ACT-5260PC-133F17T中文资料

■ﾠ高技术应用的控制器■ﾠ基于工业以太网的运动控制系统■ﾠ集成多轴运动控制器■ﾠ智能伺服驱动器■ﾠ工业以太网多轴伺服驱动器■ﾠ通用伺服驱动器■ﾠ智能直流调速器■ﾠ通用直流调速器派克机电产品纵览运动控制驱动技术直流调速器■ﾠ智能交流变频器■ﾠ通用交流变频器交流变频器2■ﾠ滚珠丝杠驱动工作台■ﾠ直线电机驱动工作台■ﾠ高精度微型工作台■ﾠ经济型■ﾠ高精度高精度执行器与工作台行星齿轮减速机■ﾠ伺服电机■ﾠ防爆伺服电机■ﾠ高速大功率伺服电机■ﾠ高性能车载电机■ﾠ直线电机组件■ﾠ直驱电机■ﾠ高性能伺服电机■ﾠ电动缸■ﾠ线性执行器电机执行器3ACR 系列是派克主要的独立封装的运动控制器，能够实现多达八轴的运动控制。

简单易用的项目开发组件，使应用系统构建及维护快速，高效。

ACR74C/78C 是4轴/8轴运动控制器；ACR74T 是集成4轴步进电机驱动器的驱控一体机；ACR74V/78V 是集成4轴/8轴低压伺服驱动器的驱控一体机。

强大、集成化和为机械市场设计的派克自动化运动控制器(PAC)为OEM 提供了基于标准的自动化解决方案，能够满足严苛的应用要求。

PAC 将先进逻辑、多轴运动、信号处理和网络发布的可视化整合到一个以性能为导向的解决方案中，进而消除不必要的硬件和通信链接，并提高开发者的效率。

PAC网络架构派克自动化运动控制器 - PACACR 控制器系列•ﾠ K eywords: PAC CPU 运算能力更强•ﾠP AC: EtherCAT, 多轴插补•ﾠA CR:模拟量模式，简单易用ACR7C/7V ACR7000PAC3404智能伺服驱动器 - Compax3Compax3是派克汉尼汾不同国家和地区推出的伺服驱动器产品。

驱动器系列包括单轴，多轴驱动器，还有液压控制器。

这一系列驱动的功率从1到110kVA。

这一伺服驱动器的整个研发及制造过程全部在德国完成。

另外的生产基地也在美国建成。

作为一款销往不同国家和地区的伺服驱动控制器，Compax3在世界各地都有销售。

FANUC America Corporation3900 W. Hamlin RoadRochester Hills, MI 48309Tel: 888-FANUC-US (888-326-8287)FOR IMMEDIATE RELEASE FOR IMTS 2014FANUC INTRODUCES CNC INNOVATIONS THAT IMPROVEMACHINING PERFORMANCE, EASE OF USE AND MAINTENANCEAT IMTS 2014, BOOTH #S-8919ROCHESTER HILLS, MI – (June 25, 2014) FANUC America Corporation introducesCNC innovations that improve machining performance, ease of use and maintenance at IMTS 2014 Booth #S-8919. These include: introduction of the new Series 0i-F CNCwith new commonality of design and 15” display option, a new CNC platform with built in Bluetooth technology and digital servo adapter with new EtherCAT interface.FANUC’s new Series 0i -F CNC is the latest generation of the world’s most popular and best value Series 0i CNC that now has commonality of design to the versatile Series 30i CNC and a 15” display opt ion. The Series 0i-F boasts common operability,maintainability and networking options as the Series 30i CNC along with having a highly compatible PMC ladder. This translates to easier operation and maintenance across the plant floor. The seamless combination of using the same motors, amplifiers,peripheral devices (safety machine operator’s panel, I/O module/unit, iPendant,interface unit for handy machine operator’s panel) as the Series 30i further simplifies the ease of use and maintenance of the Series 0i-F. Seamless and common PMCfunctions among both the 0i-F and 30i-B CNCs include: multi-path PMC, ladder dividing management, function block, multi-language comment and I/O Link i. With anincreased axis number of 9 total controlled axes for a 1 path system for both 0i-MD (milling) and 0i-TD (turning) and a 2 path system now available on the 0i-MF with 11 total controlled axes, the Series 0i-F is more versatile to improve machiningperformance. Additional new features on the Series 0i-F include: 15” display, I/O Link i, FSSB high speed rigid tapping, function for loader control, tolerance control, axis name expansion, program folder management, quick program restart, flexible path axisassignment, multi-path PMC function, ladder dividing management, EtherNet/IP and PROFINET.FANUC’s new standard CNC platform allows for enhanced CNC functionality using PC technology. Built in Bluetooth on the CNC allows for the use of wireless technology that can operate a CNC by keyboard or mouse. So, via remote desktop it is possible totransfer data between a tablet and CNC. Advanced PC applications such as CAD/CAM or NCGuide are now available on the CNC remotely without leaving the machine. This improves functionality and use of the CNC. Other new feature s of FANUC’s newstandard CNC platform include: enhanced 3D graphics with MANUAL GUIDE i, new data server with larger storage and use of peripheral devices such as keyboard and mouse.FANUC’s Digital Servo Adapter with new EtherCAT interface adds more p ower to applications needing high-speed and high-accuracy. The Digital Servo Adapter allows for FANUC servo motors to be run from a separate controller over EtherCat. From 1 to 8 axes can be controlled, including a spindle interface and multiple large servo motors –up to 3 large servo motors at a time for industrial machines. The Digital Servo Adapter can replace hydraulic and other brand servo drives with high accuracy and high performance FANUC servo motors. The EtherCat interface is ideal for industrial machines such as: servo press machines, wire saw machines and electric injection molding machines.About FANUC CORPORATIONFANUC CORPORATION, headquartered at the foot of Mt. Fuji, Japan, is the most innovative manufacturer of Factory Automation, Robots and Robomachines in the world. Since its inception in 1956, FANUC has contributed to the automation of machine tools as a pioneer in the development of computer numerical control equipment. FANUC technology has contributed to a worldwide manufacturing revolution, which evolved from the automation of a single machine to the automation of entire production lines.About FANUC America CorporationFANUC America Corporation provides industry-leading robotics, CNC systems and factory automation solutions, and has annual sales in excess of $1B. FANUC’s innovative technologies and proven expertise help manufacturers in the Americas maximize efficiency, reliability and profitability.For more information about FANUC America Corporation, please call: 888-FANUC-US (888-326-8287) or visit our website: . Also, connect with us on YouTube, Twitter, Facebook, Google+ and LinkedIn. FANUC America is headquartered at 3900 W. Hamlin Road, Rochester Hills, MI 48309, and is a subsidiary of FANUC CORPORATION in Japan. FANUC America has facilities in: Atlanta; Boston; Charlotte; Chicago; Cincinnati; Cleveland; Dallas; Indianapolis; Los Angeles; Minneapolis; Montreal; Pine Brook, NJ; San Francisco; Toronto; Buenos Aires, Argentina; Sao Paulo, Brazil; and Aguascalientes, Mexico City and Monterrey, Mexico.FANUC America Corporation - CNC PR contact:Jill JozwikMarketing ManagerFANUC America CorporationT: 847-898-5673E: ****************************Caption:FANUC introduces CNC innovations that improve machining performance, ease of use and maintenance at IMTS 2014 Booth #S-8919.。

AIP -516/516P/519/526/526P 大尺寸触摸通用型温控器/调节器产品说明书AIP□-516/516P/519/526/526P系列一体屏目录1、产品概述 (1)2、主要技术指标 (2)2.2、显示功能 (2)2.3、存储功能 (2)2.4、仪表输入 (2)2.5、仪表输出 (3)2.6、通讯功能 (3)2.7、控制功能 (3)2.8、综合参数 (3)3、仪表型号定义及模块使用 (4)3.1、型号定义 (4)3.2、模块使用 (5)4、仪表安装 (7)4.1、尺寸图 (7)4.2、安装示意 (7)4.3、挂钩安装示意图 (7)5、仪表接线 (8)5.1、AIP5系列接口形式 (8)5.2、AIP7/AIP9系列接口形式 (8)5.3、AIP5系列接线 (9)5.4、AIP7/AIP9系列接线 (9)6、操作说明 (11)6.1、首次操作说明 (11)6.2、显示画面界面操作说明 (12)6.3、操作画面界面操作说明 (13)6.4、历史趋势界面操作说明 (16)6.5、数据报表界面操作说明 (17)6.6、报警信息界面操作说明 (18)6.7、系统设置界面操作说明 (19)7、扩展应用 (21)7.1、扩展说明 (21)8、附录 (22)8.1、系统参数说明 (22)8.2、特殊功能补充说明 (40)8.3、程序控制（仅适用AI-516P/526P系列） (40)8.4、自整定操作 (43)8.5、以太网访问（拥有以太网功能的屏具备此功能） (44)●在使用本产品前，请仔细阅读此说明书，正确使用，并妥善保管，以便随时参考。

●本使用说明书仅提供AIP□-516/516P/519/526/526P系列一体屏的规格、功能、安装、操作说明，界面组态等详细资料请登陆宇电官网下载。

●AIP□-516/516P/519/526/526P系列一体屏为开放式结构设计，在安装时需要注意防尘、防潮、避免冲击。

17 inch CRT MonitorCommercial Specifications Product HighlightsTrademarks owned by Royal Philips Electronics2004 © Royal Philips Electronics - All rights reserved As an Energy Star partner, Philips has determined that this product meets the Energy Star guidelines for energy efficiency.Microsoft and Windows are registered trademarks of Microsoft Corporation.All data subject to change without notice Release date: October 2004, Digital Deflection CPUAn exclusive Philips innovation -- the world's first one-chip CRTsolution -- combines the deflection and the Microcontroller in a single chip to process and control input sync digitally. This innovative technology prevents electronic noise that can harm display quality, reduces display jitter and improves geometry for better front of screen performance.High Bright Hot KeyA feature that delivers instant brightness adjustment to the ideal level for viewing text, Internet, game or multimedia applications,providing comfortable viewing and an enhanced experience for each type of application.XGA, 1024 x 768 resolutionFor graphics monitors, the screen resolution signifies the number of dots (pixels) on the entire screen. For example, a 1024-by-768pixel screen is capable of displaying 1024 distinct dots on each of 768 lines, or about 786 thousand pixels. XGA provides resolutions of 640 by 480 or 1024 by 768 pixels.High-bright, high-contrast tubeA CRT tube designed to increase display brightness and contrast by increasing the CRT ray gun's beam current.Real flat CRT displayPhilips advanced flat CRT technology that minimizes glare while reducing reflection and distortion, delivering natural viewing and display quality superior to that of conventional CRTs.sRGB readyCalibrated RGB that is optimized for the vast majority of computerperipherals, monitors, operating systems and browsers, allowing accurate color mapping with very little data overhead.Two platform compatibilityThe ability to work with a variety of platforms; Philips monitors are compatible to connect with PC by employing a VGA connection and connect with Macintosh.Lead freeLead-free display products are designed and produced in compliance with strict European Community Restriction of Hazardous Substances (RoHS) standards that restrict lead and other toxic substances that can harm health and the environment.Energy efficiencyReduction of the electrical power required to operate a device to achieve real savings.MPRII compliantThe world standard stringent levels setting of electromagnetic radiation emitted by monitors.Energy Star PartnerPower conservation requirements set forth by the Environmental Protection Agency of the U.S. government.Flame retardant caseA system of limiting accidental fires by engineering flame retardants into the monitor's case.Picture/Display• Display Screen Type Real Flat Picture Tube• Panel Size17"/ 41 cm • Phosphor P22• Recommended Display Area 306 x 230 mm (12.0" x 9.0")• Dot Pitch 0.25 mm• Horizontal Dot Pitch0.21 mm • White Chromaticity, 6500º K x = 0.313 / y = 0.329• White Chromaticity, 9300º K x = 0.283 / y = 0.297• Maximum Resolution 1280 x 1024 @ 60 Hz• Recommended Resolution1024 x 768 @ 85 Hz • Factory Preset Modes8 modes: 640 x 480 @ 60 Hz, 640 x 480 @ 85 Hz, 720 x 400 @ 70 Hz, 800 x 600 @ 75 Hz, 800 x 600 @ 85 Hz, 1024 x 768 @ 75 Hz 1024 x 768 @ 85 Hz, 1280 x 1024 @ 60 Hz • Factory Preload Modes 14 modes• Video Dot Rate120 MHz • Horizontal Scanning Frequency 30 - 71 KHz • Vertical Scanning Frequency 50 - 160 Hz • Recommended Refresh Rate 85 Hz• Screen EnhancementsAnti-glare Polarizer, Anti-reflection, Anti-static, High Brightness, High Contrast • Digital Deflection Yes • sRGB Yes • GTF YesConnectivity• Cables D-sub Video Cable, Power Cord • Sync Input Impedance (ohm) 4.7 k • Video Input Impedance (ohm) 75• Video Input Signal Levels 0.7 Vpp • Video Sync Input Signal Separate Sync • Video Sync Polarities Positive and Negative • Cable Connection AC Power inConvenience• Convenience Enhancements Menu Languages,On-screen Display• Monitor Controls Brightness Direct Access, Contrast Direct Access, High Bright Hotkey, Menu,Power On/Off• OSD Languages English, French, German, Italian, Spanish, Portuguese, Korean (Simplified Chinese, Russian, Turkish for someRegions)• Plug & Play Compatibility DDC 2BWindows 98/ME/2000/XP • Regulatory Approvals CE Mark, FCC-B, UL, CSA, MPR-II, Low Emission,NUTEK, Energy Star,SEMKO, TÜV/GS, TÜV Ergo, FDA, EZU, GOST, MEEI,PCBC, CCC, BSMI, E2000• Swivel +/- 90°• Tilt-5° to 13°Accessories• Included Accessories AC Power Cord• Optional Accessories Multimedia Base • User Manual YesDimensions• Depth (with base) 424 mm • Height (with base) 383 mm • Width (with base)397 mm • Temperature Range (Operation) 0°C to 40°C • Temperature Range (Storage) -25°C to 65°C • Weight15 kgPower• Complies With Energy Star, NUTEK, E2000• Consumption 68 W (Typical)• Off Mode1 W• Power LED Indicator Off, Flashing Green;Operation, Green • Power SupplyBuilt-in。

U L 489A N N E XU L 508U L 1077U L 1077E q u i p m e n t B r e a k e r sE a r t h L e a k a g e C i r c u i t B r e a k e r s• 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 • F 908.806.9490 • 10UL(AC),DL(DC) SeriesUL489 Miniature Molded Case Circuit BreakersCurrent/ Voltage RatingUL-Series DL-SeriesCalibration TemperatureAmbient Temperature Storage Temperature Terminal Size Acceptability Terminal Torque (min/max)Electrical Life Mechanical Life Vibration ResistanceResistance to mechanical shocks Degree of protection acc. IEC/EN 60529Mounting Orientation0.3 - 63A/ 240V AC, 0.3-32A/ 480Y/277V AC* (48V DC / pole pending)0.3 - 63A/ 125/ 250V DC 40ºC (104ºF)-25ºC to +55ºC (-13ºF to 131ºF )-40ºC to +70ºC (-40ºF to 158ºF )T op: 18-3 AWG; Bottom: 18-2 AWG 2 Nm (17.7 lb.in.) / 2.5Nm (22.2 lb.in)6,000 switching cycles ON/ OFF 10,000 switching cycles ON/ OFF> 15g according to DIN EN 60069-2-59 during a load with I 1= 1.05 x I N 25g @ 11ms IP20 In any planeIEC 60947-2Short Circuit Tested•Available in AC and DC models •DIN Rail Mounted •17.5mm width •Thermal Magnetic•Current Limiting (UL tested)•240V , 480Y/277V AC, 50/60Hz•125V DC (1 pole); 250V DC (2 pole)•10kA Short Circuit Interrupting Capacity •HACR T ype 40°C •Line/Load reversibleLISTED CUSE329510C.B.No.Poles Type 0.3-32A 40-63A 1AC 10kA @ 120, 240,10kA @ 120,277V 240V 2-3AC10kA @ 120, 240,10kA @ 120480Y/277V240VNo.Poles Type 0.3-3240-63A 1AC 15kA@240V 15kA@240V 2-3AC15kA@415V10kA@415VNo.Poles Type 0.3-32A 40-63A 1DC 10kA @ 125V 10kA @ 125V 2DC10kA @ 250V10kA @ 250V*One device, dual voltage ratings.Short Circuit Interrupting Capacity According to UL 489Short Circuit Interrupting CapacityAccording to IEC 60947-2, DIN EN 60947-2U L 489A N N E XU L 508U L 1077U L 1077E q u i p m e n t B r e a k e r sE a r t h L e a k a g e C i r c u i t B r e a k e r s • 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 •F 908.806.9490 • 11D-Characteristics AC1.05xRC1.35xRC10xRC16xRCD-Characteristics DC1.05xRC1.35xRC14xRC22.4xRC*The value of each characteristic is shown vertically beneath its corresponding heading.Characteristic Trip Boundaries Trip-Characteristics*ApplicationsC-Characteristics ACC-Characteristics DCThermal TripLighting Control CircuitsWiring Protection Business Equipment AppliancesTransformersPower Supplies HeatersMust not Trip>100ms Must Trip <1hr Must not Trip>100ms Must Trip at 100ms Magnetic TripLowInrush High InrushMotorsReactive LoadTelecommu-nications/Computer EquipmentPower Supplies1.05xRC1.35xRC5xRC10xRC1.05xRC1.35xRC7xRC14xRCWarning!This information should only be used as a selection guide. T he use of a Miniature Circuit Breaker in an application with a certain T rip-Characteristic always requires prototype testing! It is the responsibility of the circuit design engineer to select the appropriate Miniature Circuit Breaker for his specific application.1 Pole2 Pole3 Pole17.5 mm36.5 m m 36.8 m m35 mm52.5 mm68.4 mm 51.5 mm30.5 mm51.5 mm37.5 mm25.5 mm 14.5 mm45 m m105.3 m m52.5 m m34.5 m m 8467Dimensions in mmTrip CharacteristicVoltage Rating Rated Current No. of PolesApproval for heating,refrigerating and air conditioning devices.Approval Circuit Diagram Short Circuit RatingProduct SeriesIndividual Part Number is shown Marking DetailsU L 489A N N E XU L 508U L 1077U L 1077E q u i p m e n t B r e a k e r sE a r t h L e a k a g e C i r c u i t B r e a k e r s• 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 • F 908.806.9490 • 12C -TripCharacteristicLISTED C USE329510C.B.Application Examples:Low inrush motors, resistive loads, wiring protection, receptacles,lighting, and control circuit applications. Relatively short thermal trip delay and medium magnetic trip point.Standard Pack: 12Weight:0.3-32A:1.74kg (3.83lb.)40-63A:1.98kg (4.37lb.)Standard Pack: 6Weight:0.3-32A:1.74kg (3.83lb.)40-63A:1.98kg (4.37lb.)Standard Pack: 4Weight:0.3-32A:1.74kg (3.83lb.)40-63A:1.98kg (4.37lb.)Rated Type/ Rated Current Cat. No. Voltage 0.3A 1C03UL 277V AC 0.5A 1C05UL 277V AC 1.0A 1C1UL 277V AC 1.6A 1C1.6UL 277V AC 2.0A 1C2UL 277V AC 3.0A 1C3UL 277V AC 4.0A 1C4UL 277V AC 5.0A 1C5UL 277V AC 6.0A 1C6UL 277V AC 8.0A 1C8UL 277V AC 10A 1C10UL 277V AC 12A 1C12UL 277V AC 13A 1C13UL 277V AC 15A 1C15UL 277V AC 16A 1C16UL 277V AC 20A 1C20UL 277V AC 25A 1C25UL 277V AC 30A 1C30UL 277V AC 32A 1C32UL 277V AC 40A 1C40UL 240V AC 50A 1C50UL 240V AC 60A 1C60UL 240V AC 63A 1C63UL 240V ACOne PoleThree PoleTwo PoleAdd-on Neutral PoleRated Type/ Rated Current Cat. No. Voltage 0.3A 2C03UL 480Y/277V AC 0.5A 2C05UL 480Y/277V AC 1.0A 2C1UL 480Y/277V AC 1.6A 2C1.6UL 480Y/277V AC 2.0A 2C2UL 480Y/277V AC 3.0A 2C3UL 480Y/277V AC 4.0A 2C4UL 480Y/277V AC 5.0A 2C5UL 480Y/277V AC 6.0A 2C6UL 480Y/277V AC 8.0A 2C8UL 480Y/277V AC 10A 2C10UL 480Y/277V AC 12A 2C12UL 480Y/277V AC 13A 2C13UL 480Y/277V AC 15A 2C15UL 480Y/277V AC 16A 2C16UL 480Y/277V AC 20A 2C20UL 480Y/277V AC 25A 2C25UL 480Y/277V AC 30A 2C30UL 480Y/277V AC 32A 2C32UL 480Y/277V AC 40A 2C40UL 240V AC 50A 2C50UL 240V AC 60A 2C60UL 240V AC 63A 2C63UL 240V ACRated Type/ Rated Current Cat. No. Voltage 0.3A 3C03UL 480Y/277V AC 0.5A 3C05UL 480Y/277V AC 1.0A 3C1UL 480Y/277V AC 1.6A 3C1.6UL 480Y/277V AC 2.0A 3C2UL 480Y/277V AC 3.0A 3C3UL 480Y/277V AC 4.0A 3C4UL 480Y/277V AC 5.0A 3C5UL 480Y/277V AC 6.0A 3C6UL 480Y/277V AC 8.0A 3C8UL 480Y/277V AC 10A 3C10UL 480Y/277V AC 12A 3C12UL 480Y/277V AC 13A 3C13UL 480Y/277V AC 15A 3C15UL 480Y/277V AC 16A 3C16UL 480Y/277V AC 20A 3C20UL 480Y/277V AC 25A 3C25UL 480Y/277V AC 30A 3C30UL 480Y/277V AC 32A 3C32UL 480Y/277V AC 40A 3C40UL 240V AC 50A 3C50UL 240V AC 60A 3C60UL 240V AC 63A 3C63UL 240V ACRated Type/ Rated Current Cat. No. Voltage 0.3-32A N32UL 480/277V AC 40-63A N63UL 240V ACStandard Pack: 6Weight:0.99kg (2.18 lb.)Standard Dual Connection Terminal•Box clamp terminals Top: 18-3 AWG;Bottom: 18-2 AWG (Line/Load reversible)•Ring tongue terminalsRing tongueBox clamp*May differ by manufacturer. T op terminal ring tongue max. thickness 1.6mm.18.3 mm (0.72 in.)M5 screw11.3 mm (0.44 in.)m a x . 8-12 m m (0.31-0.47 i n .)5.3 m m (0.21 i n .)UL - SeriesU L 489A N N E XU L 508U L 1077U L 1077E q u i p m e n t B r e a k e r sE a r t h L e a k a g e C i r c u i t B r e a k e r s • 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 •F 908.806.9490 • 13Application Examples:High inrush motors, transformers, power supplies, heaters and reactive loads. Relatively long thermal trip delay and very high magnetic trip point.LISTED C USE329510C.B.Standard Pack: 12Weight:0.3-32A:1.74kg (3.83lb.)40-63A:1.98kg (4.37lb.)Standard Pack: 6Weight:0.3-32A:1.74kg (3.83lb.)40-63A:1.98kg (4.37lb.)Standard Pack: 4Weight:0.3-32A:1.74kg (3.83lb.)40-63A:1.98kg (4.37lb.)Rated Type/ Rated Current Cat. No. Voltage 0.3A 1D03UL 277V AC 0.5A 1D05UL 277V AC 1.0A 1D1UL 277V AC 1.6A 1D1.6UL 277V AC 2.0A 1D2UL 277V AC 3.0A 1D3UL 277V AC 4.0A 1D4UL 277V AC 5.0A 1D5UL 277V AC 6.0A 1D6UL 277V AC 8.0A 1D8UL 277V AC 10A 1D10UL 277V AC 12A 1D12UL 277V AC 13A 1D13UL 277V AC 15A 1D15UL 277V AC 16A 1D16UL 277V AC 20A 1D20UL 277V AC 25A 1D25UL 277V AC 30A 1D30UL 277V AC 32A 1D32UL 277V AC 40A 1D40UL 240V AC 50A 1D50UL 240V AC 60A 1D60UL 240V AC 63A 1D63UL 240V ACOne PoleThree PoleTwo PoleAdd-on Neutral PoleRated Type/ Rated Current Cat. No. Voltage 0.3A 2D 03UL 480Y/277V AC 0.5A 2D 05UL 480Y/277V AC 1.0A 2D 1UL 480Y/277V AC 1.6A 2D 1.6UL 480Y/277V AC 2.0A 2D 2UL 480Y/277V AC 3.0A 2D 3UL 480Y/277V AC 4.0A 2D 4UL 480Y/277V AC 5.0A 2D 5UL 480Y/277V AC 6.0A 2D 6UL 480Y/277V AC 8.0A 2D 8UL 480Y/277V AC 10A 2D 10UL 480Y/277V AC 12A 2D 12UL 480Y/277V AC 13A 2D 13UL 480Y/277V AC 15A 2D 15UL 480Y/277V AC 16A 2D 16UL 480Y/277V AC 20A 2D 20UL 480Y/277V AC 25A 2D 25UL 480Y/277V AC 30A 2D 30UL 480Y/277V AC 32A 2D 32UL 480Y/277V AC 40A 2D 40UL 240V AC 50A 2D 50UL 240V AC 60A 2D 60UL 240V AC 63A 2D 63UL 240V ACRated Type/ Rated Current Cat. No. Voltage 0.3A 3D 03UL 480Y/277V AC 0.5A 3D 05UL 480Y/277V AC 1.0A 3D 1UL 480Y/277V AC 1.6A 3D 1.6UL 480Y/277V AC 2.0A 3D 2UL 480Y/277V AC 3.0A 3D 3UL 480Y/277V AC 4.0A 3D 4UL 480Y/277V AC 5.0A 3D 5UL 480Y/277V AC 6.0A 3D 6UL 480Y/277V AC 8.0A 3D 8UL 480Y/277V AC 10A 3D 10UL 480Y/277V AC 12A 3D 12UL 480Y/277V AC 13A 3D 13UL 480Y/277V AC 15A 3D 15UL 480Y/277V AC 16A 3D 16UL 480Y/277V AC 20A 3D 20UL 480Y/277V AC 25A 3D 25UL 480Y/277V AC 30A 3D 30UL 480Y/277V AC 32A 3D 32UL 480Y/277V AC 40A 3D 40UL 240V AC 50A 3D 50UL 240V AC 60A 3D 60UL 240V AC 63A 3D 63UL 240V ACRated Type/ Rated Current Cat. No. Voltage 0.3-32A N32UL 480/277V AC 40-63A N63UL 240V ACStandard Pack: 6Weight:0.99kg (2.18 lb.)Standard Dual Connection Terminal•Box clamp terminals T op: 18-3 AWG;Bottom: 18-2 AWG (Line/Load reversible)•Ring tongue terminalsRing tongueBox clamp*May differ by manufacturer. T op terminal ring tongue max. thickness 1.6mm.18.3 mm (0.72 in.)M5 screw11.3 mm (0.44 in.)m a x . 8-12 m m (0.31-0.47 i n .)5.3 m m (0.21 i n .)D -TripCharacteristicUL - SeriesU L 489A N N E XU L 508U L 1077U L 1077E q u i p m e n t B r e a k e r sE a r t h L e a k a g e C i r c u i t B r e a k e r s• 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 • F 908.806.9490 • 14C -Trip (DC)CharacteristicApplication Examples:Telecommunication equipment,computer equipment, uninterruptable power supplies.Standard Pack: 12Weight:0.3-32A:1.86kg (4.1lb.)40-63A:2.10kg (4.6lb.)Standard Pack: 6Weight:0.3-32A:1.86kg (4.1lb.)40-63A:2.10kg (4.6lb.)Rated Type/ Rated Current Cat. No. Voltage 0.3A 1C03DL 125V DC 0.5A 1C05DL 125V DC 1.0A 1C1DL 125V DC 1.6A 1C1.6DL 125V DC 2.0A 1C2DL 125V DC 3.0A 1C3DL 125V DC 4.0A 1C4DL 125V DC 5.0A 1C5DL 125V DC 6.0A 1C6DL 125V DC 8.0A 1C8DL 125V DC 10A 1C10DL 125V DC 12A 1C12DL 125V DC 13A 1C13DL 125V DC 15A 1C15DL 125V DC 16A 1C16DL 125V DC 20A 1C20DL 125V DC 25A 1C25DL 125V DC 30A 1C30DL 125V DC 32A 1C32DL 125V DC 40A 1C40DL 125V DC 50A 1C50DL 125V DC 60A 1C60DL 125V DC 63A 1C63DL 125V DCOne PoleTwo PoleRated Type/ Rated Current Cat. No. Voltage 0.3A 2C03DL 250V DC 0.5A 2C05DL 250V DC 1.0A 2C1DL 250V DC 1.6A 2C1.6DL 250V DC 2.0A 2C2DL 250V DC 3.0A 2C3DL 250V DC 4.0A 2C4DL 250V DC 5.0A 2C5DL 250V DC 6.0A 2C6DL 250V DC 8.0A 2C8DL 250V DC 10A 2C10DL 250V DC 12A 2C12DL 250V DC 13A 2C13DL 250V DC 15A 2C15DL 250V DC 16A 2C16DL 250V DC 20A 2C20DL 250V DC 25A 2C25DL 250V DC 30A 2C30DL 250V DC 32A 2C32DL 250V DC 40A 2C40DL 250V DC 50A 2C50DL 250V DC 60A 2C60DL 250V DC 63A 2C63DL 250V DCStandard Dual Connection Terminal•Box clamp terminals Top: 18-3 AWG;Bottom: 18-2 AWG (Line/Load reversible)•Ring tongue terminalsRing tongueBox clamp*May differ by manufacturer. T op terminal ring tongue max. thickness 1.6mm.18.3 mm (0.72 in.)M5 screw11.3 mm (0.44 in.)m a x . 8-12 m m (0.31-0.47 i n .)5.3 m m (0.21 i n .)LISTED C USE329510C.B.UL - Series ++–––+Warning!Correct polarity must be observedwhen connecting the DC circuit breakers.U L 489A N N E XU L 508U L 1077U L 1077E q u i p m e n t B r e a k e r sE a r t h L e a k a g e C i r c u i t B r e a k e r s • 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 •F 908.806.9490 • 15D -Trip (DC)CharacteristicApplication Examples:Telecommunication equipment,computer equipment, uninterruptable power supplies.Standard Pack: 12Weight:0.3-32A:1.86kg (4.1lb.)40-63A:2.10kg (4.6lb.)Standard Pack: 6Weight:0.3-32A:1.86kg (4.1lb.)40-63A:2.10kg (4.6lb.)Rated Type/ Rated Current Cat. No. Voltage 0.3A 1D03DL 125V DC 0.5A 1D05DL 125V DC 1.0A 1D1DL 125V DC 1.6A 1D1.6DL 125V DC 2.0A 1D2DL 125V DC 3.0A 1D3DL 125V DC 4.0A 1D4DL 125V DC 5.0A 1D5DL 125V DC 6.0A 1D6DL 125V DC 8.0A 1D8DL 125V DC 10A 1D10DL 125V DC 12A 1D12DL 125V DC 13A 1D13DL 125V DC 15A 1D15DL 125V DC 16A 1D16DL 125V DC 20A 1D20DL 125V DC 25A 1D25DL 125V DC 30A 1D30DL 125V DC 32A 1D32DL 125V DC 40A 1D40DL 125V DC 50A 1D50DL 125V DC 60A 1D60DL 125V DC 63A 1D63DL 125V DCOne PoleTwo PoleRated Type/ Rated Current Cat. No. Voltage 0.3A 2D03DL 250V DC 0.5A 2D05DL 250V DC 1.0A 2D1DL 250V DC 1.6A 2D1.6DL 250V DC 2.0A 2D2DL 250V DC 3.0A 2D3DL 250V DC 4.0A 2D4DL 250V DC 5.0A 2D5DL 250V DC 6.0A 2D6DL 250V DC 8.0A 2D8DL 250V DC 10A 2D10DL 250V DC 12A 2D12DL 250V DC 13A 2D13DL 250V DC 15A 2D15DL 250V DC 16A 2D16DL 250V DC 20A 2D20DL 250V DC 25A 2D25DL 250V DC 30A 2D30DL 250V DC 32A 2D32DL 250V DC 40A 2D40DL 250V DC 50A 2D50DL 250V DC 60A 2D60DL 250V DC 63A 2D63DL 250V DCLISTED C USE329510C.B.UL - Series Standard Dual Connection Terminal•Box clamp terminals Top: 18-3 AWG;Bottom: 18-2 AWG (Line/Load reversible)•Ring tongue terminalsRing tongueBox clamp*May differ by manufacturer. T op terminal ring tongue max. thickness 1.6mm.18.3 mm (0.72 in.)M5 screw11.3 mm (0.44 in.)m a x . 8-12 m m (0.31-0.47 i n .)5.3 m m (0.21 i n .)++–––+Warning!Correct polarity must be observedwhen connecting the DC circuit breakers.U L 489A N N E XU L 508U L 1077U L 1077E q u i p m e n t B r e a k e r sE a r t h L e a k a g e C i r c u i t B r e a k e r s• 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 • F 908.806.9490 • 16Type/ Cat No.Description Contacts Type Std Pk H10UL 1 Auxiliary Contact 1NO 6H11UL 2 Auxiliary Contacts 1NO + 1NC 6H12UL 3 Auxiliary Contacts 1NO + 2NC 6H21UL 3 Auxiliary Contacts 2NO + 1NC 6HLS11L*1 Auxiliary/1 Signal Contact 1CO + 1CO (Signal)6Max. Operating Type/ Cat No.Rated Voltage U N Current @ U N Std Pk FA12UL 12V AC/DC 1.3A 5FA24UL 24V AC/DC 0.6A 5FA48UL 48 - 72V AC/DC 0.2A50.25A @ 110V FA110UL0.5A @ 240V 50.58A @ 277V110 - 240V AC/DC,277V ACRated Operating 10A@240V AC Currents3A@110V DC 1A@220V DC Minimum Contact Load 1mA @ 24V DC Torquemax. 0.8Nm (7 lb.in)Wire Range :Single Wire 1.0mm² - 2.5mm² (18-14 AWG)Stranded Wire 1.0mm² - 1.5mm² (18-16 AWG)Stranded Wire 1.0mm² - 1.5mm² (18-16 AWG)with FerruleType/ Cat No.Rated Current I NRated Voltage U N Std Pk N32UL 0.3 - 32A 480Y/277V AC 6N63UL40 - 63A240V AC6UL/DL Series AccessoriesAuxiliary Contact, Alarm SwitchShunt TripNeutral Pole8.8 mm63.8 mm6 mm45 m m87 m m 52.7 m m17.7 m m51.5mm 37.5mm 25.5mm52.5m m45m m34.5m m36.5m m36.8m m105.3m m6mm7mm8mm 14.5mm17.5mm30.5mm 51.5mm 68.4mm4mm89.5 m m45 m mc a . 180-20045 m m17.5 mm21.8 mmAWG 236 mm68.4 mm43.6 mm45 m m88 m m9 mm68.4 mm43.8 mm63.8 mm6 mm12.4 mmLISTED C.B. ACC.3NY7CUSE335632For mounting instructions please refer to page 43.Dimensions HxxUL.Dimensions HLS11L.Dimensions NxxUL, FAxxULDimensions UA120ULType/ Cat No.Line Voltage V E Std Pk UA120UL120V AC, 60Hz5Reset-Hold Voltage = 0.85 x V EDrop-Out Voltage = 0.35 ~ 0.7 x V EV E = Rated Voltage* UL not approved.Undervoltage Trip*Type/ Cat No.Std Pk E98341910Mounting Screw 34mmto connect the auxiliary contact and shunt trip or neutral Pole to the circuit breaker.Type/ Cat No.Std Pk EASS10Type/ Cat No.Std Pk 15.9601Lock-out Adapter**Type/ Cat No.Std Pk BS.UL100Touch Protection Capsto cover the terminal screw holes on the switching devices, neutral Poles and shunt trips for increased touch protection.Cooling Spacer**UL and DL series can also be locked in the on and off position by simply using a common lead or meter seal, which gets fed through the hole in the handle and a corresponding hole in the housing.1/4”U L 489A N N E XU L 508U L 1077U L 1077E q u i p m e n t B r e a k e r sE a r t h L e a k a g e C i r c u i t B r e a k e r s• 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 • F 908.806.9490 • 17“C” Magnetic Trip Parameters Rated current 0.3A to 63A.1. Hold for a minimum of 100ms at surge of 5 times rated current.2. Trip in under 100ms at 10 times rated current.“D” Magnetic Trip Parameters Rated current 0.3A to 63A.1. Hold for a minimum of 100ms at surge of 10 times rated current.2. T rip in under 100ms at 16 times rated current.10-34x10-310-24x10-210-10.41410141040601234568102040100Multiple of Rated CurrentS e c o n d sM i n u t e sT r i p p i n g t i m e tThermal Overload“Must T rip” < 1 hr = 135% RC “Must Not Trip” > 1 hr = 105% RC1.05-1.35xI N 0.3A Through 10A Rated Current 10-34x10-310-24x10-210-10.41410141040601234568102040100Multiple of Rated CurrentS e c o n d sM i n u t e sT r i p p i n g t i m e tThermal Overload“Must T rip” < 1 hr = 135% RC “Must Not Trip” > 1 hr = 105% RC1.05-1.35xI N 12A Through 63A Rated Current1.05-1.35xI N1234568102040100Multiple of Rated Current10-34x10-310-24x10-210-10.4141014104060S e c o n d sM i n u t e sT r i p p i n g t i m e t16Thermal Overload“Must T rip” < 1 hr = 135% RC “Must Not T rip” > 1 hr = 105% RC0.3A Through 10A Rated Current10-34x10-310-24x10-210-10.4141014104060123451668102040100Multiple of Rated CurrentS e c o n d sM i n u t e sT r i p p i n g t i m e tThermal Overload“Must T rip” < 1 hr = 135% RC “Must Not T rip” > 1 hr = 105% RC1.05-1.35xI N 12A Through 63A Rated CurrentUL Series (AC) Trip CurvesC (AC) Trip CurveD (AC) Trip CurveU L 489A N N E XU L 508U L 1077U L 1077E q u i p m e n t B r e a k e r sE a r t h L e a k a g e C i r c u i t B r e a k e r s• 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 • F 908.806.9490 • 1810-34x10-310-24x10-210-10.41410141040601234567810142040100Multiple of Rated CurrentS e c o n d sM i n u t e sT r i p p i n g t i m e tThermal Overload“Must Trip” < 1 hr = 135% RC “Must Not T rip” > 1 hr = 105% RC1.05-1.35xI N 0.3A Through 10A Rated Current 1.05-1.35xI N1234578102040100Multiple of Rated Current 10-34x10-310-24x10-210-10.4141014104060S e c o n d sM i n u t e sT r i p p i n g t i m e t14Thermal Overload“Must Trip” < 1 hr = 135% RC “Must Not T rip” > 1 hr = 105% RC12A Through 63A Rated Current 10-34x10-310-24x10-210-10.41410141040601234568101422.440100Multiple of Rated CurrentS e c o n d sM i n u t e sT r i p p i n g t i m e tThermal Overload“Must T rip” < 1 hr = 135% RC “Must Not Trip” > 1 hr = 105% RC1.05-1.35xI N 0.3A Through 10A Rated Current10-34x10-310-24x10-210-10.41410141040601234514681022.440100Multiple of Rated CurrentS e c o n d sM i n u t e sT r i p p i n g t i m e tThermal Overload“Must T rip” < 1 hr = 135% RC “Must Not T rip” > 1 hr = 105% RC1.05-1.35xI N 12A Through 63A Rated CurrentUL Series (DC) Trip CurvesC (DC) Trip CurveD (DC) Trip Curve“C” Magnetic Trip Parameters Rated current 0.3A to 63A.1. Hold for a minimum of 100ms at surge of 7 times rated current.2. Trip in under 100ms at 14 times rated current.“D” Magnetic Trip Parameters Rated current 0.3A to 63A.1. Hold for a minimum of 100ms at surge of 14 times rated current.2. Trip in under 100ms at 22.4 times rated current.U L 489A N N E XU L 508U L 1077U L 1077E q u i p m e n t B r e a k e r sE a r t h L e a k a g e C i r c u i t B r e a k e r s • 35 Royal Road • Flemington, NJ 08822-6000 • P 908.806-9400 •F 908.806.9490 • 19Short Circuit Current I [kA]Time Basis:t=8.3msUL/ DL Series Internal ResistanceUL Series Let-through Energy I 2t Diagram, D Trip 1 poleRated CurrentTrip Characteristic (A)C D (Ohm)(Ohm)0.316.862016.86200.5 6.8540 6.00091.0 1.7000 1.75601.60.58700.58702.00.41900.41903.00.20200.20204.00.10900.10905.00.06540.06546.00.05280.04918.00.02780.0240100.02160.0187120.00840.0085130.00840.008515/ 160.00850.0076200.00670.0064250.00500.004130/ 320.00320.0027400.00250.0022500.00190.001860/ 630.00180.0017For other Trip/Pole configurations use the following correction factors:C T rip 1 pole + 0.84 x curve value C T rip 2 pole + 0.71 x curve value C T rip 3 pole + 0.92 x curve valueD T rip 1 pole + 1.00 x curve value D T rip 2 pole + 0.87 x curve value D T rip 3 pole + 1.08 x curve value。

SOU-2cos φ ≥ 0.95M M HAL.230VKM MAC12250V / 1ADC14x AC1250V / 8AAC13xAC2250V / 5AAC14250V / 4AAC3250V / 4AAC15250V / 3AAC5b250WDC530V / 2AAC6a250V /4ADC1230V / 8AAC7b250V / 1ADC1330V / 2A02-28/2017 Rev.: 1xDC330V / 3AxDC130V / 8A15 16 18A1 A2 T1 T1 G GUnT1GT1GA1A21516189101112131415161718192015234678Made in Czech RepublicELKO EP, s.r.o.Palackého 493769 01 Holešov, VšetulyCzech RepublicTel.: +420 573 514 211Twilight digital switch with integrated time switch CharacteristicsDescriptionSymbol ConnectionType of loadMat. contacts AgSnO2,contact 8 AType of loadMat. contacts AgSnO2,contact 8 AAC5auncompensatedAC5acompensatedEN• It is used to control lighting based on the level of ambient light intensity and realtime (a combination of twilight switch / light switch and switching clock in oneproduct).• With the possibility to block the function of the twilight switch at a time when thelighting is undesirable or uneconomical.• External light sensor with IP65 protection, adapted for wall mounting (sensor hold-er included) or panel.• Backlit LCD display.• Backup of the set time using the battery.• Easily replace the backup battery without disassembling the device.• Switching mode AUTO:PROGRAM > according to the set program or RANDOM >switches randomly - simulation of the presence of people.• PROGRAM:LIGHT > switches according to the set level of illumination or TIME PRO-GRAM > switches according to the set time program.• Switching mode HOLIDAYS > blocking of the set program.• Switching mode MANUAL > permanently on or off.• Programming can also be done in backup mode (battery power).• In backup mode, relay output contacts do not work.• Automatic transition winter/daylight saving time (by region).• Display languages - CZ / SK / EN / ES / PL / HU / RU.SensorCONTROL OF A DISPLAY WITH BACKLIGHTPower on: Display is illuminated with a backlight for 10 seconds from the last button press.The display continuously shows the settings – date, time, day of the week, contact stateand programme. Permanent on / off is activated by simultaneous presses of the MAN,ESC, OK buttons.After activating the permanent on/off, the display will fl ash briefl y.Backup mode: After 2 minutes, the display switches to the sleep mode, i.e. shows no infor-mation. The display can be activated by pressing any button.1. Supply voltage terminals2. Display with back-light3. Place for seal4. Backup battery plug-in5. Output contact (15-16-18)6. Terminals - sensor (T1)7. Shield connection terminals(if shielded cable is used)8. Control buttons9. Indicates the day in the week10. Status indication11. Display of data / settings menu / light intensity12. ime display13. Control button PRG / +14. Reset15. Control button MAN / -16. Operating modes indication17. 12/24 hours format18. Indication of the switch program19. Control button ESC20. Control button OK. Switches display date / lightintensitySOU-2OK+_OK+_ESCOKoptionslanguageESPAnOLLIGHTTechnical parameters * ERROR - sensor short circuitLight sensorPhotosensor SKS-200 is external and is connected to terminals T1. Sensor is installable to panel (by screw-able transparent cover) to opening with diameter 20 mm. A part of the sensor is a plas-tic holder for placing into the wall or to another place. Length of a line connector to the sensor cannot be more than 50 m. Doublecure cable can be used as wire diameter min. 0.2 - 0.75 mm 2 / with sleeve: 0.25 - 0.34 mm 2 . Protection degree is IP65.To keep this protection:- photosensor SKS-200 cover must be sealed by a rubber circle (part of the sensor)- cable must be of round cross-selection- the opening must be tight to the used cableMode precendencemode precedencedisplay output mode⑥⑥⑥ON / OFF manual control⑥⑥ON / OFF holiday mode ⑥ON / OFF time program lightlightmode with the highest priorityLanguage settingsLight and Time Program can work at the same time on a single channel.Language selectionlanguageoptionsControl descriptionentrance into programming menu+_browsing in menu setting of values+_quick shifting during setting of valuesOK entrance into required menu confi rmationswitch. between display ESCone level upa step backESCback to the starting menuDevice diff ers short and long button press. In the manual marked as:- short button press (<1s) - long button press (>1s)After 30s of inactivity (from the last press of any button) will device automatically returns into starting menu.In the start screen, press OK to toggle between displaying the date or light intensity.The measured value after exceeding 999 is measured in the hundreds of thousands by display-ing the letter …k“ at the end. A comma separates the thousands line.Supply terminals:Supply voltage tolerance:Consumption:Supply voltage tolerance:Backup battery type:OutputNumber of contacts:Rated current:Switched capacity:Switched voltage:Dissipated power (max.):Mechanical life:Electrical life (AC1):Time circuitAccuracy:Minimum interval:Program data stored for:Program circuitIllumination range:Sensor failure indication:Number of program places:Program:Other dataOperating temperature Storage temperature:Dielectrical strength:Operating position:Mounting:Protection degree:Overvoltage cathegory:Pollution degree:Max. cable size (mm 2):Dimensions:Weight:Dimension of sensor:Weight sensor:Standards:A1 - A2AC 230V (50-60 Hz)4 VA / 1.7 W -15 %; +10 %CR 2032 (3V)1x changeover (AgSnO 2)8 A/AC12000 VA/AC1, 240 W/DC250V AC/30V DC0.6 W 30.000.000 ops. 100.000 ops.max. ±1s/ day at 23 °C1 min min. 10 years 10-50000 lx displayed on LCD *100daily, weakly, yearly-10 °C to +55 °C (-4 °F to 131 °F)-30 °C to +70 °C (-22 °F to 158 °F)4 kV (supply - output)3.5 kV (supply - sensor)any DIN rail EN 60715IP40 from front panel/IP20 terminalsIII.2max. 1x 2.5, max. 2x 1.5/with sleeve max. 1x 1.5 90 x 35 x 64 mm (3.5‘‘x 1.4‘‘x 2.5‘‘)142 g (5 oz.)58 x Ø 24 mm (2.3‘‘x Ø 0.9‘‘)16 g (0.5 oz.)EN 61812-1, EN 60669-1, EN 60669-2-115-1815-18Menu overviewLight functions setting.t1- delay time when switching ont2 - delay time when switching offThe value may be entered in a range of 10 to 50,000 lux.After exceeding a value of 9,800 lux, a period separates thethousands line.If the function light is active, then symbol …Auto“ is displayed on the screen.If the entered switching delay is shown on the display …Auto + t“.Ambient light courseSet levelDate and time settingrst day of the week.. Set the number from the set to the current date.rst day of the week.OKOKOKOKOKOKOKOKOKOKOKOKOKOKOKOKOKOKOK*Time programsetting of minutesminutesactivity on a week daymonthminuteshours setting of hoursactivity on a week daylevel or constant ON/OFFlevel or constant ON/OFFor constant ON/OFFprogram *yearly programsetting of the year setting of the month setting of the daysetting of minutessetting of hourslevel or constant ON/OFFCHANGE / DELETE . If you do not want to proceed, press ESC to go to the main settings without any change.If the program memory is full, you will see full on the display.If the programs memory is empty and you want to change or erase a program, the display will read empty.Setting the switching modesWhat you see on the display:- when a random mode is activated - Random - the symbol is lit .- vacation mode HOLIDAY:- the illuminated symbol indicates the vacation mode.- the fl ashing symbol indicates the vacation mode.- the symbol is not illuminated if the vacation mode is not set or has.- when the manual mode is activated, the symbol is lit and the manually controlled channel is fl ashing.Settings optionsTime correction:The shift unit is 0.1s per day.The numeric value refers to seconds per 10 days.Time correction is factory-set and individual for each product so that the real-time clock would run with minimum deviation. The time correction value can be arbitrarily adjusted, but after product RESET, the value returns to factory settings.onon+_on+_OK+ESCOKOKOKOK OK OKOK OK OK ESCOK+_+_OK OKOK+_+_+_+_+_OKOKOKOK+_OK+_PRG OK+_OK OKOKOKOKOKOKOKOKon+_OKOKOKOKOKOK OK OKCR2032+Performed by shortly pressing the hidden RESET button with a blunt-pointed object (e.g. a pencilor screw-driver with a diameter of at most 2 mm).The type of device and software version will be displayed for 1 second, then the device will enterdefault mode. This means that the language is set to EN, all data is zeroed (light function, time/date, user programs, device options function).Resetpress button OK to completethe deleting of all set programsin starting menu (time is shownon display) - press simultaneouslybutton and and displayannounces a notice allDeleting of all programsall16--sep-- 10Battery replacementYou can replace the battery without disassembling the device.- Eject the plug-in module with battery- Remove the original battery- Insert the new battery so that the top edge of the battery (+) is aligned with the Plug-in module- insert the plug-in module into the device - beware of polarity (+ up)16--sep-- 1016--sep-- 10WarningAn example of SOU-2 programmingSettings for switching upon exceeding the range of 1,500 lux. Settings of hysteresis at 10% and off delay at 10 min. Upon a change of the lux switching range each Friday at 12:00 p.m. to 2,000 and each Wednesday at 11:00 a.m. to 1,000 lux.lightlight time prog add addaddprog progday progday proghourhourminuteminuteintensity intensityset (lux)set (lux)set (lux)hysteresis set (%)hysteresis delay delayDevice is constructed for connection in 1-phase main alternating current voltage 230 V andmust be installed according to norms valid in the state of application. Connection according tothe details in this direction. Installation, connection, setting and servicing should be installedby qualifi ed electrician staff only, who has learnt these instruction and functions of the device.This device contains protection against overvoltage peaks and disturbancies in supply. F orcorrect function of the protection of this device there must be suitable protections of higherdegree (A, B, C) installed in front of them. According to standards elimination of disturbanciesmust be ensured. Before installation the main switch must be in position “OFF” and the deviceshould be de-energized. Don´t install the device to sources of excessive electro-magnetic in-terference. By correct installation ensure ideal air circulation so in case of permanent opera-tion and higher ambient temperature the maximal operating temperature of the device is notexceeded. For installation and setting use screw-driver cca 2 mm. The device is fully-electronic- installation should be carried out according to this fact. Non-problematic function dependsalso on the way of transportation, storing and handling. In case of any signs of destruction,deformation, non-function or missing part, don´t install and claim at your seller it is possible todismount the device after its lifetime, recycle, or store in protective dump.。

产品一览 466HMI适用于HTML5应用程序的HMI 468 适用于WebVisit软件的HMI 470 适用于Visu+的HMI 471工业PC机嵌入式PC机 474 机架式PC机 477 面板式PC机 481 触摸显示器 485用于移动应用的工业PC机平板式PC机 486 移动面板 487适于恶劣环境的HMI和工业PC机 488用于易爆区域的工业PC机 491用于海事应用的HMI 494HMI和工业PC机是系统和设备的关键所在。

可以通过整机IP65面板式PC机直接在现场操作，也可以采用强大的HMI 设备，高效设计出人机用户界面。

HMIHMI为人机界面的缩写，通过高效输入和监控，实现高性价比的自动化。

用户可根据自己的需求，选择适用于WebVisit、Visu+软件或HTML5应用的设备。

工业PC机工业PC机，简称IPC，同时具备现代化处理器的计算能力以及工业元件的坚固性与可靠性。

IPC配合相应的软件使用，是进行系统和机械控制、操作及监视的多功能高效解决方案。

用于移动场合的工业PC机面板式PC机是用于直观操作的先进的解决方案。

适于恶劣环境的HMI和工业PC机户外HMI 和工业PC 机适合暴露在外、受天气影响的环境。

这些设备采用IP67防护等级前面板、在阳光直射下可读的显示器和宽温设计，可用于充电站、废水处理厂等户外应用场合。

用于危险区域的工业PC机菲尼克斯电气提供通过IECEx和ATEX Zone 2/22认证的易爆区专用工业PC机。

用于海事应用的HMI针对严苛的船舶应用条件，菲尼克斯电气提供坚固耐用的操作和显示面板。

HMI和工业PC机适用于HTML5应用程序的HMI适用于WebVisit软件的HMI支持Visu+的HMI嵌入式PC机机架式PC机远距离连接方案软PLC面板式PC机触摸显示器用于移动场合的工业PC机适于恶劣环境的HMI和工业PC机用于危险区域的工业PC机海事HMI软件适于基础型HTML5应用适于严苛的HTML5应用电阻式触摸屏基本应用触摸屏电阻式触摸屏多点触控触摸屏可配置嵌入式PC机可配置嵌入式PC机可配置嵌入式PC机2U机架式PC机4U机架式PC机软件PLC软件PLC可配置面板PC机，采用Intel® Atom E3845技术可组态面板式PC可配置面板式PC可组态面板式PC可配置面板式PC触摸显示器，带投射电容式多点触控屏可配置平板PC机用于移动应用的工业PC机加固型Web面板加固型触摸屏可配置操作界面可配置嵌入式PC机可配置面板PC机，采用Intel® Atom E3845技术可配置面板式PC适于海事应用的可配置触摸屏。

The Importance of Condensate ManagementCondensate drains are one of the most ignored components in a compressed air system, however, these components are one ofthe most important parts to an effective treatment system.Contaminants enter a system at the compressor intake or can be introduced into the airstream during operation. Oil, water oil/water, lubricants , rust and pipe scale are all separated and filtered out by use of the filtration components installed in the system,but if the drains are not installed or do not operate properly the filters and separators are not successful.Drain TechnologiesIn a typical manufacturing facility many different types of drains can be utilized to prevent contaminants from entering thecompressed air system.. Of these there are two main technologies that Hankison offers,: Pneumatic and Timed ElectricCondensate Drains.Pneumatic Condensate DrainsPneumatic drains are an economical option for light to medium service duty. This type of drain offers versatile installation due tothe fact there is no need for electrical safety concerns during installation. Pneumatic drains are powered by air, not electricity, sothey are ideally suited for remote or portable applications. They are also safe to operate in any hazardous area. Drains offered byHankison are also zero-loss, meaning no compressed air is lost during the drain process. This results in energy savings.Timed Electric Condensate DrainsTimed Electric drains operate by utilizing two timed settings that a user can program according to their application and drainage requirements. The drains have one timer that is set for the interval between each time the drain opens. The second timer is set forthe amount of time that the drain is open. During the draining process there will be a minimal amount of air loss.Energy EfficiencyHow do your drains improve system efficiency? Besides the obvious savings of compressed air with a no-waste drain choice, thereare other less obvious ways drains can save energy or cost you energy if not properly maintained. They are key components in thequest for system efficiency and reliability.Installing automatic condensate drains has several benefits for every compressed air system• Saves Man Hours»Eliminate time draining air lines and equipment»Eliminate purging air lines before work begins• Prevents the receiver tank from filling up with condensate and causing the compressor to short cycle• Zero loss drains save on wasted compressed air created when valves are cracked open to purge the air lines of condensate• Ensures timely and effective condensate removal during working hours to protect end products and processes from contamination3Pneumatic DrainsHankison’s level actuated, pneumatically operated condensate drains automatically discharge water, oil, and oil/water emulsions from separators, receiver tanks, dryers, filters, after-coolers and drip legs. Each drain is engineered to reduce system downtime by eliminating the need to manually drain compressed air lines and equipment.Unlike simple float operated drains, these drains feature an air powered piston for positive opening and closing of the discharge port. This operation prevents clogging of the compressed air system while the baffle protects the operating mechanism fromCapacity1Materials ofConstruction7530 Series Product Specifications532 SeriesFeatures• Resistant to large particles 1/2” maximum diameter • Internal pilot operated diaphragm solenoid valve• H igh pressure model available: maximum working pressure 1500 psig (105 barg)• C omplete with strainer (not available on the high pressure drain)Model 532-03 and 532-04• Maximum working pressure:»300 psig, (21 barg)• Discharge port size:»3/8” in ( 9.5 mm) for 03 model »1/2” in (12.7 mm) for 04 model• Includes combination isolation valve and inlet strainerElectric Timed DrainsModel 531FrontSide HFront Side Model 532Global locationsBased in Charlotte, North Carolina, SPX Corporation (NYSE: SPW) is a global Fortune 500 multi-industry manufacturing leader. For more information, please visit SPX reserves the right to incorporate our latest design and material changes without notice or obligation. Design features, materials of construction and dimensional data, as described in this bulletin, are provided for your information only and should not be relied upon unless confirmed in writing. Please contact your local sales representative for product availability in your region. For more information visit . The green “>” is a trademark of SPX Corporation, Inc.ISSUED 09/2015 CDSCOPYRIGHT © 2015 SPX CorporationS PX FLOW TE CH N OLOGY4647 SW 40th AvenueOcala, Florida 34474-5788 U.S.A. P: (724) 745-1555F: (724) 745-6040E:**********************S PX U SAHankison Headquarters4647 SW 40th AvenueOcala, Florida 34474-5788 U.S.A. P: (724) 745-1555F: (724) 745-6040E:**********************Hankison Rental Northeast100 Commerce Drive, Suite 40Washington, PA 15301P: (724) 225-1470F: (724) 222-1317Hankison Rental Southwest1486 Champion Drive T errell, TX 75160 U.S.A.P: (800) 379-3711F: (972) 563-9991S PX CanadaHankison Canada1415 California AvenueBrockville, ON, Canada k6v 7h7P: (800) 267-3884F: (800) 318-0952S PX MexicoHankison MexicoAvenida Constitución #2165 -B Colonia JuliÁn Carrillo San Luis Potosí, S.L.P.C.P. 78250 MéxicoP: +52 (444) 815-7074F: +52 (444) 815-8295S PX South America Hankison BrazilRua Joao Daprat, 231 b09600-010-SÃ0 Bernardo Do Campo, SP BrazilP: +55 (11) 2166-4050 F: +55 (11) 2166-4070S PX EuropeHankison IrelandKillarney, Co Kerry IrelandP: (+353) 6466-33322 F: (+353) 6466-33371Hankison NetherlandsMunnikenheiweg 41Postbus 5704870 NE Etten-Leur Netherlands P: (+31) 76-5085800 F: (+31) 76-5085800Hankison GermanyKonrad-Zuse-Str. 25D-47445 Moers Germany P: (+49) 2841-8190 F: (+49) 2841-87112S PX IndiaSPX India PVT, L TD Manufacturing G-72/73Riico Industrial AreaMansarovar, RAJASTHAN Jaipur 302 020 IndiaP: (+91) 141-2396759 F:(+91) 141-2395048S PX Asia Pacific S PX China5th Floor, Park Center,No.1568 Huashan Road, Shanghai China P: +86 (021) 2208-5840 F: +86 (021) 2208-5866S PX Korea#940-1 Y erim-RiJeonggwan-Myeon Gijang-Gun, Busan, Rep. of Korea P: +82 (51) 728-5360 F: +82 (51) 728-5359。

VSX-6156-V2DM&P Vortex86SX 300MHz PC/104 CPU Modulewith 4S/2USB/3LAN/GPIO128MB DDR2 OnboardUser’s Manual(Revision 1.1A)CopyrightThe information in this manual is subject to change without notice for continuous improvement in the product. All rights are reserved. The manufacturer assumes no responsibility for any inaccuracies that may be contained in this document. And makes no commitment to update or to keep current the information contained in this manual.No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part, in any form or by any means without the prior written permission of the ICOP Technology Inc..©Copyright 2007 ICOP Technology Inc.Manual No. IUM6156-V2000-01 Ver.1.0A December, 2009Manual No. IUM6156-V2000-01 Ver.1.1A May, 2010Trademarks AcknowledgmentVortex86SX™ is the registered trademark of ICOP Technology Inc.Other brand names or product names appearing in this document are the properties and registered trademarks of their respective owners. All names mentioned herewith are served for identification purpose only.T a b l e o f C o n t e n t sT a b l e o f C o n t e n t s (iii)C h a p t e r 1 Introduction (1)1.1 Packing List (1)1.2 Product Description (2)1.3 Specifications (3)1.4 Board Dimension (5)C h a p t e r 2 Installation (6)2.1 Board Outline (6)2.2 Connectors & Jumpers Location (7)2.3 Connectors & Jumpers Summary (9)2.4 Pin Assignments & Jumper Settings (11)2.5 System Mapping (19)2.6 Watchdog Timer (22)2.7 GPIO (23)2.8 SPI flash (24)C h a p t e r 3 Driver Installation (25)Appendix (26)A. TCP/IP library for DOS real mode (26)B. BIOS Default Setting (27)Warranty (28)C h a p t e r 1 Introduction1.1 Packing ListProduct NamePackageVSX-6156-V2Embedded Vortex86SX CPU All-in-One Board Manual & Drivers CD x 1 RS232 cable x 4 PRINT cable x1 IDE cable x 1USB cable x 1 (USB port x 2) LAN cable x 3 GPIO cable x 1 PS/2 Mouse cable x 1 PS/2 Keyboard cable x 1 Screw Kit x 11.2 Product DescriptionThe VSX-6156-V2 family of low-power x86 embedded controller is designed to meet PC/104 specification, and integrated with the following features.300MHz Vortex86SX System-On-Chip 128 / 256 MB DDR2 system memory Enhanced IDE10/100Mbps Ethernet x 32 USB 2.0 (host)Up to 4 serial portsParallel port16-bit GPIOs Onboard 2MB SPI FlashMeet PC/104 stacking spec.2 watchdog timerJTAG interfaceAMI BIOSSingle voltage +5V DCSupport extended operatingtemperature range of -20°C to +70°CThe VSX-6156-V2 PC/104 family of embedded controller is designed with backward compatibility in mind, to provide migration path for projects facing end-of-life challenges with their existing x86 based PC/104 controller. The VSX-6156-V2 family of controller is designed as a plug in replacement, with backward compatibility to support legacy software to help extend existing product life cycle without heavy re-engineering.VSX-6156-V2 is suitable for broad range of data-acquisition, Industrial automation, Process control, Automotive controller, AVL, Intelligent Vehicle management devic,Medical device, Human machine interface, Robotics, machinery control And more…application that required small footprint, low-power and low-cost hardware with open industry standard such as PC/104.1.3 SpecificationsFeatures VSX-6156-V2CPU DM&P SoC CPU Vortex86SX- 300MHzReal Time Clock with Lithium Battery Backup Cache L1:16K I-Cache, 16K D-CacheBIOS AMI BIOSBus Interface PC/104 Standard CompliantSystem Memory 128 / 256MB DDR2 OnboardWatchdog Timer Software programmable from 30.5 us to 512 seconds x2sets(Watchdog 1 fully compatible with M6117D) LAN Integrated 10/100M EthernetRealtek 8100B 10/100Mbps Ethernet ControllerHalf/Full duplex capabilityI /O Interface Enhanced IDE port x1RS-232 port x3RS-232/422/485 port x1 (RS485: Auto Direction)Parallel port x1USB port x2 (USB 2.0 version)16-bit GPIO port x110/100Mbps Ethernet port x3Connectors2.00 mm ∅ 44-pin box header for IDE x12.00 mm ∅ 26-pin box header for Print x12.00 mm ∅ 20-pin box header for 16-bit GPIO x12.00 mm ∅ 10-pin box header for RS-232 x42.00 mm ∅ 10-pin box header for USB x12.00 mm ∅ 8-pin header for LAN x 32.54 mm ∅ 5-pin box header for Keyboard x12.54 mm ∅ 4-pin header for DC-in x12.54 mm ∅ 3-pin header for RS-485 x12.54 mm ∅ 5-pin header for Mouse x12.54 mm ∅ 2-pin header for Reset x12.54 mm ∅ 7-pin header for Redundancy x1(Opt.)2.54 mm ∅ 2-pin header for SYS-Fail-SW x1(Opt.)1.25 mm ∅ 6-pin Wafer for JTAG x1Flash Disk Support Onboard 2MB SPI Flash Disk (Driver: A)44-pin IDE Flash Disk( EmbedDisk 16MB or above) SRAM support 512KB (Optional)Power Requirement Single Voltage +5V@ 440mADimension 90 X 96mm (3.54 x 3.77 inches)Weight 84gOperating Temperature -20o C ~ +70o C-40°C ~ +85°C (Optional)1.4 Board DimensionC h a p t e r 2Installation2.1 Board Outline(Note1: COM2 RS232/422/485 is selected by BIOS setting) (Note2: Redundancy Signal and System-Fail-SW are optional) (Note3: COM1/COM2/COM3/COM4 TTL are optional)2.2 Connectors & Jumpers LocationJumpers & LEDs2.3 Connectors & Jumpers SummarySummary TableNbr Description Type of Connections Pin nbrs.J1 IDE Box Header, 2.0∅ ,22x2 44-pinJ2 USB Box Header,2.0∅ , 5x2 10-pinJ4 LAN 1 Pin Header, 2.0∅ , 4x2 8-pinJ5 JTAG Box Header, 125∅ , 6x16-pinJ6 Reset Pin Header, 2,54∅,1x2 2-pinJ7 Redundancy (Optional) Pin Header, 2.54∅, 7x1 7-pinJ8 System –Fail-Switch (Optional) Pin Header, 2.54∅ , 2x1 2-pinJ9 PS/2 Keyboard Box Header, 2,54∅,1x5 5-pinJ10 PS/2 Mouse Pin Header, 2,54∅,1x5 5-pinJ11 COM1(GPIO4/TTL Optional) Box Header, 2.0∅ 5x2 10-pin J12 COM2(RS232/422/485) Box Header, 2.0∅ 5x2 10-pinJ13 GPIO ( Port 0 / 1 ) Box Header, 2.0∅ ,10x2 20-pinJ15 RS-485 (Auto direction) Molex Header,2.54∅, 3x1 3-pinJ16 Power Connector Terminal Block 5.0∅,2x1 2-pinJ17 COM3 Box Header, 2.0∅ 5x2 10-pinJ18 PRINT Box Header, 2.0∅ , 13x2 26-pinJ19 COM4 Box Header, 2.0∅ 5x2 10-pinJ20 PC104 Connector – 64 pin Box Header, 2.54∅ 32x2 64-pinJ21 PC104 Connector – 40 pin Box Header, 2.54∅ 20x2 40-pinJ22 4P Power Source (Interconnect toPin Header, 2.54∅ , 4x1 4-pin PC/104 – J20)J36 LAN 2 Pin Header, 2.0∅ , 4x2 8-pinJ37 LAN 3 Pin Header, 2.0∅ , 4x2 8-pinJ38 BUZZER Pin Header, 2.54∅ , 2x1 2-pinJ39 Console Redirection Pin Header, 2.54∅ , 2x1 2-pin Power Active LED (Red) LED-SMDPWR-LEDIDE Active LED (Green ) LED-SMDIDE-LEDMTBF-Out (Orange) LED-SMDMTBF-LEDLED 4 LAN Link/Active LED (Green) LED-SMDLED 5 LAN Duplex LED ( Yellow ) LED-SMD LED 6 LAN Active LED (Green) LED-SMD LED 7 LAN Link LED ( Yellow ) LED-SMD LED 8 LAN Active LED (Green) LED-SMD LED 9 LAN Link LED ( Yellow ) LED-SMD2.4 Pin Assignments & Jumper SettingsJ1: IDE (44 Pins)J2: USB Pin # Signal Name Pin # Signal Name1 VCC2 VCC3 LUSBD3-4 LUSBD2-5 LUSBD3+6 LUSBD2+7 GND8 GND9 GGND 10 GGND Pin # Signal Name Pin # Signal Name1 IDERST2 GND3 IDED74 IDED85 IDED6 6 IDED97 IDED58 IDED109 IDED4 10 IDED11 11 IDED3 12 IDED12 13 IDED2 14 IDED13 15 IDED1 16 IDED14 17 IDED0 18 IDED15 19 GND 20 NC 21 IDEREQ 22 GND 23 IDEIOW 24 GND 25 IDEIOR 26 GND 27 ICHRDY 28 GND 29 IDEACK 30 GND 31 IDEINT 32 NC 33 IDESA1 34 IDECBLID 35 IDESA0 36 IDESA2 37 IDECS-0 38 IDECS1 39 IDELED 40 GND 41 VCC 42 VCC 43 GND 44 NCJ4: LAN1Pin # Signal Name Pin # Signal Name1 ATX+2 ATX-3 ARX+4 LED05 LED0+6 ARX-7 LED1+ 8 LED1J5: JTAGPin # Signal Name Pin # Signal Name1 VCC2 GND3 TCK4 TDO5 TDI6 TMSJ6: RESETPin # Signal Name Pin # Signal Name1 Reset2 GNDJ7: Redundancy (Optional)Pin # Signal Name Pin # Signal NameSYS-FAIL-OUT1 GND 23 SYS-FAIL-IN4 GPCS05 SYS-GPCS-IN6 TXD9\7 RXD9\J8: Redundancy (System-Fail-Switch) (Optional) Pin # Signal Name1 SYS-SW-IN2 GNDJ9: PS/2 KeyboardPin # Signal Name Pin # Signal Name1 KBCLK2 KBDAT3 NC4 GND5 VCCJ10: PS/2 MousePin # Signal Name Pin # Signal Name1 MSCLK2 MSDATA3 NC4 GND5 VCCJ11: COM 1 (GPIO4/TTL Optional)Pin # SignalNamePin #SignalName1 DCD12 RXD13 TXD14 DTR15 GND6 DSR17 RTS1 8 CTS19 RI1 10 NCJ12: COM2 RS232 / 422 / 485 (Optional: TTL)Pin # Signal Name Pin # Signal Name1 DCD2/ 422TX- / RS485-2 RXD2 / 422TX+ / RS485+3 TXD2/422RX+ 4 DTR2/422RX-5 GND6 DSR27 RTS28 CTS29 RI2 10 NCJ13: GPIO (Port 0 / 1)Pin # Signal Name Pin # Signal Name1 GND2 VCC3 GP004 GP105 GP016 GP117 GP02 8 GP129 GP03 10 GP1311 GP04 12 GP1413 GP05 14 GP1515 GP06 16 GP1617 GP07 18 GP1719 VCC 20 GNDJ15: RS485 (Auto direction)Pin # Signal Name1 RS485＋2 RS485－3 GNDJ16: Power Connector (Terminal Block 5.0mm) Pin # Signal Name1 +5V2 GNDJ17: COM3 (Optional: TTL)Pin # Signal Name Pin # Signal Name1 DCD32 RXD33 TXD34 DTR35 GND6 DSR37 RTS3 8 CTS39 RI3 10 NCJ18: PRINTPin # Signal Name Pin # Signal Name1 STB- 14 AFD-2 PD0 15 ERR-3 PD1 16 INIT-SLIN-4 PD2 175 PD3 18 GND6 PD4 19 GND7 PD5 20 GND8 PD6 21 GND9 PD7 22 GND10 ACK- 23 GND11 BUSY 24 GND12 PE 25 GND13 SLCT 26 NCJ19: COM4 (Optional: TTL)Pin # Signal Name Pin # Signal Name1 DCD42 RXD43 TXD4 4 DTR45 GND6 DSR47 RTS4 8 CTS49 RI4 10 NCJ20: PC104 Connector – 64pinPin # Signal Name Pin # Signal Name* 2 GND1 IOCHCHKRESETDRV3 SD7 45 SD6 6 VCC7 SD5 8 IRQ99 SD4 10 -5V 11 SD3 12 DRQ2 13 SD2 14 -12V 15 SD1 16 OWS 17 SD0 18 +12V 19 IOCHRDY 20 GNDSMEMW*21 AEN 22*SMEMR 23 SA19 24* 25 SA18 26 IOW* 27 SA17 28 IOR* 29 SA16 30 DACK3 31 SA15 32 DRQ3* 33 SA14 34 DACK1 35 SA13 36 DRQ1*REFRESH 37 SA12 3839 SA11 40 SYSCLK 41 SA10 42 IRQ7 43 SA9 44 IRQ6 45 SA8 46 IRQ5 47 SA7 48 IRQ4 49 SA6 50 IRQ3DACK2* 51 SA5 5253 SA4 54 TC 55 SA3 56 BALE 57 SA2 58 VCC 59 SA1 60 OSC 61 SA0 62 GND 63 GND 64 GNDJ21: PC104 Connector – 40pinJ22: 4P Power Source (Interconnect to PC/104 – J20) Pin # Signal Name1 -5V2 -12V3 +12V4 GNDPin # Signal Name Pin # Signal Name1 GND2 GND3 MEMCS16 *4 SBHE *5 IOCS16 * 6 SA237 IRQ10 8 SA229 IRQ11 10 SA2111 IRQ12 12 SA2013 IRQ15 14 SA1915 IRQ14 16 SA1817 DACK0 * 18 SA1719 DRQ0 20 MEMR *21 DACK5 * 22 MEMW *23 DRQ5 24 SD825 DACK6 * 26 SD927 DRQ6 28 SD1029 DACK7 * 30 SD1131 DRQ7 32 SD1233 VCC 34 SD1335 MASTER * 36 SD1437 GND 38 SD1539 GND 40 NCJ36: LAN2Pin # Signal Name Pin # Signal Name1 TX+12 TX-13 RX+14 LED015 LED01+6 RX-17 LED11+ 8 LED11J37: LAN3Pin # Signal Name Pin # Signal Name1 TX+2 2 TX-23 RX+24 LED025 LED02+6 RX-27 LED12+ 8 LED12J39: Console RedirectionPin # Signal Name Pin # Signal Name1 Console2 GND2.5 System Mapping2.6 Watchdog TimerThere are two watchdog timers in Vortex86SX/DX CPU. One is compatible with M6117D watchdog timer and the other is new. The M6117D compatible watchdog timer is called WDT0 and new one is called WDT1.We also provide DOS, Linux and WinCE example for your reference. For more technical support, please visit: /tech or download the PDF file:/tech/vortex86dx/2.7 GPIO (General Purpose Input / Output)40 GPIO pins are provided by the Vortex86SX/DX for general usage in the system. All GPIO pins are independent and can be configured as inputs or outputs, with or without pull-up/pull-down resistors.We also offer DOS, Linux and WinCE example for your reference. For more technical support, please visit: /tech or download the PDF file:/tech/vortex86dx/2.8 SPI flash (Serial Peripheral Interface)As SPI Flash (Serial Peripheral Interface) offers many benefits including: reduced controller pin count, smaller and simpler PCBs, reduced switching noise, less power consumption, and lower system costMany of users may consider using a formatted SPI flash to boot for the system or emulate SPI flash as Floppy (A: Driver or B: Driver). Then you must know how to set for this condition in CMOS Setup and boot up under DOS 6.22, X-DOS, DR-DOS and Free DOS.For more technical support, please visit: /tech or download the PDF file: /tech/vortex86dx/C h a p t e r 3Driver InstallationLANThe Vortex86SX processor also integrated 10/100Mbps Ethernet controller that supports both 10/100BASE-T and allows direct connection to your 10/100Mbps Ethernet based Local Area Network for full interaction with local servers, wide area networks such as the Internet.The controller supports: Half / Full-Duplex Ethernet function to double channel bandwidth, auto media detection.Operating system supportThe Vortex86SX-6156-V2 PC/104 CPU board supports Embedded software: Free DOS, DOS 6.22, PCDOS 7.1, DR-DOS, x-DOS, OS/2, Windows CE 5.0 / 6.0Please get the drivers from the Driver CD which attached with the standard packing ofVortex86SX-6156-V2 board or please get it from DMP official website:/tech/vortex86sx/Vortex86SX-6156-V2 also supports most of the popular Linux distributions, for more detail information, please visit DMP official website: /tech/vortex86sx/AppendixA. TCP/IP library for DOS real modeDSock is a TCP/IP library for DOS real mode, which is used by RSIP. It provides simple C functions for programmer to write Internet applications. ICOP also provide Internet examples using DSock: BOOTP/DHCP, FTP server, SMTP client/server, HTTP server, TELNET server, Talk client/server, etc.DSock provides a lot of example source code. Programmer can add Internet functions to their project easily and save development time. With a utility "MakeROM”, programmer also can make a ROM image to fit their application, those examples can be seen in the following Application systems: Mity-Mite Serial Server,Web Camera Tiny Server and RSIP Serial Server.DSock is free for All ICOP products using M6117D/Vortex86/Vortex86SX/Vortex86DX CPU and ICOP also provide the business version of DSock for those customers who are using other x86 CPUs.If you would like to use DSock or business version of DSock, Please mail to *************.tw or contact your regional sales.Please download the trial DSock software and Utilities from our website:/tech/dmp-lib/dsock/B. BIOS Default settingIf the system cannot be booted after BIOS changes are made, Please follow below procedures in order to restore the CMOS as default setting.Press “End” Key, when the power onPress <Del> to enter the AMI BIOS setupPress “F9” to Load Optimized DefaultsPress “F10” to Save configuration changes and exit setupWarrantyThis product is warranted to be in good working order for a period of one year from the date of purchase. Should this product fail to be in good working order at any time during this period, we will, at our option, replace or repair it at no additional charge except as set forth in the following terms. This warranty does not apply to products damaged by misuse, modifications, accident or disaster. Vendor assumes no liability for any damages, lost profits, lost savings or any other incidental or consequential damage resulting from the use, misuse of, originality to use this product. Vendor will not be liable for any claim made by any other related party. Return authorization must be obtained from the vendor before returned merchandise will be accepted. Authorization can be obtained by calling or faxing the vendor and requesting a Return Merchandise Authorization (RMA) number. Returned goods should always be accompanied by a clear problem description.Vortex86SX-6156-V2 Vortex86SX™ PC/104 CPU Module 28。

Boeing C-17 Transport2 EATON Aerospace C5-14G April 2014Eaton is a recognized leader in the aerospace industry and is a key supplier of hydraulics, fuel, conveyance and actuation products on the C-17. With this cutting edge technology, Eaton provides a broad array ofproducts including a 4000 psi quad-redundant hydraulic system. Two of four systems are connected using a reversible motorpump, in case ofemergency shutdown of any engine. All four systems incorpo-rate a primary and secondary engine-driven pump, part of Eaton's Vickers ® product line, ensuring a constant supply of hydraulic power during all phases of flight. Underemergency conditions, hydraulic power is generated by a ram air turbine (RAT) pump, which is deployed automatically and drives an Eaton pump.The C-17's unique capability to land on short runways is assisted by Eaton's pitch trim motors. The pitch trim motors position the horizontal stabilizer during the short landings and takeoffs for optimal performance.The C-17 hydraulic system incor-porates main engine and AC motor-driven pumps as well as pitch trim and OBIGGS drive motors. Eaton also provides additional system hydraulic and pneumatic units. These include servo control valves, a brake pressure metering valve, winch modules and a cargo AirDelivery System (ADS) control manifold. Electrical equipment provided by Eaton includes the Auxilary Power Unit (APU) air inlet actuator, ramp lock, logistic rail locks and RAT release actuator.The C-17 is also equipped with Eaton fluid health monitoring technology. The magnetic chip collectors, electro-optic and float activated sensors and system check valves are on allsecondary power systems. These products are primarily used to monitor harmfulmaterials in the flow of hydraulic and lube fluids during the run time of the aircraft.Other products on the C-17 include Eaton’s Aeroquip ®product line of quick disconnect couplings and self sealing “B”nut fittings and hose products, including high pressure Kevlar ® hoses. In addition, Eaton provides thepylon-mounted main fuel line for each engine, incorporating two quick disconnects into a convo-luted hose joined with a complex bent tube.Eaton also provides fuel boost pumps and canisters which were specifically designed for the C-17. They were designed and manufactured to provide excellent pumping performance at high climb rates and altitudes with many different types of fuel. To enhance fire safety, Eaton also provides the aircraft mounted valves that control the flow of nitrogen gas from the OBIGGS system to the fuel tanks.The United States Air Force Boeing C-17 Globemaster III is a high-wing, four-engine, T-tailed aircraft with a rear-loading ramp. It is 174 feet in length, has a height of 55.08 feet and a wingspan of 169.75 feet. Maximum takeoff gross weight is 585,000 lbs; maximum payload is 164,900 lbs. It was designed to expand the capability of the AirMobility Command (AMC) by enabling the long distance transport of troops and heavy combat equipment directly to small austere landing sites. The austere landing site capability of the aircraft is further enhanced by having all systems fully independent of ground support equipment.The Boeing C-17 alsoembodies Short T akeoff and Landing (STOL) technology. The unique ability to land cargo on very short airstrips and then take off again is achieved through theutilization of propulsive lift aerodynamics and advanced composite structures for lighter weight.The aircraft is powered by four Pratt & Whitney PW2040 series (Boeing 757 Derivative) turbofan engines, designated by the Air Force as F117 PW-100, each producing 40,440 lbs of thrust, located on pylons ahead of andbelow the wing leading edge. Engine thrust is blown through the fully extended flaps to create additional lift. This feature is useful in short takeoff and landings, and in low speed maneuvers. The engines are also equipped with directed-flow thrust reversers capable of deploy-ment in flight. On theground, a fully loaded aircraft using engine thrust reversers, can back up a 2% slope.Boeing C-17 Component and Systems OverviewEaton’s Aerospace Product Capabilitiesmponent and Systems OverviewEATON Aerospace C5-14G April 2014 31234567891011121314151617181920212324252627282930313940412232333435363738Eaton’s Boeing C-17 Systems Components6.OBIGGS LP Valve7.OBIGGS Compressor Motor8.OBIGGS II Super Joint Assembly9.OBIGGS HP Valve 10.Fuel Boost Pump11.Fuel Crossfeed Gate Valve 12.Float Activated Level Sensors 13.Main Fuel Line14.Low Flow Shutoff Valve 15.Breathers16.Engine-Driven Pumps 17.Dual Brake Metering Valves 18.AC Motorpump19.Fluid Conveyance Line Assembly 20.RAT Pump21.RAT Release Actuator22.Steering & Bypass Control Valves 23.Pitch Trim Motors24.Variable Restraint Assembly 25.Gate Release Assembly26.Ramp Lock Actuator 27.Winch Control Module 28.Cargo Rail Actuator29.Cable Tension Arm Assembly 30.Flap/Slat Position Transmitter 31.APU Air Inlet Actuator 32.Aft/Flap Slat Module33.Ratio Changer Actuator - Aileron Ratio Changer Assembly34.Rudder Cable Control Assembly 35.Aileron Load Feel Assembly 36.Rudder Load Feel Assembly 37.Trim Actuator Control,Elevator Load Feel Assembly38.Control Stick Rudder Pedal Assembly, Park Brake Mechanism39.Cargo Air Delivery Manifold 40.Stabilzation Strut System 41.Levelmaster ®1.Magnetic Chip Collectors2.Differential Pressure Switch3.Hydraulic Pressure Switch4.Mainshaft Carbon Seals5.Gear Box Seals4 EATON Aerospace C5-14G April 2014145/155 Series Soft Seal Ground Support CouplingsEaton's 145/155 series couplings have been the industry standard for ground service applications for over 50 years. During this time the design has been continuously improved to increase reliability, safety and ease of operation. Improvements have been made to include elastomeric soft seals in both the aircraft half and ground cart half to virtually eliminate fluid spillage and air inclusion during operation, and blunt start threadsto prevent cross threading.Main Fuel Line Eaton's main fuel line provides fuelfrom the engine pylon to the engine fuel pumps on each C-17 engine. The product features 2-in diameter convoluted T eflon ® hoses, covered with slip-on silicon fire protection sleeves, and integrally mated with two quick disconnect coupling halves and a complex bent tube. The convoluted hose combines the routing flexibility of lightweight rubber hose with the temperature range and fluid compatibility of T eflon. The assembly can be disconnected from the pylon withno fuel spillage.1817 Low Profile Ball Bearing Plane Swivel JointsRotational movement in the landing gear hydraulic system of the C-17 is supplied by Eaton 1817 series low profile ball bearing plane swivel joints. The 1817 series was designed and qualified to MIL-J-5513 for low torque, high side load applications.Flexible Hose Assemblies Eaton's hose assemblies are utilized extensively throughout the C-17 aircraft. The assemblies can be found in the hydraulic system, the oxygen system, the fuel system and lube oil system. Eaton provides lightweightNomex braided, convoluted hose assemblies to AS1227. Kevlarreinforced T eflon ® hoses toAS4623 are used in the 4,000-psi (27579 kPa) hydraulic system offering a significant weightsavings over more traditional wire reinforced hose assemblies.Low Profile, Self-Sealing Hydraulic "B" Nut Fittings Eaton's low profile, self-sealing hydraulic "B" nut fittings, offer a small envelope size with minimal weight. The "B" nut design is for both 4,000 psi high pressure and low pressure hydraulic systems used on the Boeing C-17.OBIGGS II Flex-CouplingAssemblyEaton provides its flex-coupling assembly that supports the second generation on-board inert gas generator system that replaces gas bottles used in older generation aircraft and replaces a first generation OBIGGS system.Mainshaft SealsMainshaft seals are used along the aircraft engine main shaft, sealing in lubrication of themain bearings.Gearbox SealsGearbox seals are installedin the engine gearbox that contains bearing lubrication which the accessories receive their power. This includes acces-sories that power the ancillary functions around the engine including the starter, fuelcontrols, fuel pumps, hydraulicpumps, and more.Magnetic Chip Collectors The C-17 engine oil system incorporates Eaton’s magnetic chip collectors for the capture of ferrous engine wear debris. These collectors have a self-closing valve which will prevent oil leaks up to 300 psig (20.69 bar), and rare earth magnets foreffective debris capture over long periods of time.System Check ValveThe C-17 integrated drive gener-ator (IDG) contains an Eaton 2C6107 system check valve. This valve has a 10 micron sintered disc for filtering capability, and a flow restrictor that controls air flow through the valve.Float-Activated Level Sensor The 2E6139 float-activated liquid level sensor is located in the C-17 integrated drive generator. The sensor, weighing approxi-mately 30 grams, providesfeedback upon sensing an insuf-ficient fluid level in the IDG.Breather (supplied to Hamilton Sundstrand)Eaton’s breather provides pressure equalization and air filtration for the lubrication circuit for the OBIGGScompressor. The filter element is made of corrosion resistant mono filament material.5 Cargo/Air Delivery System(ADS) Control ManifoldThe cargo/ADS control manifold isdesigned for air drop operationsand on/off loading on the ground.The cargo/ADS control manifoldcontains all valving necessary tocontrol the cylinders in the aerialdelivery system including thecargo ramp, ramp latches, ramptoes, and cargo door actuators.It also controls the cargo doorup and down locks, the left andright drouge parachute and thedeploy mechanisms, and thetow/release and drogue chutejettison mechanism. Themanifold can be operatedelectrically from the forwardloadmaster station, or manuallyfrom the rear station.Winch Control ModuleEaton’s control moduleprovides control of fluid flow tothe hydraulic motor operatedwinch when commanded by theloadmaster. The moduleregulates hydraulic flow inresponse to an electrical inputcommand from the winchcontrol panel.The winch control moduleconsists of a servo valve, reliefvalve across the motor ports,anti-cavitation make up checkvalve and two inlet pressureblocking valves. One is usedfor the winch brake releaseand the other is for control ofthe hydraulic motor dualspeed feature.Dual Brake PressureMetering Valve AssemblyThese valve assemblies areinstalled in the landing gearwheel well and are controlled bythe pilot through a mechanicalclosed loop cable system. Theassembly controls the hydraulicactuation pressures to thebrakes as a function of inputposition from the rudder pedals.Included in the assembly aretwo force command meteringvalves for modulating brakepressure and a despin actuatorto stop the wheels fromspinning upon landing gearretraction.Steering and BypassControl ValvesThe C-17 hydraulic systemincludes a set of nosewheelsteering controls and nosewheelsteering bypass valves. Thebypass valve is used to unloadthe steering actuators duringtowing and allows for centeringof the nose gear while beingstowed. The steering valvereceives a clockwise or counter-clockwise manual input from therudder pedals, and provideshydraulic fluid flow to thenosewheel steering controlactuators. Position feedback tothe valve is achieved through aclosed loop cable system. Thevalves are tandem redundant,dual system with rip stopconstruction between the twohydraulic systems.Pitch T rim Actuator MotorThe C-17 pitch control ismaintained by a rotary actuatorlocated in the aircraft empen-nage. The pitch trim actuatormotor provides positional controlof the horizontal stabilizer. TwoEaton bi-directional inlinehydraulic motors, with adisplacement of .22 cu in/rev(3.60 ml/rev), produce a theoret-ical torque of 137 in-Ibs at3900 psi (26,889 kPa) pressuredifferential. The motor isdesigned to withstand twomillion reverse load cycles, and2000 psi return pressure. TheMF3-022 motor contains anti-cavitation check valves andweighs 6.2 Ibs (2.81 kg).Engine-Driven Hydraulic PumpThe unique design and constructionof Eaton's 4000 psi (27,579 kPa)pumps allow them to operate atrelatively high efficiencies, thusenabling each unit to generatenearly 80 hydraulic horsepower.Additional features of the pumpsinclude an electrical depressuriza-tion valve (EDV), a blocking valve,and an inlet boost impeller. Thepackage also weighs less than28 Ibs dry. (12.25 kg).OBIGGS CompressorDrive MotorThe OBIGGS compressor isdriven by Eaton's inline,constant speed hydraulic motorwhich features integral speedcontrol and an electricallyoperated shut-off valve. When28 VDC is applied to thesolenoid, the motor will rotate,creating a constant speedbetween 2250 and 2550 rpm,over the power range requiredby the compressor output flow.Motor displacement is .598 cuin/rev (9.80 ml/rev). The weightof the OBIGGS drive motor andcontrols is 14.6 Ibs (6.62 kg).AC Motor-Driven PumpEaton provides four .42 cuin/rev (6.88 ml/rev) displacementAC motor-driven pumps peraircraft.The AC motor-driven provideflow to each of the four aircrafthydraulic systems. This allowsthe aircraft to be fully checkedout before flight without theneed of a ground cart. The ACmotor-driven is also used topower the on-board cargoloading system, and to stabilizethe aircraft during loading. Thevariable displacement motor-driven produces up to 10 gpm(37.87 L/min) at 6000 rpm. The3-phase, 200/115 volt, 400 Hzelectric motor is a dry rotor oiljacket cooled design withintegral thermal annunciation.Dry weight of this completeassembly is 42.5 1bs (19.28 kg).EATON Aerospace C5-14G April 20146 EATON AerospaceC5-14G April 2014Gate Release Assembly The Eaton Gate Release Actuator is used on the C-17 aircraft to trip cargo pallet tie-downs during airborne off-loading. Operation of the actuator is electrically controlled by the aircraft loadmaster.A 28 Vdc brush-type motor, directly coupled to a ballscrew, provides the quick retraction stroke required for a clean release of the load. An internal extension spring returns the actuator to the "locked"position after electrical power is removed.Rotary ActuatorEaton's rotary actuator operates the APU air inlet and consists of a reversible DC motor with an electrical brake. The brake isdisengaged when electric power is applied to the motor, and engaged when power is off, preventing the output shaft from being back driven.Rotation of the output shaft is controlled by applying voltage to the CW or CCW fields.Internal limit switches open at the end of the stroke to limit rotation of the outputshaft. Internal mechanical stops limit the travel in the event of an overrun of the electrical limit switchesAileron & Rudder T rim ActuatorEaton's actuator provides a linear output force which operates the slat hydraulic control valve and trims the aileron and rudder control systems on the C-17.The actuator is powered by two redundant DC motors. Four linear variable differential trans-formers (LVDT) are mounted integrally with the actuator housing and provides position feedback to the four flight control computers.A direct gear drive permitsindividual or simultaneous motor operation. Each motor is locked in position by a spring loaded brake. The brake holds the actuator in place and prevents backdriving of the other motor during single motor operation. Mechanical stops limits both extend and retract travel.Rudder Ratio Changer and Door Lock Actuator Eaton’s rudder travel actuator imparts controlled linear motion to change the rudder input to output ratio of the control mechanism. This feature is engaged when part or fullmanual reversion control of the aircraft surfaces is required. In this mode, the mechanicalinputs to the aileron and elevator control valves are changed depending on the authority required. The actuator consists of reduction gears, a screw jack, and attached fittings that are driven by an integral 28 Vdc electric motor. The actuator is capable of having its direction reversed at any intermediate position. Stroke reversal is accomplished by reversing DC voltage polarity to the motor by means of external switching. This function removes power from the motor at each end of the stroke.Fuel Crossfeed Gate Valve Eaton's crossfeed gate valve is a 2-1/2 inch gate valve used to control the transfer of fuel from one tank’s boost pumps toanother tank’s engine. The valve assembly consists of a tank mounted body assembly, amotor operated actuator, and an actuator support assembly. The actuator, gate body, and primary seals are interchangeable and removable without draining the tank. The weight of thecomplete valve assembly is 4.4lbs (2.0 kg).High and Low Pressure Regulating ValvesEaton's aircraft mountedpressure valves control the flow of nitrogen gas from theOnboard Inert Gas Generation System (OBIGGS) to the fuel tanks to enhance fire safety. Pressure regulation reduces the elevated pressure of the stored gas down to the near-atmospheric levels required for the fuel tanks. Each system comprises one High Pressure Regulating Valve (HPRV) and two Low Pressure Regulating Valves (LPRV), each incorporatingshut-off valves.Hydraulic Pressure SwitchThis small, lightweight, extremely reliable hydraulic pressure switch is usedextensively in aerospace and is qualified for both commercial and military applications. These Eaton switches are designed to be used in any fluid that is compatible with stainless steel or aluminum. The pressure switch design incorporates a snap-action electricalmicroswitch which is actuatedby a piston-sensing element.Levelmaster®The C-17 Levelmaster® provides four discrete bits of potable water level information. The assembly consists of fourelectro-optic sensors positioned at customer specified levels of: full, 2/3, 1/3 and empty. As liquid covers each prism point, a light is activated in a panel mounted indicator, providing level status. A press-to-test button on the indicator will energize those lights corresponding to thesensors which are not immersed in liquid.EATON Aerospace C5-14G April 20147Ramp Lock ActuatorEaton's ramp lock actuator provides control of the cargo ramp lock on the aircraft. A helical spring on the actuator helps to overcome flight loads and extends the actuator to release the ramp lock.The actuator is operated by a 28 Vdc motor driving through a two-stage spur gear drive train into a multiplate slip clutch and a ball screw assembly. Motor direction is controlled by electro-mechanical relays that areenergized and de-energized by the aerial delivery system controller. Actuator controlfeedback is provided by external position sensors. The multiplate slip clutch allows the actuator to be overridden in the event that power is lost to the actuator.Cargo Rail ActuatorEaton's cargo rail actuator is used to perform the lock/arm/release function for the cargo pallets constrained by cargo bay logistics and aerial delivery rails on the C-17 aircraft. The actuator is operated by a 115 Vdc, 400 Hz, three-phase motor that drives a reduction gear to a ball screw and output rod. The input gear for the ball screw is located between two pairs of Belleville spring washers, which absorb the peaks of shock loads when the output contacts the mechan-ical stops. The actuator is avail-able with or without a brake on the motor. The manual brake override allows the actuator to be back driven when power is removed.Fuel Boost Pump and Canister Eaton’s fuel boost pump is fitted in a tank mounted canister for ease of installation and to avoid draining the tank when removing the pump.It is specifically designed and manufactured to provide excel-lent pumping performance at high climb rates and altitudes with many different types of fuel. This pump has the ability to provide vapor free fuel, even at near boiling conditions, with hotvolatile fuels.RAT Deployment Actuator Eaton’s RAT actuator is a quick, short stroke device designed to release the latch that holds the ram air turbine in stowed position, on the aircraft.The actuator is operated by a 28 VDC motor splined directly to an acme screw. An acme nut, restrained from rotation by a spline interface with the housing, provides the linear action to position an output rod. An acme screw is held between two pairs of Belleville spring washers in contact with thrust bearings, which absorb peakshock loads when the output rod strikes the mechanical stops.Stabilization Strut System Eaton's stabilization strut system is used to stabilize the aircraft for cargo loading and unloading and to jack up the rear of the aircraft for changing the main landing gear tires. The system consists of four different compo-nents, the stabilization strut, the door deployment actuator, the control manifold, and the isola-tion valve. The control manifold is used to operate the system manually or electronically, and maintains a set pressure in the stabilization strut as cargo is loaded. The door actuator is used to open the strut compart-ment door to deploy the strut.Variable Restraint Assembly Eaton’s rotary actuators are used to adjust the release point on the variable restraint lock mechanisms on the aircraft’s aerial delivery rail.The actuator is powered by a bi-directional 115 VAC single phase motor. The motor has an integral brake which holds the output shaft in position when power is removed. The brake is released upon re-application of power.A film type multi-turn potenti-ometer is connected to the epicyclic gear train and is used to track the number of revolu-tions of the output shaft and displays the load setting at thesidewall control panel.Copyright © 2014 EatonTeflon® is a registered trademark of Dupont. All Rights ReservedForm No. C5-14GApril 2014EatonAerospace Group9650 Jeronimo Road Irvine, California 92618Ph 949 452-9500Fax 949 452-9555/aerospace。

迅达电梯300P 电器元件代号说明序号符号注解1 JDCW-* 轿厢选层第X 层的开关按钮(钥匙触点2 JDCW-D* 轿厢选层第X 层的下行开关按钮(钥匙触点3 JDCW-U*轿厢选层第X 层的上行开关按钮(钥匙触点 4 JDE-*厅站召唤第X 层的开关按钮 5 JDE-D*厅站召唤第X 层的下行开关按钮 6 JDE-U*厅站召唤第X 层的上行开关按钮 7 JDEV-*第X 层的楼层优先召唤钥匙按钮 8 JDEVG-*第X 层的楼层优先召唤钥匙按钮(钥匙触点 9 JDFDC轿厢按钮释放开关按钮(钥匙开关 10 JDNF-*第X 层的紧急召唤开关按钮(钥匙开关 11 JDNFG-*第X 层的楼层优先召唤钥匙按钮(钥匙开关 12 JDZHT-S 强迫关门停止开关按钮 13 JFCC编码的轿厢召唤释放开关 14 JFEFNO应急电源操作，救援运行释放开关 15 JFEFNOM应急电源操作，救援运行释放开关手册 16 JFITS安全回路对地漏电运行开关17 JH主电源开关 18 JHC轿厢止动开关 19 JHCT轿门止动开关 20 JHG 群控电源开关22 JHM 机房急停开关23 JHM10 MICONIC 10 主电源开关24 JHNS 应急电源主开关25 JHR 滑轮间急停开关26 JHRF 对接运行的急停开关27 JHSG 地坑急停开关28 JHSG1 地坑急停开关(最低层站29 JHTR 爬行控制的急停开关30 JHX 控制柜电源选择开关，中间部分31 JHZRS 目的层召唤控制电源开关32 JIB 运行开关33 JKL 读卡器开关34 JLAB 退出服务信号灯开关35 JLBS 井道照明开关36 JLC 轿厢照明开关37 JLF 学习运行开关38 JLI 司机控制开关39 JMOF 安装运行开关40 JNF 应急控制开关41 JNF-K 急停开关42 JNFE 紧急防盗服务开关43 JNFF 火警开关44 JNFF-F 火警释放开关46 JNO 应急电源操作(释放开关47 JPF 优先运行开关48 JRE 检修开关49 JREC 轿厢检修开关50 JRES检修开关 51 JRET轿门检修开关 52 JRF对接运行开关 53 JRH复位控制开关 54 JRV保留运行开关 55 JRVC轿厢保留运行开关 56 JRVM机房保留运行开关 57 JRVPC轿厢停靠保留开关 58 JS控制开关 59 J中国设计师网P搬运工/银行控制开关 60 JSLM机房照明控制开关 61 JSPC轿厢召唤堵塞开关序号符号注解 62 JSPCG群控召唤堵塞开关 63 JSPDC-*第X 层轿厢召唤堵塞开关64 JSPDEM机房内层站召唤堵塞开关 65 JSPS层站堵塞开关 66 JSPT-O开门堵塞开关 67 JSPT-S 关门堵塞开关69 JSSH 电源保安服务开关70 JSTUE1 厅门锁跨接开关71 JSTUE2 厅门锁跨接开关72 JT-O 开门开关73 JTHA 驱动的热敏开关74 JTHAS 控制柜热敏开关75 JTHAWT WITTUR 门机电源开关76 JTHB 制动热敏电阻77 JTHC 轿厢热敏电阻78 JTHLAB 退出服务灯热敏开关79 JTHM 机房热敏开关80 JTHMGB 电磁制动器的热敏开关81 JTHNGC 轿厢电源装置的热敏开关82 JTHNGG 群控电源的热敏开关83 JTHNGL 电梯电源的热敏开关84 JTHPG 群控印板的热敏开关85 JTHS 控制的热敏开关86 JTHSA 驱动控制的热敏开关87 JTHSK 安全回路的热敏开关88 JTHSZ 入口的热敏开关89 JTHSZG 梯群入口的热敏开关90 JTHT 门的热敏开关91 JTHTA 匹配变压器的热敏开关92 JTHTAH 匹配变压器的散热器的热敏开关93 JTHTAMGB 电磁制动器的匹配变压器开关 94 JTHTANS 应急电源的变压器热敏开关95 JTHTASPV 上行高峰矢量程序匹配变压器的热敏开关96 JTHTAX 中央控制器的匹配变压器的热敏开关97 JTHTC轿厢操纵盘内热敏开关 98 JTHTLAB退出服务灯变压器热敏开关 99 JTHTNORS应急电源变压器复位热敏开关 100 JTHTUV风扇电压变压器的热敏开关 101 JTHX中央控制器的热敏开关 102 JTR爬行控制开关 103 JTTC轿门隔离开关 104 JUEKBF火警跨接触点开关(火警探测器0 105 JUEKTS门厅跨接触点开关 106 JUEKTS-A厅门跨接外触点开关 107 JUEKTS-E厅门跨接触点开关 108 RET-O开门限位触点继电器 109 RET-S关门限位触点继电器 110 RF对接运行继电器 111 RFBE楼层照明释放继电器 112 RFE启动运行继电器 113 RFEF撤离运行释放继电器 114 RFF停止运行继电器 115 RFNO 应急电源操作继电器116 RFR 调节释放继电器117 RFT 强迫关门继电器118 RFUET 门跨接拖开继电器119 RH 第一速度主继电器120 RIB “在运行”继电器121 RIBF 消防信息继电器122 RICS- 轿厢位置编码器信息触点继电器123 RIDH1 保持按钮信息继电器124 RINFF 消防继电器125 RISPGC 内令存储阻断信息继电器序号符号注解126 RIT-S 关门信息继电器127 RKB 制动器监测继电器128 RKBI 涡流制动器监测继电器129 RKFMH 曳引电机磁场监测继电器 130 RKMH 曳引电机监测继电器131 RKPH 相位监测继电器132 RKTHMH 曳引电机热保护监测继电器133 RKU (22V电压监测继电器134 RKUET 门跨接监测继电器135 RKULC 轿内灯电源监测继电器 136 RKUS 静态变换器监测继电器 137 RKUSK 安全回路电压检查继电器138 RKV 门锁定检测继电器139 RKVZ 减速度检测继电器140 RL-A 安全板速度控制继电器141 RL-V 满载继电器142 RLAB “停止运行”信号灯继电器 143 RLAB-A “停止运行”信号灯继电器(断开144 RLB占用指示灯继电器 145 RLBM机房占用指示灯继电器 146 RLBS井道照明灯继电器 147 RLC轿内照明继电器 148 RLC-A轿内照明继电器(断开 149 RLI司机控制继电器 150 RLL-X超载信号灯继电器 151 RMGH制动器磁性继电器 152 RMGTC轿内操纵盘磁铁继电器 153 RMVE电机风扇继电器 154 RNF紧急运行继电器 155 RNFF消防运行继电器 156 RNI向下运行继电器 157 RNO应急电源工作继电器 158 RNT-O正常开门继电器 159 RNZK门监控时间元件 160 RPHT门光电管继电器 161 RPHTL门安全触板光电继电器 162 RPHTS 门光栅光电管继电器163 RR-D 下方向继电器164 2RR-D 第2入口侧下方向继电器165 RR-U 上方向继电器166 2RR-U 第2入口侧上方向继电器167 RRE 检修继电器168 RRE-A 检修继电器(断开 169 RRE-D 检修继电器向下 170 RRE-U 检修继电器向上 171 RRF 对靠运行继电器172 RRF-D 对靠运行继电器向下 173 RRF-U 对靠运行继电器向上 174 RRH 复位控制继电器175 RRSK 安全回路继电器 176 RRV 保留继电器177 RS 控制印板178 RSA 追最终位置接触器 179 RSE 井道端继电器180 RSE1 井道端继电器(第一速度 181 RSE2 井道端继电器(第二速度 182 RSE3 井道端继电器(第三速度183 RSIC SICURTRONIC 继电器184 RSK 安全回路继电器 185 RSM 故障信号继电器186 RSPE 阻断层楼继电器188 RSPFE 启动运行阻断继电器 189 RSPNI 向下运行阻断继电器 190 RSPNO 应急电源阻断继电器序号符号注解 191 RSPT门阻断继电器 192 RSPTC轿内操纵盘阻断辅助继电器 193 RSPV上高峰段继电器 194 RSPZS入口阻断继电器 195 RSS累加安全继电器 196 RSS2第二侧轿门累加继电器 197 RST-NU关门继电器(爬行 198 RST-O关门继电器 199 RST-S开门继电器蜂 200 RSUM蜂鸣继电器 201 RT-O门继电器-断开 202 RT-S门继电器-关闭 203 RTC轿门继电器 204 RTER变压器激励继电器205 RTHU变换装置热保护继电器 206 RTR-D爬行控制下行继电器 207 RTR-U爬行控制上行继电器 208 RTRF运行触发继电器 209 RTRT 门触发继电器211 RTS 厅门继电器 212 RTS2 第2侧厅门继电器 213 RTSC 厅轿门继电器 214 RU 变换器继电器 215 RU-E变换器继电器(接通 216 RUEJHC1轿门停止开关跨接继电器 217 RUET门跨接继电器 218 RUET-A门跨接继电器, 断开 219 RUET-E门跨接继电器, 接通 220 RV门锁定继电器 221 RVEC轿箱风扇继电器222 RVEC-A轿箱风扇继电器, 断开 223 RVRT门减速继电器 224 RVZ减速, 停止继电器 225 RY 星形连接继电器。

山特产品速查手册SANTAK PRODUCT QUICK REFERENCE 全面保护用心为安全2 | 山特产品速查手册目 录Contents后备式UPSTG-E1000/500, TG1000/500, ET1100/550, K500/K1000 PRO, MT500/1000, TG-BOX 600/850, SP-BOX 在线式UPS塔式C1-3K, 塔式C6-10K, 3C 10-20K, 机架式C1-3kVA Rack, 机架式C6-10kVA Rack, 3C3 Pro (20-200kVA), 3C3 Pro ISO (15 -200kVA), 3C3 HD (20-80kVA), 3C3 HD (400-600kVA),SPU1-20K 电力行业专用 UPS, SIU 10-200K 山特工业级 UPS 灵霄系列PT 3000 (1-3kVA), PT 3000 (6-20kVA)模块式UPSARRAY 3A3 Pro 系列 (15～150kVA), ARRAY 3A3 PT 系列 (25～200kVA), ARRAY 3A3 PT 系列 (60～600kVA)蓄电池C12系列电池, G 系列胶体蓄电池, ARRAY 系列蓄电池, SBC-A 电池柜微模块灵聚2.0微模块产品系列, 灵聚 2.0 Aisle 配电机柜配电单元 (PDU)精密空调全变频小型精密空调 (7.5-20kW), 定频小型精密空调(7.5-20kW), 双轴流小型机房空调, 机房专用空调(25-100kW), 列间精密空调 (SMCRC 系列)机柜S 系列机柜移动电站3-1314-3839-4546-4950-5455-606162-7273 74-75山特后备式TG-E系列UPS⸺美观时尚的“设备守护神”。

TG-E500/1000 UPS功能强大，集智慧、安全、可靠于一身，提升消费者在产品品质、观感、质感方面的使用体验。