BD136/138/140BD136/138/140BD136/138/140TRADEMARKSThe following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.ACEx™Bottomless™CoolFET™CROSSVOLT™E2CMOS™FACT™FACT Quiet Series™FAST®FASTr™GTO™HiSeC™ISOPLANAR™MICROWIRE™POP™PowerTrench®QFET™QS™Quiet Series™SuperSOT™-3SuperSOT™-6SuperSOT™-8SyncFET™TinyLogic™UHC™VCX™DISCLAIMERFAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.LIFE SUPPORT POLICYFAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR INTERNATIONAL.As used herein:1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.PRODUCT STATUS DEFINITIONSDefinition of TermsDatasheet Identification Product Status DefinitionAdvance Information Formative or InDesign This datasheet contains the design specifications for product development. Specifications may change in any manner without notice.Preliminary First Production This datasheet contains preliminary data, andsupplementary data will be published at a later date.Fairchild Semiconductor reserves the right to makechanges at any time without notice in order to improvedesign.No Identification Needed Full Production This datasheet contains final specifications. FairchildSemiconductor reserves the right to make changes atany time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a productthat has been discontinued by Fairchild semiconductor.The datasheet is printed for reference information only.分销商库存信息:FAIRCHILDBD14016S BD13610S BD13616STU BD13616S BD13610STU BD13810STU BD13816S BD14010S BD13810S BD1366S BD1366STU BD1386SBD1386STU BD1406S BD1406STU。
FB136交直流通用开关量输入端子板1功能说明FB136交直流通用开关量输入端子板，通过40芯排线与模块FM161配合使用的电缆连接式底座FM131-C相连。
完成16路输入为220V内直流或交流电压的开关量输出转换，并与控制柜里的16路开入模块FM161接口并隔离。
输入交流采用电容分压，直流通过电阻限流；整流电路可以兼容交流和直流，并防止正负端子接错；控制LED的光藕接于输出侧，可以使LED直接反映输出，且在参数上易于调节LED发光的区间。
2端子说明2.1输入信号端子说明图2-1板面布置图如图2-1所示，印制板的外形尺寸为120*210mm，4个定位孔的直径为5 mm，各个定位孔中心到印制板相邻两边的距离均为8mm。
现场信号分三类：有源单线、无源单线、无源两线；其接线如图2-2所示。
图2-2输入端子接线图说明：CH1~CH16：1、2；3、4；…；31、32分别为1到16路信号的输入端子。
所有的偶数端子在印制板内通过跳线J1、…J16短接。
2.2与底座接线说明FB136交直流通用开关量输入端子板，通过40芯扁平电缆与封装模块FM161的电缆连接式底座FM131-C相连。
FB136的牛角连接器的插针排列顺序如图2-3所示，与FM131-C底座上的牛角连接器的插针排列顺序一致。
所以压制40芯排线时排线的两个压头的方向一致，两个压头的40根压线的顺序一一对应。
FB136交直流通用开关量输入端子板图2-3牛角连接器40针排列顺序图40针牛角连接器的信号定义如表2-1所示：3技术指标FB137交直流通用开关量输出端子板1功能说明FB137交直流通用开关量输出端子板，通过40芯排线与模块FM171配合使用的电缆连接式底座FM131-C相连。
完成16路输入为220V内直流或交流电压的开关量通断控制，并与控制柜里的16路开入模块FM171接口并隔离。
2端子说明2.1信号端子说明图2-1板面布置图如图2-1所示，印制板的外形尺寸为120*210mm，4个定位孔MT1~MT4的直径为5 mm，各个定位孔中心到印制板相邻两边的距离均为8mm。
1.Product profile1.1General descriptionPlanar passivated very sensitive gate four quadrant triac in a SOT78 plastic package intended for use in general purpose bidirectional switching and phase control applications, where high sensitivity is required in all four quadrants. This very sensitive gate "series D" triac is intended to be interfaced directly to microcontrollers, logic integrated circuits and other low power gate trigger circuits.1.2Features and benefitsDirect triggering from low power drivers and logic ICs High blocking voltage capability Low holding current for low current loads and lowest EMI at commutationPlanar passivated for voltage ruggedness and reliability Triggering in all four quadrants Very sensitive gate1.3ApplicationsGeneral purpose motor controlGeneral purpose switching1.4Quick reference dataBT137-600D4Q TriacRev. 3 — 24 March 2011Product data sheetTable 1.Quick reference data Symbol Parameter ConditionsMin Typ Max Unit V DRM repetitive peak off-state voltage --600V I TSMnon-repetitive peak on-state current full sine wave; T j(init)=25°C; t p =20ms; see Figure 4;see Figure 5--65AI T(RMS)RMS on-state currentfull sine wave; T mb ≤102°C; see Figure 1; see Figure 2;see Figure 3--8A2.Pinning information3.Ordering informationStatic characteristicsI GTgate trigger currentV D =12V;I T =0.1A; T2+ G+; T j =25°C; see Figure 7- 2.55mA V D =12V;I T =0.1A; T2+ G-; T j =25°C; see Figure 7- 3.55mA V D =12V;I T =0.1A; T2- G-; T j =25°C; see Figure 7- 3.55mA V D =12V;I T =0.1A; T2- G+; T j =25°C; see Figure 7- 6.510mA I Hholding currentV D =12V;T j =25°C;see Figure 9- 1.510mATable 1.Quick reference data …continued Symbol Parameter ConditionsMin Typ Max Unit Table 2.Pinning information Pin Symbol Description Simplified outline Graphic symbol1T1main terminal 1SOT78 (TO-220AB)2T2main terminal 23G gatembT2mounting base;main terminal 212mb3sym051T1GT2Table 3.Ordering informationType numberPackage NameDescriptionVersion BT137-600DTO-220ABplastic single-ended package; heatsink mounted; 1 mounting hole; 3-lead TO-220ABSOT784.Limiting valuesTable 4.Limiting valuesIn accordance with the Absolute Maximum Rating System (IEC 60134).Symbol ParameterConditionsMin Max Unit V DRM repetitive peak off-state voltage -600V I T(RMS)RMS on-state current full sine wave; T mb ≤102°C;see Figure 1; see Figure 2; see Figure 3-8A I TSMnon-repetitive peak on-state currentfull sine wave; T j(init)=25°C;t p =20ms; see Figure 4; see Figure 5-65A full sine wave; T j(init)=25°C; t p =16.7ms-71A I 2t I 2t for fusing t p =10ms; sine-wave pulse-21A 2s dI T /dtrate of rise of on-state currentI T =12A; I G =0.2A; dI G /dt =0.2A/µs; T2+ G+-50A/µs I T =12A; I G =0.2A; dI G /dt =0.2A/µs; T2+ G--50A/µs I T =12A; I G =0.2A; dI G /dt =0.2A/µs; T2- G--50A/µs I T =12A; I G =0.2A; dI G /dt =0.2A/µs; T2- G+-10A/µs I GM peak gate current -2A V GM peak gate voltage -5V P GM peak gate power -5W P G(AV)average gate power over any 20 ms period-0.5W T stg storage temperature -40150°C T jjunction temperature-125°C5.Thermal characteristicsTable 5.Thermal characteristicsSymbol ParameterConditionsMin Typ Max Unit R th(j-mb)thermal resistance from junction to mounting base half cycle; see Figure 6-- 2.4K/W full cycle; see Figure 6--2K/W R th(j-a)thermal resistance from junction to ambientin free air-60-K/W6.CharacteristicsTable 6.CharacteristicsSymbol Parameter Conditions Min Typ Max Unit Static characteristicsI GT gate trigger current V D=12V;I T=0.1A; T2+ G+;T j=25°C;see Figure 7- 2.55mAV D=12V;I T=0.1A; T2+ G-;T j=25°C;see Figure 7- 3.55mAV D=12V;I T=0.1A; T2- G-;T j=25°C;see Figure 7- 3.55mAV D=12V;I T=0.1A; T2- G+;T j=25°C;see Figure 7- 6.510mAI L latching current V D=12V;I G=0.1A; T2+ G+;T j=25°C;see Figure 8- 1.615mAV D=12V;I G=0.1A; T2+ G-;T j=25°C;see Figure 8-8.520mAV D=12V;I G=0.1A; T2- G-;T j=25°C;see Figure 8- 1.215mAV D=12V;I G=0.1A; T2- G+;T j=25°C;see Figure 8- 2.520mA I H holding current V D=12V;T j=25°C;see Figure 9- 1.510mA V T on-state voltage I T=10A; T j=25°C; see Figure 10- 1.3 1.65VV GT gate trigger voltage V D=12V;I T=0.1A; T j=25°C;see Figure 11-0.7 1.5VV D=400V; I T=0.1A; T j=125°C;see Figure 110.250.4-VI D off-state current V D=600V; T j=125°C-0.10.5mA Dynamic characteristicsdV D/dt rate of rise of off-statevoltage V DM=402V;T j=125°C;R GT1=1kΩ;exponential waveform; gate open circuit-5-V/µst gt gate-controlled turn-ontime I TM=12A; V D=600V; I G=0.1mA;dI G/dt=5A/µs-2-µs7.Package outlineFig 12.Package outline SOT78 (TO-220AB)8.Revision historyTable 7.Revision historyDocument ID Release date Data sheet status Change notice SupersedesBT137-600D v.320110324Product data sheet-BT137-600D_2 Modifications:•Various changes to content.•The format of this data sheet has been redesigned to comply with the new identity guidelines of NXP Semiconductors.•Legal texts have been adapted to the new company name where appropriate.BT137-600D_220010601Product specification-BT137_SERIES_D_1分销商库存信息: NXPBT137-600D,127。
