磁力架说明书_Magnetic Stand Manual_MCE

For other service manuals visit our website at:

/service_manuals.asp

DORNER MFG. CORP.INSIDE THE USAOUTSIDE THE USA

P

.O. Box 20 • 975 Cottonwood Ave.

TEL: 1-800-397-8664TEL: 262-367-7600

Hartland, WI 53029-0020 USAFAX: 1-800-369-2440FAX: 262-367-5827

851-566 Rev. FMulti Tier Stands

Installation, Maintenance & Parts Manual

Dorner Mfg. Corp.2851-566 Rev. F

Multi Tier StandsTable of Contents

Introduction......................................................................... 2

Warnings - General Safety.................................................. 3

Product Description............................................................. 4

Specifications...................................................................... 4

Multi Tier Support Stand Models.................................... 4

Installation........................................................................... 5

Page 1 / 14© 2023 MAGTROL |

Due to continual product development, Magtrol reserves the right to modify specifications without forewarning.HD SERIES

HD SERIESHYSTERESIS DYNAMOMETERSMAGTROL offers 3 types of dynamometer brakes to absorb load: Hysteresis (

HD Series), Eddy-Current (WB Series) and Magnetic Powder (PB Series). Each type of Dynamometer has advantages and limitations and choosing the correct one will depend largely on the type of testing to be performed. With over 50 standard models to choose from, Magtrol Sales professionals are readily available to assist in selecting the proper Dynamometer to meet your testing needs.

FEATURES ▪16 Standard Models with Maximum Torque from 2.5 oz·in to 500 lb·in (18 mN·m to 56.5 N·m) ▪14 High Speed Models Available ▪Hysteresis Braking System: provides precise torque loading independent of shaft speed ▪Motor Testing: from no load to locked rotor ▪Standard Torque Units: SI (English & Metric available upon request) ▪Accuracy: ± 0.25 % (full scale) ▪Air Flow Sensor: For protection against overheating and operator error ▪Base Plates: available in long or short versions ▪Custom Dynamometers: for special torque and speed requirements ▪Easy CalibrationDESCRIPTIONHysteresis Brake Dynamometers (HD Series) are versatile and ideal for testing in the low to medium power range (maximum 14 kW intermittent duty). With a Hysteresis Braking system, the Dynamometers do not require speed to create torque, and there-fore can provide a full motor ramp from free-run to locked rotor. Brake cooling is provided by convection (no external source), by compressed air or by dedicated blower, depending on the model. All Magtrol Hysteresis Dynamometers have accuracy ratings of ± 0.25 % (full scale) depending on size and system configuration.To better integrate dynamometers into systems, Magtrol offers both long and short base plates. The shorter base plate facili-tates easier motor mounting when used with T-slot tables and Magtrol Adjustable Motor Fixtures, where as the long base plates are better suited for table top testing.APPLICATIONSMagtrol motor test systems can be found in test labs, at inspec-tion stations, and on the manufacturing floors of most of the world’s leading manufacturers, users and certifiers of small to medium sized electric, pneumatic and hydraulic motors, as well as internal combustion engines. Magtrol supplies motor test systems for a wide array of industries including: Appliance, Auto-motive, Aviation, Computer, HVAC, Lawn and Garden, Medical and Dental, Electric Motor, Office Equipment and Power Tools.Fig. 1: HD-715 | Hysteresis Dynamometer Page 2 / 14© 2023 MAGTROL |

McFarlane Aviation, LLC. 785-594-2741

696 E 1700 RD 785-594-3922 Fax

Baldwin City, KS 66006

***************************

1549 Rev ~ (Original)

Installation Instructions, Stabilizer Hinge Brackets

Caution: When installing new brackets, either the original Tailcone Reinforcement Angle (a.k.a. hockey stick)

or the TAIL CONE ANGLE KIT (STC SA02522AK, if eligible) must be in place to facilitate proper bracket positioning and alignment. Do not remove the bracket and the tailcone reinforcement angle at the same time. If

also installing the TAIL CONE ANGLE KIT, it typically should be installed first – before the brackets.

McFarlane recommends changing both brackets at the same time, even if only one bracket is defective.

Note: These installation instructions are written assuming McFarlane TOOL136, Stabilizer Bracket Installer is

Medea®

Enhanced multi-level merchandisingCounters

23Medea®Self-service counter for multi-level convenienceWhether a part of a serve-over counter line, an island layout with a crown end unit or an individual wall-sited unit – Medea is an ideal solution to meet the store‘s different needs.

Customer benefi ts• Loading fl exibiltiy and high footprint utilization by up to four display levels• Different modular lengths and heights for fl exibility in store planning• Multiplexible with serve-over counters• Optimized energy effi ciency and performance with EC fans

• High-quality, easy-to-clean materials • Fan-assisted air circulation• Display depths (750 mm and 900 mm)• 3 cabinet heights (SD-ST-SQ)• 3 base heights (600 mm, 540 mm and 400 mm)

Options• Canopy and shelf lighting• Product dividers• Pricing rail• Cabinet with pedestals• Electric defrost heater• Terminal rail for third party controller• Integrated night blind