiredperformance of the unit. This free Kathene solution testingservice can also identify potential impurities in the systems,allowing for adjustments even while equipment is in operation.How it works Alfa Laval Kathabar liquid desiccant dehumidi fi cation systems operate on the principle of chemical absorption of water vapor from air. The absorbent solution, Kathene, is a desiccantsolution composed of lithium chloride salt and water. Kathene is non-toxic, will not vaporize, and is not degraded by common airborne contaminants.The ability of Kathene to remove or add water vapor from the air is determined by the temperature and concentration of the solution. The concentration of Kathene can be adjusted to deliver air at any desired relative humidity between 18%and 90%. For a given Kathene concentration, lower solution temperatures enable the conditioner to deliver cooler, dryer air.The illustration below shows the basic elements of an Alfa Laval Kathabar system. In operation, air to be conditioned is cooled and dehumidi fi ed by contacting Kathene in the conditioner. By continuously circulating the desiccant through a heat exchanger, energy is extracted from the air and transferred to a coolant. The amount of heat extracted by the Alfa Laval Kathabar dehumidi fi er is modulated to exactly match the load by controlling coolant fl ow through the heat exchanger.Process airProcess airEnd-suction pumpEnd-suction pumpLiquid desiccant systems overviewAlfa Laval Kathabar offers a full line of liquid desiccant system series including, FV , FH, FP and SP . There are common features to the systems, along with features unique to each system. Application speci fi cations including air fl ow capacities, heat sources, space limitations and power requirements determine which liquid desiccant system will provide the best solution.Alfa Laval Kathabar FV – Vertical discharge conditionerIdeal for all applications. The FV design has the greatest latent and sensibleperformance, lowest unit air pressure drop, smallest footprint and lowest equipment cost. The conditioner can be designed with process fans available in upblast, front or rear air discharge arrangements. Units up to 25,000 CFM are available as packaged units, with pump and heat exchanger factory mounted on an extended skid base with desiccant piping complete.The vertical unit applies to industrial buildings and production rooms which often have limited fl oor space and high ceilings. They also have the fl exibility to incorporate multiple conditioners and a single regenerator.Alfa Laval Kathabar FH – Horizontal discharge conditionerIdeal for all applications. The FH design is best suited for applications where space height limitations prohibit the use of the FV series. These units also fi t well whenprocess air is being delivered to horizontal AHU’s and can easily be used in custom airhandling units for a total packaged indoor or outdoor installation. Like the FV series, units can be supplied with the pump and heat exchanger factory mounted and piped on an extended skid base.FH conditioners are commonly applied to commercial buildings or penthouses which do not have the head room required by the FV conditioners. Applications such as hospitals and labs often require the FH approach.Alfa Laval Kathabar FP – Fiberglass packed regeneratorIdeal for all applications. The packed tower regenerators are used with all FV and FH conditioners. The range of unit sizes are available in moisture removal capacities from 120#/Hr to 6000#/Hr. The high ef fi ciency contact packing and use of external heat exchangers offers unlimited design fl exibility capable of using heat sources as low as 140°F (60°C).FP regenerator applies for most applications that have a larger moisture load or several conditioners such as breweries, food and candy manufacturing. They come in a large range of sizes and can be remotely located from the conditioner or conditioners.Alfa Laval Kathabar SP – Small packaged conditioner/regeneratorIdeal for all applications with smaller air fl ow capacities from 1500 CFM to 7500 CFM. The SP series is also a vertical air fl ow design for high ef fi ciency. These factory packaged systems are a plug-and-play designed system, requiring only plant utilities and power to a single point.SP units are ideal for smaller applications such as water works, casting applications, pharmaceutical drying rooms and fi lling areas. They are compact, ready to go skid mounted and packaged units.Alfa Laval Kathabar FV –Vertical discharge conditioner overview Alfa Laval Kathabar FV features:• Vertical air fl ow discharge• Optional process fan (up to 36,000 CFM)• Housing of industrial grade fi berglass construction with internal parts of non-metallic engineered plastics• Free standing pump and pump tank assembly with vertical sealless fi berglass Kathene pump • Kathene solution fi ltering• Modular design to integrate with other air system components • Inlet air fi ltration plenumsComponents:A. FRP body/housingB. FRP pump tankC. Kathene spray pumpD. Heat exchangerE. Spray pressure valve F . Fan adapter plenum G. Process air fan H. Bypass fi lter cartridge I. Desiccant pipingOptional packaged vertical conditioner denoted FVP con fi guration is available. FVP features include:• Air fl ows from 1,500 CFM to 25,000 CFM • Horizontal end-suction Kathene pump with sealless magnetically coupled motor• Unit base platform of FRP clad construction with pump and heat exchanger factory mounted • Factory installed Kathene piping from unit-to-pump-to-heat exchanger-to-sprayAlfa Laval Kathabar FV – Vertical dischargeconditioner sizing informationUnit sizeAirflow (maximum)Airflow (minimum)Approximate dimensions Approximate weight CFMM3/hrCFMM3/hrInches CentimetersLbsKg* Unit sizes FV 240, FV 400 and FV 600 are not exactly as shown above.+ Fans not provided on unit sizes FV 4000, FV 5000, FV 6000 and FV 7000; refer to H+ dimension on drawing for height.Alfa Laval Kathabar FH –Horizontal discharge conditioner overview Alfa Laval Kathabar FH features:• Horizontal inlet and discharge air fl ow • Desiccant is distributed without sprays• Housing of industrial grade fi berglass construction with internal parts of non-metallic engineered plastics • Free standing pump and pump tank assembly with vertical sealless fi berglass Kathene pump • Kathene solution fi ltering• Modular design to integrate with other air system componentsComponents:A. FRP body/housingB. FRP pump tankC. Kathene spray pumpD. Heat exchangerE. Spray pressure valve F . Bypass fi lter cartridge G. Desiccant pipingOptional packaged horizontal conditioner denoted FHP con fi guration is available. FHP features include:• Air fl ows from 5,000 CFM to 20,000 CFM • Horizontal end-suction Kathene pump with sealless magnetically coupled motor• Unit base platform of FRP clad construction with pump and heat exchanger factory mounted • Factory installed Kathene piping from unit-to-pump-to-heat exchanger-to-sprayAlfa Laval Kathabar FH – Horizontaldischarge conditioner sizing informationUnit size Airflow (maximum)Airflow (minimum)Approximate dimensions Approximate weight CFMM3/hrCFMM3/hrInches CentimetersLbsKgAlfa Laval Kathabar FP – Fiberglass packed regenerator overview Alfa Laval Kathabar FP features:• Vertical air fl ow discharge• Optional interchanger for energy savings • Housing of industrial grade fi berglass construction with internal parts of non-metallic engineered plastics• Free standing pump and pump tank assembly with vertical sealless fi berglass Kathene pump • Inlet air fi ltrationComponents:A. FRP body/housingB. FRP pump tankC. Kathene spray pumpD. Heat exchangerE. Spray pressure valve F . Exhaust plenum G. Desiccant piping H. Regenerator fanOptional packaged regenerator con fi guration is available in all sizes.FP features include:• Horizontal end-suction Kathene pump with sealless magnetically coupled motor• Unit base platform of FRP clad construction with pump and heat exchanger factory mounted • Factory installed Kathene piping from unit-to-pump-to-heat exchanger-to-spray in fi berglassAlfa Laval Kathabar FP – Fiberglasspacked regenerator sizing informationUnit sizeInlet airflow (minimum)Approximate dimensions Approximate weight CFMM3/hrInches CentimetersLbsKg*Unit sizes FP 1.5, FP 3 and FP 6 do not come with pump tank and are not exactly as shown above.Alfa Laval Kathabar SP – Small packagedconditioner/regenerator overview Alfa Laval Kathabar SP features:• SP units combine both the conditioner and regenerator into a single component for easy installation with all wiring, controls and Kathene piping factory complete and tested • Sizes are available in air fl ows ranging from 1,500 CFM to 7,500 CFM • Vertical air fl ow discharge • Horizontal end-suctionconditioner and regenerator Kathene pump with sealless magnetically coupled motor • Unit base platform of FRP clad construction with Kathene pumps and heat exchangers factory mounted and pipedComponents:A. FRP body/housingB. Kathene spray pump(s)C. Heat exchangerD. Process air fanE. Bypass fi lter cartridge F . Desiccant piping G. Regenerator fan H. PLC control panelAlfa Laval Kathabar SP – Small packagedconditioner/regenerator sizing informationUnit sizeAirflow (maximum)Airflow (minimum)Approximate dimensions Approximate weight CFMM3/hrCFMM3/hrInches CentimetersLbsKgDehumidification system liquid application questionnaireAlfa Laval Kathabar, Phone +1 716-875-2000, Email: ****************************, Web:Customer dataProject name: ___________________________________________________________________________________________________ Name: __________________________________________________________________________________________________________ Company: ______________________________________________________________________________________________________ Address: ________________________________________________________________________________________________________ City, State, Zip: __________________________________________________________________________________________________ Country: ________________________________________________________________________________________________________ Phone: ________________________________________________________________________________________________________ E-Mail: _________________________________________________________________________________________________________Outside air requirementsAirflow: _________________________ ACFM OSA temp: _____________________ °F OSA humidity: __________________ Gr/lb.Desired space conditionsSpace temp: ____________________________°F Space humidity: _________________________ Gr/lb.Space loadsSensible load: ___________________ Btu/Hr Latent load: _____________________ Bru/HrWinter humidification required?: Yes NoDelivered conditions to spaceAirfl ow: _________________________________ ACFMDelivered temp: __________________________ °F Delivered humidity: _______________________ Gr/lb.UtilitiesCoolant source: __________________ Coolant temp: ____________________ °F Heating source: ___________________Hot water temp/steam pressure: __________ °F / PSIGElectrical characteristicsVoltage: (Volts) __________________________Phase: _________________________________Frequency (Hz): _________________________andorPlease describe the location for the equipment installation. Provide room sketches with doors, slots, etc.Alfa Laval in briefAlfa Laval is a leading global provider of specialized products and engineered solutions.Our equipment, systems and services are dedicated to helping customers to optimize the performance of their processes. Time and time again.We help our customers to heat, cool, separate and transport products such as oil, water, chemicals, beverages, foodstuffs, starch and pharmaceuticals.Our worldwide organization works closely with customers in almost 100 countries to help them stay ahead.How to contact Alfa LavalAlfa Laval KathabarPhone +1 716-875-2000Email: **************************** Web: Contact details for all countries are continually updated on our website. Please visit .PFL00083 1510。

AAS 20 N, AAS 200/300 WN, EST 101 WN, ESR 200 WNKIT BILL OF MATERIALS CAN BE FOUND LISTED ON THE ‘KIT COMPONENTS’ PAGES IMMEDIATELY FOLLOWING CORRESPONDING PUMP PAGES.ALL AVAILABLE SPARES FOR THIS SERIES CAN BE FOUND LISTED ON THE ‘INDIVIDUAL SPARES’ PAGES AT THE END OF THIS SECTION.KITSFEATURED SPARESOVERHAUL KITSOVERHAUL KITS INCLUDE O-RINGS, PFPE PREPARED BEARINGS, PISTON RINGS, SHIMS, LOCK NUTS, WASHERS, SIGHT GLASS & OTHER COMPONENTS FOR PUMP OVERHAUL.MODEL(S) PART NUMBERAAS 20 N PEAAS20N AAS 200 WN PEAAS200WN AAS 300 WN PEAAS300WN EST 101 WN EST101WN ESR 200 WN PEESR200WNMOTOR SIGHT GLASS GASKETS MODEL(S) PART NUMBER ALLOIL LEVEL SENSOR SWITCHES MODEL(S) PART NUMBER ALL SIGHT GLASSES MODEL(S) PART NUMBERALL(MOTOR 50X6MM, ROUND)ALL(MODULE, 44X44X11MM)ALL(MODULE, 29X42X4MM)INVENTORY IS LIMITED ON KITS & SPARES FOR EBARA PUMPS. PLEASE CHECK WITH CUSTOMER SERVICE FOR AVAILABILITY AND LEAD TIMES.NOTEAAS 20 N, AAS 200/300 WN, EST 101 WN, ESR 200 WNKIT COMPONENTSAAS20N AAS200WN AAS300WN EST101WNPART NUMBER ITEMDESCRIPTIONOVERHAULPEAAS20NOVERHAULPEAAS200WNOVERHAULPEAAS300WNOVERHAULEST101WN6006ORING BEARING,6006,TEC,W/ORINGS46205ORING BEARING,6205,TEC,W/ORINGS6206ORING BEARING,6206,TEC,W/ORINGS7206AW BEARING,7206AW,PFPE7207AW BEARING,7207AW,PFPE6006ZPIN BEARING,BALL,PINNED,KRYTOX227204MS BEARING,MATCH SET (2),72047206MS BEARING,MATCH SET (2),72067208MS BEARING,MATCH SET (2),720827306MS BEARING,MATCH SET (2),7306227206MSC3BEARING,MATCH SET,(2) 7206AW7207MSC3BEARING,MATCH SET,(2) 7207AW330020BEARING,OPEN,PFPE26207E BEARING,OPEN,PFPE300137GASKET,RING,VITON480007L LOCKNUT,LEFT HAND,04480005L LOCKNUT,LEFT HAND,05480006L LOCKNUT,LEFT HAND,06223480007LOCKNUT,RIGHT HAND,04480005LOCKNUT,RIGHT HAND,05480006LOCKNUT,RIGHT HAND,06223480007LW LOCKWASHER,04480005LW LOCKWASHER,05480006LW LOCKWASHER,06446320231O'RING,VITON (BLACK),53.57X3MM320266O'RING,VITON,115.41X3MM320134O'RING,VITON,120 X 4 MM53598504O'RING,VITON,12X2.31MM320239O'RING,VITON,13.95X2.34MM02122097O'RING,VITON,139.5 X 3 MM320135O'RING,VITON,15 X 2.5 MM980342O'RING,VITON,15 X 2.5 MM980343O'RING,VITON,15 X 2.5 MM32320240O'RING,VITON,15.54X2.34MM14 02120037O'RING,VITON,15.6 X 2.4 MM980352O'RING,VITON,157 X 5.8MM320232O'RING,VITON,16X2.31MM15320137O'RING,VITON,17 X 2 MM5320265O'RING,VITON,173X4MM1320142O'RING,VITON,192 X 5.6 MM981338O'RING,VITON,200 X 5.65 MM320263O'RING,VITON,209.3X5.7MM1320143O'RING,VITON,210 X 5.6 MM1320144O'RING,VITON,212 X 5.6 MM2320242O'RING,VITON,215.27X5.34MM320264O'RING,VITON,219.3X5.7MM1320244O'RING,VITON,227.97X5.42MM320261O'RING,VITON,229.3X5.7MM1320146O'RING,VITON,233 X 5.7 MM1AAS 20 N, AAS 200/300 WN, EST 101 WN, ESR 200 WNKIT COMPONENTS (CONT.)AAS20N AAS200WN AAS300WNPART NUMBER ITEMDESCRIPTIONOVERHAULPEAAS20NOVERHAULPEAAS200WNOVERHAULPEAAS300WN980345O'RING,VITON,37.5 X 2 MM2 53598514O'RING,VITON,40X3MM2 320112O'RING,VITON,41.5 X 5.3 MM320251O'RING,VITON,47.22X3MM82018O'RING,VITON,53.34 X 5.33 MM085040944O'RING,VITON,55 X 3 MM2 23970121O'RING,VITON,55 X 3 MM320156O'RING,VITON,71 X 3 MM1 2122084O'RING,VITON,74.5 X 3 MM9 320157O'RING,VITON,75 X 3 MM26320182O'RING,VITON,75X3.0MM23970223O'RING,VITON,80 X 3 MM40010O'RING,VITON,82.22 X 2.62 MM989169O'RING,VITON,90 X 3085041782O'RING,VITON,94 X 3 MM320158O'RING,VITON,95 X 3 MM24 350015RING,PISTON350016RING,PISTON12 350017RING,PISTON4 350018RING,PISTON980033SHIM,BRASS,14X7X0.01MM12980042SHIM,BRASS,37 X 30 X .05MM16500016SIGHT GLASS,OIL,PLASTIC500018SIGHT GLASS,OIL,PLASTIC250015SLEEVE,SPLIT,SET,INNER & OUTER,28420036WASHER,WAVE,3 WAVE,SSR4AA 10/20/200, AA 70 W, AA 100 WNKIT BILL OF MATERIALS CAN BE FOUND LISTED ON THE ‘KIT COMPONENTS’ PAGES IMMEDIATELY FOLLOWING CORRESPONDING PUMP PAGES.ALL AVAILABLE SPARES FOR THIS SERIES CAN BE FOUND LISTED ON THE ‘INDIVIDUAL SPARES’ PAGES AT THE END OF THIS SECTION.KITSFEATURED SPARESOVERHAUL KITSOVERHAUL KITS INCLUDE O-RINGS, PFPE PREPARED BEARINGS, PISTON RINGS, SHIMS, LOCK NUTS, WASHERS, SIGHT GLASS & OTHER COMPONENTS FOR PUMP OVERHAUL.MODEL(S)PART NUMBERAA 10 PEAA10AA 20 PEAA20AA 70 WPEAA70W AA 100 WN PEAA100WNAA 200PEAA200MOTOR SIGHT GLASS GASKETS MODEL(S) PART NUMBER ALL 300051OIL LEVEL SENSOR SWITCHES MODEL(S) PART NUMBER ALL 290007SIGHT GLASSES MODEL(S) PART NUMBERALL(MOTOR 50X6MM, ROUND) 9819 ALL(MODULE, 44X44X11MM) P322890ALL(MODULE, 29X42X4MM) P322891INVENTORY IS LIMITED ON KITS & SPARES FOR EBARA PUMPS. PLEASE CHECK WITH CUSTOMER SERVICE FOR AVAILABILITY AND LEAD TIMES.NOTEAA 10/20/200, AA 70 W, AA 100 WNKIT COMPONENTSAA10AA20AA70WPART NUMBER ITEMDESCRIPTIONOVERHAULPEAA10OVERHAULPEAA20OVERHAULPEAA70W6005ZPIN BEARING,BALL,PINNED,KRYTOX22 6006ZPIN BEARING,BALL,PINNED,KRYTOX2 330020BEARING,OPEN,PFPE2 330021BEARING,OPEN,PFPE222 330019BEARING,SHIELDED,TEC2480005L LOCKNUT,LEFT HAND,05222 480006L LOCKNUT,LEFT HAND,062 480005LOCKNUT,RIGHT HAND,05222 480006LOCKNUT,RIGHT HAND,062 480005LW LOCKWASHER,05444 480006LW LOCKWASHER,064 23949217O'RING,VITON,100 X 3 MM320134O'RING,VITON,120 X 4 MM980343O'RING,VITON,15 X 2.5 MM1202120037O'RING,VITON,15.6 X 2.4 MM320136O'RING,VITON,15.6 X 2.4 MM1210 320138O'RING,VITON,162 X 5.6 MM222 320267O'RING,VITON,164X3MM1320139O'RING,VITON,168 X 3 MM1 320140O'RING,VITON,171 X 5.6 MM222 320141O'RING,VITON,176 X 3 MM11 320142O'RING,VITON,192 X 5.6 MM1 320233O'RING,VITON,195 X 3 MM981338O'RING,VITON,200 X 5.65 MM1 320144O'RING,VITON,212 X 5.6 MM320145O'RING,VITON,219.3 X 5.7 MM2 320147O'RING,VITON,240 X 5.7 MM320148O'RING,VITON,25.12 X 1.78 MM244 314003O'RING,VITON,28 X 5 MM1 320149O'RING,VITON,28.3 X 1.78 MM12 320150O'RING,VITON,30 X 1.78 MM14 320151O'RING,VITON,31.47 X 1.78 MM320152O'RING,VITON,50 X 3 MM12 320153O'RING,VITON,56 X 3 MM222 320154O'RING,VITON,60 X 3 MM222 320155O'RING,VITON,65 X 3 MM222 320156O'RING,VITON,71 X 3 MM11 320157O'RING,VITON,75 X 3 MM7 350006RING,PISTON,32MM ID888 350004RING,PISTON,37MM ID980033SHIM,BRASS,14X7X0.01MM1212980041SHIM,BRASS,32 X 25 X .1MM64980042SHIM,BRASS,37 X 30 X .05MM250014SLEEVE,SPLIT,SET,INNER & OUTER,22 ID4250015SLEEVE,SPLIT,SET,INNER & OUTER,28420036WASHER,WAVE,3 WAVE,SSR420037WASHER,WAVE,3 WAVE,SSR2673454WASHER,WAVED,STEEL,M6A 07 V, A 10/25 S, A 30/70/150 WKIT BILL OF MATERIALS CAN BE FOUND LISTED ON THE ‘KIT COMPONENTS’ PAGES IMMEDIATELY FOLLOWING CORRESPONDING PUMP PAGES.ALL AVAILABLE SPARES FOR THIS SERIES CAN BE FOUND LISTED ON THE ‘INDIVIDUAL SPARES’ PAGES AT THE END OF THIS SECTION.KITSFEATURED SPARESO-RING KITSMODEL(S)PART NUMBERA 07 V PEA07VORING A 10 S PEA10SORING A 30 W PEA30WORING A 70 W PEA70WORING A 150 WPEA150WORINGOVERHAUL KITSOVERHAUL KITS INCLUDE O-RINGS, PFPE PREPARED BEARINGS, PISTONRINGS & SIGHT GLASS FOR PUMP OVERHAUL.MODEL(S)PART NUMBERA 07 V PEA07V A 10 S PEA10S A 25 S PEA25S A 30 W PEA30W A 70 W PEA70W A 150 WPEA150WMOTOR SIGHT GLASS GASKETS MODEL(S) PART NUMBER ALL 300051OIL LEVEL SENSOR SWITCHES MODEL(S) PART NUMBER ALL 290007SIGHT GLASSES MODEL(S) PART NUMBERALL(MOTOR 50X6MM, ROUND) 9819 ALL(MODULE, 44X44X11MM) P322890ALL(MODULE, 29X42X4MM) P322891INVENTORY IS LIMITED ON KITS & SPARES FOR EBARA PUMPS. PLEASE CHECK WITH CUSTOMER SERVICE FOR AVAILABILITY AND LEAD TIMES.NOTEKIT COMPONENTSA07V A07V A10SPART NUMBER ITEMDESCRIPTIONO-RINGPEA07VORINGOVERHAULPEA07VO-RINGPEA10SORING16006BEARING,OPEN,PFPE25205BEARING,OPEN,PFPE25207BEARING,OPEN,PFPE6207E BEARING,OPEN,PFPE6004BEARING,SHIELDED,TEC,600426305ZZC3BEARING,SHIELDED,TEC,63052300051GASKET,MOTOR SIGHT GLASS2H02122079O RING 49.5 ID X 329803441O'RING,BUNA,21 X 2 MM1 980334O'RING,VITON,130 X 3 MM1 980343O'RING,VITON,15 X 2.5 MM2213 980352O'RING,VITON,157 X 5.8MM11980353O'RING,VITON,174.3 X 5.7MM22980337O'RING,VITON,188.56 X 5.65 MM2 320142O'RING,VITON,192 X 5.6 MM980338O'RING,VITON,195 X 5.65 MM2 980351O'RING,VITON,214.3 X 5.7MM22320145O'RING,VITON,219.3 X 5.7 MM23970016O'RING,VITON,22 X 1.5 MM22923069O'RING,VITON,22 X 1.5 MM2 980339O'RING,VITON,220 X 5.65 MM2 980340O'RING,VITON,230 X 5.65 MM1 923034O'RING,VITON,260 X 5.7 MM320184O'RING,VITON,278.77 X 5.33MM980344O'RING,VITON,28 X 2 MM222 900054O'RING,VITON,28 X 5MM1 980345O'RING,VITON,37.5 X 2 MM4 320119O'RING,VITON,39.5X3 MM22 900068O'RING,VITON,40 X 5MM2 989168O'RING,VITON,40 X 6.0 MM2 40012O'RING,VITON,50.17 X 5.33 MM1 981154O'RING,VITON,80 X 3.0MM980333O'RING,VITON,85 X 3 MM4 980350ORING,VITON,65 X 3MM22950001RING,PISTON8980058RING,PISTONP322891SIGHT GLASS,MODULE9819SIGHT GLASS,MOTOR,50X6MM,ROUND2A 30/70/150 WKIT COMPONENTSA30W A30W A70W A70W A150WPART NUMBER ITEMDESCRIPTIONO-RINGPEA30WORINGOVERHAULPEA30WO-RINGPEA70WORINGOVERHAULPEA70WO-RINGPEA150WORING5207BEARING,OPEN,PFPE44 5208BEARING,OPEN,PFPE6207E BEARING,OPEN,PFPE44 6208BEARING,OPEN,PFPEU30007193CARTON WHITE FRONT LOCKING1 300051GASKET,MOTOR SIGHT GLASS222 9803441O'RING,BUNA,21 X 2 MM1111 85039189O'RING,VITON,.41.28 X 2.62MM980348O'RING,VITON,100 X 4 MM11 980334O'RING,VITON,130 X 3 MM2222 320256O'RING,VITON,136.12 X 3.53 MM980343O'RING,VITON,15 X 2.5 MM27272727 02120037O'RING,VITON,15.6 X 2.4 MM980335O'RING,VITON,150 X 5.65 MM1111 923028O'RING,VITON,175 X 4980336O'RING,VITON,185 X 5.7 MM1111 980337O'RING,VITON,188.56 X 5.65 MM4444 980338O'RING,VITON,195 X 5.65 MM2211 923039O'RING,VITON,200 X 5.7 MM11 923069O'RING,VITON,22 X 1.5 MM2222 980339O'RING,VITON,220 X 5.65 MM4444 980340O'RING,VITON,230 X 5.65 MM923035O'RING,VITON,240 X 5.7 MM923034O'RING,VITON,260 X 5.7 MM11 980341O'RING,VITON,278 X 5.65 MM22 980344O'RING,VITON,28 X 2 MM4444 900054O'RING,VITON,28 X 5MM1111 320234O'RING,VITON,300 X 5.7 MM980345O'RING,VITON,37.5 X 2 MM8888 320119O'RING,VITON,39.5X3 MM2222 900068O'RING,VITON,40 X 5MM2222 989168O'RING,VITON,40 X 6.0 MM2222 923031O'RING,VITON,42 X 2 MM23970516O'RING,VITON,42 X 5 MM40012O'RING,VITON,50.17 X 5.33 MM1111 980333O'RING,VITON,85 X 3 MM8888 320158O'RING,VITON,95 X 3 MM929015RING,PISTON980058RING,PISTON1616 P322890SIGHT GLASS,MODULEP322891SIGHT GLASS,MODULE12 9819SIGHT GLASS,MOTOR,50X6MM,ROUND2240x20, 50x20, 65x40, 80x25, 150x40KIT BILL OF MATERIALS CAN BE FOUND LISTED ON THE ‘KIT COMPONENTS’ PAGES IMMEDIATELY FOLLOWING CORRESPONDING PUMP PAGES.ALL AVAILABLE SPARES FOR THIS SERIES CAN BE FOUND LISTED ON THE ‘INDIVIDUAL SPARES’ PAGES AT THE END OF THIS SECTION.KITSFEATURED SPARESO-RING KITSMODEL(S)PART NUMBER40X20 PE40205ORING 50X20 PE50206ORING 65X40 PE6540ORING 80X25 PE80256ORING 150X40PE15040ORINGOVERHAUL KITSOVERHAUL KITS INCLUDE O-RINGS, PFPE PREPARED BEARINGS, PISTONRINGS & SIGHT GLASS FOR PUMP OVERHAUL.MODEL(S)PART NUMBER40X20 PE4020550X20 PE5020665X40 PE654080X25 PE80256150X40PE15040MOTOR SIGHT GLASS GASKETS MODEL(S) PART NUMBER ALL 300051OIL LEVEL SENSOR SWITCHES MODEL(S) PART NUMBER ALL SIGHT GLASSES MODEL(S) PART NUMBERALL(MOTOR 50X6MM, ROUND)ALL(MODULE, 44X44X11MM)ALL(MODULE, 29X42X4MM)INVENTORY IS LIMITED ON KITS & SPARES FOR EBARA PUMPS. PLEASE CHECK WITH CUSTOMER SERVICE FOR AVAILABILITY AND LEAD TIMES.NOTE40x20, 50x20, 65x40KIT COMPONENTS40X2040X2050X2050X20PART NUMBER ITEMDESCRIPTIONO-RINGPE40205ORINGOVERHAULPE40205O-RINGPE50206ORINGOVERHAULPE50206O-RINGPE6540ORING5207BEARING,OPEN,PFPE24 6207E BEARING,OPEN,PFPE24 300051GASKET,MOTOR SIGHT GLASS22 923029O'RING,VITON,10 X 2 MM980334O'RING,VITON,130 X 3 MM1122 980343O'RING,VITON,15 X 2.5 MM13132222 980335O'RING,VITON,150 X 5.65 MM11 980336O'RING,VITON,185 X 5.7 MM11 980337O'RING,VITON,188.56 X 5.65 MM2244 980338O'RING,VITON,195 X 5.65 MM2222 923039O'RING,VITON,200 X 5.7 MM923036O'RING,VITON,210 X 5.7 MM923069O'RING,VITON,22 X 1.5 MM2222 980339O'RING,VITON,220 X 5.65 MM2244 980340O'RING,VITON,230 X 5.65 MM11923034O'RING,VITON,260 X 5.7 MM980344O'RING,VITON,28 X 2 MM2244 900054O'RING,VITON,28 X 5MM1111 980345O'RING,VITON,37.5 X 2 MM4488 320119O'RING,VITON,39.5X3 MM2222 900068O'RING,VITON,40 X 5MM2222 989168O'RING,VITON,40 X 6.0 MM2222 40012O'RING,VITON,50.17 X 5.33 MM11980346O'RING,VITON,55 X 4 MM1980347O'RING,VITON,70 X 4 MM11 923030O'RING,VITON,75 X 5.7 MM981154O'RING,VITON,80 X 3.0MM980333O'RING,VITON,85 X 3 MM4488 923032O'RING,VITON,S36980058RING,PISTON816 P322891SIGHT GLASS,MODULE11 9819SIGHT GLASS,MOTOR,50X6MM,ROUND22KIT COMPONENTS80X2580X25PART NUMBER ITEMDESCRIPTIONO-RINGPE80256ORINGOVERHAULPE80256PE15040ORING5207BEARING,OPEN,PFPE4 5208BEARING,OPEN,PFPE6207E BEARING,OPEN,PFPE4 6208BEARING,OPEN,PFPE300051GASKET,MOTOR SIGHT GLASS2 980348O'RING,VITON,100 X 4 MM11 923033O'RING,VITON,120 X 4 MM980334O'RING,VITON,130 X 3 MM22 980343O'RING,VITON,15 X 2.5 MM2222 980335O'RING,VITON,150 X 5.65 MM11 923028O'RING,VITON,175 X 4980336O'RING,VITON,185 X 5.7 MM11 980337O'RING,VITON,188.56 X 5.65 MM44 980338O'RING,VITON,195 X 5.65 MM923036O'RING,VITON,210 X 5.7 MM923069O'RING,VITON,22 X 1.5 MM22 980339O'RING,VITON,220 X 5.65 MM44 980340O'RING,VITON,230 X 5.65 MM923035O'RING,VITON,240 X 5.7 MM923034O'RING,VITON,260 X 5.7 MM980341O'RING,VITON,278 X 5.65 MM22 980344O'RING,VITON,28 X 2 MM44 900054O'RING,VITON,28 X 5MM11 980345O'RING,VITON,37.5 X 2 MM88 320119O'RING,VITON,39.5X3 MM22 900068O'RING,VITON,40 X 5MM22 989168O'RING,VITON,40 X 6.0 MM22 923031O'RING,VITON,42 X 2 MM40012O'RING,VITON,50.17 X 5.33 MM11 980333O'RING,VITON,85 X 3 MM88 320158O'RING,VITON,95 X 3 MM980058RING,PISTON16 P322891SIGHT GLASS,MODULE1 9819SIGHT GLASS,MOTOR,50X6MM,ROUND2****************************!INDIVIDUAL SPARESBEARINGS 16006 BEARING,OPEN,PFPE 330019 BEARING,SHIELDED,TEC 330020 BEARING,OPEN,PFPE 330021 BEARING,OPEN,PFPE 5205 BEARING,OPEN,PFPE 5207 BEARING,OPEN,PFPE 150X40,40X20,50X20,80X25,A10,A30,A705208 BEARING,OPEN,PFPE 6004 BEARING,SHIELDED,TEC,6004 6006 ORING BEARING,6006,TEC,W/ORINGS 6205 ORING BEARING,6205,TEC,W/ORINGS 6206 ORING BEARING,6206,TEC,W/ORINGS 6207E BEARING,OPEN,PFPE 150X40,40X20,50X20,80X25,A10,A30,A706208 BEARING,OPEN,PFPE6305ZZC3 BEARING,SHIELDED,TEC,6305 7204MS BEARING,MATCH SET (2),7204 7206AW BEARING,7206AW ,PFPE 7206MS BEARING,MATCH SET (2),7206 7206MSC3 B EARING,MATCH SET ,(2) 7206AW 7207AW BEARING,7207AW ,PFPE E 7207MSC3 BEARING,MATCH SET ,(2) 7207AW 7208MS BEARING,MATCH SET (2),7208 7306MS BEARING,MATCH SET (2),7306 GASKETS300051 GASKET ,MOTOR SIGHT GLASS A07V ,A10S,A25S,A30W ,A70W ,150X40,80X25,50X20,65X40,40X20300137 GASKET ,RING,VITON989336 GASKET ,LARGE INTERCOOLER HARDWARE420036 WASHER,WAVE,3 WAVE,SSR 420037 WASHER,WAVE,3 WAVE,SSR A 480003LW WASHER LOCK KM07 & BML07 480004 NUT ,LOCK,RIGHT HAND 480005 LOCKNUT ,RIGHT HAND,05 480005L LOCKNUT ,LEFT HAND,05 480005LW LOCKWASHER,05480006 LOCKNUT ,RIGHT HAND,06 AA70W 480006L LOCKNUT ,LEFT HAND,06AA70W 480006LW LOCKWASHER,06AA70W KITSEST101WN KIT ,PUMP&BOOSTER PE15040 KIT ,OVERHAUL PE15040ORING KIT ,O RINGPE15040U KIT ,OVERHAUL,INTERCOOLER PE40205 KIT ,OVERHAUL PE40205ORING KIT ,ORINGPE4020I KIT ,OVERHAUL,INTERCOOLER PE50206 KIT ,OVERHAUL PE50206ORING KIT ,O-RING EBARAPE5020I KIT ,OVERHAUL,INTERCOOLER PE6540 KIT ,OVERHAUL PE6540ORING KIT ,O RING,65X40 PE80256 KIT ,OVERHAUL PE80256ORING KIT ,ORINGPE8025I KIT ,OVERHAUL,INTERCOOLER,80X25 PEA07V KIT ,OVERHAUL INVENTORY IS LIMITED ON KITS & SPARES FOR EBARA PUMPS. PLEASE CHECK WITH CUSTOMER SERVICE FOR AVAILABILITY AND LEAD TIMES.NOTEINDIVIDUAL SPARESKITS (CONT.)PEAAS20N KIT,OVERHAULPEAAS300WN KIT,PUMP&BOOSTERPEESR200WN KIT,OVERHAUL,PUMP & BOOSTERMISC.290007 SENSOR,SWITCH,OIL LEVEL,EBARA350009 SPACER,ROTOR480007 LOCKNUT,RIGHT HAND,04LOCKNUT,LEFT HAND,04480007L480007LW LOCKWASHER,04O-RINGS314003 O’RING,VITON,28 X 5 MM314005 O’RING,VITON,42 X 5 MM320134 O’RING,VITON,120 X 4 MM320135 O’RING,VITON,15 X 2.5 MM320136 O’RING,VITON,15.6 X 2.4 MM320137 O’RING,VITON,17 X 2 MM320138 O’RING,VITON,162 X 5.6 MM320139 O’RING,VITON,168 X 3 MM320140 O’RING,VITON,171 X 5.6 MM320141 O’RING,VITON,176 X 3 MM320142 O’RING,VITON,192 X 5.6 MM320143 O’RING,VITON,210 X 5.6 MM320144 O’RING,VITON,212 X 5.6 MM320145 O’RING,VITON,219.3 X 5.7 MM320146 O’RING,VITON,233 X 5.7 MM320147 O’RING,VITON,240 X 5.7 MM320148 O’RING,VITON,25.12 X 1.78 MM320149 O’RING,VITON,28.3 X 1.78 MM EST101WN, AAS200WN, AA10, AA100WN, AA200, AA40W 320150 O’RING,VITON,30 X 1.78 MM320151 O’RING,VITON,31.47 X 1.78 MM320152 O’RING,VITON,50 X 3 MM320153 O’RING,VITON,56 X 3 MM320154 O’RING,VITON,60 X 3 MM320155 O’RING,VITON,65 X 3 MM320156 O’RING,VITON,71 X 3 MM320157 O’RING,VITON,75 X 3 MM320158 O’RING,VITON,95 X 3 MM320184 O’RING,VITON,278.77 X 5.33MM320233 O’RING,VITON,195 X 3 MM320234 O’RING,VITON,300 X 5.7 MM320239 O’RING,VITON,13.95X2.34MM320240 O’RING,VITON,15.54X2.34MM320242 O’RING,VITON,215.27X5.34MM320244 O’RING,VITON,227.97X5.42MM320246 O’RING,VITON,240.67X5.34MM320247 O’RING,VITON,26.65X2MM320248 O’RING,VITON,32.99X2MM320249 O’RING,VITON,34.43X3MM320251 O’RING,VITON,47.22X3MM320256 O’RING,VITON,136.12 X 3.53 MM320260 O’RING,VITON,249.3X5.7MM320261 O’RING,VITON,229.3X5.7MM320262 O’RING,VITON,239.3X5.7MM320263 O’RING,VITON,209.3X5.7MM320264 O’RING,VITON,219.3X5.7MMINDIVIDUAL SPARESO-RINGS (CONT.)923094 O’RING,VITON,219.1 X 5.5 MM980333 O’RING,VITON,85 X 3 MM 40X20,50X20,80X25,A10,A30,A70,80X40,40X25 980334 O’RING,VITON,130 X 3 MM 150X40,40X20,50X20,80X25,A07,A10,A30,A70,80X40 980335 O’RING,VITON,150 X 5.65 MM 50X20,80X25,A07,A30,A70,40X20,40X25 980336 O’RING,VITON,185 X 5.7 MM980337 O’RING,VITON,188.56 X 5.65 MM 40X20,50X20,80X25,A07,A10,A30,A70,80X40,40X25 980338 O’RING,VITON,195 X 5.65 MM 150X40,40X20,50X20,A10,A30,A70 980339 O’RING,VITON,220 X 5.65 MM 150X40,40X20,50X20,A07,A10,A70,A30 980340 O’RING,VITON,230 X 5.65 MM980341 O’RING,VITON,278 X 5.65 MM980342 O’RING,VITON,15 X 2.5 MM980343 O’RING,VITON,15 X 2.5 MM 150X40,40X20,50X20,80X25,A07,A10,A30,A70,80X40,4 980344 O’RING,VITON,28 X 2 MM 150X40,40X20,50X20,80X25,A07,A10,A30,A70,80X40,4 9803441 O’RING,BUNA,21 X 2 MM980345 O’RING,VITON,37.5 X 2 MM 40X20,50X20,80X25,A10,A30,A70,80X40,40X25 980346 O’RING,VITON,55 X 4 MM980347 O’RING,VITON,70 X 4 MM980348 O’RING,VITON,100 X 4 MM980349 O’RING,VITON,140 X 3.5 MM980350 ORING,VITON,65 X 3MM980351 O’RING,VITON,214.3 X 5.7MM980352 O’RING,VITON,157 X 5.8MM980353 O’RING,VITON,174.3 X 5.7MM981154 O’RING,VITON,80 X 3.0MM981338 O’RING,VITON,200 X 5.65 MM989168 O’RING,VITON,40 X 6.0 MM989169 O’RING,VITON,90 X 3RINGS350004 RING,PISTON,37MM ID350006 RING,PISTON,32MM ID350015 RING,PISTON350016 RING,PISTON350017 RING,PISTON350018 RING,PISTON929015 RING,PISTON950001 RING,PISTON980058 RING,PISTONSHIMS980033 SHIM,BRASS,14X7X0.01MM AA10,AA20,AA70W980041 SHIM,BRASS,32 X 25 X .1MM980042 SHIM,BRASS,37 X 30 X .05MMSIGHT GLASSES500016 SIGHT GLASS,OIL,PLASTIC500018 SIGHT GLASS,OIL,PLASTIC9819 SIGHT GLASS,MOTOR,50X6MM,ROUNDP322890 SIGHT GLASS,MODULEP322891 SIGHT GLASS,MODULE。