当前位置：文档之家 › HLMP-C223-L00XX中文资料

HLMP-C223-L00XX中文资料

  • 格式：pdf
  • 大小：85.47 KB
  • 文档页数：10

DescriptionThese non-diffused lamps are designed to produce a bright light source and smooth radiationpattern. A slight tint is added to the lens for easy color identification.This lamp has been designed with aHLMP-C115, HLMP-C117, HLMP-C123, HLMP-C215, HLMP-C223,HLMP-C315, HLMP-C323, HLMP-C415, HLMP-C423, HLMP-C515,HLMP-C523, HLMP-C615, HLMP-C623Features•Very high intensity •Exceptional uniformity •Microtint lens for color identification•Consistent viewability All colors: AlGaAs RedHigh Efficiency Red Yellow Orange GreenEmerald Green •15° and 25° family•Tape and reel options available •Binned for color and intensity Applications•Ideal for backlighting front panels*•Used for lighting switches •Adapted for indoor and outdoor signsAgilentT-13/4 Super Ultra-Bright LED LampsData Sheet20mil lead frame, enhanced flange, and tight meniscus controls, making it compatible with radial lead automated insertion equipment.Selection GuidePart Number Luminous Intensity Iv (mcd) Color2θ1/2[1]Standoff Leads HLMP-Min.Max.DH AS AlGaAs15No C115290.0–C115-O00xx290.0–C115-OP0xx290.01000.0Yes C117-OP0xx290.01000.025No C12390.2–C123-L00xx90.2–Red15No C215138.0–C215-M00xx138.0–C215-MN0xx138.0400.025No C22390.2–C223-L00xx90.2–C223-MN0xx138.0400.0 Yellow15No C315147.0–C315-L00xx147.0–C315-LM0xx147.0424.025No C32396.2–C323-K00xx96.2–C323-KL0xx96.2294.0 Orange15No C415138.0–C415-M00xx138.0–C415-M0D0xx138.0–C415-MN0xx138.0400.025No C42390.2–C423-L00xx90.2–C423-LM0xx90.2276.0 Green15No C515170.0–C515-L00xx170.0C515-LM0xx170.0490.025No C52369.8–C523-J00xx69.8–C523-KL0xx111.7340.0 Emerald Green15No C61517.0–C615-G00xx17.0–25No C623 6.7–C623-E00xx 6.7–Part Numbering SystemHLMP - C x xx - x x x xxMechanical Options00: Bulk01: Tape & Reel, Crimped Leads02: Tape & Reel, Straight LeadsB2: Right Angle Housing, Even LeadsUQ: Ammo Pack, Horizontal LeadsColor Bin Options0: Full Color Bin DistributionD: Color Bins 4 & 5 onlyMaximum Iv Bin Options0: Open (No Maximum Limit)Others: Please refer to the Iv Bin TableMinimum Iv Bin OptionsPlease refer to the Iv Bin TableViewing Angle & Standoffs Options15: 15 Degree, without Standoffs17: 15 Degree, with Standoffs23: 25 Degree, without StandoffsColor Options1. AS AlGaAs Red2. High Efficiency Red3. Yellow4. Orange5. Green6. Emerald GreenPackage OptionsC: T-1 3/4 (5 mm)Absolute Maximum Ratings at T A = 25°CHighHighDH AS Efficiency Performance AlGaAs Red and Green and ParameterRed Orange Yellow Emerald Green Units DC Forward Current [1]30302030mA Transient Forward Current [2]500500500500mA (10 µsec Pulse)Reverse Voltage (Ir = 100 µA)5555V LED Junction Temperature 110110110110°C Operating Temperature Range –20 to +100–55 to +100–20 to +100°C Storage Temperature Range –55 to +100°CWave Soldering Temperature 250°C for 3 seconds [1.59 mm (0.063 in.) from body]Lead Solder Dipping Temperature 260°C for 5 seconds[1.59 mm (0.063 in.) from body]Notes:1. See Figure 5 for maximum current derating vs. ambient temperature.2. The transient current is the maximum nonrecurring peak current the device can withstand without damaging the LED die and wire bond.Package DimensionsHLMP-Cx15 and HLMP-Cx23HLMP-Cx17(0.039)NOTES:1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).2. LEADS ARE MILD STEEL, SOLDER DIPPED.3. AN EPOXY MENISCUS MAY EXTEND ABOUT 0.5 mm (0.020 in.) DOWN THE LEADS.± 0.20± 0.008)Electrical Characteristics at T A = 25°CForward Reverse Capacitance Speed of ResponseVoltage Breakdown C (pF)Thermalτs (ns)Vf (Volts)Vr (Volts)Vf = 0Resistance Time Constant@ If = 20 mA@ Ir = 100 µA f = 1 MHz RθJ-PIN e-t/τsPart Number Typ.Max.Min.Typ.(°C/W)Typ.HLMP-C115 1.8 2.253021030HLMP-C117HLMP-C123HLMP-C215 1.9 2.651121090HLMP-C223HLMP-C315 2.1 2.651521090HLMP-C323HLMP-C415 1.9 2.654210280HLMP-C423HLMP-C515 2.2 3.0518210260HLMP-C523HLMP-C615 2.2 3.0518210260HLMP-C623Optical Characteristics at T A = 25°CLuminous Color,ViewingIntensity Peak Dominant Angle LuminousIv (mcd)Wavelength Wavelength2θ1/2Efficacy@ 20 mA[1]λpeak (nm)λd[2] (nm)(Degrees)[3]ηvPart Number Min.Typ.Typ.Typ.Typ.(lm/w) HLMP-C1152906006456371180HLMP-C117HLMP-C1239020026HLMP-C215138300635626171459017023HLMP-C315146300583585175009617025HLMP-C415138300600602173809017023HLMP-C515170300568570205956917028HLMP-C61517455585602065662728Notes:1. The luminous intensity, Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not bealigned with this axis.2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device.3. 2θ1/2 is the off-axis angle where the luminous intensity is 1/2 the on-axis intensity.Figure 1. Relative intensity vs. wavelength.Figure 2. Forward current vs. forward voltage (non-resistor lamp).Figure 3. Relative luminous intensity vs. forward current.WAVELENGTH – nmR E L A T I V E I N T E N S I T Y1.00.50I F – F O R W A R DC U R R E N T – m AV F – FORWARD VOLTAGE – VI F – F O R W A R D C U R R E N T – m AV F – FORWARD VOLTAGE – VHIGH EFFICIENCY RED, ORANGE,YELLOW, AND HIGH PERFORMANCEGREEN, EMERALD GREENR E L A T I V E L U M I N O U S I N TE N S I T Y (N O R M A L I Z E D A T 20 m A )I F – DC FORWARD CURRENT – mA R E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D A T 20 m A )0I DC – DC CURRENT PER LED – mA10201.60.80.4515301.2250.20.61.01.4HER, ORANGE, YELLOW, AND HIGH PERFORMANCE GREEN, EMERALD GREENFigure 5. Maximum forward dc current vs. ambient temperature. Derating based on T j MAX = 110°C.Figure 4. Relative efficiency (luminous intensity per unit current) vs. peak current.Figure 6. Relative luminous intensity vs. angular displacement. 15 degree family.R E L A T I V E E F F I C I E N C Y (N O R M A L I Z E D A T 20 m A )0I PEAK – PEAK FORWARD CURRENT – mA0.60.8300201001.21.00.20.45020010DH As AlGaAs REDηP E A K – R E L A T I V E E F F I C I E N C Y (N O R M A L I Z E D A T 20 m A )I PEAK – PEAK FORWARD CURRENT – mAHER, ORANGE, YELLOW, HIGHPERFORMANCE GREEN, EMERALD GREENI F – F O R W A R D C U R R E NT – m AT A – AMBIENT TEMPERATURE – °C DH As AlGaAs REDI F – F O R W A R D C U R R E N T – m AT A – AMBIENT TEMPERATURE – °CHER, ORANGE, YELLOW, AND HIGH PERFORMANCE GREEN, EMERALD GREEN N O R M A L I Z E D L U M I N O U S I N T E N S I T Y10ANGULAR DISPLACEMENT – DEGREES0.80.60.50.70.2450.10.30.4403530252010515-5-10-15-20-25-30-35-40-450.9Figure 7. Relative luminous intensity vs. angular displacement. 25 degree family.Intensity Bin Limits Intensity Range (mcd)ColorBin Min.Max.L 101.5162.4M 162.4234.6N 234.6340.0O 340.0540.0P 540.0850.0Q 850.01200.0R 1200.01700.0Red/OrangeS 1700.02400.0T 2400.03400.0U 3400.04900.0V 4900.07100.0W 7100.010200.0X 10200.014800.0Y 14800.021400.0Z 21400.030900.0L 173.2250.0M 250.0360.0N 360.0510.0O 510.0800.0P 800.01250.0YellowQ 1250.01800.0R 1800.02900.0S 2900.04700.0T 4700.07200.0U 7200.011700.0V 11700.018000.0W18000.027000.0N O R M A L I Z E D L U M I N O U S I N T E N S I T Y10ANGULAR DISPLACEMENT – DEGREES0.80.60.50.70.2450.10.30.4403530252010515-5-10-15-20-25-30-35-40-450.9Intensity Bin Limits, continuedIntensity Range (mcd) Color Bin Min.Max.E7.612.0F12.019.1G19.130.7H30.749.1I49.178.5J78.5125.7K125.7201.1L201.1289.0 Green/M289.0417.0 Emerald Green N417.0680.0O680.01100.0P1100.01800.0Q1800.02700.0R2700.04300.0S4300.06800.0T6800.010800.0U10800.016000.0V16000.025000.0W25000.040000.0 Maximum tolerance for each bin limit is ± 18%.Color CategoriesLambda (nm)Color Category #Min.Max.6561.5564.55564.5567.5 Green4567.5570.53570.5573.52573.5576.51582.0584.53584.5587.0 Yellow2587.0589.54589.5592.05592.0593.01597.0599.52599.5602.03602.0604.5 Orange4604.5607.55607.5610.56610.5613.57613.5616.58616.5619.5 Tolerance for each bin limit is ± 0.5 nm.Mechanical Option MatrixMechanical Option Code Definition00Bulk Packaging, minimum increment 500 pcs/bag01Tape & Reel, crimped leads, minimum increment 1300 pcs/bag02Tape & Reel, straight leads, minimum increment 1300 pcs/bagB2Right Angle Housing, even leads, minimum increment 500 pcs/bagUQ Ammo Pack, horizontal leads, in 1K minimum incrementNote:All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent representative for further clarification/information./semiconductorsFor product information and a complete list ofdistributors, please go to our web site.For technical assistance call:Americas/Canada: +1 (800) 235-0312 or(916) 788-6763Europe: +49 (0) 6441 92460China: 10800 650 0017Hong Kong: (+65) 6756 2394India, Australia, New Zealand: (+65) 6755 1939Japan: (+81 3) 3335-8152 (Domestic/Interna-tional), or 0120-61-1280 (Domestic Only)Korea: (+65) 6755 1989Singapore, Malaysia, Vietnam, Thailand,Philippines, Indonesia: (+65) 6755 2044Taiwan: (+65) 6755 1843Data subject to change.Copyright © 2004 Agilent Technologies, Inc.Obsoletes 5965-6165ENovember 11, 20045988-2149EN。

合集下载

HLMA-CX00中文资料

HLMA-CX00中文资料

1-37HDescriptionThese untinted, non-diffused, solid state lamps utilize the latest absorbing/transparent substrate aluminum indium gallium phos-phide (AS/TS AlInGaP) LED tech-nology . These materials have a very high luminous efficiency , capable of producing high light output over a wide range of drive currents. In addition, these LED lamps are at wavelengths ranging from amber to reddish orange and at viewing angles ranging from 7 to 45degrees.Features• Outstanding LED Material Efficiency• High Light Output over a Wide Range of Currents • Low Electrical Power Dissipation• CMOS/MOS Compatible • Colors: 590/592 nm Amber,615/617nm and 622 nm Reddish-Orange• Variety of Packages AvailableApplications• Outdoor Message Boards • Safety Lighting Equipment • Signaling Applications • Emitter for Emitter/Detector Applications• Changeable Message Signs • Portable Equipment • Medical Equipment • Automotive Lighting• Alternative to Incandescent LampsSunPower Series HLMA-CX00 Series HLMA-DX00 Series HLMA-KX00 Series HLMT-CX00 Series HLMT-DX00 SeriesT-13/4 (5 mm), T-1 (3 mm), High Performance AlInGaP LED Lamps Technical Data5963-2323E1-38NOTES:1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).2. THE LEADS ARE MILD STEEL, SOLDER DIPPED.3. AN EPOXY MENISCUS MAY EXTEND ABOUT 1 MM (0.040") DOWN THE LEADS, UNLESS OTHERWISE NOTED.Package Dimensions1.27 (0.050)NOTESABCAbsolute Maximum Ratings at T A = 25°C(T-13/4 Package)DC Forward Current[1,4,5]...........................................................50 mAPeak Forward Current[2]...........................................................200 mATime Average Input Power[2]...................................................103 mWTransient Forward Current[3] (10 µs Pulse)..............................500 mAReverse Voltage (I R = 100 µA).........................................................5 VOperating Temperature Range..........................................-40 to 100°CStorage Temperature.........................................................-40 to 120°CJunction Temperature.................................................................130°CSoldering Temperature..........................................260°C for 5 seconds[1.59 mm (0.06 in.) below seating plane]Notes:1. Derate linearly as shown in Figure 4.2. Any pulsed operation cannot exceed the Absolute Max Peak Forward Current or theMax Allowable Time Average Power as specified in Figure 5.3. The transient peak current is the maximum nonrecurring peak current the device canwithstand without damaging the LED die and wire bonds.4. Drive Currents between 10 and 30 mA are recommended for best long termperformance.5. Operation at currents below 10 mA is not recommended, please contact yourHewlett-Packard sales representative.Absolute Maximum Ratings at T A = 25°C (T-1 Package)DC Forward Current[1,4,5]...........................................................50 mAPeak Forward Current[2]...........................................................200 mATime Average Input Power[2]...................................................103 mWTransient Forward Current[3] (10 µs Pulse)..............................500 mAReverse Voltage (I R = 100 µA).........................................................5 VOperating Temperature Range..........................................-40 to 100°CStorage Temperature.........................................................-40 to 100°CJunction Temperature..................................................................110°CSolder Temperature................................................260°C for 5 seconds[1.59 mm (0.06 in.) below seating plane]Notes:1. Derate linearly as shown in Figure 4.2. Any pulsed operation cannot exceed the Absolute Max Peak Forward Current or theMax Allowable Time Average Power as specified in Figure 5.3. The transient peak current is the maximum nonrecurring peak current the device canwithstand without damaging the LED die and wire bonds.4. Drive Currents between 10 mA and 30 mA are recommended for best long termperformance.5. Operation at currents below 10 mA is not recommended, please contact yourHewlett-Packard sales representative.1-39Optical Characteristics at T A = 25°CTS-AlInGaP T-13/4Notes:1. The luminous intensity, I V, is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axisof the lamp package.2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device.3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity.4. The luminous intensity, I v, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation patternmay not be aligned with this axis.AS-AlInGaP T-13/4Notes:1. The luminous intensity, I V, is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axisof the lamp package.2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device.3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity.4. The luminous intensity, I v, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation patternmay not be aligned with this axis.AS-AlInGaP T-1Notes:1. The luminous intensity, I v, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation patternmay not be aligned with this axis.2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device.3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity.1-401-41AS-AlInGaP T-1Speed of Forward ReverseCapacitanceResponse Voltage Breakdown C (pF)τs (ns)Part V F (Volts)V R (Volts)V F = 0,Thermal Time ConstantNumber @ I F = 20 mA @ I R = 100 µA f = 1 MHz Resistance e -t/τs HLMA-Typ. Max.Min.Typ.Typ.R θJ-PIN (°C/W)Typ.KL00 1.9 2.452540290 13KH00 1.9 2.45254029013Electrical Characteristics at T A = 25°CTS-AlInGaP T-13/4Speed of Forward ReverseCapacitanceResponse Voltage Breakdown C (pF)τs (ns)Part V F (Volts)V R (Volts)V F = 0,Thermal Time ConstantNumber @ I F = 20 mA @ I R = 100 µA f = 1 MHz Resistance e -t/τs HLMT-Typ. Max.Min.Typ.Typ.R θJ-PIN (°C/W)Typ.CL00 2.0 2.452570210 13CH00 2.0 2.45257021013DL00 2.0 2.45257026013DH00 2.0 2.45257026013AS-AlInGaP T-13/4Speed of Forward ReverseCapacitanceResponse Voltage Breakdown C (pF)τs (ns)Part V F (Volts)V R (Volts)V F = 0,Thermal Time ConstantNumber @ I F = 20 mA @ I R = 100 µA f = 1 MHz Resistance e -t/τs HLMA-Typ. Max.Min.Typ.Typ.R θJ-PIN (°C/W)Typ.CL00 1.9 2.452540210 13CH00 1.9 2.45254021013DL00 1.9 2.45254026013DH00 1.9 2.452540260 13DG00 1.9 2.452540260131-42Figure 2b. Forward Current vs.Forward Voltage, TS-AlInGaP.Figure 3. Relative Luminous Intensity vs. Forward Current. Derating Based on T J MAX.Figure 4a. Maximum DC Current vs.Ambient Temperature for AS T-13/4Lamps. Derating Based on T J MAX =130°C.T A – AMBIENT TEMPERATURE – °C0I F – F O R W A R D C U R R E N T – m A10203040502040608010012014060T A – AMBIENT TEMPERATURE – °C0I F – F O R W A R D C U R R E N T – m A10203040502040608010012014060Figure 1. Relative Intensity vs. Wavelength.WAVELENGTHR E L A T I V E I N T E N S I T Y1.00.50Figure 2a. Forward Current vs.Forward Voltage, AS-AlInGaP.I F – F O R W A R D C U R R E N T – m A1.00V F – FORWARD VOLTAGE – V2.520012080 1.52.0160 3.0402060100140180I F – F O R W A R D C U R R E N T – m A1.5V F – FORWARD VOLTAGE – V3.01006040 2.02.580 3.520103050709020T A – AMBIENT TEMPERATURE – °C 51535050304510050I F – F O R W A R D C UR R E N T – m A10204090602530407080100504020100I A V G – A V E R A G E C U R R E N T – m AI PEAK – PEAK FORWARD CURRENT – mA30Figure 4c. Maximum Forward Current vs. Ambient Temperature for T-1Lamps. Derating Based on T J Max = 110 °C.Figure 5. Maximum Average Current vs. Peak Forward Current.Figure 4b. Maximum DC Current vs.Ambient Temperature for TS T-13/4Lamps. Derating Based on T J MAX =130°C. 2.52.01.51.00.001050204030I F – DC FORWARD CURRENT – mAR E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D A T 20 m A )0.51-43N O R M A L I Z E D I N T E N S I T Y1.00.90.80.70.60.50.40.30.20.120°16°12°8°4°0°4°8°12°16°20°θ – ANGULAR DISPLACEMENT – DEGREES18°14°10°6°2°2°6°10°14°18°Figure 6. Normalized Luminous Intensity vs. Angular Displacement,HLMT-CH00/CL00.θ – ANGULAR DISPLACEMENT – DEGREESN O R M A L I Z E D I N T E N S I T Y1.00.90.80.70.60.50.40.30.20.1100°90°80°70°60°50°40°30°20°10°0°10°20°30°40°50°60°70°80°90°100°Figure 8. Normalized Luminous Intensity vs. Angular Displacement, HLMA-KH00/-KL00.Figure 7. Normalized Luminous Intensity vs. Angular Displacement,HLMA-DG00/-DH00/-DL00.N O R M A L I Z E D I N T E N S I T Y1000θ – ANGULAR DISPLACEMENT – DEGREES80605070202018103040161412108426246810121416182090。

HLMP-C517-X0000中文资料

HLMP-C517-X0000中文资料

DescriptionThese non-diffused lamps are designed to produce a bright light source and smooth radiationpattern. A slight tint is added to the lens for easy color identification.This lamp has been designed with aHLMP-C115, HLMP-C117, HLMP-C123, HLMP-C215, HLMP-C223,HLMP-C315, HLMP-C323, HLMP-C415, HLMP-C423, HLMP-C515,HLMP-C523, HLMP-C615, HLMP-C623Features•Very high intensity •Exceptional uniformity •Microtint lens for color identification•Consistent viewability All colors: AlGaAs RedHigh Efficiency Red Yellow Orange GreenEmerald Green •15° and 25° family•Tape and reel options available •Binned for color and intensity Applications•Ideal for backlighting front panels*•Used for lighting switches •Adapted for indoor and outdoor signsAgilentT-13/4 Super Ultra-Bright LED LampsData Sheet20mil lead frame, enhanced flange, and tight meniscus controls, making it compatible with radial lead automated insertion equipment.Selection GuidePart Number Luminous Intensity Iv (mcd) Color2θ1/2[1]Standoff Leads HLMP-Min.Max.DH AS AlGaAs15No C115290.0–C115-O00xx290.0–C115-OP0xx290.01000.0Yes C117-OP0xx290.01000.025No C12390.2–C123-L00xx90.2–Red15No C215138.0–C215-M00xx138.0–C215-MN0xx138.0400.025No C22390.2–C223-L00xx90.2–C223-MN0xx138.0400.0 Yellow15No C315147.0–C315-L00xx147.0–C315-LM0xx147.0424.025No C32396.2–C323-K00xx96.2–C323-KL0xx96.2294.0 Orange15No C415138.0–C415-M00xx138.0–C415-M0D0xx138.0–C415-MN0xx138.0400.025No C42390.2–C423-L00xx90.2–C423-LM0xx90.2276.0 Green15No C515170.0–C515-L00xx170.0C515-LM0xx170.0490.025No C52369.8–C523-J00xx69.8–C523-KL0xx111.7340.0 Emerald Green15No C61517.0–C615-G00xx17.0–25No C623 6.7–C623-E00xx 6.7–Part Numbering SystemHLMP - C x xx - x x x xxMechanical Options00: Bulk01: Tape & Reel, Crimped Leads02: Tape & Reel, Straight LeadsB2: Right Angle Housing, Even LeadsUQ: Ammo Pack, Horizontal LeadsColor Bin Options0: Full Color Bin DistributionD: Color Bins 4 & 5 onlyMaximum Iv Bin Options0: Open (No Maximum Limit)Others: Please refer to the Iv Bin TableMinimum Iv Bin OptionsPlease refer to the Iv Bin TableViewing Angle & Standoffs Options15: 15 Degree, without Standoffs17: 15 Degree, with Standoffs23: 25 Degree, without StandoffsColor Options1. AS AlGaAs Red2. High Efficiency Red3. Yellow4. Orange5. Green6. Emerald GreenPackage OptionsC: T-1 3/4 (5 mm)Absolute Maximum Ratings at T A = 25°CHighHighDH AS Efficiency Performance AlGaAs Red and Green and ParameterRed Orange Yellow Emerald Green Units DC Forward Current [1]30302030mA Transient Forward Current [2]500500500500mA (10 µsec Pulse)Reverse Voltage (Ir = 100 µA)5555V LED Junction Temperature 110110110110°C Operating Temperature Range –20 to +100–55 to +100–20 to +100°C Storage Temperature Range –55 to +100°CWave Soldering Temperature 250°C for 3 seconds [1.59 mm (0.063 in.) from body]Lead Solder Dipping Temperature 260°C for 5 seconds[1.59 mm (0.063 in.) from body]Notes:1. See Figure 5 for maximum current derating vs. ambient temperature.2. The transient current is the maximum nonrecurring peak current the device can withstand without damaging the LED die and wire bond.Package DimensionsHLMP-Cx15 and HLMP-Cx23HLMP-Cx17(0.039)NOTES:1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).2. LEADS ARE MILD STEEL, SOLDER DIPPED.3. AN EPOXY MENISCUS MAY EXTEND ABOUT 0.5 mm (0.020 in.) DOWN THE LEADS.± 0.20± 0.008)Electrical Characteristics at T A = 25°CForward Reverse Capacitance Speed of ResponseVoltage Breakdown C (pF)Thermalτs (ns)Vf (Volts)Vr (Volts)Vf = 0Resistance Time Constant@ If = 20 mA@ Ir = 100 µA f = 1 MHz RθJ-PIN e-t/τsPart Number Typ.Max.Min.Typ.(°C/W)Typ.HLMP-C115 1.8 2.253021030HLMP-C117HLMP-C123HLMP-C215 1.9 2.651121090HLMP-C223HLMP-C315 2.1 2.651521090HLMP-C323HLMP-C415 1.9 2.654210280HLMP-C423HLMP-C515 2.2 3.0518210260HLMP-C523HLMP-C615 2.2 3.0518210260HLMP-C623Optical Characteristics at T A = 25°CLuminous Color,ViewingIntensity Peak Dominant Angle LuminousIv (mcd)Wavelength Wavelength2θ1/2Efficacy@ 20 mA[1]λpeak (nm)λd[2] (nm)(Degrees)[3]ηvPart Number Min.Typ.Typ.Typ.Typ.(lm/w) HLMP-C1152906006456371180HLMP-C117HLMP-C1239020026HLMP-C215138300635626171459017023HLMP-C315146300583585175009617025HLMP-C415138300600602173809017023HLMP-C515170300568570205956917028HLMP-C61517455585602065662728Notes:1. The luminous intensity, Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not bealigned with this axis.2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device.3. 2θ1/2 is the off-axis angle where the luminous intensity is 1/2 the on-axis intensity.Figure 1. Relative intensity vs. wavelength.Figure 2. Forward current vs. forward voltage (non-resistor lamp).Figure 3. Relative luminous intensity vs. forward current.WAVELENGTH – nmR E L A T I V E I N T E N S I T Y1.00.50I F – F O R W A R DC U R R E N T – m AV F – FORWARD VOLTAGE – VI F – F O R W A R D C U R R E N T – m AV F – FORWARD VOLTAGE – VHIGH EFFICIENCY RED, ORANGE,YELLOW, AND HIGH PERFORMANCEGREEN, EMERALD GREENR E L A T I V E L U M I N O U S I N TE N S I T Y (N O R M A L I Z E D A T 20 m A )I F – DC FORWARD CURRENT – mA R E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D A T 20 m A )0I DC – DC CURRENT PER LED – mA10201.60.80.4515301.2250.20.61.01.4HER, ORANGE, YELLOW, AND HIGH PERFORMANCE GREEN, EMERALD GREENFigure 5. Maximum forward dc current vs. ambient temperature. Derating based on T j MAX = 110°C.Figure 4. Relative efficiency (luminous intensity per unit current) vs. peak current.Figure 6. Relative luminous intensity vs. angular displacement. 15 degree family.R E L A T I V E E F F I C I E N C Y (N O R M A L I Z E D A T 20 m A )0I PEAK – PEAK FORWARD CURRENT – mA0.60.8300201001.21.00.20.45020010DH As AlGaAs REDηP E A K – R E L A T I V E E F F I C I E N C Y (N O R M A L I Z E D A T 20 m A )I PEAK – PEAK FORWARD CURRENT – mAHER, ORANGE, YELLOW, HIGHPERFORMANCE GREEN, EMERALD GREENI F – F O R W A R D C U R R E NT – m AT A – AMBIENT TEMPERATURE – °C DH As AlGaAs REDI F – F O R W A R D C U R R E N T – m AT A – AMBIENT TEMPERATURE – °CHER, ORANGE, YELLOW, AND HIGH PERFORMANCE GREEN, EMERALD GREEN N O R M A L I Z E D L U M I N O U S I N T E N S I T Y10ANGULAR DISPLACEMENT – DEGREES0.80.60.50.70.2450.10.30.4403530252010515-5-10-15-20-25-30-35-40-450.9Figure 7. Relative luminous intensity vs. angular displacement. 25 degree family.Intensity Bin Limits Intensity Range (mcd)ColorBin Min.Max.L 101.5162.4M 162.4234.6N 234.6340.0O 340.0540.0P 540.0850.0Q 850.01200.0R 1200.01700.0Red/OrangeS 1700.02400.0T 2400.03400.0U 3400.04900.0V 4900.07100.0W 7100.010200.0X 10200.014800.0Y 14800.021400.0Z 21400.030900.0L 173.2250.0M 250.0360.0N 360.0510.0O 510.0800.0P 800.01250.0YellowQ 1250.01800.0R 1800.02900.0S 2900.04700.0T 4700.07200.0U 7200.011700.0V 11700.018000.0W18000.027000.0N O R M A L I Z E D L U M I N O U S I N T E N S I T Y10ANGULAR DISPLACEMENT – DEGREES0.80.60.50.70.2450.10.30.4403530252010515-5-10-15-20-25-30-35-40-450.9Intensity Bin Limits, continuedIntensity Range (mcd) Color Bin Min.Max.E7.612.0F12.019.1G19.130.7H30.749.1I49.178.5J78.5125.7K125.7201.1L201.1289.0 Green/M289.0417.0 Emerald Green N417.0680.0O680.01100.0P1100.01800.0Q1800.02700.0R2700.04300.0S4300.06800.0T6800.010800.0U10800.016000.0V16000.025000.0W25000.040000.0 Maximum tolerance for each bin limit is ± 18%.Color CategoriesLambda (nm)Color Category #Min.Max.6561.5564.55564.5567.5 Green4567.5570.53570.5573.52573.5576.51582.0584.53584.5587.0 Yellow2587.0589.54589.5592.05592.0593.01597.0599.52599.5602.03602.0604.5 Orange4604.5607.55607.5610.56610.5613.57613.5616.58616.5619.5 Tolerance for each bin limit is ± 0.5 nm.Mechanical Option MatrixMechanical Option Code Definition00Bulk Packaging, minimum increment 500 pcs/bag01Tape & Reel, crimped leads, minimum increment 1300 pcs/bag02Tape & Reel, straight leads, minimum increment 1300 pcs/bagB2Right Angle Housing, even leads, minimum increment 500 pcs/bagUQ Ammo Pack, horizontal leads, in 1K minimum incrementNote:All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent representative for further clarification/information./semiconductorsFor product information and a complete list ofdistributors, please go to our web site.For technical assistance call:Americas/Canada: +1 (800) 235-0312 or(916) 788-6763Europe: +49 (0) 6441 92460China: 10800 650 0017Hong Kong: (+65) 6756 2394India, Australia, New Zealand: (+65) 6755 1939Japan: (+81 3) 3335-8152 (Domestic/Interna-tional), or 0120-61-1280 (Domestic Only)Korea: (+65) 6755 1989Singapore, Malaysia, Vietnam, Thailand,Philippines, Indonesia: (+65) 6755 2044Taiwan: (+65) 6755 1843Data subject to change.Copyright © 2004 Agilent Technologies, Inc.Obsoletes 5965-6165ENovember 11, 20045988-2149EN。

Compabloc 紧凑型热交换器系列说明说明书

Compabloc 紧凑型热交换器系列说明说明书

focus on efficient mechanical cleaning,the L series to meet the particular requirements associated with high-pressure applications,and the X pattern combining high pressure and mechani-cal cleanability.All patterns have been optimized with regards to structural strength and flow mechanics,making the Compabloc more resistant to pressure peaks and cycling.This boosts the reliability and safety of the unit as well as providing better heat transfer performance.Flow pathsThe two media flow in alternately weld-ed channels between the corrugated plates.They flow in a cross-flowPanelHeat transfer plate packGasketSupportUpper headBaffle GirderLower headThe heart of the matterThe heart of Compabloc is a stack of corrugated heat-transfer plates in stainless steel or exotic materials,welded alternately to form pabloc is available in seven differ-ent plate family models:CP15,CP20,CP30,CP40,CP50,CP75and CP120with heat transfer areas ranging from 0.7to 840m 2(7to 8985ft 2)per unit.Each model is modularized with a stan-dard number of plates to fit any duty.Welds that meet your challenges Compabloc models CP15and CP20are TIG welded whereas the larger models CP30to CP120are laserwelded.The advantage of laser welding is that the weld is thinner and more accurate,and the heat input issubstantially reduced.This results in a unit with less stress,which makes it less sensitive to fatigue and cycling.In other words,laser welding improves reliability,extends the working life,and enables Compabloc installation in harsh environments.Another advantage is the shorter and more flexible delivery time.In addition to the advantage of using high tech laser welding the plates are configured in such a way that the joint between the plates allows butt welding thus eliminating the crevices that are a feature of other welded plate exchangers using manual TIG welding,and that are highly susceptible to crevice corrosion.Plate patternThe laser-welded range of Compablocs is available with three plate patterns –the K series,designed with a specialThe two media flow in cross-flow in alternately welded channelsSectional view of CompablocCompablocThe Compabloc welded plate heat exchanger from Alfa Laval is just reaching peak performance when many other conventional heat exchangers start to run out of steam.With no gaskets between the plates,Compabloc is perfect for operation in chemically aggressive environments and for handling high-tempera-ture fluids.2Compablocarrangement within each pass (see fig-ure at right)while the overall flow arrangement is counter-current for a multi-pass unit (see sectional viewbelow).When required,the unit can be designed with overall co-current opera-tion.Each pass is separated from theSuspended mounting forcondensation dutiesVertical Compabloc for liquid/liquid heat recoveryCompabloc installed as stripping column reboiler at an ethyl-acetate plant in Rhodia,Brazil 4CompablocApplicationsOil&gas production•Heat recovery in TEG systems(gas dehydration)•Heat recovery,cooling,condensation &reboiling in amine systems(gas sweetening,sour service)•Heat recovery,heating and cooling in crude oil dehydration and desalina-tion systems•Condensation in vapour recovery units •Heat recovery,cooling,condensation and reboiling in NGL fractionation systemsRefineriesVarious condensing&reboiling duties such as:•Condensation in atmospheric and vacuum distillation•Top condensing on fractionators in FCC,hydrocracking,H2S strippers,etc.•Propane&butane overheads con-densing in NGL and alkylation plants •Reboiling in H2S strippers,sour water strippers and other columns •Steam generationHeat recovery,cooling&heating duties such as:•Cooling of gasoline,kerosene,gas oil, diesel,pump-around etc•Cooling&heating of bitumen,VGO (vacuum gas oil)and other heavy products•Fractionator feed/bottom heat recovery•Pre-heating of crude oil•Desalted water/feed water heat recovery Hydrocarbon process industryCondensation,heating/cooling,heatrecovery and reboiling duties in the pro-duction of:•primaries such as olefins,aromatics,aldehydes,acids,ethers,esters,ketones,and halogens•intermediates such as acrolein,acrylic acid and acrylates,acryloni-trile,adipic acid,alkylbenzenes,ani-line/nitrobenzene,benzenesulphonicacid,bispenol A,caprolactam,diiso-cyanates(MDI&TDI),ethylben-zene/styrene,ethylene oxide/glycol,hexamethylenediamine(HMDA),maleic anhydride,melamine,phenol,phosgene,phthalic anhydride,propy-lene oxide/glycol,terephthalic acid(PTA)/dimethyl terephthalate(DMT),vinyl acetate,vinyl chloride,EDC•polymers including polyethylene,polypropylene,polystyrene andstyrene co-polymers,formaldehyderesins,polycarbonates,polyols,polyvinyl acetate,and polyvinyl alcohol•other organic chemicals such assoaps and detergents,paintings andcoatingsPharmaceutical industry&specialtychemicals•Special2-pass condenser with built-ingas/liquid separation chamber andmist eliminator for reactor overheadand vent condensation•Primary and vent condensation withhygienic design•Solvent recovery•Special2-pass condenser with2cooling medias.Coke oven plants•Ammonia liquor scrubber cooling•Debenzolized oil cooling•Benzolized oil heatingChlorine alkali plants•Chlorine gas cooling(drying)•Hydrogen gas cooling(drying)Fertilizer production•Nitrogen gas cooling•CO2gas cooling(3-step compressorinterstage cooler-gas drying)•Ammonia heat recovery and strippingcolumn reboiler•Nitric acid coolingHydrogene peroxide plants•Heat recovery and cooling of processstreamsAmmonium nitrate•Spent sulphuric acid heat recovery.•Oleum coolingMining industry•Nickel refining solvent extractionVegetable oil&fatty acids•Feed/bottom in deodorizationHVAC,district heating,energy,utilities,general services•Hot water production system•Steam heating•Heat recoveryFrom oil&gas to district heatingThe numerous advantages of the Compabloc heat exchanger make it suitable for use in a wide range of industries and applications.6CompablocCompact facts about Compabloc Design temperature:up to 350°C (660°F),down to -100°C (-148°F).Design pressure:up to 42barg (600psig)depending on models and full vacuum (FV).Maximum heat transfer area:840m 2(8985ft 2).Maximum liquid flow rate per unit:6000m 3/h (26250USgpm).Lowest achievable temperature difference:3°C (5.4°F).Duty:heat recovery (feed/bottom on stripping/distillation column),cooling,heating,condensation,partial condensation,reboiling,evaporation and gas cooling.Performance:low to high thermal length or NTU duty.Handles any corrosive medium.In case of service…The flexible construction of theCompabloc makes service a straight-forward matter.Cleaning can be done using 2different methods.Cleaning by hydroblasting is carried out on site by removing the panels and blasting the inside of the plate pack with a water jet at pressures of up to 1000barg.On-site cleaning can also be done by circulating cleaning solutions through the plate pack.Such chemical cleaning is highly effective as a result of the unit’s high turbulence and low hold-up volume.Chemical cleaning can also be per-formed by removing the plate pack and immersing it in a chemical bath.Compact facts about Compabloc Design temperature:up to 350°C (660°F),down to -100°C (-148°F).Design pressure:up to 42barg (600psig)depending on models and full vacuum (FV).Maximum heat transfer area:840m 2(8985ft 2).Maximum liquid flow rate per unit:6000m 3/h (26250USgpm).Lowest achievable temperature difference:3°C (5.4°F).Duty:heat recovery (feed/bottom on stripping/distillation column),cooling,heating,condensation,partial condensation,reboiling,evaporation and gas cooling.Performance:low to high thermal length or NTU duty.Handles any corrosive medium.On-site chemical cleaning is performed using the Alfa Laval CIP unit by circulating cleaning solutions through Compabloc.The solution is circulated from the lower inlet connection,through Compabloc and then discharged from the upper connection to the CIP tank.Compabloc 7。

AXP223中文

AXP223中文


版本历史
版本 1.0 1.1
日期 2013.08.30 2013.11.28
描述 第一版 修改部分参数，补充寄存器说明
版权声明
版权所有，违法必究。
非经本公司书面同意，任何单位或个人不得擅自摘抄、复制本文档内容的部分或全部，并不得以任何形式进行传播。任何单位或个人不得 删除、修改或移除本文档版权及所有的权利声明。
功能框图 ............................................................................................................................................................................................................ 12
9.5.
E-Gauge ™ 电量计系统 ............................................................................................................................................................. 27
10.2. 寄存器描述 ......................................................................................................................................................................................32