英文版销售合同书(合同范本)

销售合同英文范本6篇篇1SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is the owner of a certain quantity of goods described in this Contract and desires to sell and the Buyer agrees to buy the same on the terms and conditions stipulated below:1. PRODUCTS AND QUANTITYThe Seller agrees to sell and the Buyer agrees to purchase the following goods: [Specify the product name, model number, specifications, quantity, etc.] The total quantity to be sold and purchased shall be clearly stated in the invoice.2. PRICE AND PAYMENTThe price of the goods shall be as per the list attached to this Contract. The total amount payable by the Buyer to the Seller shall be [specify the total amount]. Payment terms are as follows: [Insert terms such as deposit payment prior to delivery, full payment upon delivery, etc.] All banking fees shall be borne by the party designated for payment.3. DELIVERY AND TIME OF DELIVERYThe Seller shall deliver the goods to the Buyer at the agreed place of delivery within [specify a reasonable time frame]. Any delay in delivery must be notified to the Buyer in writing. The risk of loss or damage to the goods shall pass to the Buyer upon delivery.4. QUALITY AND GUARANTEEThe Seller guarantees that the goods are new and of good quality, free from defects in material and workmanship, and comply with all applicable specifications and standards. The Seller shall replace any goods found defective within a reasonable period after delivery.5. PACKAGING AND MARKINGThe Seller shall pack the goods properly and ensure that they are clearly marked with necessary identification marks, labels, and other necessary information. The cost of packaging shall be borne by the Seller unless otherwise agreed by the Buyer.6. INSPECTION AND ACCEPTANCEThe Buyer has the right to inspect the goods during production and prior to delivery. Upon receipt of the goods, the Buyer shall have a reasonable period to inspect and accept or reject the goods in accordance with this Contract. Any rejected goods must be returned to the Seller at the Seller's cost and risk.7. FORCE MAJEURENeither party shall be liable for failure to perform any obligation under this Contract due to causes beyond their reasonable control, such as acts of war, riots, strikes, floods, fire, etc. However, the affected party shall notify the other party promptly in writing and provide evidence of such occurrence.8. CONFIDENTIALITY AND NON-DISCLOSUREBoth parties shall keep confidential all information related to this Contract that is not intended for public disclosure and shallnot disclose it to any third party without the prior written consent of the other party.9. TERMINATIONThis Contract may be terminated by either party in writing if there is a breach of any term or condition by the other party that cannot be rectified within a reasonable period of time. Termination shall not affect any obligation that has already been incurred by either party prior to termination.10. MISCELLANEOUSThe Buyer The Seller(Authorized Representative) (Authorized Representative)Date: Date:Signature: Signature:Company Name: Company Name:Address: Address:Telephone No.: Telephone No.:Email Address: Email Address: 邮件地址篇2SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is willing to sell the products listed in this Contract to the Buyer, and the Buyer is willing to purchase the same products under the terms and conditions stipulated below:1. Products and Specifications:The Seller agrees to sell and the Buyer agrees to purchase the products with the specifications listed in Annex A attached to this Contract.2. Quantity and Price:The Seller agrees to sell the products in the quantity specified in Annex A at the prices specified therein. The prices are fixed and firm for the duration of this Contract.3. Terms of Payment:Payment shall be made by the Buyer to the Seller as follows: __% (percentage) of the total contract value upon signing of this Contract; __% (percentage) upon delivery of the goods; and the balance upon receipt of the Seller's performance bond or other guarantee documents. All payments shall be made in the currency specified in Annex B.4. Delivery:The Seller shall deliver the products to the port specified in Annex C within the time agreed upon in this Contract. The Seller shall be responsible for arranging transportation of the goods and shall bear all expenses related to delivery.5. Quality Inspection and Warranty:The Seller guarantees that all products are new and of good quality, free from any defects, and comply with all applicable specifications and standards. The Seller shall provide necessary quality inspection certificates and other documents. The Buyer shall have the right to conduct its own quality inspections at the loading port.6. Packing and Marking:The Seller shall pack the products in a proper manner to ensure safe transportation to the port specified in Annex C. The packages shall be properly marked with contract number, product name, quantity, weight, and other necessary information.7. Risk and Insurance:Risk of loss or damage to the products shall pass to the Buyer upon delivery at the port specified in Annex C. The Seller shall arrange for insurance of the goods during transportation at its own cost. The insurance shall cover at least 110% of the total contract value against all risks commonly covered for such goods. The insurance certificate shall be handed over to the Buyer on delivery of the goods.8. Terms of Settlement for Disputes:篇3SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is willing to sell the products listed in this Contract to the Buyer, and the Buyer is willing to purchase the same products from the Seller,NOW THEREFORE, the parties hereby agree as follows:Article 1: Contract ProductThe product to be sold under this Contract is [describe the product in detail]. The specifications and quantity of the product are listed in the attached schedule.Article 2: Price and PaymentThe price of the product shall be as stated in the attached schedule. The payment shall be made through [specify payment method] within [specify time frame] after the date of delivery.Article 3: Delivery and ShippingThe Seller shall deliver the product to the Buyer at the shipping address specified by the Buyer. The delivery date shall be as stated in the attached schedule. Shipping and transportation risks shall be borne by [specify which party bears these risks].Article 4: Quality and InspectionThe Seller shall ensure that the product meets the quality standards specified in this Contract. The Buyer shall have the right to inspect the product during production and upon delivery. If any defects are found, the Seller shall promptly replace or repair the product.Article 5: ConfidentialityBoth parties shall keep confidential all information related to this Contract that is not intended for public disclosure. Neither party shall disclose such information to any third party without the prior written consent of the other party.Article 6: Force MajeureNeither party shall be liable for failure to perform its obligations under this Contract due to force majeure events, such as natural disasters, wars, riots, or government policies, provided that the affected party promptly notifies the other party of such events and takes reasonable measures to mitigate their effects.Article 7: Warranty and After-Sales ServiceThe Seller shall provide a warranty period of [specify duration] for the product. During this period, any defects in material or workmanship shall be repaired or replaced free ofcharge. The Seller shall also provide after-sales service as specified in the attached schedule.Article 8: TerminationThis Contract may be terminated by either party giving written notice to the other party in case of fundamental breach by either party. The party seeking termination shall give reasonable notice and provide evidence of such breach. The provisions of this Contract concerning confidentiality, warranty, and any obligations arising prior to termination shall survive termination.Article 9: Jurisdiction and LawThis Contract shall be governed by the laws of [specify country/jurisdiction]. Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit such disputes to [specify court/arbitration institution] for resolution.Article 10: MiscellaneousThis Contract constitutes the entire agreement between the parties for the sale of the product. No modification or amendment shall be binding unless made in writing and signedby both parties. This Contract is made in [specify language] only, and any translation provided for reference only.IN WITNESS WHEREOF, the parties have executed this Contract by their authorized representatives on the dates specified below.Buyer:(Authorized Representative)Date:Seller:(Authorized Representative)Date:[Note: This is a general sales contract template and may need to be modified to fit specific circumstances.]篇4SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is willing to sell the products listed in this Contract to the Buyer, and the Buyer is willing to purchase the same products from the Seller on the terms and conditions stipulated below:1. Products and Specifications:The Seller agrees to sell and the Buyer agrees to purchase the products with the following specifications: [specific details of the products to be sold, including name, model, quantity, quality, specifications, etc.].2. Price and Payment:The total contract price is [specify the total contract price]. The payment terms are as follows: [describe the payment terms, e.g., 30% advance payment, balance upon delivery, payment through bank transfer or other methods].3. Delivery:The Seller shall deliver the products to the Buyer at the following address: [delivery address]. The delivery date shall be [specify the delivery date]. Any delay in delivery shall be notified to the Buyer in advance.4. Quality Assurance:The Seller guarantees that the products are of good quality and comply with all applicable standards. The Seller shall be responsible for any defects in material or workmanship.5. Warranty:The Seller warrants that the products are new and not previously used. The Seller shall replace any defective products or make necessary repairs during the warranty period.6. Force Majeure:In case of force majeure events, such as natural disasters, war, political unrest, etc., which prevent or hinder the performance of this Contract, the Seller shall notify the Buyer immediately and seek to resolve the issue as soon as possible.7. Confidentiality:Both parties shall keep confidential all information related to this Contract, including product specifications, pricing, and business strategies.8. Termination:This Contract may be terminated by either party in case of breach of any term or condition by the other party. The partyseeking termination shall provide a written notice to the other party specifying the reasons for termination.9. Disputes:Any disputes arising out of or in connection with this Contract shall be settled through friendly consultation. If no settlement can be reached, either party may submit the dispute to [specify court/tribunal] for resolution.10. Miscellaneous:This Contract is made in duplicate originals, each party holding one original. This Contract shall be governed by and construed in accordance with the laws of [specifycountry/jurisdiction]. Any amendment or modification to this Contract shall be made in writing and signed by both parties. This Contract is effective from the date of signing by both parties.Buyer: _____________________Seller: _____________________Date: _____________________篇5SALES CONTRACT销售合同This Sales Contract is made by and between [买方名称], hereinafter referred to as "Buyer" and [卖方名称], hereinafter referred to as "Seller", whereby both parties agree as follows:一、商品条款Article 1: Commodity1. 商品名称：____________________（请填写商品名称）2. 商品规格：____________________（请填写商品规格）3. 单位价格：____________________（请填写单价）4. 总金额：（小写）____________________ （大写）____________________（人民币）二、价格与货币条款Article 2: Price and Terms of Payment1. 除非另有规定，“CIP价格”应包括卖方将货物交运至指定的目的地的所有成本与费用，包括运输成本及保险费。

销售合同英文版6篇篇1Sales ContractThis Sales Contract (the "Contract") is made and entered into on [date], by and between [Seller], with a principal place of business at [address] (the "Seller"), and [Buyer], with a principal place of business at [address] (the "Buyer").1. Sale of GoodsSeller agrees to sell, transfer, and deliver to Buyer, and Buyer agrees to purchase from Seller, the goods described in Exhibit A (the "Goods").2. Purchase PriceThe purchase price for the Goods shall be [amount] (the "Purchase Price"). Buyer agrees to pay the Purchase Price to Seller in full upon delivery of the Goods.3. DeliverySeller shall deliver the Goods to Buyer at [delivery location] on or before [delivery date]. Any delay in delivery shall entitle Buyer to cancel this Contract.4. Inspection and AcceptanceBuyer shall inspect the Goods promptly upon delivery. Buyer may reject any Goods that are damaged, defective, or not in conformity with the specifications set forth in Exhibit A. Any rejected Goods shall be returned to Seller at Seller's expense.5. Payment TermsBuyer shall pay the Purchase Price to Seller by [payment method] within [number] days of delivery of the Goods. Late payments shall accrue interest at a rate of [percentage] per month.6. WarrantiesSeller warrants that the Goods shall conform to the specifications set forth in Exhibit A and shall be free from defects in materials and workmanship. Seller further warrants that the Goods are free and clear of any liens or encumbrances.7. Limitation of LiabilityIn no event shall either party be liable to the other for any indirect, incidental, special, or consequential damages arising out of or in connection with this Contract, even if such party has been advised of the possibility of such damages.8. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [State].9. Entire AgreementThis Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the Goods and supersedes all prior agreements, understandings, and negotiations, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller:Buyer:[Signatures]EXHIBIT A[Description of Goods]This Sales Contract is hereby accepted by both parties:Seller: Buyer:[Signatures] [Signatures]篇2Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is agreed upon between [Seller Company Name], with its registered office located at [Address], and [Buyer Company Name], with its registered office located at [Address], on [Date].1. Sale of Goods: The Seller agrees to sell and the Buyer agrees to purchase the following goods: [Description of goods, quantity, quality, and price].2. Payment: The Buyer agrees to pay the Seller the total sum of [Total amount] for the goods as specified in Clause 1. Payment shall be made in [Currency] within [Number of days] days from the date of delivery.3. Delivery: The Seller shall deliver the goods to the Buyer's address as specified in this Contract, within [Number of days] days from the date of signing this Contract unless otherwise agreed upon by both parties.4. Inspection and Acceptance: The Buyer shall inspect the goods upon delivery and shall have [Number of days] days to notify the Seller of any defects or non-conformities. Failure to do so will be deemed as acceptance of the goods.5. Warranties: The Seller warrants that the goods are free from defects in materials and workmanship and are fit for the purpose for which they are intended. The Seller shall remedy any defects or non-conformities at its own expense.6. Indemnity: The Seller shall indemnify and hold harmless the Buyer from any claims, damages, or liabilities arising out of the Seller's breach of this Contract.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Country/State].8. Dispute Resolution: Any disputes arising out of this Contract shall be resolved through arbitration in [City], in accordance with the rules of the [Arbitration Board].9. Confidentiality: Both parties agree to maintain the confidentiality of all information exchanged in connection with this Contract.10. Entire Agreement: This Contract constitutes the entire agreement between the parties and supersedes any prior agreements or understandings.In witness whereof, the parties hereto have executed this Contract as of the date first above written.[Seller Company Name] [Buyer Company Name]By: __________________________ By: __________________________Name: Name:Title: Title:Date: Date:篇3Sales ContractThis Sales Contract (“Contract”) is made and entered into this [date], by and between [Seller name], with its principal place of business at [Seller address] (“Seller”) and [Buyer name], with its principal place of business at [Buyer address] (“Buyer”).WHEREAS, Seller desires to sell and Buyer desires to purchase certain goods on the terms and conditions set forth in this Contract;NOW, THEREFORE, in consideration of the mutual covenants and promises made by the parties hereto, the Seller and Buyer agree as follows:1. Goods: Seller agrees to sell and Buyer agrees to purchase the following goods (the “Goods”):[List of Goods]2. Quantity: The quantity of Goods to be sold and purchased under this Contract shall be as set forth in the Purchase Order agreed upon by the parties.3. Price: The purchase price for the Goods shall be [Price] per unit, for a total purchase price of [Total Price]. Payment shall be made in full upon delivery of the Goods.4. Delivery: The Goods shall be delivered by Seller to Buyer at the following address: [Delivery Address]. Delivery shall be completed on or before the agreed upon delivery date specified in the Purchase Order.5. Inspection and Acceptance: Buyer shall have [number] days after delivery of the Goods to inspect and test the Goods. IfBuyer determines that the Goods are not in conformity with the specifications set forth in this Contract, Buyer shall notify Seller in writing within such [number] day period, and Seller shall be responsible for replacing or repairing the Goods at Seller’s expense.6. Risk of Loss: The risk of loss of the Goods shall pass from Seller to Buyer upon delivery of the Goods to Buyer at the delivery address specified in this Contract.7. Warranties: Seller warrants that the Goods will conform to the specifications set forth in this Contract and will be free from defects in material and workmanship for a period of [number] days from the date of delivery. Seller’s sole liability and Buyer’s exclusive remedy for breach of this warranty shall be the replacement or repair of the defective Goods.8. Limitation of Liability: In no event shall either party be liable for any consequential, incidental, special or punitive damages, including lost profits, arising out of or related to this Contract.9. Governing Law: This Contract shall be governed by and construed in accordance with the laws of the state of [state].10. Entire Agreement: This Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the Goods and supersedes all prior agreements and understandings, whether written or oral, relating to such subject matter.IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed by their respective authorized representatives as of the day and year first above written.SELLER: BUYER:________________________ _______________________[Seller Name] [Buyer Name]By: By:Name: Name:Title: Title:篇4Sales ContractThis Sales Contract ("Contract") is entered into on [Date] between [Seller], a company organized and existing under thelaws of [Country], having its principal place of business at [Address], and [Buyer], a company organized and existing under the laws of [Country], having its principal place of business at [Address].1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the goods described in Exhibit A attached hereto (the "Goods").2. Purchase Price: The purchase price for the Goods shall be [Amount] per unit. Buyer shall pay the total purchase price to Seller in accordance with the payment terms set forth in Exhibit B attached hereto.3. Delivery: Seller shall deliver the Goods to Buyer at the location specified in Exhibit A within [Number] days after the date of this Contract. Buyer shall be responsible for all shipping and handling costs related to the delivery of the Goods.4. Inspection and Acceptance: Buyer shall inspect the Goods upon delivery and shall notify Seller of any defects ornon-conformities within [Number] days of delivery. Buyer's failure to notify Seller within the specified time period shall be deemed acceptance of the Goods.5. Warranties: Seller warrants that the Goods shall be free from defects in material and workmanship for a period of [Number] days from the date of delivery. Seller's sole liability under this warranty shall be to repair or replace any defective Goods.6. Limitation of Liability: Seller shall not be liable for any incidental, consequential, or punitive damages arising out of or related to this Contract, whether in contract, tort, or otherwise.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Country]. Any disputes arising out of or related to this Contract shall be resolved by arbitration in accordance with the rules of [Arbitration Association].[Remainder of page intentionally left blank; signature page follows.]IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller: Buyer:__________________________ _________________________[Signature] [Signature][Name] [Name][Title] [Title]篇5Sales ContractThis Sales Contract ("Contract") is made and entered into as of [Date] by and between [Seller Name], with a mailing address of [Seller Address] ("Seller"), and [Buyer Name], with a mailing address of [Buyer Address] ("Buyer").1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the following goods (the “Goods”): [Description of Goods].2. Purchase Price: The total purchase price for the Goods shall be [Purchase Price], which shall be paid in the following manner: [Payment Terms].3. Delivery: Seller agrees to deliver the Goods to Buyer’s address at [Buyer Address] within [Delivery Timeframe]. Time is of the essence with respect to delivery.4. Inspection and Acceptance: Buyer shall have [Inspection Period] days from the delivery of the Goods to inspect and accept or reject the Goods. If Buyer rejects the Goods, Buyer shallpromptly notify Seller in writing with an explanation of the reasons for rejection.5. Warranty: Seller warrants that the Goods will be free from defects in materials and workmanship for a period of [Warranty Period] days from the date of delivery. If the Goods are defective, Seller shall replace or repair the Goods at no additional cost to Buyer.6. Limitation of Liability: Seller’s liability und er this Contract shall be limited to the purchase price paid by Buyer for the Goods.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of the State of [State].8. Entire Agreement: This Contract constitutes the entire agreement between the parties with respect to the sale of the Goods and supersedes all prior agreements, understandings, and negotiations, whether written or oral, between the parties.In witness whereof, the parties hereto have executed this Contract as of the date first above written.[Seller Name] [Buyer Name]____________________ ____________________Seller BuyerDate: ___________________ Date: ___________________This Sales Contract is effective as of the date first written above.篇6Sales ContractThis Sales Contract is entered into on [date] by and between [Seller], a company organized and existing under the laws of [country], with its principal place of business at [address], and [Buyer], a company organized and existing under the laws of [country], with its principal place of business at [address].1. Sale of GoodsSeller agrees to sell and deliver to Buyer, and Buyer agrees to purchase from Seller, the following goods (the "Goods"):Description: [Description of Goods]Quantity: [Quantity of Goods]Unit Price: [Price per unit]Total Price: [Total price of Goods]2. DeliverySeller shall deliver the Goods to Buyer at the address specified by Buyer on or before [delivery date]. Delivery shall be made by [mode of transportation]. Buyer shall be responsible for any shipping and handling costs associated with the delivery of the Goods.3. PaymentBuyer shall pay Seller the total price of the Goods upon delivery. Payment shall be made in [currency] by [method of payment].4. Inspection and AcceptanceBuyer shall inspect the Goods upon delivery and shall have [number] days to notify Seller of any defects or non-conformities. If Buyer fails to notify Seller within the specified period, Buyer shall be deemed to have accepted the Goods.5. WarrantiesSeller warrants that the Goods shall conform to the description provided and shall be free from defects in material and workmanship. Buyer's sole remedy for breach of this warranty shall be the replacement or repair of the defective Goods.6. Limitation of LiabilitySeller shall not be liable for any indirect, incidental, consequential, or special damages arising out of or in connection with the sale or use of the Goods.7. Governing LawThis Sales Contract shall be governed by and construed in accordance with the laws of [country]. Any disputes arising under this Contract shall be resolved through arbitration in [city], in accordance with the rules of [arbitration organization].8. Entire AgreementThis Sales Contract constitutes the entire agreement between Seller and Buyer with respect to the sale of the Goods and supersedes all prior agreements and understandings, whether oral or written.IN WITNESS WHEREOF, the parties hereto have executed this Sales Contract as of the date first above written.[Seller]By:_________________________Name:_______________________Title:_______________________[Buyer]By:_________________________ Name:_______________________ Title:_______________________。

外贸销售合同样本中英文5篇篇1合同编号：XXXXXXXXXX甲方（买方）：____________________乙方（卖方）：____________________鉴于甲、乙双方本着平等互利、合作共赢的原则，经友好协商，就甲方向乙方购买商品事宜，达成如下协议：一、商品名称、规格型号、数量及价格（中英文对照）商品名称：____________________规格型号：____________________数量：____________________单价：____________________总价：____________________二、付款方式及期限（Payment Term）1. 付款方式和比例：双方约定采用电汇（T/T）方式支付货款，付款比例为_____%。

2. 付款期限：甲方在收到货物并确认质量合格后_____天内完成付款。

三、交货时间与方式（Time and Mode of Delivery）1. 交货时间：乙方需在合同签署后_____天内完成交货。

2. 交货方式：采用国际空运方式，乙方负责安排运输并确保货物按时到达甲方指定地点。

四、质量保证与售后（Quality Assurance and After-sales Service）1. 乙方应保证所销售的商品质量符合相关标准和甲方的要求。

2. 若甲方发现商品存在质量问题，应及时通知乙方，乙方应负责退换货或提供维修服务。

3. 乙方需提供必要的售后支持和技术指导。

五、知识产权与保密条款（Intellectual Property and Confidentiality）1. 双方应尊重彼此的知识产权，未经对方许可，不得擅自使用对方的商标、专利等知识产权。

2. 双方在合作过程中所知悉的商业秘密和技术秘密，应予以保密，未经对方同意，不得泄露给第三方。

六、违约责任（Liability for Breach of Contract）1. 若一方未按照合同约定履行义务，应承担违约责任，并赔偿因此给对方造成的损失。

中英文外贸销售合同范本3篇篇1Export Sales ContractThis Export Sales Contract is entered into on [Date] between [Exporter Company], a company registered in [Country] with registered address at [Address] (hereinafter referred to as the "Exporter"), and [Importer Company], a company registered in [Country] with registered address at [Address] (hereinafter referred to as the "Importer").1. Product Description: The Exporter agrees to sell and the Importer agrees to purchase the following products:- Product Name: [Product Name]- Description: [Description]- Quantity: [Quantity]- Price: [Price]- Delivery Date: [Delivery Date]- Payment Terms: [Payment Terms]2. Delivery Terms: The Exporter shall deliver the products to the Importer at the designated location [Address] on the agreed delivery date. The Importer shall be responsible for any additional costs associated with the delivery of the products.3. Payment Terms: The Importer shall make payment to the Exporter in the following manner:- Payment Method: [Payment Method]- Payment Currency: [Currency]- Payment Schedule: [Schedule]- Payment Amount: [Amount]4. Inspection and Acceptance: The Importer shall have the right to inspect the products upon delivery and shall notify the Exporter of any defects or discrepancies within [Number] days of delivery. The Exporter shall remedy any defects or discrepancies within a reasonable time frame.5. Non-Disclosure: Both parties agree to keep confidential any information disclosed as a result of this agreement, including but not limited to pricing, product specifications, and business operations.6. Governing Law: This agreement shall be governed by and construed in accordance with the laws of [Country]. Any disputes arising from this agreement shall be settled through arbitration in [City, Country].7. Termination: Either party may terminate this agreement with written notice to the other party in the event of a breach of contract, failure to make payment, or insolvency.This Export Sales Contract constitutes the entire agreement between the Exporter and Importer. Any modifications to this agreement must be made in writing and signed by both parties.In witness whereof, the parties hereto have executed this Export Sales Contract as of the date first above written.Exporter Company:__________________________[Signature]Importer Company:__________________________[Signature]篇2International Sales ContractThis International Sales Contract (the "Contract") is made and entered into as of [Date], by and between [Seller], a company organized and existing under the laws of [Country], with its principal place of business located at [Address] (hereinafter referred to as the "Seller"), and [Buyer], a company organized and existing under laws of [Country], with its principal place of business located at [Address] (hereinafter referred to as the "Buyer").1. Subject of the Contract:The Seller agrees to sell and deliver the goods specified in Exhibit A attached hereto to the Buyer, and the Buyer agrees to purchase and accept the goods, under the terms and conditions set forth herein.2. Quantity and Description of Goods:The goods to be sold shall be as described in Exhibit A, including quantity, quality, and specifications.3. Price and Payment:The price of the goods shall be [Price] per unit, as specified in Exhibit A. Payment shall be made by [Payment Terms], as specified in Exhibit B. Payment shall be made in [Currency]. Anytaxes or other charges applicable to the sale of the goods shall be the responsibility of the Buyer.4. Delivery:The Seller shall deliver the goods to the Buyer at the location specified in Exhibit A. The delivery date shall be as specified in Exhibit A. The Seller shall be responsible for the cost of packaging, handling, and transportation of the goods to the Buyer.5. Inspection and Acceptance:The Buyer shall have the right to inspect the goods upon delivery. If the goods do not conform to the specifications set forth in Exhibit A, the Buyer shall notify the Seller in writing within [Number] days of delivery. The Seller shall replace any non-conforming goods at its own expense.6. Force Majeure:Neither party shall be liable for any delay or failure to perform its obligations under this Contract if such delay or failure is due to a force majeure event, including but not limited to acts of nature, war, terrorism, or government actions.7. Governing Law:This Contract shall be governed by and construed in accordance with the laws of [Country]. Any disputes arising out of this Contract shall be resolved through arbitration in [City], in accordance with the rules of the International Chamber of Commerce.IN WITNESS WHEREOF, the Parties hereto have caused this Contract to be executed by their duly authorized representatives as of the date first above written.[Signature of Seller] [Signature of Buyer][Name and Title of Seller] [Name and Title of Buyer]篇3International Sales ContractThis International Sales Contract (the "Contract") is entered into on this [Date] by and between [Seller Name], a company organized and existing under the laws of [Country], with its principal place of business at [Address] (the "Seller"), and [Buyer Name], a company organized and existing under the laws of [Country], with its principal place of business at [Address] (the "Buyer").1. Subject of the Contract1.1 The Seller agrees to sell, transfer, and deliver to the Buyer the products as described in Exhibit A attached hereto (the "Products").1.2 The Buyer agrees to purchase and accept delivery of the Products specified in Exhibit A according to the terms and conditions set forth in this Contract.2. Price and Payment Terms2.1 The total purchase price for the Products shall be [Amount], payable by the Buyer to the Seller in the following manner: [Payment Terms].2.2 Payment shall be made in [Currency] and by [Payment Method] within [Number] days from the date of delivery.2.3 In case of late payment, the Buyer shall pay an interest rate of [Interest Rate]% per month until the outstanding amount is fully paid.3. Delivery3.1 The Seller shall deliver the Products to the Buyer's address as specified in Exhibit A within [Number] days from the date of this Contract.3.2 The Buyer shall be responsible for any costs related to customs duties, taxes, and transportation of the Products to their final destination.4. Inspection and Acceptance4.1 Upon delivery, the Buyer shall inspect the Products for any damage, defects, or non-conformity.4.2 The Buyer shall notify the Seller in writing of anynon-conformity within [Number] days from the date of delivery.4.3 If the Products are found to be non-conforming, the Seller shall replace the defective Products at no additional cost to the Buyer.5. Guarantee and Warranty5.1 The Seller guarantees that the Products shall be free from defects in material and workmanship for a period of [Number] days from the date of delivery.5.2 If any defect is discovered during the warranty period, the Seller shall repair or replace the defective Products at no additional cost to the Buyer.6. Governing Law and Disputes6.1 This Contract shall be governed by and construed in accordance with the laws of [Country].6.2 Any disputes arising out of or relating to this Contract shall be settled through amicable negotiations between the parties.6.3 If the parties fail to resolve the dispute amicably, it shall be settled by arbitration in [City], [Country] in accordance with the rules of [Arbitration Commission].IN WITNESS WHEREOF, the parties hereto have duly executed this Contract as of the date first above written.SELLER: [Seller Name]BUYER: [Buyer Name]Exhibit A: List of Products[Product Description, Quantity, Price]。

销售合同英文版8篇篇1SALES CONTRACTThis Sales Contract (hereinafter called "the Contract") is made and entered into by and between the Seller and the Buyer:Seller:Buyer:in accordance with the principles of mutual respect, equality, and mutual benefit and in consideration of the strength of their respective business capabilities, they agree to conclude this Contract under the following terms and conditions:Article 1: Scope of ContractThis Contract covers the sale of the following commodity: ___________. Any amendment or cancellation of this Contract requires the written consent of both parties.Article 2: Price and Payment TermsThe total price for the contracted goods shall be US$___. The payment terms are as follows: _____.The Seller shall provide a valid VAT invoice upon delivery of the goods.Article 3: DeliveryThe Seller shall deliver the goods within ____ days from the date of signing this Contract. Any delay shall be promptly notified to the Buyer and discussed mutually for a reasonable adjustment.Article 4: Quality Inspection and StandardThe Seller shall ensure that the quality of the goods conforms to the standards specified in this Contract. The Buyer shall have the right to conduct inspection at the Seller's factory before shipment.Article 5: PackagingThe Seller shall use proper packaging materials to ensure safe delivery of the goods to the port specified by the Buyer. All expenses related to packaging shall be borne by the Seller.Article 6: Risk TransferRisk shall be transferred to the Buyer upon delivery of the goods at the port specified in this Contract.Article 7: InsuranceThe Seller shall cover insurance for the goods during transit from their factory to the port specified in this Contract at their own cost.Article 8: Force MajeureNeither party shall be liable for any failure to perform its obligations under this Contract due to force majeure events such as natural disasters, war, government intervention, etc., but shall immediately notify the other party of such events and their consequences.Article 9: ConfidentialityBoth parties shall keep confidential all information related to this Contract that is not meant for public disclosure.Article 10: Warranty and After-Sales ServiceThe Seller shall provide a warranty period of ____ days from the date of delivery for any defects in material or workmanship found in the goods. The Seller shall also provide necessary after-sales service as per Buyer's request during this period.Article 11: Settlement of DisputesArticle 12: Language and LawsThis Contract is executed in both English and ____ languages with equal legal effects. The laws of ____ shall apply to this Contract.In case of any discrepancies between English version and other language version, English version shall prevail for both parties' performance and settlement disputes if any deviation between both versions occurs in relation to contract execution matters.Date: ________Authorized Representative of Seller: _____________________ (Signature)Authorized Representative of Buyer: _____________________ (Signature)Seller's Name (Stamp): _____________________Buyer's Name (Stamp): _____________________篇2SALES CONTRACT1. Scope of ContractThe Seller agrees to sell and the Buyer agrees to purchase the following goods: [Description of goods, quantity, specifications, etc.] in accordance with the terms and conditions stipulated below.2. Price and Payment2.1 The Price of the goods is fixed at [Price].2.2 Payment shall be made by the Buyer to the Seller in the following terms:a) A deposit of [Percentage]% of the total contract value shall be paid within [Time frame] after the signing of the contract.b) The balance of [Percentage]% shall be paid against the copy of the shipping documents and the commercial invoice within [Time frame] after the receipt of the goods at the port of destination.3. Delivery and Shipment3.1 The Seller shall deliver the goods within [Delivery timeframe].3.2 The Seller shall advise the Buyer of the shipment date and air waybill number at least [Number of days] days prior to shipment.3.3 Delay in delivery beyond the agreed period shall be subject to penalties, with each week's delay resulting in a penalty equal to [Percentage]% of the total contract value for each week of delay.4. Quality and Inspection4.1 The Seller shall ensure that the goods are new, sound, and meet all specifications stated in this contract.4.2 The Buyer shall have the right to conduct a pre-shipment inspection at the Seller's premises or at a mutually agreed location prior to shipment.4.3 If any discrepancies are found during inspection, the Seller shall be responsible for rectifying such discrepancies at no additional cost to the Buyer.5. Risk and Title TransferRisk and title for the goods shall pass to the Buyer upon delivery to the carrier at the point of shipment as evidenced by the shipping documents provided by the Seller to the Buyer.6. Force Majeure7. Warranty and After-Sales Service8. Settlement of Disputes篇3SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made and entered into on [Date], by and between [Seller's Full Name] (hereinafter referred to as the "Seller"), and [Buyer's Full Name] (hereinafter referred to as the "Buyer").1. Scope of ContractThe Seller agrees to sell and the Buyer agrees to purchase the under mentioned commodity strictly according to the terms and conditions set out in this Contract.2. Commodity and QuantityThe Seller agrees to sell and the Buyer agrees to purchase the following commodity:[Description of the commodity, specifications, quality, quantity, etc.]3. Price and Paymenta. The Price of the commodity shall be fixed as stated in the contract.b. Payment terms: [Terms of payment, e.g., T/T (Telegraphic Transfer), L/C (Letter of Credit), etc.]c. The Buyer shall make payment within [Time limit for payment].d. In case of any discrepancies in quality or quantity, the Seller shall make corresponding deductions from the invoice value.e. All banking charges shall be borne by the Buyer unless otherwise agreed upon by both parties.4. Delivery and Shipmenta. The Seller shall deliver the goods within [Delivery period].b. The Seller shall advise the Buyer of the estimated date of shipment and delivery time of the goods by [Method of notification].c. The Seller shall be responsible for loading and shipping according to the terms agreed in this Contract.d. If there is any delay in shipment due to reasons on the Seller's side, the Seller shall bear all losses incurred to the Buyer thereby.e. The risk of loss or damage to the goods shall pass to the Buyer upon delivery of the goods to the carrier at the port of shipment as stipulated in this Contract.f. The Seller shall provide necessary documents for customs clearance at destination port as required by international trade practices or requested by the Buyer.g. The Seller shall ensure that all necessary customs formalities are completed before shipment is made so that risks incurred are covered under Insurance as specified in Article XX.篇4SALES CONTRACTThis Sales Contract (hereinafter called "the Contract") is made on [Date] between [Seller Full Name] (hereinafter called "the Seller") and [Buyer Full Name] (hereinafter called "the Buyer").1. Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the under-mentioned commodity strictly according to the terms and conditions stipulated below:Commodity: ________________Specification: ________________Quantity: ________________Price: ________________2. Terms of Delivery3. Terms of PaymentPayment shall be made by the Buyer to the Seller against the following terms:a) ____% (percentage) of the total contract value to be paid within ________ (number of days) after signing this Contract.b) ____% (percentage) of the total contract value to be paid against presentation of shipping documents, i.e., bill of lading, invoice, certificate of quality and quantity, etc., by ________ (payment date).c) The balance of payment will be made in ________ (payment terms) after arrival of goods at the port of destination and issuance of Final Inspection Certificate by the Buyer. Any delay in payment will be charged at a rate of __% per month from the due date until receipt of full payment.4. Quality & Inspection5. Force Majeure6. Warranty & Liabilities7. Disputes Settlement8. General Terms篇5SALES CONTRACTThis Sales Contract (hereinafter called the "Contract") is made on [date] by and between [Seller's Name] (hereinafter called "Seller"), and [Buyer's Name] (hereinafter called "Buyer").1. Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the following commodity: [Detail of the product to be sold]. The quantity, specifications, and layout shall be set out in Annex I to this Contract.2. Price and Payment2.1 The Price of the commodity is fixed at ________ (currency and amount). The Seller shall quote a CIF basis to be stipulated in the order acknowledgement which will constitute an integral part of this Contract.3. Delivery and Shipment4. Insurance篇6SALES CONTRACT1. Product DescriptionThe Seller agrees to sell and the Buyer agrees to purchase the following products: [Product Description, including item number, name, specifications, quantity, etc.]2. Price and Payment2.1 The total sales price for the products shall be [Price Amount] US dollars (USD) ONLY.2.2 Payment shall be made by [Payment Method] only. The Buyer shall make full payment within [Payment Deadline]. The Seller shall provide a valid invoice for the products.3. Delivery and Shipment3.1 Delivery shall be made by [Delivery Method] to the Buyer's designated port/location within [Delivery Timeframe].3.2 The Seller shall notify the Buyer of the estimated delivery date in writing prior to shipment. The risk of loss or damage to the products shall pass to the Buyer upon delivery at theport/location specified by the Buyer.4. Quality Assurance5. Warranty and After-Sales Service6. Intellectual Property Rights7. Confidentiality8. Force Majeure9. Termination10. General Provisions10.1 This Contract constitutes the entire agreement between the parties and no modifications shall be made unless agreed upon by both parties in writing.Any prior agreements or understandings between the parties are hereby cancelled and replaced with this Contract.篇7SALES CONTRACT1. Scope of Supply1.1 The Seller agrees to sell and the Buyer agrees to purchase the products listed in Annex A attached to this Contract. The specific terms related to such products, including quantity, specifications, quality, and pricing, are detailed in Annex A.2. Delivery2.1 The Seller shall ensure timely delivery of the products to the Buyer at the place specified in Annex A.2.2 Any delay in delivery shall be promptly notified to the Buyer and any associated penalties shall be as per the terms stated in this Contract.3. Payment3.1 The Buyer shall make payment for the products as per the payment terms outlined in Annex B attached to this Contract.3.2 In case of any delay in payment, the Buyer shall inform the Seller promptly and pay applicable penalties as per the terms stated in this Contract.4. Quality Assurance4.1 The Seller guarantees that the products shall be of the quality, specifications, and standards agreed upon and as per the applicable laws and regulations.4.2 If any defect or discrepancy is found in the products, the Seller shall promptly replace or rectify such products as per the terms and conditions agreed upon by both parties.5. Warranty and Liability5.1 The Seller provides a warranty for the products as specified in Annex C attached to this Contract.5.2 In case of any breach of contract by the Seller, he shall be liable for any losses incurred by the Buyer as a result of such breach.6. Confidentiality6.1 Both parties shall maintain confidentiality of all information related to this Contract that is not intended for public disclosure.7. Force Majeure7.1 In case of any event beyond the reasonable control of either party, such as acts of war, terrorism, natural disasters, etc., both parties shall negotiate and agree on an appropriate course of action.8. Termination8.1 This Contract may be terminated by either party giving a written notice to the other party in case of any material breach of contract by the other party.9. General Terms9.1 This Contract constitutes the entire agreement between the parties and no modification shall be made to it except in writing and signed by both parties.9.2 This Contract is made in duplicate, with each party holding one copy, and is executed in the English language. In case of any discrepancies between the meanings of the original language and any translated version, the original language shall prevail.9.3 Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiations between both parties. If no settlement can be reached, such disputes shall be finally settled under [Name of applicable law/jurisdiction].In witness whereof, the parties have executed this Contract on the dates indicated below:Seller: _________________________ Date: _____________Signature: _________________________Title: _________________________Company Seal (if applicable): _________________________Contact Information: _________________________Email: _________________________ Phone: _____________Address: _________________________City/State/Zip Code: _____________Country: _____________篇8SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made and entered into on [Date], by and between [Seller's Full Name] (hereinafter referred to as the "Seller"), and [Buyer's Full Name] (hereinafter referred to as the "Buyer").1. Scope of ContractThe Seller agrees to sell and the Buyer agrees to purchase the under mentioned commodity strictly according to the terms and conditions mentioned below.2. Description of the GoodsThe Seller shall sell and the Buyer shall purchase the following goods: [Description of the goods, including model number, specifications, quantity, etc.]3. Price and Payment3.1 Price: The total price for the goods shall be [Total Price] USD, NET. All costs related to packing, shipping, insurance, customs duties, taxes, etc., shall be borne by the Buyer unless otherwise agreed in writing by the Seller.3.2 Payment: The Buyer shall make payment through [Payment method specified, e.g., T/T transfer, L/C, etc.] The details of payment schedule are as follows:* A deposit of [Percentage] upon signing of this Contract.* The balance before shipment against confirmed documents.4. DeliveryThe Seller shall deliver the goods within [Delivery period specified] after receiving the full payment. Any delay in delivery caused by reasons beyond the Seller's control shall be notified to the Buyer in writing immediately upon occurrence.5. Quality and Inspection5.1 Quality: The Seller guarantees that the goods shall be in conformity with the quality specified in this Contract. The Buyershall have the right to inspect the goods during production or before shipment.6. Packing and Shipping Marks7. Risk and Insurance8. Claims9. Force Majeure10. Settlement of DisputesAll notices under this Contract shall be given in writing addressed to both parties。

英文版销售合同范本8篇篇1SALES CONTRACTThis Sales Contract is made on [Date], between [Seller Name], a company duly organized and operating under the laws of [Seller Country], hereinafter referred to as "Seller" and [Buyer Name], a company duly organized and operating under the laws of [Buyer Country], hereinafter referred to as "Buyer".1. Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the products listed in Annex A, attached hereto, which shall be a part of this Contract. The specifications, quality, quantity, and other related details of the products are specified in Annex A.2. Price and Payment2.1 The total price for the products listed in Annex A shall be [Total Price] USD, which shall be paid by the Buyer to the Seller.2.2 Payment shall be made in USD via the method agreed by both parties, either wire transfer or other agreed means.2.3 The Buyer shall make the payment within [Payment Days] days from the date of signing this Contract.3. Delivery and Shipping3.1 The Seller shall deliver the products to the shipping port specified by the Buyer within [Delivery Days] days from the date of signing this Contract.3.2 Shipping costs shall be borne by the Buyer unless otherwise agreed by both parties.4. Quality AssuranceThe Seller guarantees that all products are in conformity with the specifications mentioned in Annex A and comply with international quality standards. The Seller shall provide necessary quality documents and certificates to the Buyer upon request.5. Warranty and售后支持The Seller shall provide a warranty period of [Warranty Period] months from the date of delivery for any defects in material or workmanship found in the products. During this period, the Seller shall replace or repair any defective products atits own cost. After the warranty period, the Seller shall provide technical support and maintenance services upon request.6. Contract Modification and Termination6.1 This Contract may be modified only by a written agreement signed by both parties.6.2 In case of any breach of Contract by either party, the other party may terminate this Contract with immediate effect upon notice to the default party.7. Law and JurisdictionThis Contract shall be governed by and construed in accordance with the laws of [Country]. Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit such disputes to the courts located in [Country/City].8. Miscellaneous8.1 All communications and notices related to this Contract shall be made in English.8.2 This Contract constitutes the entire understanding between the Seller and the Buyer, and no modification oramendment shall be made to this Contract except in writing and signed by both parties.8.3 This Contract is in duplicate, with each party holding one original copy. Each copy is equally valid and shall be binding on both parties.In conclusion, upon signing this Contract, both parties agree to its terms and conditions, and are fully bound by its provisions.Seller:Name: ________________________Address: ________________________Date: ________________Signature: ________________________Buyer:Name: ________________________Address: ________________________Date: ________________Signature: ________________________ANNEX A - PRODUCT LIST AND SPECIFICATIONS (To be attached separately)Please note that this Sales Contract template is for reference purposes only and may need to be customized based on specific business requirements and legal considerations. It is advisable to have a professional legal advisor review any contract before its execution.篇2Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], a legal entity registered in [Seller's Country], with its registered office at [Seller's Address] (hereinafter referred to as "Seller"), and [Buyer's Name], a legal entity registered in [Buyer's Country], with its registered office at [Buyer's Address] (hereinafter referred to as "Buyer").Preamble:The Seller and the Buyer, through mutual understanding and negotiation, agree to conclude this contract for the sale ofproducts mentioned below. Both parties have verified the authenticity, legality, and conformity of the products, terms, conditions, and documents attached to this contract.Article 1: Contract Scope1.1 The Seller agrees to sell and the Buyer agrees to purchase the products listed in Annex A, which forms an integral part of this contract.1.2 The items, specifications, quantity, and unit prices of the products shall be as stated in Annex A.Article 2: Terms of Payment2.1 The payment terms shall be as agreed upon by both parties and stated in Annex B, which forms an integral part of this contract.2.2 Any changes to the payment terms must be agreed upon by both parties in writing.Article 3: Delivery and Inspection3.1 The Seller shall ensure timely delivery of the products in accordance with the terms agreed upon by both parties.3.2 The Buyer shall inspect the products immediately upon receipt and notify the Seller of any discrepancies within a reasonable period of time.Article 4: Warranty and Liability4.1 The Seller guarantees that the products are free from defects in material and workmanship and conform to the specifications mentioned in Annex A.4.2 If any defect is found in the products, the Seller shall, at its option, replace or repair them, free of charge, without any delay.Article 5: Force Majeure5.1 If either party is prevented from fulfilling its contractual obligations due to force majeure events, it shall notify the other party immediately and provide necessary evidence.5.2 The affected party shall strive to overcome the force majeure situation and resume performance as soon as possible.Article 6: Termination6.1 This contract shall be terminated only by mutual agreement in writing or in accordance with the applicable laws.6.2 In case of breach of any term of this contract by either party, the other party may terminate this contract by giving a written notice to that effect.Article 7: Miscellanea7.1 This contract constitutes the entire agreement between the Seller and the Buyer and no modification shall be made except in writing and signed by both parties.7.2 This contract is made in duplicate, one for each party, with equal legal effect.7.3 Any disputes arising out of or in connection with this contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, either party may submit the dispute to [Arbitration Institution] for arbitration in accordance with its rules.7.4 This contract is governed by the laws of [Applicable Country].篇3SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made and executed on [Date] by and between [Seller's Name] (hereinafter referred to as the "Seller"), and [Buyer's Name] (hereinafter referred to as the "Buyer").Article 1: Identification of the PartiesThe Seller and the Buyer hereby agree to the terms and conditions stated below.Article 2: Product Description2.1 The Product to be sold is described in detail in Annex A, including its specifications, quality standards, and packaging requirements.Article 3: Price and Payment3.1 The price of the Product shall be as stated in Annex B. The Price includes all costs associated with the Product, including taxes, duties, and other applicable charges.3.2 Payment shall be made in full upon receipt of the Product, through the means specified in Annex C.Article 4: Delivery4.1 Delivery shall be made within the timeframe specified in Annex D.4.2 The Seller shall ensure that the Product is properly packaged and labeled for safe transportation to the Buyer.Article 5: Quality Assurance5.1 The Seller shall ensure that the Product meets the specifications and quality standards set out in Annex A.5.2 If the Buyer finds any defects in the Product, the Seller shall promptly replace or repair the Product, at no additional cost to the Buyer.Article 6: Warranty and Liabilities6.1 The Seller provides a warranty for the Product as specified in Annex E.6.2 In case of any claim by the Buyer related to the Product, the Seller shall be liable for any losses incurred by the Buyer, up to the value of the Product.Article 7: Force Majeure7.1 Neither party shall be liable for failure to perform due to force majeure events, such as natural disasters, wars, riots, or government actions, provided that such party promptly notifies the other party of such events.Article 8: Termination8.1 This Contract may be terminated by either party in the event of a breach by the other party of its contractual obligations, provided that such breach is not cured within a reasonable period of time.Article 9: Dispute Resolution9.1 Any disputes arising out of or in connection with this Contract shall be resolved through友好协商(amicable negotiation). If no settlement can be reached, either party may submit the dispute to [arbitration institution or court] for resolution.篇4Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Name], with its principal place of business located at [Seller's Address] (hereinafter referred to as "Seller"), and [Buyer's Name], with its principal place of business located at [Buyer's Address] (hereinafter referred to as "Buyer").1. Scope of Contract(a) The Seller agrees to sell and the Buyer agrees to purchase the under mentioned goods/products, details of which are given in the Annexure A attached hereto and made a part of this Contract.(b) The quantity, quality, specifications, packing, and other relevant terms of the goods/products to be sold shall be clearly stated in Annexure A. The Seller guarantees the accuracy of the same.2. Price and Payment Terms(a) The total contract price for the goods/products mentioned in Annexure A shall be [Contract Price]. The prices are fixed and firm.(b) Payment terms: The Buyer shall make payment through [Payment Method] to the Seller's account within [Payment Timeframe] after the date of this Contract.3. Delivery and Shipping(a) The Seller shall arrange for delivery of thegoods/products to the port specified by the Buyer within [Delivery Timeframe].(b) Shipping documents shall be issued by the Seller and delivered to the Buyer in a timely manner to ensure smooth shipping.4. Quality Assurance and Inspection(a) The Seller guarantees that the goods/products shall be new and of the quality and specifications stipulated in Annexure A.(b) The Buyer has the right to conduct inspections during production and upon receipt of the goods/products to ensure conformity with the contract specifications.5. Risk and Ownership TransferRisk of loss or damage to the goods/products passes to the Buyer upon delivery to the port specified by the Buyer. Ownership of the goods/products shall transfer to the Buyer upon full payment by the Buyer.6. Force MajeureIn case of any delay or failure in performance due to causes beyond the control of either party, such as war, riots, natural disasters, or government intervention, the affected party shall immediately notify the other party in writing. The affected partyshall use reasonable efforts to mitigate the consequences of such force majeure event.7. Warranty and Claims(a) The Seller shall be responsible for any defects in material or workmanship in the goods/products for a period of [Warranty Period] from the date of delivery to the Buyer. During this period, any defects shall be rectified by the Seller at its cost.(b) If any claims are to be made by the Buyer, they must be submitted in writing within [Claim Period] of receipt of the goods/products. Failure to do so shall render claims invalid.8. ConfidentialityBoth parties shall maintain confidentiality of all information related to this contract that is not intended for public disclosure.9. TerminationThis Contract may be terminated by either party in case of a breach by the other party that is not cured within a reasonable period of time. Termination shall be effected by written notice to the other party.10. General Terms(a) This Contract constitutes the entire agreement between the parties and no modifications shall be made unless agreed to by both parties in writing.(b) Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, either party may submit such disputes to [Dispute Resolution Agency] for arbitration.(c) This Contract shall be governed by and construed in accordance with the laws of [Applicable Law Jurisdiction].(d) This Contract is made in [Number of Languages] originals, each being equally authentic.(e) This Contract becomes effective as of the date stated at the beginning of this Contract and shall continue in full force and effect for a period of [Contract Duration].The parties have signed this Contract in [Signature Place] on the date stated at the beginning of this Contract.Seller:Name:Title:Date:Signature:Buyer:Name:Title:Date:Signature:ANNEXURE A - PRODUCTS AND SPECIFICATIONS [Please insert detailed list of products, specifications, quantity, quality, etc.] [This space left intentionally blank.] [Insert additional annexes if necessary.] [Insert company logos or other identifying marks if desired.]篇5Sales ContractThis Sales Contract is made on [Date] by and between [Seller's Full Name] (hereinafter referred to as "Seller"), and [Buyer's Full Name] (hereinafter referred to as "Buyer").Article 1: Description of GoodsThe Seller agrees to sell and the Buyer agrees to purchase the following goods: [Description of goods, including product name, quantity, specifications, and any other relevant details].Article 2: Price and PaymentThe total price for the goods shall be [Total Price in figures and currency]. Payment shall be made through [Payment method/s (e.g., wire transfer, credit card, etc.)]. The Buyer shall make the payment within [Time frame for payment (e.g., 30 days from date of signing this contract)].Article 3: DeliveryThe Seller shall deliver the goods to the Buyer at the following address: [Buyer's shipping address]. The delivery shall be completed within [Time frame for delivery].Article 4: Quality and InspectionThe Seller guarantees that the goods shall be of good quality and shall comply with the specifications mentioned in Article 1.The Buyer shall have the right to inspect the goods upon receipt. If any defects are found, the Buyer shall notify the Seller immediately.Article 5: Warranty and售后支持The Seller shall provide a warranty for the goods as follows: [Details of warranty period, terms and conditions]. The Seller shall also provide necessary after-sales support to the Buyer as needed.Article 6: Risks and LiabilityRisk of loss or damage to the goods shall pass to the Buyer upon delivery. The Seller shall be liable for any damage to the goods caused during transportation. However, if the damage is caused due to force majeure events (e.g., natural disasters), then the Seller shall not be liable.Article 7: TerminationThis Contract may be terminated by either party in case of breach of any term or condition by the other party. The party seeking termination shall provide a written notice to the other party specifying the reasons for termination.Article 8: Disputes and GrievancesAny disputes arising out of or in connection with this Contract shall be settled through friendly negotiations between the parties. If no settlement is reached, the dispute shall be referred to [Mediation/Arbitration institution or court of law].Article 9: Force MajeureNeither party shall be liable for failure to perform its obligations under this Contract due to force majeure events (e.g., natural disasters, wars, riots, etc.). The affected party shall provide timely notice to the other party regarding such events.Article 10: General TermsThis Contract constitutes the entire agreement between the parties and no modifications shall be made except by written agreement signed by both parties. This Contract is governed by the laws of [Country/State]. The original Contract in English shall be equally valid as any translated version. Any notices required under this Contract shall be in writing and sent to the addresses specified by the parties.In witness whereof, the parties have signed this Contract in duplicate, each party retaining one copy.Seller: _________________________ (Signature)Date: _________________________ (Date)Buyer: _________________________ (Signature)Date: _________________________ (Date)(Note: This is a template and should be customized according to specific requirements and circumstances.)篇6Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is made and entered into by and between [Buyer Name], whose registered office is located at [Buyer Address] (hereinafter referred to as the "Buyer"), and [Seller Name], whose registered office is located at [Seller Address] (hereinafter referred to as the "Seller").Preamble:After friendly negotiation and mutual understanding of the terms and conditions, the Buyer agrees to purchase from the Seller, and the Seller agrees to sell to the Buyer, the products specified in this Contract.Article 1: Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the under-mentioned commodity:[Product Description, Quantity, Quality, Specifications, Packaging, etc.]Article 2: Price and Payment2.1 The total contract price for the goods mentioned in Article 1 shall be [Price Amount].2.2 Payment shall be made by [Payment Method] through [Bank Name] within [Days/Weeks/Months] after the date of this Contract.Article 3: Delivery and Shipment3.1 The Seller shall deliver the goods within [Delivery Period] after receiving the order confirmation from the Buyer.3.2 The Seller shall inform the Buyer of the estimated date of shipment in good time before the shipment. The Seller shall ensure that the goods are shipped within the time as stipulated in this Contract. In case of force majeure, the Seller shall immediately notify the Buyer in writing of any delay in delivery.Article 4: Quality Inspection and Warranty4.1 The Seller shall ensure that all goods are of the quality, specifications and quantity agreed in this Contract. Any discrepancies must be promptly reported to the Buyer in writing.4.2 The Seller guarantees that the goods are free from any defects in material and workmanship for a period of [Warranty Period] from the date of arrival at the port of destination specified in this Contract. During this period, the Seller shall make up any defects in quality or quantity free of charge.Article 5: Risk and Insurance5.1 Risk of loss or damage to the goods passes to the Buyer upon delivery on board the vessel at the port of shipment specified in this Contract. Prior to that point, all risks shall be borne by the Seller.此外，合同还考虑了可能出现的法律争议问题，并为此制定了相应的解决方案。

英文版销售合同样本5篇篇1Sales ContractThis Sales Contract is made and entered into on this____(date)_______ by and between:Seller: ____(name)_______, with a business address of____(address)_______, hereinafter referred to as "Seller”.Buyer: ____(name)_______, with a business address of____(address)_______, hereinafter referred to as "Buyer”.1. Product Description: The Seller agrees to sell to the Buyer, and the Buyer agrees to purchase from the Seller, the following products: ____(description of products)_______.2. Quantity: The Buyer agrees to purchase____(quantity)_______ units of the above-mentioned products.3. Price: The price of the products shall be ____(price)_______ per unit. The total purchase price shall be ____(total price)_______. Payment shall be made in ____(currency)_______. The payment shall be made as follows: ____(payment terms)_______.4. Delivery: The Seller shall deliver the products to the Buyer at the address specified by the Buyer on ____(deliverydate)_______.5. Inspection and Acceptance: The Buyer shall have____(number of days)_______ days from the date of delivery to inspect the products and notify the Seller of any defects or nonconformities. If the Buyer fails to notify the Seller within the specified time frame, the products shall be deemed accepted.6. Warranty: The Seller warrants that the products are free from defects in material and workmanship. If any defects are found within ____(warranty period)_______ days from the date of delivery, the Seller shall replace the defective products at no additional cost to the Buyer.7. Governing Law: This Sales Contract shall be governed by and construed in accordance with the laws of the state of____(state)_____.8. Entire Agreement: This Sales Contract constitutes the entire agreement between the Seller and the Buyer with respect to the purchase and sale of the products and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the Seller and the Buyer have executed this Sales Contract as of the date first above written.Seller: __________________ Buyer:___________________________________________________________(Date)(Date)篇2Sales ContractThis Sales Contract (“Contract”) is entered into on [Date] (“Effective Date”) by and between [Seller Name], with an address at [Seller Address] (“Seller”) and [Buyer Name], with an address at [Buyer Address] (“Buyer”).1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the following goods: [Description of Goods], in the quantity of [Quantity] at the price of [Price] per unit.2. Payment Terms: The total purchase price for the goods shall be paid as follows: [Payment Terms]. Buyer shall makepayment in the currency of [Currency] to the bank account of Seller no later than [Due Date].3. Delivery: The goods shall be delivered to Buyer’s address at [Delivery Address] by [Delivery Method] no later than [Delivery Date]. The risk of loss or damage to the goods shall pass to Buyer upon delivery.4. Inspection: Buyer shall have the right to inspect the goods within [Inspection Period] days from the delivery date. If Buyer finds the goods to be non-conforming or defective, Buyer shall notify Seller in writing within the Inspection Period.5. Warranties: Seller warrants that the goods shall be free from defects in material and workmanship and shall conform to the specifications agreed upon by the parties. The warranty period shall be [Warranty Period] from the delivery date.6. Limitation of Liability: In no event shall Seller be liable for any indirect, incidental, special, or consequential damages arising out of or related to this Contract. Seller’s total liability shall not exceed the total purchase price paid by Buyer under this Contract.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of the State of [State], without regard to its conflict of law principles.8. Entire Agreement: This Contract constitutes the entire agreement between the parties concerning the sale of goods and supersedes all previous agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the Effective Date.Seller: ____________________________ Buyer:____________________________篇3Sales ContractThis Sales Contract ("Contract") is entered into by and between [Seller's Name], with a principal place of business at [Seller's Address] ("Seller"), and [Buyer's Name], with a principal place of business at [Buyer's Address] ("Buyer"), collectively referred to as the "Parties," on this [Date].1. Sale of Goods: Seller agrees to sell and deliver to Buyer, and Buyer agrees to purchase and accept delivery of the goodsdescribed in Exhibit A (the "Goods") in accordance with the terms and conditions of this Contract.2. Purchase Price: The Purchase Price for the Goods shall be [Amount] per [Unit], for a total purchase price of [Total Amount]. Buyer shall make payment of the Purchase Price in the manner set forth in Exhibit B.3. Delivery: Seller shall deliver the Goods to Buyer at [Delivery Location] on or before the Delivery Date set forth in Exhibit A. Buyer shall be responsible for all costs associated with the delivery of the Goods.4. Inspection and Acceptance: Buyer shall have [Number] days from the Delivery Date to inspect the Goods and notify Seller in writing of any defects or non-conformities. Buyer shall be deemed to have accepted the Goods unless Seller receives written notice of rejection within the specified period.5. Warranties: Seller warrants that the Goods conform to the specifications set forth in Exhibit A and are free from defects in material and workmanship.6. Limitation of Liability: In no event shall either Party be liable for any consequential, incidental, special, or indirectdamages, including without limitation, loss of profits, loss of business or loss of goodwill.7. Miscellaneous:7.1 This Contract contains the entire agreement between the Parties and supersedes any prior agreements or understandings, whether written or oral.7.2 This Contract shall be governed by the laws of [Jurisdiction], and any disputes arising under this Contract shall be resolved through arbitration in [Arbitration Venue].IN WITNESS WHEREOF, the Parties have executed this Contract as of the date first written above.Seller:____________________________[Signature][Printed Name][Title]Buyer:____________________________[Signature][Printed Name][Title]篇4Sales ContractThis Sales Contract (the "Contract") is made and entered into as of [Date] (the "Effective Date") by and between [Seller], with a registered address at [Address] (the "Seller"), and [Buyer], with a registered address at [Address] (the "Buyer").1. Description of GoodsThe Seller agrees to sell to the Buyer, and the Buyer agrees to purchase from the Seller, the following goods (the "Goods"):- Description of goods- Quantity- Price2. PriceThe total price for the Goods shall be [Total Price], which shall be paid by the Buyer to the Seller in [Currency] upon execution of this Contract.3. DeliveryThe Seller shall deliver the Goods to the Buyer at [Delivery Location] on or before [Delivery Date]. The Buyer shall bear all costs associated with the delivery of the Goods.4. Inspection and AcceptanceThe Buyer shall have [Number] days from the date of delivery to inspect the Goods and notify the Seller of any defects or nonconformities. If no notice is given within the specified time period, the Goods shall be deemed accepted by the Buyer.5. WarrantiesThe Seller warrants that the Goods shall be free from defects in materials and workmanship for a period of [Number] days from the date of delivery. The Seller's sole liability under this warranty shall be to repair or replace any defective Goods.6. Limitation of LiabilityIn no event shall either party be liable for any indirect, consequential, incidental or special damages arising out of or inconnection with this Contract, even if such party has been advised of the possibility of such damages.7. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [State/Country].8. Entire AgreementThis Contract constitutes the entire agreement between the parties with respect to the sale of the Goods and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the Effective Date.Seller:[Signature][Name][Title][Date]Buyer:[Signature][Name][Title][Date]篇5Sales ContractThis Sales Contract (the "Contract") is made and entered into this ___ day of ____, 20___, by and between [Seller], with a business address at [Seller's address] (the "Seller"), and [Buyer], with a business address at [Buyer's address] (the "Buyer").RECITALS1. The Seller is in the business of selling [description of goods or services].2. The Buyer wishes to purchase [description of goods or services] from the Seller.3. The Seller and the Buyer desire to set forth the terms and conditions of the sale of the goods or services as detailed below.AGREEMENT1. Sale of Goods/Services. The Seller agrees to sell and the Buyer agrees to purchase [description of goods or services] according to the terms and conditions set forth in this Contract.2. Price. The purchase price for the goods or services shall be ___ US Dollars ($__) per unit, for a total purchase price of ___ US Dollars ($__). Payment shall be made in the following manner: [payment terms, such as upfront payment, installment payments, etc.].3. Delivery. The Seller shall deliver the goods or perform the services to the Buyer at [delivery location] on or before [delivery date]. The Buyer shall be responsible for any shipping or delivery fees incurred.4. Inspection Period. The Buyer shall have a period of ___ days after delivery to inspect the goods or services and to notify the Seller of any defects or nonconformities. If the Buyer fails to notify the Seller within said period, the goods or services shall be deemed accepted by the Buyer.5. Warranties. The Seller warrants that the goods shall be free from defects in materials and workmanship for a period of ___ months from the date of delivery. The Seller also warrants that the services shall be performed in a professional and workmanlike manner.6. Indemnification. The Seller agrees to indemnify and hold harmless the Buyer from any claims, damages, or liabilities arising from any defects or nonconformities in the goods or services.7. Governing Law. This Contract shall be governed by the laws of the State of [State], without regard to its conflict of law principles.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.Seller: _____________________ Buyer:_____________________[Name and Title][Name and Title][Company Name][Company Name][Date][Date]。

销售合同英文范本5篇篇1Sales ContractThis Sales Contract (the "Contract") is entered into on [Date] between [Seller Name], with a registered address at [Seller Address], and [Buyer Name], with a registered address at [Buyer Address] (collectively referred to as the "Parties").1. Sale of GoodsThe Seller agrees to sell and the Buyer agrees to purchase the following goods (the "Goods"):- Description of goods:- Quantity:- Price:2. DeliveryThe Seller shall deliver the Goods to the Buyer at the following address: [Delivery Address]. The Goods shall be delivered on or before [Delivery Date].3. PaymentThe Buyer shall pay the Seller the total sum of [Total Amount] for the Goods. The payment shall be made in [Currency] in the following manner:- [Deposit amount] shall be paid upon signing this Contract.- The balance amount shall be paid upon delivery of the Goods.4. Inspection and AcceptanceUpon delivery of the Goods, the Buyer shall inspect the Goods and shall have [Number of Days] days to notify the Seller of any defects or non-conformity. If no notification is made within this period, the Goods shall be deemed accepted by the Buyer.5. WarrantyThe Seller warrants that the Goods shall be free from defects in materials and workmanship for a period of [Warranty Period] from the date of delivery.6. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [State/Country].IN WITNESS WHEREOF, the Parties hereto have executed this Contract as of the date first above written.SELLER BUYER[Signature] [Signature][Print Name] [Print Name]篇2Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is made and entered into as of [Date], by and between:Seller: [Seller's Name]Address: [Seller's Address]Contact number: [Seller's Contact Number]Buyer: [Buyer's Name]Address: [Buyer's Address]Contact number: [Buyer's Contact Number]The Seller and the Buyer shall collectively be referred to as the "Parties".1. Subject of the ContractThe Seller agrees to sell and deliver the following goods:Description: [Description of Goods]Quantity: [Quantity of Goods]Unit Price: [Unit Price of Goods]Total Price: [Total Price of Goods]2. DeliveryThe Seller shall deliver the goods to the Buyer at the following address:Delivery Address: [Delivery Address]Delivery Date: [Delivery Date]3. PaymentThe Buyer shall pay the total price of the goods as follows:- [Payment Method(s)]- [Payment Schedule]- [Total Payment Amount]4. Inspection and AcceptanceThe Buyer shall inspect the goods upon delivery. If the goods are found to be damaged or defective, the Buyer shall notify theSeller within [Number of Days] days of delivery. The Seller shall replace or repair the goods at no additional cost to the Buyer.5. Risk of LossThe risk of loss shall pass to the Buyer upon delivery of the goods to the Buyer's address.6. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [State/Country].7. Entire AgreementThis Contract constitutes the entire agreement between the Parties with respect to the subject matter hereof and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the Parties hereto have executed this Contract as of the date first above written.Seller: [Seller's Signature]Buyer: [Buyer's Signature][Date]篇3Sales Contract TemplateThis Sales Contract is entered into on [date], between [Seller's Name], hereinafter referred to as the "Seller", and [Buyer's Name], hereinafter referred to as the "Buyer".1. Description of GoodsThe Seller agrees to sell to the Buyer the following goods:- Description of goods- Quantity- Price per unit2. DeliveryThe Seller agrees to deliver the goods to the Buyer's specified location on [date]. The Buyer agrees to accept the delivery of the goods according to the terms specified in this contract.3. Price and PaymentThe total price of the goods is [total price]. The Buyer agrees to make payment in full to the Seller by [payment method] on or before the delivery date.4. Inspection and AcceptanceThe Buyer has the right to inspect the goods upon delivery. If the goods do not meet the specifications outlined in this contract, the Buyer has the right to reject the goods and request a refund.5. WarrantyThe Seller warrants that the goods are free from defects in materials and workmanship for a period of [warranty period]. If any defects are discovered during this period, the Seller agrees to repair or replace the goods at no additional cost to the Buyer.6. Limitation of LiabilityThe Seller shall not be liable for any damages resulting from the use or misuse of the goods by the Buyer.7. Governing LawThis contract shall be governed by the laws of[State/Country].8. Entire AgreementThis contract constitutes the entire agreement between the Seller and the Buyer and supersedes any prior agreements or understandings between the parties.IN WITNESS WHEREOF, the parties hereto have executed this Sales Contract as of the date first written above.Seller: [Seller's Signature]Buyer: [Buyer's Signature]篇4Sales ContractThis Sales Contract ("Contract") is entered into by and between [Seller], with a principal place of business at [Address], and [Buyer], with a principal place of business at [Address], collectively referred to as the "Parties."1. Sale of Goods1.1 Seller agrees to sell, transfer, and deliver to Buyer the following goods: [Description of Goods] in the quantities and at the prices as described in Exhibit A attached hereto.1.2 Buyer agrees to accept and pay for the goods according to the terms and conditions set forth in this Contract.2. Price and Payment2.1 The total purchase price of the goods shall be [Amount], payable in [currency], in accordance with the payment terms set forth in Exhibit A.2.2 Payment shall be made by [method of payment], with the first installment due on [Date] and subsequent installments due on a [frequency] basis thereafter.3. Delivery3.1 Seller shall deliver the goods to Buyer's premises at [Address] on or before [Date].3.2 If Seller fails to deliver the goods by the agreed-upon delivery date, Buyer may, at its option, cancel the order and receive a full refund of any amounts paid.4. Risk of Loss4.1 The risk of loss of the goods shall pass to Buyer upon delivery of the goods to Buyer's premises.5. Inspection and Acceptance5.1 Buyer shall inspect the goods upon delivery and shall have [number] days to notify Seller in writing of any defects or nonconformities. Failure to provide notice within this timeframe shall constitute acceptance of the goods.5.2 If the goods are found to be defective or nonconforming, Seller shall have the option to repair or replace the goods at no additional cost to Buyer.6. Warranties6.1 Seller warrants that the goods shall be free from defects in material and workmanship and shall conform to any specifications provided by Buyer.6.2 Seller makes no other warranties, express or implied, including but not limited to warranties of merchantability or fitness for a particular purpose.7. Termination7.1 Either Party may terminate this Contract upon written notice if the other Party fails to perform its obligations under the Contract and such failure continues for a period of [number] days after written notice of the breach.8. Governing Law8.1 This Contract shall be governed by and construed in accordance with the laws of the State of [State].IN WITNESS WHEREOF, the Parties have executed this Sales Contract as of the Effective Date.[Signature of Seller] [Signature of Buyer]__________________________ __________________________[Seller Name] [Buyer Name]Date: ____________________ Date: ____________________篇5Sales ContractThis Sales Contract is entered into on [insert date] by and between [Seller’s Company Name], located at [Seller’s Address], and [Buyer’s Company Name], located at [Buyer’s Address].1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the following goods:– [Description of goods]– Quantity: [Number of units or volume]– Price: [Price per unit or total amount]2. Delivery: The goods will be delivered to Buyer at the address provided by Buyer on or before the agreed-upon delivery date of [insert date]. Delivery will be made by [Seller’spreferred shipping method]. Any additional costs incurred for expedited delivery will be borne by Buyer.3. Payment Terms: Buyer agrees to pay the total amount of [insert total amount] within [number] days of receiving the goods. Payments will be made in [currency] to [Seller’s preferred payment method], unless otherwise agreed upon by both parties.4. Inspection of Goods: Buyer has [number of days] from the date of delivery to inspect the goods. If the goods are found to be defective or not as described, Buyer must notify Seller in writing within this inspection period. Seller will either replace the goods or refund Buyer’s payment.5. Warranty: Seller warrants that the goods are free of defects in material and workmanship and will conform to the specifications agreed upon by both parties. Seller’s liability under this warranty is limited to the replacement or repair of defective goods.6. Governing Law: This Sales Contract shall be governed by the laws of [State/Country] and any disputes arising from the contract shall be resolved in the courts of [State/Country].7. Entire Agreement: This Sales Contract constitutes the entire agreement between Seller and Buyer with respect to the sale of goods and supersedes any previous agreements or understandings, whether written or oral.In witness whereof, the parties hereto have executed this Sales Contract as of the date first above written.Seller: _______________________Buyer: _______________________Signed and sealed in the presence of:Witness: _______________________Date: _______________________This Sales Contract is effective as of the date first above written and shall remain in effect until all obligations under the contract have been fulfilled by both parties.。

销售合同英文范本8篇篇1SALES CONTRACTThis Sales Contract is made by and between the following two parties:Party A: [Name of Seller]Party B: [Name of Buyer]1. Scope of Contract:This Contract stipulates the terms and conditions for the sale and purchase of the following products: [Product Description, Quantity, Quality, Specifications, etc.] (hereinafter referred to as "Products"). The parties agree to strictly adhere to the terms and conditions set out below.2. Product Description:[Description of the product to be sold, including specifications, quality standards, quantity, etc.]3. Price and Payment:3.1 The total price for the Products shall be [Price in agreed currency].3.2 Payment terms: [Specify payment terms such as T/T in advance, L/C, D/P, etc.]3.3 Any changes to the price or payment terms must be mutually agreed upon in writing.4. Delivery and Shipment:4.1 Delivery Date: [Specify delivery date].4.2 Delivery Location: [Specify delivery location].4.3 Shipping Documents: [Specify required shipping documents].4.4 Risks and responsibilities for the Products shall pass to Party B upon delivery. Any delay in delivery shall be mutually discussed and resolved in writing.5. Quality and Inspection:5.1 Party A shall ensure that the Products comply with the agreed quality standards.5.2 Party B shall have the right to inspect the Products before delivery to ensure quality compliance.5.3 If any defects are found during inspection, Party A shall be responsible for rectifying or replacing the Products as per the agreed terms.6. Force Majeure:In case of any force majeure events such as natural disasters, war, strikes, government policies, etc., which hinder the performance of this Contract, the affected party shall notify the other party in writing within a reasonable period of time and take measures to mitigate the effects of such events. The period of performance may be extended accordingly.7. Warranty:Party A shall provide a warranty for the Products as per the terms and conditions agreed upon by both parties. Any defects in the Products shall be rectified or replaced as per the warranty terms.8. Confidentiality:Both parties shall maintain confidentiality of all information related to this Contract and its execution, except for anyinformation that is in the public domain or required to be disclosed by law or regulatory authorities.9. Dispute Resolution:Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiations between both parties. If no settlement can be reached, such disputes shall be submitted to [specify arbitration institution or court] for arbitration/settlement in accordance with [specify applicable laws]. The arbitration award shall be final and binding on both parties.10. Termination:This Contract may be terminated by either party in the event of a breach by the other party which is not rectified within a reasonable period of time. Termination shall be notified to the other party in writing with reasonable grounds for termination stated. The provisions of this Contract which by their nature would survive termination shall remain in full force and effect after termination.篇2SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:whereby both parties agree as follows:1. Scope of Contract(1) The Buyer agrees to purchase the goods listed in Annex I to this Contract from the Seller, and the Seller agrees to sell and deliver the goods to the Buyer on the terms and conditions stipulated below.(2) The total contract value is specified in Annex I.2. Delivery(1) The Seller shall deliver the goods to the port specified in Annex I with all necessary documents in strict accordance with the terms of this Contract.(2) Delivery dates and documents must be issued timely according to the agreed terms of delivery and be clearly indicated on all shipping documents or notice of shipment effected to the Buyers. Otherwise, any losses incurred to theBuyers attributable to delayed shipment or inability to present a satisfactory document will be borne by the Seller in full.(3) The Seller should immediately notify the Buyers byFax/Mail once ship loading of the goods commences and also inform the Buyers of the Contract No., name of vessel, date of shipment, quantity loaded and such other relevant information as regards loading of the goods.3. Terms of PaymentPayment shall be made by irrevocable sight L/C within XX days after receipt of the first shipping advice FAX together with copy of shipping documents through Bank of XXXX Banker to the Seller.4. Quality & Inspection(1) The Seller shall guarantee that all goods shall be of best quality and be promptly fit for ordinary purpose or intended use. If they fail to meet relevant specifications stipulated in this Contract within XX months from their arrival at destination port after unloading from vessel and such failure are due to poor quality, the Seller shall replace them free of charge or compensate for any loss sustained by the Buyers in accordance with the contract price.(2) The quality and quantity of the goods shall be examined by the Inspection Company at the port of destination. If any claim is filed by the Buyers against such Inspection Company’s Inspection Certificate, which is mutually acceptable, within XX days after arrival of goods at port of destination, the Seller shall be responsible for any loss attributable to its poor quality or short weight.5. ClaimsThe Seller shall be responsible for any damage or loss attributable to its poor quality or short weight if claims are made by the Buyers against Inspection Certificate issued by Inspection Company appointed by the Buyers in writing within XX days after arrival of goods at port of destination and confirmed by Inspection Company appointed by both parties jointly before settlement of claims between parties are reached.6. Force MajeureIn case Force Majeure circumstances last for more than XX days, both parties shall negotiate a settlement solution on mutually beneficial basis through friendly discussion.In case Force Majeure circumstances occur during performance of this Contract, both parties should strive forsettlement through friendly discussion in order to minimize losses incurred thereby and continue performance under this Contract after removal of such Force Majeure circumstances as soon as possible.篇3SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Name: __________________________________Address: __________________________________Country/Region: _____________________________Seller:Name: __________________________________Address: __________________________________Country/Region: _____________________________I. Contract ObjectThe Seller agrees to sell and the Buyer agrees to purchase the following products: (Here insert a detailed list of products, including product name, specifications, quantity, unit price, total value, etc.)II. Terms of DeliveryThe products shall be delivered FOB (Free On Board) _______ (Port of Shipment) on or before the date _______ (Time of Delivery). The Seller shall inform the Buyer of the expected date of dispatch at least 15 days prior to the date of delivery.III. Terms of PaymentPayment shall be made by irrevocable Letter of Credit (L/C) payable at sight. The L/C shall be issued by the Buyer's bank in favor of the Seller's bank and shall be valid for 30 days after the date of shipment as stipulated in this Contract.IV. Quality and InspectionThe products shall be in accordance with the quality standards specified in this Contract. The Seller shall provide a quality certificate as evidence of the quality of the products. The products shall be inspected by a third-party inspection agency mutually agreed upon by the Buyer and the Seller before shipment. If any disputes arise over the quality of the products,the third-party inspection agency's report shall be the basis for settlement.V. Claims and PenaltyIn case of claims due to late delivery or poor quality of the products, the Buyer shall notify the Seller immediately upon arrival of the products at the port of destination. The Seller shall be responsible for any claims that are proved to be valid after investigation. If late delivery exceeds 15 days, the Seller agrees to pay a penalty equal to 1% of the total value of the products for each week of delay. However, such penalty shall not exceed a total of 5% of the total contract value.VI. Force MajeureNeither party shall be liable for any failure to perform its obligations under this Contract due to force majeure events such as natural disasters, wars, riots, etc., which are beyond its control. If such events continue for more than six months, this Contract may be terminated by mutual agreement of both parties without any liability on either side.VII. Settlement of DisputesVIII. General ProvisionsThe Buyer hereby confirms that they have read and fully understand all terms and conditions stated in this Contract and agree to abide by them. The Seller confirms that they are willing to sell the products specified in this Contract on the terms and conditions stated herein.Buyer: ________________________________ (Signature)Date: ________________ (Date of Signing)Seller: ________________________________ (Signature)Date: ________________ (Date of Signing)Note: This contract is only a sample and should be customized according to specific needs and circumstances before use. It is recommended to have legal counsel review any contract before execution.篇4SALES CONTRACT销售合同This Sales Contract is made by and between [买方名称], hereinafter referred to as "Buyer" and [卖方名称], hereinafter referred to as "Seller," whereby the Buyer agrees to purchasefrom the Seller and the Seller agrees to sell to the Buyer the under mentioned commodity subject to the terms and conditions stipulated below:兹有买方[买方名称]与卖方[卖方名称]（以下简称“卖方”）订立本合同，买方同意向卖方购买，卖方同意出售以下列条款规定的商品：Article 1: Commodity商品The commodity to be delivered under this Contract shall be as follows: [商品名称、规格、数量及价格等详细信息]。

国际销售合同范本英文3篇篇一International Sales Contract Template (English)This International Sales Contract (hereinafter referred to as the "Contract") is made and entered into on this [Day] of [Month], [Year], and between the following parties:[ Seller's Full Name or Company Name ] (hereinafter referred to as the "Seller"),Address: [ Seller's Address ],And[ Buyer's Full Name or Company Name ] (hereinafter referred to as the "Buyer"),Address: [ Buyer's Address ].WHEREAS, the Seller is engaged in the business of manufacturing and selling [ Description of Goods ] (hereinafter referred to as the "Goods") and is willing to sell the Goods to the Buyer;WHEREAS, the Buyer is interested in purchasing the Goods from the Seller;NOW, THEREFORE, in consideration of the mutual covenants and agreements contned herein, the parties agree as follows:1. Definitions1.1 "Contract" means this International Sales Contract, including all schedules, exhibits, and appendices attached hereto.1.2 "Goods" means the [ Description of Goods ] as specified in the attached Schedule A.1.3 "Delivery Date" means the date on which the Goods are delivered to the Buyer at the designated delivery location.1.4 "Payment Terms" means the terms and conditions of payment set forthin Clause 4 of this Contract.1.5 "Purchase Price" means the total price for the Goods as specified in Clause 2 of this Contract.1.6 "Incoterms" means the International Commercial Terms as published the International Chamber of Commerce.2. Sale and Purchase of Goods2.1 The Seller agrees to sell, and the Buyer agrees to buy, the Goods in accordance with the terms and conditions of this Contract.2.2 The description, quantity, and quality of the Goods are as specified in Schedule A attached hereto.2.3 The Purchase Price for the Goods shall be [ Purchase Price ] (in words: [ Purchase Price in Words ]).3. Delivery and Shipment3.1 The Seller shall deliver the Goods to the Buyer at the designated delivery location on or before the Delivery Date specified in Schedule B attached hereto.3.2 The Seller shall be responsible for the transportation, insurance, and all other costs associated with the delivery of the Goods to the designated delivery location, in accordance with Incoterms [ Specify Incoterms ].3.3 The Buyer shall be responsible for unloading the Goods at the designated delivery location and for all costs associated with unloading, customs clearance, and importation of the Goods into the Buyer's country.4. Payment Terms4.1 The Buyer shall make payment for the Goods in accordance with the Payment Terms specified in Schedule C attached hereto.4.2 Payment shall be made in [ Currency ] and shall be made wire transfer to the Seller's designated bank account.5. Inspection and Acceptance5.1 The Buyer shall have the right to inspect the Goods upon delivery. If the Goods do not conform to the description, quantity, or quality specified in Schedule A, the Buyer may reject the Goods and return them to the Seller at the Seller's expense.5.2 If the Buyer accepts the Goods, the Buyer shall issue a written acceptance to the Seller within [ Number ] days of delivery.6. Warranties6.1 The Seller warrants that the Goods are free from any liens and encumbrances and that the Seller has good and marketable to the Goods.6.2 The Seller warrants that the Goods conform to the description, quantity, and quality specified in Schedule A and are fit for the purposes intended the Buyer.7. Intellectual Property Rights7.1 The Seller warrants that the Goods do not infringe any intellectual property rights of any third party.8. Force Majeure8.1 Neither party shall be liable for any delay or flure to perform its obligations under this Contract due to any cause beyond its reasonable control, including but not limited to acts of God, labor disputes, or disruptions in transportation.9. Termination9.1 This Contract may be terminated either party upon written notice to the other party in the event of a material breach of this Contract the other party, which breach is not cured within [ Number ] days after receipt of written notice.10. Governing Law and Dispute Resolution10.1 This Contract shall be governed and construed in accordance with the laws of [ Specify Jurisdiction ].10.2 Any disputes arising out of or in connection with this Contract shall be resolved arbitration in accordance with the rules of the [ Specify Arbitration Institution ].11. Miscellaneous11.1 This Contract constitutes the entire agreement between the parties and supersedes all prior agreements and understandings, whether written or oral, relating to the subject matter hereof.11.2 This Contract may be amended or modified only a written instrument executed both parties.IN WITNESS WHEREOF, the parties have executed this Contract as of the date first above written.[ Seller's Signature ][ Seller's Name ][ Seller's Title ][ Buyer's Signature ][ Buyer's Name ][ Buyer's Title ]Noun Definitions:Contract: A legally binding agreement between two or more parties.Goods: Tangible items that are the subject of the sale.Delivery Date: The date which the goods should be delivered to the buyer.Payment Terms: The agreed-upon conditions for the payment of goods or services.Purchase Price: The total amount to be pd for the goods.Incoterms: International rules for the interpretation of the most monly used terms in foreign trade.篇二International Sales Contract Template (English)This International Sales Contract (hereinafter referred to as the "Contract") is made and entered into as of [Date], and between [Seller's Name], a pany organized and existing under the laws of [Country of Seller], with its principal place of business located at [Seller's Address] (hereinafter referred to as the "Seller"), and [Buyer's Name], a pany organized and existing under the laws of [Country of Buyer], with its principal place of business located at [Buyer's Address] (hereinafter referred to as the "Buyer").1. RecitalsWHEREAS, the Seller is engaged in the business of manufacturing and selling [Description of Goods] (hereinafter referred to as the "Goods");WHEREAS, the Buyer desires to purchase the Goods from the Seller;NOW, THEREFORE, in consideration of the mutual covenants and agreements contned herein, the parties hereto agree as follows:2. Definitionsa. "Contract Price" means the total purchase price of the Goods as specified in Article 4 of this Contract.b. "Delivery Date" means the date on which the Goods shall be delivered to the Buyer as specified in Article 5 of this Contract.c. "Inspection Period" means the period of time during which the Buyer is end to inspect the Goods upon delivery, as specified in Article 7 of this Contract.d. "Payment Terms" means the terms and conditions of payment as specified in Article 6 of this Contract.e. "Shipment" means the dispatch of the Goods from the Seller to the Buyer as specified in Article 5 of this Contract.3. Goodsa. Description: The Goods to be sold the Seller to the Buyer under this Contract shall be [Description of Goods].b. Quantity: The quantity of Goods to be purchased the Buyer under this Contract shall be [Quantity].4. Contract Pricea. The total purchase price for the Goods shall be [Contract Price], inclusiveof all taxes, duties, and other charges, unless otherwise specified.b. The Contract Price shall be pd in [Currency], and the payment terms are as follows:[Specify payment terms, such as: payment upon delivery, 30-day credit terms, etc.]5. Shipment and Deliverya. The Seller shall ship the Goods to the Buyer at [Delivery Address] on or before the Delivery Date.b. The Seller shall provide the Buyer with all necessary documentation related to the shipment, including but not limited to the mercial invoice, packing list, and bill of lading.c. The risk of loss and to the Goods shall pass to the Buyer upon delivery to the designated Delivery Address.6. Payment Termsa. The Buyer shall make payment for the Goods in accordance with the Payment Terms specified in Article 4 of this Contract.b. If the Buyer fls to make payment in accordance with the Payment Terms, the Seller shall have the right to terminate this Contract and pursue legal action for any outstanding payments.7. Inspection and Acceptancea. Upon delivery, the Buyer shall have a period of [Inspection Period] to inspect the Goods.b. If the Goods are found to be defective or non-conforming, the Buyer shall notify the Seller in writing within the Inspection Period.c. If the Buyer fls to notify the Seller within the Inspection Period, the Goods shall be deemed to be accepted the Buyer.8. Warrantiesa. The Seller warrants that the Goods are free from any liens and encumbrances and that the Goods conform to the specifications and descriptions set forth in this Contract.b. The Seller warrants that the Goods are of merchantable quality and fit for the purpose for which they are intended.9. Limitation of Liabilitya. The Seller's liability for any clms, losses, damages, or expenses arising out of or in connection with this Contract shall be limited to the Contract Price.b. The Seller shall not be liable for any indirect, special, or consequential damages, including but not limited to loss of profits, loss of business, or loss of use.10. Force Majeurea. Neither party shall be liable for any flure or delay in the performance of its obligations under this Contract due to any cause beyond its reasonable control, including but not limited to acts of God, labor disputes, or disruptions in transportation.11. Governing Law and Dispute Resolutiona. This Contract shall be governed and construed in accordance with the laws of [Governing Jurisdiction].b. Any disputes arising out of or in connection with this Contract shall be resolved through binding arbitration in accordance with the rules of the [Arbitration Association], and the decision of the arbitrator(s) shall be final and binding upon the parties.12. Entire AgreementThis Contract constitutes the entire agreement between the parties and supersedes all prior agreements and understandings, whether written or oral, relating to the subject matter hereof.IN WITNESS WHEREOF, the parties hereto have executed this International Sales Contract as of the date first above written.[Seller's Name]By: [Name of Authorized Representative]Title: [Title of Authorized Representative][Buyer's Name]By: [Name of Authorized Representative]Title: [Title of Authorized Representative]NAMES DEFINED:Contract Price: The total purchase price of the Goods as specified in the Contract.Delivery Date: The date on which the Goods are to be delivered to the Buyer.Inspection Period: The period during which the Buyer is allowed to inspect the Goods upon delivery.Payment Terms: The conditions under which the payment for the Goods is to be made.Shipment: The dispatch of the Goods from the Seller to the Buyer.篇三Title: International Sales Contract Template (English)This International Sales Contract (hereinafter referred to as the "Contract") is made and entered into as of [Date], and between [Seller's Name] (hereinafterreferred to as the "Seller"), a pany incorporated under the laws of [Country of Seller], and [Buyer's Name] (hereinafter referred to as the "Buyer"), a pany incorporated under the laws of [Country of Buyer].1. RecitalsWHEREAS, the Seller is engaged in the business of manufacturing and selling [Description of Goods] (hereinafter referred to as the "Goods");WHEREAS, the Buyer desires to purchase the Goods from the Seller for the purpose of resale or use;NOW, THEREFORE, in consideration of the mutual covenants and agreements contned herein, the parties hereto agree as follows:1.1 DefinitionsFor the purposes of this Contract, the following terms shall have the meanings set forth below:Goods: The products to be purchased the Buyer from the Seller as specified in Exhibit A attached hereto (Annexure A).Delivery: The act of transferring the Goods from the Seller to the Buyer at the specified Delivery Location.Delivery Location: The location designated the Buyer where the Goods are to be delivered.Payment Terms: The terms and conditions upon which the Buyer agrees to make payment for the Goods.Force Majeure: An unforeseeable event beyond the control of a party, which prevents one or both parties from fulfilling their contractual obligations.Inspection: The process which the Buyer examines the Goods to ensure their quality and pliance with the specifications agreed upon.2. Purchase and Sale of Goods2.1 The Seller agrees to sell, and the Buyer agrees to buy, the Goods described in Exhibit A attached hereto (Annexure A) according to the terms and conditions set forth in this Contract.2.2 The total purchase price for the Goods shall be [Price], excluding taxes, duties, levies, or other charges imposed any government authority (collectively referred to as "Taxes"). The Buyer shall be responsible for支付 all Taxes.3. Delivery and Shipment3.1 The Seller shall deliver the Goods to the Delivery Location on or before the Delivery Date specified in Exhibit A.3.2 The risk of loss and to the Goods shall pass to the Buyer upon delivery at the Delivery Location.3.3 The Seller shall provide the Buyer with all necessary documentation, including but not limited to packing lists, mercial invoices, and certificates of origin, as required for the importation of the Goods into the Buyer's country.4. Payment Terms4.1 The Buyer shall make payment for the Goods in accordance with the Payment Terms specified in Exhibit B attached hereto (Annexure B).4.2 Payment shall be made in [Currency], unless otherwise agreed upon the parties in writing.5. Inspection and Acceptance5.1 The Buyer shall have the right to inspect the Goods upon delivery. If the Goods do not conform to the agreed specifications, the Buyer shall notify the Seller in writing within [Number] days of delivery.5.2 If the Goods are found to be defective or non-conforming, the Buyer may, at its sole discretion, reject the Goods and require the Seller to replace the Goods or refund the purchase price.6. Warranties6.1 The Seller warrants that the Goods are of merchantable quality and fit for the purpose for which they are intended.6.2 The Seller warrants that the Goods are free from any liens and encumbrances.7. Force Majeure7.1 Neither party shall be liable for any delay or flure to perform its obligations under this Contract due to Force Majeure, provided that the affectedparty promptly notifies the other party of the existence and nature of the Force Majeure.8. Termination8.1 Either party may terminate this Contract upon written notice to the other party if the other party breaches any material term or condition of this Contract and fls to cure such breach within [Number] days after receipt of written notice thereof.9. Governing Law and Dispute Resolution9.1 This Contract shall be governed and construed in accordance with the laws of [Jurisdiction].9.2 Any disputes arising out of or in connection with this Contract shall be resolved arbitration in accordance with the rules of the [Arbitration Institution], and the decision of the arbitrator(s) shall be final and binding upon the parties.10. Miscellaneous10.1 This Contract constitutes the entire agreement between the parties and supersedes all prior agreements and understandings, whether written or oral, relating to the subject matter hereof.10.2 Any amendment or modification of this Contract shall be in writing and signed both parties.IN WITNESS WHEREOF, the parties have executed this International Sales Contract as of the date first above written.[Signature of Seller]Name: [Name of Seller's Authorized Representative]Title: [Title of Seller's Authorized Representative][Signature of Buyer]Name: [Name of Buyer's Authorized Representative]Title: [Title of Buyer's Authorized Representative]Noun Definitions:Seller: The party selling the Goods.Buyer: The party purchasing the Goods.Goods: The products or items being sold.Delivery: The act of transferring the Goods from the Seller to the Buyer.Delivery Location: The designated place where the Goods are to be delivered.Payment Terms: The conditions under which payment for the Goods is to be made.Force Majeure: Unforeseen events beyond a party's control that prevent them from fulfilling their contractual obligations.Inspection: The process of examining the Goods to ensure they meet the agreed specifications.Warranties: Statements or guarantees made the Seller regarding the quality or condition of the Goods.Arbitration: A method of dispute resolution involving an arbitrator who makes a binding decision.。