当前位置：文档之家 › 78L05AC中文资料

78L05AC中文资料

  • 格式：pdf
  • 大小：90.41 KB
  • 文档页数：7

PLANETA JSC , 2/13 Fedorovsky Ruchei, Veliky Novgorod, 173004, Russia Ph./Fax: +7–816–2231736 E-mail: planeta@ © August 2001 Rev 1 /~planetaThe Linear IC'sThree-Terminal Low Current Positive Voltage RegulatorsDESCRIPTIONThe 78L00A Series of three terminal positive voltage regulators is available with several fixed output voltages making them useful in a wide range of applications. These regulators are inexpensive, vise-to-use devices suitable for a multitude of applications that require a regulated supply of up to 100 mA. These regulators feature internal current limiting and thermal shutdown making them remarkably rugged. No external components are required with the 78L00A devices in many applications.These devices offer a substantial performance advantage over the traditional zener diode-resistor combination, as output impedance and quiescent current are substantionally reduced.The voltages available allow the 78L00A to be used in logic systems, instrumentation, HiFi, and other solid state electronic equipment.The 78L00A is available in 3-Pin plastic package SOT54 (Z), 3-Pin mini power plastic package SOT89 (F) and the 8-Pin plastic package SO8 (D) offers superior quality and performance at low cost.FEATURESØ High Output CurrentI O = 100 mAØ Fixed Output VoltageV O = 5 V, 6 V, 8 V, 12 V, 15 VØ Complementary Negative Regulators 79L00A Series Ø Available in either ±5% (AC) SelectionDEVICE TYPE / NOMINAL VOLTAGEPackage 5% Output VoltageAccuracy VoltageZ SuffixF Suffix D Suffix 78L05AC 5 78L05ACZ 78L05ACF 78L05ACD 78L06AC6 78L06ACZ78L06ACF 78L06ACD 78L08AC 8 78L08ACZ 78L08ACF 78L08ACD 78L09AC 9 78L09ACZ 78L09ACF 78L09ACD 78L12AC12 78L12ACZ 78L12ACF 78L12ACD 78L15AC 1578L15ACZ78L15ACF78L15ACD1 – Output2 – Common3 – Input11 – Output2 – Common3 – Input151 – Output,2 – Common,3 – Common,4 – No Connect,5 – No Connect,6 – Common,7 – Common, 4 – Input78L00AC SeriesPh./Fax: +7–816–2231736 PLANETA JSC , 2/13 Fedorovsky Ruchei, Veliky Novgorod, 173004, Russia E-mail: planeta@ /~planeta © August 2001 Rev 12ABSOLUTE MAXIMUM RATINGS (T A = 25 °C)RatingSymbol Value Unit Input VoltageV O = 5 V to 9 V V O = 12 V to 15 V V I30 35 VOutput CurrentI O 100mA Maximum Power DissipationCase KT-26 (TO-92) Z Suffix Case KT-47 (SOT-89) F Suffix Case 4303.8-1 (SO-8) D Suffix P D500 350 500 mWJunction TemperatureT JMAX 150 °C Operating Junction Temperature Range T OPR -30 to +85 °C Storage Temperature RangeT STG-40 to +150°CORDERING INFORMATIONDevice MarkingPackageQuantityPacking Style78LXXACZ* 78LXXACZ* SOT-54 1 Kpcs / plastic bags / carton boxIn bulk 78LXXACF*8LXX*SOT-89 5 Kpcs / plastic bags / carton box In bulk 78LXXACF-T1* 8LXX*SOT-891 Kpcs / Reel Embossed tape 12-mm wide 7'' dia.Pin 2 (Common) towards the windung. Perforation on the right.78LXXACD* 78LXXACD* SO-85 Kpcs / plastic bags / carton box In bulk 78LXXACD-R1* 78LXXACD* SO-8500 pcs / Reel Embossed tape 12-mm wide 7'' dia.Pin 1 (Output) face to perforation side of the tape.78LXXACD-R2* 78LXXACD* SO-82.5 Kpcs / Reel Embossed tape 12-mm wide 13'' dia.Pin 1 (Output) face to perforation side of the tape.Note 1:XX indicates nominal voltage*Available in 5, 6, 8, 9, 12 and 15 V devices.78L00AC SeriesPLANETA JSC , 2/13 Fedorovsky Ruchei, Veliky Novgorod, 173004, Russia Ph./Fax: +7–816–2231736 E-mail: planeta@ © August 2001 Rev 1 /~planeta378L05AC ELECTRICAL CHARACTERISTICS(V I = 10 V, I O = 40 mA, C I = 0.33 µF, C O = 0.1 µF, T A = 25 °C unless otherwise noted)CharacteristicSymbol Min Typ Max Unit Output Voltage V O 4.8 5.0 5.2 V Output Voltage,7.0V < V I < 20.0V, 1mA < I O < 40mA V O 4.75 – 5.25 V Line Regulation, 7.0V < V I < 20.0V – – 150mV Load Regulation,1mA < I O < 100mA 1mA < I O < 40mA– – – – 60 30 mVInput Bias Current I IB – – 6 mA Input Bias Current,8.0V < V I < 20.0V, 1mA < I O < 40mA ∆I IB – – 1.5 mA Ripple Rejection,8.0V < V I < 18.0V, I O =40mA, f=120Hz RR 41 – – dB Dropout VoltageV I – V O1.7–V78L06AC ELECTRICAL CHARACTERISTICS(V I = 12 V, I O = 40 mA, C I = 0.33 µF, C O = 0.1 µF, T A = 25 °C unless otherwise noted)CharacteristicSymbol Min Typ Max Unit Output Voltage V O 5.75 6.0 6.25 V Output Voltage,8.5V < V I < 20.0V, 1mA < I O < 40mA V O 5.7 – 6.3 V Line Regulation, 8.5V < V I < 20.0V – – 175mV Load Regulation,1mA < I O < 100mA 1mA < I O < 40mA– – – – 80 40 mVInput Bias Current I IB – – 6 mA Input Bias Current,9.0V < V I < 20.0V, 1mA < I O < 40mA ∆I IB – – 1.5 mA Ripple Rejection,10.0V < V I < 20.0V, I O =40mA, f=120Hz RR 40 – – dB Dropout VoltageV I – V O1.7–V78L00AC SeriesPh./Fax: +7–816–2231736 PLANETA JSC , 2/13 Fedorovsky Ruchei, Veliky Novgorod, 173004, Russia E-mail: planeta@ /~planeta © August 2001 Rev 1478L08AC ELECTRICAL CHARACTERISTICS(V I = 14 V, I O = 40 mA, C I = 0.33 µF, C O = 0.1 µF, T A = 25 °C unless otherwise noted)CharacteristicSymbol Min Typ Max Unit Output Voltage V O 7.7 8.0 8.3 V Output Voltage,10.5V < V I < 23.0V, 1mA < I O < 40mA V O 7.6 – 8.4 V Line Regulation, 10.5V < V I < 23.0V – – 175mV Load Regulation,1mA < I O < 100mA 1mA < I O < 40mA– – – – 80 40 mVInput Bias Current I IB – – 6 mA Input Bias Current,11.0V < V I < 23.0V, 1mA < I O < 40mA ∆I IB – – 1.5 mA Ripple Rejection,13.0V < V I < 23.0V, I O =40mA, f=120Hz RR 37 – – dB Dropout VoltageV I – V O1.7–V78L09AC ELECTRICAL CHARACTERISTICS(V I = 16 V, I O = 40 mA, C I = 0.33 µF, C O = 0.1 µF, T A = 25 °C unless otherwise noted)CharacteristicSymbol Min Typ Max Unit Output Voltage V O 8.6 9.0 9.4 V Output Voltage,12.0V < V I < 24.0V, 1mA < I O < 40mA V O 8.55 – 9.45 V Line Regulation, 12.0V < V I < 24.0V – – 175mV Load Regulation,1mA < I O < 100mA 1mA < I O < 40mA– – – – 90 40 mVInput Bias Current I IB – – 6 mA Input Bias Current,13.0V < V I < 24.0V, 1mA < I O < 40mA ∆I IB – – 1.5 mA Ripple Rejection,15.0V < V I < 25.0V, I O =40mA, f=120Hz RR 37 – – dB Dropout VoltageV I – V O1.7–V78L00AC SeriesPLANETA JSC , 2/13 Fedorovsky Ruchei, Veliky Novgorod, 173004, Russia Ph./Fax: +7–816–2231736 E-mail: planeta@ © August 2001 Rev 1 /~planeta578L12AC ELECTRICAL CHARACTERISTICS(V I = 19 V, I O = 40 mA, C I = 0.33 µF, C O = 0.1 µF, T A = 25 °C unless otherwise noted)CharacteristicSymbol Min Typ Max Unit Output Voltage V O 11.5 12.0 12.5 V Output Voltage,14.0V < V I < 27.0V, 1mA < I O < 40mA V O 11.4 – 12.6 V Line Regulation, 14.5V < V I < 27.0V – – 250mV Load Regulation,1mA < I O < 100mA 1mA < I O < 40mA– – – – 100 50 mVInput Bias Current I IB – – 6.5 mA Input Bias Current,16.0V < V I < 27.0V, 1mA < I O < 40mA ∆I IB – – 1.5 mA Ripple Rejection,15.0V < V I < 25.0V, I O =40mA, f=120Hz RR 37 – – dB Dropout VoltageV I – V O1.7–V78L15AC ELECTRICAL CHARACTERISTICS(V I = 23 V, I O = 40 mA, C I = 0.33 µF, C O = 0.1 µF, T A = 25 °C unless otherwise noted)CharacteristicSymbol Min Typ Max Unit Output Voltage V O 14.4 15.0 15.6 V Output Voltage,17.5V < V I < 30.0V, 1mA < I O < 40mA V O 14.25 – 15.75 V Line Regulation, 17.5V < V I < 30.0V – – 300mV Load Regulation,1mA < I O < 100mA 1mA < I O < 40mA– – – – 150 75 mVInput Bias Current I IB – – 6.5 mA Input Bias Current,19.0V < V I < 30.0V, 1mA < I O < 40mA ∆I IB – – 1.5 mA Ripple Rejection,18.5V < V I < 28.5V, I O =40mA, f=120Hz RR 34 – – dB Dropout VoltageV I – V O1.7–V78L00AC SeriesPh./Fax: +7–816–2231736 PLANETA JSC , 2/13 Fedorovsky Ruchei, Veliky Novgorod, 173004, RussiaE-mail: planeta@ /~planeta © August 2001 Rev 16PACKAGE DIMENSIONS of 78L00ACZ in mmPLASTIC CASE KT-26PACKAGE DIMENSIONS of 78L00ACF in mm78L00AC Series PACKAGE DIMENSIONS of 78L00ACD in mmPLASTIC CASE 4303-8.1PLANETA JSC, 2/13 Fedorovsky Ruchei, Veliky Novgorod, 173004, Russia Ph./Fax: +7–816–2231736E-mail: planeta@ © August 2001 Rev 1 /~planeta7。

合集下载

MEMORY存储芯片78L05中文规格书

MEMORY存储芯片78L05中文规格书


3 Description
The UA78L00 series of fixed-voltage linear regulators is designed for a wide range of applications. These applications include on-card regulation for elimination of noise and distribution problems associated with single-point regulation as well as for voltage regulation in major appliances. In addition, they can be used with power-pass elements to make highcurrent voltage regulators. One of these regulators can deliver up to 100 mA of output current. The internal limiting and thermal-shutdown features of these regulators help to protect the device from overload.
6.2 ESD Ratings
V(ESD) Electrostatic discharge
Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins(1) Charged device model (CDM), per JEDEC specification JESD22-C101, all pins (2)
LM78L05C中文资料

LM78L05C中文资料

3-TERMINAL 0.1A POSITIVE VOLTAGE REGULATORSThis series of fixed-voltage monolithic integrated-circuitvoltage regulators is designed for a wide range ofapplications.These applications include on-card regulation forelimination of noise and distribution problems associatedwith single-point regulation.In addition, they can be used with power-pass elementsto make high current voltage regulators.Each of these regulators can deliver up to 100㎃ of outputcurrent.The internal limiting and thermal shutdown features ofthese regulators make them essentially immune to overload.When used as a replacement for a zener diode-resistor com-bination, an effective improvement in output impedancecan be obtained together with lower-bias current.ORDERING INFORMATIONDevice Marking PackageLM78LXX LM78LXXTO-92 FEATURES LM78L05 /A /C LM78L05 /A /C◇ Output Current Up to 100㎃LM78L05NF805SOT-89◇ No External Components LM78L05AF/CF◇ Internal Thermal Overload Protection LM78L06F~24F806~824◇ Internal Short-Circuit Limiting XX = Output Voltage or Grade◇ Output Voltage of 5V, 6V, 8V, 9V, 10V, 12V, 15V, 18Vand 24VABSOLUTE MAXIMUM RATINGSCharacteristic Symbol Value UnitInput voltage LM78L05 /A/C∼ LM78L10V I30V LM78L12 ∼ LM78L1835LM78L2440Operating junction temperature Topr0 ∼ +150℃Storage temperature Tstg-65 ∼ +150Soldering temperature and time Tsol260/10secMar. 2006 - Rev 06 HTCRECOMMENDED OPERATING CONDITIONSMin.Max.UnitInput Voltage V I7LM78L05 / A / C20V LM78L06820LM78L0810.523LM78L0911.524LM78L1012.525LM78L1214.527LM78L1517.530LM78L1820.533LM78L2426.539Output current,Io100㎃perating virtual junction temperature, 0125℃TYPICAL APPLICATIONNotes1. To specify an output voltage, substitute voltage for "XX"2. Bypass capacitors are recommended for optimum stability and transient response and should be located as close as possible to the regulators.LM78L05 ELECTRICAL CHARACTERISTICS(At specified virtual junction temperature, V I=10V, I O=40㎃ (unless otherwise noted)Characteistic Symbol Test condition *Min.Typ.Max.UnitOutput voltage **V OUT25℃ 4.85 5.21㎃≤I O≤40㎃0℃ ∼ 125℃4.7555.25V 7V≤V I≤20V1㎃≤I O≤70㎃ 4.755 5.25Line regulation Reg line 7V≤V I≤20V25℃32150㎷8V≤V I≤20V26100Load regulation Reg load 1㎃≤I O≤100㎃25℃1560㎷1㎃≤I O≤40㎃830Bias current I B25℃ 3.86㎃125℃ 5.5Bias current change△I B9V≤V I≤20V0℃ ∼ 125℃ 1.5㎃1㎃≤I O≤40㎃0.1 Output noise voltage V N10Hz≤f≤100kHz25℃42㎶Ripple rejection RR 8V≤V I≤18Vf=120Hz25℃4149㏈Dropout voltage V D25℃ 1.7VNotes*. Pulse testing techniques are used to maintain the junction temperature as close to theambient temperature as possible.Thermal effects must be taken into account separately.All characteristics are measured with a 0.33㎌ capacitor across the input and a 0.1㎌capacitor across the output.**. This specification applies only for DC power dissipation permitted by absolute maximumratings.Mar. 2006 - Rev 06 HTCLM78L05A ELECTRICAL CHARACTERISTICS(At specified virtual junction temperature, V I=10V, I O=40㎃ (unless otherwise noted)Characteistic Symbol Test condition *Min.Typ.Max.UnitOutput voltage **V OUT25℃ 4.95 5.11㎃≤I O≤40㎃0℃ ∼ 125℃4.955.1V 7V≤V I≤20V1㎃≤I O≤70㎃ 4.95 5.1Line regulation Reg line 7V≤V I≤20V25℃550㎷8V≤V I≤20V325Load regulation Reg load1㎃≤I O≤100㎃25℃1560㎷1㎃≤I O≤40㎃830Bias current I B25℃ 3.86㎃125℃ 5.5Bias current change△I B9V≤V I≤20V0℃ ∼ 125℃1.5㎃1㎃≤I O≤40㎃0.1Output noise voltage V N10Hz≤f≤100kHz25℃42㎶Ripple rejection RR 8V≤V I≤18Vf=120Hz25℃4149㏈Dropout voltage V D25℃ 1.7VNotes*. Pulse testing techniques are used to maintain the junction temperature as close to theambient temperature as possible.Thermal effects must be taken into account separately.All characteristics are measured with a 0.33㎌ capacitor across the input and a 0.1㎌capacitor across the output.**. This specification applies only for DC power dissipation permitted by absolute maximumratings.Mar. 2006 - Rev 06 HTCLM78L05C ELECTRICAL CHARACTERISTICS(At specified virtual junction temperature, V I=10V, I O=40㎃ (unless otherwise noted)Characteistic Symbol Test condition *Min.Typ.Max.UnitOutput voltage **V OUT25℃ 4.955 5.051㎃≤I O≤40㎃0℃ ∼ 125℃4.9555.05V 7V≤V I≤20V1㎃≤I O≤70㎃ 4.955 5.05Line regulation Reg line 7V≤V I≤20V25℃550㎷8V≤V I≤20V325Load regulation Reg load1㎃≤I O≤100㎃25℃1550㎷1㎃≤I O≤40㎃825 Bias current I B25℃ 3.86㎃125℃ 5.5Bias current change△I B9V≤V I≤20V0℃ ∼ 125℃ 1.5㎃1㎃≤I O≤40㎃0.1 Output noise voltage V N10Hz≤f≤100kHz25℃42㎶Ripple rejection RR 8V≤V I≤18Vf=120Hz25℃4149㏈Dropout voltage V D25℃ 1.7VNotes*. Pulse testing techniques are used to maintain the junction temperature as close to theambient temperature as possible.Thermal effects must be taken into account separately.All characteristics are measured with a 0.33㎌ capacitor across the input and a 0.1㎌capacitor across the output.**. This specification applies only for DC power dissipation permitted by absolute maximumratings.Mar. 2006 - Rev 06 HTCLM78L06 ELECTRICAL CHARACTERISTICS(At specified virtual junction temperature, V I=10V, I O=40㎃ (unless otherwise noted)Characteistic Symbol Test condition *Min.Typ.Max.UnitOutput voltage **V OUT25℃ 5.756 6.251㎃≤I O≤40㎃0℃ ∼ 125℃5.766.3V 8V≤V I≤20V1㎃≤I O≤70㎃ 5.76 6.3Line regulation Reg line 8V≤V I≤20V25℃35175㎷9V≤V I≤20V29125Load regulation Reg load 1㎃≤I O≤100㎃25℃1680㎷1㎃≤I O≤40㎃940Bias current I B25℃ 3.96㎃125℃ 5.5Bias current change△I B9V≤V I≤20V0℃ ∼ 125℃1.5㎃1㎃≤I O≤40㎃0.1Output noise voltage V N10Hz≤f≤100kHz25℃46㎶Ripple rejection RR 9V≤V I≤19V25℃4048㏈f=120HzDropout voltage V D25℃ 1.7VNotes*. Pulse testing techniques are used to maintain the junction temperature as close to theambient temperature as possible.Thermal effects must be taken into account separately.All characteristics are measured with a 0.33㎌ capacitor across the input and a 0.1㎌capacitor across the output.**. This specification applies only for DC power dissipation permitted by absolute maximumratings.Mar. 2006 - Rev 06 HTCLM78L08 ELECTRICAL CHARACTERISTICS(At specified virtual junction temperature, V I=14V, I O=40㎃ (unless otherwise noted)Characteistic Symbol Test condition *Min.Typ.Max.Unit25℃7.788.3Output voltage **V OUT1㎃≤I O≤40㎃0℃ ∼ 125℃7.688.4V10.5V≤V I≤23V1㎃≤I O≤70㎃7.688.4Line regulation Reg line10.5V≤V I≤23V25℃42175㎷11V≤V I≤23V36125Load regulation Reg load1㎃≤I O≤100㎃25℃1880㎷1㎃≤I O≤40㎃1040Bias current I B25℃46㎃125℃ 5.5Bias current change△I B11V≤V I≤23V0℃ ∼ 125℃ 1.5㎃1㎃≤I O≤40㎃0.1Output noise voltage V N10Hz≤f≤100kHz25℃54㎶Ripple rejection RR13V≤V I≤23V25℃3746㏈f=120HzDropout voltage V D25℃ 1.7VNotes*. Pulse testing techniques are used to maintain the junction temperature as close to theambient temperature as possible.Thermal effects must be taken into account separately.All characteristics are measured with a 0.33㎌ capacitor across the input and a 0.1㎌capacitor across the output.**. This specification applies only for DC power dissipation permitted by absolute maximumratings.Mar. 2006 - Rev 06 HTCLM78L09 ELECTRICAL CHARACTERISTICS(At specified virtual junction temperature, V I=16V, I O=40㎃ (unless otherwise noted)Characteistic Symbol Test condition *Min.Typ.Max.Unit25℃8.699.4Output voltage **V OUT1㎃≤I O≤40㎃0℃ ∼ 125℃8.5599.45V12V≤V I≤24V1㎃≤I O≤70㎃8.5599.45Line regulation Reg line12V≤V I≤24V25℃45175㎷13V≤V I≤24V40125Load regulation Reg load1㎃≤I O≤100㎃25℃1990㎷1㎃≤I O≤40㎃1140Bias current I B25℃ 4.16㎃125℃ 5.5Bias current change△I B13V≤V I≤24V0℃ ∼ 125℃ 1.5㎃1㎃≤I O≤40㎃0.1Output noise voltage V N10Hz≤f≤100kHz25℃58㎶Ripple rejection RR13V≤V I≤23V25℃3845㏈f=120HzDropout voltage V D25℃ 1.7VNotes*. Pulse testing techniques are used to maintain the junction temperature as close to theambient temperature as possible.Thermal effects must be taken into account separately.All characteristics are measured with a 0.33㎌ capacitor across the input and a 0.1㎌capacitor across the output.**. This specification applies only for DC power dissipation permitted by absolute maximumratings.Mar. 2006 - Rev 06 HTCLM78L10 ELECTRICAL CHARACTERISTICS(At specified virtual junction temperature, V I=17V, I O=40㎃ (unless otherwise noted)Characteistic Symbol Test condition *Min.Typ.Max.UnitOutput voltage **V OUT25℃9.61010.41㎃≤I O≤40㎃0℃ ∼ 125℃9.51010.5V 13V≤V I≤25V1㎃≤I O≤70㎃9.51010.5Line regulation Reg line 13V≤V I≤25V25℃51175㎷14V≤V I≤25V42125Load regulation Reg load 1㎃≤I O≤100㎃25℃2090㎷1㎃≤I O≤40㎃1140Bias current I B25℃ 4.26㎃125℃ 5.5Bias current change△I B 14V≤V I≤25V0℃ ∼ 125℃1.5㎃1㎃≤I O≤40㎃0.1Output noise voltage V N10Hz≤f≤100kHz25℃62㎶Ripple rejection RR 15V≤V I≤25Vf=120Hz25℃3744㏈Dropout voltage V D25℃ 1.7VNotes*. Pulse testing techniques are used to maintain the junction temperature as close to theambient temperature as possible.Thermal effects must be taken into account separately.All characteristics are measured with a 0.33㎌ capacitor across the input and a 0.1㎌capacitor across the output.**. This specification applies only for DC power dissipation permitted by absolute maximumratings.Mar. 2006 - Rev 06 HTCLM78L12 ELECTRICAL CHARACTERISTICS(At specified virtual junction temperature, V I=19V, I O=40㎃ (unless otherwise noted)Characteistic Symbol Test condition *Min.Typ.Max.UnitOutput voltage **V OUT25℃11.51212.51㎃≤I O≤40㎃0℃ ∼ 125℃11.41212.6V 14V≤V I≤27V1㎃≤I O≤70㎃11.41212.6Line regulation Reg line 14.5V≤V I≤27V25℃55250㎷16V≤V I≤27V49200Load regulation Reg load 1㎃≤I O≤100㎃25℃22100㎷1㎃≤I O≤40㎃1350Bias current I B25℃ 4.3 6.5㎃125℃6Bias current change△I B 16V≤V I≤27V0℃ ∼ 125℃1.5㎃1㎃≤I O≤40㎃0.1Output noise voltage V N10Hz≤f≤100kHz25℃70㎶Ripple rejection RR 15V≤V I≤25Vf=120Hz25℃3742㏈Dropout voltage V D25℃ 1.7VNotes*. Pulse testing techniques are used to maintain the junction temperature as close to theambient temperature as possible.Thermal effects must be taken into account separately.All characteristics are measured with a 0.33㎌ capacitor across the input and a 0.1㎌capacitor across the output.**. This specification applies only for DC power dissipation permitted by absolute maximumratings.Mar. 2006 - Rev 06 HTCLM78L15 ELECTRICAL CHARACTERISTICS(At specified virtual junction temperature, V I=23V, I O=40㎃ (unless otherwise noted)Characteistic Symbol Test condition *Min.Typ.Max.UnitOutput voltage **V OUT25℃14.41515.61㎃≤I O≤40㎃0℃ ∼ 125℃14.251515.75V 17.5V≤V I≤30V1㎃≤I O≤70㎃14.251515.75Line regulation Reg line 17.5V≤V I≤30V25℃65300㎷19V≤V I≤30V58250Load regulation Reg load 1㎃≤I O≤100㎃25℃25150㎷1㎃≤I O≤40㎃1575Bias current I B25℃ 4.2 6.5㎃125℃6Bias current change△I B 19V≤V I≤30V0℃ ∼ 125℃1.5㎃1㎃≤I O≤40㎃0.1Output noise voltage V N10Hz≤f≤100kHz25℃82㎶Ripple rejection RR 18.5V≤V I≤28.5Vf=120Hz25℃3744㏈Dropout voltage V D25℃ 1.7VNotes*. Pulse testing techniques are used to maintain the junction temperature as close to theambient temperature as possible.Thermal effects must be taken into account separately.All characteristics are measured with a 0.33㎌ capacitor across the input and a 0.1㎌capacitor across the output.**. This specification applies only for DC power dissipation permitted by absolute maximumratings.Mar. 2006 - Rev 06 HTC36LM78L18 ELECTRICAL CHARACTERISTICS(At specified virtual junction temperature, V I=26V, I O=40㎃ (unless otherwise noted)Characteistic Symbol Test condition *Min.Typ.Max.UnitOutput voltage **V OUT25℃17.31818.71㎃≤I O≤40㎃0℃ ∼ 125℃17.11818.9V 20.5V≤V I≤33V1㎃≤I O≤70㎃17.11818.9Line regulation Reg line 20.5V≤V I≤33V25℃70360㎷22V≤V I≤33V64300Load regulation Reg load 1㎃≤I O≤100㎃25℃27180㎷1㎃≤I O≤40㎃1990Bias current I B25℃ 4.7 6.5㎃125℃6Bias current change△I B 22V≤V I≤33V0℃ ∼ 125℃1.5㎃1㎃≤I O≤40㎃0.1Output noise voltage V N10Hz≤f≤100kHz25℃82㎶Ripple rejection RR 21.5V≤V I≤31.5Vf=120Hz25℃3236㏈Dropout voltage V D25℃ 1.7VNotes*. Pulse testing techniques are used to maintain the junction temperature as close to theambient temperature as possible.Thermal effects must be taken into account separately.All characteristics are measured with a 0.33㎌ capacitor across the input and a 0.1㎌capacitor across the output.**. This specification applies only for DC power dissipation permitted by absolute maximumratings.Mar. 2006 - Rev 06 HTC37LM78L24 ELECTRICAL CHARACTERISTICS(At specified virtual junction temperature, V I=32V, I O=40㎃ (unless otherwise noted)Characteistic Symbol Test condition *Min.Typ.Max.UnitOutput voltage **V OUT25℃2324251㎃≤I O≤40㎃0℃ ∼ 125℃22.82425.2V 26.5V≤V I≤39V1㎃≤I O≤70㎃22.82425.2Line regulation Reg line 26.5V≤V I≤39V25℃95480㎷29V≤V I≤39V78400Load regulation Reg load 1㎃≤I O≤100㎃25℃41240㎷1㎃≤I O≤40㎃28120Bias current I B25℃ 4.8 6.5㎃125℃6Bias current change△I B28V≤V I≤39V0℃ ∼ 125℃ 1.5㎃1㎃≤I O≤40㎃0.1 Output noise voltage V N10Hz≤f≤100kHz25℃82㎶Ripple rejection RR 27.5V≤V I≤37.5Vf=120Hz25℃3033㏈Dropout voltage V D25℃ 1.7VNotes*. Pulse testing techniques are used to maintain the junction temperature as close to theambient temperature as possible.Thermal effects must be taken into account separately.All characteristics are measured with a 0.33㎌ capacitor across the input and a 0.1㎌capacitor across the output.**. This specification applies only for DC power dissipation permitted by absolute maximumratings.Mar. 2006 - Rev 06 HTC38。

78L05中文资料_数据手册_参数

78L05中文资料_数据手册_参数

万联芯城电子元器件采购网代理长电，顺络，星海，先科 ST 等 一线电子元器件品牌产品，产品范围包括 IC 集成电路，电阻电 容，二三极管等，保证所售商品均为原装现货库存，万联芯城专 为客户电子元器件解决一站式物料报价，有明显优势，点击进入 万联芯城
LM78LXX系列三端正稳压器一般描述 LM78LXX系列三端正向稳压器是可用几个固定的输出电压使他们在广泛的应用中 有用.当用作齐纳二极管/电阻组合替代，LM78LXX usu-盟友导致有效的输出阻抗改善两个数量级以及更低的静态电流.这 些监管机构可以提供当地的卡规，消除与单点规则相关的分配问题 - 灰.可用电压允许LM78LXX用于逻辑系统，仪器仪 表，HiFi等固态电子设备. LM78LXX采用塑料TO-92（Z）封装，塑料SO-8（M）封装和芯片尺寸封装 （8-Bump micro SMD）采用美国国家半导体的微型SMD封装技术.如果有足够的散热片，肝脏100毫安输出电流.电流限制包括在内将峰 值输出电流限制在安全值.安全区域pro-提供对输出晶体管的检测以限制内部功耗.如果内部功耗变得太大高散热提供， 热关断CIR - cuit接管防止IC过热.特征 ? LM78L05采用微型SMD封装 ? 输出电压容差 在整个温度 范围内的 ± 5％范围 ?输 出电流100毫安 ?内部热过载保护 ?输出晶体管安全区域保护 ?内部短路电流限制 ?提供塑料TO-92和塑料SO-8低轮廓包 ?没 有外部元件 ?输出电压为5.0V，6.2V，8.2V，9.0V，12V，15V连接图 SO-8塑料（M） （窄体） DS007744-2顶视图 8凹凸 微型SMD DS007744-24顶视图 （凹凸面朝下） （TO-92）塑料包装（Z） DS007744-3底视图微型SMD标记方向 DS007744-33顶视图 可用性和规格.功耗（注5）内部限制输入电压 35V储存温度 -65?C至+150?C工作结温 SO-8 0?C至125?C微型SMD -40?C至 85?C焊接信息红外或对流（20秒） 235C波峰焊接（10秒） 260?C（提前期） ESD敏感度（注2）千伏 LM78LXX电气特性 标准字体的限制是T J =25?C，粗体字ap- SO-8封装的工作温度范围为0?C至125?C，微型SMD封装的工作温度范围为-40?C 至85?C.限制由产品保证，使用标准的统计质量控制（SQC）方法进行测试或相关技术.除非另有说明：I ? = 40毫安，C I =0.33μF，C0 =0.1μF. LM78L05除非另有规定，V IN = 10V符号参数条件敏典型马克斯单位 V ?输出电压 4.8五 5.2 V 7V ≤V IN≤20V 1毫安 ≤我 O≤40 mA （注3） 4.75 5.25 1毫安 ≤我 O≤70 mA （注3） 4.75 5.25 ΔV ?线路调整 7V ≤V IN≤20V 18 75毫伏 8V ≤V IN≤20V 10 54 ΔV ?负载调节 1毫安 ≤我 O≤100 mA 20 60 1毫安 ≤我 O≤40 mA五三十一世 Q 静态电流 3五 ΔI Q静态电流变化 8V ≤V IN≤20V 1.0 1毫安 ≤我 O≤40 mA 0.1 V ?输出噪声电压 f = 10Hz至100kHz （注 4） 40 μV波纹拒绝 f = 120Hz 8V ≤V IN≤16V 47 62 D b一世 PK峰值输出电流 140嘛平均输出电压温度系数一世 O = 5mA -0.65毫伏/℃ V IN （小）输入电压的小值保持线路规定所需 6.7 7 V θ JA热阻 （8凹凸微型SMD） 230.9 C / W LM78L62AC除非另有规定，V IN = 12V符号参数条件敏典型马克斯单位 V ?输出电压 5.95 .2 6.45 V 8.5V ≤V IN≤20V 1毫 安 ≤我 O≤40 mA （注3） 5.9 6.5 1毫安 ≤我 O≤70 mA （注3） 5.9 6
78L05中文资料

78L05中文资料

TO-92 SOT-891. VOUT2. GND3. GND4. NC5. NC6. GND7. GND8.VINSOP-8CYT78L05GND10uF 10uF最大的额定值:参数符号 额定值 单位功耗 P 0.75 W 输入电压 V IN 18V 封装热阻抗 ӨJA 150(TO-92) ℃/W 烙铁焊接温度 (10秒) T LEAD 260℃ 工作温度范围 T J 0 to +125 ℃ 存储温度 T STG-65 to +150℃静电防护V ESD 2.7KV电性能参数：VIN = 10V; IOUT = 10mA; CIN = 0.33µF; COUT = 0.1µF TJ = 25°C; 有特殊说明的除外。

符号参数测试条件最小值典型值最大值单位V OUT 输出电压4.8 55.2 V△V OUT /V OUT 空载调整率 7V ≤ V IN ≤ 18V -- 11 45 △V OUT /V OUT负载调整率(5) 1mA ≤ I OUT ≤ 100mA -- 5 50 mVI Q 静态电流 -- 4.3 68V ≤ V IN ≤ 18V -- 1.1 -- △I Q 静态电流调整率 1mA ≤ I OUT ≤ 40mA--0.13--mA△V IN /V OUT输出纹波抑制 F=120Hz , 8V ≤ V IN ≤16V -- 62 -- dB I PK 最大输出电流 -- 150 -- mA△V OUT /△T 输出电压温度系数 I OUT =5mA --0.66 -- MV/℃V IN (Min) 空载最小输入电压-- 6.1 6.4 V静态电流与输入电压静态电流嗻mA 嗼输入电压（V ） 结温（℃） 静态电流嗻mA 嗼静态电流与结温压差与结温压差嗻V 嗼结温（℃） 压差：△V OUT ＝2％压差与输出电流压差嗻V 嗼输出电流（mA ）纹波抑制纹波抑制嗻dB 嗼封装尺寸图: TO-92封装尺寸图: SOP-8尺寸英制（in ） 公制(mm) 编号 最小 最大最小 最大A 0.175 0.205 4.445 5.207B 0.170 0.210 4.318 5.334 E 0.500 0.610 12.70 15.50 F 0.016 0.021 0.407 0.533 G 0.045 0.055 1.143 1.397 H 0.095 0.105 2.413 2.667 J 0.080 0.105 2.032 2.667 K0.125 0.165 3.175 4.191尺寸英制（in ） 公制(mm) 编号 最小 最大最小 最大A 0.05320.0688 0.35 1.75 A1 0.00400.0098 0.10 0.25B 0.01300.0200 0.33 0.51 B1 0.050BSC 1.27BSCC 0.00750.0098 0.19 0.25D 0.18900.1968 4.80 5.00 H 0.22840.2440 5.80 6.20 E0.14970.1574 3.80 4.00封装尺寸图: SOT-89英制（in）公制(mm)编号最小最大最小最大A 0.173 0.181 4.400 4.600B 0.159 0.167 4.050 4.250C 0.067 0.075 1.700 1.900D 0.051 0.059 1.300 1.500E 0.094 0.102 2.400 2.600F 0.035 0.047 0.890 1.200G 0.118REF 3.00REFH 0.059REF 1.50REFI 0.016 0.020 0.400 0.520J 0.055 0.063 1.400 1.600K 0.014 0.016 0.350 0.410L 10°TYP 10°TYPM 0.028REF 0.70REF。