400W270Vin5Vout全砖军用模块电源

CAUTIONTO REDUCE THE RISK OF ELECTRIC SHOCK:Use only in dry locations and only indoors.DO NOT plug into another relocatable power tap.DO NOT “daisy chain” surge protectors.DO NOT use with any aquarium equipment.DO NOT use if properly grounded outlets are not available.DO NOT install this device if there is less than 10 meters (30 feet) of wire between the electrical outlet and electrical service panel.DO NOT use for medical or life support equipment. This device features an internal protection that will disconnect the surge protective component at the end of its useful life, but it will maintain unprotected power to the load.FOR MORE INFORMATIONVisit for more information regarding: • Product information and certifications• Product warranty• Connected equipment guarantee TECHNICAL SUPPORTVisit: /supportT oll-Free: 1-877-297-6937Hours of Operation: Monday - Friday: 7:00am - 6:00pm CST © 2023 Cyber Power Systems (USA), Inc. All rights reserved.All other trademarks are the property of their respective owners.FEATURES1. Protected LED IndicatorIlluminated when the surge protection feature is working properly.2. Grounded LED IndicatorIlluminated when the ground protection feature is working properly.3. ON/OFF Reset Control Switch and Circuit BreakerControls power to all outlets. The switch is also a 15 A breaker.When an overload occurs, it will automatically switch off. T o resume operation, ensure the overload condition is removed and reset the surge protector by switching the unit ON.4. Safety CoversAll outlets on this surge protector include safety covers. Slide the plastic outlet cover over outlets that are not used. This ensuresthe safety of children and prevents potential electric shocks and damage caused by highly dusty environments.5. Always-On Grounded Outlets (2)Provides continuous power regardless of whether the Master and Master controlled outlets are on or off.6. Energy-Saving Master Controlled Grounded Outlets (4)Automatically switched on or off by master outlet.7. Energy-Saving Master Grounded OutletAutomatically switches four master controlled outlets on or off.8. Transformer-spaced Grounded Outlet (1)Easily plug in large chargers without interfering with the other outlets.9. Threshold SwitchAdjusts the threshold at which the energy saving outlets adjust the switch according to the device plugged into the Master outlet.High mode: For high wattage devices such as a TV or PC.Low mode: For low wattage devices such as a laptop.TROUBLESHOOTINGIf the ON/OFF is switched OFF, the 15Amp circuit breaker may have tripped.Examine your connected equipment andremove the device that is overloading thecircuit. Then, turn the ON/OFF switch backto RESET.If the grounded indicator does not lightwhen you plug in the surge protector,move the surge protector to a differentgrounded three-prong AC outlet. If itstill does not light, return the productto the retailer for assistance. If thesurge protector appears to be workingproperly, your outlets may not be properlygrounded and need to be repaired by aprofessional electrician.If the grounded indicator turns off aftera period of use, the surge protection hasbeen depleted. Replace yoursurge protector.If the protected indicator does not light,the surge protector’s AC lines are nolonger protected from surge. The surgeprotector may have received a powersurge or spike beyond its specified limitsthat overloaded the protection circuitryand rendered it inactive. The surgeprotector has protected your connectedequipment as designed, but it will notprotect against future surges, and spikes. Itshould be replaced.If the Master-controlled outlets don’t turnon or off when your laptop computer orTV is connected to the Master outlet:1. The power drawn from the MasterOutlet must be below the thresholdsetting (High/Low) for the MasterControlled Outlets to turn off. Somecomputers will continue to consumepower during battery charging or instandby mode. In this case, pleasemake sure hibernate or sleep mode isenabled on your computer.2. The power drawn from the MasterOutlet must be above the thresholdsetting (High/Low) for the MasterControlled Outlets to turn on. Somecomputers and TVs will not drawenough power to turn on the MasterControlled outlets. In this case, pleasetry plugging a different primary deviceinto the Master Outlet or make sure thethreshold switch is set to Low.7-OUTLET ENERGY SAVINGSURGE PROTECTORP705GUSER MANUALYOUR ULTIMATE ALL Y IN POWERCyber Power Systems (USA), Inc.4241 12th Avenue East, Suite 400 | Shakopee, MN 55379SPECIFICATIONSModel Number: P705GGrounded Outlets: Standard Outlets (6),Transformer-spaced Outlet (1)Surge Protection: 2,100 JoulesElectrical Rating: 125 V / 15 A / 1875 WUL Clamping Voltage: UL 1449 3rd / 400 V (L-N, L-G, N-G)Maximum Peak Current: 105,000A3 AC Lines Protected: L-N: 45,000 A; L-G: 30,000 A;N-G: 30,000 A(The maximum surge possible onhousehold wiring is 6,000 volts)Response Time: Less than 1 nanosecondAttenuation: Up to 32 dBCircuit Breaker: Resettable 15 AmpEMI/RFI Filtration: 150 kHz to 100 MHzi W ARNING: This product can expose you to chemicals including bisphenol A (BPA)and styrene (ABS), which is known to the State of California to cause reproductiveharm and cancer. For more information, go to .CONFORMANCE APPROVALSThis device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipmentgenerates, uses, and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may causeharmful interference to radio communications.However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interfer-ence to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try tocorrect the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.WARNING: Changes or modifications not expressly approved by theparty responsible for compliance could void the user’s authority tooperate the equipment.。

跟大家来分享的是军用电源模块、军用雷达电源的相关资料。

首先我们来看河南兵峰电子科技公司所做的军用电源模块、军用雷达电源的产品参数：
环境要求：贮存温度：-30~+90℃（特殊需要可做到-40℃）
工作温度：JI 级：-35~+60℃JII 级：-35~+90℃
产品特点:双路输出，高效率，高可靠性，低温升，低纹波噪声，体积小，功率密度大；
自然冷却，全灌封，防潮、免维护；
具有工作状态及故障指示功能；具有输入过压、输入欠压、输出过压、输出过流、输出短路及过热保护功能
应用：雷达中信号接收与处理电路的供电
技术参数：输入：220Vac±20%，50±3Hz；（可根据顾客的具体需求进行设计）输出：5V10A,15V7.5A；（可根据顾客的具体需求进行设计）
工作效率：90%~98%；
绝缘电阻：普通室内环境下≥100MΩ，湿热环境下≥2MΩ；
可闻噪声：无；
冷却方式：自然冷却；
以上技术参数仅供参考，可根据本客户的具体需求进行调整。

看所定制军用电源模块、军用雷达电源的产品特点：
高效率，高可靠性；
高压，大功率，能满足客户特大功率的需求；
低功耗，降低损耗，节能环保，防潮，防霉菌，免维护；
体积小，低温升，低纹波噪声，响应速度快；
具有输入过压、输入欠压、输出过流、输出短路及过热保护功能。

DC TO AC POWER INVERTERPWRINV400W INSTRUCTION MANUALSAVE THIS MANUALYou will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.Basic Operation•Make sure that you choose the right operating voltage for both input and output of the inverter.•When unpacking, make sure that the inverter is in good condition. If any parts are missing or broken, please call AIMS Power, Inc. at the number found on the warranty card.•Place the power inverter on a flat surface. Make sure it has adequate ventilation and is not in direct sunlight. Fasten the inverter securely to the surface, using screws or some othermeans. If holes are to be drilled, follow safe, proper installation techniques.•Before you connect the battery cables, make sure the power switch is in the off position.Connect Red (+) battery cable to Red (+) inverter terminal. Connect Black (-) battery cable to Black (-) inverter terminal. Connect Red (+) battery cable to Red (+) battery terminal. Connect Black (-) battery cable to Black (-) battery terminal. Alligator clamp cables may be used but only to connect to the battery. Do not use clamps on inverter terminals. Alligator clamps are not a permanent solution. You may see a spark during connection.•Connect the ground cable to an earth ground, such as a metal water pipe or to the vehicle ground when used in a vehicle if the inverter includes a ground port.•Turn the power switch to the on position, which is located on the front of the inverter. The green LED light will confirm that AC power is present.•Before plugging the equipment into the inverter, make sure the equipment AND the inverter are off. Turn inverter on first, then turn on the equipment.•The power inverter can be used either while the engine is running or off.Warnings•Unplug the inverter when it is not in use.•If the AC inverter makes a beeping sound, turn off the equipment, unpl ug the inverter and restart the vehicle’s engine. The beeping sound is simply the low-battery warning, which indicates that the voltage of your battery is getting low. If you do not re-start your engine and continue operating the inverter, the inverter will automatically shut off, leavingyour vehicle's battery at about 10. 5 VDC. This will allow you to start your engine and resumeoperation of the inverter. It also reduces the fear of being stranded with a dead battery(dependent on health of battery).•This device should only be serviced by a qualified technician. This item does not have any serviceable parts.•Prevent body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerator enclosures during installation.•Do not operate the inverter if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgement or reflexes are impaired while taking drugs. Ifthere is any doubt, do not operate the inverter.•People with pacemakers should consult their physician(s) before using this product.Electromagnetic fields in close proximity to a heart pacemaker could cause interference to or failure of the pacemaker.•Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, or extension cords.•Store idle equipment. When not in use, inverter must be stored in a dry location to prevent rust. Always lock up tools and the inverter and keep out of reach of children.•Size the inverter properly. Size the inverter for the surge rating of your equipment. The inverter’s continuous rating should be MORE than the surge rating of your equipment.Example: Power tool runs at 1500 watts but surges at 2500 watts. You should use an inverter >3000 watts.•Keep the inverter well-ventilated. Do not place any objects on top of or next to the inverter or allow anything to cover the cooling fans; doing so can cause the inverter to overheat,causing a potential fire hazard and/or damage to the inverter. Leave adequate ventilationspace underneath the inverter as well; thick carpets or rugs can obstruct air flow, causing the inverter to overheat.•Avoid unintentional starting. Be sure the switch is in the OFF position when not in use and before plugging in any appliance.Note: Performance of this unit may vary depending on the available battery power or appliance wattage.Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by operator. Guard against electric shock. Do not open the metal case; risk of electric shock.Battery Use•To avoid over-discharging your vehicle battery, we recommend running your engine for 10-20 minutes to recharge the vehicle's battery if battery voltage drops <11V.•To properly size your battery, use the following formula: Volts * Amps = Watts or Watts/Volts = Amps. Example: 1000 watt inverter / 12 volts DC = 83.3 DC amps. In this example, you willneed 83.3 amps to power a 1000 watt load for 1 hour. If you need to power 1000 watts for 2hours you will need 83.3 * 2 = 166.66 DC amps available. A 100 amp hour battery will giveyou 100 amps / 166.66 = .6 hours so you will need two batteries if using 100 amp battery.This is if you fully deplete your batteries. We do NOT recommend fully depleting yourbatteries. This is just an example. Your power requirements may be different.•If you choose to use a female 12 Volt DC adapter for your inverter or to the inverter make sure wire size is correct.•IF YOU CONNECT THE WIRES TO THE INCORRECT TERMINALS, YOU WILL REVERSE THE POLARITY AND DAMAGE THE INVERTER.•REVERSED POLAR ITY WILL INSTANTLY VOID THE WARRANTY OF YOUR INVERTER, SO BE CAREFUL TO CONNECT YOUR INPUT WIRES PROPEPLY.•If you choose to operate a battery charger to replenish your battery’s voltage, be sure to check with charger manufacture before damaging the charger.•CONNECTING THE INVERTER’S DC INPUT TO A BATTERY CHARGER WILL VOID THE WARRANTY, AND MAY DAMAGE THE INVERTER.•Make sure that the battery voltage does not exceed 15 volts DC.•CONNECTING THE INVERTER TO A DC POWER SOURCE GREATER THAN 15 VDC WILL VOID THE WARRANTY, AND MAY DAMAGE THE INVERTER.CablesWe recommend that you refrain from using battery cables longer than 12 feet between the DC power source and the DC input of the inverter. Longer battery cables on the DC input will create a voltage drop which results in a reduction of efficiency and output. If you require more than 12 feet, use a bigger cable. We recommend using an extension cord between the AC output and AC appliance. You may use up to 100ft, high quality extension cord. A longer cord may result in reduced output. See Specifications chart for recommended battery cable size.Remote On/Off SwitchSome models include a remote port. An AIMS remote on/off switch may be connected to the remote port. The optional remote on/off switch is a convenientoption to turn the inverter on/off if the inverter is installed in a hard to reach area. Make sure the inverter is turned off before installing the remote switch. Plug the switch into the remote jack and then turn the main switch to the OFF position for the remote to work properly.Measuring The AC VoltageThe output waveform of the inverter is a MODIFIED SINE WAVE. If you choose to measure the AC output voltage, you must use a TRUE RMS MULTI METER. Using any other type of voltage measuring device will result in an AC voltage reading of 10 to 30 volts lower than actual voltage. When using a true RMS multi meter, you will get an accurate reading.SAFETY PRECAUTIONS•Do not open the case of the inverter. The high voltage inside the unit is the same type of power as your electrical outlets at home.•Do not let the cord of the inverter, or any appliance cord get wet. If you are operating the inverter in a moving vehicle, we recommend that you secure the inverter to prevent it fromshifting around while the vehicle is moving.•Do not operate this inverter in or around water. Water can damage the inverter, and water damage is not covered under warranty. Also, do not operate the inverter with wet hands. The AC voltage of the unit makes it an electrical shock hazard if operated with wet hands.•Allow at least 12 inches of clearance around the Inverter for air flow. Ensure the ventilation openings on the rear and bottom of the unit are not obstructed.•Do not connect the inverter directly to another AC power source. Damage may result, and such damage will void the inverter warranty.•Know the wattage requirements of your appliance. Use only those appliances which are limited by the capacity of this unit.•Use common sense. This device produces power just like your wall outlets at home and should be treated seriously. Keep it away from children.•Reversed polarity of AC power outlet LINE /NEUTRAL will void the warranty.•If there is anything wrong with the inverter, disconnect all of the power and contact technical support.If the Inverter does not appear to be functioning properly, check the following possible causes:•Poor contact: Clean contact parts thoroughly.•If the low battery alarm sounds, this means the input voltage is too low and battery needs to be recharged.•If you are getting a low output voltage, try reducing the load to minimize watts. You may have overloaded the inverter. Reduce your load. Also, keep input voltage above 10.5 volts tomaintain a constant flow of power.•If you are not getting any power output, turn the power switch Off and On again, until the green power light comes on. Your devices may draw too much power to operate them. Theinverter may be in thermal shutdown. Let it cool down and make sure there is adequateventilation around the unit.•If the green light turns red one of the following has happened:A.input voltage is too lowB.input voltage is too highC.short circuitD.inverter is close to overload•Battery voltage is too low: Start the engine to recharge the battery. Replace or recharge battery if needed.•Shuts down on overload: Reduce the wattage of your load.•Thermal shutdown: Under heavy loads for extended period, the inverter will shut down to prevent damage from excess heat. Simply reduce your load and allow theInverter to cool down.•Low-battery shutdown: Recharge your battery and resume operation.Very little maintenance is required to keep your inverter operating properly. You should disconnect input power first and then clean the exterior of the unit periodically with a dry cloth to prevent accumulation of dust and dirt. At the same time, tighten the screws on the DC input terminals.PLEASE READ THE FOLLOWING CAREFULLYNeither the manufacturer nor distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/or distributor expressly states that allrepairs and parts replacements should be undertaken by certified and licensed technicians and not by the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto.WARRANTYAIMS Corp., Inc. dba AIMS Power Warranty Instructions:This product is designed using the most modern digital technology and under very strict quality control and testing guidelines. If, however, you feel this product is not performing as it should, please contact us:**************************(775)359-6703We will do our best to resolve your concerns. If the product needs repair or replacement, make sure to keep your receipt/invoice, as that will need to be sent back along with the package and RMA# prepaid to AIMS. You have a full 1 year warranty from date of purchase.This warranty is valid worldwide with the exception that freight and duty charges incurred outside the contiguous 48 United States will be prepaid by customer.Except as provided above, AIMS makes no warranty of any kind, express or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose. In no event shall AIMS be liable for indirect, special or consequential damages. This warranty only applies to AIMS Power branded products. All other name brand products are warranted by and according to their respective manufacturer. Please do not attempt to return non-AIMS Power branded products to AIMS Power.For additional products such as:-Modified sine wave inverters-Pure sine wave inverters-Low Frequency Inverters-Solar Charge Controllers-Micro Grid Tied Inverters-Inverter Chargers and Automatic transfer switches-Converters DC-DC-Custom cut cables-Batteries-Solar Panels & RacksPlease visit our web site: Tofindoutwheretobuyanyofourproducts,youmayalsoe-mail:************************ (775)359-6703.。

常⽤替换运放型号对⽐常⽤替换运放型号对⽐CA3130 ⾼输⼊阻抗运算放⼤器 Intersil[DATA] CA3140 ⾼输⼊阻抗运算放⼤器 CD4573 四可编程运算放⼤器 MC14573ICL7650 斩波稳零放⼤器 LF347(NS[DATA]) 带宽四运算放⼤器 KA347 LF351 BI-FET单运算放⼤器 NS[DATA] LF353 BI-FET双运算放⼤器 NS[DATA] LF356 BI-FET单运算放⼤器 NS[DATA] LF357 BI-FET单运算放⼤器 NS[DATA] LF398 采样保持放⼤器 NS[DATA] LF411 BI-FET单运算放⼤器 NS[DATA] LF412 BI-FET双运放⼤器 NS[DATA] LM124 低功耗四运算放⼤器(军⽤档) NS[DATA]/TI[DATA] LM1458 双运算放⼤器 NS[DATA] LM148 四运算放⼤器 NS[DATA] LM224J 低功耗四运算放⼤器(⼯业档)NS[DATA]/TI[DATA] LM2902 四运算放⼤器 NS[DATA]/TI[DATA] LM2904 双运放⼤器 NS[DATA]/TI[DATA] LM301 运算放⼤器 NS[DATA] LM308 运算放⼤器 NS[DATA] LM308H 运算放⼤器（⾦属封装） NS[DATA] LM318 ⾼速运算放⼤器NS[DATA] LM324(NS[DATA]) 四运算放⼤器 HA17324,/LM324N(TI) LM348 四运算放⼤器 NS[DATA] LM358 NS[DATA] 通⽤型双运算放⼤器 HA17358/LM358P(TI) LM380 ⾳频功率放⼤器NS[DATA] LM386-1 NS[DATA] ⾳频放⼤器NJM386D,UTC386 LM386-3 ⾳频放⼤器 NS[DATA] LM386-4 ⾳频放⼤器 NS[DATA] LM3886 ⾳频⼤功率放⼤器 NS[DATA] LM3900 四运算放⼤器 LM725 ⾼精度运算放⼤器NS[DATA] LM733 带宽运算放⼤器 LM741 NS[DATA] 通⽤型运算放⼤器HA17741 MC34119 ⼩功率⾳频放⼤器 NE5532 ⾼速低噪声双运算放⼤器 TI[DATA] NE5534 ⾼速低噪声单运算放⼤器TI[DATA] NE592 视频放⼤器 OP07-CP 精密运算放⼤器 TI[DATA] OP07-DP 精密运算放⼤器 TI[DATA] TBA820M ⼩功率⾳频放⼤器 ST[DATA] TL061 BI-FET单运算放⼤器 TI[DATA] TL062 BI-FET双运算放⼤器 TI[DATA] TL064 BI-FET 四运算放⼤器 TI[DATA] TL072 BI-FET双运算放⼤器 TI[DATA] TL074 BI-FET四运算放⼤器 TI[DATA] TL081 BI-FET单运算放⼤器TI[DATA] TL082 BI-FET双运算放⼤器 TI[DATA] TL084 BI-FET四运算放⼤器 TI[DATA] AD824 JFET输⼊,单电源,低电压,低功耗,精密四运算放⼤器 MC33171 单电源,低电压,低功耗运算放⼤器 AD826 低功耗,宽带,⾼速双运算放⼤器 MC33172 单电源,低电压,低功耗双运算放⼤器AD827 低功耗,⾼速双运算放⼤器 MC33174 单电源,低电压,低功耗四运算放⼤器 AD828 低功耗,宽带,⾼速双运算放⼤器 MC33178 ⼤电流,低功耗,低噪⾳双运算放⼤器 AD844 电流反馈型,宽带,⾼速运算放⼤器 MC33179 ⼤电流,低功耗,低噪⾳四运算放⼤器 AD846 电流反馈型,⾼速,精密运算放⼤器 MC33181 JFET输⼊,低功耗运算放⼤器 AD847 低功耗,⾼速运算放⼤器 MC33182 JFET输⼊,低功耗双运算放⼤器AD8531 COMS单电源,低功耗,⾼速运算放⼤器 MC33184 JFET 输⼊,低功耗四运算放⼤器 AD8532 COMS单电源,低功耗,⾼速双运算放⼤器 MC33201 单电源,⼤电流,低电压运算放⼤器AD8534 COMS单电源,低功耗,⾼速四运算放⼤器 MC33202 单电源,⼤电流,低电压双运算放⼤器 AD9617 低失真，电流反馈型,宽带,⾼速,精密运算放⼤器 MC33204 单电源,⼤电流,低电压四运算放⼤器 AD9631 低失真，宽带,⾼速运算放⼤器MC33272 单电源,低电压,⾼速双运算放⼤器 AD9632 低失真，宽带,⾼速运算放⼤器 MC33274 单电源,低电压,⾼速四运算放⼤器 AN6550 低电压双运算放⼤器 MC33282 JFET输⼊,宽带,⾼速双运算放⼤器AN6567 ⼤电流,单电源双运算放⼤器 MC33284 JFET输⼊,宽带,⾼速四运算放⼤器 AN6568 ⼤电流,单电源双运算放⼤器 MC33502 BIMOS,单电源,⼤电流,低电压,双运算放⼤器 BA718 单电源,低功耗双运算放⼤器MC34071A 单电源,⾼速运算放⼤器 BA728 单电源,低功耗双运算放⼤器 MC34072A 单电源,⾼速双运算放⼤器 CA5160 BIMOS,单电源,低功耗运算放⼤器 MC34074A 单电源,⾼速四运算放⼤器 CA5260 BIMOS,单电源双运算放⼤器 MC34081 JFET输⼊,宽带,⾼速运算放⼤器 CA5420 BIMOS,单电源,低电压,低功耗运算放⼤器 MC34082 JFET输⼊,宽带,⾼速双运算放⼤器 CA5470 BIMOS单电源四运算放⼤器 MC34084 JFET输⼊,宽带,⾼速四运算放⼤器CLC400 电流反馈型,宽带,⾼速运算放⼤器 MC34181 JFET输⼊,低功耗运算放⼤器 CLC406 电流反馈型,低功耗,宽带,⾼速运算放⼤器 MC34182 JFET输⼊,低功耗双运算放⼤器 CLC410 电流反馈型,⾼速运算放⼤器 MC34184 JFET输⼊,低功耗四运算放⼤器 CLC415 电流反馈型,宽带,⾼速四运算放⼤器 MC35071A 单电源,⾼速运算放⼤器 CLC449 电流反馈型,宽带,⾼速运算放⼤器 MC35072A 单电源,⾼速双运算放⼤器 CLC450 电流反馈型,单电源,低功耗,宽带,⾼速运算放⼤器 MC35074A 单电源,⾼速四运算放⼤器 CLC452 单电源,电流反馈型,⼤电流,低功耗,宽带,⾼速运算放⼤器 MC35081 JFET输⼊,宽带,⾼速运算放⼤器CLC505 电流反馈型,⾼速运算放⼤器 MC35082 JFET输⼊,宽带,⾼速双运算放⼤器 EL2030 电流反馈型,宽带,⾼速运算放⼤器 MC35084 JFET输⼊,宽带,⾼速四运算放⼤器 EL2030C 电流反馈型,宽带,⾼速运算放⼤器 MC35171 单电源,低电压,低功耗运算放⼤器 EL2044C 单电源,低功耗,⾼速运算放⼤器 MC35172 单电源,低电压,低功耗双运算放⼤器 EL2070 电流反馈型,宽带,⾼速运算放⼤器 MC35174 单电源,低电压,低功耗四运算放⼤器 EL2070C 电流反馈型,宽带,⾼速运算放⼤器 MC35181 JFET输⼊,低功耗运算放⼤器 EL2071C 电流反馈型,宽带,⾼速运算放⼤器 MC35182 JFET输⼊,低功耗双运算放⼤器 EL2073 宽带,⾼速运算放⼤器 MC35184 JFET输⼊,低功耗四运算放⼤器 EL2073C 宽带,⾼速运算放⼤器 MM6558 低电压,低失调电压,精密双运算放⼤器 EL2130C 电流反馈型,宽带,⾼速运算放⼤器MM6559 低电压,低失调电压,精密双运算放⼤器 EL2150C 单电源,宽带,⾼速运算放⼤器 MM6560 低电压,低失调电压,精密双运算放⼤器 EL2160C电流反馈型,宽带,⾼速运算放⼤器 MM6561 低功耗,低电压,低失调电压,精密双运算放⼤器 EL2165C 电流反馈型,宽带,⾼速,精密运算放⼤器 MM6564 单电源,低电压,低功耗,低失调电压,精密双运算放⼤器 EL2170C 单电源,电流反馈型,低功耗,宽带,⾼速运算放⼤器MM6572 低噪⾳,低电压,低失调电压,精密双运算放⼤器 EL2175C 电流反馈型,宽带,⾼速,精密运算放⼤器 NE5230单电源,低电压运算放⼤器 EL2180C 单电源,电流反馈型,低功耗,宽带,⾼速运算放⼤器NE5512 通⽤双运算放⼤器 EL2224 宽带,⾼速双运算放⼤器 NE5514 通⽤四运算放⼤器 EL2224C 宽带,⾼速双运算放⼤器NE5532 低噪⾳,⾼速双运算放⼤器 EL2232 电流反馈型,宽带,⾼速双运算放⼤器NE5534 低噪⾳,⾼速运算放⼤器 EL2232C 电流反馈型,宽带,⾼速双运算放⼤器 NJM2059 通⽤四运算放⼤器 EL2250C 单电源,宽带,⾼速双运算放⼤器 NJM2082 JFET输⼊,⾼速双运算放⼤器 EL2260C 电流反馈型,宽带,⾼速双运算放⼤器 NJM2107低电压,通⽤运算放⼤器 EL2270C 单电源,电流反馈型,低功耗,宽带,⾼速双运算放⼤器 NJM2112 低电压,通⽤四运算放⼤器EL2280C 单电源,电流反馈型,低功耗,宽带,⾼速双运算放⼤器 NJM2114 低噪⾳双运算放⼤器 EL2424 宽带,⾼速四运算放⼤器NJM2115 低电压,通⽤双运算放⼤器 EL2424C 宽带,⾼速四运算放⼤器 NJM2119 单电源,精密双运算放⼤器 EL2444C 单电源,低功耗,⾼速四运算放⼤器 NJM2122 低电压,低噪⾳双运算放⼤器 EL2450C 单电源,宽带,⾼速四运算放⼤器 NJM2130F 低功耗运算放⼤器 EL2460C 电流反馈型,宽带,⾼速四运算放⼤器 NJM2132 单电源,低电压,低功耗双运算放⼤器 EL2470C 单电源,电流反馈型,低功耗,宽带,⾼速四运算放⼤器 NJM2136 低电压,低功耗,宽带,⾼速运算放⼤器 EL2480C 单电源,电流反馈型,低功耗,宽带,⾼速四运算放⼤器NJM2137 低电压,低功耗,宽带,⾼速双运算放⼤器 HA-2640 ⾼耐压运算放⼤器 NJM2138 低电压,低功耗,宽带,⾼速四运算放⼤器 HA-2645 ⾼耐压运算放⼤器 NJM2140 低电压双运算放⼤器 HA-2839 宽带,⾼速运算放⼤器NJM2141 ⼤电流,低电压双运算放⼤器 HA-2840 宽带,⾼速运算放⼤器 NJM2147 ⾼耐压,低功耗双运算放⼤器 HA-2841 宽带,⾼速运算放⼤器 NJM2162 JFET输⼊,低功耗,⾼速双运算放⼤器HA-2842 宽带,⾼速运算放⼤器 NJM2164 JFET输⼊,低功耗,⾼速四运算放⼤器 HA-4741 通⽤四运算放⼤器 NJM3404A 单电源,通⽤双运算放⼤器 HA-5020 电流反馈型,宽带,⾼速运算放⼤器 NJM3414 单电源,⼤电流双运算放⼤器 HA-5127 低噪⾳,低失调电压,精密运算放⼤器 NJM3415 单电源,⼤电流双运算放⼤器 HA-5134 低失调电压,精密四运算放⼤器 NJM3416 单电源,⼤电流双运算放⼤器 HA-5137 低噪⾳,低失调电压,⾼速,精密运算放⼤器 NJM4556A ⼤电流双运算放⼤器 HA-5142 单电源,低功耗双运算放⼤器NJM4580 低噪⾳双运算放⼤器 HA-5144 单电源,低功耗四运算放⼤器 NJU7051 CMOS单电源,低功耗,低电压,低失调电压运算放⼤器 HA-5177 低失调电压,精密运算放⼤器 NJU7052 CMOS单电源,低功耗,低电压,低失调电压双运算放⼤器 HA-5221 低噪⾳,精密运算放⼤器 NJU7054 CMOS单电源,低功耗,低电压,低失调电压四运算放⼤器 HA-5222 低噪⾳,精密双运算放⼤器 NJU7061 CMOS单电源,低功耗,低电压,低失调电压运算放⼤器 HA-7712 BIMOS,单电源,低功耗,精密运算放⼤器NJU7062 CMOS单电源,低功耗,低电压,低失调电压双运算放⼤器 HA-7713 BIMOS,单电源,低功耗,精密运算放⼤器 NJU7064 CMOS单电源,低功耗,低电压,低失调电压四运算放⼤器 HA16118 CMOS单电源,低电压,低功耗双运算放⼤器 NJU7071 CMOS 单电源,低功耗,低电压,低失调电压运算放⼤器 AD704 低偏置电流,低功耗,低失调电压,精密四运算放⼤器 MAX430 CMOS单电源运算放⼤器 AD705 低偏置电流,低功耗,低失调电压,精密运算放⼤器 MAX432 CMOS 单电源运算放⼤器 AD706 低偏置电流,低功耗,低失调电压,精密双运算放⼤器 MAX4330 单电源,低电压,低功耗运算放⼤器 AD707 低失调电压,精密运算放⼤器MAX4332 单电源,低电压,低功耗双运算放⼤器AD708 低失调电压,精密双运算放⼤器 MAX4334 单电源,低电压,低功耗四运算放⼤器 AD711 JFET输⼊,⾼速,精密运算放⼤器 MAX473 单电源,低电压,宽带,⾼速运算放⼤器 AD712 JFET输⼊,⾼速,精密双运算放⼤器 MAX474 单电源,低电压,宽带,⾼速双运算放⼤器 AD713 JFET输⼊,⾼速,精密四运算放⼤器MAX475 单电源,低电压,宽带,⾼速四运算放⼤器AD744 JFET输⼊,⾼速,精密运算放⼤器 MAX477 宽带,⾼速运算放⼤器 AD745 JFET输⼊,低噪⾳,⾼速运算放⼤器 MAX478 单电源,低功耗,精密双运算放⼤器AD746 JFET输⼊,⾼速,精密双运算放⼤器 MAX478A 单电源,低功耗,精密双运算放⼤器 AD795 JFET输⼊,低噪⾳,低功耗,精密运算放⼤器 MAX479 单电源,低功耗,精密四运算放⼤器 AD797 低噪⾳运算放⼤器MAX479A 单电源,低功耗,精密四运算放⼤器 AD8002 电流反馈型,低功耗,宽带,⾼速双运算放⼤器MAX480 单电源,低功耗,低电压,低失调电压,精密运算放⼤器 AD8005 电流反馈型,低功耗,宽带,⾼速双运算放⼤器 MAX492C 单电源,低功耗,低电压,精密双运算放⼤器AD8011 电流反馈型,低功耗,宽带,⾼速运算放⼤器 MAX492E 单电源,低功耗,低电压,精密双运算放⼤器 AD8031 单电源,低功耗,⾼速运算放⼤器 MAX492M 单电源,低功耗,低电压,精密双运算放⼤器 AD8032 单电源,低功耗,⾼速双运算放⼤器MAX494C 单电源,低功耗,低电压,精密四运算放⼤器 AD8041 单电源,宽带,⾼速运算放⼤器 MAX494E 单电源,低功耗,低电压,精密四运算放⼤器 AD8042 单电源,宽带,⾼速双运算放⼤器 MAX494M 单电源,低功耗,低电压,精密四运算放⼤器 AD8044 单电源,宽带,⾼速四运算放⼤器 MAX495C 单电源,低功耗,低电压,精密运算放⼤器 AD8047 宽带,⾼速运算放⼤器 MAX495E 单电源,低功耗,低电压,精密运算放⼤器AD8055 低功耗,宽带,⾼速运算放⼤器 MAX495M 单电源,低功耗,低电压,精密运算放⼤器 AD8056 低功耗,宽带,⾼速双运算放⼤器 MC1458 通⽤双运算放⼤器 AD8072 电流反馈型,宽带,⾼速双运算放⼤器MC1458C 通⽤双运算放⼤器 AD812 电流反馈型,低电压,低功耗,⾼速双运算放⼤器 MC33071A 单电源,⾼速运算放⼤器AD817 低功耗,宽带,⾼速运算放⼤器 MC33072A 单电源,⾼速双运算放⼤器 AD818 低功耗,宽带,⾼速运算放⼤器 MC33074A 单电源,⾼速四运算放⼤器 AD820 JFET输⼊,单电源,低电压,低功耗,精密运算放⼤器 MC33078 低噪⾳双运算放⼤器 AD822 JFET输⼊,单电源,低电压,低功耗,精密双运算放⼤器MC33079 低噪⾳四运算放⼤器 AD823 JFET输⼊,单电源,低电压,低功耗,精密,⾼速双运算放⼤器 MC33102 低功耗双运算放⼤器 HA16119 CMOS单电源,低电压,低功耗双运算放⼤器 NJU7072 CMOS单电源,低功耗,低电压,低失调电压双运算放⼤器 HFA1100 电流反馈型,宽带,⾼速运算放⼤器 NJU7074 CMOS单电源,低功耗,低电压,低失调电压四运算放⼤器 HFA1120 电流反馈型,宽带,⾼速运算放⼤器 OP-07 低漂移,精密运算放⼤器 HFA1205电流反馈型,低功耗,宽带,⾼速双运算放⼤器 OP-113 BICMOS单电源,低噪⾳,低失调电压,精密运算放⼤器 HFA1245 电流反馈型,低功耗,宽带,⾼速双运算放⼤器 OP-150 COMS,单电源,低电压,低功耗 ICL7611 CMOS低电压,低功耗运算放⼤器 OP-160 电流反馈型,⾼速运算放⼤器 ICL7612 CMOS低电压,低功耗运算放⼤器 OP-162 单电源,低电压,低功耗,⾼速,精密运算放⼤器ICL7621 CMOS低电压,低功耗双运算放⼤器 OP-177 低失调电压,精密运算放⼤器 ICL7641 CMOS低电压四运算放⼤器OP-183 单电源,宽带运算放⼤器 ICL7642 CMOS低电压,低功耗四运算放⼤器 OP-184 单电源,低电压,⾼速,精密运算放⼤器ICL7650S 稳压器 OP-191 单电源,低电压,低功耗运算放⼤器 LA6500 单电源，功率OP 放⼤器 OP-193 单电源,低电压,低功耗,精密运算放⼤器 LA6501 单电源，功率OP放⼤器 OP-196 单电源,低电压,低功耗运算放⼤器 LA6510 2回路单电源功率OP放⼤器 OP-200 低功耗,低失调电压,精密双运算放⼤器" LA6512 ⾼压,功率OP放⼤器双运算放⼤器 OP-213 BICMOS单电源,低噪⾳,低失调电压,精密双运算放⼤器 LA6513 ⾼压,功率OP放⼤器双运算放⼤器 OP-250 COMS,单电源,低电压,低功耗双运算放⼤器LA6520 单电源,功率OP放⼤器三运算放⼤器 OP-260 电流反馈型,⾼速双运算放⼤器 LF356 JFET输⼊，⾼速运算放⼤器 OP-262 单电源,低电压,低功耗,⾼速,精密双运算放⼤器 LF356A JFET输⼊，⾼速运算放⼤器 OP-27 低噪⾳,低失调电压,精密运算放⼤器 LF411 JFET输⼊，⾼速运算放⼤器 OP-270 低噪声,低失调电压,精密双运算放⼤器 LF411A JFET输⼊，⾼速运算放⼤器 OP-271 精密双运算放⼤器 LF412 JFET输⼊，⾼速双运算放⼤器 OP-275 ⾼速双运算放⼤器 LF412A JFET输⼊，⾼速双运算放⼤器 OP-279 单电源,⼤电流双运算放⼤器 LF441 低功耗，JFET输⼊运算放⼤器 OP-282 JFET输⼊,低功耗双运算放⼤器 LF441A 低功耗，JFET输⼊运算放⼤器 OP-283 单电源,宽带双运算放⼤器 LF442 低功耗，JFET输⼊双运算放⼤器 OP-284 单电源,低电压,⾼速,精密双运算放⼤器 LF442A 低功耗，JFET输⼊双运算放⼤器OP-290 单电源,低功耗,精密双运算放⼤器 LF444 低功耗，JFET输⼊四运算放⼤器 OP-291 单电源,低电压,低功耗双运算放⼤器 LF444A 低功耗，JFET输⼊四运算放⼤器 OP-292 BICMOS单电源,通⽤双运算放⼤器 LM2902 单电源四运算放⼤器 OP-293 单电源,低电压,低功耗,精密双运算放⼤器 LM2904 单电源双运算放⼤器 OP-295 BICMOS低功耗,精密双运算放⼤器 LM324 单电源四运算放⼤器 OP-296 单电源,低电压,低功耗双运算放⼤器 LM358 单电源双运算放⼤器 OP-297 低电压,低功耗,低漂移,精密双运算放⼤器LM4250 单程控、低功耗运算放⼤器 OP-37 低噪⾳,低失调电压,⾼速,精密运算放⼤器 LM607 低失调电压,精密运算放⼤器 OP-400 低功耗,低失调电压,精密四运算放⼤器 LM6118 宽带,⾼速双运算放⼤器OP-413 BICMOS单电源,低噪⾳,低失调电压,精密四运算放⼤器。

CS6R-395|400|405|410|415|420MS395 W ~ 420 WMORE POWERMORE RELIABLEComprehensive LID / LeTID mitigation technology, up to 50% lower degradation Module power up to 420 W Module efficiency up to 21.5%420 WMinimizes micro-crack impactsBetter shading toleranceLower LCOE & system costCSI Solar Co., Ltd. is committed to providing high quality solar photovoltaic modules, solar energy and battery storage solutions to customers. The company was recognized as the No. 1 module supplier for quality and performance/price ratio in the IHS Module Customer Insight Survey. Over the past 22 years, it has successfully delivered over 88 GW of premium-quality solar modules across the world.* For detailed information, please refer to the Installation Manual.Heavy snow load up to 5400 Pa, wind load up to 2400 Pa*HiKu6 Mono PERCCSI Solar Co., Ltd.199LushanRoad,SND,Suzhou,Jiangsu,China,215129,,********************YearsYearsIndustry Leading Product Warranty on Materials and Workmanship*Linear Power Performance Warranty*1st year power degradation no more than 2%Subsequent annual power degradation no more than 0.55%*Subject to the terms and conditions contained in the applicable Canadian Solar Limited Warranty Statement. Also this 25-year limited product warranty is available only for prod -ucts installed and operating on residential rooftops in certain regions.* The specific certificates applicable to different module types and markets will vary, and therefore not all of the certifications listed herein will simultaneously apply to the products you order or use. Please contact your local Canadian Solar sales representative to confirm the specific certificates available for your Product and applicable in the regions in which the products will be used.PRODUCT CERTIFICATES*MANAGEMENT SYSTEM CERTIFICATES*ISO 9001 : 2015 / Quality management systemISO 14001 : 2015 / Standards for environmental management systemISO 45001 : 2018 / International standards for occupational health & safety IEC62941 : 2019 / Photovoltaic module manufacturing quality systemIEC 61215 / IEC 61730 / CE / INMETRO / MCS / UKCAUL 61730 / IEC 61701 / IEC 62716 / IEC 63126 Level1 / IEC 60068-2-68 UNI 9177 Reaction to Fire: Class 1 / Take-e-wayPARTNER SECTIONENGINEERING DRAWING (mm)Rear ViewMounting HoleCS6R-405MS / I-V CURVES* The specifications and key features contained in this datasheet may deviate slightly from our actu -al products due to the on-going innovation and product enhancement. CSI Solar Co., Ltd. reserves the right to make necessary adjustment to the information described herein at any time without further notice.Please be kindly advised that PV modules should be handled and installed by qualified people who have professional skills and please carefully read the safety and installation instructions before using our PV modules.CSI Solar Co., Ltd.199LushanRoad,SND,Suzhou,Jiangsu,China,215129,,********************VA V A1000 W/m 800 W/m 600 W/m400 W/m200 W/m 5°C 25°C 45°C 65°CMECHANICAL DATASpecificationDataCell TypeMono-crystalline Cell Arrangement 108 [2 X (9 X 6) ]Dimensions1722 ˣ 1134 ˣ 30 mm (67.8 ˣ 44.6 ˣ 1.18 in)Weight21.3 kg (47.0 lbs)Front Cover 3.2 mm tempered glass with anti-reflective coatingFrame Anodized aluminium alloy, J-Box IP68, 3 bypass diodesCable4 mm 2 (IEC), 12 AWG (UL)ConnectorT6 or MC4 or MC4-EVO2 or MC4-EVO2ACable Length(Including Connector)Portrait: 350 mm (16.1 in) (+) / 250mm (11.4 in) (-); landscape: 1100mm (43.3 in)*Per Pallet 35 pieces Per Container (40' HQ)910 pieces* For detailed information, please contact your local Canadian Solar sales and technical representatives.141312111098765432105 10 15 20 25 30 35 40 45 50 55 60 5 10 15 20 25 30 35 40 45 50 55 600 ~ + 10 WFrame Cross Section A-A1413121110987654321ELECTRICAL DATA | STC*CS6R395MS 400MS 405MS 410MS 415MS 420MS Nominal Max. Power (Pmax)395 W 400 W 405 W 410 W 415 W 420 W Opt. Operating Voltage (Vmp)30.6 V 30.8 V 31.0 V 31.2 V 31.4 V 31.6 V Opt. Operating Current (Imp)12.91 A 12.99 A 13.07 A 13.15 A 13.23 A 13.31 A Open Circuit Voltage (Voc)36.6 V 36.8 V 37.0 V 37.2 V 37.4 V 37.6 V Short Circuit Current (Isc)13.77 A 13.85 A 13.93 A 14.01 A 14.09 A 14.17 A Module Efficiency 20.2%20.5%20.7%21.0%21.3%21.5%Operating Temperature -40°C ~ +85°CMax. System Voltage 1500V (IEC/UL) or 1000V (IEC/UL)Module Fire Performance TYPE 1 (UL 61730 1500V) or TYPE 2 (UL 61730 1000V) or CLASS C (IEC 61730)Max. Series Fuse Rating 25 A Application Classification Class A Power Tolerance* Under Standard Test Conditions (STC) of irradiance of 1000 W/m 2, spectrum AM 1.5 and cell tempe -rature of 25°C.ELECTRICAL DATA | NMOT*CS6R395MS 400MS 405MS 410MS 415MS 420MS Nominal Max. Power (Pmax)296 W 300 W 304 W 307 W 311 W 315 W Opt. Operating Voltage (Vmp)28.7 V 28.9 V 29.1 V 29.2 V 29.4 V 29.6 V Opt. Operating Current (Imp)10.33 A 10.39 A 10.45 A 10.52 A 10.58 A 10.65 AOpen Circuit Voltage (Voc)34.6 V 34.8 V 35.0 V 35.1 V 35.3 V 35.5 V Short Circuit Current (Isc)11.09 A 11.15 A 11.21 A 11.28 A 11.34 A 11.41 A * Under Nominal Module Operating Temperature (NMOT), irradiance of 800 W/m 2, spectrum AM 1.5, ambient temperature 20°C, wind speed 1 m/s.Mar. 2023. All rights reserved, PV Module Product Datasheet V2.1C25_ENTEMPERATURE CHARACTERISTICSSpecificationData Temperature Coefficient (Pmax)-0.34 % / °C Temperature Coefficient (Voc)-0.26 % / °C Temperature Coefficient (Isc)0.05 % / °CNominal Module Operating Temperature 41 ± 3°C。

u为防火或防盗应用提供高达2 A 的12 V 待机电流（4 A 的盗警电流）u分别监测多达两个12 V 7-18 Ah 电池（多达36 Ah 的容量）u 提供多达80个小时的待机时间u 方便读取式开关寻址u使用博世标准TR1850插入式变压器B520辅助电源模块是一个辅助电源扩展设备，可通过SDI2总线连接到兼容的报警主机。

此模块受到监测并将所有状态更改传递给报警主机。

工业、商业和机构设施是B520模块的典型安装。

B520地址开关可用于实现轻松设备寻址。

SDI2输出端子为SDI2扩展设备（如键盘）提供辅助电源。

AUX PWR 端子为其他设备（如PIR 移动探测器）提供增强型辅助电源功能。

功能监测监控此模块通过SDI2总线监控并传送有关以下内容的状态信息：•操作（检测信号）•电池1 (BATT 1)•电池2 (BATT 2)•AC 输入电源(AC)•电池电量充足•电池电量不足•电池缺失指示灯•检测信号 [图标]。

当系统正常运行时，蓝色LED 指示灯闪烁亮起和熄灭。

LED 指示灯持续亮起或熄灭指示系统故障。

闪烁三次指示通信故障。

•BATT 1 LED 指示灯。

LED 指示灯呈绿色持续亮起指示BATT 1的电池状态正常工作。

闪烁指示电池电量不足。

闪烁三次指示电池充电器故障。

LED 指示灯熄灭指示电池缺失。

•BATT 2 LED 指示灯。

LED 指示灯呈绿色持续亮起指示BATT 2的电池状态正常工作。

闪烁指示电池电量不足。

闪烁三次指示电池充电器故障。

LED 指示灯熄灭指示电池缺失。

•AC LED 指示灯。

LED 指示灯呈绿色持续亮起指示AC 电源正在工作。

正在执行电池测试时会产生脉冲式LED 指示灯（每秒3个脉冲）。

闪烁指示AC 电源不足或发生故障。

电池充电在AC 电源发生故障的情况下，连接到电池端子的已充满电的电池将为B520提供电源。

如果B520的AC 电源输入发生故障（缺失或电量低），则B520将自动从主电源(AC)切换到备用电源（电池）。

EC03系列-----3W小体积AC-DC模块电源产品特性◆宽压输入85～264Vac（120～370VDC）◆输出短路、过温保护功能◆体积小、重量轻◆高效率、高功率密度，◆低功耗、绿色环保◆工业级产品技术设计应用范围无线网络、电信/数据通信、电力系统、工业控制系统、测量仪器仪表、智能化领域等电源系统。

适合于需要实现输入范围波动大，需要电源隔离，布板空间小等设计，并实现产品功能模块化，提高产品可靠性。

产品型号型号输入电压（VAC）输出电压（VDC）输出电流（mA）纹波+噪声效率(TYP)EC03-S0585～264Vac（120～370VDC）5600150mV(typ)75%EC03-S121225076% EC03-S151520078% EC03-S242412579% EC03-D05±530075% EC03-D12±1212576% EC03-D15±1510078% EC03-D24±246379% *如有其它规格型号需求，可直接联系我司。

输入特性输入电压范围85～264VAC（120～370VDC）输入电流（Vin=110V）0.125A(TYP)外接保险丝★1A/250V慢断输出特性输出电压稳压精度±2%源效应±0.5%(typ)负载调整率(10%~100%)±1%(typ)最小负载10%输出纹波+噪声（峰-峰值）100mV(typ)(20MHz Bandwidth)短路保护可长期短路，自恢复一般特性温度特性工作温度功率降额存储温度外壳温度-40℃～+70℃3.75%/℃，-40℃～+105℃+90℃max掉电时间40ms(typ)/at Vin:320Vdc 湿度85%RH(max)温漂0.02%/℃开关频率60kHz(typ)绝缘输入--输出3000VAC漏电流0.3mA RMS typ.230VAC/50Hz电磁兼容静电放电*射频辐射抗扰*电快速瞬变脉冲群*浪涌*IEC/EN61000-4-2level36kV/8kV IEC/EN61000-4-3IEC/EN61000-4-4level32kV IEC/EN61000-4-5level31kV/2kV传导/辐射*EN55022,level A 安全等级CLASSⅠ外壳等级UL94V-0安装PCB平均无故障时间（MTBF）>200,000h@25℃注：1.以上所列数据除特别说明外，都是在TA=25℃,湿度<75%的条件下测得；2.*表示需要外加EMC推荐电路。

航空交流静变电源是济南能华电源自主研发、设计和制造的，具有当代世界先进水平的机电产品。

它对外输出额定频率400Hz、额定电压115/200V的三相交流中频电源和28.5V直流电源，既可用作具有交流供电系统的各种民用和军用飞机的地面支持电源，又可用作飞机制造厂、维修厂、试飞站、研究所的实验电源。

广泛用于机库、机坪、登机桥、电子车间、实验室等有交流市电供应的使用地点，具有小型化、波形品质好、体积小、重量轻、噪音低、无污染、运行费用低等优点。

可根据用户要求提供固定式、桥挂式和拖车式不同形式的定制。

地面静变电源|航空交流静变电源|军用地面电源:115V400Hz中频静变电源(60hz变频电源，400hz变频电源)是专门为航空及军用电子电气设备设计制造的电源，可用于飞机及机载设备、雷达、导航等军用电子设备,以及其他需要115V400Hz中频电源的场合。

115V400Hz军用电源包含(60hz变频电源，400hz变频电源)以16位微型控制器为核心、以电力电子器件为功率输出单元，采用了数字分频、锁相、波形瞬时值反馈、SPWM脉宽调制、IGBT输出等新技术及模块化结构，具有负载适应性强、效率高、稳定度佳、输出波形品质好、操作简单、体积小、重量轻、智能控制、异常保护功能、输出频率可调、输出反应速度快、过载能力强、全隔离输出，长寿命抗损伤等特点。

115V400Hz航空静变电源(60hz变频电源，400hz变频电源)工作方式IGBT/PWM脉波宽度调制方式航空地面电源使用场所：飞机、直升机＼飞机制造厂＼航天航空设备制造厂＼飞机修理厂＼航修站＼停机坪塔台＼仪表控制中心＼海军侦测系统专用电源＼陆军侦测系统专用电源＼空军侦测系统专用电源＼军用设备专用电源＼雷达专用电源＼舰艇专用电源＼国防＼军事研发单位＼涡轮引擎制造厂方案描述：我公司生产的军事特种电源具备以下优点：1、具备我公司400Hz中频电源的优异的电气性能.2、具有截流功能，可适应电机、整流型等冲击型负载3、电源加装减震装置，防振动、防冲击。

辅助电源/AUX(Auxiliary power supply)：在有些AC/DC电源和DC/DC变换器中，有一个辅助的电源，一般加上输入电压以后就会有输出(少数辅助电源，例如，给风扇的电源也有受控的)，它主要用作控制信号的电源。

“砖”/Brick：DC/DC变换器中，“Brick”是用来表示模块大小的“单位”，有所谓的全砖、半砖、1/4砖、1/8砖、1/16砖等，例如，密封的半砖模块，其大小为2.40×2.30×0.50(单位为英寸)，而开架结构半砖模块的大小为2.40×2.28×0.30（单位为英寸）(高度还有0.34英寸等不同的数值)。

均流端/ CB (Current Balance)：为了增加输出功率，把多个具有相同输出电压和输出功率的电源并联使用，把它们的“CB”端连接在一起，以达到各个模块的输出电流大致相等，以免由于不均流而导致个别电流太大的模块损坏，均流端也有用“PC”，“SWP”，“ C Share”等表示。

立方英尺/分钟和英尺/分钟/CFM(Cube feet minute)、LFM(Line feet minute)：风冷的流量单位，CFM=LFM×面积S。

风速的另一个单位为米/秒。

共模噪声/Common Mode Noise ：指两导体对某个基准点具有大小基本相等，方向相同的噪声，通常指交流输入L线和N线对地的噪声，可通过共模电感和Y电容来抑制它们。

降额/Derating当环境温度较高时(例如50℃以上)，有的电源必须要降低使用的输出功率，另外，有些电源在规定的输入电压范围的低端，不能满足所有的输出参数(例如：电压可调范围或功率)，要降额使用。

动态响应/Dynamic Response ：当负载出现突变时，电源的输出电压会出现瞬间的过冲，然后回到正常输出状态，动态响应关心的是过冲幅度的大小和响应时间的长短。

电磁兼容/EMC(Electromagnetic compatibility) ：指电源在工作中产生的电磁发射要限制在一定的范围内，另外它本身也要有一定的抗干扰能力。

ac-dc电源模块详解
AC-DC模块电源：交流转直流模块电源，可以取代传统变压器、适配器，是一种小型化的开关电源，可以免除因为使用外挂电源适配器，配件又多又烦的困绕。

1.体积小、重量轻：昂鼎的交流转直流模块电源体积为市售产品的一半左右，可以让使用者产品轻薄短小。

2.认证齐全：交流转直流模块电源UL、CE认证齐全，产品品质符合国际标准，是高阶产品选用的最好解决方案。

3.灌胶产品：防潮、防尘、防震，是移动产品、户外产品以及车载、船用电源的最佳解决方案。

4.种类齐全：5W、15W、30W、50W.......等单路以及双路输出提供客户全套的解决方案。

5.AC-DC模块电源：内置率波器跟电容器，无需像市售有些模块电源必须外置这些装置，额外增加成本及空间，这样一点意义都没有。

6.工作温度宽广：从摄氏-40~70度都可以工作，尤其特别适用于户外工业控制器使用。

Z28H12M600NNB DC-DC电源模块【产品描述】1. 产品概述Z28H12M600NNB是标准1/2砖单路隔离稳压输出模块，额定输出电压12V，输出电流50A。

峰值效率可达95%，工作温度范围是：-55℃~ +100℃（壳温）。

采用领先预偏值启动同步整流技术提高了电源效率和同步整流的可靠性；采用有源钳位吸收技术降低了功率MOS管的电压应力，提高功率MOS管的可靠性；采用无光耦的电压反馈环提高了环路的响应速度与稳定性；采用主从模块民主均流法，使能模块能共享电流信号完成自动均流并联应用，可应用于高可靠性的冗余备份系统。

采用多层厚铜PCB与平面变压器工艺提高了电源的功率密度；采用铝外壳灌封工艺提高了电源的抗振动冲击，耐盐雾，耐高温能力。

2. 电气特性●工作电压范围: 16V ~ 40V （瞬态工作电压50V/1S）●额定输出功率600W●工作温度范围是：-55℃~ +100℃（壳温）●输入输出之间基本绝缘1500Vdc●模块可并联均流●固定开关频率PWM控制●无最小负载限制3. 控制特性●控制端子特性(负逻辑)●输出电压补偿●输出电压调节范围：50% ~ 110% Vo(Vo为额定输出电压12V)4. 保护功能●输入欠压锁死●输出过流保护●输出短路保护●输出过压保护●过温保护5. 命名规则6. 结构尺寸机械尺寸图单位mm 7. 引脚定义B +SHARE 并联均流正端(B型功能)3 -SHARE 并联均流负端(B型功能)4 -VIN 输入电压负端5 -VOUT 输出电压负端6 -SNS 远端采样负端7 TRIM 输出电压调整端8 +SNS 远端采样正端9 +VOUT 输出电压正端8. 电气特性输入电容Cin=220uF,输入电压28V，输出电容Cout=220uF,输出12V/600W,环境温度25℃（除非特别提及）。

压输入电压保护点14.4 14.7 15.0 V回差 1.0 V输入电容220 470 uF最大输入电流41 45 A 输入16V输入纹波电流200 400 mA 纹波电流峰峰值，如图9 空载输入电流250 330 mA 输入电压28V 禁止输入电流12 20 mA 输入电压28V，使能关机恢复时间200 us输出电压调节范围-50 +10 %输出过压保护14 14.5 16 V上升时间22 ms如图5，图7 开机瞬态启动延时时间28 ms输出过冲0 5 %V o9. 典型曲线图图1：效率与输出负载电流曲线图，外壳温度25℃图2：损耗功率与输出负载电流曲线图，外壳温度25℃图3：输出电流与铝基板温度降额曲线图图4：输出电压与输出电流曲线图10. 典型波形测试条件：输入电容Cin=220uF,输入电压28V，输出电容Cout=220uF,输出12V/600W,环境温度25℃图5：使能开机波形（负逻辑），3通道为使能控制电平，2通道为输出电压上升波形图6：使能关机波形（负逻辑），3通道为使能控制电平，2通道为输出电压下降波形图7：输入电压开机波形，3通道输入电压波形，2通道为输出电压上升波形图8：输入电压关机波形，3通道输入电压波形，2通道为输出电压下降波形图9：输入电流纹波，输入28V，输入端电容Cin=220uF，输出12V/600W图10：输出电压纹波，输入28V，输出12V/600W,输出电容Cout=220uF。

400hz中频电源产品简介:西安奥盈电气设备有限责任公司生产的400hz中频电源是采用我公司独特专利技术，应用高频电力电子开关变换技术，专门为航空及军用电子电气设备设计制造的400Hz中频静止变频电源，可用于飞机及机载设备、雷达、导航等军用电子设备，以及其它需要400Hz中频电源的场合，是机组式变频电源的换代产品。

本产品电压、频率均有±20%的调节范围，适用于三相平衡及任意不平衡负载，也可作为单相电源使用。

可适应阻性、容性、感性等各种类型负载和各种混合负载。

产品特点:1、采用SPWM专用芯片，控制精度高，波形品质好，可适应各种负载2、IPM高频静止逆变，体积小、重量轻、噪音低、效率高，对外界干扰小3、微处理器控制，输出电压、频率在线可调，运行及故障状态一目了然4、适用于三相平衡负载及任意不平衡负载，也可作单相电源适用5、操作显示数字LED面板，使用灵活方便，使您更为得心应手6、单独使用或装19'标准机柜均可容量500VA1KVA2KVA3KVA5KVA10KVA 输入电压220V±10%输入相位单相/三相四线电路方式IGBT/SPWM脉宽调制方式输出频率400Hz和300～500Hz连续可调负载稳压率≤±1%频率稳定度≤±0.01%波形失真度THD≤2%输出电压0～150V连续可调或0～300V连续可调反应时间≤2mS显示精度4位频率表解析度0.1Hz4位电压表解析度0.1v4位电流表解析度0.01A4位功率表解析度0.1w通讯接口RS232或RS485可选通讯协议MODBUS通讯协议保护功能过压、过流、过温、过载、短路保护及自动报警绝缘电抗500Vdc 20MΩ耐压绝缘1800Vac/5mA/1分钟冷却方式强制风扇制冷工作温度-20℃-40℃相对湿度0-90%（非凝结状态）海拔高度1500公尺尺寸(宽×深×高)410×440×140420×450×180450×440×222560×350×700660×400×800容量15KVA20KVA30KVA45KVA60KVA100KVA 输入电压220V/380V±10%输入相位单相/三相四线电路方式IGBT/SPWM脉宽调制方式输出频率400Hz和300～500 Hz连续可调负载稳压率≤±1%频率稳定度≤±0.01%波形失真度THD≤2%输出电压0～150V连续可调或0～300V连续可调反应时间≤2mS显示精度4位频率表解析度0.1Hz4位电压表解析度0.1v4位电流表解析度0.01A4位功率表解析度0.1w通讯接口RS232或RS485可选通讯协议MODBUS通讯协议保护功能过压、过流、过温、过载、短路保护及自动报警绝缘电抗500Vdc 20MΩ耐压绝缘1800Vac/5mA/1分钟冷却方式强制风扇制冷工作温度-20℃-40℃相对湿度0-90%（非凝结状态）海拔高度1500公尺结构柜式（宽×深×高）尺寸（mm）830×450×11001200×600×1485容量200KVA300KVA输入电压220V/380V±10%输入相位单相/三相四线电路方式IGBT/SPWM脉宽调制方式输出频率400Hz和300～500 Hz连续可调负载稳压率≤±1%频率稳定度≤±0.01%波形失真度THD≤2%输出电压0～150V连续可调或0～300V连续可调反应时间≤2mS显示精度4位频率表解析度0.1Hz4位电压表解析度0.1v4位电流表解析度0.01A4位功率表解析度0.1w通讯接口RS232或RS485可选通讯协议MODBUS通讯协议保护功能过压、过流、过温、过载、短路保护及自动报警绝缘电抗500Vdc 20MΩ耐压绝缘1800Vac/5mA/1分钟冷却方式强制风扇制冷工作温度-20℃-40℃相对湿度0-90%（非凝结状态）海拔高度1500公尺尺寸(宽×深×高)mm1430×750×15601200×1920×1860容量500VA1KVA2KVA3KVA6KVA10KVA 输入电压220V/380V±10%输入相位单相/三相四线电路方式IGBT/SPWM脉宽调制方式输出频率400Hz和300～500 Hz连续可调负载稳压率≤±1%频率稳定度定频≤±0.01%；调频≤±0.1%波形失真度THD≤2%三相不平衡相位120°±2°；相位差<3%额定值输出电压线电压0～260V连续可调或0～520V连续可调相电压0～150V连续可调或0～300V连续可调反应时间≤2mS显示精度4位频率表解析度0.1Hz4位电压表解析度0.1v4位电流表解析度0.01A4位功率表解析度0.1w通讯接口RS232或RS485可选通讯协议MODBUS通讯协议保护功能过压、过流、过温、过载、短路保护及自动报警绝缘电抗500Vdc 20MΩ耐压绝缘1800Vac/5mA/1分钟冷却方式强制风扇制冷工作温度-20℃-40℃相对湿度0-90%（非凝结状态）海拔高度1500公尺结构19英寸机架式柜式尺寸（mm）高5U560×350×670830×450×1100容量15KVA30KVA60KVA100KVA200KVA300KVA 输入电压220V/380V±10%输入相位单相/三相四线电路方式IGBT/SPWM脉宽调制方式输出频率400Hz和300～500 Hz连续可调负载稳压率≤±1%频率稳定度定频≤±0.01%；调频≤±0.1%波形失真度THD≤2%三相不平衡相位120°±2°；相位差<3%额定值输出电压线电压0～260V连续可调或0～520V连续可调相电压0～150V连续可调或0～300V连续可调反应时间≤2mS显示精度4位频率表解析度0.1Hz4位电压表解析度0.1v4位电流表解析度0.01A4位功率表解析度0.1w通讯接口RS232或RS485可选通讯协议MODBUS通讯协议保护功能过压、过流、过温、过载、短路保护及自动报警绝缘电抗500Vdc 20MΩ耐压绝缘1800Vac/5mA/1分钟冷却方式强制风扇制冷工作温度-20℃-40℃相对湿度0-90%（非凝结状态）海拔高度1500公尺结构柜式（宽×深×高）尺寸（mm）830×450×11001200×600×14801200×1920×1860容量450KVA600KVA800KVA1000KVA 输入电压220V/380V±10%输入相位单相/三相四线电路方式IGBT/SPWM脉宽调制方式输出频率400Hz和300～500 Hz连续可调负载稳压率≤±1%频率稳定度≤±0.01%波形失真度THD≤2%输出电压线电压0～380V连续可调相电压0～150V连续可调反应时间≤2mS显示精度4位频率表解析度0.1Hz4位电压表解析度0.1v4位电流表解析度0.01A4位功率表解析度0.1w通讯接口RS232或RS485可选通讯协议MODBUS通讯协议保护功能过压、过流、过温、过载、短路保护及自动报警绝缘电抗500Vdc 20MΩ耐压绝缘1800Vac/5mA/1分钟冷却方式强制风扇制冷工作温度-20℃-40℃相对湿度0-90%（非凝结状态）海拔高度1500公尺单相400hz中频电源（小功率机型）三相400hz中频电源（小功率机型）。

3W/5W ，AC-DC模块电源CB RoHS产品特点●全球通用电压：85-264VAC/100-370VDC ●工作温度范围：-40℃to +70℃●4000VAC 高隔离电压●稳压输出、低纹波噪声●输出短路、过流、过压保护●高效率、高可靠性●全塑料外壳，符合UL94V-0●EMI 性能满足CISPR32/EN55032CLASS B●符合IEC62368、UL62368、EN62368认证标准（认证中）LDE03/05-20Bxx 系列------是金升阳为客户提供的小体积开关模块电源。

该系列电源具有全球输入电压范围、交直流两用、低功耗、高效率、安全隔离等优点。

产品安全可靠。

该系列产品应用在电磁兼容比较恶劣的环境下时必须参考应用电路。

选型表认证型号输出功率标称输出电压及电流(Vo/Io)效率(230VAC/%,Typ.)最大容性负载(uF )UL/CE/CB (认证中)LDE03-20B03 2.3W3.3V/700mA 666000LDE03-20B053W5V/600mA 746000LDE03-20B099V/330mA 751500LDE03-20B1212V/250mA 771500LDE03-20B1515V/200mA 771000LDE03-20B2424V/125mA 78330LDE05-20B03 3.3W 3.3V/1000mA 685000LDE05-20B055W 5V/1000mA 755000LDE05-20B099V/560mA 771200LDE05-20B1212V/420mA 791200LDE05-20B1515V/330mA 791000LDE05-20B2424V/210mA81330输入特性项目工作条件Min.Typ.Max.单位输入电压范围交流输入85--264VAC 直流输入100--370VDC 输入频率47--63Hz输入电流LDE03115V AC ----80mA230V AC ----45LDE05115V AC ----130230V AC----70冲击电流115V AC --10--A230V AC--20--漏电流0.1mA RMS typ.230V AC/50Hz外接保险管推荐值1A/250V ，慢断，必接热插拔不支持项目工作条件Min.Typ.Max.单位输出电压精度 3.3V 输出--±3--%其它--±2--线性调节率满载--±0.5--负载调节率0%-100%负载--±1--输出纹波噪声*20MHz 带宽（峰-峰值）--50100mV 温漂系数--±0.02--%/℃短路保护打嗝式，可长期短路，自恢复过流保护LDE03≥150%Io 自恢复LDE05≥120%Io 自恢复过压保护3.3/5VDC 输出≤7.5VDC 9VDC 输出≤15VDC 12/15VDC 输出≤20VDC 24VDC 输出≤30VDC最小负载0----%掉电保持时间LDE03115V AC 输入--10--ms 230V AC 输入--60--LDE05115V AC 输入--5--230V AC 输入--50--注：*纹波和噪声的测试方法采用平行线测试法，具体操作方法参见《AC-DC 模块电源应用指南》。

EXCELSYS COOLX ®1800HIGH EFFICIENCY, INTELLIGENT AND RELIABLE 1800 W MODULAR POWERSUPPLIESAdvanced Energy's CoolX®1800 series, part of our Excelsysproduct line, is an intelligent modular power supply. TheCoolX1800 delivers an incredible 1800 W in a compact 1U high package with PMBus™ digital communications, control andreliability in addition to the most comprehensive feature set and specifications available.CX18S CX18M Power1800 W 1800 WSlots66CoolingVariable fan speed control Parameters262 mm x 127 mm x 41 mm(10.5 in x 5 in x 1U) CertificationsMedical (CX18M)⏹ I EC60601-1 3rd edition,IEC60601-1-2 4th edition (EMC)⏹ 2 MOPP ⏹ D ual fused ⏹ I SO13485Industrial (CX18S)⏹ I EC60950, IEC62368-1⏹ S EMI F47*Defense/Aero (All Models)⏹ M IL-STD-810GAT A GLANCEPRODUCT HIGHLIGHTS Modular Power Supply ⏹ U p to 1800 W ⏹ U p to 12 outputs ⏹ A ll outputs isolated (1850 VAC)⏹ V ariable fan speed controlReliability ⏹ M TBF > 200,000 hours ⏹ L evel 4 input surge protection ⏹ 23.5 W always ON auxiliary power output ⏹ S afety approved to 5000 m altitude ⏹ 91% efficiency ⏹ F ive-year warrantyFlexibility ⏹ A nalog and digital management — PMBus™ monitoring and control capability⏹ F ield-configurable — plug and playpower⏹ S eries and parallel outputs for higher voltages and currents ⏹ M ounting options — base/side and DIN-Rail mountingTYPICAL APPLICATIONSMedical ⏹ C linical diagnostic equipment, medical lasers, dialysis equipment, radiological imaging, chemical chemistryIndustrial ⏹ T est and measurement, industrial machines, automation equipment,printing, telecommunications, MIL-COTS Audio Equipment ⏹ H i Rel, harsh industrial electronics, radar (marine- and ground-based),communications, test and measurementCOOLX1800 SERIES1Full dynamic specifications may not be met at full load when output voltage is trimmed above 13 V.2Max Trim 14 V when used with High Power Module3Max Trim 56 V when used with High Power Module4 a) Only one High Power module (CmE or CmF) can be used per CoolPac.b) During load transients starting from 0% load on the High Power modules, other modules in the CoolPac may experience an output voltage dynamic during the load change. Contact applications support for details or support..5For the CmG module the max combined power of both outputs is 200 W.6 For the CmH module the max combined power of both outputs is 180 W.*SEMI F47 compliant at input voltages > 180 VAC. Consult Advanced Energy for details.2 COOLX1800 SERIES 3COOLX1800 SERIESELECTRICAL SPECIFICATIONS (CONTINUED)4 COOLX1800 SERIES1Consult AE applications for system level compliance 5COOLX1800 SERIES6 COOLX1800 SERIESMechanical Drawings11Standard airflow direction* Maximum screw penetration from base does not exceed 1.5mm. 78 COOLX1800 SERIES 9COOLX1800 SERIESInput ConnectorsCoolPac ConnectorsStandard (Screw Terminal)Option 1 (IEC Terminal)10 COOLX1800 SERIESCoolMod ConnectorsCOOLX1800 SERIES*CmE or CmF High Power Module (3 slot module) can only occupy Slots D/E/F.Configuration Example 1CoolX part number CX18S-ADG##E-N-A specifies the following product;• CX18S 1800W IEC60950 approved• Slot 1: CmA: 2.5-6.0V (150W)• Slot 2: CmD: 28-58V (300W)• Slot 3: CmG: Dual output 3-30V (120 per channel)• Slot 4: Not Available (CmE is three slot CoolMod module)• Slot 5: Not Available (CmE is three slot CoolMod module)• Slot 6: CmE: 22.8-25.2 (900W)• Option N: Nominal Output voltage settings• Option A: 12V/(1.96)A Bias Supply VoltageConfiguration Example 2CoolX part number CX18M-BABBDC-N-B specifies the following product;• CX18M 1800W IEC60601-1 approved• Slot 1: CmB: 6-15V (280W)• Slot 2: CmA: 2.5-6.0V (150W)• Slot 3: CmB: 6-15V (280W)• Slot 4: CmB: 6-15V (280W)• Slot 5: CmD: 28-58V (300W)• Slot 6: CmC: 15-28V (300W)• Option N: Nominal Output voltage setting• Option B: 5V/(4.7A) Nominal Output voltage setting 11ABOUT ADVANCED ENERGYAdvanced Energy (AE) has devoted more than three decades to perfecting power for its global customers. AE designs and manufactures highly engineered, precision power conversion, measurement and control solutions for mission-critical appli-cations and processes.AE’s power solutions enable customer innovation in complex semiconductor and industrial thin film plasma manufacturing processes, demanding high and low voltage applications, and temperature-critical thermal processes.With deep applications know-how and responsive service and support across the globe, AE builds collaborative partnerships to meet rapid technological developments, propel growth for its customers and power the future of technology.Specifications are subject to change without notice. Not responsible for errors or omissions. ©2021 Advanced Energy Industries, Inc. All rights reserved.Advanced Energy® and AE® are U.S. trademarks, and CoolX® is a U.S. and Europe trademark of Advanced Energy Industries, Inc.For international contact information,visit advancedenergy .com ENG-LV-COOLX1800-235-15 07.21。

产品名称：模块电源1/4标准砖
产品型号：EQBS系列-360W
产品特性：
•最大输出功率为：500W；
•高功率密度：功率密度达169W/inch3；
•高效率: 效率达93% ；
•宽电压调节范围：90% -110%标准输出电压；
•预偏置电压启动/输入过欠压保护/输出过流保护/输出过压保护/过温度保护；•逻辑控制功能；
•并联功能；
•金属外壳封装、塑壳封装、开板等多种安装方式可选。

基本参数：
技术特性：
过温保护点°
C 125
输出过流自恢复重启时间(OCP) sec 5 输出过压自恢复重启时间(OVP) sec 2.5
其它工作温度（机壳表面温度）˚C -55∽+100
存储温度˚C -55∽+125
输入输出隔离电压Vdc 2250 2250 2250 4250 尺寸（长x宽x高）mm 63.1x60.6x12.7
机械规格：
单位：mm；误差: x =+ 0.25 ，xx =+ 0.10；引脚：+ 0.25。

■Model EncodingLAD-600serieshttps:///serviceGTIN.aspxMW Search:■GTIN CODE■DescriptionOutput voltage(B: 27.6V, C: 41.5V, D: 55.2V)Blank: TTL signal onlyU: UART Communication only{Blank Version Built-in battery charger UPS function TTL signals for status detection:AC OK, Battery disconnect, Battery reverse polarity, Battery low, Battery full and Discharge (Blank version only)UART Communication (U version only) Built-in buzzer alarm (U version only)Built-in AC and battery circuit ON/OFF switchs enhance safetynessduring maintenanceForced UPS mode for battery maintenance and improve battery lifeProtections: Short circuit / Overload / Over voltage /Over temperature / Battery low voltage / Battery reverse polarity (No damage)-20 ~ +60 wide operating temperature℃ Output voltage adjustable (-20%~+5%) for CH1 by VR Suitable for lead acid and lithium-ion batteries Design refer to GB17945 system requirement 1U low profile3 years warranty Fire emergency and evacuation system Public safety battery back-up Security systemUninterruptible DC-UPS system •Central monitoring system Industrial automation■Features■Applications(Note 6)UL62368-1IEC62368-1TPTC004AS/NZS62368.1LAD-600 series is a 600W economical AC/DC low profile security power supply with UPS function. Adopting the input range from 90Vac to 264Vac (115Vac/230Vac selectable by switch) and supports output 27.6V, 41.5V and 55.2Vdc. With high efficiency up to 91% and built-in AC, battery switch for easy maintenance. In addition, LAD-600 series not only provide TTL signals for AC OK, battery disconnect, battery reverse polarity (No damage), battery low detection, battery full and discharge, but also possess UART version so the users can monitor and control the status of the units, that enhance easy way for integration into security and fire systems directly.LAD-600seriesLAD-600series225mm4*M4 L=6150mm。

e n中对环境e n及振动冲击e n的满足Company number【1089WT-1898YT-1W8CB-9UUT-92108】国际铁路电源标准铁路上应用的电器和电子设备，在国际上都有非常严格的规管。

在欧洲，最常用的是 IEC571 "铁路车辆上电子设备" 标准。

现时称为 EN50155 – "机车车辆用的电子设备" 标准；而在英国，则需用 RIA12。

这两个标准在很多方面很相似的，而 RIA12 标准要求有专门对抗浪涌的能力。

它们规范的范围包括：输入电压范围标称输入电压输入范围瞬变（VN ）（VN）–（VN）下限（）（VN）24V17 – 30V14V36V25 – 45V22V48V34 – 60V29V72V50 – 90V43V96V67 – 120V58V电源中断及更替过程–输入电压中断在 10ms 内不应造成设备故障（级别 S2）–设备应要在电源更替过程中断 30ms 内满意地运作（级别 S4）操作温度范围操作温度级别车厢室内温度车厢室内过温（10分钟）电路板环境温度T1-25 /+55°C+15°C-25 / +70°CT2-40 /+55°C+15°C-40 / +70°CT3-25 /+70°C+15°C-25 / +85°CTX-40 /+70°C+15°C-40 / +85°C冲击及震动– EN 50155，IEC 571频率范围：5 至 150Hz交岔频率：位移幅度：7.5mm（小于交岔频率）加速度：20m/s2冲击：50m/s2半正弦波，50ms瞬变及浪涌RIA 12 规定设备必须能承受大于正常电压倍的过压浪涌，浪涌持续时间标明是 20ms，源阻抗是。

标出过压浪涌是正常输入电压之倍，每个输入电压的最大输入浪涌是：VN (VN)——————————24V84V 36V126V 48V168V 72V252V 96V336V 110V385V铁标与欧盟标准的比较表（1）：主要的电气标准欧盟标准 EN 或 IEC对应的中国铁标 TB/TEN50155 / IEC60571:1998TB/T3021-2001 铁道机车车辆电子装置EN50155:2001 / IEC61373:1999TB/T3058-2002 铁路应用 - 机车车辆设备、冲击和振动试験（与 IEC61373:1999 相同）EN50121-3-2:2000TB/T3034-2002 机车车辆电气设备电磁兼容性、试験及其限值注：TB/T 通常依据 EN/IEC 标准或把部份标准与 TB/T 整合。