外文文献及其翻译

金融体制、融资约束与投资——来自OECD的实证分析R．SemenovDepartment of Economics，University of Nijmegen，Nijmegen（荷兰内梅亨大学，经济学院）这篇论文考查了OECD的11个国家中现金流量对企业投资的影响.我们发现不同国家之间投资对企业内部可获取资金的敏感性具有显著差异,并且银企之间具有明显的紧密关系的国家的敏感性比银企之间具有公平关系的国家的低.同时，我们发现融资约束与整体金融发展指标不存在关系.我们的结论与资本市场信息和激励问题对企业投资具有重要作用这种观点一致，并且紧密的银企关系会减少这些问题从而增加企业获取外部融资的渠道。

一、引言各个国家的企业在显著不同的金融体制下运行。

金融发展水平的差别(例如，相对GDP的信用额度和相对GDP的相应股票市场的资本化程度），在所有者和管理者关系、企业和债权人的模式中，企业控制的市场活动水平可以很好地被记录.在完美资本市场,对于具有正的净现值投资机会的企业将一直获得资金。

然而，经济理论表明市场摩擦，诸如信息不对称和激励问题会使获得外部资本更加昂贵，并且具有盈利投资机会的企业不一定能够获取所需资本.这表明融资要素，例如内部产生资金数量、新债务和权益的可得性，共同决定了企业的投资决策.现今已经有大量考查外部资金可得性对投资决策的影响的实证资料（可参考，例如Fazzari（1998）、 Hoshi(1991)、 Chapman（1996）、Samuel(1998））.大多数研究结果表明金融变量例如现金流量有助于解释企业的投资水平。

这项研究结果解释表明企业投资受限于外部资金的可得性。

很多模型强调运行正常的金融中介和金融市场有助于改善信息不对称和交易成本，减缓不对称问题,从而促使储蓄资金投着长期和高回报的项目,并且提高资源的有效配置（参看Levine（1997)的评论文章）。

因而我们预期用于更加发达的金融体制的国家的企业将更容易获得外部融资.几位学者已经指出建立企业和金融中介机构可进一步缓解金融市场摩擦。

外文文献原稿和译文原稿DATABASEA database may be defined as a collection interrelated data store together with as little redundancy as possible to serve one or more applications in an optimal fashion .the data are stored so that they are independent of programs which use the data .A common and controlled approach is used in adding new data and in modifying and retrieving existing data within the data base .One system is said to contain a collection of database if they are entirely separate in structure .A database may be designed for batch processing , real-time processing ,or in-line processing .A data base system involves application program, DBMS, and database.THE INTRODUCTION TO DATABASE MANAGEMENT SYSTEMSThe term database is often to describe a collection of related files that is organized into an integrated structure that provides different people varied access to the same data. In many cases this resource is located in different files in different departments throughout the organization, often known only to the individuals who work with their specific portion of the total information. In these cases, the potential value of the information goes unrealized because a person in other departments who may need it does not know it or it cannot be accessed efficiently. In an attempt to organize their information resources and provide for timely and efficient access, many companies have implemented databases.A database is a collection of related data. By data, we mean known facts that can be recorded and that have implicit meaning. For example, the names, telephone numbers, and addresses of all the people you know. You may have recorded this data in an indexed address book, or you may have stored it on a diskette using a personalcomputer and software such as DBASE Ⅲor Lotus 1-2-3. This is a collection of related data with an implicit meaning and hence is a database.The above definition of database is quite general. For example, we may consider the collection of words that made up this page of text to be usually more restricted. A database has the following implicit properties:● A database is a logically coherent collection of data with some inherent meaning. A random assortment of data cannot be referred to as a database.● A database is designed, built, and populated with data for a specific purpose. It has an intended group of user and some preconceived applications in which these users are interested.● A database represents some aspect of the real world, sometimes called the miniworld. Changes to the miniworld are reflected in the database.In other words, a database has some source from which data are derived, some degree of interaction with events in the real world, and an audience that is actively interested in the contents of the database.A database management system (DBMS) is composed of three major parts: (1) a storage subsystem that stores and retrieves data in files; (2)a modeling and manipulation subsystem that provides the means with which to organize the data and to add, delete, maintain, and update the data; and (3) an interface between the DBMS and its users. Several major trends are emerging that enhance the value and usefulness of database management systems.●Managers who require more up-to-date information to make effective decisions.●Customers who demand increasingly sophisticated information services and more current information about the status of their orders, invoices, and accounts.●Users who find that they can develop custom applications with database systems in a fraction of the time it takes to use traditional programming languages.●Organizations that discover information has a strategic value; they utilize their database systems to gain an edge over their competitors.A DBMS can organize, process, and present selected data elements from the database. This capability enables decision makers to search, probe, and query database contents in order to extract answers to nonrecurring and unplanned questions that aren’t available in regular reports. These questions might initially be vague and/or p oorly defined, but people can “browse” through the database until they have the needed information. In short, the DBMS will “mange” the stored data items and assemble the needed items from the common database in response to the queries of those who aren’t programmers. In a file-oriented system, user needing special information may communicate their needs to a programmer, who, when time permits, will write one or more programs to extract the data and prepare the information. The availability of a DBMS, however, offers users a much faster alternative communications path.DATABASE QUERYIf the DBMS provides a way to interactively enter and update the database ,as well as interrogate it ,this capability allows for managing personal database. However, it does not automatically leave an audit trail of actions and does not provide the kinds of controls necessary in a multi-user organization .There controls are only available when a set of application programs is customized for each data entry and updating function.Software for personal computers that perform some of the DBMS functions has been very popular .Individuals for personal information storage and processing intended personal computers for us .Small enterprises, professionals like doctors, architects, engineers, lawyers and so on have also used these machines extensively. By the nature of intended usage ,database system on there machines are except from several of the requirements of full-fledged database systems. Since data sharing is not intended, concurrent operations even less so ,the software can be less complex .Security and integrity maintenance are de-emphasized or absent .as data volumes will be small, performance efficiency is also less important .In fact, the only aspect of a database system that is important is data independence. Data independence ,as stated earlier ,means that application programs and user queries need not recognize physical organization of data on secondary storage. The importance of this aspect , particularly for the personal computer user ,is that this greatly simplifies database usage . The user can store ,access and manipulate data at ahigh level (close to the application)and be totally shielded from the low level (close to the machine )details of data organization.DBMS STRUCTURING TECHNIQUESSpatial data management has been an active area of research in the database field for two decades ,with much of the research being focused on developing data structures for storing and indexing spatial data .however, no commercial database system provides facilities for directly de fining and storing spatial data ,and formulating queries based on research conditions on spatial data.There are two components to data management: history data management and version management .Both have been the subjects of research for over a decade. The troublesome aspect of temporal data management is that the boundary between applications and database systems has not been clearly drawn. Specifically, it is not clear how much of the typical semantics and facilities of temporal data management can and should be directly incorporated in a database system, and how much should be left to applications and users. In this section, we will provide a list of short-term research issues that should be examined to shed light on this fundamental question.The focus of research into history data management has been on defining the semantics of time and time interval, and issues related to understanding the semantics of queries and updates against history data stored in an attribute of a record. Typically, in the context of relational databases ,a temporal attribute is defined to hold a sequence of history data for the attribute. A history data consists of a data item and a time interval for which the data item is valid. A query may then be issued to retrieve history data for a specified time interval for the temporal attribute. The mechanism for supporting temporal attributes is to that for supporting set-valued attributes in a database system, such as UniSQL.In the absence of a support for temporal attributes, application developers who need to model and history data have simply simulated temporal attributes by creating attribute for the time interval ,along with the “temporal” attribute. This of course may result in duplication of records in a table, and more complicated search predicates in queries. The one necessary topic of research in history data management is to quantitatively establish the performance (and even productivity) differences betweenusing a database system that directly supports attributes and using a conventional database system that does not support either the set-valued attributes or temporal attributes.Data security, integrity, and independenceData security prevents unauthorized users from viewing or updating the database. Using passwords, users are allowed access to the entire database of the database, called subschemas. For example, an employee database can contain all the data about an individual employee, but one group of users may be authorized to view only payroll data, while others are allowed access to only work history and medical data.Data integrity refers to the accuracy, correctness, or validity of the data in the database. In a database system, data integrity means safeguarding the data against invalid alteration or destruction. In large on-line database system, data integrity becomes a more severe problem and two additional complications arise. The first has to do with many users accessing the database concurrently. For example, if thousands of travel agents book the same seat on the same flight, the first agent’s booking will be lost. In such cases the technique of locking the record or field provides the means for preventing one user from accessing a record while another user is updating the same record.The second complication relates to hardware, software or human error during the course of processing and involves database transaction which is a group of database modifications treated as a single unit. For example, an agent booking an airline reservation involves several database updates (i.e., adding the passenger’s name and address and updating the seats-available field), which comprise a single transaction. The database transaction is not considered to be completed until all updates have been completed; otherwise, none of the updates will be allowed to take place.An important point about database systems is that the database should exist independently of any of the specific applications. Traditional data processing applications are data dependent.When a DMBS is used, the detailed knowledge of the physical organization of the data does not have to be built into every application program. The application program asks the DBMS for data by field name, for example, a coded representationof “give me customer name and balance due” would be sent to the DBMS. Without a DBMS the programmer must reserve space for the full structure of the record in the program. Any change in data structure requires changes in all the applications programs.Data Base Management System (DBMS)The system software package that handles the difficult tasks associated with creating ,accessing and maintaining data base records is called a data base management system (DBMS). A DBMS will usually be handing multiple data calls concurrently.It must organize its system buffers so that different data operations can be in process together .It provides a data definition language to specify the conceptual schema and most likely ,some of the details regarding the implementation of the conceptual schema by the physical schema.The data definition language is a high-level language, enabling one to describe the conceptual schema in terms of a “data model “.At the present time ,there are four underling structures for database management systems. They are :List structures.Relational structures.Hierarchical (tree) structures.Network structures.Management Information System(MIS)An MIS can be defined as a network of computer-based data processing procedures developed in an organization and integrated as necessary with manual and other procedures for the purpose of providing timely and effective information to support decision making and other necessary management functions.One of the most difficult tasks of the MIS designer is to develop the information flow needed to support decision making .Generally speaking ,much of the information needed by managers who occupy different levels and who have different levels and have different responsibilities is obtained from a collection of exiting information system (or subsystems)Structure Query Language (SQL)SQL is a data base processing language endorsed by the American NationalStandards Institute. It is rapidly becoming the standard query language for accessing data on relational databases .With its simple ,powerful syntax ,SQL represents a great progress in database access for all levels of management and computing professionals.SQL falls into two forms : interactive SQL and embedded SQL. Embedded SQL usage is near to traditional programming in third generation languages .It is the interactive use of SQL that makes it most applicable for the rapid answering of ad hoc queries .With an interactive SQL query you just type in a few lines of SQL and you get the database response immediately on the screen.译文数据库数据库可以被定义为一个相互联系的数据库存储的集合。

To connect SQL Server databaseFirst we introduce the basic knowledge of the database,be regarded as thewarm-up exercise that study database weave distance front!1.warm-up exerciseNeeding first avowal is relation database that database knowledge that we here introduce all point. The so-called relation database is to mean data as that the form gather, passing to establish simple form an a kind of database for of relation to defining construction.I ignore the watch at how saving way in physics in the document in database is,it can see to make an a line for with row, with electronics form is similar with the row.In relation database, the line were called the record, but the row then is called word segment.This form inside each an all in formations for is a record, it including particular customer, but each record then included the same type with the word segment of the quantity:Customer's number, name etc.Form is logic set that a kind of related information that press a line of arrangingwith row, similar in single form in work.Each row of the word a database form inside calls a word segment. Watch isfrom every kind of word a definition of its containment of, each word a data for describing its implying. While creating to set up a database, the beard assign for each word segment a the piece belongs to the sex with the other according to thetype,biggest length.The word segment can include every kind of word sign,arithmetic figure even sketch.An information of relevant customer deposits in the line of the form, is called record.By any large, arbitrarily two records for database form to create set up can't be same.Key be a certain word segment( or several words segment) of the form inside, it()for fast inspect but drive index. The key can be unique, and also can then the right and wrong is unique, being decided by it() whether admission repetition. Unique key can specify for main key, using each one that come to unique marking form.The norm turns the database design of mission be method that the data of buildup,but the data of buildup, should can dissolve otiose repetition, and for have the necessary information offering to check to seek the path quickly. For attaining this kind of target but separate information to the process gone to in every kind of independent form, be called the norm turn.It is complicated process to use many appointed rules to proceed the norm withthe type of the different Class that norm turn. That process studies and discuss already beyond the reach of textual scope.But,the norm of the simple database in majority turn and can use the simple experience in underneath rule completes: include the form of the information of repetition must be divided into independent a few forms dissolve repetition.If we have chosen to learn 12 curricular 1000 students, the each curricularandcurricular that choose to -many100 teacher the with show will elucidation eachstudent repeat once.To avoid this kind of low efficiency, should to turn the dichotomous and independent form in form to the norm,an is used to mean the student,the another uses mean the course.Now the form was turned by the norm, so, to changes the particular andcurricular course describe or data,as long as change a record all right.Is a basic knowledge concerning database above,this is what study database plait distance must.Although the database technique is used as a course,its depth is not this space and can describe with the wide degree of,be used as the primer with simple database plait the distance should be all right already.Like,underneath we can start practicing.We usually meet the database system is to registers the system,ignoring you are in the unit,or attend what buildup,the register is to cans not help of,and it of the construction is more simple,we take a register system as an example.The analysis is once a data for involving.2. understanding the elementsFor the register, want the on the trail of information include:name、sex、native place、age、date of birth、unit、address、postal service codes、telephone、FAX. Certainly,can create to set up a form in brief,make above each piece according to item to should a word segment.Need to point the form the main key in parties now, in order to unique marking each a record,increase register number conduct and actions unique key respectively in register form,guarantee a two records like this all different.To the database after making an above analysis,we can start establishing the database.3.set up the firm in campHere we study to establish the database how,needing to make sure the typethat to establish the database first.Pass in Visual Basic the data interview control piece or data interview object ( DAO) can visit the following database:1)The database of JET, namely Microsoft Access2)The database of ISAM, such as: DBase, etc. of FoxPro3)The database of ODBC,every follow the standard of ODBC customer/ server database. Such as: Microsoft SQL Server, OracleBy any large, if develop the personal small scaled database system, use Access database comparison accommodation, to develop the big and medium-sized database system uses the database of ODBC fester. But dBase with the database of FoxPro because of already dated,unless special circumstance,do not use otherwise.In our example, chose to use the database of Access certainly. Establish the database of Access contain two kinds of methods: While establishing the database in Microsoft Access. Click new set up button can establish the new form. Here we main introduction the second method: The usage can see to turn the data management machine, do not need to weave the distance and then can create to set up the database.Can see to turn the data management machine is the applied procedure of a great use,it is a VB business enterprise version is supplementary with theprofession version, in the catalogue\..\ Devastation\ vb\ samples\ the Visdata is next, its interface is as follows the diagram.Click the menu document item is next newset up son item Microsoft ACCESS son item of edition 7.0 MDB item. Input thenew setting upthe name of the database in flick window way open register, appear the underneath show the window way:Want the born and new form, the single shot in right key database window way flicks the menu open, then the choice new form ordinaries,establishing in watch construction dialog box appeared later on a word for wanting segment. The every time faces to join in the form new word segment, single shot increment word segment button, will appear of increment word segment dialog box.Increment word a type for options in the dialog box, according to word segment.In our the register database that establish, the type of the each word segment.Want to notice of is, because the word segment registers the number be used unique marking record of, therefore, it can't be inputted by customer. So while defining the word's segment need to be defined for Long data type, the automatic born word segment item is valid, and picks out this item. Be the customer like this to input to record with other the different value every input a new record, system would on the word's segment automatically.In ACCESS database, the key word realizes with the index of, conduct andactions plait distance personnel at gather to weave the distance to the record of the form type,needs to adjust to use index.While searching,the technique of Rushmore uses the index information the excellent turning the search automatically. Aftercompleting the form definition, click increment index button, flick such aspen figure 5 show the window way.In window way the right side contain three optioned, its meaning, such as table,12.Increase the index dialog box options.After completing such as figure 6.Certainly, the academic association database establishes too not a dynasty the business of the one night, the reader no harm much practices once. Visit databases design and the development of the application procedures ofMS Visual Basics of the databases of the SQL Server. When design a system, the customer still needs to comprehend to use to come to visit the plait distance of ask the data of SQL Server to connect. The origin was detailed to elaborate that the usage open type database conjunction (the Open Database Connectivity, ODBC) adjusts to connect the objects to connect with the class, still having the data interviews object (the Data Access Objects, the DAO) and the long-range data objects.Design and weave to write large and complicated and applied procedure's database design for the software developer is a challenge, need to choose to weave the distance language and tools, do an accommodation for the SQL Server, choose the calculate way and the data structures, still need to design the sketch customer interface and the application procedures to connect. The decision within the most important software design is applied fixed position of the procedure. In other words, design must specify the system of which parts are data, business rule, and the data entrance procedure and used for circulating the code of other part. The MS Visual Basic supports the plait distance that some databases manage the systems connect, especially SQL Server. Adjust to connect to include the ODBC and DB-Libraries toconnect the, object to connect to include the data interview object (DAO), long range data object (the RDO), the OLE DB and the ActiveX Data Objects (ADO) with the class, todistributes mission the manage to Server SQL capable the returns that SQL the manage the object (the SQL Distributed management Objects, SQL-DMO) to connect. Connect the oculars right choice can improve the whole function of system and the development speed biggest. Design the large data warehouse system needs to choose the applied model properly. Traditional customer/ service's model depends on to join in the center layer but get the improvement to become three layer models. These three layers divide the line system as three parts: each layer is responsible for providing the service:(1) Data service( the Data Service) contain the maintenance data and the operation date such as the increment, modification, deletion and backups.These services maintenance data relation and contact,support backup and ually the data service is managed the system usage by the database.(2) business service( the Business Service) is handled the logic by the businessrule and data to constitute, such as the data legitimacy rule, the business processing support and the record backup logics. The main purpose of these services provides the data maintenance toward the application procedure Logic.(3) expression service( the Presentation Service)( or the customer service) support customer interface, control the customer data to input to express with data.(Output) Notice in customer/ service's technical term, sometimes express the service definition as customer's machine (or head), the data service definition for server (or after carry), but the business service is in the center the layer (the middle layer). But important comprehend any two layers .The data service business service expresses the logic support GUI that the service maintenance database business rule and the processing data need, data importation and manifestation the correspondences can think to carry on between customer's machine and servers. For example, in the center the layer can think is a head.Server The physics realization of the system can carry on through many different paths.The underneath wills discuss three layer logic models three kinds of to carry out the method:1.Fat customer machine realizationMany layer (the multi tier) realizations of fat customer the machine realization three layer models of a kind of carry out the options is in the customer's on board movement business and expression services. This probably writes the most common path in the Visual Basic application procedure for the SQL Server. This kind of carries out the physics up only two layers:The server provides the data service only, this kind of method contain 2:00 shortage. First, was the applied procedure to compute the on board increment at the customer, customer's calculators need to be stronger, this will increase the system expense, because the system usually takes several customer's machines. When the system takes to have the number with thousand million of customer's machine, thiskind of method will become too expensive. Another 1:00 shortage is a possible increment maintenance expenses. Move to the change of legitimacy logic and the business rule of the system and will cause upgrade customer's machine procedure each time. If the system contain customer's machine of the equal quantity, this is a problem. The biggest advantage of the machine realization in fat customer is to reduce the network discharge, if the legitimacy and the business rules need not be decide by the database. Under this kind of circumstance, only pass the data of the legitimacy logic and can spread toward server. Be the example of the importation data legitimacy,suppose the reader to have a small form (for example national form of name) to put in customer's machine. If the data entrance mold piece checks the native watch but is not a more national name in main database, then will reduce the network discharge obviously. Another an important use is in the development process of the system.If the head developer was limited to the interview carry behind, for example, can't pass the data in the database to verify to input the legitimacy, so, this kind of method can make it right processing data.2. Thin customer machine realizationIn thin customer the machine realization, business the service locates the server,the business logic usually expresses for saving process.The Server, the saving process usages T-The SQL plait write. This kind of realization is like fat customer's machine to carry out the similar physics up only two layers.The advantage of this kind of method is to reduce the system expense, because thin customer's machine needs the less system resources, this have very important many systems of customer's machines to take. And, support the expenses to also compare the fat customer the machine system is a little less, because the code carries the concentrated control in the server. If the business rule is depend on in the data of the database, thin customer the machine realization reduces the network discharge. The main shortage of this kind of method is a saving process to lack the vivid. The Visual Basic provide stronger than the T-SQL the plait distance ability that have to have another. Notice three the thin customer of the layer model the machine physics realization sometimes is called the fat server (the fat Server) model to confuse with thin customer's machine/ server calculation model by avoid, the latter points a kind of thin customer the machine hardware equipments and techniques are for example the Citric.3. Many layer realizationMost in brief many layer realizations are three layer realizations, many possible three a kinds of the layer model physics realizations. In this kind of realization, Link the SQL Server usage data service business to serve the thin customer of the machine expression service data service business service of fat customer from the Visual Basic the machine expression service data business the service be an alone the progress circulate. That progress can install for serve in the data same set server of the place or at another one server of the dissimilarity. The key characteristics of this kind of realization is the data service, business to serve the different from expression serve to can do for separation of progress movement in calculator. Three layer realizations.连接SQL Server数据库我们先介绍一下数据库的基本知识，算是学习数据库编程前的热身运动吧!1. 热身运动首先需要声明是，我们这里介绍的数据库知识都是指的关系数据库。

本科毕业论文外文参考文献译文及原文学院经济与贸易学院专业经济学（贸易方向）年级班别2007级 1 班学号3207004154学生姓名欧阳倩指导教师童雪晖2010 年 6 月 3 日目录1 外文文献译文（一）中国银行业的改革和盈利能力（第1、2、4部分） (1)2 外文文献原文（一）CHINA’S BANKING REFORM AND PROFITABILITY（Part 1、2、4） (9)1概述世界银行（1997年）曾声称，中国的金融业是其经济的软肋。

当一国的经济增长的可持续性岌岌可危的时候，金融业的改革一直被认为是提高资金使用效率和消费型经济增长重新走向平衡的必要（Lardy，1998年，Prasad，2007年）。

事实上，不久前，中国的国有银行被视为“技术上破产”，它们的生存需要依靠充裕的国家流动资金。

但是，在银行改革开展以来，最近，强劲的盈利能力已恢复到国有商业银行的水平。

但自从中国的国有银行在不久之前已经走上了改革的道路，它可能过早宣布银行业的改革尚未取得完全的胜利。

此外，其坚实的财务表现虽然强劲，但不可持续增长。

随着经济增长在2008年全球经济衰退得带动下已经开始软化，银行预计将在一个比以前更加困难的经济形势下探索。

本文的目的不是要评价银行业改革对银行业绩的影响，这在一个完整的信贷周期后更好解决。

相反，我们的目标是通过审查改革的进展和银行改革战略，并分析其近期改革后的强劲的财务表现，但是这不能完全从迄今所进行的改革努力分离。

本文有三个部分。

在第二节中，我们回顾了中国的大型国有银行改革的战略，以及其执行情况，这是中国银行业改革的主要目标。

第三节中分析了2007年的财务表现集中在那些在市场上拥有浮动股份的四大国有商业银行：中国工商银行（工商银行），中国建设银行（建行），对中国银行（中银）和交通银行（交通银行）。

引人注目的是中国农业银行，它仍然处于重组上市过程中得适当时候的后期。

第四节总结一个对银行绩效评估。

外文文献及翻译1. 文献："The Effects of Exercise on Mental Health"翻译：运动对心理健康的影响Abstract: This article explores the effects of exercise on mental health. The author discusses various studies that have been conducted on this topic, and presents evidence to support the claim that exercise can have positive impacts on mental well-being. The article also examines the mechanisms through which exercise affects mental health, such as the release of endorphins and the reduction of stress hormones. Overall, the author concludes that exercise is an effective strategy for improving mental health and recommends incorporating physical activity into daily routines.摘要：本文探讨了运动对心理健康的影响。

作者讨论了在这个主题上进行的各种研究，并提出证据支持运动对心理健康有积极影响的观点。

该文章还探讨了运动如何影响心理健康的机制，如内啡肽的释放和压力激素的减少。

总的来说，作者得出结论，运动是改善心理健康的有效策略，并建议将体育活动纳入日常生活。

2. 文献： "The Benefits of Bilingualism"翻译：双语能力的好处Abstract: This paper examines the benefits of bilingualism. The author presents research findings that demonstrate the cognitiveadvantages of being bilingual, such as enhanced problem-solving skills and improved attention control. The article also explores the social and cultural benefits of bilingualism, such as increased cultural awareness and the ability to communicate with people from different backgrounds. Additionally, the author discusses the positive effects of bilingualism on mental health, highlighting its role in delaying the onset of cognitive decline and in providing a buffer against age-related memory loss. Overall, the author concludes that bilingualism offers a range of advantages and recommends promoting bilingual education and language learning. 摘要：本文研究了双语能力的好处。

Yunnan Ethnic pattern in Packaging DesignAbstract: Art is a folk Mother of the arts，is the source of the new art, From which to draw a strong tradition of high—grade Nutrition。

The persons belonging to national folk arts Ethnic patterns，are folk arts Intraoperative a gem, its development Research，and with the means of modern art，art wind Grid，professional skills combine to form a unique Style and features a modern design There are important applications，this paper focuses on Minority Folk pattern in modern packaging design Meter applications are discussed.Keywords: Yunnan Ethnic. Pattern。

Packaging Design.IntroductionYunnan is a multi-ethnic province, Here multiply survive the Han, Yi, Bai More than twenty families， Zhuang, Miao， Dai, etc。

Nation. Long history of various ethnic groups in Yunnan Province， the source is far Long, creating a rich and colorful Folk art。

电气工程的外文文献(及翻译)文献一：Electric power consumption prediction model based on grey theory optimized by genetic algorithms本文介绍了一种基于混合灰色理论与遗传算法优化的电力消耗预测模型。

该模型使用时间序列数据来建立模型，并使用灰色理论来解决数据的不确定性问题。

通过遗传算法的优化，模型能够更好地预测电力消耗，并取得了优异的预测结果。

此模型可以在大规模电力网络中使用，并具有较高的可行性和可靠性。

文献二：Intelligent control for energy-efficient operation of electric motors本文研究了一种智能控制方法，用于电动机的节能运行。

该方法提供了一种更高效的控制策略，使电动机能够在不同负载条件下以较低的功率运行。

该智能控制使用模糊逻辑方法来确定最佳的控制参数，并使用遗传算法来优化参数。

实验结果表明，该智能控制方法可以显著降低电动机的能耗，节省电能。

文献三：Fault diagnosis system for power transformers based on dissolved gas analysis本文介绍了一种基于溶解气体分析的电力变压器故障诊断系统。

通过对变压器油中的气体样品进行分析，可以检测和诊断变压器内部存在的故障类型。

该系统使用人工神经网络模型来对气体分析数据进行处理和分类。

实验结果表明，该系统可以准确地检测和诊断变压器的故障，并有助于实现有效的维护和管理。

文献四：Power quality improvement using series active filter based on iterative learning control technique本文研究了一种基于迭代研究控制技术的串联有源滤波器用于电能质量改善的方法。

论文外文文献翻译以下是一篇700字左右的论文外文文献翻译：原文题目：The Role of Artificial Intelligence in Medical Diagnostics: A Review原文摘要：In recent years, there has been a growing interest in the use of artificial intelligence (AI) in the field of medical diagnostics. AI has the potential to improve the accuracy and efficiency of medical diagnoses, and can assist clinicians in making treatment decisions. This review aims to examine the current state of AI in medical diagnostics, and discuss its advantages and limitations. Several AI techniques, including machine learning, deep learning, and natural language processing, are discussed. The review also examines the ethical and legal considerations associated with the use of AI in medical diagnostics. Overall, AI has shown great promise in improving medical diagnostics, but further research is needed to fully understand its potential benefits and limitations.AI在医学诊断中发挥的作用：一项综述近年来，人工智能（AI）在医学诊断领域的应用引起了越来越多的关注。

外文资料原文涂敏之会计学 8051208076Title:Future of SME finance（c）Background – the environment for SME finance has changedFuture economic recovery will depend on the possibility of Crafts, Trades and SMEs to exploit their potential for growth and employment creation.SMEs make a major contribution to growth and employment in the EU and are at the heart of the Lisbon Strategy, whose main objective is to turn Europe into the most competitive and dynamic knowledge-based economy in the world. However, the ability of SMEs to grow depends highly on their potential to invest in restructuring, innovation and qualification. All of these investments need capital and therefore access to finance.Against this background the consistently repeated complaint of SMEs about their problems regarding access to finance is a highly relevant constraint that endangers the economic recovery of Europe.Changes in the finance sector influence the behavior of credit institutes towards Crafts, Trades and SMEs. Recent and ongoing developments in the banking sector add to the concerns of SMEs and will further endanger their access to finance. The main changes in the banking sector which influence SME finance are:•Globalization and internationalization have increased the competition and the profit orientation in the sector;•worsening of the economic situations in some institutes (burst of the ITC bubble, insolvencies) strengthen the focus on profitability further;•Mergers and restructuring created larger structures and many local branches, which had direct and personalized contacts with small enterprises, were closed;•up-coming implementation of new capital adequacy rules (Basel II) will also change SME business of the credit sector and will increase its administrative costs;•Stricter interpretation of State-Aide Rules by the European Commission eliminates the support of banks by public guarantees; many of the effected banks are very active in SME finance.All these changes result in a higher sensitivity for risks and profits in the financesector.The changes in the finance sector affect the accessibility of SMEs to finance.Higher risk awareness in the credit sector, a stronger focus on profitability and the ongoing restructuring in the finance sector change the framework for SME finance and influence the accessibility of SMEs to finance. The most important changes are: •In order to make the higher risk awareness operational, the credit sector introduces new rating systems and instruments for credit scoring;•Risk assessment of SMEs by banks will force the enterprises to present more and better quality information on their businesses;•Banks will try to pass through their additional costs for implementing and running the new capital regulations (Basel II) to their business clients;•due to the increase of competition on interest rates, the bank sector demands more and higher fees for its services (administration of accounts, payments systems, etc.), which are not only additional costs for SMEs but also limit their liquidity;•Small enterprises will lose their personal relationship with decision-makers in local branches –the credit application process will become more formal and anonymous and will probably lose longer;•the credit sector will lose more and more i ts “public function” to provide access to finance for a wide range of economic actors, which it has in a number of countries, in order to support and facilitate economic growth; the profitability of lending becomes the main focus of private credit institutions.All of these developments will make access to finance for SMEs even more difficult and / or will increase the cost of external finance. Business start-ups and SMEs, which want to enter new markets, may especially suffer from shortages regarding finance. A European Code of Conduct between Banks and SMEs would have allowed at least more transparency in the relations between Banks and SMEs and UEAPME regrets that the bank sector was not able to agree on such a commitment.Towards an encompassing policy approach to improve the access of Crafts, Trades and SMEs to financeAll analyses show that credits and loans will stay the main source of finance for the SME sector in Europe. Access to finance was always a main concern for SMEs, but the recent developments in the finance sector worsen the situation even more.Shortage of finance is already a relevant factor, which hinders economic recovery in Europe. Many SMEs are not able to finance their needs for investment.Therefore, UEAPME expects the new European Commission and the new European Parliament to strengthen their efforts to improve the framework conditions for SME finance. Europe’s Crafts, Trades and SMEs ask for an encompassing policy approach, which includes not only the conditions for SMEs’ access to l ending, but will also strengthen their capacity for internal finance and their access to external risk capital.From UEAPME’s point of view such an encompassing approach should be based on three guiding principles:•Risk-sharing between private investors, financial institutes, SMEs and public sector;•Increase of transparency of SMEs towards their external investors and lenders;•improving the regulatory environment for SME finance.Based on these principles and against the background of the changing environment for SME finance, UEAPME proposes policy measures in the following areas:1. New Capital Requirement Directive: SME friendly implementation of Basel IIDue to intensive lobbying activities, UEAPME, together with other Business Associations in Europe, has achieved some improvements in favour of SMEs regarding the new Basel Agreement on regulatory capital (Basel II). The final agreement from the Basel Committee contains a much more realistic approach toward the real risk situation of SME lending for the finance market and will allow the necessary room for adaptations, which respect the different regional traditions and institutional structures.However, the new regulatory system will influence the relations between Banks and SMEs and it will depend very much on the way it will be implemented into European law, whether Basel II becomes burdensome for SMEs and if it will reduce access to finance for them.The new Capital Accord form the Basel Committee gives the financial market authorities and herewith the European Institutions, a lot of flexibility. In about 70 areas they have room to adapt the Accord to their specific needs when implementing itinto EU law. Some of them will have important effects on the costs and the accessibility of finance for SMEs.UEAPME expects therefore from the new European Commission and the new European Parliament:•The implementation of the new Capital Requirement Directive will be costly for the Finance Sector (up to 30 Billion Euro till 2006) and its clients will have to pay for it. Therefore, the implementation – especially for smaller banks, which are often very active in SME finance –has to be carried out with as little administrative burdensome as possible (reporting obligations, statistics, etc.).•The European Regulators must recognize traditional instruments for collaterals (guarantees, etc.) as far as possible.•The European Commission and later the Member States should take over the recommendations from the European Parliament with regard to granularity, access to retail portfolio, maturity, partial use, adaptation of thresholds, etc., which will ease the burden on SME finance.2. SMEs need transparent rating proceduresDue to higher risk awareness of the finance sector and the needs of Basel II, many SMEs will be confronted for the first time with internal rating procedures or credit scoring systems by their banks. The bank will require more and better quality information from their clients and will assess them in a new way. Both up-coming developments are already causing increasing uncertainty amongst SMEs.In order to reduce this uncertainty and to allow SMEs to understand the principles of the new risk assessment, UEAPME demands transparent rating procedures –rating procedures may not become a “Black Box” for SMEs: •The bank should communicate the relevant criteria affecting the rating of SMEs.•The bank should inform SMEs about its assessment in order to allow SMEs to improve.The negotiations on a European Code of Conduct between Banks and SMEs , which would have included a self-commitment for transparent rating procedures by Banks, failed. Therefore, UEAPME expects from the new European Commission and the new European Parliament support for:•binding rules in the framework of the new Capital Adequacy Directive,which ensure the transparency of rating procedures and credit scoring systems for SMEs;•Elaboration of national Codes of Conduct in order to improve the relations between Banks and SMEs and to support the adaptation of SMEs to the new financial environment.3. SMEs need an extension of credit guarantee systems with a special focus on Micro-LendingBusiness start-ups, the transfer of businesses and innovative fast growth SMEs also depended in the past very often on public support to get access to finance. Increasing risk awareness by banks and the stricter interpretation of State Aid Rules will further increase the need for public support.Already now, there are credit guarantee schemes in many countries on the limit of their capacity and too many investment projects cannot be realized by SMEs.Experiences show that Public money, spent for supporting credit guarantees systems, is a very efficient instrument and has a much higher multiplying effect than other instruments. One Euro form the European Investment Funds can stimulate 30 Euro investments in SMEs (for venture capital funds the relation is only 1:2).Therefore, UEAPME expects the new European Commission and the new European Parliament to support:•The extension of funds for national credit guarantees schemes in the framework of the new Multi-Annual Programmed for Enterprises;•The development of new instruments for securitizations of SME portfolios;•The recognition of existing and well functioning credit guarantees schemes as collateral;•More flexibility within the European Instruments, because of national differences in the situation of SME finance;•The development of credit guarantees schemes in the new Member States;•The development of an SBIC-like scheme in the Member States to close the equity gap (0.2 – 2.5 Mio Euro, according to the expert meeting on PACE on April 27 in Luxemburg).•the development of a financial support scheme to encourage the internalizations of SMEs (currently there is no scheme available at EU level: termination of JOP, fading out of JEV).4. SMEs need company and income taxation systems, whichstrengthen their capacity for self-financingMany EU Member States have company and income taxation systems with negative incentives to build-up capital within the company by re-investing their profits. This is especially true for companies, which have to pay income taxes. Already in the past tax-regimes was one of the reasons for the higher dependence of Europe’s SMEs on bank lending. In future, the result of rating w ill also depend on the amount of capital in the company; the high dependence on lending will influence the access to lending. This is a vicious cycle, which has to be broken.Even though company and income taxation falls under the competence of Member States, UEAPME asks the new European Commission and the new European Parliament to publicly support tax-reforms, which will strengthen the capacity of Crafts, Trades and SME for self-financing. Thereby, a special focus on non-corporate companies is needed.5. Risk Capital – equity financingExternal equity financing does not have a real tradition in the SME sector. On the one hand, small enterprises and family business in general have traditionally not been very open towards external equity financing and are not used to informing transparently about their business.On the other hand, many investors of venture capital and similar forms of equity finance are very reluctant regarding investing their funds in smaller companies, which is more costly than investing bigger amounts in larger companies. Furthermore it is much more difficult to set out of such investments in smaller companies.Even though equity financing will never become the main source of financing for SMEs, it is an important instrument for highly innovative start-ups and fast growing companies and it has therefore to be further developed. UEAPME sees three pillars for such an approach where policy support is needed:Availability of venture capital•The Member States should review their taxation systems in order to create incentives to invest private money in all forms of venture capital.•Guarantee instruments for equity financing should be further developed.Improve the conditions for investing venture capital into SMEs•The development of secondary markets for venture capital investments in SMEs should be supported.•Accounting Standards for SMEs should be revised in order to easetransparent exchange of information between investor and owner-manager.Owner-managers must become more aware about the need for transparency towards investors•SME owners will have to realise that in future access to external finance (venture capital or lending) will depend much more on a transparent and open exchange of information about the situation and the perspectives of their companies.•In order to fulfil the new needs for transparency, SMEs will have to use new information instruments (business plans, financial reporting, etc.) and new management instruments (risk-management, financial management, etc.).外文资料翻译涂敏之会计学 8051208076题目：未来的中小企业融资背景：中小企业融资已经改变未来的经济复苏将取决于能否工艺品，贸易和中小企业利用其潜在的增长和创造就业。

软件工程专业毕业设计外文文献翻译1000字本文将就软件工程专业毕业设计的外文文献进行翻译，能够为相关考生提供一定的参考。

外文文献1: Software Engineering Practices in Industry: A Case StudyAbstractThis paper reports a case study of software engineering practices in industry. The study was conducted with a large US software development company that produces software for aerospace and medical applications. The study investigated the company’s software development process, practices, and techniques that lead to the production of quality software. The software engineering practices were identified through a survey questionnaire and a series of interviews with the company’s software development managers, software engineers, and testers. The research found that the company has a well-defined software development process, which is based on the Capability Maturity Model Integration (CMMI). The company follows a set of software engineering practices that ensure quality, reliability, and maintainability of the software products. The findings of this study provide a valuable insight into the software engineering practices used in industry and can be used to guide software engineering education and practice in academia.IntroductionSoftware engineering is the discipline of designing, developing, testing, and maintaining software products. There are a number of software engineering practices that are used in industry to ensure that software products are of high quality, reliable, and maintainable. These practices include software development processes, software configuration management, software testing, requirements engineering, and project management. Software engineeringpractices have evolved over the years as a result of the growth of the software industry and the increasing demands for high-quality software products. The software industry has developed a number of software development models, such as the Capability Maturity Model Integration (CMMI), which provides a framework for software development organizations to improve their software development processes and practices.This paper reports a case study of software engineering practices in industry. The study was conducted with a large US software development company that produces software for aerospace and medical applications. The objective of the study was to identify the software engineering practices used by the company and to investigate how these practices contribute to the production of quality software.Research MethodologyThe case study was conducted with a large US software development company that produces software for aerospace and medical applications. The study was conducted over a period of six months, during which a survey questionnaire was administered to the company’s software development managers, software engineers, and testers. In addition, a series of interviews were conducted with the company’s software development managers, software engineers, and testers to gain a deeper understanding of the software engineering practices used by the company. The survey questionnaire and the interview questions were designed to investigate the software engineering practices used by the company in relation to software development processes, software configuration management, software testing, requirements engineering, and project management.FindingsThe research found that the company has a well-defined software development process, which is based on the Capability Maturity Model Integration (CMMI). The company’s software development process consists of five levels of maturity, starting with an ad hoc process (Level 1) and progressing to a fully defined and optimized process (Level 5). The company has achieved Level 3 maturity in its software development process. The company follows a set of software engineering practices that ensure quality, reliability, and maintainability of the software products. The software engineering practices used by the company include:Software Configuration Management (SCM): The company uses SCM tools to manage software code, documentation, and other artifacts. The company follows a branching and merging strategy to manage changes to the software code.Software Testing: The company has adopted a formal testing approach that includes unit testing, integration testing, system testing, and acceptance testing. The testing process is automated where possible, and the company uses a range of testing tools.Requirements Engineering: The company has a well-defined requirements engineering process, which includes requirements capture, analysis, specification, and validation. The company uses a range of tools, including use case modeling, to capture and analyze requirements.Project Management: The company has a well-defined project management process that includes project planning, scheduling, monitoring, and control. The company uses a range of tools to support project management, including project management software, which is used to track project progress.ConclusionThis paper has reported a case study of software engineering practices in industry. The study was conducted with a large US software development company that produces software for aerospace and medical applications. The study investigated the company’s software development process,practices, and techniques that lead to the production of quality software. The research found that the company has a well-defined software development process, which is based on the Capability Maturity Model Integration (CMMI). The company uses a set of software engineering practices that ensure quality, reliability, and maintainability of the software products. The findings of this study provide a valuable insight into the software engineering practices used in industry and can be used to guide software engineering education and practice in academia.外文文献2: Agile Software Development: Principles, Patterns, and PracticesAbstractAgile software development is a set of values, principles, and practices for developing software. The Agile Manifesto represents the values and principles of the agile approach. The manifesto emphasizes the importance of individuals and interactions, working software, customer collaboration, and responding to change. Agile software development practices include iterative development, test-driven development, continuous integration, and frequent releases. This paper presents an overview of agile software development, including its principles, patterns, and practices. The paper also discusses the benefits and challenges of agile software development.IntroductionAgile software development is a set of values, principles, and practices for developing software. Agile software development is based on the Agile Manifesto, which represents the values and principles of the agile approach. The manifesto emphasizes the importance of individuals and interactions, working software, customer collaboration, and responding to change. Agile software development practices include iterative development, test-driven development, continuous integration, and frequent releases.Agile Software Development PrinciplesAgile software development is based on a set of principles. These principles are:Customer satisfaction through early and continuous delivery of useful software.Welcome changing requirements, even late in development. Agile processes harness change for the customer's competitive advantage.Deliver working software frequently, with a preference for the shorter timescale.Collaboration between the business stakeholders and developers throughout the project.Build projects around motivated individuals. Give them the environment and support they need, and trust them to get the job done.The most efficient and effective method of conveying information to and within a development team is face-to-face conversation.Working software is the primary measure of progress.Agile processes promote sustainable development. The sponsors, developers, and users should be able to maintain a constant pace indefinitely.Continuous attention to technical excellence and good design enhances agility.Simplicity – the art of maximizing the amount of work not done – is essential.The best architectures, requirements, and designs emerge from self-organizing teams.Agile Software Development PatternsAgile software development patterns are reusable solutions to common software development problems. The following are some typical agile software development patterns:The Single Responsibility Principle (SRP)The Open/Closed Principle (OCP)The Liskov Substitution Principle (LSP)The Dependency Inversion Principle (DIP)The Interface Segregation Principle (ISP)The Model-View-Controller (MVC) PatternThe Observer PatternThe Strategy PatternThe Factory Method PatternAgile Software Development PracticesAgile software development practices are a set ofactivities and techniques used in agile software development. The following are some typical agile software development practices:Iterative DevelopmentTest-Driven Development (TDD)Continuous IntegrationRefactoringPair ProgrammingAgile Software Development Benefits and ChallengesAgile software development has many benefits, including:Increased customer satisfactionIncreased qualityIncreased productivityIncreased flexibilityIncreased visibilityReduced riskAgile software development also has some challenges, including:Requires discipline and trainingRequires an experienced teamRequires good communicationRequires a supportive management cultureConclusionAgile software development is a set of values, principles, and practices for developing software. Agile software development is based on the Agile Manifesto, which represents the values and principles of the agile approach. Agile software development practices include iterative development, test-driven development, continuous integration, and frequent releases. Agile software development has many benefits, including increased customer satisfaction, increased quality, increased productivity, increased flexibility, increased visibility, and reduced risk. Agile software development also has some challenges, including the requirement for discipline and training, the requirement for an experienced team, the requirement for good communication, and the requirement for a supportive management culture.。

外文资料原文涂敏之会计学 8051208076Title:Future of SME finance（/docs/pos_papers/2004/041027_SME-finance_final.do c）Background – the environment for SME finance has changedFuture economic recovery will depend on the possibility of Crafts, Trades and SMEs to exploit their potential for growth and employment creation.SMEs make a major contribution to growth and employment in the EU and are at the heart of the Lisbon Strategy, whose main objective is to turn Europe into the most competitive and dynamic knowledge-based economy in the world. However, the ability of SMEs to grow depends highly on their potential to invest in restructuring, innovation and qualification. All of these investments need capital and therefore access to finance.Against this background the consistently repeated complaint of SMEs about their problems regarding access to finance is a highly relevant constraint that endangers the economic recovery of Europe.Changes in the finance sector influence the behavior of credit institutes towards Crafts, Trades and SMEs. Recent and ongoing developments in the banking sector add to the concerns of SMEs and will further endanger their access to finance. The main changes in the banking sector which influence SME finance are:•Globalization and internationalization have increased the competition and the profit orientation in the sector;•worsening of the economic situations in some institutes (burst of the ITC bubble, insolvencies) strengthen the focus on profitability further;•Mergers and restructuring created larger structures and many local branches, which had direct and personalized contacts with small enterprises, were closed;•up-coming implementation of new capital adequacy rules (Basel II) will also change SME business of the credit sector and will increase its administrative costs;•Stricter interpretation of State-Aide Rules by the European Commission eliminates the support of banks by public guarantees; many of the effected banks are very active in SME finance.All these changes result in a higher sensitivity for risks and profits in the finance sector.The changes in the finance sector affect the accessibility of SMEs to finance.Higher risk awareness in the credit sector, a stronger focus on profitability and the ongoing restructuring in the finance sector change the framework for SME finance and influence the accessibility of SMEs to finance. The most important changes are: •In order to make the higher risk awareness operational, the credit sector introduces new rating systems and instruments for credit scoring;•Risk assessment of SMEs by banks will force the enterprises to present more and better quality information on their businesses;•Banks will try to pass through their additional costs for implementing and running the new capital regulations (Basel II) to their business clients;•due to the increase of competition on interest rates, the bank sector demands more and higher fees for its services (administration of accounts, payments systems, etc.), which are not only additional costs for SMEs but also limit their liquidity;•Small enterprises will lose their personal relationship with decision-makers in local branches –the credit application process will become more formal and anonymous and will probably lose longer;•the credit sector will lose more and more its “public function” to provide access to finance for a wide range of economic actors, which it has in a number of countries, in order to support and facilitate economic growth; the profitability of lending becomes the main focus of private credit institutions.All of these developments will make access to finance for SMEs even more difficult and / or will increase the cost of external finance. Business start-ups and SMEs, which want to enter new markets, may especially suffer from shortages regarding finance. A European Code of Conduct between Banks and SMEs would have allowed at least more transparency in the relations between Banks and SMEs and UEAPME regrets that the bank sector was not able to agree on such a commitment.Towards an encompassing policy approach to improve the access of Crafts, Trades and SMEs to financeAll analyses show that credits and loans will stay the main source of finance for the SME sector in Europe. Access to finance was always a main concern for SMEs,but the recent developments in the finance sector worsen the situation even more. Shortage of finance is already a relevant factor, which hinders economic recovery in Europe. Many SMEs are not able to finance their needs for investment.Therefore, UEAPME expects the new European Commission and the new European Parliament to strengthen their efforts to improve the framework conditions for SME finance. Europe’s Crafts, Trades and SMEs ask for an encompassing policy approach, which includes not only the conditions for SMEs’ access to lending, but will also strengthen their capacity for internal finance and their access to external risk capital.From UEAPM E’s point of view such an encompassing approach should be based on three guiding principles:•Risk-sharing between private investors, financial institutes, SMEs and public sector;•Increase of transparency of SMEs towards their external investors and lenders;•improving the regulatory environment for SME finance.Based on these principles and against the background of the changing environment for SME finance, UEAPME proposes policy measures in the following areas:1. New Capital Requirement Directive: SME friendly implementation of Basel IIDue to intensive lobbying activities, UEAPME, together with other Business Associations in Europe, has achieved some improvements in favour of SMEs regarding the new Basel Agreement on regulatory capital (Basel II). The final agreement from the Basel Committee contains a much more realistic approach toward the real risk situation of SME lending for the finance market and will allow the necessary room for adaptations, which respect the different regional traditions and institutional structures.However, the new regulatory system will influence the relations between Banks and SMEs and it will depend very much on the way it will be implemented into European law, whether Basel II becomes burdensome for SMEs and if it will reduce access to finance for them.The new Capital Accord form the Basel Committee gives the financial market authorities and herewith the European Institutions, a lot of flexibility. In about 70areas they have room to adapt the Accord to their specific needs when implementing it into EU law. Some of them will have important effects on the costs and the accessibility of finance for SMEs.UEAPME expects therefore from the new European Commission and the new European Parliament:•The implementation of the new Capital Requirement Directive will be costly for the Finance Sector (up to 30 Billion Euro till 2006) and its clients will have to pay for it. Therefore, the implementation – especially for smaller banks, which are often very active in SME finance –has to be carried out with as little administrative burdensome as possible (reporting obligations, statistics, etc.).•The European Regulators must recognize traditional instruments for collaterals (guarantees, etc.) as far as possible.•The European Commission and later the Member States should take over the recommendations from the European Parliament with regard to granularity, access to retail portfolio, maturity, partial use, adaptation of thresholds, etc., which will ease the burden on SME finance.2. SMEs need transparent rating proceduresDue to higher risk awareness of the finance sector and the needs of Basel II, many SMEs will be confronted for the first time with internal rating procedures or credit scoring systems by their banks. The bank will require more and better quality information from their clients and will assess them in a new way. Both up-coming developments are already causing increasing uncertainty amongst SMEs.In order to reduce this uncertainty and to allow SMEs to understand the principles of the new risk assessment, UEAPME demands transparent rating procedures –rating procedures may not become a “Black Box” for SMEs:•The bank should communicate the relevant criteria affecting the rating of SMEs.•The bank should inform SMEs about its assessment in order to allow SMEs to improve.The negotiations on a European Code of Conduct between Banks and SMEs , which would have included a self-commitment for transparent rating procedures by Banks, failed. Therefore, UEAPME expects from the new European Commission and the new European Parliament support for:•binding rules in the framework of the new Capital Adequacy Directive, which ensure the transparency of rating procedures and credit scoring systems for SMEs;•Elaboration of national Codes of Conduct in order to improve the relations between Banks and SMEs and to support the adaptation of SMEs to the new financial environment.3. SMEs need an extension of credit guarantee systems with a special focus on Micro-LendingBusiness start-ups, the transfer of businesses and innovative fast growth SMEs also depended in the past very often on public support to get access to finance. Increasing risk awareness by banks and the stricter interpretation of State Aid Rules will further increase the need for public support.Already now, there are credit guarantee schemes in many countries on the limit of their capacity and too many investment projects cannot be realized by SMEs.Experiences show that Public money, spent for supporting credit guarantees systems, is a very efficient instrument and has a much higher multiplying effect than other instruments. One Euro form the European Investment Funds can stimulate 30 Euro investments in SMEs (for venture capital funds the relation is only 1:2).Therefore, UEAPME expects the new European Commission and the new European Parliament to support:•The extension of funds for national credit guarantees schemes in the framework of the new Multi-Annual Programmed for Enterprises;•The development of new instruments for securitizations of SME portfolios;•The recognition of existing and well functioning credit guarantees schemes as collateral;•More flexibility within the European Instruments, because of national differences in the situation of SME finance;•The development of credit guarantees schemes in the new Member States;•The development of an SBIC-like scheme in the Member States to close the equity gap (0.2 – 2.5 Mio Euro, according to the expert meeting on PACE on April 27 in Luxemburg).•the development of a financial support scheme to encourage the internalizations of SMEs (currently there is no scheme available at EU level: termination of JOP, fading out of JEV).4. SMEs need company and income taxation systems, which strengthen their capacity for self-financingMany EU Member States have company and income taxation systems with negative incentives to build-up capital within the company by re-investing their profits. This is especially true for companies, which have to pay income taxes. Already in the past tax-regimes was one of the reasons for the higher dependence of Europe’s SMEs on bank lending. In future, the result of rating will also depend on the amount of capital in the company; the high dependence on lending will influence the access to lending. This is a vicious cycle, which has to be broken.Even though company and income taxation falls under the competence of Member States, UEAPME asks the new European Commission and the new European Parliament to publicly support tax-reforms, which will strengthen the capacity of Crafts, Trades and SME for self-financing. Thereby, a special focus on non-corporate companies is needed.5. Risk Capital – equity financingExternal equity financing does not have a real tradition in the SME sector. On the one hand, small enterprises and family business in general have traditionally not been very open towards external equity financing and are not used to informing transparently about their business.On the other hand, many investors of venture capital and similar forms of equity finance are very reluctant regarding investing their funds in smaller companies, which is more costly than investing bigger amounts in larger companies. Furthermore it is much more difficult to set out of such investments in smaller companies.Even though equity financing will never become the main source of financing for SMEs, it is an important instrument for highly innovative start-ups and fast growing companies and it has therefore to be further developed. UEAPME sees three pillars for such an approach where policy support is needed:Availability of venture capital•The Member States should review their taxation systems in order to create incentives to invest private money in all forms of venture capital.•Guarantee instruments for equity financing should be further developed.Improve the conditions for investing venture capital into SMEs•The development of secondary markets for venture capital investments in SMEs should be supported.•Accounting Standards for SMEs should be revised in order to ease transparent exchange of information between investor and owner-manager.Owner-managers must become more aware about the need for transparency towards investors•SME owners will have to realise that in future access to external finance (venture capital or lending) will depend much more on a transparent and open exchange of information about the situation and the perspectives of their companies.•In order to fulfil the new needs for transparency, SMEs will have to use new information instruments (business plans, financial reporting, etc.) and new management instruments (risk-management, financial management, etc.).外文资料翻译涂敏之会计学 8051208076题目：未来的中小企业融资背景：中小企业融资已经改变未来的经济复苏将取决于能否工艺品，贸易和中小企业利用其潜在的增长和创造就业。

forced concrete structure reinforced with anoverviewReinSince the reform and opening up, with the national economy's rapid and sustained development of a reinforced concrete structure built, reinforced with the development of technology has been great. Therefore, to promote the use of advanced technology reinforced connecting to improve project quality and speed up the pace of construction, improve labor productivity, reduce costs, and is of great significance.Reinforced steel bars connecting technologies can be divided into two broad categories linking welding machinery and steel. There are six types of welding steel welding methods, and some apply to the prefabricated plant, and some apply to the construction site, some of both apply. There are three types of machinery commonly used reinforcement linking method primarily applicable to the construction site. Ways has its own characteristics and different application, and in the continuous development and improvement. In actual production, should be based on specific conditions of work, working environment and technical requirements, the choice of suitable methods to achieve the best overall efficiency.1、steel mechanical link1.1 radial squeeze linkWill be a steel sleeve in two sets to the highly-reinforced Department with superhigh pressure hydraulic equipment (squeeze tongs) along steel sleeve radial squeeze steel casing, in squeezing out tongs squeeze pressure role of a steel sleeve plasticity deformation closely integrated with reinforced through reinforced steel sleeve and Wang Liang's Position will be two solid steel bars linkedCharacteristic: Connect intensity to be high, performance reliable, can bear high stress draw and pigeonhole the load and tired load repeatedly.Easy and simple to handle, construction fast, save energy and material, comprehensive economy profitable, this method has been already a large amount of application in the project.Applicable scope : Suitable for Ⅱ, Ⅲ, Ⅳgrade reinforcing bar (including welding bad reinfor cing bar ) with ribbing of Ф 18- 50mm, connection between the same diameter or different diameters reinforcing bar .1.2must squeeze linkExtruders used in the covers, reinforced axis along the cold metal sleeve squeeze dedicated to insert sleeve Lane two hot rolling steel drums into a highly integrated mechanical linking methods.Characteristic: Easy to operate and joining fast and not having flame homework , can construct for 24 hours , save a large number of reinforcing bars and energy. Applicable scope : Suitable for , set up according to first and second class antidetonation requirement -proof armored concrete structure ФⅡ, Ⅲgrade reinforcing bar with ribbing of hot rolling of 20- 32mm join and construct live.1.3 cone thread connectingUsing cone thread to bear pulled, pressed both effort and self-locking nature, undergo good principles will be reinforced by linking into cone-processing thread at the moment the value of integration into the joints connecting steel bars.Characteristic: Simple , all right preparatory cut of the craft , connecting fast, concentricity is good, have pattern person who restrain from advantage reinforcing bar carbon content.Applicable scope : Suitable for the concrete structure of the industry , civil buil ding and general structures, reinforcing bar diameter is for Фfor the the 16- 40mm one Ⅱ, Ⅲgrade verticality, it is the oblique to or reinforcing bars horizontal join construct live.conclusionsThese are now commonly used to connect steel synthesis methods, which links technology in the United States, Britain, Japan and other countries are widely used. There are different ways to connect their different characteristics and scope of the actual construction of production depending on the specific project choose a suitable method of connecting to achieve both energy conservation and saving time limit for a project ends.钢筋混凝土构造中钢筋连接综述改革开放以来，伴随国民经济旳迅速、持久发展，多种钢筋混凝土建筑构造大量建造，钢筋连接技术得到很大旳发展。

材料科学专业毕业设计外文文献及翻译文献摘要为了适应不断发展的材料科学领域，毕业设计需要参考一些权威的外文文献。

在这里，我们提供了一些与材料科学专业相关的外文文献，并附带简要翻译。

---文献1: "石墨烯在材料科学中的应用"作者: John Smith, Mary Johnson: John Smith, Mary Johnson摘要::本文综述了石墨烯在材料科学中的应用。

石墨烯是一种单层碳原子结构，具有独特的物理和化学性质。

我们讨论了石墨烯的制备方法、其在电子学、能源存储和生物医学领域中的应用。

石墨烯在材料科学中具有巨大的潜力，可以为未来的材料研究和应用开辟新的道路。

---文献2: "纳米材料的合成与性能研究"作者: David Brown, Emma Lee: David Brown, Emma Lee摘要::本文讨论了纳米材料的合成方法及其性能研究。

纳米材料是具有纳米尺度结构的材料，具有与宏观材料不同的性质。

我们介绍了几种常见的纳米材料合成方法，例如溶液法和气相法，并讨论了纳米材料的晶体结构、表面性质和力学性能。

研究纳米材料的性能对材料科学的发展和应用具有重要意义。

---文献3: "高温合金的热稳定性研究"作者: Jennifer Zhang, Michael Wang: Jennifer Zhang, Michael Wang摘要::本文研究了高温合金的热稳定性。

高温合金是一种用于高温环境的特殊材料，具有优异的耐热性能。

我们通过实验研究了高温合金的热膨胀性、热导率和高温力学性能。

通过了解高温合金的热稳定性，我们可以提高材料的耐高温性能，从而推动高温环境下的应用和工程技术发展。

---以上是几篇关于材料科学的外文文献摘要及简要翻译，希望对毕业设计的参考有所助益。

毕业论文外文文献及翻译毕业论文外文文献及翻译在撰写毕业论文的过程中，外文文献的引用和翻译是不可或缺的一部分。

外文文献的引用可以增加论文的可信度和学术性，而翻译则是将外文文献的内容转化为母语读者所能理解的形式。

本文将探讨毕业论文中外文文献的引用和翻译的重要性，并提供一些建议和技巧。

首先，外文文献的引用对于毕业论文的写作至关重要。

引用外文文献可以为论文提供更多的证据和支持，增强论文的可信度。

在引用外文文献时，需要确保文献的来源可靠，作者权威，内容与论文主题相关。

此外，引用外文文献还可以展示作者对国际学术研究的关注和理解，提升论文的学术性。

然而，引用外文文献并不意味着直接复制粘贴原文内容。

在论文中，外文文献的内容需要进行翻译，以确保读者能够理解和接受。

翻译外文文献需要一定的技巧和方法。

首先，翻译者需要确保准确理解原文的意思。

对于一些专业术语和学术用语，可以通过查阅专业词典或咨询专业人士来获得准确的翻译。

其次，翻译时需要注意语言的准确性和流畅性。

翻译应该符合母语读者的语言习惯和表达方式，使得读者能够顺畅地理解文献内容。

最后，翻译后的文献内容应该与论文的整体风格和语言风格保持一致，避免出现突兀的翻译。

在引用外文文献和翻译时，研究者还应该注意一些细节。

首先，引用外文文献时需要标注出处和页码，以便读者查阅原文。

其次，在引用外文文献时可以使用引文的方式，即将原文内容放在引号中，并注明作者和出处。

这样可以明确区分原文和翻译内容，避免产生版权纠纷。

另外，翻译后的文献内容应该与论文的整体结构和逻辑相符，不应该脱离论文的主题和论证。

在进行外文文献的引用和翻译时，还可以借助一些工具和资源。

首先，可以使用文献管理软件来管理和引用外文文献。

这些软件可以帮助研究者整理和管理大量的文献资料，并自动生成引用格式。

其次，可以使用在线翻译工具来辅助翻译。

然而，需要注意的是，机器翻译并不完美，可能存在一些语义和语法错误。

因此，研究者在使用机器翻译时需要仔细校对和修正翻译结果。

文学作品中英文对照外文翻译文献
本文旨在汇总文学作品中的英文和中文对照外文翻译文献，共有以下几篇：
1. 《傲慢与偏见》
翻译：英文原版名为“Pride and Prejudice”，中文版由钱钟书翻译。

该小说是英国作家简.奥斯汀的代表作之一，描绘了19世纪英国中上层社会的生活和爱情故事。

2. 《了不起的盖茨比》
翻译：英文原版名为“The Great Gatsby”，中文版由杨绛翻译。

小说主要讲述了一个居住在纽约长岛的年轻白领盖茨比为了追求他的旧爱黛西而付出的努力，是20世纪美国文学的经典之作。

3. 《麦田里的守望者》
翻译：英文原版名为“The Catcher in the Rye”，中文版由施蛰存翻译。

该小说主人公霍尔顿是美国现代文学中最为知名的反英雄形象之一，作品深刻地揭示了青少年内心的孤独和矛盾。

4. 《1984》
翻译：英文原版名为“1984”，中文版由李敬瑞翻译。

该小说是英国作家乔治.奥威尔的代表作之一，描绘了一个虚构的极权主义社会。

以上是部分文学作品的中英文对照外文翻译文献，可以帮助读者更好地理解和学习相关文学作品。

外文文献翻译原文Analysis of Con tin uous Prestressed Concrete BeamsChris BurgoyneMarch 26, 20051、IntroductionThis conference is devoted to the development of structural analysis rather than the strength of materials, but the effective use of prestressed concrete relies on an appropriate combination of structural analysis techniques with knowledge of the material behaviour. Design of prestressed concrete structures is usually left to specialists; the unwary will either make mistakes or spend inordinate time trying to extract a solution from the various equations.There are a number of fundamental differences between the behaviour of prestressed concrete and that of other materials. Structures are not unstressed when unloaded; the design space of feasible solutions is totally bounded；in hyperstatic structures, various states of self-stress can be induced by altering the cable profile, and all of these factors get influenced by creep and thermal effects. How were these problems recognised and how have they been tackled?Ever since the development of reinforced concrete by Hennebique at the end of the 19th century (Cusack 1984), it was recognised that steel and concrete could be more effectively combined if the steel was pretensioned, putting the concrete into compression. Cracking could be reduced, if not prevented altogether, which would increase stiffness and improve durability. Early attempts all failed because the initial prestress soon vanished, leaving the structure to be- have as though it was reinforced; good descriptions of these attempts are given by Leonhardt (1964) and Abeles (1964).It was Freyssineti’s observations of the sagging of the shallow arches on three bridges that he had just completed in 1927 over the River Allier near Vichy which led directly to prestressed concrete (Freyssinet 1956). Only the bridge at Boutiron survived WWII (Fig 1). Hitherto, it had been assumed that concrete had a Young’s modulus which remained fixed, but he recognised that the de- ferred strains due to creep explained why the prestress had been lost in the early trials. Freyssinet (Fig. 2) also correctly reasoned that high tensile steel had to be used, so that some prestress would remain after the creep had occurred, and alsothat high quality concrete should be used, since this minimised the total amount of creep. The history of Freyssineti’s early prestressed concrete work is written elsewhereFigure1:Boutiron Bridge,Vic h yFigure 2: Eugen FreyssinetAt about the same time work was underway on creep at the BRE laboratory in England ((Glanville 1930) and (1933)). It is debatable which man should be given credit for the discovery of creep but Freyssinet clearly gets the credit for successfully using the knowledge to prestress concrete.There are still problems associated with understanding how prestressed concrete works, partly because there is more than one way of thinking about it. These different philosophies are to some extent contradictory, and certainly confusing to the young engineer. It is also reflected, to a certain extent, in the various codes of practice.Permissible stress design philosophy sees prestressed concrete as a way of avoiding cracking by eliminating tensile stresses; the objective is for sufficient compression to remain after creep losses. Untensionedreinforcement, which attracts prestress due to creep, is anathema. This philosophy derives directly from Freyssinet’s logic and is primarily a working stress concept.Ultimate strength philosophy sees prestressing as a way of utilising high tensile steel as reinforcement. High strength steels have high elastic strain capacity, which could not be utilised when used as reinforcement; if the steel is pretensioned, much of that strain capacity is taken out before bonding the steel to the concrete. Structures designed this way are normally designed to be in compression everywhere under permanent loads, but allowed to crack under high live load. The idea derives directly from the work of Dischinger (1936) and his work on the bridge at Aue in 1939 (Schonberg and Fichter 1939), as well as that of Finsterwalder (1939). It is primarily an ultimate load concept. The idea of partial prestressing derives from these ideas.The Load-Balancing philosophy, introduced by T.Y. Lin, uses prestressing to counter the effect of the permanent loads (Lin 1963). The sag of the cables causes an upward force on the beam, which counteracts the load on the beam. Clearly, only one load can be balanced, but if this is taken as the total dead weight, then under that load the beam will perceive only the net axial prestress and will have no tendency to creep up or down.These three philosophies all have their champions, and heated debates take place between them as to which is the most fundamental.2、Section designFrom the outset it was recognised that prestressed concrete has to be checked at both the working load and the ultimate load. For steel structures, and those made from reinforced concrete, there is a fairly direct relationship between the load capacity under an allowable stress design, and that at the ultimate load under an ultimate strength design. Older codes were based on permissible stresses at the working load; new codes use moment capacities at the ultimate load. Different load factors are used in the two codes, but a structure which passes one code is likely to be acceptable under the other.For prestressed concrete, those ideas do not hold, since the structure is highly stressed, even when unloaded. A small increase of load can cause some stress limits to be breached, while a large increase in load might be needed to cross other limits. The designer has considerable freedom to vary both the working load and ultimate load capacities independently; both need to be checked.A designer normally has to check the tensile and compressive stresses, in both the top and bottom fibre of the section, for every load case. The critical sections are normally, but not always, the mid-span and the sections over piers but other sections may become critical ，when the cable profile has to be determined.The stresses at any position are made up of three components, one of which normally has a different sign from the other two; consistency of sign convention is essential.If P is the prestressing force and e its eccentricity, A and Z are the area of the cross-section and its elastic section modulus, while M is the applied moment, then where ft and fc are the permissible stresses in tension and compression.c e t f ZM Z P A P f ≤-+≤Thus, for any combination of P and M , the designer already has four in- equalities to deal with.The prestressing force differs over time, due to creep losses, and a designer isusually faced with at least three combinations of prestressing force and moment;• the applied moment at the time the prestress is first applied, before creep losses occur,• the maximum applied moment after creep losses, and• the minimum applied moment after creep losses.Figure 4: Gustave MagnelOther combinations may be needed in more complex cases. There are at least twelve inequalities that have to be satisfied at any cross-section, but since an I-section can be defined by six variables, and two are needed to define the prestress, the problem is over-specified and it is not immediately obvious which conditions are superfluous. In the hands of inexperienced engineers, the design process can be very long-winded. However, it is possible to separate out the design of the cross-section from the design of the prestress. By considering pairs of stress limits on the same fibre, but for different load cases, the effects of the prestress can be eliminated, leaving expressions of the form:rangestress e Perm issibl Range Mom entZ These inequalities, which can be evaluated exhaustively with little difficulty, allow the minimum size of the cross-section to be determined.Once a suitable cross-section has been found, the prestress can be designed using a construction due to Magnel (Fig.4). The stress limits can all be rearranged into the form:()M fZ PA Z e ++-≤1 By plotting these on a diagram of eccentricity versus the reciprocal of the prestressing force, a series of bound lines will be formed. Provided the inequalities (2) are satisfied, these bound lines will always leave a zone showing all feasible combinations of P and e. The most economical design, using the minimum prestress, usually lies on the right hand side of the diagram, where the design is limited by the permissible tensile stresses.Plotting the eccentricity on the vertical axis allows direct comparison with the crosssection, as shown in Fig. 5. Inequalities (3) make no reference to the physical dimensions of the structure, but these practical cover limits can be shown as wellA good designer knows how changes to the design and the loadings alter the Magnel diagram. Changing both the maximum andminimum bending moments, but keeping the range the same, raises and lowers the feasible region. If the moments become more sagging the feasible region gets lower in the beam.In general, as spans increase, the dead load moments increase in proportion to the live load. A stage will be reached where the economic point (A on Fig.5) moves outside the physical limits of the beam; Guyon (1951a) denoted the limiting condition as the critical span. Shorter spans will be governed by tensile stresses in the two extreme fibres, while longer spans will be governed by the limiting eccentricity and tensile stresses in the bottom fibre. However, it does not take a large increase in moment ，at which point compressive stresses will govern in the bottom fibre under maximum moment.Only when much longer spans are required, and the feasible region moves as far down as possible, does the structure become governed by compressive stresses in both fibres.3、Continuous beamsThe design of statically determinate beams is relatively straightforward; the engineer can work on the basis of the design of individual cross-sections, as outlined above. A number of complications arise when the structure is indeterminate which means that the designer has to consider, not only a critical section,but also the behaviour of the beam as a whole. These are due to the interaction of a number of factors, such as Creep, Temperature effects and Construction Sequence effects. It is the development of these ideas whichforms the core of this paper. The problems of continuity were addressed at a conference in London (Andrew and Witt 1951). The basic principles, and nomenclature, were already in use, but to modern eyes concentration on hand analysis techniques was unusual, and one of the principle concerns seems to have been the difficulty of estimating losses of prestressing force.3.1 Secondary MomentsA prestressing cable in a beam causes the structure to deflect. Unlike the statically determinate beam, where this motion is unrestrained, the movement causes a redistribution of the support reactions which in turn induces additional moments. These are often termed Secondary Moments, but they are not always small, or Parasitic Moments, but they are not always bad.Freyssinet’s bridge across the Marne at Luzancy, started in 1941 but not completed until 1946, is often thought of as a simply supported beam, but it was actually built as a two-hinged arch (Harris 1986), with support reactions adjusted by means of flat jacks and wedges which were later grouted-in (Fig.6). The same principles were applied in the later and larger beams built over the same river.Magnel built the first indeterminate beam bridge at Sclayn, in Belgium (Fig.7) in 1946. The cables are virtually straight, but he adjusted the deck profile so that the cables were close to the soffit near mid-span. Even with straight cables the sagging secondary momentsare large; about 50% of the hogging moment at the central support caused by dead and live load.The secondary moments cannot be found until the profile is known but the cablecannot be designed until the secondary moments are known. Guyon (1951b) introduced the concept of the concordant profile, which is a profile that causes no secondary moments; es and ep thus coincide. Any line of thrust is itself a concordant profile.The designer is then faced with a slightly simpler problem; a cable profile has to be chosen which not only satisfies the eccentricity limits (3) but is also concordant. That in itself is not a trivial operation, but is helped by the fact that the bending moment diagram that results from any load applied to a beam will itself be a concordant profile for a cable of constant force. Such loads are termed notional loads to distinguish them from the real loads on the structure. Superposition can be used to progressively build up a set of notional loads whose bending moment diagram gives the desired concordant profile.3.2 Temperature effectsTemperature variations apply to all structures but the effect on prestressed concrete beams can be more pronounced than in other structures. The temperature profile through the depth of a beam (Emerson 1973) can be split into three components for the purposes of calculation (Hambly 1991). The first causes a longitudinal expansion, which is normally released by the articulation of the structure; the second causes curvature which leads to deflection in all beams and reactant moments in continuous beams, while the third causes a set of self-equilibrating set of stresses across the cross-section.The reactant moments can be calculated and allowed-for, but it is the self- equilibrating stresses that cause the main problems for prestressed concrete beams. These beams normally have high thermal mass which means that daily temperature variations do not penetrate to the core of the structure. The result is a very non-uniform temperature distribution across the depth which in turn leads to significant self-equilibrating stresses. If the core of the structure is warm, while the surface is cool, such as at night, then quite large tensile stresses can be developed on the top and bottom surfaces. However, they only penetrate a very short distance into the concrete and the potential crack width is very small. It can be very expensive to overcome the tensile stress by changing the section or the prestress。

Criminal Law1.General IntroductionCriminal law is the body of the law that defines criminal offenses, regulates the apprehension, charging, and trial of suspected offenders,and fixes punishment for convicted persons. Substantive criminal law defines particular crimes, and procedural law establishes rules for the prosecution of crime. In a democratic society, it is the function of the legislative bodies to decide what behavior will be made criminal and what penalties will be attached to violations of the law.Capital punishment may be imposed in some jurisdictions for the most serious crimes. And physical or corporal punishment may still be imposed such as whipping or caning, although these punishments are prohibited in much of the world. A convict may be incarcerated in prison or jail and the length of incarceration may vary from a day to life.Criminal law is a reflection of the society that produce it. In an Islamic theocracy, such as Iran, criminal law will reflect the religious teachings of the Koran; in an Catholic country, it will reflect the tenets of Catholicism. In addition, criminal law will change to reflect changes in society, especially attitude changes. For instance, use of marijuana was once considered a serious crime with harsh penalties, whereas today the penalties in most states are relatively light. As severity of the penaltieswas reduced. As a society advances, its judgments about crime and punishment change.2.Elements of a CrimeObviously, different crimes require different behaviors, but there are common elements necessary for proving all crimes. First, the prohibited behavior designated as a crime must be clearly defined so that a reasonable person can be forewarned that engaging in that behavior is illegal. Second, the accused must be shown to have possessed the requisite intent to commit the crime. Third, the state must prove causation. Finally, the state must prove beyond a reasonable doubt that the defendant committed the crime.(1) actus reusThe first element of crime is the actus reus.Actus is an act or action and reus is a person judicially accused of a crime. Therefore, actus reus is literally the action of a person accused of a crime. A criminal statute must clearly define exactly what act is deemed “guilty”---that is, the exact behavior that is being prohibited. That is done so that all persons are put on notice that if they perform the guilty act, they will be liable for criminal punishment. Unless the actus reus is clearly defined, one might not know whether or not on e’s behavior is illegal.Actus reus may be accomplished by an action, by threat of action,or exceptionally, by an omission to act, which is a legal duty to act. For example, the act of Cain striking Abel might suffice, or a parent’s failure to give to a young child also may provide the actus reus for a crime.Where the actus reus is a failure to act, there must be a duty of care. A duty can arise through contract, a voluntary undertaking, a blood relation, and occasionally through one’s official position. Duty also can arise from one’s own creation of a dangerous situation.(2)mens reaA second element of a crime is mens rea. Mens rea refers to an individual’s state of mind when a crime is committed. While actus reus is proven by physical or eyewitness evidence, mens rea is more difficult to ascertain. The jury must determine for itself whether the accused had the necessary intent to commit the act.A lower threshold of mens rea is satisfied when a defendant recognizes an act is dangerous but decides to commit it anyway. This is recklessness. For instance, if Cain tears a gas meter from a wall, and knows this will let flammable gas escape into a neighbor’s house, he could be liable for poisoning. Courts often consider whether the actor did recognise the danger, or alternatively ought to have recognized a danger (though he did not) is tantamount to erasing intent as a requirement. In this way, the importance of mens rea hasbeen reduced in some areas of the criminal law.Wrongfulness of intent also may vary the seriousness of an offense. A killing committed with specific intent to kill or with conscious recognition that death or serious bodily harm will result, would be murder, whereas a killing affected by reckless acts lacking such a consciousness could be manslaughter.(3)CausationThe next element is causation. Often the phrase “but for”is used to determine whether causation has occurred. For example, we might say “Cain caused Abel”, by which we really mean “Cain caused Abel’s death. ”In other words, ‘but for Cain’s act, Abel would still be alive.” Causation, then, means “but for” the actions of A, B would not have been harmed. In criminal law, causation is an element that must be proven beyond a reasonable doubt.(4) Proof beyond a Reasonable DoubtIn view of the fact that in criminal cases we are dealing with the life and liberty of the accused person, as well as the stigma accompanying conviction, the legal system places strong limits on the power of the state to convict a person of a crime. Criminal defendants are presumed innocent. The state must overcome this presumption of innocence by proving every element of the offense charged against the defendant beyond a reasonable doubt to thesatisfaction of all the jurors. This requirement is the primary way our system minimizes the risk of convicting an innocent person.The state must prove its case within a framework of procedural safeguards that are designed to protect the accused. The state’s failure to prove any material element of its case results in the accused being acquitted or found not guilty, even though he or she may actually have committed the crime charged.3. Strict LiabilityIn modern society, some crimes require no more mens rea, and they are known as strict liability offenses. For in stance, under the Road Traffic Act 1988 it is a strict liability offence to drive a vehicle with an alcohol concentration above the prescribed limit.Strict liability can be described as criminal or civil liability notwithstanding the lack mens rea or intent by the defendant. Not all crimes require specific intent, and the threshold of culpability required may be reduced. For example, it might be sufficient to show that a defendant acted negligently, rather than intentionally or recklessly.1. 概述刑法是规定什么试犯罪，有关犯罪嫌疑人之逮捕、起诉及审判，及对已决犯处以何种刑罚的部门法。

The Stereo Garage1.1 An overview of the stereo garageVehicles parked nowhere is the problem of the urban social, economic and transport development to a certain extent the result, Garage Equipment development in foreign countries, especially in Japan nearly 30-40 years. Whether technically or in terms of experience had been a success. China is also in the beginning of the 1990s developed mechanical parking equipment, which was 10 years in the past. Because a lot of new residents in the district with the ratio of 1:1. To address the size of parking spaces for tenants and business areas contradictions 3D mechanical parking equipment with an average size of a small motorcycle's unique characteristics, the majority of users have been accepted.Compared with the traditional natural underground garage, Machinery garage demonstrates its superiority in many respects. First, the mechanical garage has a prominent section of superiority. Past due to the underground garage must elapse enough lanes, the average car will occupy an area of 40 square meters, If the use of double-mechanical garage, which would enable ground to improve the utilization rate of around 80% to 90%, If using ground multi-storey (21 storey), three-dimensional garage, 50 square meters of land area will be placed on the 40 cars, which can greatly save the limited land resources, Civil and save development costs.To underground garage, Mechanical garage can be more effective to ensure personal and vehicle safety in the garage or car kept prospective location, the entire electronic control equipment would not operate. It should be said that the mechanical garage from the management can do a thorough separation of people and vehicles.In the underground garage using mechanical parking, it also can remove the heating ventilation; therefore, Operation of the power consumption than workers in the management of underground garage is much lower. Mechanical garage don't usually do complete system, but as a single machine containers. This will give full play to its small space, the advantages of decentralized, Each of the residential areas or groups downstairs to make a complete circuit can be set up random mechanicalparking building. This garage of the district can solve the shortage of parking difficulty in providing convenient conditions right now.Currently, three-dimensional garage mainly in the following forms: lifting and transferring,aisle stacking garage, vertical garage, vertical cycle, box-level cycle, the level of circulating round.1.1.1 Lifting and transferringLifting and transferring Garage modular design, each module can be designed into two, three, four levels, the five-story, semi-submerged in various forms, such as the number of parking spaces from a few to hundreds. Three-dimensional garage applies to the ground and underground car parks, configuration flexibility and cost is low.1. Product features:1) Save land, the configuration flexibility, and shorter construction period.2) Low prices, firefighting and exterior decoration, with a total investment on small foundations.3) Use automatic control, simple structure, safe and reliable.4) Access to a quick, short waiting time.5) Run a smooth, low noise.6) Applies to commercial, offices, and residential quarters supporting the use of car parks.2. Safety devices: anti-dropping device, a photoelectric sensor, spacing protectors, emergency stop switch.1.1.2 Aisle stacking garageAisle stacking garage used as a stacking machine tool access vehicles. All vehicles are stacking machine access, so the technical requirements for stacker higher, a single stacker cost is higher. So aisle stacking apply to the parking garage needs a few more customers.1.1.3 Vertical GarageVertical Garage Elevator similar to the principle that both sides of the hoist layout spaces. Generally need a ground vehicle rotary tables can be saved by the driver away. Vertical Garage generally higher high (tens of meters), safety equipment, Installation precision machining requirements are very high, high cost, but has the smallest area.1.1.4 Vertical cycleProduct features:1) covers an area of small; two berths area can stop 6-10 vehicles.2) The decoration can be added only roof, fire hydrants available.3) Low prices, foundation, external decoration, fire and other small investment, short construction periods.4) Use automatic control, safe and reliable operation.2.2.1 The stereo garage automatic control systemThe modern large-scale building mainstream is intelligent mansion and community. So, automated parking equipment or garage automatic control system will become intelligent mansion and an important part of community. Simple, fast, easy to use, safe, reliable, and less maintenance, to provide users with a safe, easy to use environment, This is auto-parking feature of the basic equipment. All parking equipment operating conditions, vehicles parked in time, vehicle storage Malaysia, garage storage capacity. Vehicles kept high and low peaks, and other information can be transmitted through the network of intelligent control center through intelligent control center operator, and the broadcasting system and the management office of the Division linked related to early release control, management information, thus achieving all the intelligent management. Building and the Community through the intelligent control of the center could also associate with social networking functions. Information released to the collection coming out or expands utilization of the garage social and economic benefits. This will be the automation of the development direction of the garage. Solid Garage automation control system include the following five major subsystems: automatic toll collection management system automatic access systems for remote diagnosis system, automatic Gate, control security system.Subsystems are more unified control of the central control room, for customers planning Garage form of management, Published garage inventory capacity, traffic control program.2.1.1 Automatic Toll Management SystemAutomatic charge adopts contactless IC card. IC card points long-term card and the stored-card. For fixed users, the issue of long-term cards, the cost of fixed users pays management fees paid together; on the temporary users, issue stored-value cards, namely: the user feespaid cards exist within each parking card reader automatically deducted from the cost.2.1.2 Automatic vehicle access systemAutomatic vehicle access system is generally controlled by small PLC. Including the identification card number and mobile disc contains two cars process. Users enter the garage at the entrance to Swiping cards, reader data automatically transmitted to the PLC control system, PLC system through the judgment card number and automatically set the corresponding site mobile trucks and vehicles to the handover location, the garage door opened, shorten the time access to cars. Truck drivers light signals in accordance with the guidelines created only when vehicles parked in a safe location, Parking will be normal light-Kai. Access car after the completion of the garage doors shut down automatically. Mobile site contains car, the system in strict accordance with the various signal detection mobile state, including long signal detection, Detection in place, the position detection limit, officers hit detection, emergency stop signal detection. If cars are running plate is not in place or vehicle length in excess of the permitted length of the garage, all vehicles disc will contain no action, If detected emergency stop signal to stop all action until the emergency stop signal disappeared. Above signals are hardware signals, in addition, the software can also be installed to control signal protection, such as the protection of the time, to ensure that the damage due to hardware failure to signal equipment and the main guarantee for the safety of vehicles.2.1.3 Remote diagnosis systemControllers can spot card, hubs and other network equipment and control center connected to the LAN, MODEN through remote management, monitoring the operation of the scene, when the scene failure, in the control center can be addressed to facilitate the management, e-office security personnel.2.1.4 Automatic GateIn the garage entrance of the no-contact reader, and the Gate of coil users in the garage entrances Swiping cards, the system automatically discriminates validity of the card, if valid, the Gateopen automatically, through induction coils, Automatic self-closing fence; If invalid, the Gate is not open, and sound and light alarm.2.1.5 Monitoring security systemMonitoring security system is in the central control room for monitoring and controlling the operation of the garage scene conditions. It has motion detection, license plate recognition, network connections, different types of alarm systems linkage, and other functions, can be achieved unguarded.System catalog:Video monitoring function : the garage entrances, and the duty, the main segments within the garage installation focusing cameras, On the larger spaces installation spherical platforms, in order to achieve all-round garage on real-time monitoring. If the garage light conditions of the poor would use black-and-white cameras.Motion Detection functions: setting up the night in the garage of motion detection region, detecting when there are a moving target, Motion Detection and Alarm function remind staffs.LPR functions: it can set up the garage light vehicle license plates, vehicle. When the light vehicles entering the garage regional surveillance, the system automatically cross-referenced with images of a very odd situation, issued a warning signal and automatic switching and record their images.Alarm linkage functions: all can move even the police mainframe, if activated Relay acousto-optic warning issued notice of security personnel to voluntarily disarm Gate interception of vehicular access.Digital video functions : it with a continuous record of what happened in the garage, can be synchronized intervals over images arbitrary choice of the overall image to enlarge and local amplification, recording, playback, backup can be conducted all kinds of information.Reportedly, has begun an increasing number of residential quarters began to use a mechanical garage. Taking into account the cost and maintenance, the majority of the district is a multi-storey lifting and transferring parking equipment, mass storage mechanical garage also rarely. Lifting and transferring Garage Equipment parking flow indicate the following:1、The sense of light yellow instructions garage operationRed lamp was ongoing operating instructions, please wait; Green light is currently no operating instructions, can operate; yellow light instructions were to fail, the garage can not work.2、The operationDrivers of vehicles enter from the garage entrance. At the entrance of non-contact sensors Reader former regional shaken following their IC cards, induction process completed, the fence automatically rises driver drove into the garage. The fence shut down automatically after vehicles entering. Card is the controller to read spaces, corresponding to the parking garage containing cars moved to the site automatically transfer vehicle location, Automatic garage door open units. Car drivers entering and parking in place, Latin hand brake, alighted out of the garage, using IC cards in the garage exit Huang about IC cards Garage door modules to shut down automatically. Completed deposit truck operators.3、Collect the car operationDrivers entering the garage at the entrance to the non-contact sensors Reader former regional shaken following their IC cards Controller automatically read spaces, corresponding to the parking garage containing cars moved to the site automatically transfer vehicle location, Automatic garage door open modules, drivers entering the garage and drive out, in the garage exit of the automatic reader before induction regional dazzle your own IC cards, sensors finished, the reader receive information, Host controller automatically recorded, prepaid, automatically raising the fence, the driver drove the playing field, appeared after fencing to shut down automatically. Meanwhile, Controller automatically read spaces, corresponding to the garage door unit shut down automatically. Vehicle operation finished.The garage has a complete self-protection device in the course of operation. A series of photoelectric switches, proximity switches, trip switches and other vehicles on site contains accurate operation in place to play a decisive role; falling unique defense installations, broken rope warning device, speeding vehicle protection device to protect the security role played. Detection of long vehicles, vehicle parking is not in place detection, and personnel into a detection signal of vehicles and the safety play a decisive role.翻译立体车库1.1 立体车库概述车辆无处停放的问题是城市的社会、经济、交通发展到一定程度产生的结果，立体停车设备的发展在国外，尤其在日本已有近3040年的历史，无论在技术上还是在经验上均已获得了成功。

20外⽂⽂献翻译原⽂及译⽂参考样式华北电⼒⼤学科技学院毕业设计（论⽂）附件外⽂⽂献翻译学号： 0819******** 姓名：宗鹏程所在系别：机械⼯程及⾃动化专业班级：机械08K1指导教师：张超原⽂标题：Development of a High-PerformanceMagnetic Gear年⽉⽇⾼性能磁齿轮的发展1摘要：本⽂提出了⼀个⾼性能永磁齿轮的计算和测量结果。

上述分析的永磁齿轮有5.5的传动⽐，并能够提供27 Nm的⼒矩。

分析表明，由于它的弹簧扭转常数很⼩，因此需要特别重视安装了这种⾼性能永磁齿轮的系统。

上述分析的齿轮也已经被应⽤在实际中，以验证、预测其效率。

经测量，由于较⼤端齿轮传动引起的磁⼒齿轮的扭矩只有16 Nm。

⼀项关于磁齿轮效率损失的系统研究也展⽰了为什么实际⼯作效率只有81％。

⼀⼤部分磁损耗起源于轴承，因为机械故障的存在，此轴承的备⽤轴承在此时是必要的。

如果没有源于轴的少量磁泄漏，我们估计能得到⾼达96％的效率。

与传统的机械齿轮的⽐较表明，磁性齿轮具有更好的效率和单位体积较⼤扭矩。

最后，可以得出结论，本⽂的研究结果可能有助于促进传统机械齿轮向磁性齿轮发展。

关键词：有限元分析（FEA）、变速箱，⾼转矩密度，磁性齿轮。

⼀、导⾔由于永久磁铁能产⽣磁通和磁⼒，虽然⼏个世纪过去了，许多⼈仍然着迷于永久磁铁。

，在过去20年的复兴阶段，正是这些优点已经使得永久磁铁在很多实际中⼴泛的应⽤，包括在起重机，扬声器，接头领域，尤其是在永久磁铁电机⽅⾯。

其中对永磁铁的复兴最常见于效率和转矩密度由于永磁铁的应⽤显著提⾼的⼩型机器的领域。

在永久磁铁没有获取⾼度重视的⼀个领域是传动装置的领域，也就是说，磁⼒联轴器不被⼴泛⽤于传动装置。

磁性联轴器基本上可以被视为以传动⽐为1：1磁⼒齿轮。

相⽐标准电⽓机器有约10kN m/m的扭矩，装有⾼能量永久磁铁的磁耦有⾮常⾼的单位体积密度的扭矩，变化范围⼤约300–400 kN 。