胶带产品说明书A

Page 1/2 Product:Product group:General descriptionNitto D9605 series are double-coated tapes with a polyester carrier coated with an aggressive acrylic adhesive used for mounting of different types of plastics.ConstructionCharacteristicsD9605 series are heavy duty multi-purpose double-coated tapes with a high adhesion level on different substrates such as plastics, foams and metals. The tapes are suitable for rough surface bonding.The PET carrier provides dimensional stability resulting in reduced elongation and shrinkage.D9605 series are available in bobbin shape.ApplicationNitto D9605 series are used for mounting decorative profiles in furniture industry (trim mounting), cable ducts. Available in bobbin shapes designed for continuous application process.Suitable for mounting price information holders and plastic parts in sign & nameplate markets for marketing devices (Point Of Sales).Features- high adhesion on different substrates & rough surfaces - high temperature resistance - high holding power - easy processing - bobbin shape - RoHS compliant- Modified acrylic adhesive - Polyester carrier- Modified acrylic adhesive - Release linerEdition: September 2013D9605 series Double Coated TapesGeneral conditions of use and precautions: The properties of the product might be adversely affected by various elements such as composition, condition and surface of and impurities in or on the substrate, temperature and humidity during storage and the surrounding environment at and after application and time of exterior use.When the product is used in combination with another material or process, the user shall assure the compatibility of the product in such combination and whether this combination results in the expected performance. The same principle applies in the event of product use in extreme conditions or circumstances, whether at or after the moment of application, including extended exposure to sunlight or extreme temperatures and pressure. Packaging, transport and storage:During transport and storage the product should always be protected against direct sunlightand extremes in temperature and humidity and contained in its original packaging. Once removed from its packaging, it should be promptly applied and remain shielded from direct sunlight and extreme temperature as well as protected against dust and other impurities.Liability:Except for its wilful misconduct, Nitto Europe’s liability shall be limited to a replacement, a reimbursement or an additional delivery of the product, and shall not exceed the purchase price of the products. In no event shall Nitto be liable in respect of any indirect or consequential damages, including loss of profits.The above limitations of liability shall equally apply if Nitto Europe has assisted in any manner with the selection, treatment or application of the product. Product information:This datasheet provides a general description of the product properties and application scope. Full technical details in connection with this product are presented in the customer product specification, which is available upon request.Please be advised that the information reflected in this datasheet is subject to change and the product described herein may be modified or discontinued without notice.For your local Nitto Europe sales office, please visit our web site: Copyright © 2013 NITTO EUROPE NV. All rights reserved.Nitto Europe NV has obtained following certificates:- ISO 9001- ISO 14001- ISO/TS 16949Please check our website for applicable scopeIf you require additional information on technical properties and application as well as product sampling or testing, please contact your local Nitto Europe sales office.Edition: September 2013Code: DS/01.11/E4 D9605 series ENG This datasheet replaces all previous versionsTechnical PropertiesGeneral physical propertiesTypical Value Test MethodAdhesive type Modified acrylic adhesiveTape thickness* 0.220 mm EN 1942Release liner D9605: Siliconised havana paper (90 g/m²)D9605S: Siliconised white PE coated paper (125 g/m²)Carrier type Polyester (0.050 mm)Adhesion to BA steel 2000 cN/20mm EN 1939Release value 30 cN/50mm Nitto Europe Test MethodStatic shear 1 mm/3h EN 1943Transport and storage conditions Temperature 15 to 30°CRelative humidity 40 to 75% RH* Tape thickness = Total thickness without linerDetails from the test methods are described on the customer product specification.Performance propertiesAdhesion in cN/20mm EN 1939PMMA PC ABS PP Glass2000 2300 1800 700 2300Weight Added Peel Off (WAPO) 2 h at 60°C, width 20mm, 100gPP 16 mm/2h ABS 13 mm/2h BA 3 mm/2hDynamic Shear 350 N/4cm² Tested after 15 min., 300mm/min.Saft test (Shear Adhesion Failure Temperature) 185 °C +0,5°C/min., 15x15mm, 200gWarrantyThe product is guaranteed to be free from defect in material and workmanship at the time ofdelivery and will be suitable for use for a period of 6 months thereafter, subject to the conditionsset out herein.Application guidelines- Keep the tape in its original packaging until use.- For optimum results, an even rub down pressure must be applied to the taped area to createthe best possible adhesion between tape and the substrates.- Remove the liner prior to usage.- The tape should be applied to clean and dry surfaces.- The best application conditions are obtained at a temperature between 15 °C and 40 °C.Double Coated Tapes - D9605 seriesPage 2/2。

醋酸布胶带规格书一、引言醋酸布胶带是一种常见的胶带产品，在许多领域中得到广泛应用。

本文将介绍醋酸布胶带的规格及其相关信息。

二、规格1. 材质：醋酸布胶带的主要材质是醋酸纤维布和橡胶胶粘剂。

醋酸纤维布具有良好的耐热性和耐化学腐蚀性能，橡胶胶粘剂具有优异的粘附力。

2. 颜色：醋酸布胶带的常见颜色有白色、黑色、黄色、红色、蓝色等多种选择，以满足不同用户的需求。

3. 尺寸：醋酸布胶带的宽度通常为15mm、18mm、24mm、36mm等，长度一般为10米、20米、50米等。

4. 厚度：醋酸布胶带的厚度一般在0.15mm至0.25mm之间，可根据用户需求进行定制。

5. 粘附力：醋酸布胶带的粘附力是衡量其粘结性能的重要指标，通常在1.5N/25mm至3.5N/25mm之间。

三、特性1. 耐热性：醋酸布胶带具有良好的耐高温性能，可以在-10℃至80℃的温度范围内长时间使用。

2. 耐化学腐蚀性：醋酸布胶带能够耐受一定的化学腐蚀，适用于一些特殊环境下的粘接和固定。

3. 环保性：醋酸布胶带采用的材料对环境无害，不含有害物质，符合国家相关环保标准。

4. 粘附力稳定：醋酸布胶带的粘附力在长时间使用后也能保持相对稳定，不易松动或脱落。

四、应用领域1. 电子电器行业：醋酸布胶带常用于电子电器产品的固定和绝缘，如电线电缆的包裹和固定，电路板的粘接等。

2. 汽车制造业：醋酸布胶带可以用于汽车内饰件的固定，如车门饰板、仪表板等的安装，具有良好的耐高温性能。

3. 建筑行业：醋酸布胶带可用于建筑材料的固定和封闭，如门窗的密封胶带、管道的绑扎等。

4. 包装行业：醋酸布胶带常用于包装箱的封口，具有良好的粘接性能和抗撕裂性能。

5. 其他领域：醋酸布胶带还可以应用于航空航天、化工、家具等领域，满足各种固定、封闭和修补的需求。

五、质量标准1. 醋酸布胶带的生产质量应符合国家相关标准，保证使用过程中的安全性和可靠性。

2. 在质量检测过程中，需要对醋酸布胶带的外观、粘附力、耐热性等指标进行检测，确保产品符合规格要求。

3M9270胶带操作指南
一. 操作：
1. 表面清洁：
粘结表面须保持绝对清洁干燥，一般清洁可用无纤维脱落的布蘸以50％的酒精，异丙醇 , 丙酮或甲苯溶液加以擦洗，经溶剂清洁的表面须待溶剂彻底发挥后方可用胶带粘贴。

2. 胶带粘贴：
操作时应避免手指与胶面的接触，胶带于零件粘贴后须用力压，建议用滚筒（7 公斤左右) 或刮板，以保证胶面的充分接触和润湿。

3. 环境要求：
操作环境应保持清洁干燥，温度以21-----38 摄氏度为佳，避免 10 摄氏度以下的操作温度，对于防擦条和硬标牌等部件的粘贴，建议使用烘箱预热部件至32---38 摄氏度后再粘贴至车身 ( 尤其在温度较低的操作环境中)。

二. 说明
1. 胶带与零件粘贴后需放置72 小时方可达到最大粘结力的95％
以上。

2. 胶带应存放在低温干燥处，在21 摄氏度，50％相对湿度的环境中
可存放一年。

3 Health Care 3M CanadaPost Office Box 5757 London,Ontario N6A4T1 1-800-364-3577/healthcare 3M,Scotchcast and Primacast are trademarks of 3M.Used under license in Canada.Printed in Cannada Copyright ©3M 2003. All rights reserved.0311 MS18559 E3M Immobilization Products Benefits and ApplicationsCasting Splinting Accessories3InnovationXXXXAt 3M Health Care,our full line of immobilization products are designed to offer you superb handling characteristics and reliable performance in all your immobilization applications.XX1Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Casting Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23M ™Scotchcast ™Plus Casting Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . 33M ™Scotchcast ™Poly Casting Tape . . . . . . . . . . . . . . . . . . . . . . . . . . 43M ™Scotchcast ™Soft Cast Casting Tape . . . . . . . . . . . . . . . . . . . . . . . 5The Dip Application Technique . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Splinting Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73M ™Scotchcast ™Conformable Splint . . . . . . . . . . . . . . . . . . . . . . . . . 83M ™Scotchcast ™Custom Length Splint . . . . . . . . . . . . . . . . . . . . . . . 93M ™Scotchcast ™One-Step Splint . . . . . . . . . . . . . . . . . . . . . . . . . . . 103M ™Primacast ™Unpadded Splint . . . . . . . . . . . . . . . . . . . . . . . . . . . 113M ™Primacast ™Splinting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Casting Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133M ™Synthetic Cast Stockinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143M ™Canvas Cast Shoes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143M ™Splint Scissors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153M ™Synthetic Cast Padding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153M ™Reinforcing Strips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17–21XXXX 3M Casting Products2Product BenefitsWater-activated resin lets youcontrol working time according to application needs.High and early strength allows for weight bearing in 20 minutes and provides a durable cast with less chance of breakdown and the need for costly repairs or replacements. Lightweight for easy mobility. Stretches to conform well to contours for a more comfortable,better fitting cast.Porous weave allows the skinto breathe.Available in 11 colours to maximize patient satisfaction.Suggested ApplicationsFor use in the construction of orthopaedic casts.A lightweight,strong and durable casting tape that combines the benefits of a fibreglass casting tape with the handling ease of plaster. Available in 11 colours to meet patient preferences.3Casting3M ™Scotchcast ™Plus Casting Tape4Product BenefitsHighly radiolucent,lightweightand comfortable for your patients. Resilient and hard wearing as you expect from synthetic tapes. Contains no constricting elastic components.Full range of sizes available.Suggested ApplicationsFor use in the construction of orthopaedic casts.Scotchcast poly casting tape is easy to use and mould,and conforms well to body contours,thus reducing the risk ofconstriction.3M ™Scotchcast ™Poly Casting TapeProduct BenefitsFlexible,soft cast allows for mobility to accommodate specific patient requirements. Casting tape is easy to apply and remove for fast application and enhanced patient comfort. The soft,pliable cast edges improve patient comfort.Ideal for use in combination with rigid Scotchcast casting tape,as soft edges provide additional comfort.Suggested ApplicationsFor use in the construction of casts where support is needed but rigid immobilization is not required,or a limited range in motion is desired. Applications include:Sports Medicine:thumb,wrist and ankle sprains Pediatric Orthopaedics:serial casting for club foot treatmentGeneral Orthopaedics: secondary casting,hybrid casting,corsetsOccupational Therapy: removable splintsA fibreglass casting tape that does not setto a completely rigid state,but remainsflexible and soft even when it iscompletely cured.5Casting3M™Scotchcast™Soft Cast Casting Tape6Basic Dip TechniquesFor casting,select and apply the appropriate size 3M ™Synthetic Stockinet and 3M ™Synthetic Cast Padding.Then select the appropriate size roll of casting tape or splint material for your patient.Note:Gloves must be worn while handling the casting tape so resin doesn’t transfer to skin. No gloves are necessary for Scotchcast ™One-Step Splint.Immerse the roll of tape or splint material in room-temperature water (21-24°C). Give three firm squeezes of the roll or splint while it is submerged in water. For splints,blot on a towel to remove excess water. This will give a set time of approximately 3 minutes. For casting material,wrap the limb spirally and overlap by 50%. For splints,apply to the extremity with foam or felt against the skin and wrap with an elastic bandage.Mould and finish the cast or splint as desired. In areas of critical moulding,keep your hands in place for 30 seconds to speed setting.Specialty Dip TechniquesTo shorten set time,use warmer water and squeeze the roll. If the roll orsplint is immersed in water above 27°C,the roll will set more quickly and a slight increase in the amount of heat release may be noted.To lengthen the set time to about four minutes,immerse the roll or splint in cooler water and remove it immediately without squeezing.(If the casting material is not squeezed while submerged in water,there may be a decrease in slipperiness of the tape.)If maximum set time is desired,don’t dip the roll or splint at all. When you are ready to mould,you can use a spray bottle to moisten the cast or splint or simply dip your gloved hand in water. Do not moisten splint after it is wrapped.Note:Set Strength vs Functional StrengthCast or Splint moulding should be performed until materials set,approximately three minutes after activated in water. Cast material will continue to harden until it reaches functional strength,about 20 minutes from the time it’s activated in water.The Dip Application TechniqueXXXX773M Splinting ProductsSplintingProduct BenefitsLow-profile,one-sided felt padding is less bulky so it moulds more easily to the patient for a closer,more conformable fit.All-in-one splint allows for easyapplication and time savings.Faster application increases patient turnaround. Hypoallergenic,water-repellent felt padding dries much more quickly than standard padding.Provides strong,lightweight support in minutes toencourage early patient mobility.Less messy than plaster splintsfor easy application and faster cleanup.Suggested ApplicationsFor use in the construction of common orthopaedic splints.A ready-to-use,highly conformable splint made of layered fibreglass and pre-padded with water-repellent felt forquicker drying. Pre-packaged in a varietyof sizes to meet application needs.3M ™Scotchcast ™Conformable SplintProduct BenefitsSplint can be customized andcut to the exact length needed for less waste and cost-effective product use.Easy-to-use,self-sealing dispenser helps ensure freshness of splinting material.All-in-one splint allows foreasy application and time savings.Faster application increases patient turnaround.Provides strong,lightweight support in minutes toencourage early patient mobility.Hypoallergenic,water-repellent felt padding dries much more quickly than standard padding.Suggested ApplicationsFor use in the constructionof common orthopaedic splints. Ideal for high volume users such as emergency departments.A cut-to-length fibreglass splinting material that is packaged in an easy-to-use,self-sealing system. The splinting material is made of layered fibreglass andis pre-padded with water-repellent felt.Splinting3M ™Scotchcast ™Custom Length SplintProduct BenefitsAll-in-one splint allows for easy application and time savings.Faster application increases patient turnaround.Conformable and mouldable forbetter patient fit.Provides strong,lightweightsupport to encourage early patient mobility.Available in a variety of pre-cut sizes to accommodate a variety of patient sizes and reduce the need to cut and customize splints.Suggested ApplicationsFor use in the construction of common orthopaedic splints.A splint that incorporates foam padding,splint and breathable backing for easy,one-step application. Pre-packaged in avariety of sizes to meet application needs.3M ™Scotchcast ™One-Step SplintProduct BenefitsOffers the speed and strengthyou expect in synthetics,with a water-activated material that sets in approximately 3-4 minutes with adequate functional strength. Provides a plaster-like conformability for easy moulding and patient fit.Provides superior radiolucency for easier diagnosis from X-rays. Unpadded,for easy customization.Suggested ApplicationsFor use in the construction of common orthopaedic splints.A revolutionary splint technology that offers the speed and strength users expect from synthetic splints with the conformability and feel of plaster.Available unpadded in a variety of sizesto meet patient treatment needs.Splinting3M ™Primacast ™Unpadded SplintAccessories 3M Casting AccessoriesEssential component of a high-quality cast,this synthetic stockinet is intended for use as an underlayment for all standard casting applications. Suitable for use with all casting materials,plaster and synthetic.Product BenefitsStockinet helps reduce water retention and improves patient comfort.Can be used for all standard casting applications and with all casting materials for greater versatility.Available in a variety of widths to meet your casting needs.100% knitted polyester stockinet provides conformability for easy use.Suggested ApplicationsFor use as an underlayment for all standard casting applications.Product BenefitsCanvas shoe design improves the patient’s gait.Protects the cast to reduce need for repair and replacement.Available in a variety of sizes to meet patient needs.Suggested ApplicationsProtecting walking casts that do not have a walking heel attached.A canvas cast shoe designed to improve the patient’s gait while it protects the cast.The shoes are open at the toe and heel,and are available in light beige in a range of sizes.3M ™Synthetic Cast Stockinet3M ™Canvas Cast ShoesAccessories Product BenefitsDesigned for easy and precisecutting of Scotchcast customlength splints.Durable for long-lasting use.Suggested ApplicationsCutting Scotchcast custom lengthsplints.Trimming other 3M splintingmaterials.A pair of scissors designed for use with3M™Scotchcast™Custom Length Splintsor for trimming other 3M splintingmaterials.Product BenefitsSpun polyester padding providesprotection and patient comfort,while helping reduce waterretention for a drier cast.Strong and durable padding iseasy to tear.Conforms easily to body contours.Porous to allow the skin tobreathe.Versatile padding can be used withall casting materials,plaster andsynthetic.Available in a variety of widths tomeet your casting needs.Suggested ApplicationsPadding under casts.A non-woven polyester padding that isporous,highly conformable,strong,yeteasy to tear. Suitable for use with allcasting materials.3M™SplintScissors3M™Synthetic Cast PaddingA reinforcing strip designed to aid in creating strong and durable fibreglass casts,particularly those likely to be exposed to significant challenges of breakdown or stress.Product BenefitsReinforcing strips are easyto use for fast reinforcement of high stress casts.Provide strength and stability to improve cast durability and wear.Wide weave fibreglass mesh allows the cast to breathe better than with closed weave splints for cooler,lighter casts.Suggested ApplicationsReinforcing fibreglass casts,especially those likely to be exposed to significant challenges of breakdown or stress.3M ™Reinforced StripsOrdering Information Ordering Information3M™Scotchcast™Plus Casting TapeCat.No.Description Size Rolls/Case 82001White1" x 2 yds. (2,5 cm x 1,8 m)10 82002White2" x 4 yds. (5 cm x 3,6 m)10 82003White3" x 4 yds. (7,5 cm x 3,6 m)10 82004White4" x 4 yds. (10 cm x 3,6 m)10 82005White5" x 4 yds. (12,5 cm x 3,6 m)10 82002A Black2" x 4 yds. (5 cm x 3,6 m)10 82003A Black3" x 4 yds. (7,5 cm x 3,6 m) 10 82004A Black4" x 4 yds. (10 cm x 3,6 m)10 82005A Black5" x 4 yds. (12,5 cm x 3,6 m)10 82002B Blue2" x 4 yds. (5 cm x 3,6 m)10 82003B Blue3" x 4 yds. (7,5 cm x 3,6 m)10 82004B Blue4" x 4 yds. (10 cm x 3,6 m)10 82005B Blue5" x 4 yds. (12,5 cm x 3,6 m)10 82002G Green2" x 4 yds. (5 cm x 3,6 m)10 82003G Green3" x 4 yds. (7,5 cm x 3,6 m)10 82004G Green4" x 4 yds. (10 cm x 3,6 m)10 82005G Green5" x 4 yds. (12,5 cm x 3,6 m)10 82002J Glow-in-the-dark2" x 4 yds. (5 cm x 3,6 m)10 82003J Glow-in-the-dark3" x 4 yds. (7,5 cm x 3,6 m)10 82004J Glow-in-the-dark4" x 4 yds.(10 cm x 3,6 m)10 82002L Light Blue2" x 4 yds. (5 cm x 3,6 m)10 82003L Light Blue3" x 4 yds. (7,5 cm x 3,6 m)10 82004L Light Blue4" x 4 yds.(10 cm x 3,6 m)10 82005L Light Blue5" x 4 yds. (12,5 cm x 3,6 m)10 82002R Red2" x 4 yds.(5 cm x 3,6 m) 10 82003R Red3" x 4 yds. (7,5 cm x 3,6 m)10 82004R Red4" x 4 yds.(10 cm x 3,6 m) 10 82005R Red5" x 4 yds.(12,5 cm x 3,6 m) 10 82002U Purple2" x 4 yds. (5 cm x 3,6 m)10 82003U Purple3" x 4 yds.(7,5 cm x 3,6 m) 10 82004U Purple4" x 4 yds. (10 cm x 3,6 m)10 82005U Purple5" x 4 yds. (12,5 cm x 3,6 m)10 82002V Bright Green2" x 4 yds. (5 cm x 3,6 m)10 82003V Bright Green3" x 4 yds. (7,5 cm x 3,6 m)10 82004V Bright Green4" x 4 yds. (10 cm x 3,6 m)10 82002W Bright Orange2" x 4 yds. (5 cm x 3,6 m)10 82003W Bright Orange3" x 4 yds. (7,5 cm x 3,6 m)10 82004W Bright Orange4" x 4 yds. (10 cm x 3,6 m)10 82002X Bright Pink2" x 4 yds. (5 cm x 3,6 m)10 82003X Bright Pink3" x 4 yds. (7,5 cm x 3,6 m)10 82004X Bright Pink4" x 4 yds. (10 cm x 3,6 m)10 82005X Bright Pink5" x 4 yds. (12,5 cm x 3,6 m)10Ordering Information3M™Scotchcast™Poly Casting TapeCat.No.Description Size (width)(unstretched length)(stretched length)Rolls/Case86001White1" (2,5 cm) 1.75 yds. (1,6 m) 2.3 yds. (2,1 m)1086002White2" (5,0 cm) 3.5 yds. (3,2 m) 4.5 yds. (4,1 m)1086002R Red2" (5,0 cm) 3.5 yds. (3,2 m) 4.5 yds. (4,1 m)1086002U Purple2" (5,0 cm) 3.5 yds. (3,2 m) 4.5 yds. (4,1 m)1086002B Blue2" (5,0 cm) 3.5 yds. (3,2 m) 4.5 yds. (4,1 m)1086003White3" (7,5 cm) 3.5 yds. (3,2 m) 4.5 yds. (4,1 m)1086003R Red3" (7,5 cm) 3.5 yds. (3,2 m) 4.5 yds. (4,1 m)1086003U Purple3" (7,5 cm) 3.5 yds. (3,2 m) 4.5 yds. (4,1 m)1086003B Blue3" (7,5 cm) 3.5 yds. (3,2 m) 4.5 yds. (4,1 m)1086004White4" (10,1 cm) 3.5 yds. (3,2 m) 4.5 yds. (4,1 m)1086004R Red4" (10,1 cm) 3.5 yds. (3,2 m) 4.5 yds. (4,1 m)1086004U Purple4" (10,1 cm) 3.5 yds. (3,2 m) 4.5 yds. (4,1 m)1086004B Blue4" (10,1 cm) 3.5 yds. (3,2 m) 4.5 yds. (4,1 m)1086005White5" (12,7 cm) 3.5 yds. (3,2 m) 4.5 yds. (4,1 m)1086005R Red5" (12,7 cm) 3.5 yds. (3,2 m) 4.5 yds. (4,1 m)1086005U Purple5" (12,7 cm) 3.5 yds. (3,2 m) 4.5 yds. (4,1 m)1086005B Blue5" (12,7 cm) 3.5 yds. (3,2 m) 4.5 yds. (4,1 m)103M™Scotchcast™Soft Cast Casting TapeCat.No.Description Size Rolls/Case82101White1" x 2 yds. (2,5 cm x 1,8 m)1082102White2" x 4 yds. (5 cm x 3,6 m)1082103White3" x 4 yds. (7,5 cm x 3,6 m)1082104White4" x 4 yds. (10 cm x 3,6 m)1082105White5" x 4 yds. (12,5 cm x 3,6 m)103M™Scotchcast™Conformable SplintCat.No.Size Each/Case 722102" x 10"(5 cm x 25,4 cm)10 723123" x 12"(7,5 cm x 30,5 cm)10 723353" x 35" (7,5 cm x 88,9 cm)10 724154" x 15"(10,2 cm x 38,1 cm)10 724304" x 30" (10,2 cm x 76,2 cm)10 725305" x 30" (12,7 cm x 76,2 cm)103M™Scotchcast™Custom Length Splint (CLS)Cat.No.Description Size Each/Case 760022" CLS2" x 15' roll (5 cm x 457 cm)1 76002D2" CLS Door 6" x 6-1/2"1 760033" CLS3" x 15' roll (7,5 cm x 457 cm)1 76003D3" CLS Door7" x 6-1/2"1 760044" CLS4" x 15' roll (10 cm x 457 cm)1 76004D4" CLS Door8" x 6-1/2"1 760055" CLS5" x 15' roll (12,5 cm x 457 cm)1 76005D5" CLS Door9-1/2" x 6-1/2"13M™Scotchcast™One-Step SplintCat.No.Size Each/Case 76210A2" x 10" (5 cm x 25 cm)10 76312A3" x 12" (7,5 cm x 30 cm)10 76415A4" x 15" (10 cm x 37,5 cm)10 764304" x 30" (10 cm x 75 cm)10 765305" x 30" (12,5 cm x 75 cm)10 863353" x 35" (7,5 cm x 87,5 cm)10 865455" x 45" (12,5 cm x 112,5 cm)103M™Primacast™Unpadded SplintCat.No.Size Each/Case 302102" x 10" (5 cm x 25,4 cm)15 303123" x 12" (7,5 cm x 30,5 cm)15 303353" x 35" (7,5 cm x 88,9 cm)15 304154" x 15" (10,1 cm x 38,1 cm)15 304304" x 30" (10,1 cm x 76,2 cm)15 305305" x 30" (12,7 cm x 76,2 cm)10 305455" x 45" (12,7 cm x 1,1 m)10 306306" x 30" (15,2 cm x 76,2 cm)10 306456" x 45" (15,2 cm x 1,1 m)10 308308" x 30" (20,3 cm x 76,2 cm)10 308458" x 45" (20,3 cm x 1,1 m)10Ordering Information3M ™Synthetic Cast PaddingCat.No.Size Each/BagBags/CaseCMW022" x 4 yds. (5 cm x 3,6 m)204CMW033" x 4 yds. (7,5 cm x 3,6 m)204CMW044" x 4 yds. (10 cm x 3,6 m)204CMW066" x 4 yds.(15 cm x 3,6 m)2043M ™Canvas Cast ShoesCat.No.Description Size Each/Case73040D Infant –673041D Very Small 1, 2, 3673061Small 4, 5, 6373062Medium 6, 7, 8373063Large8, 9, 1033M ™Splint ScissorsCat.No.Each/Case74002103M ™Reinforcing StripsCat.No.Size Each/Case709414" x 18" 10709434" x 36"103M ™Synthetic Cast StockinetCat.No.Size Each/CaseMS011" x 25 yds. (2,5 cm x 22,8 m)1MS022" x 25 yds. (5 cm x 22,8 m)1MS033" x 25 yds. (7,5 cm x 22,8 m)1MS044" x 25 yds. (10,1 cm x 22,8 m)1MS066" x 25 yds. (15,2 cm x 22,8 m)1MS088" x 25 yds.(20,3 cm x 22,8 m)1For more informationFor additional information contact your 3M Health Care Sales Representative,or call the 3M Health Care Customer Helpline at 1-800-364-3577, or visit our web site at /healthcare.。

胶带输送机说明书一、产品概述胶带输送机是一种用于物料输送的机械设备，广泛应用于矿山、建筑工地、港口、冶金、化工等行业。

该设备通过输送带将物料从起点输送到终点，具有输送量大、输送距离长、操作简单等特点。

二、设备结构胶带输送机主要包括输送带、输送辊、传动装置、支撑装置、托辊组、张紧装置、减速器以及电气控制系统。

1. 输送带输送带是胶带输送机的核心部件，用于承载和传输物料。

常用的输送带材料有橡胶、聚氯乙烯（PVC）以及聚酯纤维等。

输送带的选型应根据物料性质、输送距离和工作环境等因素进行合理选择。

2. 输送辊输送辊用于支撑和传输输送带。

输送辊通常分为托辊和顶辊两种形式，其作用是减少输送带与支撑架之间的摩擦，保证输送带的正常运行。

3. 传动装置传动装置包括电动机、减速器和联轴器。

电动机通过减速器和联轴器传递动力给输送辊，从而驱动输送带进行工作。

4. 支撑装置支撑装置用于稳定输送带的运行，常见的支撑装置有托辊组、托板和悬挂装置。

5. 托辊组托辊组包括托辊、托架和轴承等部件，用于支撑输送带并保证其正常运行。

托辊组的选择应根据输送带的承载能力和工作环境等因素进行合理配置。

6. 张紧装置张紧装置用于调整输送带的张紧力度，确保输送带的紧密与稳定。

7. 减速器减速器用于减低电机的转速，并将动力传递给输送辊。

减速器的选择应根据电动机的功率和输送机的工作条件等参数进行合理匹配。

8. 电气控制系统电气控制系统用于控制整个输送机的启停、转向、速度调节等功能，常见的控制方式有按钮控制、PLC控制等。

三、使用方法1. 输送带调整在使用胶带输送机前，需先调整输送带的位置和张紧力度。

通过调整张紧装置和支撑装置，使输送带达到合理的工作状态。

2. 电气连接将输送机的电气设备与电源进行连接，并确保连接牢固、绝缘良好。

根据电气控制系统的具体要求进行接线操作。

3. 输送物料将待输送的物料放置在输送带上，并确保物料均匀分布，避免物料堆积或溢出。

布基胶带规格书引言概述：布基胶带规格书是一种重要的技术文档，用于记录布基胶带的规格和性能要求。

它对于生产制造商和使用者来说都具有重要意义。

本文将从五个大点来阐述布基胶带规格书的内容，包括材料、尺寸、粘性、耐温性和其他要求。

正文内容：1. 材料1.1 布基材料：规格书应详细描述布基材料的种类、材质和质量要求。

如纤维材料的种类，如玻璃纤维、聚酯纤维等；纤维的密度、强度等技术指标。

1.2 胶粘剂：规格书应明确规定所使用的胶粘剂的种类、成分和性能要求。

如粘度、粘接强度、耐化学品等。

2. 尺寸2.1 厚度：规格书应规定布基胶带的厚度范围，以及允许的偏差范围。

2.2 宽度：规格书应规定布基胶带的宽度范围，以及允许的偏差范围。

2.3 长度：规格书应规定布基胶带的长度范围，以及允许的偏差范围。

3. 粘性3.1 粘接力：规格书应规定布基胶带的粘接力要求，包括初粘力和持久粘力。

3.2 剥离力：规格书应规定布基胶带的剥离力要求，以确保在需要时能够轻松剥离。

4. 耐温性4.1 高温性能：规格书应规定布基胶带的耐高温性能要求，以确保在高温环境下不会失去粘性或损坏。

4.2 低温性能：规格书应规定布基胶带的耐低温性能要求，以确保在低温环境下仍能保持粘性。

5. 其他要求5.1 耐化学品性能：规格书应规定布基胶带的耐化学品性能要求，以确保在接触化学品时不会发生腐蚀或损坏。

5.2 耐候性能：规格书应规定布基胶带的耐候性能要求，以确保在户外环境中长时间使用时不会受到紫外线、氧化等因素的影响。

5.3 包装要求：规格书应规定布基胶带的包装要求，如包装方式、包装材料等。

总结：综上所述，布基胶带规格书是一份重要的技术文档，它详细规定了布基胶带的材料、尺寸、粘性、耐温性和其他要求。

制造商和使用者可以根据规格书中的要求来选择、使用和检验布基胶带，以确保其性能和质量符合预期。

通过规范的规格书，布基胶带的生产和使用将更加标准化和可靠。

3m69玻璃布胶带规格书3m69玻璃布胶带规格书一、背景介绍玻璃布胶带是一种高质量的胶带产品，具有耐高温、抗腐蚀、耐候性强等特点，广泛应用于电子、航空、汽车、建筑等领域。

其中，3m69玻璃布胶带是市场上一款备受推崇的产品，广泛用于高温环境下的粘接、固定和封装。

二、产品特点1. 高温耐性：3m69玻璃布胶带具有卓越的高温耐性，能够承受高达180℃的温度，稳定性强，不会因高温而脱胶或变形。

2. 优异的耐候性：该胶带的耐候性能出色，经过长时间的暴露在户外或极端环境下，仍能保持良好的粘接性能和物理性能。

3. 良好的电绝缘性：3m69玻璃布胶带能够有效隔绝电流，防止电磁干扰和电气故障，保证电器设备的正常运行。

4. 耐化学腐蚀性：该胶带不易受化学物质侵蚀，能够抵抗酸碱溶液、油脂、溶剂等腐蚀性介质，延长产品使用寿命。

5. 灵活性佳：3m69玻璃布胶带具有良好的柔韧性，能够适应各种弯曲形状，方便施工和使用。

三、规格参数1. 宽度：3m69玻璃布胶带的宽度可根据需求定制，一般有10mm、15mm、20mm、25mm、30mm等多种规格，满足不同粘接场景的需求。

2. 长度：胶带的长度也可以根据用户要求进行定制，常见的长度为50m、100m、200m等，用户可根据实际使用情况选择合适的尺寸。

3. 厚度：3m69玻璃布胶带的厚度通常为0.18mm，适中的厚度既能够保证良好的耐磨性和结实性，同时又不会过于厚重。

4. 背胶类型：该胶带采用热熔胶作为背胶，具有良好的粘接性能和耐高温性能。

四、使用场景1. 电子领域：3m69玻璃布胶带广泛用于电子器件的封装、固定和连接，能够有效提高电子产品的稳定性和可靠性。

2. 航空航天领域：由于3m69玻璃布胶带具有出色的耐高温性能，因此在航空航天领域被广泛应用于航空器的结构固定、线束绑扎等场景。

3. 汽车制造业：3m69玻璃布胶带在汽车制造业中用于粘接车身结构件、电线束固定等，能够提高汽车的安全性和可靠性。

3M™ Greenback PrintedCircuit Board T ape 851,Green3M™ LED PottingT ape 851J,Green3M™ Circuit PlatingT ape 851L,Green3M™ Polyester/SiliconeT ape 851ST,Green3M™ PolyesterT ape 854,Cream3M™ Circuit PlatingT ape 1280,Red3M™ Polyimide FilmT ape 5413,Amber3M™ High-Temperature TapesProduct Selection Guide3M™ Water-Soluble WaveSolder T ape 5414,Transparent3M™ Low-Static PolyimideFilm T ape 5419,Gold3M™ Linered Low-StaticPolyimide Film T ape 5433,Amber3M™ Polyimide FilmT ape 7412B,Black3M™ High-TemperaturePolyimide T ape 7412P,Amber3M™ High-TemperaturePolyimide T ape 7413D,Amber3M™ General PurposePolyimide Film T ape 7413T,Amber3M™ General PurposePolyimide Film T ape 7413T,Amber3M™ Non-Silicone, AcrylicHigh-Temperature MaskingT ape 7414, Amber3M™ High-TemperatureMasking T ape 7414-53M™ High-TemperatureMasking T ape 7414L-53M™ High-TemperatureMasking T ape 7416A3M™ Low-Static PolyimideFilm T ape 7419, Amber3M™ Linered Low-StaticPolyimide Film T ape 7419L,Amber3M™ High-TemperatureMasking T ape 7437PRegulatory: For regulatory information about this product, contact your 3M representative.Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed.Product Use: Many factors beyond 3M’s control and uniquely within user’s control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application.Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OR TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.Electronics Materials Solutions Division3M Center, Building 224-3N-11 St. Paul, MN 55144-1000 Phone: 1-800-251-8634 Fax: 651-778-4244Web: /electronics 3M is a trademark of 3M Company. All other trademarks are property of their respective owners.© 3M 2019 All rights reserved.60-5005-0092-5 Rev. B。

Looking for more detailed information? This Quick Reference Guide does not replace your vehicle’s Owner’s Manual. If you require additional information or are unsure of a specific issue,we recommend that you always refer to the vehicle’s Owner’s Manual or contact your authorized Hyundai dealer. The information contained in this Quick Reference Guide is correct at the time of printing; however, specifications and equipment can change without notice. No warranty or guarantee is being extended in this Quick Reference Guide, and Hyundai reserves the right to change product specifications and equipment at any time without incurring obligations. Some vehicles are shown with optional equipment.Quick Reference GuideSales Consultant DateSales ManagerDateCustomerDate☐ WAS THE CONDITION OF YOUR VEHICLE (AT DELIVERY) TO YOURSATISFACTION?TheHyundai ELANTRA GTHYUNDAI VEHICLE OWNER PRIVACY POLICYYour Hyundai vehicle may be equipped with technologies and services that use information collected, generated, recorded or stored by the vehicle. Hyundai has created a Vehicle Owner Privacy Policy to explain how these technologies and services collect, use, and share this information.You may read our Vehicle Owner Privacy Policy on the website at https:///owner-privacy-policy.aspxIf you would like to receive a hard copy of our Vehicle Owner Privacy Policy, please contact our Customer Connect Center at:Hyundai Motor AmericaHyundai Customer Connect CenterP.O. Box 20850Fountain Valley, CA 92728-0850**************************************Hyundai's Customer Connect Center representatives are available Monday through Friday, between the hours of 5:00 AM and 7:00 PM PST and Saturday and Sunday between 6:30 AM and 3:00 PM PST (English). For Customer Connect Center assistance in Spanish or Korean, representatives are available Monday through Friday between 6:30 AM and 3:00 PM PST.Tilting the Sunroofclosed.Pull and hold the sunroof control lever backward to the first detent to open the sunroof incrementally.Pull the sunroof control leverbackward past the first detent to slide open the sunroof completely.Push the sunroof control lever forward to the second detent position to close sunroof glass with the sunshade.Front map lamp1Press the lens to turn the map lamp on or off.Front door lamp ( ) 2Lights will turn on when any door is open.Front room lamp ( ) 3Push the switch to turn the room lamp on.Front room lamp ( ) 4Push the switch to turn the room lamp off.INTERIOR LIGHTSHOMELINK WIRELESS CONTROL SYSTEMStandard Programming1. For first time programming, press and hold the two outside buttons ( , ) until the indicator light starts to flash. (to reprogram buttons, skip this step)2. Press and hold the desired button ( , or )and your transmitter’s button at the same time until the Homelink indicator light changes from a slow to a rapid blink.(The transmitter has to be 1 to 3 inches away from the mirror)The desired Homelink button is now programmed.NOTE: If you have a rolling code garage door opener, completeadditional steps:3. Locate the “Learn” or “Smart” button on your garage door opener. Press and release the button and complete Step 4 within 30 seconds.4. Return to the vehicle and press the programmed Homelink button up to 4 times (or until the garaged door operates)For more detailed information, please refer to your Owner’s manual or visit or call (800) 355-3515INSTRUMENT CLUSTER Type A – Standard15SERVICE INTERVAL REMINDER SYSTEMAir intake controlOutside (fresh)air positionRecirculated air positionthe rear window defroster.The climate control system will automatically change to the outside (fresh) air position when:- Defrost-Level or Floor & Defrost Level modes are selected.- The sunroof is openflow as follow.Face-Level Bi-Level Floor-LevelFloor & Defrost-LevelDefrost-Levelcontrol to the warmest setting.1 Fan speed control knob 2 T emperature control knob 5Rear window defroster button 6 A/C (Air conditioning) button 7 Air intake control buttonPosition, tone, priority and advanced sound settings can becustomized in the audio/ navigation unit. Press the SETUP buttonthen select Sound.ress the PHONE( ) button in the head unit or CALL( ) buttonin the steering wheel remote control.2. P air your car after your mobile phone detects the Bluetoothdevice.3. Enter the passkey or accept the authorization popup.4. Connect Bluetooth.NOTE:V ehicle must be parked to complete pairing process.Phone setup (pairing phone) with Navigation1. P ress the CALL( ) button in the steering wheel remote control.2. Pair your car after your mobile phone detects the Bluetooth device.3. Enter the passkey or accept the authorization popup.4. Connect Bluetooth.NOTE:V ehicle must be parked to complete pairing process.Y our vehicle is equipped with Voice Recognition technology which allows drivers to operate their phones without having to take their eyes off the road to minimize distractions.Voice recognition performance may be affected if driving with windows and sun roof open; when the heating-cooling system is on; when driving in a tunnel or when driving on rugged and uneven roads.VOICE RECOGNITION TIPSCalling by Name:1. Press the button.2. Say the following command:• “Call <John Smith>”: Connects the call to John. • “ C all <John Smith> <on Mobile / at Work / at Home / onOther>”: Connects the call to John’s Mobile, Work, Home, or Other phone number.Dialing by Number:1. Press the button. 2. Say “Dial Number.” 3. S ay the desired phone number.For the complete list of commands, refer to your Owner’s Manual.To Answer a Call: • P ress the button on the steering wheel. To Reject a Call: • P ress the button on the steering wheel. To Adjust Ring Volume:To Transfer a Call to the Phone(Private call on handset – do not use while driving): • P ress and hold the button on the steering wheel until theaudio system transfers a call to the phone. To Finish a Call: • P ress the button on the steering wheel.In the following situations you or the other party may have difficulty hearing each other:1. Keep the Bluetooth ® volume to a low level. High level volume may result in distortion and echo.2. When driving on a rough road, high speeds and/or with the window open.3. When the air conditioning vents are facing the microphone and/or when the air conditioning fan is at the max speed.Steering wheel bluetooth ® controlBLUETOOTH ® PHONE CALL OPERATIONAL TIPSBasic features on the map screen1 2 3 4 5 S 6 7 Q tart Guidance ave frequently used address to ind a POI (Point of Interest)iew the vehicle’s current position 11392345671 Address : Set destination by address search.2 P revious destinations : Selectfrom previously inputtedaddresses and POIs.3 O nline Search: Runs onlinesearch.4 POI categories : Select the desired item in the sub-categories.5 G as stations : Select the desireddestinations among thesearched gas stations.Press [NAVusing the [Destination ] menu.2341567896 R restaurants.7 E destination among the searched emergency facilities.8 A ddress Book : Search the destination with the addressbook.9 Coordinates : You can find a destination by entering the coordinates of latitude and longitude.Press [NAVIGATIONWIRELESS CELLULAR PHONE CHARGING SYSTEMCAR SETUP1. Press the SETUP button on the radio.2. Touch the “Phone Projection” icon on screen.3. Select “On” for Android Auto.4. Connect your Android phone to the vehicle USB port. Agree to the notification anddisclaimers on your phone then the “Android Auto” icon will appear confirming the setup.For more detailed information on how to operate Android Auto, please refer to your display audio or navigation manual.For additional Android Auto support, please refer to the Android Auto Support Websitehttps:///androidauto/Android Auto, Google Play, Android, and other marks are trademarks of Google Inc.PHONE SETUPActivate Bluetooth from your mobile device, and connect the USB Cable from your device to the USB port on the vehicle.Phone will prompt you to download the Android Auto app and update other needed apps (i.e. Google Maps™, Google Play Music™, Google Now™).NOTE: Vehicle must be parked.- Location mode setting should be set to High accuracy.- Car and phone setup should be completed in one sitting. If phone setup needs to be resumed, recommend to Force Stop the Android Auto app on the Phone then reopen the app and accept the Disclaimer notifications.REQUIREMENTS:- USB cable- OS Android™ 5.0 or higher - Compatible Android Phone- Data and wireless plan for applicable featuresBEFORE YOU BEGIN:- Android Auto features may operate differently than on your phone.- Message and data charges may apply when using Android Auto.- Android Auto relies on the performance of your phone. If you experience performance issues:- Close all apps and then restart them or - Disconnect and then reconnect your phone- Using the USB cable that was provided with your phone is recommended.your requests.ANDROID AUTO SUPPORThttps:///androidauto/ANDROID AUTO ™CAR SETUP1. Press the SETUP button.2. Touch the “Phone Projection” icon on the screen.3. Touch “iOS” on the Phone Projection Settings screen then touch “On” to enable Apple CarPlay.4. Connect your Apple iPhone to the vehicle USB port then touch ‘OK’ when the pop-up message appears. The Apple CarPlay icon will now appear on the vehicle Home screen confirming the setup.Apple CarPlay, Apple, and other marks are trademarks of Apple Inc.REQUIREMENTS- Apple Lightning ® cable - Latest iOS- iPhone ® 5 or above- Data and wireless plan for applicable featuresBEFORE YOU BEGIN- Apple ® CarPlay features may operate differently than on your phone.- Message and data charges may apply when using Apple CarPlay.- Apple CarPlay relies on the performance of your phone. If you experience performance issues:- Close all apps and then restart them or - Disconnect and then reconnect your phone- Using the Apple Lightning cable that was provided with your phone is recommended.- When Apple CarPlay is active, your voice recognition system is disabled and you will be using Siri ® to make your requests.APPLE CARPLAY ™PHONE SETUPOn your phone, go to Settings > General > CarPlay to allow CarPlay access.On your phone, go to Settings > Siri and ensure Siri is turned ON.automatically asks ‘Who do you want to call’ when the PHONE 5 Using the Lightning cable that came with the phone is recommended.APPLE MUSICTouch the APPLE MUSIC 6 icon to access the Apple Music screen. APPLE MAPSTouch the APPLE MAPS 7 icon to access the Apple Map screen. MESSAGESTouch the MESSAGES 8 icon to access the Message screen. Siri will automatically asks ‘Who do you want to send it to’ when the MESSAGE icon is selected.3rd PARTY APPSSupported CarPlay apps that are downloaded on your phone will appear on the CarPlay screen. Touch the apps icons to access those supported apps.NOTE: A list of the supported CarPlay supported apps can be foundat /ios/carplay/Ensure phone has latest version of the 3rd Party Apps.Apple CarPlay uses Siri to perform many actions like sendingmessages, placing calls, and looking up/setting POI/Destinations. A Siri session can be initiated on any screen by:1. Touch and holding the HOME icon 1 on the CarPlay screen or2. Press the steering wheel VOICE RECOGNITION 13 button.Note: Ensure Siri feature is set to ON in your phone (Go to Settings > Siri). 3. Say any of the following commands;•“Text <John Smith> ‘Call you later’” to send a text message. •“Read text messages” to read available text message. •“Call <John Smith>” to make a phone call.•“Find <POI/Destination>” to locate a POI/Destination.CarPlay Home ScreenSIRI1 HOME ICON2 W3 C4 PHONE TIME 5P HONE6A PPLE MUSIC™PARTY APPS CREEN PAGE INDICATOR CURRENT CARPLAY AUDIO PLAYING VOICE RECOGNITION BUTTON234156781112ELECTRONIC STABILITY CONTROL (ESC)Section 5 of the Owner's Manual.steering feel along with the responsiveness of the engine andtransmission. In Sport mode, the fuel efficiency may decrease. 231becomes dirty, wipe the lens with a clean and soft cloth.Advanced Smart Cruise Control will stop your vehicle if the vehicle ahead of you stops. If the vehicle ahead of you starts moving, your vehicle will start as well. However, if the vehicle stops for more than 3 seconds, you must depress the accelerator pedal or push up/down the toggie switch (RES+/SET-) to start driving.For more detailed information please refer to Section 5 of the Owner's Manual.21Manual shift modeNOTE: D traditional automatic transmission:AUTOMATIC TRANSMISSION &B L U E T O O T H ® H A N D S -F R E ESWITCHING BETWEEN PAIRED PHONESOn the radio:1. Push the SETUP button.2. Select Bluetooth .3. Select Bluetooth Connection .4. Select Connect next to the desired phone.CONNECTING YOUR PHONEOn the radio:1. Push the SETUP button.2. Select Bluetooth .3. Select Bluetooth Connection .4. Select Add New . In your phone’sBluetooth settings:5. Select the <Vehicle Name> on your phone.6. Enter the passkey from theradio or accept the authorization pop-up on your phone.For more information, visit Using Voice Command:“Change Bluetooth device”。

Table.Spearman Correlations between CRISS and individual components at12months and Comparison of ABA and PBO using CRISS index and individual components at12 months;Outcome ABAN=44PBON=44TreatmentDifference(ABA-PBO)P-value^ACR CRISS(0.0-1.0) median(IQR)0.68(1.00)0.01(0.86)0.03 SpearmanCorrelationLSmean(SE)LSmean(SE)LS mean(SE)P-value^^D mRSS(0-51)-0.75*-6.7(1.30)-3.8(1.23)-2.9(1.75)0.10D FVC%predicted0.36*-1.4(1.30)-3.1(1.20)1.7(1.72)0.32D PTGA(0-10)-0.17-0.50(0.392)-0.30(0.385)-0.20(0.557)0.73D MDGA(0-10)-0.47*-1.34(0.282)-0.18(0.284)-1.16(0.403)0.004D HAQ-DI(0-3)-0.21-0.11(0.079)0.11(0.076)-0.22(0.108)0.05^p-value for treatment comparisons based on Van Elteren test^^p-value for treatment comparisons based on ANCOVA model with treatment,duration of SSc and baseline value as covariates*p<0.01using Spearman correlation coefficientNegative score denotes improvement,except for FVC%where negative score denotes worsening;LS mean=least squares mean;SE=standard errorFRI0328BRANCHED CHAIN AMINO ACIDSIN THE TREATMENTOF POLYMYOSITIS AND DERMATOMYOSITIS:RESULTSFROM THE BTOUGH STUDYNaoki Kimura,Hitoshi Kohsaka.Tokyo Medical and Dental University(TMDU), Department of Rheumatology,Tokyo,JapanBackground:Muscle functions of patients with polymyositis and dermato-myositis(PM/DM)remain often impaired even after successful control of the immune-mediated muscle injury by immunosuppressive therapy.The only effort at the present to regain muscle functions except for the immu-nosuppression is rehabilitation,which is carried out systematically in lim-ited institutes.No medicines for rebuilding muscles have been approved. Branched chain amino acids(BCAA)promote skeletal muscle protein syn-thesis and inhibit muscle atrophy.They thus have positive effects on muscle power,but have never been examined for the effects on PM/DM patients.Objectives:To assess the efficacy and safety of BCAA in the treatment of PM/DM for official approval of their use in Japan.Methods:Untreated adults with PM/DM were enrolled in a randomized, double-blind trial to receive either TK-98(drug name of BCAA)or pla-cebo in addition to the conventional immunosuppressive agents.One package of TK-98(4.15g)contained L-isoleucine952mg,L-leucine 1904mg,and L-valine1144mg(molar ratio is1:2:1.35),and6packages were administered daily in3divided doses.After12weeks,patients with average manual muscle test(MMT)score less than9.5were enrolled in an open label extension study for12weeks.The primary end point was the change of the MMT score at12weeks.The secondary end points were the disease activity evaluated with myositis disease activity core set (MDACS)and the change of functional index(FI),which evaluates dynamic repetitive muscle functions.Results:Forty-seven patients were randomized to the TK-98(24patients [12with PM and12with DM])and placebo(23patients[11with PM and12with DM])groups.The baseline MMT scores were equivalent (7.97±0.92[mean±SD]in the TK-98group and7.84±0.86in the placebo group).The change of MMT scores at12weeks were0.70±0.19(mean ±SEM)and0.69±0.18,respectively(P=0.98).Thirteen patients from the TK-98group and12from the placebo group were enrolled in the exten-sion study.The MMT scores in both groups improved comparably throughout the extension study.The increase of the FI scores of the shoulder flexion at12weeks was significantly larger in the TK-98group (27.9±5.67and12.8±5.67in the right shoulder flexion[P<0.05],27.0±5.44and13.4±5.95in the left shoulder flexion[P<0.05]).The improvement rate of the average FI scores of all tested motions(head lift,shoulder flexion,and hip flexion)through the first12weeks was larger in the TK-98group.No difference was found in the disease activ-ity throughout the study period.Frequencies of the adverse events until 12weeks were comparable.Conclusion:Although BCAA exerted no effects in the improvement of the muscle strength evaluated with MMT,they were effective in the improve-ment of dynamic repetitive muscle functions in patients with PM/DM with-out significant increase of adverse events.Disclosure of Interests:None declaredDOI:10.1136/annrheumdis-2019-eular.5235FRI0329ANALYSIS OF11CASES OF ANTI-PL-7ANTIBODYPOSITIVE PATIENTS WITH IDIOPATHIC INFLAMMATORYMYOPATHIES.MALIGNANCY MAY NOT BE UNCOMMONCOMPLICATION IN ANTI-PL-7ANTIBODY POSITIVEMYOSITIS PATIENTSTaiga Kuga,Yoshiyuki Abe,Masakazu Matsushita,Kurisu Tada,Ken Yamaji, Naoto Tamura.Juntendo University School of Medicine,Department of Internal Medicine and Rheumatology,Tokyo,JapanBackground:Various autoantibodies are known to be related to idiopathic inflammatory myopathies(IIM).Anti-PL-7antibody is anti-threonyl-tRNA synthetase antibody associated with antisynthetase syndrome(ASS).Since anti-PL-7antibody is rare(mostly1-4%of myositis,while a Japanese study reported17%),little is known as to clinical characteristics of it(1). Objectives:To analyze clinical characteristics of anti-PL-7positive IIM patients.Methods:Anti-PL-7antibody was detected by EUROLINE Myositis Profile 3.IIM diagnosis was made by the2017EULAR/ACR classification criteria (2)and/or Bohan And Peter classification(3).Eleven anti-PL-7antibody positive adult patients(all female),age at onset(61.5±12.6years)were enrolled in this study between2009and2018.Clinical manifestations, laboratory and instrumental data were reviewed in this single centre retro-spective cohort.Results:Characteristic symptoms were identified at diagnosis:skin mani-festations(7/11cases,63.6%),muscle weakness(8/11cases,72.7%), arthralgia(5/11cases,45.5%)and Raynaud’s phenomenon(4/11cases, 36.4%).Myogenic enzymes were elevated in most cases(10/11cases, 90.9%).ILD was detected in all patients(11/11cases,100%)and2 patients(18.2%)developed rapidly progressive rgest IIM subtype was polymyositis(PM,5/11cases),followed by dermatomyositis(DM,3/ 11cases)and amyopathic dermatomyositis(ADM,3/11cases).Five patients(45.5%)complicated with malignancy within3years from the diagnosis of IIM.Though clinical manifestations and laboratory data showed any difference between malignancy group and non-malignancy group,all3ADM cases but no DM cases complicated with malignancy in this study.Conclusion:Anti-PL-7antibody positive IIM patients frequently complicated with ILD.Frequency of cancer in ASS patients within three years from diagnosis was 1.7%and not much different from the general population in previous report from France(4).Though this study only included IIM patients and may have selection bias,careful malignancy survey may be essential in Anti-PL-7antibody positive IIM patients.REFERENCES:[1]Y Yamazaki,et al.Unusually High Frequency of Autoantibodies to PL-7Associated With Milder Muscle Disease in Japanese Patients With Poly-myositis/DermatomyositisARTHRITIS&RHEUMATISM Vol.54,No.6, June2006,pp2004–2009[2]Lundberg IE,Tjärnlund A,Bottai M,et al.EULAR/ACR classification crite-ria for adult and juvenile idiopathic inflammatory myopathies and their Major Subgroups.Ann Rheum Dis.2017;76:1955–64.[3]Bohan A,Peter J.Polymyositis and dermatomyositis.N Engl J Med1975,292:344-347;403-407.[4]Hervier B,et al.Hierarchical cluster and survival analyses of antisynthe-tase syndrome:phenotype and outcome are correlated with anti-tRNA syn-thetase antibody specificity.Autoimmunity reviews.2012;12:210–217. Disclosure of Interests:Taiga Kuga:None declared,Yoshiyuki Abe:None declared,Masakazu Matsushita:None declared,Kurisu Tada Grant/ research support from:Eli Lilly,Ken Yamaji:None declared,Naoto Tamura Grant/research support from:Astellas Pharma Inc.,Asahi Kasei Pharma,AYUMI Pharmaceutical Co.,Chugai Pharmaceutical Co.LTD, Eisai Inc.,:Takeda Pharmaceutical Company Ltd.,Speakers bureau:Jans-sen Pharmaceutical K.K.,Bristol-Myers Squibb K.K.,:Mitsubishi Tanabe Pharma Co.DOI:10.1136/annrheumdis-2019-eular.4150846Friday,14June2019Scientific Abstractson December 25, 2023 by guest. Protected by copyright./Ann Rheum Dis: first published as 10.1136/annrheumdis-2019-eular.5235 on 27 May 2019. Downloaded from。

Safety Data SheetCreation date 04-Jul-2014 Revision date 28-Mar-2022 Version 71. Identification of the Substance/Preparation and of the Company/Undertaking Product name DOUBLE-COATED ADHESIVE TAPEProduct identifier NO500Product Code P020-********-0000Supplier Address Nitto Denko Corporation Toyohashi Plant18, Hirayama, Nakahara-cho, Toyohashi, Aichi, 441-3194, JapanTEL.+81-532-41-8461, FAX. +81-532-43-1879Department responsible Quality Management Dept. Administration DivEmergency telephone number +81-532-41-1121(TOYOHASHI PLANT)Recommended Use For fixing general nameplatesFor bonding metalFor bonding plasticFor fixing foam parts2. Hazards IdentificationGHS ClassificationNot a dangerous substance or mixture according to the Globally Harmonized System (GHS) Classification of the substance ormixture3. Composition/information on IngredientsSingle Substance or Mixture ArticleChemical name CAS No Weight-%Acrylic adhesive - 85-95Nonwoven fabric - 5-15 Silicone coated paper (Release liner) - -* The exact percentage (concentration) of composition has been withheld as a trade secret4. First aid measuresIf inhaled Will not occurSkin contact Wash with plenty of water and soapIn the case of skin irritation or allergic reactions see a physicianEye contact Immediately flush with large amounts of water for at least 15 minutes. Examination and treatment bya physician if necessaryIngestion Immediately induce vomiting and then consult a doctorNo information availableMost important symptoms/effects,acute and delayedSelf-protection of the first aider No information availableNote to physicians No information available5. Fire-fighting measuresFire extinguishing agent WaterABC-powderExtinguishing powderCarbon dioxide (CO2)Prohibited media No information availableSpecial exposure hazards in a fire No information availableSpecific extinguishing methods No information availableAdvice for fire-fighters Due to poisonous gas may be occurred, if needed, use Gas mask and Goggles6. Accidental release measuresPersonal Precautions Will not occur. Not specifiedWill not occur. Not specifiedProtective equipment and emergencyproceduresEnvironmental precautions Will not occur. Not specifiedMethods and material for containmentand cleaning upWill not occur. Not specified7. Handling and StorageHandlingTechnical measures: None in particularLocal and general exhaust ventilation Not required for use in normal temperatureProvide adequate ventilation when performing high-temperature processingPrecautions for safe handling None in particularRemarks Use caution and protective gloves to avoid cuts with edges of tape liners StorageTechnical measures: None in particularStorage conditions Store at room at room temperature and normal humidity away from direct sunlight Storage conditions to avoid Avoid high temperatureIncompatible materials No data availableConditions for safe storage,including any incompatibilitiesShipping package8. Exposure Controls/Personal ProtectionControl parameters UnsetPermissible concentration UnsetAppropriate engineering controls Not requiredPersonal protective equipment [PPE]Respiratory Protection Not requiredHand protection Not requiredEye protection Not requiredSkin protection Not requiredGeneral hygiene considerations None under normal use conditions9. Physical and Chemical PropertiesPhysical state Roll typeSolidColor translucentOdor None in particularpH No data availableMelting point / Freezing point No data availableboiling point No data availableBoiling point / boiling range No data availableFlash Point No data availableAutoignition temperature No data availableUpper No data availableLower No data availableVapor pressure No data availableSpecific gravity approx 1.3Solubility Insoluble in waterPartition Coefficient (n-octanol/water) No data availableDecomposition temperature No data availableOther Data Flammability10. Stability and ReactivityReactivity Stable under normal conditions of use and storagePossibility of hazardous reactions No data availableConditions to avoid No information availableIncompatible materials No data availableHazardous decomposition products No information available11. Toxicological InformationAcute Toxicity No information availableSkin corrosion/irritation No information availableSerious eye damage/eye irritation No information availableRespiratory sensitization No information availableGerm cell mutagenicity No information availableReproductive Toxicity No information availableSpecification target internalorgans/systemic toxicity (singleexposure)No information availableSpecification target internalorgans/systemic toxicity (repeatexposure)No information availableAspiration hazard No information available12. Ecological InformationPersistence and degradability No information availableBioaccumulation No information availableMobility in soil No information availableOzone depletion potential (ODP) No information available13. Disposal ConsiderationsWaste treatment methods Disposal should be in accordance with applicable regional, national and local laws and regulationsWhen burning it, use an incinerator which satisfies its technical guidelines (the residence time is 2seconds or more at a temperature of 800 °C centigrade or more).Contact an authorized industrial waste treatment company for off-site disposalContaminated packaging Contact a recycling manufacture14. Transport InformationInternational regulationsTransport hazard class Not ApplicableUN number Not ApplicableJapanese regulation Not ApplicableSpecial precautions in connectionwith transport or conveyanceDo not store in long term under high temperature or leave outdoors15. Regulatory informationLocal regulation Japanese regulation Fire Service Act : Designated flammable material (Synthetic resins : Other) Foreign regulation Contact NITTO for more informationREACH 7 Article 33 Article SVHCnotification (> 0.1 wt. %)Not Applicable16. Other informationCreation date 04-Jul-2014Revision date 28-Mar-2022Version 7Key literature references and sources for data JIS Z 7252：2019 Classification of chemicals based on "Globally Harmonized System of Classification and Labelling of Chemicals (GHS)"JIS Z7253：2019 Safety data sheet for chemical products -Content and order of sectionsDisclaimerContents are based on documents, information and data which are available at this time, but nothing is guaranteed as regards content, physical and chemical properties, hazardsAlso precautions are subject to ordinary handling, so please take safety measures as usage in special casesThe regulatory information presented here should not necessarily be considered as all-inclusive.Other local and international regulations may also applyEnd of Safety Data Sheet。

Note:Tape armour must bere-trimmed at 90° to thevertical axis of the cableafter it has been spread,to ensure that the fullface is correctlypresented.IArmour / braidIIIShroud option621354564214321 3213Braid 'X',Flat Steel Wire 'Y',Steel Tape 'Z'Ring PositionSWAPositionGeneral identification ring orientation for:Reversible Armour Clamping Ring (RAC)Gland Type: ICG 653/UNIVExdb IIC Gb / Exeb IIC Gb / Extb IIIC DbBaseefa06ATEX0058X II 2 GD IP66IECEx BAS06.0015XIEx 14.0272XEAC ТC RU C-GB.ГБ05.B.00750c CSA us No: 1024328Class 1 Zone 1 AExd IIC, AExe II,Zone 21 AExtDClass 1 Div 2 ABCD, Class II Div 2 Groups EFG, Class IIICNEx12.3448XCertification DetailsOperating temperature range -60°C +80°CNote: Armour cable acceptance sizes are marked onthe clamping ring.IMPORTANT: The arrowhead indicating thecorrect armour thickness or type should pointtowards the equipment1. Backnut2. Middle Nut3. Reversible Armour Clamping Ring (RAC)4. Armour Spigot5. Rubber Pot6. Entry (with captive deluge seal)Cable Preparation Gland PreparationAStrip Cable to suit equipment as shown above andexpose the armour/braid 'I' removing all cable fillers.'I' = 20mm for cable gland sizes Os to A'I' = 25mm for cable gland sizes B to C2'I' = 32mm for cable gland sizes D to F'II' to suit equipment.If required, fit shroud.See Notes re. Drain Wires.BPush the cable through the armour spigot ④. Spreadarmour/braid over the armour spigot ④ until the endof the armour/braid is up against the shoulder of thearmour cone. Position the armour clamping ring ③.CRemove the rubber pot ⑤ from the entry ⑥. Placethe entry ⑥ over the armour spigot ④. Move thesub-assembly ① and ② up to meet the entry ⑥.AI 301 - Issue W / Page 1 of 4AI 301 / Issue W - 06/17 Assembly Instructions for cable gland:ICG 653/UNIVProduct supplied may differslightly from that shown.Images are for illustrationpuproses only.CompoundTape35mmRemove surplus compoundRemove surplus compoundCompound5465621242663142AI 301 - Issue W / Page 2 of 4When handling this material, the gloves supplied must be worn. The epoxy compound is supplied in the form of a two part package. These should be mixed into the ratio of 1:1 until both colours have blended into one, without any streaks. Rolling and folding is the most satisfactory method of obtaining an even blend. Once mixed, the compound must be used within 30 minutes. After this time it will begin to stiffen. The compound should be kept at an ambient temperature of no less than 20°C prior to using. At lower temperatures it becomes difficult to mix. Should any compound come into contact with the skin it should be cleaned off with skin cleaner and not allowed to dry on the skin. Only compound for immediate terminations should be mixed.The mixing and installation of the compound at an ambient temperature below 4°C is not recommended due to extended curing periods.The storage of the compound shall be at temperatures between 5°C and 30°C.DHold the entry ⑥ in position with a spanner/wrench to prevent rotation. Hand tighten the middle nut ② onto the entry ⑥ and turn a further half to three quarters of a turn with a spanner/wrench.EUnscrew the middle nut ② and visually inspect that the armour/braid has been successfully clamped between the armour spigot ④ and the armourclamping ring ③. If armour/braid not clamped repeat assembly.FRemove the entry ⑥, spread the cable cores out for the compound packing. Pack the compound between the cores shown. See notes below and Fig. 7 for compound preparation.GWith all gaps and voids filled, bring the conductorsback together and pack more compound around the outside of the conductors. Tape the conductors together to prevent disturbance of the compound seal. Pass the rubber pot ⑤ over the armour spigot ④ and remove any surplus compound. from the top of rubber pot ⑤ and the joint face as indicated.H Replace the entry ⑥ over the rubber pot ⑤ ensuring that compound does not cover the end of ⑤.ILocate and hand tighten the sub-assembly ① and ② to the entry ⑥.IMPORTANT: The conductors must not be moved for a minimum of four hours.EPOXY COMPOUND PREPARATION1.0 INSULATING DRAIN WIRES WITH HEAT SHRINK OR COLD SHRINK TUBING 1.1 Fold back the armour / braid and bend it to right angles from the inner sheath. 1.2 Remove foils and tape level with the outer sheath, exposing the drain wires and insulated conductors. Cut back a further 10mm of inner sheath.1.3 Pass 100mm length of heat shrink or cold shrink tubing over the drain wire until it comes into contact with the foils, then shrink the tubing evenly down onto the drain wireso that no air pockets occur.1.4 To insulate the joint between the foils and the tubing a suitable piece of 10mm long shrink tubing or neoprene stretch tubing or a 10mm wide lap of PVC tape may be used. 1.5 After completing 1.1 to 1.4 on each drain wire, lay the armour / braid parallel to the cable, if applicable, then carry out instruction B.DRAIN WIRE PREPARATIONThe following instructions are the various BASEEFA approved methods of passing drain wires etc. through the compound barrier and should be followed if permitted by cable installation specifications.2.0 INSULATING DRAIN WIRES / SCREENS WITH SEPARATE INSULATED CRIMPED CONDUCTORS OR SOLDERED CONNECTION 2.1 Fold back the armour / braid and bend to right angles from the inner sheath. 2.2 Remove a further 15mm of inner sheath (See Fig. 1). 2.3 Unravel one or two groups of wires from the screen wires, then remove the remainder of the screen wires (See Fig. 2). 2.4 Twist the group of screen wires into a pigtail and cut to 15mm long. 2.5 Crimp an insulated conductor to the pigtail wih a suitable insulated butt ferrule (or soldered connection), leaving enough length of the insulated conductor to enable theremote end to be connected to the earth terminal in the equipment. (See Fig. 3). Note: There shall be a minimum of 10mm of compound on both ends of the crimped /soldered joint.2.6 To insulate the joint between the screen wires and the insulated conductor, place one lap of PVC insulating tape over the exposed metallic joint. 2.7 After completing 2.1 to 2.6 on each drain wire, lay the armour / braid parallel to the cable. Then carry out instruction B.3.0 INSULATING DRAIN WIRES WITH INSULATING VARNISH OR PAINT 3.1 Fold back the armour / braid and bend it at right angles from the inner sheath. 3.2 Remove the foil and tape level with the inner sheath exposing the drain wires and conductor pairs. 3.3 Cut back a further 10mm of inner sheath (See Fig. 4). 3.4 Spray or paint the drain wires with insulating varnish or paint, then leave to dry (See Fig. 5) 3.5 To insulate the foil ends a suitable piece of 10mm long shrink tubing or neoprene stretch tubing or a 10mm wide lap of PVC tape may be used (See Fig. 6).3.6 After completing 3.1 to 3.5 on each drain wire, lay the armour / braid parallel to the cable. Then carry out instruction B.Outer SheathArmour / braidArmour / braid15mm10mmInner Sheath One or two groupsof screen wiresInsulated ConductorCrimp or SolderScreen WiresInner Sheath FoilsDrain WireInsulatedDrain WireSleevingFig. 1Fig. 2Fig. 3Fig. 6Fig. 5Fig. 41652612AI 301 - Issue W / Page 3 of 4JAllow the compound to cure. (See Fig. 7 for Curing Times). Untighten the sub-assembly ① and ② from the entry ⑥ to enable inspection.The rubber pot ⑤ may be removed for inspection to ensure that the packing is satisfactory.Add further compound if necessaryKRe-assemble the rubber pot ⑤ and the entry ⑥. Tighten the sub-assembly ① and ② to the entry ⑥ until resistance is felt and add half to three quarters of a turn to ② with a spanner / wrench. Tighten the backnut ① to form a seal around the cable, then tighten a further full turn using a wrench / spanner. Ensure that the middle nut ② does not rotate when tightening the backnut. Ensure that the deluge seal is pulled down into position. Locate the shroud over the cable gland, if applicable.1289080706050403020100S h o r e H a r d n e s sTime (Hours)40 ºC 25 ºC 4 ºC416Epoxy CompoundCure Time Vs. TemperatureFig. 7CABLE GLAND SELECTION TABLEEntry ThreadSize MetricSize RefNPTAcross Flats C o m p r e s s e d L e n g t hAcross CornersHexagon Dimensions O A B C C2D E FM20M20M25M32M40M50M63M75½" - ¾"2" - 2½"2½" - 3"11.016.221.926.337.147.859.012.518.424.729.741.753.566.2/65.326.532.539.550.560.670.888.0104.0Inner Sheath/CoresOuter Sheath Cable Acceptance Details8.910.0Min.Max.9.512.516.922.028.036.046.057.016.020.526.033.041.052.665.378.00.8/1.250.8/1.251.25/1.61.6/2.01.6/2.01.8/2.51.8/2.51.8/2.50/0.8Os M20½"½"26.567.067.073.678.082.488.792.799.467.0M a x i m u m L e n g t h83.084.091.098.0100.0116.0124.0122.083.08.910.0 5.512.00.8/1.250/0.80/0.8 0/0.70/0.70/0.70/1.00/1.00/1.0¾" - 1"1" - 1¼"1¼" - 1½"1½" - 2"12153042608010012012ATEX Max. No. of Cores Max.Over Cores Max. Inner Sheath Steel Wire Armour/Tape/BraidOrientation2Orientation 124.030.036.046.055.065.080.095.024.0ACCESSORIES:Before cable gland assembly or stripping of the cable gland assembly, consideration should be given to any cable gland accessories that may be required, such as: -● Shroud, to offer additional corrosion protection.● Locknut, to secure cable glands into position.● Sealing washer, to offer additional ingress protection of the enclosure at thecable gland entry.● Earthtag, to provide an external armour / braid bonding point.● Serrated washer, to dampen any vibrations that may loosen the locknut orcable gland assembly.SCHEDULE OF LIMITATIONS - Baseefa ATEX / IECEx:1. These glands are suitable for use within an operating temperature range of-60°C to +80°C.2. When the gland is used for increased safety, the entry thread shall besuitably sealed to maintain the ingress protection rating of the associated enclosure.AI 301 - Issue W / Page 4 of 4EU Declaration of Conformity in accordance with European Directive 2014/34/EU Manufacturer: Hawke InternationalAddress: Oxford Street West, Ashton-under-Lyne, OL7 0NA, United Kingdom.Equipment: Group II Barrier Cable Glands Type: ICG 653/UNIVProvisions of the Directive fulfilled by the Equipment:Group II Category 2GD Exeb IIC Gb, Exdb IIC Gb, Extb IIIC Db – IP66Notified Body for EU-Type Examination: SGS-Baseefa 1180 Buxton UK EU-type Examination Certificate: Baseefa06ATEX0058X Notified Body for production: SGS-Baseefa 1180 Buxton UK Harmonised Standards used:EN 60079-0:2012+A11:2013, EN60079-1:2014, EN60079-7:2015, EN60079-31:2014.On behalf of the above named company, I declare that, on the date the equipmentaccompanied by this declaration is placed on the market, the equipment conforms with all technical and regulatory requirements of the above listed directives.………………………………….A. Tindall Technical Manager………………………………………Ti d ll● The compound may be adversely affected by some solvent vapours. If such vapours are likely to be present in the vicinity of the cable gland in service, suitable precautions may be necessary. (Contact Hawke's Technical Dept).● The compound cures at a Shore D hardness of 85, when it can be handled. The compound when fully cured is suitable for use at a temperature range of -60°C to +80°C.NOTES - c CSA us:1. Class 1 Division 2 suitable for Marine Shipboardapplications only according to CSA Standard 245 andIEEE45 / IEC 600092-353 Standards, or certified equivalent, for use on Shipboards and Offshore Rigs / Platforms only.2. Glands must comply with the Canadian Electrical Codeand National Electric Code requirements for threaded entries.3. For Exe applications, a sealing washer or thread sealantmay be required between the enclosure and the gland to maintain the IP rating of the enclosure.4. Drain wires and earth screening may pass through thecompound barrier using one of the methods which are details in this assembly instruction; heat shrink or cold shrink tubing, or addition of an insulated crimped or soldered conductor or insulation by varnish or paint.5. This cable gland may only be installed when temperatureis above +4°C. After completion of the installation, the assembly is then suitable for -60°C to +80°C.。

TDUXI N S T A L L A T I O N I N S T R U C T I O N Inflatable Duct Sealing SystemFigure 26.0 Installation Procedures6.1 One Cable in Duct1.Clean 4” of duct and the cable sheath with a wet cloth. (Figure 3)2.For ease of installation, lubricate at least 6” of cable sheath with supplied lubricant or company approved lubricant. (Figure 4)3.Remove the protective paper from the sealing strip on the outside surface of the TDUX duct seal and lubricate the strip abundantly. If the ducts are made of concrete or polyethylene,lubricate the outside surface of the TDUX seal as well. (Figure 5)4.Remove the protective paper from the sealing strip on the inside surface of the TDUX duct seal and lubricate the strip abundantly.(Figure 6)5.Lubricate the filling tube on the TDUX duct seal. (Figure 7)6.Wrap the TDUX duct seal around the cable and slide completely into the duct. Be sure that filling tube faces out of the duct and center cable in duct prior to inflation, if possible.(Figure 8)Figure 3Figure 5Figure 6Figure 7Figure 8Figure 9Figure10Figure 11Figure 13 illustrates several different multiple cable configurationsand branch clip locations .1.Clean cables and lubricate duct as in 6.1, Steps 1 and2.2.Open clip wings on one side. Lubricate the wings abundantly to ensure that they do not stick together.(Figure 14)3.Remove one protection paper and lubricate the larger surface of the clip wing.(Figure 15)4.Repeat steps 2 and 3 for the other clip wings. Removeprotection paper only after lubricating at least one wing side.(Figure 16)5.Lubricate the cables generously where the cables come together. (Figure 17)6.Insert the clip between the cables, making sure that there is only one cable between each clip wing (see figure 13). Make sure that the central part of the clip is positioned where the cables come together (mark flush with duct entrance).(Figure18)Figure 13Figure 14Figure 15Figure 16Figure 177.If necessary, use a tie wrap to hold the clip in place. Cut off excesstie wrap and position the head between the cables. Tape all cables together near the duct. (Figure 19)plete steps 3-10 in section 6.1.6.3 Square DuctSealing cables in a square duct requires the use of a TDUXsquare duct kit in addition to the standard TDUX ductsealing system. Mastic components and instructions fortheir use are included in that kit. For sealing more than onecable in a square duct, a TDUX CL sealing clip kit will alsobe required (see section 6.2).6.4 Empty DuctClean and lubricate the duct, then lubricate and install the appropriate size TDUX duct seal inside the empty duct.Inflate the TDUX duct seal as in step 7-10 of section 6.1.7.0 Removal1.Deflate the TDUX duct seal by piercing with a screwdriver.Note: Be careful not to damage the cable. (Figure 20)2.Pry the TDUX duct seal away from the duct and from the cablesheath with a blunt tool. Spray lubricant into the released areas so that the TDUX duct seal does not stick to the duct during removal. (Figure 21)3.Pull the TDUX duct seal out of the duct with a pair of pliers.(Figure 22)4.If necessary, remove tape (and tie wrap) from the cable bundle.Spread cables and apply lubricant where the cables come togeth-er. Remove as much clip core and sealant as possible with a pair of pliers.(Figure 23)Figure 19 Figure 21 Figure 22Figure 23Technical Assistance Center (TAC)Tel.: 800.830.5056Email:************************** The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, CommScope makes no warranties as to its accuracy or completeness and disclaims any lia bility in connection with its use. Commscope obligations shall only be as set forth in CommScope Standard Terms and Conditionsof Sale for this product and in no case will CommScope be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of CommScope products should make their own evaluation to determine the suitability of each such product for the specific application.© 2016 Commscope inc. All Rights ReservedThis product is covered by one or more U.S.patents or their foreign equivalents. For patents, see /ProductPatent/ProductPatent.aspx。

70-0705-7616-3 (2/02)Limitation of Remedies and Liability: If the 3M VHB Tape is proved to be defective within the warranty period stated above, THE EXCLUSIVE REMEDY , AT 3M’S OPTION, SHALL BE TO REFUND THE PURCHASE PRICE OF OR TO REPAIR OR REPLACE THE DEFECTIVE 3M VHB TAPE. 3M shall not otherwise be liable for loss or damages, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including negligence, warranty, or strict liability.Warranty: 3M warrants for 24 months from the date of manufacture, that 3M VHB Tape will be free of defects in material and manufacture. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIEDWARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.This warranty does not cover damage resulting from the use or inability to use 3M VHB Tape do to misuse. workmanship in application, or application or storage not in accordance with 3M recommended procedures. Important Notice: User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user’s method of application. Please remember that many factors can affect the use and performance of a 3M product in a particular application. The materials to be bonded with the product, the surface preparation of these materials, the product selected for use, the conditions in which the product is used,and the time and environmental conditions in which the product is expected to perform are among the many factors that can affect the use and performance of a 3M product. Given the variety of factors that can affect the use and performance of a 3M product, some of which are uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user’s method of application.。