奥伟斯科技为您提供Hynitron海栎创触摸芯片应用参考设计解决方案

NOVOHALL Rotary Sensor TouchlessRFE-3200VoltageMobile ApplicationsPreliminary Data sheetSpecial Features• Touchless hall technology • Electrical range up to 360°• 2-part, mechanically decoupled• High protection class IP67, IP68, IP69K • Resolution up to 12 bit • Wear-free• Temperature range -40 °C to +125 °C • Single and dual-channel versions• Optimized for use in mobile applications with highest EMC requirements such as ISO pulses and high interferences to ISO 11452 and ECE-Standard• Suitable for safety-related applications according to DIN EN ISO 13849• Other configurations see separate data sheetsApplications• Mobile working machines (industrial trucks, construction machinery, agricultural and forestry machinery)• Marine applicationsThe two-part design consisting of sensor and magnetic position marker offers great flexibility when mounting. The absence of shaft and bearing makes the assembly much less sensitive to axial and radial application tolerances - separate couplings are obsolete.Measurements can be made transmissively through any non-ferromagnetic material.The sensor is perfectly suitable for use in harsh environmental conditions through the completely encapsulated electronics.Single and dual-channel versions are available and suitable for use in safety-related applications.Description Material Housing: high grade, temperature resistant plastic PBT GF30 with SS inserts MountingWith 2 lens head screws M4x18 (included in delivery)Fastening torque of mounting max. 200 NcmElectrical connection 6-pin MQS-connector, code A, tinned contact according to drawing AMP-114-18063-126, Index A1 (Connector: AMP P/N 1-967616-1)Mechanical Data Dimensions See dimension drawing Mechanical travel 360° continuous Weightapprox. 50 gSpecificationsAccessories included in delivery• 2x Lens head screws M4x18CAD data seewww.novotechnik.de/en/download/cad-data/When the marking of theposition marker pointstowards the connector,the sensor is near theelectrical center position.Technical DataType RFE-32_ _-_ _ _-3_ _-521VoltageOutput signal0.25 ... 4.75 V0.5 ... 4.5 VLoad≥ 10 kΩNumber of channels 1 / 2Diagnosis activated (in case of error, output signal is outside of the plausible signal range)Update rate typ. 3.4 kHzMeasuring range0 ... 30° up to 0 ... 360° in 10°-stepsIndependent linearity≤ ±0.5 %FSResolution12 bitsRepeatability typ. ≤ ±0.1°Hysteresis typ. < ±0.1°Only easuring range 360°: typ. < 0.25° (lower hysteresis on request)Temperature error Measuring range 30 ... 170°: typ. ±1.0 %FS, Measuring range ≥ 180°: typ. ±0.5 %FSSupply voltage Ub12/24 VDC (8 ... 34 VDC)Current consumption w/o load typ. 12 mA per channelOvervoltage protection60 VDC (10 min.)Polarity protection yes (supply lines and outputs)Short circuit protection yes (vs. GND and supply voltage)Insulation resistance (500 VDC)≥ 10 MΩEnvironmental DataMax. operational speed Mechanically unlimitedVibration IEC 60068-2-620 g, 5 ... 2000 Hz, Amax = 0.75 mmShock IEC 60068-2-2750 g, 6 msProtection class ISO 20653IP67 / IP68 / IP69KOperating temperature-40 ... +125°C** The max. operating temperature depends on supply voltage Ub (see temp.diagram)Life Mechanically unlimitedFunctional safety Suitable for safety-related applications according to ISO 13849 after customer validation.Further safety data ( DCavg...) and support for functional safety are available on request.MTTF (IEC 60050)447 years (per channel)MTTFd (EN ISO 13849-1 parts count894 years (per channel)method, w/o load)MTTFd-certificate https://www.novotechnik.de/en/downloads/certificates/mttfd-certificates/Traceability Serial number on type labeling: production batch of the sensor assembly and relevant sensor componentsEMC CompatibilityISO 10605 ESD (Handling/Component)8 kV / 15 kVISO 11452-2 Radiated HF-fields100 V/mISO 11452-5 Radiated HF-Fields, stripline200 V/mCISPR 25 Radiated emission Level 5ISO 7637-2 Transient Emissions Level 3ISO 7637-2 Pulses on supply lines(1, 2a, 2b, 3a, 3b, 4, 5) Level 4ISO 7637-3 Pulses on output lines Level 4EN 13309 Construction machineryEmission/Immunity E1acc. to ECE-R10ISO 13766-1/-2 Construction machinery On requestTechnical DataOutputCharacteristics Temperature DiagramOutput characteristic Output characteristicOutput characteristic Output characteristicOutput characteristic Output characteristicZ-RFC-P23Position marker for fixation with threaded pin M4 (included in delivery)Caution: For orientation of the output characteristic please follow the user manual of the position marker!Material PA6-GF± 3 mmMax. permittedradial offsetP/N Pack. unit [pcs] 400056074140005608525Z-RFC-P43Position marker for fixation with threaded pin M4 (included in delivery)Caution: For orientation of the output characteristic please follow the user manual of the position marker!Material PA6-GF± 3 mmMax. permittedradial offsetP/N Pack. unit [pcs] 400105041140010504225Z-RFC-P30Position marker for frontal fixation with 2 cylinder screws M3x8 (included in delivery)Material PBT-GFMax. permitted± 1.5 mmradial offsetP/N Pack. unit [pcs] 400056086140005608725Z-RFC-P31Position marker for frontal fixation with 2 cylinder screws M3x8 (included in delivery)Material PBT-GF± 3 mmMax. permittedradial offsetP/N Pack. unit [pcs] 400056088140005608925Z-RFC-P22Position marker for frontal fixation with 2 cylinder head screws M4x20 (with microencapsulation, included in delivery).Attention: Closed side of position marker faces the active side of sensor.Material Aluminium, anodized± 4 mmMax. permittedradial offsetOperating temp.-40 ... +125°CP/N Pack. unit [pcs] 400106735140010673625Z-RFC-P18Screw position marker M10 x 25 mm, similar DIN 933, magnet pottedMaterial Aluminium, anodizedMax. permitted± 3 mmradial offsetP/N Pack. unit [pcs] 400104756140010475725Z-RFC-P19Screw position marker M8 x 25 mm, similar DIN 933/ISO 4017, magnet pottedMaterial Aluminium, anodized± 1.5 mmMax. permittedradial offsetP/N Pack. unit [pcs] 400104754140010475525Z-RFC-P20Screw position marker M10 x 25 mm, similar DIN 933Material Aluminium, anodizedMax. permitted± 3 mmradial offsetP/N Pack. unit [pcs] 400104758140010475925Z-RFC-P03Magnet for direct application onto customer’s shaft (see user manual).We recommend mounting on non-magnetizable materials, otherwise the specified working distances will vary (e.g. reduction of approx. 20% with axial mounting on a magnetizable shaft).± 1.5 mmMax. permittedradial offsetP/N Pack. unit [pcs] 400005658140005608150Z-RFC-P04Magnet for direct application onto customer’s shaft (see user manual).We recommend mounting on non-magnetizable materials, otherwise the specified working distances will vary (e.g. reduction of approx. 20% with axial mounting on a magnetizable shaft).± 3 mmMax. permittedradial offsetP/N Pack. unit [pcs] 400005659140005608250Working Distances Position Markers [mm] - Single-channel VersionsZ-RFC-P03Z-RFC-P04Z-RFC-P18Z-RFC-P19Z-RFC-P20Z-RFC-P22Z-RFC-P23Z-RFC-P30Z-RFC-P31Z-RFC-P43 0.4 ... 1.9 2 ... 4.70 ... 40 ... 1.8 2 ... 4.7 4.1 ... 8.9 2 ... 4.70.4 ... 1.9 2 ... 4.70 ... 2.4Working Distances Position Markers [mm] - Redundant VersionsZ-RFC-P03Z-RFC-P04Z-RFC-P18Z-RFC-P19Z-RFC-P20Z-RFC-P22Z-RFC-P23Z-RFC-P30Z-RFC-P31Z-RFC-P43 0... 1.5 1.6 ... 4.20 ... 3.50 ... 1.3 1.6 ... 4.2 3.6 ... 8.4 1.6 ... 4.20 ... 1.5 1.6 ... 4.20 (2)Lateral Magnet OffsetLateral magnet offset willcause additional linearity error.The angle error, which iscaused by radial displacementof sensor and position markerdepends on the used positionmarker or magnet.Additional Linearity Error at Radial Displacement - Single-channel VersionsZ-RFC-P02 / P04 / P08Z-RFC-P20 / P23 / P31Z-RFC-P41 / P43 / P47Z-RFC-P03 / P30Z-RFC-P18Z-RFC-P19Z-RFC-P220.5 mm: ±0.4°1.0 mm: ±1.1°2.0 mm: ±3.5°0.5 mm: ±0.4°1.0 mm: ±1.1°2.0 mm: ±3.5°0.5 mm: ±1.4°1.0 mm: ±3.7°2.0 mm: -0.5 mm: ±0.7°1.0 mm: ±1.3°2.0 mm: ±3.3°0.5 mm: ±1.3°1.0 mm: ±2.6°2.0 mm: -1.0 mm: ±0.8°2.0 mm: ±1.8°4.0 mm: ±5.4°Additional Linearity Error at Radial Displacement - Redundant VersionsZ-RFC-P02 / P04 / P08Z-RFC-P20 / P23 / P31Z-RFC-P41 / P43 / P47Z-RFC-P03 / P30Z-RFC-P18Z-RFC-P19Z-RFC-P220.5 mm: ±0.7°1.0 mm: ±1.8°2.0 mm: ±5,2°0.5 mm: ±0.7°1.0 mm: ±1.8°2.0 mm: ±5.2°0.5 mm: ±2.5°1.0 mm: ±6.4°2.0 mm: -0.5 mm: ±1.1°1.0 mm: ±2°2.0 mm: ±4.6°0.5 mm: ±2.3°1.0 mm: ±4.5°2.0 mm: -1.0 mm: ±1.1°2.0 mm: ±2.4°4.0 mm: ±6.7°Connector System MQSMQS Micro Quadlok SystemConnector kit including• 1 plug socket (female), AMP P/N 1-967616-1• 6 tinned contacts for cable cross-section area 0.3 ... 0.5 mm² (AWG 22), AMP-P/N 963727-1• 6 single conductor sealings AMP P/N 967067-2P/N Type400005666EEM-33-34Novotechnik U.S., Inc.155 Northboro RoadSouthborough, MA 01772Phone 508 485 2244Fax 508 485 2430********************© Mar 25, 2021The specifications contained in our datasheets are intended solely for informational purposes. The documented specification values are based on ideal operational and environmental conditions and can vary significantly depending on the actual customer application. Using our products at or close to one or more of the specified performance ranges can lead to limitations regarding other performance parameters. It is therefore necessary that the end user verifies relevant performance parameters in the intended application. We reserve the right to change product specifications without notice.。

上海海栎创微电子有限公司CST830数据手册高性能自电容触控芯片Rev：V2.1 2018/06/281.概述CST830自电容触控芯片，采用高速MCU内核并内嵌DSP电路，结合自身的快速自电容感应技术，可广泛支持三角形在内的多种自电容图案，在其上实现单点手势和真实两点操作，实现极高灵敏度和极低待机功耗。

2.芯片特点◆内置快速自电容检测电路及高性能DSP模块✧支持在线编程；✧内置看门狗；✧多个按键支持；✧支持待机手势唤醒功能；◆电容屏支持✧最多支持29个感应通道；✧通道悬空/下拉设计支持；✧模组参数自动调校；◆性能指标✧刷新率>100Hz；✧单点手势和真实两点操作；✧动态模式下典型功耗<5.0mA；✧监控模式下典型功耗<500uA；✧待机模式下典型功耗<500uA；✧睡眠模式下典型功耗<10uA;◆通讯接口✧I2C主/从通讯接口，速率10Khz~1Mhz可配置；✧兼容1.8V/3.3V接口电平。

◆电源供电✧单电源供电2.7V~3.6V，电源纹波<=50mv；✧除电源旁路电容外，无需其它元器件。

◆封装类型：QFN364mm*4mm*0.35mm；名称说明备注S0~S29感应通道VDDA电源 2.7V~3.6V，接2.2uF~10uF电容CMOD0/CMOD1稳压电容接1nF~10nF稳压电容IRQ中断输出上升/下降沿可选SCL/SDA I2C可选内部上拉/开漏模式备注：1.CMOD0/CMOD1必须接稳压电容，大小在1nF~10nF;4.功能描述CST830自电容触控芯片，通过其内置的快速自电容感应模块，可无需任何外接器件(电路旁路电容除外)，即可在三角形等图案上实现单点手势和真实两点功能；在实现快速反应的同时，具有极其优异的抗噪、防水、低功耗表现。

4.1工作模式动态模式当频繁有触摸操作时，处于此模式；在此模式下，触控芯片快速对触摸屏进行自电容扫描，以及时检测触摸并上报给主机。

韩国IKSEMI最新推出IL2576HV系列完全替代LM2576HV系列,IL2576HV-5.0KB-PIL2576HV-12KB-PIL2576HV-ADJKB-PIL2576HV-5.0D2T-PIL2576HV-12D2T-PIL2576HV-ADJD2T-P奥伟斯科技为您提60V降压电源IC IL2576HV-ADJD2T-P替代LM2576HVSX-ADJ应用方案LM2576HV说明LM2576系列稳压器采用单片集成为降压提供所有有效功能的电路（降压）开关稳压器，能够驱动3A负载出色的线路和负载调节。

这些设备可用固定输出电压为3.3V，5V，12V，15V和可调输出版本。

这些需要最少数量的外部组件调节器使用简单，包括内部频率补偿和固定频率振荡器。

LM2576系列提供高效的替代品流行的三端线性稳压器。

它大大减少了散热器的大小，在某些情况下没有热量需要水槽。

标准系列电感器，优化用于LM2576可从几个不同的制造商处获得。

此功能大大简化了开关模式的设计电源。

其他功能包括输出容差±4％指定输入电压和输出负载内的电压条件，振荡器频率±10％。

外部包括关断功能，具有50μA（典型值）待机电流。

输出开关包括逐周期电流限制，以及完全保护下的热关断故障情况。

产品型号:LM2576HVS-12LM2576HVS-3.3LM2576HVS-5.0LM2576HVS-ADJLM2576HVSX-12LM2576HVSX-3.3LM2576HVSX-5.0LM2576HVSX-ADJLM2576HVT-12LM2576HVT-3.3LM2576HVT-5.0LM2576HVT-ADJ60V 高压版本原装现货-奥伟斯现货供应深圳市奥伟斯科技有限公司是一家专注触摸芯片,单片机,电源管理芯片,语音芯片,场效应管,显示驱动芯片,网络接收芯片,运算放大器,红外线接收头及其它半导体产品的研发,代理销售推广的高新技术企业.奥伟斯科技自成立以来一直致力于新半导体产品在国内的推广与销售,年销售额超过壹亿人民币是一家具有综合竞争优势的专业电子元器件代理商.本公司代理推广的一系列优秀触摸芯片及语音芯片，现以大批量应用到智能电子锁、饮水机、电饭煲、LED台灯等控制器为顾客提供最佳解决方案，受到广大客户的一致赞誉。

FEATURES● Step-down Switching Regulator● Adjustable Version Output Voltage Range, 1.23V to 52V ± 4% Max over Line and Load conditions ● Guaranteed Output Current of 3A● Fixed Output Voltages : 3.3V, 5.0V, 12V and 15V ● Wide Input Voltage Range 60V ● 52 kHz Fixed Frequency Oscillator● TTL Shutdown Capability, Low Power Standby Mode ● Requires only 4 External Components ● High Efficiency● Use Readily Available Standard Inductors● Available in TO-220, TO-263 and SOP-8PP Packages ● Thermal Shutdown and Current Limit Protection ●Moisture Sensitivity Level 3TO-263 PKGAPPLICATION● Simple high-efficiency step-down (buck) regulator● Efficient pre-regulator for linear regulators● On-card switching regulators● Positive to negative converter (Buck-Boost)DESCRIPSIONORDERING INFORMATIONDevice Package LM2576HVDP-ADJSOP-8PP 8LThe LM2576HV series of regulators are monolithic integrated circuits that provide all the active functions for a step-down (buck) switching regulator, capable of driving 3A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5.0V, 12V, 15V and adjustable output versions.Requiring a minimum number of external components, these regulators are simple to use and include internal frequency compensation and a fixed-frequency oscillator. The LM2576HV series offers a high-efficiency replacement for popular three-terminal linear regulators. It substantially reduces the size of the heat sink, and in some cases no heat sink is required. A standard series of inductors optimized for use with the LM2576HV are available from several different manufacturers. This feature greatly simplifies the design of switch-mode power supplies. Other features include a guaranteed ± 4% tolerance on output voltage within specified input voltages and output load conditions, and ± 10% on the oscillator frequency. External shutdown is included, featuring 50uA (typical) standby current. The output switch includes cycle-by-cycle current limiting, as well as thermal shutdown for full protection under fault conditions.Absolute Maximum Ratings (Note 1)Feb. 2014 – R1.0 - 1 -HTCLM 2576HVOutput Voltage : ADJ / 3.3V / 5.0V /12VDP : SOP8-PPPackage Type T : TO-220-5LR : TO-263-5LRoot NameProduct CodeFeb. 2014 – R1.0- 2 -HTCPIN CONFIGURATION8. GND 5. ON/OFF 5. ON/OFF7. GND3. GND 3. GND6. GND2. VOUT 2. VOUT5. GND 1. VIN 1. VINSOP-8PP TO-263TO-220PIN DESCRIPTIONTO-263 / TO-220 5 LEAD SOP-8PP8 LEAD Pin No.Name Function Name Function 1VIN Input Supply VIN Input Supply2VOUT Output Voltage VOUT Output VoltageOutput Voltage 3GND Ground FB / ADJ Feedbackor Output AdjustOutput Voltage4FB / ADJ Feedback ON/OFF ON/OFF Shutdownor Output Adjust5/ 6/ 7/ 8ON/OFF ON/OFF Shutdown GND Ground* Exposed Pad of SOP8-PP package should be externally connected to GND.TYPICAL APPLICATION- Fixed Output Voltage VersionLM2576HV L1100uH Regulated Output Input Voltage VIN OUTPUT5VON/OFF FeedbackC IN +GND+ C OUT100uF D11000uFFeb. 2014 – R1.0- 3 -HTCELECTRICAL CHARACTERISTICSSpecifications with standard type face are for T J = 25℃ and those with boldface type apply over full operating temperature range. Unless otherwise specified, V IN =12V for the 3.3V, 5V, and Adjustable version, V IN =25V for the 12V version,and V IN =30V for the 15V version, I LOAD =500mA.HTC Feb. 2014 – R1.0- 4 -Note 1. Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is intended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics.Note 2. All limits guaranteed at room temperature (standard type face) and at temperature extremes (bold type face).Note 3. External components such as the catch diode, inductor, input and output capacitors can affect switching regulator system performance. When the 2576HV is used as shown in the Figure 2 test circuit, system performance will be as shown in system parameters section of Electrical Characteristics.Note 4. Output pin sourcing current. No diode, inductor or capacitor connected to output.Note 5. Feedback pin removed from output and connected to 0V.Note 6. Feedback pin removed from output and connected to +12V for the Adjustable, 3.3V, and 5V, versions, and +25V for the 12V and 15V versions, to force the output transistor OFF.Note 7. V IN =60V.Note 8. The oscillator frequency reduces to approximately 11 kHz in the event of an output short or an overload which causes the regulated output voltage to drop approximately 40% from the nominal output voltage. This self protections feature lowers the average power dissipation of the IC by lowering the minimum duty cycle from 5% down to approximately 2%.Feb. 2014 – R1.0- 5 -HTCTYPICAL OPERATING CHARACTERISTICFeb. 2014 – R1.0- 6 -HTCAPPLICATION INFORMATIONAs in any switching regulator, layout is very important. Rapidly switching currents associated with wiring inductance generate voltage transients which can cause problems. For minimal inductance and ground loops, the length of the leads indicated by heavy lines should be kept as short as possible. Single-point grounding (as indicated) or ground plane construction should be used for best results. When using the Adjustable version, physically locate the programming resistors near the regulator, to keep the sensitive feedback wiring short.- Fixed Output Voltage VersionLM2576HV L1100uH Regulated OutputInput Voltage VIN OUTPUT5VON/OFF Feed backC IN +GND+ C OUT100uF D11000uFMBR360- Adjustable Output Voltage VersionLM2576HV L1100uH Regulated Output Input Voltage VIN OUTPUT5VR2ON/OFF FeedbackC IN +GND+ C OUT100uF D11000uF R1MBR360R2*VOUT = VREF(1+R1)* R2 = R1(VOUT-1) VREFwhere V REF= 1.23V, R1 between 1KΩ and 5KΩ.- C IN : 100uF, 75V, Aluminum Electrolytic- C OUT : 1000uF, 25V, Aluminum Electrolytic- D1 - Schottky, MBR360- L1 : 100uH, Pulse Eng. PE-92108- R1 : 2K, 0.1%- R2 : 6.12K, 0.1%提供专业的智能电子锁触摸解决方案,并提供电子锁整套的芯片配套:低功耗触摸芯片低功耗单片机马达驱动芯片显示驱动芯片刷卡芯片时针芯片存储芯片语音芯片低压MOS管 TVS二极管低功耗触摸按键芯片OWEIS触摸芯片：JM01S JM02S JM04S JM08S JM12MCOWEIS电源芯片: JM2575S-12 JM2575S-3.3 JM2575S-5.0 JM2575S-ADJ JM2575T-12 JM2575T-3.3 JM2575T-5.0 JM2575T-ADJ JM2576S-12 JM2576S-3.3 JM2576S-5.0 JM2576S-ADJ JM2576T-12 JM2576T-3.3 JM2576T-5.0 JM2576T-ADJ LM2596S-12 LM2596S-3.3 LM2596S-5.0 LM2596S-ADJ LM2596T-12 LM2596T-3.3 LM2596T-5.0 LM2596T-ADJOWEIS接口芯片:JM485S JM3485S JM232S JM232TS JM3232S JM3232TS JM1040SOWEIS语音芯片：JM085S JM170S JM341S JM682S电源管理芯片:LM2575S-12 LM2575S-3.3 LM2575S-5.0 LM2575S-ADJ LM2575SX-12LM2575SX-3.3 LM2575SX-5.0 LM2575SX-ADJ LM2575SX-12/NOPB LM2575SX-3.3/NOPB LM2575SX-5.0/NOPB LM2575SX-ADJ/NOPB LM2575T-12 LM2575T-3.3 LM2575T-5.0 LM2575T-ADJ LM2575T-12/NOPB LM2575T-3.3/NOPB LM2575T-5.0/NOPB LM2575T-ADJ/NOPB LM2575HVS-12 LM2575HVS-3.3 LM2575HVS-5.0LM2575HVS-ADJ LM2575HVSX-12 LM2575HVSX-3.3 LM2575HVSX-5.0 LM2575HVSX-ADJLM2575HVSX-12/NOPB LM2575HVSX-3.3/NOPB LM2575HVSX-5.0/NOPB LM2575HVSX-ADJ/NOPBLM2575HVT-12 LM2575HVT-3.3 LM2575HVT-5.0 LM2575HVT-ADJ LM2575HVT-12/NOPBLM2575HVT-3.3/NOPB LM2575HVT-5.0/NOPB LM2575HVT-ADJ/NOPB LM2576S-12 LM2576SX-12LM2576SX-5.0 LM2576SX-12/NOPB LM2576SX-3.3/NOPB LM2576SX-5.0/NOPB LM2576SX-ADJ/NOPB LM2576T-12 LM2576T-12/NOPB LM2576T-3.3/NOPB LM2576T-5.0/NOPBLM2576T-ADJ/NOPB LM2576HVS-12 LM2576HVS-3.3 LM2576HVS-5.0 LM2576HVS-ADJLM2576HVSX-12 LM2576HVSX-3.3 LM2576HVSX-5.0 LM2576HVSX-ADJ LM2576HVSX-12/NOPBLM2576HVSX-3.3/NOPB LM2576HVSX-5.0/NOPB LM2576HVSX-ADJ/NOPB LM2576HVT-12LM2576HVT-3.3 LM2576HVT-5.0 LM2576HVT-ADJ LM2576HVT-12/NOPB LM2576HVT-3.3/NOPBLM2576HVT-5.0/NOPB LM2576HVT-ADJ/NOPB LM2596S-12 LM2596SX-12 LM2596SX-3.3 LM2596SX-5.0LM2596SX-ADJ LM2596SX-12/NOPB LM2596SX-3.3/NOPB LM2596SX-5.0/NOPBLM2596SX-ADJ/NOPB LM2596T-12 LM2596T-12/NOPB LM2596T-3.3/NOPB LM2596T-5.0/NOPBLM2596T-ADJ/NOPB LM2596HVS-12 LM2596HVS-3.3 LM2596HVS-5.0 LM2596HVS-ADJLM2596HVSX-12 LM2596HVSX-3.3 LM2596HVSX-5.0 LM2596HVSX-ADJ LM2596HVSX-12/NOPBLM2596HVSX-3.3/NOPB LM2596HVSX-5.0/NOPB LM2596HVSX-ADJ/NOPB LM2596HVT-12 LM2596HVT-3.3LM2596HVT-5.0 LM2596HVT-ADJ LM2596HVT-12/NOPB LM2596HVT-3.3/NOPBLM2596HVT-5.0/NOPB LM2596HVT-ADJ/NOPB LM2576S-3.3TR LM2576S-5TR LM2576S-5.0TRLM2576S-12TR LM2576S-ADJTR LM2576T-3.3 LM2576T-5.0 LM2576T-12 LM2576T-ADJLM2575S-3.3TR LM2575S-5TR LM2575S-5.0TR LM2575S-12TR LM2575S-ADJTR LM2575T-3.3 LM2575T-5.0LM2575T-12 LM2575T-ADJ LM2596S-3.3TR LM2596S-5TR LM2596S-5.0TRLM2596S-12TR LM2596S-ADJTR LM2596T-3.3 LM2596T-5.0 LM2596T-12 LM2596T-ADJLM2576TV-ADJ LM2576TV-ADJG LM2576T-ADJ LM2576T-ADJG LM2576D2T-ADJ LM2576D2T-ADJGLM2576D2T-ADJR4 LM2576D2T-ADJR4G LM2576TV-3.3 LM2576TV-3.3G LM2576T-3.3LM2576T-3.3G LM2576D2T-3.3 LM2576D2T-3.3G LM2576D2T-3.3R4G LM2576D2TR4-3.3LM2576D2TR4-3.3G LM2576TV-005 LM2576TV-5G LM2576T-005 LM2576T-5G LM2576D2T-005LM2576D2T-5G LM2576D2T-5.0R4G LM2576D2T-005G LM2576D2TR4-005 LM2576D2TR4-5GLM2576TV-12 LM2576TV-12G LM2576TV-012G LM2576T-0120 LM2576T-012G LM2576D2T-012LM2576D2T-12G LM2596D2T-12R4G LM2576D2T-012G LM2576D2TR4-012 LM2576D2TR4-12GLM2576D2TR4-012G LM2576TV-15 LM2576TV-15G LM2576TV-015G LM2576T-015 LM2576T-15GLM2576T-015G LM2576D2T-015 LM2576D2T-15G LM2576D2T-015G LM2576D2TR4-015LM2576D2TR4-15G LM2576D2TR4-015G LM2596TVADJG LM2596TADJG LM2596DSADJGLM2596DSADJR4G LM2596D2T-3.3R4G LM2596D2T-5G LM2596D2T-5R4G LM2596T-3.3G LM2596T-5G LM2596-12G LM2575TV-ADJG LM2575T-ADJG LM2575D2T-ADJG LM2575D2T-ADJR4GNCV2575D2T-ADJG NCV2575D2T-ADJR4G LM2575TV-3.3G LM2575T-3.3G LM2575D2T-3.3GLM2575D2T-3.3R4G LM2575TV-5G LM2575T-5G LM2575D2T-5G LM2575D2T-5R4GNCV2575D2T-5G NCV2575D2T-5R4G LM2575TV-012G LM2575T-012G LM2575D2T-012GLM2575D2T-12R4G NCV2575D2T-12G NCV2575D2T-12R4G LM2575TV-015G LM2575T-015GLM2575D2T-015G LM2575D2T-15R4G LM2576-12BU LM2576-3.3BU LM2576-5.0BU LM2576BULM2576-12BT LM2576-3.3BT LM2576-5.0BT LM2576BT LM2576-12WU LM2576-3.3WU LM2576-5.0WU LM2576WULM2576-12WU-TR LM2576-3.3WU-TR LM2576-5.0WU-TR LM2576WU-TRLM2576-12WT LM2576-3.3WT LM2576-5.0WT LM2576WT LM2596T-3.3 LM2596T-5.0 LM2596T-12LM2596T-ADJ LM2596TV-3.3 LM2596TV-5.0 LM2596TV-12 LM2596TV-ADJ LM2596R-3.3LM2596R-5.0 LM2596R-12 LM2596R-ADJ LM2576DP-5.0 LM2576DP-ADS LM2576T-3.3 LM2576T-5.0 LM2576T-12 LM2576T-ADJ LM2576R-3.3 LM2576R-5.0 LM2576R-12LM2576R-ADJ LM2575R-3.3 LM2575R-5.0 LM2575R-12 LM2575R-ADJP2576L-33-TA5-T P2576L-50-TA5-T P2576L-12-TA5-T P2576L-AD-TA5-TP2576L-33-TB5-T P2576L-50-TB5-T P2576L-12-TB5-T P2576L-AD-TB5-TP2576L-33-TQ5-R P2576L-50-TQ5-R P2576L-12-TQ5-R P2576L-AD-TQ5-RP2576L-33-TQ5-T P2576L-50-TQ5-T P2576L-12-TQ5-T P2576L-AD-TQ5-TP2576G-33-TA5-T P2576G-50-TA5-T P2576G-12-TA5-T P2576G-AD-TA5-TP2576G-33-TB5-T P2576G-50-TB5-T P2576G-12-TB5-T P2576G-AD-TB5-TP2576G-33-TQ5-R P2576G-50-TQ5-R P2576G-12-TQ5-R P2576G-AD-TQ5-RP2576G-33-TQ5-T P2576G-50-TQ5-T P2576G-12-TQ5-T P2576G-AD-TQ5-TP2576G-50-S08-R P2576G-12-S08-R P2576G-AD-S08-R P2576G-50-SH2-RP2576G-12-SH2-R P2576G-AD-SH2-R欧司朗发光二极管:LTW5SG-GZJX-35 LTW5SN LUWC9EN LUWC9EN-N4N6-EG LUWC9SMLUWC9SM-N1N3-EG LUWC9SP LUWC9SP-8K6L-EG LUWCHCP LUWCJSN LUWCJSN-GYHY-EULW-35LUWCN7M LUWCN7M-HYJY-EMKM-1 LUWCNAP LUWCPDP LUWCPDP-KULQ-5C8E-1 LUWCPDP-KULQ-5E8G-1 LUWCQ7P LUWCQ7P-LPLR-5C8E-1 LUWCQDP LUWCQDP-LQLS-MJMW LUWCRDP LUWCRDP-LSLU-MCML-1140… LUWE6SG LUWF65N LUWF65N-KYMX-5P7R LUWH9GP.CELUWH9GP.CE-KYLY-EMKM-1 LUWH9QP LUWH9QP-5M8M-HNJN-1 LUWHWQP LUWHWQP-8M7N-ebvF46fcbB46-8E8H LUWJDSH.EC LUWJDSH.EC-FTGP-5E8G-L1N2 LUWJDSI.PCLUWJDSI.PC-FTGP-5C8E-L1N2 LUWJNSH.PC LUWJNSH.PC-BUCQ-5E8G-1 LUWW5AM LUWW5AM-KZLY-6P7R LUWW5AP LUWW5AP-MYNY-4C8E LUWW5SM LUWW5SM-KXLX-4C8E LWA673LWA673-P1S1-5K8L LWA67C LWA67C-T2U2-5K8L LWA6SG LWA6SG-V2BA-JKPL LWC9ENLWC9EN-F0GB-58 LWC9SN LWC9SN-F0HA-58 LWE67C LWE6SC LWE6SC-U1V1-5K8L-1 LWE6SGLWE6SG-V2AB-5K8L-1 LWETSG LWETSG-AABB-JKPL-1 LWG6CP LWG6CP-EAFA-JKQL-1 LWL283LWM673 LWM673-P1Q2-3K6L LWM673-L1N1-JKPL LWM673-P1R2-FKPL LWM67C LWM67C-S1U2-5K8LLWP473 LWP473-Q2S1-3K8L-1 LWP4SG LWP4SG-V2AB-JKPL-1 LWQ38E LWQ38E-Q1S2-3K6L-1LWQ38G LWQ38G-Q2OO-3K5L-1 LWT673 LWT673-P1S1-5K8L LWT673-P1S1-FKPL LWT67CLWT67C-T2U2-5K8L LWT6SC LWT6SC-T2V1-5K8L LWT6SC-S2V1-5K8L LWT6SGLWT6SG-V1AA-FKKL LWT6SG-V2BA-5K8L LWTTSD LWTTSD-U2V2-JKPL-1 LWVG8E LWW5AMLWW5AM-KYLX-5K8L LWW5PM LWW5PM-KXKZ-5K8L LWW5SM LWW5SM-KXLX-JKQL-24E4LYA67F LYA67F-U2AB-36 LYE65F LYE65F-DBFA-46-3B5A LYE65F-DAEA-35-3B5A LYG6SPLYG6SP-CADB-36-1 LYG6SP-CBEB-36-3B5A LYL196 LYM676 LYM676-Q2T1-26LYM676-Q2S1-26 LYM67K LYM67K-J1L2-26 LYP47B LYP47B-T2V1-26-1 LYT66FLYT66F-ABBB-4D-1-20 LYT66F-ABCA-46-3A4B LYT66F-ABBB-35-3A4B LYT676 LYT676-R1S2-26 LYT676-R1T1-26 LYT67F LYT67F-U1AA-36-1 LYT67K LYT67K-J2M1-26LYT686 LYT686-Q2T1-26 LYT68B LYW5AP LYW5AP-KYLZ-36 LYW5SM SFH4232A ZYT676ADS触摸芯片：TQ01 TS01Q TQ02 TH01TS01S AWS01 TS02NT TS04 TS06 TS08NT TS08NC TS08NE TS08P TS12 TSM12S TSM12MC TSM16C TS20博晶微/晶尊微触摸芯片:SC01A SC02A SC04A SC05A SC09A SC12A通泰触控芯片: TTP223-BA6 TTP223-CA6 TTP223N-BA6 TTP223N-HA6 TTP223N-CA6 TTP223N-DO8 TTP233B-BA6 TTP233B-HA6 TTP233C-BA6 TTP233C-HA6 TTP233D-HA6 TTP233D-BA6 TTP233D-QA6 TTP233D-MA6 TTP233D-RB6 TTP233D-SB6 TTP239-BSF TTP239-COBN TTP223E TTP223E-BA6 TTP223E-CA6 TTP223E-HA6 TTP233F-QA6TTP226-809SN TTP259-ASFN TTP229-AQG TTP229-BSF TTP229-LSFN TTP229-KSFN TTP232-BA6 TTP232-CA6 TTP224B TTP224B-BSBN TTP224B-BSBN TTP224B-COBN TTP224B-COBN TTP224B-SQBN TTP224B-RO8N TTP224B-BCBN TTP224B-RC8N TTY6952B合泰触摸控制芯片：BS801B BS801C BS802B BS802C BS804B BS804C BS806B BS806C BS808B BS808CBS83A04A-3 BS83B08-3 BS83B08A-3 BS83B08A-4 BS83A02A-4 BS83A02A-4 BS83A02A-4 BS83A04A-3BS83A04A-4 BS83B08A-3 BS83B08A-4 BS83B12A-3 BS83B12A-3 BS83B12A-4 BS83B12A-4 BS83B16A-3BS83B16A-3 BS83B16A-4 BS83B16A-4 BS82B12A-3 BS82C16A-3 BS82D20A-3 BS83A01C BS83A02C BS83B04CBS83B08C BS83B12C BS83B16C BS83B24C BS83C40C BS83B08-3 BS83B12-3 BS83B16-3 BS83C24-3 BS83C24-3 BS84B08A-3 BS84B08A-3 BS84B08A-3 BS84B08A-3 BS84B08A-3 BS84B08A-3 BS84C12A-3 BS84C12A-3BS84C12A-3 BS84C12A-3 BS84C12A-3 BS84C12A-3低功耗单片机:STM8L052C6T6 STM8L052R8T6 STM8L152C6T6 STM8L152R8T6 STM32L151C8T6 STM32L152RBT6 STM32L051C8T6指纹识别芯片:AS608 QS808马达驱动芯片:MX08E L9110S BA6287F-E2显示驱动芯片:74HC595PW 74HC164PW刷卡芯片:MFRC52202HN1/RC522 MFCV520/CV520 FM17520 FM17522 MS520 MS522时针芯片:PCF8563T AIP8536 IN1363DT VC8563T DQ8563T存储芯片:W25Q32JVSSIQ W25Q32BVSSIG W25Q32FVSSIG AT24C32D-SSHM-T GD25Q32BSIG GD25Q32CSIG FM25Q32 FM24C32语音芯:AP23085 AP23341 AP89085 AP89341K低压MOS管:SI2300 SI2301 SI2302 AO3400 AO3401 AO3402TVS二极管:SMAJ6.0CA SMAJ15CACAN收发器：TJA1040T TJA1042T TJA1043T TJA1044T TJA1050T TJA1051T TJA1052T TJA1053TMCP2515-I/SO MCP2515T-I/SO MCP2515-I/ST MCP2515T-I/ST网络接口芯片：MAX485ESA MAX485EESA MAX485CSA MAX485ED ST3485EBDR ST3485ECDR ADM485ARZADM485EARZ SP485EN SP485EEN ILX485DT MAX4853ESA MAX3485EESA MAX3485CSA ST3485EBDRST3485ECDR ADM3485ARZ ADM3485EARZ SP3485EN SP3485EEN ILX3485DT MAX232ESE MAX232EESEMAX232CSE MAX232DR MAX232IDR MAX232EIDR ST232BDR ST232CDR ST232EBDR ST232ABDR ADM232AARNZ ADM232AARW ADM232LAR SP232ECN SP232EEN ILX232DT MAX232EIPWR ST232BTR ST232ABTR ST232CTRST232ACTR MAX3232ESE MAX3232EESE MAX3232CSE MAX3232CDR MAX3232ECDR MAX3232IDR MAX3232EIDR ST3232CDR ST3232BDR ST3232EBDR ST3232ECDR ADM3232EARN SP3232EEN ILX3232DT MAX3232EEAEST3232CTR ST3232BTR ST3232EBTR ST3232ECTR ADM3232EARUZ SP3232EEA SP3232EEY ILX3232TS电源管理芯片：LM2575 LM2576 LM2596 IL2576 IL2596 XL2596 XL2576 TD2576 TD2596ADI模数转换器:AD7705BRZ AD7705BURZ AD7706BRZ AD7706BURZ AD7715ANZ-3 AD7715ANZ-5 AD7715ARZ-3REEL AD7715ARZ-5REELAMS奥地利微低频唤醒芯片:AS3933-BTST AS3933-BQFTCKS中科芯单片机:CKS32F030K6T6 CKS32F030C8T6 CKS32F051C8T6 CKS32F051R8T6 CKS32F103C8T6CKS32F103R8T6聚洵零漂移运算放大器GS8592-SR GS8592-MR GS8594-TR GS8594-SR GS6554-TR GS6554-SR GS6552-SR GS6552-MR GS6551-CR GS6551-TR GS8551-TR GS8551-SR GS8552-SR GS8552-MR GS8554-TR GS8554-SR GS8331-TR GS8331-CR GS8331-SR GS8331Y-TR GS8331Y-CR GS8332-SR GS8332-MR GS8332-FR GS8334-TR GS8334-SR聚洵高速运算放大器：GS8091-CR GS8091-TR GS8091N-CR GS8091N-TR GS8092-SR GS8092-MR GS8092N-MR GS8094-TR GS8094-SR GS8054-TR GS8054-SR GS8052N-MR GS8052-SR GS8052-MR GS8051N-CRGS8051N-TR GS8051-CR GS8051-TR聚洵高精度运算放大器：GS358-SR GS358-MR GS358-DR GS358-FR GS321Y-CR GS321Y-TR GS321-CRGS321-TR GS8721-CR GS8721-TR GS8721-SR GS8722-SR GS8722-MR GS8724-TR GS8724-SR GS8631-CR GS8631-TR GS8631-SR GS8632-SR GS8632-MR GS8634-TR GS8634-SR GS8631N-TR聚洵纳安级运算放大器：GS6041-CR GS6041-TR GS6041-SR GS6041-MR GS6042-SR GS6042-MR GS6042-FR GS6043-SR GS6043-MR GS6044-TR GS6044-SR聚洵高压摆率运放：GS2771-TR GS2772-SR GS2772-MR GS2774-TR GS2774-SR GS2771N-TR聚洵低电压低功耗运算放大器：GS6001A-CR GS6001A-TR GS6001-CR GS6001-TR GS6001Y-CR GS6001Y-TR GS6002-SR GS6002-MR GS6004-SR GS6004-MR深圳市奥伟斯科技有限公司，优势产品未尽详细，欢迎来电查询！！！。

深圳唯创知音电子有限公司Shenzhen Waytronic Electronic Co.,Ltd语音芯片说明书WT588E02B-8S（SPI）V3.11免责申明:深圳唯创知音电子有限公司申明；说明书以官网资料为准，如若资料内容有更新，不会一一进行通知。

如若使用IC时导致侵犯到第三方专利或其他权利，不承担任何责任。

如若使用我司IC，在航空卫星军事设备，人身安全等领域，造成了重大财产损失或生命伤害，甚至生命死亡，我司不承担任何责任。

目录产品简介 (3)1.概述 (4)2.功能简述 (4)3.管脚描述 (4)3.1.管脚分布图 (5)4.极限参数 (5)5.电气特性 (5)6.SPI串口通讯 (6)6.1.管脚分配 (6)6.2.语音地址对应关系 (6)6.3.播放指令 (6)6.4.数据更换指令 (7)6.5.SPI时序图 (7)7.WT588E02B系列更换升级 (8)7.1.更换时序说明 (9)8.BIN文件制作或T3Z文件制作 (9)9.程序范例 (10)10.封装管脚图 (16)说明书以官网和业务员提供为准版本记录：版本号修改说明修改日期V2.00原始版本2020-09-26 V2.01将原理图做成独立文档2020-11-06 V2.02修改关于待机功耗的说明2020-11-10 V2.03封装图修改2021-04-26 V3.00远程更换升级2021-11-26 V3.01应用原理图更新2021-12-03 V3.02修改指令部分笔误2021-12-08 V3.03修改连码段数2021-12-23 V3.04修改Demo Code Bug2021-12-27 V3.05应用原理图细节修改2022-02-16 V3.06关于上位机操作相关的文字描述更改2022-02-24 V3.07更新描述和去除不必要参数、修改笔误、更新示例代码2022-03-01 V3.08修改章节顺序以及一些笔误处，并添加SPI模式的说明2022-03-04 V3.09修改SPI模式说明2022-03-22 V3.10修改8.1章时序图细节上的错误2022-03-29 V3.11增加远程更换流程图的文字说明2022-07-13产品简介语音更新1.在线更新：可通过软件SPI通讯方式将Bin文件或T3Z文件传输到语音芯片，实现在线更新。

上海海栎创微电子有限公司HAA2820数据手册5W单声道、带有AGC防破音功能、AB/D切换、自适应电荷泵升压、自适应MUTE功能的音频功率放大器Rev：V1.02018/03/01HAA2820数据手册1.概述HAA2820是一款内置电荷泵升压的D类音频功率放大器，在4.2V电源电压的情况下，可以为4Ω负载送出5W（THD+N=10%）的输出功率。

HAA2820内置AGC模式，当输入信号较高的时候，可以自动降低内部增益，防止输出发生截顶失真，提升大音量播放音乐时的音质。

HAA2820带有OT，OC，OVP，UVLO等保护功能，有效保护芯片。

2.芯片特点◆最大输出功率: 5.06W (4.2V,4Ω,10%THD+N)；4.2W (4.2V,4Ω,1%THD+N)◆AGC Function◆AB、D function◆底噪：47uVrms(Gain=16V/V, Class D)；30uVrms(Gain=12V/V, Class AB)◆THD+N：0.005%◆效率: 71%(3.6V, 4Ω,2W)◆自适应MUTE功能◆自适应电荷泵升压功能◆UVLO，OTP，OCP◆eTSSOP-163.引脚分布/说明4.功能描述4.1 Ctrl<2:1> ControlHAA2820有四种工作状态，通过Ctrl<2:1>两个控制管脚进行控制，如下图所示。

00时芯片关断，关断电流小于1uA。

01的时候为D类工作模式，同时AGC功能开启，当输出将要出现截顶失真的时候，主动降低内部增益，使输出保持非截顶失真的状态，提高音质，有效保护喇叭。

10的时候为D类工作模式，AGC功能关闭。

11的时候为AB类工作模式，同时电荷泵不升压，处于直通模式，消除芯片对FM信号的EMI影响。

模式切换的时候需要先将Ctrl<1:0>置为00，将芯片关闭复位，再进入需要的工作模式，以防止出现异常的切换杂音。

上海海栎创微电子有限公司Hynitron MicroelectronicsCST340高性能互电容多点触控芯片Shanghai Hynitron Microelectronics Co.,Ltd1．概要CST340系列多点电容触控芯片，支持单层，多层模组及多种图案，采用10V 以上高压驱动，实现高性能，高灵敏度，低功耗的真实多点触摸(带压力检测)。

相较传统的低压驱动可提供更高的信噪比和抗干扰能力。

同时，芯片内部自互一体电容感应模块，结合智能扫描算法，在实现快速反应的同时，具有优异的抗噪、防水、低功耗表现。

2．特性高性能电容检测电路及DSP 模块 自互一体检测模块；高压驱动，实现高灵敏度，高信噪比采样； 支持被动电容触摸笔； 支持待机手势唤醒功能； 支持在线编程； 内置看门狗；多个按键支持。

性能指标 典型刷新率100Hz ；带水操作，大拇指识别及大手掌抑制； 动态模式下典型功耗：4mA ； 监控模式下典型功耗：350uA ；睡眠模式下典型功耗：50uA 。

电容屏支持最多支持40个驱动/感应通道，并支持TX/RX 互换；通道悬空/下拉设计支持；支持传统的DITO 和SITO 及各种图案；模组参数自动调校，最大支持阻抗达120K ；Cover Lens 厚度支持，玻璃<=2mm 亚克力<=1mm 。

通讯接口I2C 主/从通讯接口，速率10Khz~1Mhz 可配置；GPIO 支持多种工作模式可配，内置上拉电阻模式；内置1.8V LDO ，兼容1.8V/VDDA 接口电平可配。

芯片运行后VDD18输出1.8V ，VDDHV 输出驱动高压6~12V 。

电源供电 单电源供电2.7V ~3.6V ，电源纹<=50mv ； 少量的外围器件。

封装类型：QFN526mm*6mm 。

3．应用手机，平板，笔记本，触摸板等。

4．典型应用电路图C1 2.2uF/10VC2: 0.1uF ~ 1uF/10VC310nF ~ 100nF/16VR3: 200VDDIO VDDA VDD18R1/R2I2C 5K Sensor ID TX RX GND5．引脚排列X 2X 1X 0S S AX 25X 24X 23X 22X 21X 20X 19X 18X 17V D D 18N C I R Q N C N C S D A S C L V D D H V R S T n T X 0T X 1T X 2T X 36．引脚描述14VDD18PWR/O 1.8V，0.1~1.0uF40TX17I/O电容Tx/Rx通道15NC NC空脚41TX18I/O电容Tx/Rx通道16IRQ I/O中断42TX19I/O电容Tx/Rx通道17NC NC空脚43TX20I/O电容Tx/Rx通道18NC NC空脚44TX21I/O电容Tx/Rx通道19SDA I/O I2C数据信号45TX22I/O电容Tx/Rx通道20SCL I/O I2C时钟信号46TX23I/O电容Tx/Rx通道21VDDHV PWR/O max12V，10~100nF47TX24I/O电容Tx/Rx通道22RST n I复位引脚，低有效48TX25I/O电容Tx/Rx通道23TX0I/O电容Tx/Rx通道49VSSA GND模拟地24TX1I/O电容Tx/Rx通道50RX0I/O电容Rx/Tx通道25TX2I/O电容Tx/Rx通道51RX1I/O电容Rx/Tx通道26TX3I/O电容Tx/Rx通道52RX2I/O电容Rx/Tx通道I Input Only仅输入O Output Only仅输出I/O Input And Output输入和输出7.订购信息料号封装表面印字包装CST340QFN52-6*6(P0.40T0.55)方向点+LOGO+CST340+PO2500/盘，编带出货8.极限参数表9.电气特性9.1直流(DC)电气特性环境温度25 C，VDDA=2.8V。