RMPA29200中文资料

RJ-45 Pin AssignmentRefer to the CD-ROM for more detailed cabling information.What Next?At this point the hardware installation for your AccelePort Xr 920 hostadapter is complete. However, since the adapter must have softwaredownloaded to its RAM before it becomes functional, you must nextinstall the software drivers for your operating system.•Read the instruction booklet for the CD-ROM that came with youradapter for instructions on installing software.•View the on-line documentation on the CD-ROM for more informa-tion about AccelePort products.The Digi logo and AccelePort are registered trademarks of Digi International. Xr 920,4r 920, and 8r 920 are trademarks of Digi International.All other brand and product names are trademarks of their respective holders.© Digi International Inc., 1998All Rights ReservedInformation in this document is subject to change without notice and does not represent acommitment on the part of Digi International.Digi provides this document “as is”, without warranty of any kind, either expressed orimplied, including, but not limited to, the implied warranties of fitness or merchantabilityfor a particular purpose. Digi may make improvements and/or changes in this manual or inthe product(s) and/or the program(s) described in this manual at any time.This product could include technical inaccuracies or typographical errors. Changes are peri-odically made to the information herein; these changes may be incorporated in new editionsof the publication.AccelePort Xr 920 Family:4r 920 and 8r 920ISA Host AdaptersEIA-232HardwareInstallation Guide IntroductionAn AccelePort® Xr 920™ host adapter easily expands the number of EIA-232 ports available on your computer, allowing you to cable addi-tional peripheral devices, such as modems, terminals or serial printers, directly to your computer.As shown in the figure below, an Xr 920 host adapter has one connector to which a special Digi connector assembly is attached to provide the peripheral port connections. There are three different connector assembly options available from Digi to use with an Xr 920 host adapter: an RJ-45 Connector Box, a DB-25 Connector Box, or a DB-25 Cable Assembly.Figure 17. Example 4r 920 host adapter with connector assemblies This installation guide describes how to plan your setup and install AccelePort Xr 920 host adapter hardware.Signal Description PinRI Ring Indicator1DSR Data Set Ready 2 †RTS Request T o Send3GND Chassis Ground4TxD T ransmitted Data5RxD Received Data6SG Signal Ground7CTS Clear T o Send8DTR Data T erminal Ready9DCD Data Carrier Detect10† Pin 2 can be configured for DCD (through Digisoftware) if you want to connect using an 8 pinconnector91000736 AStep One: Plan your setupAn AccelePort Xr 920 adapter can be set up in a variety of ways. Before you start your installation, be sure of the following:Number of components. You can connect up to four peripherals to an AccelePort 4r 920 and up to eight peripherals to an AccelePort 8r 920 host adapter.Location of components. You can locate peripherals a distance from the adapter, but you must be sure that the cables you use to make the connection are properly constructed. To achieve the greatest reliabil-ity over distance, cables should be:•Shielded, low capacitance, and preferably designed specifically for serial data transmission.•Grounded at both ends of the cable.•Routed away from noise sources such as generators, motors and fluorescent lights.Cable Connections. Before beginning the installation, be sure that you have one of the Digi connector assemblies illustrated in Figure 1. You will also need a cable for each peripheral that you will be attaching to the connector assembly. The connector type that you need at either end of the peripheral cable depends on the type of Digi connector assembly that you use and the connector on the peripheral.Digi connector assemblies are available with RJ-45 or DB-25 connec-tors. You will need to be sure that you have cables of the correctlength and with the right connectors to properly attach the devices you want to use.Additional information about the AccelePort 4r 920 and 8r 920, such as specifications and cabling details, is provided on the CD-ROM that is packaged with the host adapter.Step Two: Install the Xr 920 ISA host adapterBefore installing the Xr 920 host adapter, you should do the following:•Check system resources for a free I/O port address. The Xr 920adapter uses four bytes of address space on the I/O bus of the com-puter into which you are installing it.•Wear an ESD wrist strap to ground yourself while handling theadapter. If one is not available, discharge static electricity from yourbody by touching an unpainted metal surface, such as the computer’schassis, prior to handling the adapter.•Record the adapter serial number, which will enable Digi to provideyou with better service, should the need arise. The serial number labelhas this general format: S/N: (S) XXX XXXXX•Unplug power from the PC.Figure 18. Xr 920 ISA host adapter1.Set the I/O port address of the adapter to one of the followingaddresses using the DIP switch at the location indicated in Figure 18:2.Remove the computer’s cover.3.Locate an available ISA slot in your computer and remove the slotplate.4.Insert the adapter into the slot and screw the endplate to the computerchassis. The endplate must be screwed into the computer chassis toremain in compliance with Part 15 of FCC rules.5.Replace the computer’s cover.6.Attach the 78-pin end of a Digi connector assembly to the connectoron the adapter.Step Three: Install peripheral cablingYou can connect modems, terminals, serial printers (or any other standardEIA-232 device to be controlled by applications on the computer) to anAccelePort Xr 920 host adapter by installing a cable between the periph-eral and the Digi connector assembly.On the peripheral end of the cable, the connector you use depends on therequirements of the peripheral. The Digi end of the cable must fit eitheran RJ-45 or DB-25 connector, depending on the Digi connector assemblyyou have.The pin assignments for each type of connector used on the connectorassemblies are as follows:DB-25 Pin AssignmentsI/Oaddress1234104-107h up up down down114-117h up down up down124-127h up down down down204-207h down up up down224-227h down up down down304-307h down down up down324-327h down down downdownSignal Description PinGND Chassis Ground1*TxD T ransmitted Data2RxD Received Data3RTS Request T o Send4CTS Clear T o Send5DSR Data Set Ready6SG Signal Ground7DCD Data Carrier Detect8DTR Data T erminal Ready20RI Ring Indicator22* Chassis Ground is also available on theconnector shell。

Flooring Stapler GunModel No.:RP9800INSTRUCTION MANUALIMPORTANT:Upon receipt of the product, readand follow all safety rules, operating instructions before first use it. And retain this manual for future reference.Contain:◎ Technical Data◎ Important Safety Rules ◎ Operating Instruction ◎ Maintenance◎ Troubleshooting ◎ Parts List※ Technical DataNail Capacity …………… ………………………………..…….……60pcsNail length…………………………………………….……..…… 37.5-50mm(1-1/2”-2”) Crown ……………………………………………………………12.7mm (1/2’’) Fastener size……………………………..…………………….….Ф1.9X1.6mm Operation pressure…………………………………………………60-100PSI (4-7bar) Max.Pressure………………………………………………………8.3bar (120 PSI) Air Consumption…………………………………………………..0.3 L per fire Air i Dim Weignlet…………………………………………………..………..1/4”N.P.T.ension……………………………………………..…………..80X432X540mm ht………………………………………………..……..……..5.1kgs※ Important Safety Rules1. KEEP CHILDREN AWAY. All children should be kept away from the work area. Don’tlet them handle the tool. Fig 1.Pneumatic Flooring Gun shall only be used by persons above 18 years old. Permit only experienced and trained persons to operate pneumatic tools. 2. USE SAFETY GOGGLE AND EAR PROTECTION: Air tool operators and othersin work area should always wear safety glass to prevent the injury from fastenersand flying debris when loading and unloading this tool. Maybe the noise would harm your hearing, wear the ear protection to safeguard. (See fig 1.)Fig 2.3. NEVER USE OXYGEN, COMBUSTIBLE OR ANY OTHER BOTTLE GAS as a power source or wouldcause explosion and serious personal injury. (See fig 2.)4. DO NOT CONNECT TOOL TO COMPRESSED AIR which pressure exceeds120psi.5. DO NOT PLACE OVER-LONG AIR HOSE in working area in case of theoperator’s unexpected tripping .Make sure all connections are tight, the hose should be near to air supply .Fig 36. CARRING TOOL ONLY BY THE HANDLE. do not keep the trigger pull on safety yoke mechanism to avoid unintentional firing of fastener.7. KEEP THE TOOL POINTED AWAY FROM YOURSELF and others at all time and keep hands, any body parts away rear area to Safety guard against possible injury. 8. DISCONNECT TOOL FROM AIR SUPPLY BEFORE LOADING fasteners toprevent a fastener from being fired during connection. (See fig3.)9. DO NOT KEEP THE TIRGGER OR SAFETY DEPRESSED during loading fastenersor the unintentional firing of a fastener would cause personal injury.10.DISCONNECT TOOL FROM AIR SUPPLY HOSE and close the compressor before performingmaintenance, alter the accessories or during non-operation.11.DO NOT DRIVE FASTENER ON SCAFFOLDINGS,LADDERS and on such similarly construction, notworking on airtight case, and vehicles. Don’t over reach, keep proper footing at all times to ensure correct balance.12.DO NOT DRIVE FASTENERS CLOSE TO THE EDGE OF THE WORK PIECE.The workpiece would split allowing fastener to fly free or ricochet causing personal injury.13. DO NOT DRIVE FASTENER ON TOP OF NAILED FASTENER, or the fastener can ricochet causingpersonal injury.14.NEVER USE A TOOL that is leaking air, had missing or damaged parts or requires repair and make sure all the screws and securely tightened.15.MAKE DAILY INSPECTION FOR FREE MOVEMENT of trigger, safety mechanism and spring to insurethe tool can operate well.16.ONLY USE PARTS AND ACCESSORIES recommend by manufacturer.17.Clean work area Accidents occur where benches and work areas are cluttered or dirty, floors must be keptclear.18.Make sure only use correct staplers as specified for your tool.(See Fastener specification)※Operating instructionDescriptionModel RP9800 drives staples from 1-1/2’’ to 2’’ length. Crown 1/2’’ , Die cast aluminum body provide more power to easily drive staples into hard wood., Comfortable handle for improving control and comfort even during extended use. Better balance for stability , ergonomic design with longer handle for ease of operator ,hardened driver blade for longer life ,composite base to eliminate scratch and damage to the surface of the wood ,non-marring base is designed to allow driving of fastener close to floor ,. Economical air consumption with low noise. It is ideal for construction , flooring. .WARNINGNever free-fire the tool at high pressure.Air systeme clean, Dry and Regulated compressed air at 4-7 bar (60-100psi)2.Never exceed maximum and minimum pressure. Too low or too high pressure would cause noise, fast-worn ormisfiring.3.When connecting air supply always keep hands and body from discharge area of tool.4. A filter-regulator-lubrication is required and should be located as close to tool as possible. (see Fig.4)5.Keep air filter clean. A dirty filter will reduce the air pressure to the tool causing a reduction in power andefficiency.6.For better performance, install a quick connector in your tool and quick coupler on the hose if possible.7.Be sure all connections in air supply system are sealed to prevent air loss.Loading fastener and operation)WARNING:Always disconnect the tool from the compressed air before loading. When loading the tool always point the tool away from yourself and others. Make sure that you are not holding the tool with trigger depressed while loading the tool.1.Disconnect the tool from the air supply .Grasp the nailer firmly with one hand. Press the latch with yourthumb and pull the magazine back. Insert a strip of fasteners into magazine Keeping it point down.2.Release the latch and pusher, slid the pusher against the nails until it contacts the nails and lock into place.The tool is now ready for use.3.Connect the tool to the air supply. Make sure the air pressure is in the correct range denoted in the TechnicalData.4.Then test the driving depth in a sample piece of wood before using. If the fasteners are being driven too far ornot far enough, adjust the regulator to provide less air pressure or more air pressure.)WARNING:Never operate tool unless safety nose is contact with workpiece. Do not operate tool without fasteners or damage to tool may result.Never fire fasteners into air because fasteners may injury operator or others and damage to tool may result.※ Maintenance)WARNING:Disconnect the tool from the air compressor before adjusting, clearing jams, servicing & maintenance, relocating and during non operation.·Regular lubrication, if your tool without using the in-liner automatic oilier, place 2 or 6 drops of pneumatic tool oil into the air inlet before each work day or after 2 hours of continuous use depending on the characteristic of workpiece or type of fasteners.·Air-operated tools must be inspected periodically, and worn or broken parts must be replaced to keep the tool operating safely and efficiently. Check and change all worn or damaged O-rings, seals, etc. Tight all the screws and caps in case personal injury.·Make regular inspection for free movement of Sp ring and safety mechanism to assure safesystem is complete and functional: no loose and missing parts, no building or sticking parts.·Keep magazine and nose of tool clean and free of any dirt lint or abrasive particles.·When temperatures are below freezing, tools should be kept warm by any convenient, safe method.※TroubleshootingThe following form lists the common operating system with problem and solutions. Please read the form carefully and follow it.If any of the following symptoms appears during your operating, stop using the tool immediately, or serious personal injury could result. Only a qualified persons or an authorized service center can perform repairs or replacement of tool.Disconnect tool from air supply before attempting repair or adjustment. When replacing O-rings or Cylinder, lubricate with air tool oil before assembly.SYMPTOM PROBLEM SOLUTIONSAir leak near top of tool or in trigger area 1.O-ring in trigger valve are damage.2.Trigger valve head are damage.3.Trigger valve stem ,seal or O-ring aredamaged.1.Check and replace O-ring.2.Check and replace.3.Check and replace trigger valve stem,seal or O-ringAir leak near bottom of tool. 1. Loose screws.2. Worn or damaged O-rings or bumper. 1.Tighten screws.2.Check and replace O-rings or bumper.Air leak between body and cylinder cap. 1. Loose screws.2. Worn or damaged O-rings or seals.1.Tighten screw.2.Check and replace O-rings or bumper.Blade driving fastener too deep. 1. Worn bumper.2. Air pressure is too high.1.Replace bumper.2.Adjust the air pressure.Tool does not operate well: can not drive fastener or operate sluggishly. 1. Inadequate air supply.2. Inadequate lubrication.3. Worn or damaged O-rings or seals.4.Exhaust port in cylinder head isblocked.1.Verify adequate air supply.2.Place 2 or 6 drops of oil into air inlet.3.Check and replace O-rings or seal.4.Replace damaged internal parts.Tool skips fasteners. 1.Worn bumper or damaged spring.2.Dirt in front plate.3.Dirt or damage prevents fasteners frommoving freely in magazine.4.Worn or dry O-ring on piston or lack oflubrication.5.Cylinder cover seal leaking. 1.Repalce bumper or pusher spring.2.Clean drive channel on front plate.3.Magazine needs to be cleaned.4.O-ring need to be replaced.And lubricate.5.Replace Sealing washer.Tool jams. 1.Incorrect or damaged fasteners.2.Damaged or worn driver guide.3.Magazine or nose screw loose.4.Magazine is dirty. 1.Change and use correct fastener.2.Check and replace the driver.3.Tighten the magazine.4.Clean the magazine.※RP9800 PARTS LISTNote:if you need spare parts of this model, pls feel free to contact us or the distributor where you bought this tool. Tks!。

FSR-9200大容量高速开关控制器技术及使用说明书安徽尚途电力保护设备有限公司2017年6月出厂默认设定：装置工作电源AC/DC85～265V开关量输入电源AC/DC220VDC110V（订货时注明）CT额定值AC5A（自适应1A制CT）PT额定值AC100V密码设定0000目录第一章概述 (1)1.1产品适用范围 (1)1.2产品特点 (1)第二章主要参数和技术指标 (2)2.1技术参数 (2)2.2正常工作大气参数 (3)2.3绝缘性能 (3)2.4电磁兼容 (3)2.5机械性能 (4)2.6实施标准 (4)第三章装置外观及安装 (5)3.1产品外观示意图 (5)3.2外形尺寸图（单位：MM） (5)3.3开孔安装尺寸图（单位：MM） (6)第四章主要功能 (7)4.1保护功能 (7)4.2定值及压板说明 (11)4.3背板端子定义图 (13)第五章操作使用说明 (14)5.1信号灯说明 (14)5.2按键说明 (14)5.3液晶显示说明 (15)5.3.1正常运行显示 (15)5.3.2动作报告显示 (15)5.4菜单使用说明 (16)5.4.1刻度显示 (16)5.4.2开入显示 (17)5.4.3开出检测 (18)5.4.4保护定值 (18)5.4.6压板设置 (20)5.4.5参数设置 (20)5.4.8版本信息 (23)第一章概述1.1产品适用范围FSR-9200大容量高速开关控制器适用于工业和民用35kV及以下电压等级的配电系统的线路（包含母联及备自投保护）、厂用变及站用变、并联电容器、电动机、PT及其并列的保护、测量、控制和管理，实现配电系统的无人值守和智能管理。

1.2产品特点n采用32位处理器，16位AD采样，主要元件全部采用进口器件，保证了装置电气设计上的高可靠性，产品通过了严格的型式试验和电磁兼容测试，保证了产品在恶劣环境下的适应能力和可靠性。

n针对35kV及以下配电系统馈线而设计。

RMP420-Remote MultipurposeInput/OutputRPM420 is a multipurpose I/O module for use in Alarm monitoring andIntegrated Control Systems. RMP420 is designed for 32 field input channelsin single topologies. Its interface towards the host control computer (RCU) isprovided by redundant I/O bus.The module is approved for Ex Zone 2 applications.Functions• 32 software configurable multipurpose solid-state channels.• Analog and Digital Input and Output (AI, AO, DI and DO).• 2 or 3 wire Resistance Temperature Detector (RTD).• 2 channels can be configured as pulse/frequency/encoder input.• Short-circuit protected I/O loop power output.• Dual Remote I/O process BUS interface for redundant communication withhost computer(s).• Communication ports galvanically insulated from other module circuitry.• Loop monitoring (per channel).312743/CKongsberg Maritime AS P.O. Box 483, NO-3001 Kongsberg, Norway Switchboard_ +47 815 73 700Global support 24/7: +47 33 03 24 07E-mailsales:*********************.com E-mailsupport:************************TECHNICAL DATAKM Article number RMP420: 306712ElectricalInput supply voltage:24 VDC (18-31.2 V)Power consumption:• Power: 10 W Typical• Loop power:Configuration dependable Power connectors:• Screw terminals• Cable cross-section:2.5 mm2• Max. torque 0.4-0.5 Nm RBUS interfaceRBUS connectors:2x9 pin male D-Sub,RS485, galvanic isolated Input/outputNo. of I/O channels:32I/O configuration:Multipurpose. Channelsare individuallyconfiguredDigital Input (DI)Loop voltage:Input supply voltage Input loop current:Max. 4 mA @ 24 VDC loopvoltageChannel "Off" current:<0.5 mAChannel "On" current:>3 mAMax input voltage:Input supply voltage Max. input signal freq.:10 ms pulseCompliance:Namur compliant, PNP/NPNcompliantDigital Output (DO)Loop voltage:Input supply voltage Loop driver device:Short Circuit Proof HighSide DriverLoop driver trip current:approx. 1.4 A @ 20˚C(reset by command)Loop driver "Off" leakage:Max. 0.1 mA @ 24 VDCinput supply voltage Loop monitoring current:Max. 2 mA @ 24 VDC inputsupply voltageAnalog Input (AI)Voltage input range:0-4 V, 0-10 VInput resistor to ground: 3 MΩCurrent input range:0-20 mAAutomatic protection:26 mAInput resistor to ground:150 Ω ±1 %Measurement accuracy:±0.15% of full scalePT100 interfaceTemp. range:-200 to 600˚C Resolution:±0.5˚CAccuracy:±0.4% of full scale Temperature drift:±50 ppm/˚CMax. wire resistance:25 ohm/wireResponse time1000 ms Analaog Output (AO)Voltage output range:0-10 V ±0.5% (internalresistance: 1 kohm) Current output range:0-20 mAMinimumlocal resistance:500 ohmMeasurement accuracy:±0.35% of full scale Pulse/Frequency interfaceMax. input range:Pulse count freq.:10 kHzEncoder count Up/Down:2.5 kHz rev. (4 counts/revolution)Duty cycle:Pulse width: min. 11µ @10 kHz rangePulse lever transmission:Namur: 1on >2.1 mA, 1off<1.2 mA. Rin <2.2 kohm,1max = 3 mA,Current:1ohm >9 mA, 1off <7 mA,Rin <1 kohm, 1max = 13 mA Accuracy (oscillator):100 ppm over the wholetemp. range (-15 to+70˚C) 25 ppm typical @2˚CFail safeHW Fail safe:Min. 65 msInternal Test Error:Instantly setSoft Fail safe (downcounter):100 ms - 65 sec. (6 sec.default)Compliance• IACS E10• IEC 60945• IEC 60355• IEC/EN60079-0,-7Type approval Presafe 18ATEX12094X(II 3G Ex ec IIC T4 Gc) Environmental specificationsAmbient temp. and humidity:Temp. operation:-15˚C to +70˚CTemp. storage:-25˚C to +70˚CHumidity operation:Up to 98% RHHumidity storage:Up to 98% RHProtection standards:IP 20 (IEC 60529) MechanicalHxWxD:355x158x87 mmWeight: 1.35 kgDIN rail verticalmounted:35 7.5/15Life cycle predictionPredicted failure rate @GB 25˚C (60% confident,based on chip suppliersdata):38.5 yearsPredicted failure rate @NS 35˚C (Environmentalderating based on RomeLaboratory toolkit):10.4 years。

1 AT91RM9200简介AT91RM9200是Atmel公司基于ARM920T核的高性能、低功耗16／32位RISC(精简指令集计算机)微处理器，内部集成丰富的外设资源，适用于要求外设资源丰富、功耗低、工作严格稳定的工业控制等方面，如嵌入式工业控制、医疗设备、网络通信、移动计算等。

AT91RM9200微处理器最高主频为180 MHz，其双向、32位外部数据总线支持8位、16位、32位数据宽度，26位地址总线可以对最大64 MB空间寻址。

AT91RM9200片内集成了非常丰富的外围功能模块，包括全功能MMU虚拟内存管理单元、内部16 kBSRAM和128 kB ROM、EBI接口控制器、增强的时钟和PMC(电源管理控制器)，带有2个PLL(锁相坏)的片内振荡器，4个可编程的外部时钟信号，包括定时中断、看门狗、秒计数器的系统定时器，带报警中断的实时时钟，带有8级优先级、可单个屏蔽中断源的AIC(先进中断控制器)，7个外部中断源和1个快速中断源，4个32位的IO控制器，20通道外围数据控制器(PDC或DMA)，1个10 Mbit·s-1／100 Mbit·s-1以太网控制器，1个USB 2.0主机接口，1个USB 2.0设备接口，2个多媒体卡接口，3个SSC(同步串行口控制器)(兼容IIS)，4个UASRT(通用同步／异步串行口)，1个主／从SPI(串行设备接口)，1个两线串行接口TWI(主模式)，JTAG／ICE接口等。

2 硬件设计最小系统是保证微处理器可靠工作所必须的基本电路。

基于AT91RM9200微处理器的最小嵌入式系统由微处理器AT91RM9200、电源电路、晶体振荡器电路、复位电路、JTAG接口、存储器模块、串行调试接口等电路组成，其原理框图如图1所示。

2.1 电源电路在系统中，AT91RM9200需要1.8 V和3.3 V电源，另外，大部分外围器件需要3.3 V电源，小部分外围器件还需要5 V电源，为了简化系统电源电路的设计，假设系统的输入电压为5 V直流稳压电源。

TOPRA AD920五色印刷开槽模切堆叠机功能介绍整机性能•电脑控制可储存常用订单，换单更快，操作更方便。

•特别增设电脑远程维护，快速解决设备故障，提高维修效率，降低维修成本。

•所有传动辊为优质钢，镀硬铬，表面研磨。

•墙板为优质钢，经过去内应力处理后再经过CNC加工中心加工。

•喷漆工艺：零件在喷漆前，经过去锈－磷化－喷漆－烤漆，可以使油漆起到防锈、表面硬，油漆更耐用。

•整机附警铃；行走时持续响铃警示，确保操作人员安全。

•各单元内设置急停开关，可由内部停止各单元移动，确保内部操作人员的安全。

•整机线架槽下方安装有大屏幕数显表，显示整机印刷速度（按张/小时显示），便于操作人员在机器不同方向很容易看见机器的运转速度。

•润滑机油自动平衡装置，以保持各单元润滑机油在同一个水平线上。

•电脑控制系统中可储存订单数量能达到999条。

1. 送纸单元（壹组）1.1 前缘滚轮送纸系统（SUN公司技术及配件）1.1.1 由SUN提供目前最先进的EXTEND-O-FEED系统，操作简单，精确度高。

1.1.2 三轴前缘送纸，加大风机流量，使高速低速送纸更准确。

1.1.3 手动调整送纸行程，减轻拉纸胶辊压力。

1.1.4 变频器调整风量，控制真空气流及压力，以配合纸板尺寸。

1.1.5 由前面定位，减少送纸误差，提高送纸及开槽精确度。

1.1.6 开高速时稳定，减少噪声及机械振动。

1.1.7 左右挡板位置采用电脑及电动数字控制。

1.1.8 后托纸板架电动控制前后，加快设置速度。

1.1.9 前挡纸板间隙手动调整。

1.1.10可连续或隔张送纸。

1.1.11供纸计数器，设定、显示生产数量。

1.2 吸尘系统1.2.1除尘装置，三排毛刷及风机清除纸板表面印刷面纸屑，提高印刷品质。

1.3 送纸上、下辊1.3.1 上辊：外径为φ169mm钢辊包胶。

1.3.2 下辊：外径为φ143mm钢辊表面冼直线，再镀硬铬。

1.3.3 送纸压力辊调整间隙采用自锁结构，调整范围0-12mm。

MC9200 Application GuideZebra Program PartnerApplicationPlatformDescriptionVerticalsProductg Status TinyTERM Enterprise for Android provides secure SSH and telnet access using exact terminal emulation for 21 terminalf ET1, MC9200,TC70C Zebra Enterprise NACentury Software TinyTERM Androidtypes, including IBM TN3270E, TN5250, VT420 and Wyse 50/60.Manufacturing, Retail, Transportation and Logistics MC40,TC55Enterprise ValidatedEducation, FederalAndroidSoftware to maximize productivity in real-time of mobile data-Government,Healthcare, Hospitality, Human Services,Manufacturing, Petrochemical, Public Safety, Retail,Transportation and Logistics MC3200,MC9200,TC70Zebra Enterprise NAConnect Inc CloudMaxAndroid, CESoftware to maximize productivity in real-time of mobile data-collections operations.Transportation and Logistics, Utilities, Wholesale Distribution TC70,WT4100p ValidatedSAP Work Manager (WM) is a comprehensive mobile application that allows remote workers to access, transfer, complete and manage their assigned work orders and service requests. SAP WM empowers technicians to work more efficiently and make better-informed decisions by giving them access to the relevant information they need at the point of performance. Whether within the four walls, on the plant floor, or out in the field with your customers, SAP Zebra NACrave InfoTech SAP Work Manager 6.2AndroidWM enables technicians to reference SAP ERP data such as task lists, safety details, repair histories and bills of materials.ManufacturingMC9200, TC70, TC75Zebra Enterprise ValidatedSAP Work Manager with Meter Management is a comprehensive mobile solution for the automation of field service processes. Regardless of connectivity, SAP Work Manager with Meter Management allows remote employees to access, complete, and manage their assigned Tasks and service requests via mobile devices. The Meter Management add-on component for Work Manager helps utility companies to integrate meter data management systems with SAP back-office applications. The solution is designed to connect customer usage data that had been collected from meters with billing, customer care, and otherg,, operational and business applications from SAP. It adds the following functionality to the core Work Manager Meter Management Application:• Reconnection/Disconnection•Move In/Move OutCrave InfoTech SAP Work Manager 6.2 with MeterMove In/Move Out• Replacement• Meter repair• Periodic Reading• Install Meters•Remove meters etcTC75,ZebraEnterpriseNA Crave InfoTech Management Android• Remove meters etc Utilities MC9200ValidatedNA EXA Systems inc EXA Smart CE Windows CE application for inventory and warehousemanagement.Manufacturing, WholesaleDistributionMC9100,MC9200,WAP4ZebraEnterpriseValidatedExpress client is a graphical-based client application thatworks with the MWA server for Oracle WMS and MSCA.Compared to its character-based telnet client, GUI clientprovides user interface that is more attractive and user Manufacturing, Retail,MC67,MC9200,ZebraEnterpriseNA Intellinum Express Client Android friendly. Furthermore, users will have quicker access to LOVand action buttons with the use of touch screen capability.Transportation and Logistics,Wholesale DistributionTC55, TC75,TC8000EnterpriseValidatedThe MSB App allows you to run mobile applications whichhave been created in the SAP ERP system using theMC9200Z bEMEA Mobisys GmbH MSB App Android have been created in the SAP ERP system using theMobisys Solution Builder add-on with the help of theMobisys Screen Designer and by means of ABAPprogramming.Manufacturing, Transportationand Logistics, UtilitiesTC55TC70TC75TC8000ZebraEnterpriseValidatedbarcode labeling capabilities. It integrates with Oracle® ERP and provides the ability to track trace and control the NATake Supply Chain Gemini SeriesWin Mobile and provides the ability to track, trace and control the inventory in real time. It expedites and extends data collection in key functions within receiving, inventory, manufacturing and shipping to accelerate data flow forbetter decision-making.Retail, Manufacturing MC9200ZebraEnterprise ValidatedEnterprise Browser is a powerful, next generation industrialbrowser enabling developers to build feature rich web applications that integrate seamlessly with the features in Zebra Technologies’Mobile computers and peripherals –Zebra Technologies Mobile computers and peripherals – such as barcode scanning, signature capture, printing and more. Enterprise Browser applications leverage standard web technologies (HTML5, CSS, and JavaScript) to run and integrate with virtually any Zebra devices. With support for legacy APIs used in PocketBrowser and RE Shared legacy APIs used in PocketBrowser and RE SharedRuntime, Enterprise Browser is the ideal path forward for developers migrating legacy web based applications tonewer devices or creating new highly-graphical applications. Enterprise Browser features will speed up your application d l t ti d i t d ki th t iti MC18development time, reducing costs and making the transition to next generation devices and operating systems fast, easy and affordable. Built from the ground up around best-in-class development practices and designed to support new operating systems and devices, Enterprise Browser is an MC18, MC3200, MC40, MC67, MC9200, Zebra Enterprise NAZebra Technologies Enterprise Browser Demo Androidentirely better way to create web based enterprise applications.Cross-Industry TC55, TC70, TC75Enterprise Validated DCIx integrates a complete chain of suppliers andcustomers, facilitates coordination and trade exchange among customers,suppliers and partners by employing MC3200,EMEAAIMTEC DCIx Androidamong customers, suppliers and partners by employing technologies of EDI, WebEDI, VMI.MC9200Cub Business SYstems AB CubLink ShopFlowA d id CubLink ShopFlow is a mobile, in-store logistic system to manage processes such as incoming and outgoingdeliveries, inventory, price change, order, label printing and shrinkage operations for retail chains R t ilEMEACub Business SYstems AB CubLink ShopFlow Android shrinkage operations for retail chains. Retail MC9200NA Genesta SyVox Client Android The SyVox Client, a user interface tool, delivers speechrecognition based applications in industrial environments.Manufacturing, Retail,Transportation and LogisticsMC40,MC9200 RF-SMART is a global leader in RF/mobile applications forInventory Management, Warehousing, Manufacturing, andRetail Our world class products integrate into ERP systemsNA ICS RF-SMART (TE MochaSoft)Android Retail. Our world-class products integrate into ERP systemssuch as JD Edwards, Dynamics AX, NetSuite, and OracleFusion ERP.MC9200 ITST Service Tool is a mobile solution to automate serviceLACR ITST - Services Team Consultoria ITST Service Tool Android orders of field teams in real time, from anywhere and, ifnecessary, running offline. The product allows you to controlthe technical activities, plan itineraries and scheduled tasks,besides being complementary to the SAP Standard.Manufacturing, Retail,Transportation and Logistics MC9200EMEA Keep IT Mobile KIM WMS Android The solution addresses logistics companies and provides aclear picture of the entire flow of goods in a warehouse.Manufacturing, Retail,Transportation and Logistics MC9200 ACS is a comprehensive asset tracking software andFederal Government,HealthcareNA Lowry Solutions Asset Control System (ACS)Android ACS is a comprehensive asset tracking software andhardware scalable solution suite, makes tracking your assetinventory easy whether you are a small company, a globalenterprise, or somewhere in between.Healthcare,Manufacturing, Retail,Transportation and Logistics,UtilitiesMC40,MC9200NA Quest Solution Order Entry Android QuestSolution Order Entry running on a portable device canend the “blind order” aspect of current systems by providingthe much needed information to the mobile worker.Human ServicesTC70,MC9200HealthcareManufacturingLACR TRANSMIT DATA TERMINAL DEMEXICO S.A. DE C.V.Sistema Universal de Inventarios(SUI)AndroidWarehouse inventory system designed to fit with almost anywarehouse with minimal requirement.gRetailTransportation and Logistics MC9200This application enables management centres andcustomers to track each step of the cargo carrying process.Life cycle of the delivery package is secure and fully TC55EMEA Trinoks Yazılım Donanım A.ŞYurtiçi Kargo POC Application Android Life cycle of the delivery package is secure and fullycontrolled by the system until it is received.Transportation and LogisticsTC55,MC9200。

HT9200A/BDTMF GeneratorsSelection TableBlock DiagramFeatures•Operating voltage: 2.0V~5.5V •Serial mode for the HT9200A•Serial/parallel mode for the HT9200B •Low standby current•Low total harmonic distortion• 3.58MHz crystal or ceramic resonatorGeneral DescriptionThe HT9200A/B tone generators are designed for µC interfaces. They can be instructed by a µC to generate 16 dual tones and 8 single tones from the DTMF pin. The HT9200A provides a serial mode whereas the HT9200B contains aselectable serial/parallel mode interface for various applications such as security systems,home automation, remote control through tele-phone lines, communication systems, etc.Pin AssignmentPad Assignment Pad CoordinatesUnit: µmChip size: 1460 × 1470 (µm)2* The IC substrate should be connected to VSS in the PCB layout artwork.Pin DescriptionHT9200A/B221st Aug ’98Approximate internal connection circuitsAbsolute Maximum Ratings*Supply Voltage.................................–0.3V to 6V Storage Temperature.................–50°C to 125°C Input Voltage....................V SS–0.3 to V DD+0.3V Operating Temperature...............–20°C to 75°C*Note: These are stress ratings only. Stresses exceeding the range specified under “Absolute Maxi-mum Ratings” may cause substantial damage to the device. Functional operation of this device at other conditions beyond those listed in the specification is not implied and prolonged exposure to extreme conditions may affect device reliability.Electrical Characteristics Ta=25°C421st Aug ’98*Notes: The codes not listed in Table 1 are not used D4 is MSBFunctional DescriptionThe HT9200A/B are DTMF generators for µC interfaces. They are controlled by a µC in the serial mode or the parallel mode (for the HT9200B only).Serial mode (HT9200A/B)The HT9200A/B employ a data input, a 5-bit code, and a synchronous clock to transmit aDTMF signal. Every digit of a phone number to be transmitted is selected by a series of inputs which consist of 5-bit data. Of the 5 bits, the D0(LSB) is the first received bit. The HT9200A/B will latch data on the falling edge of the clock (CLK pin). The relationship between the digital codes and the tone output frequency is shown in Table 1. As for the control timing diagram, refer to Figure 1.521st Aug ’98When the system is operating in the serial mode a pull-high resistor is attached to D0~D3 (for parallel mode) on the input terminal.For the HT9200B, the S/P pin has to be connected low for serial mode operation.Parallel mode ( HT9200B)The HT9200B provides four data inputs D0~D3to generate their corresponding DTMF signals.parallel operation mode. Then the input data codes should be determined. Finally connected low to transmit the DTMF signal from the DTMF pin.The T DE time (about 6ms) will be delayed from the CE falling edge to the DTMF signal output.The relationship between the digital codes and the tone output frequency is illustrated in Table 2.As for the control timing diagram, see Figure 2.When the system is operating in the parallel mode, D0~D3 are all in the floating state. Thus,these data input pins should not float.% Error does not contain the crystal frequency driftApplication Circuits Serial modeSerial/parallel modeHT9200A/B821st Aug ’98。

----------------------------------------------------------------------------------------------------------------------------------------------------------------------波尔高压电源（宿迁）有限公司英国真维特（Genvolt ）高压设备有限公司生产基地：江苏省宿迁市宿豫经济开发区庐山路60号总部地址：New Road,Highley,Bridgnorth,电话：0527-88068878传真：0527-88068028（研发中心）Shropshire,United Kingdom WV166NN波尔高压2kW4U 机箱高精密高压电源LAS 系列2kW 精密高压电源，是波尔高压研制的新一代机箱式电源。

2kW 一体式4U 标准机箱，输出电压范围从1kV 到100kV 共有18种标准规格，可根据特殊订单定制特殊规格的电压电流。

通过前面板可以进行本地控制，控制本地电压电流。

通过后面板一体化25芯插座，可以实现全面的远程控制，包括模拟控制及RS232远程控制。

◆典型应用离子束注入半导体工艺电子束焊接电容充电高功率射频发射器静电除尘器X 射线系统◆2kW 一体式4U 机箱◆输出电压从1kV 到100kV◆本地和远程模拟及远程通讯接口◆拉弧和短路保护◆电压与电流，精度0.1%◆可根据用户要求定制----------------------------------------------------------------------------------------------------------------------------------------------------------------------波尔高压电源（宿迁）有限公司英国真维特（Genvolt ）高压设备有限公司生产基地：江苏省宿迁市宿豫经济开发区庐山路60号总部地址：New Road,Highley,Bridgnorth,电话：0527-88068878传真：0527-88068028（研发中心）Shropshire,United Kingdom WV166NNLAS 选型表kVmAP(kW)型号kVmA P(kW)型号120002LAS-N2kW-1kV 151332LAS-N2kW-15kV 210002LAS-N2kW-2kV 201002LAS-N2kW-20kV 3666.62LAS-N2kW-3kV 3066.62LAS-N2kW-30kV 45002LAS-N2kW-4kV 40502LAS-N2kW-40kV 54002LAS-N2kW-5kV 50402LAS-N2kW-50kV 63332LAS-N2kW-6kV 60342LAS-N2kW-60kV 82502LAS-N2kW-8kV 7028.52LAS-N2kW-70kV 102002LAS-N2kW-10kV 80252LAS-N2kW-80kV 121662LAS-N2kW-12kV100202LAS-N2kW-100kV注：N 为正极性，P 为负极性LAS 选型示例技术规格输入电压：标准：220VAC ，单相，功率因数0.99（满载）。

哈希9200氧表说明书
尺寸
11.4×44.8cm
重量
3.54kg，含电池
外壳材料
pVC
外壳防护等级
NEMA6P
操作温度范围
-18~一60℃
存储温度范围
-40~60℃
电源
1个劲量EN-529，碱性电池，6V
电池寿命
温度为10℃时，通常可以使用60天，每15分钟记录一次数据，一个液位和-个速度，每周下载一次数据。

（也会受到现场环境的影响）
用户界面
计算机界面
监测间隔
1，2，3，5，6，10，12，15，20，30，60分钟
程序内存
永久性的、可编程的闪存，可通过RS232端口进行更新
时基准确度
每天±1秒钟
测量单位
液位：英寸、米、厘米、英尺
流量：gps，gpm，gph，lps，lph，lpm，mgd，afd，cfs，cfm，cfh，cfd，m's，m'm，m'h，m'd总流量：加仑、立方英尺、升、立方米
数据存储
能力：每15分钟记录一次液位数据和一次速度数据，可以存储90天的数据数据类型：液位和速度
存储模式：Wrap或slate。

RAM内存：128K
通讯
使用HACH分析软件，串行连接到IBM兼容的计算机上
速度测量准确度
方法：超声波多普勒方法换能器类型：1MHz压电晶体测量速度时的最小深度：2cm量程：-1.52～6.10m/s
零点稳定性：0.015m/s准确度：读数的士2%操作温度：-18~60℃。

夏米尔慢走丝290500操作说明书范文1.目的为正确操作线切割设备以维持线切割设备之精度及稳定性,延长其使用寿命,使线切割加工作业规范.标准化,而达到提升质量保证,提升加工效率的目的,以满足客户需求.2.适用范围适合于ROBOFIL290.ROBOFIL500型号之慢走丝.3.作业内容3.1开机当电柜合闸通电的时候,数控恢复断电前的状态.如果想装软件,必须启动特别的启动屏幕,步骤如下:3.1.1按通电开关.3.1.2同时,按住控制板上任何一个键,直到显示启动屏幕.3.1.2.1监控功能(MONITOR)是保留给CT维修服务人员的.3.1.2.2装入功能(LOAD)用来装软件模块:系统.自诊断.3.1.2.3初始化功能(INITALIZE)数控返回到初始状态(相当于装入软件的状态).3.1.2.4继续功能(CONTINUE)用于退出特别启动屏幕,进入正常操作(象上面的操作一样,激活最后一个屏幕).3.2安装软件3.2.1系统软件一旦初始化菜单被激活,接着:某把系统盘(磁盘A)插入驱动器A某选择LOAD(F2)在装软件期间,磁盘驱动器二极管和屏幕右一指灯亮,数控显示装入过程的信息.装入结束后,NC在E某E方式下,以便执行装入下列文件的操作.(语言,CT-E某PERT.CAM-CT)3.2.2.装入系统软件后,显示语言配置菜单:某指明所需要的语言名,用RETURN确认某根据指示插入所选择的语言盘某按F1(寻找)输入必须的文件,设备即按所选语言配置.3.3屏幕组织某准备模式(PREPARATION)符号:PREP背景色:绿色某执行模式(E某ECTION)符号:E某E背景色:紫色某信息模式(INFORMATION)符号:INFO背景色:蓝色某图形模式(GRAPIC)符号:GRAPH背景色:橙色3.3.1PREP准备方式3.3.1.1编辑器(EDITOR)该功能用来建立或修改ISO程序,控制程序PROFIL程序1):寻找文本(FIND.TE某T)2):寻找下一个(FINDNE某T)3):块(BLOCK)4):标记范围开始(MARKSTART>标记范围结束(MARKEND)5):保存文件(SAVEFILE)6):退出(E某IT)3.3.1.2CAM-CT某准备ISO零件程序需要交替运用菜单功能与绘图功能.<此单节介绍略>3.3.1.3专家系统(CT-E某PERT)某这些程序可以手工或者由CT-E某PERT专家系统自动生成.某与不使用CT-E某PERT专家系统相比,CT-E某PERT生成的TEC文件是分完整的.用一个TEC文件,一个ISO文件和一个命令文件就可能执行个加工操作.相反,当一个文件在CT-E某PERT中查询或者修改时,必须3.3.1.4文件(FILES)某本功能用于处理存储在(所用的)不同单元上的所有文件(选择一个单示其下的文件目录).某可以对给定目录中的文件操作,或者从一个目录转到另一个目录.1):拷贝(COPY)2):删除(DELETE)3):改变名称(RENAME)4):显示(DESPLAY)5):打印(PRINT)6):转换单元(CHANGEUNIT)7):格式化(INITIALISE)8):退出(E某IT)3.3.1.5表编辑(EDITTABLES)1):TEC--规准表(工艺文件的定义)2):OFS--偏移量(补正量)3):VAR--变量(变量值代入)4):WIR--电极丝(使用线参数)3.3.2.E某ECUTION执行方式某配置机台某调节多种参数某运行测量功能某在开始加式操作之前,执行所需要的测试3.3.2.1.执行程序(PROGRAME某ECUTION)1).切割(CUT)2).空跑(DRYRUN)3).检验(VERIFY)4).绘图(DRAWONSCREEN)5).改变模式(CHANGEUNIT)3.3.2.2.用户参数(USERPARAMETERS)1)HPA:工件设度2)CLE:补偿间隙3)SCF:比例系数4)ROT:工件旋转5)TFE:补正量认可6)TRE:斜度认可7)MIR,某:某镜像8)MIR,Y:Y镜像9)ZID:下导头至平台距离10)ZSD:上导头至工件顶部距离11)BLK:单节执行12)CBC:一个命令一个命令执行13)SIM:加工与空跑转换14)TSIM:模拟穿丝15)VSIM:空跑速度16)BLD:遇"/"跳过17)OSP:选择性暂停18)ENG:选择单位19)COE:遇不错误继续执行20)ART:断电后自动重启动21)ATH:断丝后重穿丝22)CHRA:选择表面精度的单位23)WIRELN:电极丝的消耗量24)MIOL:测量允许的误差25)DVI:缺省使用的源外设26)E某T:缺省扩展27)DEIO:电介液的导电率28)ATT:开始切入路径的长度29)EAO:遥控报警3.3.2.3:电源参数(GENERAOPARAMETERS)某EL:使用的电极丝号某PA:工件的材料号1)FF:暂时降低频率2)M:切割方式3)V:切割电压4)A:脉冲宽度(放电时间)5)B:休止时间6)S:最大进给率7)AJ:伺服基准平均电压8)TAC:短脉冲时间9)IAL:点火脉冲电流10)WS:走丝速度11)WB:线张力12)INJ:水压13)ST:保护策略3.3.2.4:作图参数(DRAWINGPARAMETERS)<略> 3.3.2.5:激活表(ACTIVETABLES)1).TEC:工艺表2).OFS:补正值表3).VAR:变量表4).PNT:点表5).WIR:电极丝准备表3.3.2.6:测量(MEASURING)测量功能用于执行一系列操作,这些操作分成两类.某机台调校测量某电极丝相对于被加工工件位置的测量某电极丝相对于被加工工件位置的测量1).找外轮廓中心(E某TERNALCENTERING)2).找中心平面(MIDDLE)(寻沟槽)3).找拐角(CORNER)4).测角度(ALIGNADGE)5).校孔ALIGNHOLES6).找边EDGE7).电极丝校垂直VERTICALALIGNMENT8).找中心CENTER9).工件校垂直PARTALIGNMERNT10).测ZIDGUIDESSETUP11).喷嘴调节NOZZLEADJUST12).垂直返回VERTICALRETURN13).工件返回PARTRETURN注意:1).一定要在加工状态下执行测量功能,例如,上导向器在低位置(工作位置),丝的张力正确(张力已校准,并且WB=精加工张力).水的离子浓度合适(即水电阻率要求范围)并保持恒温.2).被加工工件必须除油,去磁,去毛刺.3).每周一次,或者在每次加工高精度,斜度加工之前,特别是拆卸导向器后,要执行电极丝导向器设定功能.4).确信使用的电接触类型与所用电极丝的类型一致.5).开始测量前,要确认电极丝没有与被测量物短路.3.3.2.7.手动(MANUAL)1).接触激活/不激活动力(TOUCHACTIVE)2).返回断线点或轮廓(RETURNCONTOUR)3).电源参数(GENERATORPARAMETERS)4).点动/连续方式(INCREMENTALMODE)5).接通/断开接触(SWITCHOFFCONTACT)6).激活/不激活(SWITCHOFFJET)7).软极限(SOFTLIMITS)3.3.2.8.基准点(REFERENCE)机台配置的光栅尺每10MM有一个基准标记,任何一个基准标记都可以用来决定坐标轴的基准位置.3.3.2.9服务(SERVICE)1).日期和时间(DATEHOUR)2).周期(CYCLES)3).语言(LANGUAGE)4).安全(SECURITY)查询模式某它汇集了所有涉及到机台配和加工操作监视的信息.3.3.3.1观察画面(SURVEY)1).机台坐标系(MACHINE)2).工作坐标系(PART)3).速度(SPEED)4).压力(PRESURE)5).去离子(DEIO)6).DO=0.000(补正值)3.3.3.2加工画面(MACHINING)3.3.3.3运行程序画面(RUNNINGPROGRAMS) 3.3.3.4信息画面(MESSAGES)3.3.3.5模态状况画面(MODALSTATE)3.3.3.6空白画面(BLANK)3.3.3.7参考点画面(REFERENCE)3.3.3.8输入输出画面(INPUTS-OUTPUTS) 3.3.3.9断丝点画面(BREAKAGEPOINTS)3.3.3.10参考点画面(REFERENCE)3.3.3.11输入输出画面(INPUTS-OUTPUTS) 3.3.3.12断丝点画面(BREAKAGEPOINTS)3.3.3.13服务画面(SERUICE)3.4GRAPHIC图形方式上显示电极丝行经的轨迹.3.5常用命令词:3.5.1CTA:用于机床坐标系的绝对加工移动.3.5.2CTR:用于机床坐标系的相对加工移动.3.5.3CPA:用于工件坐标系的绝对加工移动.3.5.4CPR:用于工件坐标系的相对加工移动.3.5.5GOH:用于移动Z轴,并根据新的工件高度H定位上导向器喷嘴的位置.3.5.6GOP:把机床各轴移动到用SEP命令储存的点位.3.5.7MOV:在机床坐标系中移动到所选定的数值.3.5.8MVR:在机床坐标中相对移到所选定的数值.3.5.9MPA:在工件坐标中移动到所选定的数值.3.5.10MPR:在工件坐标中相对移动到所选定的数值.3.5.11RE某:从当前规准表中取规准,传输给加工电源,参数根据工件高度H设定.3.5.12SEP:点记忆.3.5.13ZCL:时间计数器清靃.3.5.14SMA:设定机床坐标系的某轴和Y轴坐标.3.5.15SPA::设定工件坐标系的某轴和Y轴坐标.3.5.16SPG:用来执行一个工件程序文件.3.5.17TEC:用于选择含有即将使用的工艺规准表文件.3.5.18CLS:清屏幕显示的图形页.3.5.19CPY:用于拷贝原文件到另一前设,可以换名字.3.5.20DLF:删除文件.3.5.21LOOP:返回命令程序起点,并执行一定次数.3.5.22SWA:存储电极丝按工作表面手动校直位置.3.6加工前检查清单:3.6.1«电介液»功能检查:3.6.1.1过滤:确认过滤网压力表读数是否在设定范围,观察导电块冷却区是否有水浸泡.3.6.1.2去离子度:15±2U.CM3.6.1.3温度:20±0.53.6.2«腐蚀»功能的检查:3.6.2.1导电块:是否被水浸泡,表面磨损情况及安装质量.3.6.2.2接地电缆和编织线:各电缆连接是否牢固.3.6.3«电极丝更换»的检查:3.6.3.1丝的种类(直径.材料)3.6.3.2走丝是否正常3.6.3.3如果安装新的丝轴,检查丝轴的质量.丝是否有氧化.3.6.3.4丝的校直和退火.3.6.4工件安装检查:3.6.4.1夹治具的清洗.3.6.4.2工件去毛刺.清洁.3.6.4.3工件装夹.3.6.4.4工件的调整.3.6.5参数调整和检查:3.6.5.1绝对参考点找取.3.6.5.2在更换(重新装)导向器之后,进行«导向器»设定循环.3.6.5.3在更换喷嘴或更换导向之后,运行«喷嘴调节»过程.3.6.5.4如果没有在命令程序内设定丝参数,就要在程序一开始加入该设定.3.6.5.5在«E某E»方式下检查«用户»和«电源»参数什是否在工件切割时要求的参数值.3.6.5.6在丝准备表内选择丝文件.(.WIR)3.6.5.7选择需要的工艺文件.(.TEC)3.6.5.8选择用户偏移文件.(USER.OFS)3.6.6程序运行.3.6.7开始切割.。

User's GuideAI4S-192 Analog Expansion Board for Hammerfall DSP 9632 4 Channels 24 Bit 192 kHzContents1 Introduction (3)2 Package Contents (3)3 Hardware Requirements (3)4 Technical Specifications (3)5 Hardware Installation (4)6 Alternative Installation (5)7 Operation and Usage (5)8 Pin assignment of the TRS jacks (5)9 Warranty (6)10 Appendix (6)1. IntroductionThank you for choosing the AI4S-192. This Analog Expansion Board adds 4 analog inputs in professional quality to RME's HDSP 9632. Level adjustment, balanced circuit design, 111 dBA SNR and highest suppression of PC-noise guarantee perfect sound quality.2. Package ContentsPlease ensure that all the following parts are included in the AI4S-192's packaging box:• Analog Expansion Board• 1 flat ribbon cable, 26 pins• 1 Set of nuts• Manual, drill template3. Hardware RequirementsThe AI4S-192 can only be connected to the HDSP 9632. No more than one AI4S-192 can be connected to each HDSP 9632.4. Technical Specifications• Resolution AD: 24 Bit• SignaltoNoiseratio(SNR):109dBRMSunweighted,**************• THD @ -3 dBFS: -101 dB, < 0.001 %• THD+N @ -3 dBFS: -99 dB, < 0.0015 %• Crosstalk: 108 dB• ***************************,-0.5dB:5Hz-21.5kHz• Frequency response AD @ 96 kHz, -0.5 dB: 5 Hz – 45.3 kHz• Frequency response AD @ 192 kHz, -1 dB: 5 Hz - 74 kHz• Input: 4 x 1/4" TRS jack, servo balanced• Input impedance: 10 kOhm• Input sensitivity: Lo Gain, +4 dBu, -10 dBV• Input level for 0 dBFS @ Lo Gain: +19 dBu• Input level for 0 dBFS @ +4 dBu: +13 dBu• Input level for 0 dBFS @ -10 dBV: +2 dBV• Power supply via flat ribbon cable• Standard bracket, board dimensions 90 x 95 mmImportant: Switch off the computer and remove the power cable from the power supply be-fore fitting the AI4S-192.1. Disconnect the power cable and all other cables from the computer.2. Remove the PC housing; further information on how to do this can be obtained from yourcomputer´s instruction manual.3. Neutralize the static build up by touching the PC metal-chassis before unpacking the AIfrom the protective bag.4. Connect AI and HDSP 9632 using the supplied 26-pin flat cable.5. Insert the AI into a free slot, press and fasten the screw. The AI needs no slot on the moth-erboard, but includes a stabilizing edge, which fits in both PCI and ISA slots.6. Re-insert the PCI-card in a PCI slot and fasten the screw.7. Re-place the PC housing and tighten the screws.8. Re-connect the power cable and all other cables/connections.Connecting an AI4S-192 to a HDSP 9632Both AI4S-192 and AO4S-192 have two flat cable connectors. The second connector allows to use an AI4S-192 together with an AO4S-192.Installation is done comfortably as described using the attached bracket. Alternatively it is pos-sible to mount the AI at a different place inside the computer using the supplied nuts. This re-quires to drill 4 holes into the housing.RME does not accept claims for damages of any kind when installing the AI in this Array way! Modifications to the housing should be done by qualified technicians only, and only after having removed all components from the housing (danger of short circuit by metal splinter etc).1. Remove the bracket from the AI (2 screws).2. Carefully check that the desired location offers a flat plane, is free from any voltage carryingdevices or cables, and that the AI does not get in contact with other devices even when the housing is closed.3. Please note that the lenght of the supplied cables does not allow any distance to the HDSP9632 card.*4. Drill 4 holes, diameter 0.5" (13 mm), distance of 0.75" (19.05 mm) each, at the desiredplace (see drill template).5. Fit the AI into the holes and fix it with the supplied nuts.*The supplied 26-pin flat ribbon cable is a common component, available in any electronics shop. A cable of up to 1 meter length can be used without a problem.7. Operation and UsageSwitch on the computer and boot the OS. 4 additional inputs should now be available within any audio software.Note: the AI carries three SMD LEDs, indicating the presence of the power supplies +5V, +12V and –12 V.8. Analog InputsThe analog inputs are accessible through stereo ¼" TRS jacks.The AI4S-192 is fitted with electronically balanced, single channel inputs (+ = tip). The servo balanced input circuit allows to use monaural TS jacks (unbalanced) with no loss in level.When using unbalanced cables with stereo TRS jacks: be sure to connect the 'ring' contact of the stereo TRS jack (pin 3 of a XLR jack) to ground. Otherwise noise may occur, caused by the unconnected negative input of the balanced input.One of the main issues when working with an AD-converter is to maintain the full dynamic range within the best operating level. Therefore the HDSP 9632 and the AI/AO4S-192 use hi-quality electronic switches, which allow for a perfect adaptation of all inputs to the three most often used studio levels.The 'standardized' studio levels do not result in a (often desired) full scale level, but take some additional digital headroom into consideration. The amount of headroom is different in differentstandards, and again differently implemented by different manufacturers. Because of this wedecided to define the levels of the HDSP 9632 in a most compatible way.Reference 0 dBFS @ HeadroomLo Gain +19 dBu 15 dB+4 dBu +13 dBu 9 dB-10 dBV +2 dBV 12 dBWith +4 dBu selected, the according headroom meets the latest EBU recommendations for Broadcast usage. At -10 dBV 12 to 15 dB headroom are common practice, each mixing desk operating at -10 dBV is able to send and receive much higher levels. Lo Gain allows to work with high levels, best suited for professional users who prefer to work balanced and at highest levels.The above levels are also found in our ADI-8 series of AD/DA converters, the Multiface, and even our Mic-Preamps QuadMic and OctaMic. Therefore all RME devices are fully compatible to each other.9. WarrantyEach individual AI4S-192 undergoes comprehensive quality control and a complete test in a PC environment at RME before shipping. The usage of high grade components allows us to offer a full two year warranty. We accept a copy of the sales receipt as valid warranty legitima-tion.RME’s replacement service within this period is handled by the retailer. If you suspect that your card is faulty, please contact your local retailer. The warranty does not cover damage caused by improper installation or maltreatment - replacement or repair in such cases can only be car-ried out at the owner’s expense.RME does not accept claims for damages of any kind, especially consequential damage. Liabil-ity is limited to the value of the AI4S-192. The general terms of business drawn up by Synthax Audio AG apply at all times.10. AppendixRME news, driver updates and further product information are available on our website:http://www.rme-audio.deIf you prefer to read the information off-line, you can load a complete copy of the RME website from the RME Driver CD (in the \rmeaudio.web directory) into your browser.TrademarksAll trademarks and registered trademarks belong to their respective owners. RME and Ham-merfall are registered trademarks of RME Intelligent Audio Solutions.Copyright © Matthias Carstens, 7/2003. Version 1.0Current driver version: W2k: 2.60Although the contents of this User’s Guide have been thoroughly checked for errors, RME can not guarantee that it is correct throughout. RME does not accept responsibility for any misleading or incorrect information within this guide. Lending or copying any part of the guide or the RME drivers CD, or any commercial exploitation of these media without express written permission from RME Intelligent Audio Solutions is prohibited. RME reserves the right to change specifications at any time without notice.This device has been tested and found to comply with the limits of the European Council Direc-tive on the approximation of the laws of the member states relating to electromagnetic com-patibility (EMVG) according to EN 55022 class B and EN50082-1.FCC Compliance StatementCertified to comply with the limits for a Class B computing device according to subpart J or part 15 of FCC rules. See instructions if interference to radio reception is suspected.FCC WarningThis equipment has been tested and found to comply with the limits for a Class B digital de-vice, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This device complies with part 15 of FCC rules. Operation is subject to the following two condi-tions:1. This device may not cause harmful interference2. This device must accept any interference received, including interference that may causeundesired operation.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be de-termined by turning the equipment off and on, the user is encouraged to try to correct the inter-ference by one or more of the following measures:• Reorient or relocate the receiving antenna• Increase the seperation between the equipment and receiver• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected• Consult the dealer or an experienced radio/TV technician for help.In order for an installation of this product to maintain compliance with the limits for a Class B device, shielded cables must be used for the connection of any devices external to this prod-uct.。

ISL9200火灾报警控制器操作及维护手册1第一章概要1.1关于手册手册里下边的图片是表示小心、警告或注解。

小心：关于能引起编程错误、运行时错误、设备损坏的信息。

警告：关于控制器损坏、程序丢失、器件损坏的信息。

注解：在前边或后边叙述的重要文字和图表的重要信息。

1.2控制器简介ISL9200是一个具有多种功能的智能火灾报警控制系统（FACP）。

CPU-3030还可以配带一个显示/键盘选件，在控制器上，通过它可以编程和浏览。

ISL9200有两个基本配置选项。

它的配置如下：•配带一个显示/键盘单元，通过它可以编程和浏览。

•没有显示/键盘。

本手册讲述显示/键盘的使用方法。

无显示模式在ISL9200系统上没有安装键盘/显示单元时，这个控制器通过远程告警器控制，需要 VeriFire TM编程软件。

这个无显示控制器在电路板上有四个按钮，主要用于本地操作。

这些按钮中，ACK的是确认按钮，SIGSIL是消音按钮，SYSRST是系统复位按钮，LAMPTEST是灯检按钮，这些按钮主要是安装者使用，如果可能，操作员将利用一个远程告警器来实现这些功能。

电路板上的LED状态指示灯和显示/键盘单元上的一样。

（参见手册的第九页上的“显示/键盘”）对于无显示NFS－3030编程，参见VeriFire TM工具或NCA手册。

1.3操作功能•报警校验选项，用于减少误报•正向报警序列（PAS）满足NFPA 72标准的预警功能•为告警回路（NAC）提供了禁止消音定时器和自动消音定时器•为控制器电路模块提供了连续/间断编码•可编程信号消音、系统复位和监视模块报警启动功能•假期选项，可以自动调整工作日和周末时间•AWACS（智能火灾感应算法）带有可编程事件驱动功能和9级现场调节报警/预警级别•安全报警点选项带有独立的有声信号编码•集中的语音呼叫和语音报警选项•可编程的事件驱动输出，联动条件可以是独立的报警或者可编址监视设备•适用于于大型应用的与其它FACP连网的网络功能探测器灵敏度可以根据编程设定的时间表自动调整1.3.1显示/键盘显示/键盘单元提供了一个易于使用的键盘和大屏幕LCD（液晶显示屏），使编程过程简单方便。