HS官方中英对照翻译
- 格式:doc
- 大小:48.50 KB
- 文档页数:4
HS官方HELP文档中英对照翻译
1、[ALT]+[R] toreset your camera重置摄像机
2、AdjustEnvironment Brightness: [UP ARROW] (increase) and [DOWN ARROW] (decrease) [LEFTARROW](slight decrease) and [RIGHT ARROW] (slightincrease). Adjusts the HDRIbrightness (lightingintensity) on the model without affecting the HDRI imageappearance in your HyperShot scene. This does
not affect the backplate image.
通过上下左右箭头对环境的亮度控制
3、Toggle SelfShadowing on/off: [S]. Toggles object self-shadowing (objects casting shadows on themselves and other objects) on andoff.
自身阴影实时开关,可以快速放置模型到最好位置
4、Toggle Ground:[G]. Toggles the ground plane on and off.
G键平面化地板开关
5、RotateEnvironment Image: [CTRL]+left-click+drag. Rotates the HDRI image horizontallyabout the scene’s center (y-axis). This allows you to reposition the lightsource and the reflections onto the object in
realtime. The shadowswill update upon release of the mouse button.
旋转环境贴图
6、ResetEnvironment Image Position: [CTRL]+[R]. Resets the HDRI image to its defaultposition. [CTRL]+[R]重置环境贴图
7、模型的操作
• Unhide (sh ow) allmodel parts: [CTRL+[U]. Displays all hidden 3D objects.
取消所有隐藏
• Moving objects on the ground plane (xz): [SHIFT] + [ALT] + LeftMouse Button Click + Drag to move the object on the ground plane or a planeparallel to the ground plane when the object is not sitting on the
ground.
SHIFT+ALT+左键
平行于地面的移动
• Move objects up ordown (y): [SHIFT] + [ALT] + [Command]+ Left Mouse Button Click + Drag to movethe object up or down in the scene.
SHIFT+ALT+CTRL+左键
上下移动
• Rotate objectsaround y-axis (vertical up direction): [SHIFT] + [ALT] + Middle Mouse ButtonClick + Drag to quickly rotate the object around the vertical axis in the scene(y-axis).
SHIFT+ALT+中键
平行于地面的旋转
• Rotate objects freely: [SHIFT] + [ALT] + [Command] + Middle MouseButton Click + Drag to rotate objects freely in the scene.
SHIFT+ALT+CTRL+中键
任意的旋转
• Scale objects:[SHIFT] + [ALT] + Right Mouse Button Click to scale the object.
SHIFT+ALT+右键
缩放模型
8、摄像机的操作
• Tumble camera: [ALT] - left-click+drag. Rotates the current camera about the center of the Hyper Shot scene or around the camera’s defined rotation (look at) point.
左键旋转摄像机
• Pan camera: [ALT] - middle-click+drag (or [ALT]+right-click+drag). Translates (moves without rotating) your
Camera in the current viewing plane while staying focused on the cur rent “look at” point.中间手掌移动摄像机
• Dolly camera: [ALT] - right-click+drag. Moves the camera to and from the object and the current “look at”
point.
ALT+右键前后推移摄像机有时不行就用ALT+中键滚动
• Camera focal length (Zoom): [ALT]+scroll mouse wheel. Changes the camera’s focal length. To see the
effect, dolly the camera in or out after adjusting the focal length. The current value is captured in the
camera tab, or can be seen by displaying the heads-up display [H].
ALT+中键滚动
• Tilt camera: [CTRL]+[ALT]+scroll mouse wheel. R otates the camera about its own Z-axis (the equivalent of spinning a camera around while keeping it in the same location with its lens pointed in the same direction). The value is captured in the camera tab, and can be changed by typing in any number (degrees).
CTRL+ALT+中间滚动旋转画面
• Reset camera: [ALT]+[R]. Resets the current camera to its default position, orientation, and focal
length. If you are resetting a custom camera, then the camera will revert to the settings it had when
you created the camera.
ALT+R 重置摄像机
• Save camera: [ALT]+[C]. Saves a new custom camera to your HyperShot scene with the current position.
[ALT]+[C] 保存摄像机
• Cycle through all cameras: [ALT]+[N]. Cycles through all of the cameras sav ed in your HyperShot scene.
从保存的摄像机中切换,默认的有前后左右等几个
• Pick camera pivot point: [ALT]+[CTRL]+right-click. Select the point around which the camera will
rotate (tumble).
选择中心视点
12、环境菜单
• Background Color:Clicking the Background Color button opens a standard color picker, which