M3U9P1(TB)

DELLTM390TABLE OF CONTENTSOVERVIEWMini Tower Computer (MT) View 3-4 Desktop Computer (DT) View 5-6 Small Form Factor Computer (SFF) View 7-8Operating System, Chipset 9 Processor 10 Memory 11 Hard Drives, Removable Storage, System Expansion Slots 12 Graphics/Video Controller, External Ports/Connectors 13 Communications—Network Adapter (NIC), Wireless 14 Audio and Speakers, Keyboard and Mouse 14 Security, Software, Environmental, All-in-One Stands & Mounts, Service and Support 15System Dimensions (Physical) 16 System Expansion Slots 16 System Level Environmental and Operating Conditions 17 Power 18-19 Audio 20 Communications 20-25 Graphics/Video Controller 26-27 Hard Drives 28-31 Optical Drive 32-33 Media Card Reader 34 BIOS Defaults 35 Chassis Enclosure and Ventilation Requirements 36 Environmental Attributes 37 Acoustic Noise Emission Information 38-40MINI TOWER COMPUTER (MT) VIEW23 456 789110 11 12131415 161 2 3 456789MT System Board ComponentsDESKTOP COMPUTER (DT) VIEW1 2 3 4 5 6 7 8 9 10 1112 13 14 151 2 3 45678 9DT System Board ComponentsSMALL FORM FACTOR COMPUTER (SFF) VIEW12 34 5 67 8 9 10 11 14 1512 135 6 7 31824SFF System Board ComponentsMARKETING SYSTEM CONFIGURATIONSNO TE: O f fe rin gs ma y v a ry by c ou ntry.Fo r mo r e i nf o rma ti o n re ga rdi ng t he c onfi gu ra ti o n o f y ou r c om pu ter,c lic k Sta r t>H elp a nd Su ppo r t a nd s elec t th e o p ti on to v i ew i n fo rma ti on a bou t you r c o mpu t er.OPERATING SYSTEMCHIPSETPROCESSORNOTE: Global Standard Products (GSP) are a subset of Dell’s relationship products that are managed for availability and sync hro-nized transitions on a worldwide basis. They ensure the same platform is available for purchase globally. This allows customers to reduce the number of configurations managed on a worldwide basis, thereby reducing their costs. They also enable companies to implement global IT standards by locking in specific product configurations worldwide. The following GSP processors identi-fied below will be made available to Dell customers.NOTE: Processor numbers are not a measure of performance. Processor availability subject to change and may vary by region/ country.MEMORYNOTE: Memory modules should be installed in pairs of matched memory size, speed, and technology. If the memory modules are not installed in matched pairs, the computer will continue to operate, but with a slight reduction in performance. The entire 8GB memory range is available to 64-bit operating systems.1 The total amount of available memory will be less than 4GB. The amount less depends on the actual system configuration. To fully utilize 4GB or more of memory requires a 64-bit enabled processor and 64-bit operating system.HARD DRIVESREMOVABLE STORAGENOTE: Dell 19 in 1 Media Card Reader (MCR) is supported via a F5 to F3 bay converter on the MT and DT and may require a slim1 For hard drives, GB means 1 billion bytes; actual capacity varies with preloaded material and operating environment and will be less.2 Discs burned with this drive may not be compatible with some existing drives and players; using DVD+R media provides maximum compatibility.3 DVD-ROM drives may have write-capable hardware that has been disabled via firmware modifications.SYSTEM EXPANSION SLOTSNOTE: See Detailed Engineering Specifications for maximum card dimensions.NOTE: Add in card location and priority: PCIe x16: GFX, USB 3.0, Serial, Parallel/Serial, NIC, Wireless; PCIe x1: USB 3.0, Serial,GRAPHICS/VIDEO CONTR OLLERNOTE: MT supports full height (FH) cards and DT and SFF supports low profile (LP) cards.EXTERNAL PORTS/CONNE CTORSNOTE: MT supports full height (FH) cards and DT and SFF supports low profile (LP) cards. See chassis diagrams section for port/ connector locations1This term does not connote an actual operating speed of 1 Gb/sec. For high speed transmission, connection to a Gigabit Ethernet server and network infrastructure is required.COMMUNICATIONS – WIRELESSNOTE: MT supports full height (FH) cards and DT and SFF supports low profile (LP) cards.AUDIO AND SPEAKERSCOMMUNICATIONS - NETWORK ADAPTER (NIC)NOTE: MT supports full height (FH) cards and DT and SFF supports low profile (LP) cards.SECURITYSOFTWAREENVIRONMENTALNOT E:Fo r mo r e d eta i l s o n D el l En vi r o n men ta l fea t ur es, pl ea s e to go to En vi r o n men ta l A t tr i b utes s ec ti o n.See yo ur s pec i fi c r egi o n fo r a v a i l a bi l i ty.ALL-IN-ONE STANDS AN D MOUNTSSERVICE AND SUPPORTNOT E: Fo r mo r e de ta i l s o n D el l Ser vi c e Pl a n s pl ea s e to go to:w w w.del l.c o m/s er vi c e/s er vi c e_pl a n s1 For a copy of our guarantees or limited warranties, please write Dell USA L.P., Attn: Warranties, One Dell Way, Round Rock, TX 78682. For more information, visit /warranty.2 Service may be provided by third-party. Technician will be dispatched if necessary following phone-based troubleshooting. Subject to parts availability, geographical restrictions and terms of service contract. Service timing dependent upon time of day call placed to Dell. U.S. only.DETAILED ENGINEERING SPECIFICATIONSSYSTEM DIMENSIONS (P HYSICAL)NOTE: System Weight and Shipping Weight is based on a typical configuration and may vary based on PC configuration. A typical configuration includes: integrated graphics, one hard drive, one optical drive.SYSTEM EXPANSION SLOTSSYSTEM LEVEL ENVIRONMENTAL AND OPERATING CONDITIONSPOWERNOTE: These form factors utilize a more efficient Active Power Factor Correction (APFC) power supply. Dell recommends only Universal Power Supplies (UPS) based on Sine Wave output for APFC PSUs, not an approximation of a Sine Wave, Square Wave, or quasi-Square Wave. If you have questions, please contact the manufacture to confirm the output type.POWERNOTE: These form factors utilize a more efficient Active Power Factor Correction (APFC) power supply. Dell recommends only Universal Power Supplies (UPS) based on Sine Wave output for APFC PSUs, not an approximation of a Sine Wave, Square Wave, or quasi-Square Wave. If you have questions, please contact the manufacture to confirm the output type.AUDIOCOMMUNICATIONS - NETWORK ADAPTER (NIC)NOTE: MT supports full height (FH) cards and DT and SFF supports low profile (LP) cards.COMMUNICATIONS - NETWORK ADAPTER (NIC) (CONT.)1 This term does not connote an actual operating speed of 1 Gb/sec. For high speed transmission, connection to a Gigabit Ethernet server and network infrastructure is required.COMMUNICATIONS – INTEGRATED LANNOTE: MT supports full height (FH) cards and DT and SFF supports low profile (LP) cards.1 This term does not connote an actual operating speed of 1 Gb/sec. For high speed transmission, connection to a Gigabit Ethernet server and network infrastructure is required.COMMUNICATIONS – INTEGRATED LAN (CONT.)1This term does not connote an actual operating speed of 1 Gb/sec. For high speed transmission, connection to a Gigabit Ethernet server andCOMMUNICATIONS – WIRELESSCOMMUNICATIONS – USB 3.0 ADD-IN CARDNOT E: M T s u p po r ts ful l h e i gh t (FH) c a rds a n d D T a n d S FF s u ppo r ts l o w pr o fi l e (L P) c a r ds.COMMUNICATIONS – SERIAL / PARALLEL PORT PCIE ADD-IN CARD NOT E: M T s u p po r ts ful l h e i gh t (FH) c a r d.COMMUNICATIONS—PS2/SERIAL ADD IN DONGLENOT E: M T s u p po r ts ful l h e i gh t (FH) don gl e a n d D T a n d S FF s u ppo r ts l o w pr o fi l e (L P) do n gl e.GRAPHICS/VIDEO CONTR OLLERNOT E: M T s u p po r ts ful l h e i gh t (FH) c a r ds a n d D T a n d S FF s u ppo r ts l o w pr o fi l e (L P) c a r ds.1 Up to 1.7 GB of system memory may be allocated to support integrated graphics, depending on operating system, system memory size and other factors.2 DVI and VGA can be used concurrently for multi-monitor display in DOS. The DisplayPort controller does not support multi-monitor display inDOSHARD DRIVES11 For hard drives, GB means 1 billion bytes ; actual capacity varies with preloaded material and operating environment and will be less.1For hard drives, GB means 1 billion bytes ; actual capacity varies with preloaded material and operating environment and will be less.1 For hard drives, GB means 1 billion bytes ; actual capacity varies with preloaded material and operating environment and will be less.HARD DRIVES1(CONT.)1 For hard drives, GB means 1 billion bytes ; actual capacity varies with preloaded material and operating environment and will be less.OPTICAL DRIVES1 Discs burned with this drive may not be compatible with some existing drives and players; using DVD+R media provides maximum compatibility.OPTICAL DRIVES (CONT.)MEDIA CARD READER (MCR)NOTE: Dell 19 in 1 Media Card Reader (MCR) is supported via a F5 to F3 bay converter on the MT and DT and may require a slim line optical drive depending on selectable configuration. MCR is not available on the SFF and USFF chassis.BIOS DEFAULTSCHASSIS ENCLOSURE & VENTILATION REQUIREM ENTSENCLOSURE VENTILATIONIf your enclosure has doors, they need to be of a type that allows at least 30% airflow through theenclosure (front and back).ENCLOSURE MINIMUM CLEARANCELeave a 10.2 cm (4 in.) minimum clearance on all vented sides of the computer to permit the airflowrequired for proper ventilation.RECOMMENDED ENCLOSUREDo not install your computer in an enclosure that does not allow airflow. This restricts the airflowand impacts your computer’s performance, possibly causing it to overheat.OPEN DESK MINIMUM CLEARANCEIf your computer is installed in a corner, on a desk, or under a desk, leave at least 5.1 cm (2 in.) clearancefrom the back of the computer to the wall to permit the airflow required for proper ventilation.REGULATORY COMPLIANCE AND ENVIRONMENTALProduct related conformity assessment and regulatory authorizations including Product Safety, Electromagnetic Compatibility (EMC), Ergonomics, and Communication Devices relevant to this product may be viewed at /regulatory_compliance. The Regulatory Datasheet for this product is located at /regulatory_compliance. Details of Dell's environmental stewardship program to conserve product energy consumption, reduce or eliminate materials for disposal, prolong product life span and provide effective and convenient equipment recovery solutions may be viewed at/environment. Product related conformity assessment, regulatory authorizations, and information encompassing Environmental, Energy Consumption, Noise Emissions, Product Materials Information, Packaging, Batteries, and Recycling relevant to this product may be viewed by clicking the Design for Environment link on the webpage.OPTIPLEX 390 MTThe Declared Noise Emission in accordance with ISO 9296 for the Dell OptiPlex 390 MT is as follows:(all values L WAd expressed in bels; 1 bel=10 decibels, re 10-12 Watts)The Declared A-weighted Sound Pressure Level in decibels (re 2x10-5Pa), at Operator, Bystander, and Desk Side Positions are measured in accordance with ISO 7779 7.6.1, 7.6.2, and C.15.2 and declared in accordance with ISO 9296 for this product is as follows1:1 All tests are conducted according to ISO 7779 and declared according to ISO 9296 except 90% CPU. For this mode, the system CPU was stressed at 90% utilization with no other peripheral device actively seeking. This test mode is not specified in ISO 7779, but was measured using the same microphone distances and measurement techniques defined for the other reported operating modes.OPTIPLEX 390 DTThe Declared Noise Emission in accordance with ISO 9296 for the Dell OptiPlex 390 DT is as follows:(all values L WAd expressed in bels; 1 bel=10 decibels, re 10-12 Watts)The Declared A-weighted Sound Pressure Level in decibels (re 2x10-5Pa), at Operator, Bystander, and Desk Side Positions are measured in accordance with ISO 7779 7.6.1, 7.6.2, and C.15.2 and declared in accordance with ISO 9296 for this product is as follows1:1 All tests are conducted according to ISO 7779 and declared according to ISO 9296 except 90% CPU. For this mode, the system CPU was stressed at 90% utilization with no other peripheral device actively seeking. This test mode is not specified in ISO 7779, but was measured using the same microphone distances and measurement techniques defined for the other reported operating modes.ACOUSTIC NOISE EMISSION INFORMATIONOPTIPLEX 390 SFFThe Declared Noise Emission in accordance with ISO 9296 for the Dell OptiPlex 390 SFF is as follows:(all values L WAd expressed in bels; 1 bel=10 decibels, re 10-12 Watts)The Declared A-weighted Sound Pressure Level in decibels (re 2x10-5Pa), at Operator, Bystander, and Desk Side Positions are measured in accordance with ISO 7779 7.6.1, 7.6.2, and C.15.2 and declared in accordance with ISO 9296 for this product is as1 All tests are conducted according to ISO 7779 and declared according to ISO 9296 except 90% CPU. For this mode, the system CPU was stressed at 90% utilization with no other peripheral device actively seeking. This test mode is not specified in ISO 7779, but was measured using the same microphone distances and measurement techniques defined for the other reported operating modes.。

ARM处理器的三大特点是：耗电少功能强、16位/32位双指令集和合作伙伴众多。

1、体积小、低功耗、低成本、高性能；2、支持Thumb（16位）/ARM（32位）双指令集，能很好的兼容8位/16位器件；3、大量使用寄存器，指令执行速度更快；4、大多数数据操作都在寄存器中完成；5、寻址方式灵活简单，执行效率高；6、指令长度固定。

编辑本段ARM处理器的历史1978年12月5日，物理学家赫尔曼·豪泽（Hermann Hauser）和工程师Chris Curry，在英国剑桥创办了CPU公司（Cambridge Processing Unit），主要业务是为当地市场供应电子设备。

1979年，CPU公司改名为Acorn计算机公司。

起初，Acorn公司打算使用摩托罗拉公司的16位芯片，但是发现这种芯片太慢也太贵。

"一台售价500英镑的机器，不可能使用价格100英镑的CPU！"他们转而向Intel公司索要80286芯片的设计资料，但是遭到拒绝，于是被迫自行研发。

1985年，Roger Wilson和Steve Furber设计了他们自己的第一代32位、6M Hz的处理器，Roger Wilson和Steve Furber[1]用它做出了一台RISC指令集的计算机，简称ARM（Acorn RISC Machine）。

这就是ARM这个名字的由来。

RISC的全称是"精简指令集计算机"（reduced instruction set computer），它支持的指令比较简单，所以功耗小、价格便宜，特别合适移动设备。

早期使用ARM芯片的典型设备，就是苹果公司的牛顿PDA。

20世纪80年代后期，ARM很快开发成Acorn的台式机产品，形成英国的计算机教育基础。

1990年11月27日，Acorn公司正式改组为ARM计算机公司。

苹果公司出资150万英镑，芯片厂商VLSI出资25万英镑，Acorn本身则以150万英镑的知识产权和12名工程师入股。

How to detect Thunderbolt device on ThunderboltM3installing ThunderboltM3 card.installing ThunderboltM3 card.•Settings \ Advanced\Windows OS configuration\Windows10 WHQL Support: UEFI–Fourth level»Fifth levelStep1: Please setting “Windows10 WHQL Support” to UEFI in BIOS setup.•Settings \ Advanced \ Intel® Thunderbolt / Discrete Thunderbolt(TM) Support : EnabledStep2: Please setting “Discrete Thunderbolt(TM) Support ” to Enabled in BIOS setup.•Settings \ Advanced \ Intel® Thunderbolt \ Discrete Thunderbolt(TM) Configuration \ GPIO3 Force Pwr: EnabledStep3: Please setting “GPIO3 Force Pwr ” to Enabled in BIOS setup.Step4: Press F10 button for saving change and exit.•Or please press “Save Changes and Reboot” and then press “OK button”. Setting \ Save & ExitStep5: Into BIOS setup again.Step6: Please setting “Windows 10 Thunderbolt Support” to Enabled.•Settings \ Advanced \ Intel® Thunderbolt /Discrete Thunderbolt(TM) configuration \Windows 10 Thunderbolt support: EnabledStep7: Please wait 20 seconds.Step8: Press F10 button for saving change and exit. Please refer setp3.Step9: Install Windows 10 OS again and then must be connect Thunderbolt device on ThunderboltM3 card.Step10: Please install driver for this unknown device- “Base System device” in device manager.•It is driver for ThunderboltM3 on MSI website.•https:///PC-component/support/ThunderboltM3Step11: It will be showed “Thunderbolt(TM) control” in device manager after installing driver.Step12: Please install “Thunderbolt Control Center” or “ Thunderbolt Software” on Microsoft store.Step13: Please setting “Always Connect” in “Thunderbolt Control Center” and then also click “OK” button.Step14-1: Thunderbolt SoftwareStep14-2: Please setting “Always Connect” in “Thunderbolt Software” and then device will be showed.Reference:•It is manual for ThunderboltM3 on MSI website.•https:///PC-component/support/ThunderboltM3#down-manual•It is driver for ThunderboltM3 on MSI website.•https:///PC-component/support/ThunderboltM3•It is compatibility device for ThunderboltM3 on MSI website, please click “compatibility” button first.•https:///PC-component/support/ThunderboltM3#support-testIntel® Extreme Masters Certified PC。

IBM TS4300 Tape LibraryProduct GuideIBM TS4300 Tape Library (Machine Type 6741) combines IBM enterprise tape automation and reliability with open system affordability. It is a high-density, highly scalable, easy-to-manage solution designed to keep data securely stored long-term, while helping reduce the costs associated with data center space and utilities.The TS4300 utilizes modular design to meet growing long-term storage requirements. Starting with a single 3U base module, customers can scale the tape library by adding up to six 3U expansion modules for the overall capacity of up to 280 LTO cartridges. Each 3U base or expansion module can house up to 40 cartridges in two removable magazines.Each 3U module can accommodate up to three half-height tape drives or a combination of one half-height tape drive and one full-height tape drive. The choice of the tape drives includes IBM LTO Ultrium 9, 8, 7, or 6 Tape Drives with SAS or Fibre Channel host connectivity interfaces.Figure 1. IBM TS4300 Tape Library: Base module (bottom) with one expansion module (top)Did you know?Featuring the latest LTO Ultrium 9 technology, the TS4300 Tape Library provides up to 5.04 PB of native backup storage.Lenovo can be your trusted partner that offers "one stop shop" and single point of contact for delivery of leading edge technologies and innovations from Lenovo and other leading IT vendors. These offerings can satisfy the wide range of your end-to-end IT infrastructure needs, including end-user devices, servers, storage, networking, services, management software, and financing.Click here to check for updatesFigure 2. Front view of the TS4300 Tape Library base moduleThe following figure shows the front view of the TS4300 Tape Library expansion moduleFigure 3. Front view of the TS4300 Tape Library expansion moduleThe following figure shows the rear view of the TS4300 Tape Library base moduleFigure 4. Rear view of the TS4300 Tape Library base moduleThe following figure shows the rear view of the TS4300 Tape Library expansion module.Figure 5. Rear view of the TS4300 Tape Library expansion moduleSystem specificationsThe following table lists the TS4300 Tape Library system specifications.Table 1. System specificationsAttribute SpecificationForm factor Base module: 3U rack-mount or stand-aloneExpansion module: 3U rack-mount; up to 6 expansion modules7-module library: 21U rack-mountDrive technology LTO Ultrium 9, 8, 7, and 6 Full-High (FH) and Half-High (HH) tape drives Drive interface UItrium LTO9 12 Gbps SAS Half and Full High drivesUItrium LTO8 6 Gbps SAS Half-High driveFigure 6. TS4300 tape library connectivity topologyTape drivesEach TS4300 module (base or expansion) can accommodate up to three LTO Ultrium half-height tape drives or a combination of one LTO Ultrium half-height tape drive and one LTO Ultrium full-height tape drive.The following table lists the supported tape drives for the TS4300.Table 4. Tape drive optionsPart number Featurecode DescriptionMaximumquantityper moduleFull Height 8 Gb Fibre Channel02JH837BLW0LTO 9 FH Fibre Channel Drive1 01KP954B1ET LTO 8 FH Fibre Channel Drive1 01KP938B16Y LTO 7 FH Fibre Channel Drive1 Half Height 8 Gb Fibre Channel02JH835BLVZ LTO 9 HH Fibre Channel Drive3 01KP952B1ER LTO 8 HH Fibre Channel Drive3 01KP936B16W LTO 7 HH Fibre Channel Drive3 Full Height 12 Gb SAS02JH838BLW6LTO 9 FH SAS Drive3 Half Height 12 Gb SAS02JH836BLW7LTO 9 HH SAS Drive3Half High 6 Gb SAS 01KP953B1ES LTO 8 HH SAS Drive 301KP937B16X LTO 7 HH SAS Drive3Tape drive support (Wrap tool)01KP939B16R Fibre Tape Drive Support (Wrap Tool)701KP940B16S SAS Tape Drive Support (Wrap Tool) (for LTO8, LTO7)702JH839BLW8Mini SAS-HD Tape Drive Support (wrap tool) (for LTO9)7Part number Feature codeDescription Maximumquantity per module A wrap tool is a loopback connector that provides the ability to run port tests and isolate sled problems in tape drives. The Fibre Tape Drive Support is required when at least one Fibre Channel tape drive is installed in the tape library, and the SAS Tape Drive Support is required when at least one SAS tape drive is installed in the tape library.A SAS cable or Fibre Channel cable is required to attach a tape drive in the TS4300 Tape Library to a host.The following table lists supported cable options for LTO9 connectivity.Table 5. SAS cables for LTO9DescriptionPart number Feature code Maximum quantity SAS connectivity cables: Mini-SAS HD (HBA SFF-8644 host) to Mini-SAS HD (HBA SFF-8644 tape drive)3 m Mini-SAS HD/Mini-SAS HD 1x Cable(from HBA with SFF-8644 to tape drive (LTO-9) with SFF-8644)02JH830BLW311.5 m Mini-SAS HD/Mini-SAS HD 1x Cable(from HBA with SFF-8644 to tape drive (LTO-9) with SFF-8644)02JH831BLW41 3 m Mini-SAS HD/Mini-SAS HD (Y) 2X Cable02JH832BLW51The following table lists supported cable options for LTO8 and LTO7 connectivity.Table 6. Cable options for LTO 8 & LTO 7DescriptionPart number Feature code Maximum quantity per drive SAS connectivity cables - Mini-SAS (SFF-8088 host) to Mini-SAS (SFF-8088 tape)Mini-SAS/Mini-SAS 4x Interposer (from HBA with SFF-8088 to max 4 cables with SFF-8088)00NA077AS0Y 1*2 m Mini-SAS/Mini-SAS 1x Cable (host SFF-8088 to target SFF-8088)00NA009AS0Z 2SAS connectivity cables - Mini-SAS HD (SFF-8644 host) to Mini-SAS (SFF-8088 tape)HD-SAS Cable to Mini-SAS (4 m)00NV419AS102Y SAS HD to Mini-SAS Cable (3 m)00NV420AS122**Fibre Channel connectivity cable8s 10 m LC-LC Fibre Cable01KP929B16M2* The interposer is used on the host side to connect up to four SAS tape drives to a single Mini-SAS x4 port on a SAS HBA with up to four 2 m Mini-SAS to Mini-SAS cables (part number 00NA009).** The Y SAS HD cable is used to connect up to two SAS tape drives to a single Mini-SAS HD x4 port on a SAS HBA.Tape mediaTrademarksLenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. A current list of Lenovo trademarks is available on the Web athttps:///us/en/legal/copytrade/.The following terms are trademarks of Lenovo in the United States, other countries, or both:Lenovo®Lenovo ServicesThinkSystem®The following terms are trademarks of other companies:Linux® is the trademark of Linus Torvalds in the U.S. and other countries.Hyper-V®, Microsoft®, Windows Server®, and Windows® are trademarks of Microsoft Corporation in the United States, other countries, or both.Other company, product, or service names may be trademarks or service marks of others.。

Sophos UTM 9 and XG Firewall MigrationFrequently Asked QuestionsWhat is the difference between SG and XG?As you know, Sophos SG Series appliances with UTM 9 firmware are our leading and award-winning Unified Threat Management (UTM) platform. Sophos UTM has a long and successful history that extends back several years. We will continue to develop and support this platform. You can learn more about Sophos UTM 9 and the SG Series and what makes them so great here.Sophos XG Firewall, is our new firewall platform, that combines some of the great technology from UTM 9 with a variety of new technology including support for the new Sophos Security Heartbeat™, a new user interface, improved user-based policies and reporting, and much more. It comes pre-installed on XG Series appliances but you can also upgrade your SG Series appliances (more on that below).You can learn more about Sophos XG Firewall here: UTM or Next-Gen Firewall. What’s the difference between the SG Series and XG Series hardware appliances?SG Series appliances come pre-installed with UTM 9 firmware. XG Series appliances come pre-installed with XG Firewall firmware. Otherwise, the hardware specifications are identical.Can I migrate from UTM 9 to the new XG Firewall?Yes. As a Sophos UTM 9 customer with a valid license, you are entitled to migrate to XG Firewall when the timing is right for you. We strongly urge customers to be patient and wait for the automated migration tools as it will provide the best experience.As an existing UTM 9 customer wishing to upgrade what should I do?We suggest all UTM 9 customers spend some time to get familiar with the new XG Firewall utilizing the free trial option while patiently awaiting the migration tools to make the transition as seamless as possible.Do I have to migrate from UTM 9 to XG Firewall?No. While we are confident that most Sophos UTM 9 customers will want to take advantage of many of the great new features and benefits of XG Firewall over time, there is certainly no rush, and you don’t have to migrate if you don’t want to.Will you continue to develop and support UTM 9?Yes. Sophos UTM 9 will see continued development and support with a couple of new releases already in the planning stages.Will the new XG Firewall firmware run on my existing hardware or virtual environment?Sophos XG Firewall runs perfectly on all Sophos SG Series hardware appliances, as wellas the same Intel compatible hardware and the same virtual environments as UTM 9. XG Firewall is not currently compatible with Amazon Web Services, but we plan to add support for AWS and Azure cloud deployments soon.Customers with UTM Series or ASG Series hardware (prior to the SG Series) interested in migrating to XG Firewall should talk to their Sophos Partner about doing a hardware refresh to one of the XG Series that come pre-installed with XG Firewall.When can I migrate from UTM 9 to XG Firewall?We strongly recommend that customers wait until the migration tools are available. This will ensure a smooth migration. We recommend working with your preferred Sophos Partner to plan your migration when the time is right.Is there a license fee associated with migrating?No. Sophos is pleased to enable you to switch your license from UTM 9 to XG Firewall at no extra charge.What are the various migration phases and tools available?In order to make migration as smooth as possible, we are developing a series of migration tools that will be rolled out in phases following the launch of XG Firewall. Watch the Sophos Corporate Blog for migration news, tools, and help or contact your Sophos Partner.Here are the migration phases:Migration at Launch: While we strongly encourage existing customers to wait until Phase 1 or 2, early adopters who wish to migrate to XG Firewall following launch can do a manual migration. There will be no migration tools available during this phase so you will be setting up and configuring your XG Firewall from a fresh install.Phase 1 Migration: is in planning and we anticipate being able to offer beta migration tools by mid-2016. The process will involve manually taking a backup of your UTM 9 device and uploading it to the Cloud Migration Service for conversion, making necessary adjustments, and then exporting it as a configuration for XG Firewall.Phase 2 Migration: is planned to coincide with an update to XG Firewall in mid-2016. It will enable UTM 9.4 customers to use an option in Webadmin to initiate a migration adding some automation and less manual process with options to retain some quarantine items. Phase 3 Migration: Later in 2016 we plan to simplify the migration process further with support for multiple device migration and more automation.Are there UTM 9 features I need that are not in XG Firewall?There are a few feature gaps you should be aware of. If you are dependent on any of these features, you will want to wait until the gaps are closed in a subsequent release of XG Firewall. Watch the Sophos Corporate Blog for XG Firewall updates and news.Here are the most significant initial feature gaps:ÌMulti-node clustering of 3 or more appliances is not supported initially(two appliance clustering for Active-Active or Active-Passive is supported)ÌClustering of “w” (integrated wireless) models is not supported initiallyÌSite-to-Site RED Tunnels are not supported initially(RED devices are fully supported in XG Firewall but not RED tunnels between firewalls)ÌA couple of Advanced Web Protection features are not supportedinitially including block page override using a password and category-based quota time policies (global quotas are supported)ÌTwo-Factor Authentication is not supported initiallyÌSophos Mobile Control integration is not supported initiallyÌSophos Endpoint Deployment and Management from within the UTMis not supported (customers are encouraged to switch to SophosCloud Endpoint to take advantage of Security Heartbeat™)Sophos UTM 9 and XG Firewall Migration FAQCan I centrally manage both UTM 9 and XG Firewall with the new Sophos Firewall Manager?Sophos UTM Manager (SUM) is the centralized management platform for UTM 9 and is still supported for managing multiple UTM 9 devices. It cannot manage XG Firewall devices.Sophos Firewall Manager (SFM) is the new centralized management platform for XG Firewall. It cannot manage UTM 9 devices and therefore, if you plan to run a mix of UTM 9 and XG Firewall devices, you will need both SUM and SFM for centralized management respectively.Can I centrally report on both UTM 9 and XG Firewall with the new Sophos iView?Yes. The new version of Sophos iView can provide consolidated reports for UTM 9, XG Firewall, and CyberoamOS devices.How can I take advantage of the new Security Heartbeat™?Sophos Security Heartbeat requires both Sophos XG Firewall and Sophos Cloud Endpoint. Learn more about Security Heartbeat.Where can I get further information?Please contact your Sophos Partner should you have any further questions and monitor the Sophos Corporate Blog for ongoing news and updates related to your Sophos products. You can sign up for the Sophos Blog newsletter by entering your email address in the sign-up field in the upper right corner of the blog homepage. You can also sign up for our RSS feed.Oxford, UK | Boston, USA© Copyright 2015. Sophos Ltd. All rights reserved.Registered in England and Wales No. 2096520, The Pentagon, Abingdon Science Park, Abingdon, OX14 3YP, UKSophos is the registered trademark of Sophos Ltd. All other product and company names mentioned aretrademarks or registered trademarks of their respective owners.。

mylivePCThinkCentreM920xTinyThinkStationP330T。

sThinkStation P330 Tiny 更新驱动下载 / bios / chipset / thunderbolt / amtfwC:\Users\Administrator\Desktop\p330 的⽬录2021/09/02 00:25 <DIR> .2021/09/02 00:25 <DIR> ..2021/09/01 23:52 47,558,248 AMT-u8amt62us14.exe2021/09/01 23:53 5,998,432 AMTFW-12.0.81.1753_corporate.exe2021/09/01 23:53 7,995,752 BIOS-M1UJY66USA.exe2021/09/01 23:53 80,726,016 BIOSCD-M1UJ966USA.ISO2021/09/01 23:54 1,292,392 Chipset-u2chp41us14.exe2021/09/01 23:53 58,044,392 nvmessd-fw-fwnva40w.exe2021/09/01 23:53 811,728 SIO-FW-m1uct18usa.exe2021/09/01 23:53 8,307,216 systemupdate507-2021-07-13.exe2021/09/01 23:54 2,284,856 Thunderbolt-u1tbt02us17.exe问题1：ThinkStation电脑如何升级BIOS程序？解决1：操作步骤:重要提⽰：由于BIOS的版本或者在升级过程中出错，可能会造成不可恢复的后果。

本⽂提供的升级过程为标准操作，供您参考，因为⽆法确定您操作的正确性，我们强烈建议，BIOS的升级⼯作由计算机专业技术⼈员来完成。

STM32F103xB中等容量增强型，32位基于ARM 核心的带64或128K 字节闪存的微控制器USB 、CAN 、7个定时器、2个ADC 、9个通信接口功能■ 内核：ARM 32位的Cortex™-M3 CPU− 最高72MHz 工作频率，在存储器的0等待周期访问时可达1.25DMips/MHz(Dhrystone 2.1)− 单周期乘法和硬件除法 ■ 存储器− 从64K 或128K 字节的闪存程序存储器 − 高达20K 字节的SRAM ■ 时钟、复位和电源管理− 2.0～3.6伏供电和I/O 引脚 − 上电/断电复位(POR/PDR)、可编程电压监测器(PVD)− 4～16MHz 晶体振荡器− 内嵌经出厂调校的8MHz 的RC 振荡器 − 内嵌带校准的40kHz 的RC 振荡器 − 产生CPU 时钟的PLL− 带校准功能的32kHz RTC 振荡器 ■ 低功耗− 睡眠、停机和待机模式− V BAT 为RTC 和后备寄存器供电■ 2个12位模数转换器，1μs 转换时间(多达16个输入通道)− 转换范围：0至3.6V − 双采样和保持功能 − 温度传感器 ■ DMA ：− 7通道DMA 控制器− 支持的外设：定时器、ADC 、SPI 、I 2C 和USART ■ 多达80个快速I/O 端口− 26/37/51/80个I/O 口，所有I/O 口可以映像到16个外部中断；几乎所有端口均可容忍5V 信号■ 调试模式− 串行单线调试(SWD)和JTAG 接口■ 多达7个定时器− 3个16位定时器，每个定时器有多达4个用于输入捕获/输出比较/PWM 或脉冲计数的通道和增量编码器输入− 1个16位带死区控制和紧急刹车，用于电机控制的PWM 高级控制定时器− 2个看门狗定时器(独立的和窗口型的) − 系统时间定时器：24位自减型计数器 ■ 多达9个通信接口− 多达2个I 2C 接口(支持SMBus/PMBus) − 多达3个USART 接口(支持ISO7816接口，LIN ，IrDA 接口和调制解调控制) − 多达2个SPI 接口(18M 位/秒) − CAN 接口(2.0B 主动) − USB 2.0全速接口 ■ CRC 计算单元，96位的芯片唯一代码 ■ ECOPACK ®封装 表1 器件列表参 考 基本型号STM32F103x8STM32F103C8、STM32F103R8、STM32F103V8、STM32F103T8 STM32F103xBSTM32F103RB 、STM32F103VB 、STM32F103TB本文档英文原文下载地址： /stonline/products/literature/ds/13587.pdf目录1介绍 (4)2规格说明 (5)2.1器件一览 (5)2.2系列之间的全兼容性 (6)2.3概述 (6)2.3.1ARM®的Cortex™-M3核心并内嵌闪存和SRAM (6)2.3.2内置闪存存储器 (6)2.3.3CRC(循环冗余校验)计算单元 (6)2.3.4内置SRAM (7)2.3.5嵌套的向量式中断控制器(NVIC) (7)2.3.6外部中断/事件控制器(EXTI) (7)2.3.7时钟和启动 (7)2.3.8自举模式 (7)2.3.9供电方案 (7)2.3.10供电监控器 (8)2.3.11电压调压器 (8)2.3.12低功耗模式 (8)2.3.13DMA (8)2.3.14RTC(实时时钟)和后备寄存器 (8)2.3.15定时器和看门狗 (9)2.3.16I2C总线 (10)2.3.17通用同步/异步收发器(USART) (10)2.3.18串行外设接口(SPI) (10)2.3.19控制器区域网络(CAN) (10)2.3.20通用串行总线(USB) (10)2.3.21通用输入输出接口(GPIO) (10)2.3.22ADC(模拟/数字转换器) (10)2.3.23温度传感器 (11)2.3.24串行单线JTAG调试口(SWJ-DP) (11)3引脚定义 (13)4存储器映像 (21)5电气特性 (22)5.1测试条件 (22)5.1.1最小和最大数值 (22)5.1.2典型数值 (22)5.1.3典型曲线 (22)5.1.4负载电容 (22)5.1.5引脚输入电压 (22)5.1.6供电方案 (23)5.1.7电流消耗测量 (23)5.2绝对最大额定值 (23)5.3工作条件 (25)5.3.1通用工作条件 (25)5.3.2上电和掉电时的工作条件 (25)5.3.3内嵌复位和电源控制模块特性 (25)5.3.4内置的参照电压 (26)5.3.5供电电流特性 (26)5.3.6外部时钟源特性 (33)5.3.7内部时钟源特性 (37)5.3.8PLL特性 (38)5.3.9存储器特性 (38)5.3.10EMC特性 (38)5.3.11绝对最大值(电气敏感性) (39)5.3.12I/O端口特性 (40)5.3.13NRST引脚特性 (42)5.3.14TIM定时器特性 (43)5.3.15通信接口 (43)5.3.16CAN(控制器局域网络)接口 (47)5.3.1712位ADC特性 (47)5.3.18温度传感器特性 (51)6封装特性 (52)6.1封装机械数据 (52)6.2热特性 (59)6.2.1参考文档 (59)6.2.2选择产品的温度范围 (59)7订货代码 (61)8版本历史 (62)1 介绍本文给出了STM32F103x8和STM32F103xB中等容量增强型产品的订购信息和器件的机械特性。

M-TRACKHUBContenu de la boîteM-Track HubAdaptateur d’alimentationCâble USBGuide d’utilisationConsignes de sécurité et informations concernant la garantieAssistancePour les dernières informations concernant ce produit (la configuration système minimale requise, la compatibilité, etc) et l’enregistrement du produit, veuillez visitez le site . Pour toute assistance supplémentaire, veuillez visiter le site /support.Utilisateurs de Windows : Avant de brancher le M-Track Hub à votre ordinateur pour la première fois, vous devez installer les pilotes :1. Veuillez visiter /drivers et télécharger le dernier pilote M-Track Hub pour votresystème d'exploitation.2. Ouvrez le fichier téléchargé, puis double-cliquez sur le fichier d'installation du pilote.3. Suivez les instructions à l’écran pour installer les pilotes.Les éléments qui ne figurent pas dans la section Présentation > Contenu de la boîte sont vendus séparément.Exemple 1Important : N'oubliex pas de sélectionner M-Track Hub comme votre carte son dans le panneau de configuration ou d'un système préférences .Exemple 2Important : N'oubliez pas de sélectionner M-Track Hub comme votre interface dans les préférences, options, configuration de périphérique, etc., de votre logiciel audionumérique (DAW).Moniteurs amplifiésMoniteurs amplifiés Panneau arrière TabletteDisque dur USBPanneau arrière1. Port USB : Ce connecteur permetd’envoyer des données audio, MIDI, oud’autres vers/depuis un ordinateur. Utilisez le câble USB inclus pour brancher le M-Track Hub à votre ordinateur. Le M-Track Hub requiert une connexion USB 2.0 (ouultérieure). 2.Interrupteur d'alimentation : Cette touche permet de mettre le M-Track Hub sous et hors tension. 3. Sorties principales : Utilisez des câbles TRS 6,35 mm (1/4 po) standard pour relier cessorties à vos moniteurs amplifiés, à un système d'amplification, etc. Leurs niveaux sont contrôlés par le bouton Monitor (Moniteur). Panneau avant1. Sortie casque d'écoute : Des casquesd'écoute 6,35 mm (1/4 po) TRS peuventêtre branchés à cette sortie2. Volume casque d'écoute : Ces boutonspermettent d'ajuster le niveau des sorties casque d'écoute . 3. Sorties USB hub : Ces sorties permettent de brancher des périphériques USBsupplémentaires (contrôleurs, disques durs, etc.) En plus d’être une interface audio, ces ports permettent au M-Track Hub de fonctionner comme concentrateur USB. Cela peut être utile lorsque vous manquez de ports USB sur votre ordinateur.Important : Pour utiliser les sorties USB hub, M-Track Hub doit être connecté à adaptateur d’alimentation.Panneau supérieur1. Bouton Moniteur : Ce bouton permet derégler le volume des sorties principalesreliées à des moniteurs amplifiés ou à unsystème d'amplification.Inputs 3 USB portsOutputs 3 1/4” (6.35 mm) TRS1 USB portPower 5 V, 2.5 A, center-positiveDimensions (width x depth x height)4.5” x 4.2” x 2.8”113 mm x 107 mm x 70 mmWeight 0.75 lbs.0.34 kgSpecifications are subject to change without notice.M-Audio is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries. Windows is a registered trademark of Microsoft Corporation in the United States and othercountries.All other product or company names are trademarks or registered trademarks of their respective owners.。