WIN_55,212-2_Mesylate_HNMR_08993_MedChemExpress

1. IDENTIFICATION OF THE SUBSTANCE/TREPARATION AND THE COMPANY/UNDERTAKING3.HAZARDS IDENTIFICATION4. FIRST AID MEASURESMATERIAL SAFETY DATA SHEETProduct name:Supplier:Tel:EMERGENCY OVERVIEW: May cause skin irritation and/or dermatitisPrinciple routes of exposure: Inhalation: Ingestion: Skin contact: Eye contact:SkinMay cause irritation of respiratory tract May be harmful if swallowed May cause allergic skin reaction Avoid contact with eyesStatements of hazard MAY CAUSE ALLERGIC SKIN REACTION.Statements of Spill of Leak Label Eliminate all ignition sources. Absorb and/or contain spill with inert materials (e.g., sand, vermiculite). Then place in appropriate container. For large spills, use water spray to disperse vapors, flush spill area. Prevent runoff from entering waterways or sewers.General advice:POSITION/INFORMATION ON INGREDIENTSInhalation:Skin contact:Ingestion:Eye contact:Protection of first – aiders:Medical conditions aggravated by exposure: In the case of accident or if you fell unwell, seek medical advice immediately (show the label where possible).Move to fresh air, call a physician immediately.Rinse immediately with plenty of water and seek medical adviceDo not induce vomiting without medical advice.In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.No information availableNone knownSuitable extinguishing media:Specific hazards:Special protective equipment for firefighters:Flash point:Autoignition temperature:NFPA rating Use dry chemical, CO2, water spray or “alcohol” foam Burning produces irritant fumes.As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gearNot determinedNot determinedNFPA Health: 1 NFPA Flammability: 1 NFPA Reactivity: 0Personal precautions: Environmental precautions: Methods for cleaning up: Use personal protective equipment.Prevent product from entering drains.Sweep up and shovel into suitable containers for disposalStorage:7. HANDLING AND STORAGE5.FIRE-FIGHTING MEASURES6. ACCIDENTAL RELEASE MEASURESRoom temperature Handling:Safe handling advice: Incompatible products:Use only in area provided with appropriate exhaust ventilation.Wear personal protective equipment.Oxidising and spontaneously flammable productsEngineering measures: Respiratory protection: Skin and body protection:Eye protection: Hand protection: Hygiene measures:Ensure adequate ventilation.Breathing apparatus only if aerosol or dust is formed. Usual safety precautions while handling the product will provide adequate protection against this potential effect. Safety glasses with side-shieldsPVC or other plastic material glovesHandle in accordance with good industrial hygiene and safety practice.Melting point/range: Boiling point/range: Density: Vapor pressure: Evaporation rate: Vapor density: Solubility (in water): Flash point:Autoignition temperature:No Data available at this time. No Data available at this time. No data available No data available No data available No data available No data available Not determined Not determinedStability: Stable under recommended storage conditions. Polymerization: None under normal processing.Hazardous decomposition products: Thermal decomposition can lead to release of irritating gases and vapours such as carbon oxides.Materials to avoid: Strong oxidising agents.10. STABILITY AND REACTIVITY9. PHYSICAL AND CHEMICAL PROPERTIES8. EXPOSURE CONTROLS/PERSONAL PROTECTION11. TOXICOLOGICAL INFORMATIONConditions to avoid: Exposure to air or moisture over prolonged periods.Product information Acute toxicityChronic toxicity:Local effects: Chronic exposure may cause nausea and vomiting, higher exposure causes unconsciousness.Symptoms of overexposure may be headache, dizziness, tiredness, nausea and vomiting.Specific effects:May include moderate to severe erythema (redness) and moderate edema (raised skin), nausea, vomiting,headache.Primary irritation: Carcingenic effects: Mutagenic effects: Reproductive toxicity:No data is available on the product itself. No data is available on the product itself. No data is available on the product itself. No data is available on the product itself.Mobility:Bioaccumulation: Ecotoxicity effects: Aquatic toxicity:No data available No data available No data availableMay cause long-term adverse effects in the aquatic environment.12. ECOLOGICAL INFORMATION13. DISPOSAL CONSIDERATIONSWaste from residues/unused products:Contaminated packaging:Waste disposal must be in accordance with appropriate Federal, State and local regulations. This product, if unaltered by use, may be disposed of treatment at a permitted facility or as advised by your local hazardous waste regulatory authority. Residue from fires extinguished with this material may be hazardous.Do not re-use empty containers.UN/Id No:Not regulated14. TRANSPORT INFFORMATIONDOTProper shipping name: Not regulatedTGD(Canada)WHMIS hazard class: Non - controlledIMDG/IMOIMDG – Hazard Classifications Not ApplicableIMO – labels:15. REGULATORY INFOTMATION International Inventories16. OTHER INFORMATIONPrepared by: Health & SafetyDisclaimer: The information and recommendations contained herein are based upon tests believed to be reliable.However, XABC does not guarantee the accuracy or completeness NOR SHALL ANY OF THIS INFORMATION CONSTITUTE A WARRANTY, WHETHER EXPRESSED OR IMPLIED, AS TO THE SAFETY OF THE GOOD, THE MERCHANTABILITY OF THE GOODS, OR THE FITNESS OF THE FITNESS OF THE GOODS FOR A PARTICULAR PURPOSE. Adjustment to conform to actual conditions of usage maybe required. XABC assumes no responsibility for results obtained or for incidental or consequential damages, including lost profits arising from the use of these data. No warranty against infringement of any patent, copyright or trademark is made or implied.End of safety data sheet。

pPICZ A, B, and CPichia expression vectors for selection onZeocin™ and purification of recombinant proteins Catalog no. V190-20Rev. Date: 7 July 2010Manual part no. 25-0148MAN00000034User ManualiiTable of ContentsKit Contents and Storage (iv)Accessory Products (v)Introduction (1)Overview (1)Methods (3)Cloning into pPICZ A, B, and C (3)Pichia Transformation (9)Expression in Pichia (13)Purification (15)Appendix (17)Recipes (17)Zeocin™ (19)Map and Features of pPICZ A, B, and C (21)Lithium Chloride Transformation Method (23)Construction of In Vitro Multimers (24)Technical Support (32)Purchaser Notification (33)References (34)iiiKit Contents and StorageContents The following components are included with Catalog no. V190–20. Note that thepPICZ expression vectors are supplied in suspension.Component QuantityCompositionpPICZ A Expression Vector 20 μg 40 μl of 0.5 μg/μl vector in10 mM Tris–HCl, 1 mM EDTA,pH 8.0pPICZ B Expression Vector 20 μg 40 μl of 0.5 μg/μl vector in10 mM Tris–HCl, 1 mM EDTA,pH 8.0pPICZ C Expression Vector 20 μg 40 μl of 0.5 μg/μl vector in10 mM Tris–HCl, 1 mM EDTA,pH 8.0GS115/pPICZ/lacZ Positive1 stab --Control strainShipping/Storage The components included with Catalog no. V190–20 are shipped on wet ice.Upon receipt, store as directed below.For long-term storage of your positive control stab strain, we recommendpreparing a glycerol stock immediately upon receipt and storing at –80°C.Component ShippingStorage pPICZ A Expression Vector Wet ice Store at –20°CpPICZ B Expression Vector Wet ice Store at –20°CpPICZ C Expression Vector Wet ice Store at –20°CGS115/pPICZ/lacZ positive control strain Wet ice Store at 4°CivAccessory ProductsAdditional ProductsThe products listed in this section are intended for use with the pPICZ vectors.For more information, visit our web site at or contactTechnical Support (page 32).Product QuantityCatalogno. X-33 Pichia strain 1 stab C180-00GS115 Pichia strain 1 stab C181-00KM71H Pichia strain 1 stab C182-00SMD1168H Pichia strain 1 stab C184-00pPICZα A, B, and C 20 μg each V195-20pPIC6α A,B, and C 20 μg each V215-20pPIC6 A, B, and C 20 μg each V210-20pPIC6 Starter Kit 1 kit K210-01Original Pichia Expression Kit 1 kit K1710-01EasySelect™Pichia Expression Kit 1 kit K1740-01Pichia EasyComp™ Transformation Kit 1 kit K1730-01Pichia Protocols 1 book G100-01PureLink™ Gel Extraction Kit 50 preps250 prepsK2100–12K2100–25S.N.A.P ™ Gel Purification Kit 25 preps K1999–25PureLink™ Quick Plasmid Miniprep Kit 50 preps250 prepsK2100–10K2100–11PureLink™ HiPure Plasmid Midiprep Kit 25 preps50 prepsK2100–04K2100–13One Shot® TOP10 (chemically competent E. coli) 10 reactions20 reactionsC4040–10C4040–03One Shot® TOP10 Electrocompetent E. Coli 10 reactions20 reactionsC4040-50C4040-52TOP10 Electrocomp™ Kits 20 reactions C664–55Positope™ Control Protein 5 μg R900-50CIAP (Calf Intestinal Alkaline Phosphatase) 1,000 units 18009–019T4 DNA Ligase 100 units500 units15224–01715224–025Zeocin™ 1g5 gR250-01R250-05β-Gal Assay Kit 1 kit K1455-01β-Gal Staining Kit 1 kit K1465-01E-Gel® Agarose Gels E-Gel® Agarose Gels are bufferless, pre-cast agarose gels designed for fast, convenient electrophoresis of DNA samples. E-Gel® agarose gels are available in different agarose percentage and well format for your convenience.For more details on these products, visit our web site at or contact Technical Support (page 32).Continued on next pagevAccessory Products, ContinuedZeocin™Zeocin™ may be obtained from Invitrogen (see above). For your convenience, the drug is prepared in autoclaved, deionized water and available in 1.25 ml aliquotsat a concentration of 100 mg/ml. The stability of Zeocin™ is guaranteed for sixmonths if stored at –20°C.Detection of Fusion Protein A number of antibodies are available from Invitrogen to detect expression ofyour fusion protein from the pPICZ vector. Horseradish peroxidase (HRP)-conjugated antibodies allow one-step detection in Western blots usingcolorimetric or chemiluminescent detection methods. The amount of antibodysupplied is sufficient for 25 Western Blots.Antibody Epitope Catalogno.Anti-myc R950–25 Anti-myc-HRPDetects the 10 amino acid epitopederived from c-myc (Evans et al., 1985):EQKLISEEDLR951–25Anti-His(C-term) R930–25Anti-His(C-term)-HRPDetects the C-terminal polyhistidine(6xHis) tag (requires the free carboxylgroup for detection) (Lindner et al., 1997):HHHHHH-COOHR931–25Purification of Fusion Protein The polyhistidine (6xHis) tag allows purification of the recombinant fusionprotein using metal-chelating resins such as ProBond™. Ordering information forProBond™ resin is provided below.Product QuantityCatalogno. ProBond™ Purification System 6 purifications K850–01ProBond ™ Purification System with Anti-myc-HRP Antibody1 Kit K852–01ProBond ™ Purification System with Anti-His(C-term)-HRP Antibody1 Kit K853–01ProBond™ Nickel-Chelating Resin 50 ml150 mlR801–01R801–15Purification Columns 50 each R640–50viIntroductionOverviewIntroduction pPICZ A, B, and C are 3.3 kb expression vectors used to express recombinantproteins in Pichia pastoris. Recombinant proteins are expressed as fusions to aC-terminal peptide containing the c-myc epitope and a polyhistidine (6xHis) tag.The vector allows high-level, methanol inducible expression of the gene ofinterest in Pichia, and can be used in any Pichia strain including X33, GS115,SMD1168H, and KM71H. pPICZ contains the following elements:•5′ fragment containing the AOX1 promoter for tightly regulated, methanol-induced expression of the gene of interest (Ellis et al., 1985; Koutz et al., 1989;Tschopp et al., 1987a)•Zeocin™ resistance gene for selection in both E. coli and Pichia (Baron et al.,1992; Drocourt et al., 1990)•C-terminal peptide containing the c-myc epitope and a polyhistidine (6xHis)tag for detection and purification of a recombinant fusion protein (if desired)•Three reading frames to facilitate in-frame cloning with the C-terminalpeptideReference Sources The pPICZ A, B, and C expression vectors may be used with the Original Pichia Expression Kit, and are included in the EasySelect™Pichia Expression Kit (see page v for ordering information). Additional general information about recombinant protein expression in Pichia pastoris is provided in the manuals for the Original Pichia Expression Kit and the EasySelect™Pichia Expression Kit. For more information about the Original Pichia Expression Kit, the EasySelect™Pichia Expression Kit, or their manuals, visit our web site at or contact Technical Support (page 32).More detailed information and protocols dealing with Pichia pastoris may also be found in the following general reference:Higgins, D. R., and Cregg, J. M. (1998) Pichia Protocols. In Methods in Molecular Biology, Vol. 103. (J. M. Walker, ed. Humana Press, Totowa, NJ) (see page v for ordering information).Recommended Pichia Host Strain We recommend using the X-33 Pichia strain as the host for expression of recombinant proteins from pPICZ. Other Pichia strains including GS115, KM71H, and SMD1168H are suitable. The X-33 Pichia strain and other strains are available from Invitrogen (see page v for ordering information). The X-33 Pichia strain has the following genotype and phenotype:Genotype: Wild-typePhenotype: Mut+1Overview, ContinuedExperimental Overview The following table describes the basic steps needed to clone and express your gene of interest in pPICZ.Step Action1 Propagate pPICZ A, B, and C by transformation into a rec A, end A1E. coli strain such as TOP10, DH5 , or JM109.2 Develop a cloning strategy and ligate your gene into one of the pPICZvectors in frame with the C-terminal tag.3 TransformintoE. coli and select transformants on Low Salt LB platescontaining 25 μg/ml Zeocin™.4 Analyze 10–20 transformants by restriction mapping or sequencing toconfirm in-frame fusion of your gene with the C-terminal tag.5 Purify and linearize the recombinant plasmid for transformation intoPichia pastoris.6 TransformyourPichia strain and plate onto YPDS plates containing the appropriate concentration of Zeocin™.7 Select for Zeocin™-resistant transformants.8 Optimize expression of your gene.9 Purify your fusion protein on metal-chelating resin (i.e. ProBond™).Continued on next page2MethodsCloning into pPICZ A, B, and CIntroduction The pPICZ vector is supplied with the multiple cloning site in three readingframes (A, B, and C) to facilitate cloning your gene of interest in frame with theC-terminal peptide containing the c-myc epitope and a polyhistidine (6xHis) tag.Use the diagrams provided on pages 5–7 to help you design a strategy to cloneyour gene of interest in frame with the C-terminal peptide. Generalconsiderations for cloning and transformation are discussed in this section.General Molecular Biology Techniques For assistance with E. coli transformations, restriction enzyme analysis, DNA biochemistry, and plasmid preparation, refer to Molecular Cloning: A Laboratory Manual (Sambrook et al., 1989) or Current Protocols in Molecular Biology (Ausubel et al., 1994).E. coli Strain Many E. coli strains are suitable for the propagation of the pPICZ vectorsincluding TOP10, JM109, and DH5 . We recommend that you propagate thepPICZ vectors in E. coli strains that are recombination deficient (rec A) andendonuclease A deficient (end A).For your convenience, TOP10 E. coli are available as chemically competent orelectrocompetent cells from Invitrogen (page v).Transformation Method You may use any method of choice for transformation. Chemical transformation is the most convenient for many researchers. Electroporation is the most efficient and the method of choice for large plasmids.Maintenance of Plasmids The pPICZ vectors contain the Zeocin™ resistance (Sh ble) gene to allow selection of the plasmid using Zeocin™. To propagate and maintain the pPICZ plasmids, we recommend using the following procedure:e 10 ng of your vector to transform a rec A, end A E. coli strain like TOP10,DH5 , JM109, or equivalent (see above).2.Select transformants on Low Salt LB plates containing 25 μg/ml Zeocin™ (seepage 17 for a recipe).3.Prepare a glycerol stock from each transformant containing plasmid forlong-term storage (see page 8).Continued on next page3Cloning into pPICZ A, B, and C, ContinuedGeneral Considerations The following are some general points to consider when using pPICZ to express your gene of interest in Pichia:•The codon usage in Pichia is believed to be similar to Saccharomyces cerevisiae.•Many Saccharomyces genes have proven to be functional in Pichia.•The premature termination of transcripts because of "AT rich regions" has been observed in Pichia and other eukaryotic systems (Henikoff & Cohen, 1984; Irniger et al., 1991; Scorer et al., 1993; Zaret & Sherman, 1984). If you have problems expressing your gene, check for premature termination by northern analysis and check your sequence for AT rich regions. It may be necessary to change the sequence in order to express your gene (Scorer et al., 1993).•The native 5´ end of the AOX1 mRNA is noted in the diagram for each multiple cloning site. This information is needed to calculate the size of the expressed mRNA of the gene of interest if you need to analyze mRNA for any reason.Cloning Considerations For proper initiation of translation, your insert should contain an initiation ATG codon as part of a yeast consensus sequence (Romanos et al., 1992). An example of a yeast consensus sequence is provided below. The ATG initiation codon is shown underlined.(G/A)NNATG GTo express your gene as a recombinant fusion protein, you must clone your gene in frame with the C-terminal peptide containing the c-myc epitope and the polyhistidine tag. The vector is supplied in three reading frames to facilitate cloning. Refer to the diagrams on pages 5–7 to develop a cloning strategy.If you wish to express your protein without the C-terminal peptide, be sure to include a stop codon.Construction of Multimeric Plasmids pPICZ A, B, and C contain unique Bgl II and Bam H I sites to allow construction of plasmids containing multiple copies of your gene. For information on how to construct multimers, refer to pages 24–31.Continued on next page4Multiple CloningSite of pPICZ A Below is the multiple cloning site for pPICZ A. Restriction sites are labeled to indicate the cleavage site. The boxed nucleotides indicate the variable region.The multiple cloning site has been confirmed by sequencing and functionaltesting.You can download the complete sequence of pPICZ A from our web site at or by contacting Technical Support (see page 32).For a map and a description of the features of pPICZ, refer to the Appendix(pages 21–22). AAT AGC GCC GTC GAC CAT CAT CAT CAT CAT CAT TGTTCCTCAG TTCAAGTTGG GCACTTACGA GAAGACCGGT CTTGCTAGAT TCTAATCAAG AGGATGTCAG AATGCCATTT GCCTGAGAGA TGCAGGCTTC ATTTTTGATA CTTTTTTATTTGTAACCTAT ATAGTATAGG ATTTTTTTTG TCATTTTGTT 1218Asn Ser Ala Val Asp His His His His His His ***3´ AOX1 priming site TGA GTTTTAGCCT TAGACATGAC AACCTTTTTT TTTATCATCA TTATTAGCTT ACTTTCATAA TTGCGACTGG TTCCAATTGA CAAGCTTTTG ATTTTAACGA CTTTTAACGA CAACTTGAGA AGATCAAAAA ACAACTAATT ATTCGAAACG AGGAATTCAC GTGGCCCAGC CGGCCGTCTC GGATCGGTAC CTCGAGCCGC GGCGGCCGCC AGCTT GGGCCC GAA CAA AAA CTC ATC TCA GAA GAG GAT CTG 811Glu Gln Lys Leu Ile Ser Glu Glu Asp Leu 5´ AOX1 priming sitemyc epitope3´polyadenylation sitePolyhistidine tag5´ end of AOX1 mRNA Sfu I Eco R I Pml I Sfi I Bsm B I Asp 718 I Kpn I Xho ISac II Not I Apa I 104210981158871931991Continued on next pageMultiple CloningSite of pPICZ B Below is the multiple cloning site for pPICZ B. Restriction sites are labeled to indicate the cleavage site. The boxed nucleotides indicate the variable region.The multiple cloning site has been confirmed by sequencing and functionaltesting.You can download the complete sequence of pPICZ B from our web site at or by contacting Technical Support (see page 32).For a map and a description of the features of pPICZ, refer to the Appendix(pages 21–22). AAT AGC GCC GTC GAC CAT CAT CAT CAT CAT CAT TGA GTTTGTAGCC TTAGACATGA CTGTTCCTCA GTTCAAGTTG GGCACTTACG AGAAGACCGG TCTTGCTAGA TTCTAATCAA GAGGATGTCA GAATGCCATT TGCCTGAGAG ATGCAGGCTT CATTTTTGAT ACTTTTTTAT TTGTAACCTA TATAGTATAG GATTTTTTTT GTCATTTTGT TTC 1216Asn Ser Ala Val Asp His His His His His His ***3´ AOX1 priming site TGA GTTTGTAGCC TTAGACATGA AACCTTTTTT TTTATCATCA TTATTAGCTT ACTTTCATAA TTGCGACTGG TTCCAATTGA CAAGCTTTTG ATTTTAACGA CTTTTAACGA CAACTTGAGA AGATCAAAAA ACAACTAATTATTCGAAACG AGGAATTCAC GTGGCCCAGC CGGCCGTCTC GGATCGGTAC CTCGAGCCGC GGCGGCCGCC AGCTT TCTA GAA CAA AAA CTC ATC TCA GAA GAG GAT CTG 811Glu Gln Lys Leu Ile Ser Glu Glu Asp Leu 5´ AOX1 priming sitemyc epitope3´ polyadenylation site Polyhistidine tag5´ end of AOX1 mRNA Sfu I Eco R I Pml I Sfi I Bsm B I Asp 718 I Kpn I Xho ISac II Not I Xba I 104010961156871931991Continued on next pageMultiple CloningSite of pPICZ C Below is the multiple cloning site for pPICZ C. Restriction sites are labeled to indicate the cleavage site. The boxed nucleotides indicate the variable region.The multiple cloning site has been confirmed by sequencing and functionaltesting.You can download the complete sequence of pPICZ C from our web site at or by contacting Technical Support (see page 32).For a map and a description of the features of pPICZ, refer to the Appendix(pages 21–22). AAT AGC GCC GTC GAC CAT CAT CAT CAT CAT CAT TGA GTTTGTAGCC TTAGACATGA CTGTTCCTCA GTTCAAGTTG GGCACTTACG AGAAGACCGG TCTTGCTAGA TTCTAATCAA GAGGATGTCA GAATGCCATT TGCCTGAGAG ATGCAGGCTT CATTTTTGAT ACTTTTTTAT TTGTAACCTA TATAGTATAG GATTTTTTTT GTCATTTTGT TTC 1217Asn Ser Ala Val Asp His His His His His His ***3´ AOX1 priming siteTGA GTTTGTAGCC TTAGACATGA AACCTTTTTT TTTATCATCA TTATTAGCTT ACTTTCATAA TTGCGACTGG TTCCAATTGA CAAGCTTTTG ATTTTAACGA CTTTTAACGA CAACTTGAGA AGATCAAAAA ACAACTAATT ATTCGAAACG AGGAATTCAC GTGGCCCAGC CGGCCGTCTC GGATCGGTAC CTCGAGCCGC GGCGGCCGCC AGCTT ACGTA GAA CAA AAA CTC ATC TCA GAA GAG GAT CTG 811Glu Gln Lys Leu Ile Ser Glu Glu Asp Leu 5´ AOX1 priming sitemyc epitope3´ polyadenylation site Polyhistidine tag5´ end of AOX1 mRNA Sfu I Eco R I Pml I Sfi I Bsm B I Asp 718 I Kpn I Xho I Sac II Not I Sna B I 104110971157871931991Continued on next pageE. coli Transformation Transform your ligation mixtures into a competent rec A, end A E. coli strain(e.g. TOP10, DH5, JM109) and select on Low Salt LB agar plates containing25 μg/ml Zeocin™ (see below). Note that there is no blue/white screening for the presence of insert with pPICZ A, B, or C. Once you have obtained Zeocin™-resistant colonies, pick 10 transformants and screen for the presence and orientation of your insert.Important To facilitate selection of Zeocin™-resistant E. coli, the salt concentration of the medium must remain low (<90 mM) and the pH must be 7.5. Prepare Low Salt LB broth and plates using the recipe in the Appendix, page 17.Failure to lower the salt content of your LB medium will result in non-selection due to inhibition of the drug.C We recommend that you sequence your construct to confirm that your gene is in the correct orientation for expression and cloned in frame with the C-terminal peptide (if desired). Refer to the diagrams on pages 5–7 for the sequences and location of the priming sites.Preparing a Glycerol Stock Once you have identified the correct clone, be sure to purify the colony and make a glycerol stock for long-term storage. It is also a good idea to keep a DNA stock of your plasmid at –20°C.1.Streak the original colony out on an Low Salt LB plate containing 25 μg/mlZeocin™. Incubate the plate at 37°C overnight.2.Isolate a single colony and inoculate into 1–2 ml of Low Salt LB containing25 μg/ml Zeocin™.3.Grow the culture to mid-log phase (OD600 = 0.5–0.7).4.Mix 0.85 ml of culture with 0.15 ml of sterile glycerol and transfer to acryovial.5.Store at –80°C.Plasmid Preparation Once you have cloned and sequenced your insert, generate enough plasmid DNA to transform Pichia (5–10 μg of each plasmid per transformation). We recommend isolating plasmid DNA using the PureLink™ Quick Plasmid Miniprep Kit or the PureLink™ HiPure Plasmid Midiprep Kit (page v), or CsCl gradient centrifugation.Once you have purified plasmid DNA, proceed to Pichia Transformation, next page.Pichia TransformationIntroduction You should now have your gene cloned into one of the pPICZ vectors. Yourconstruct should be correctly fused to the C-terminal peptide (if desired). Thissection provides general guidelines to prepare plasmid DNA, transform yourPichia strain, and select for Zeocin™-resistant clones.Zeocin™ Selection We generally use 100 μg/ml Zeocin™ to select for transformants when using the X-33 Pichia strain. If you are transforming your pPICZ construct into anotherPichia strain, note that selection conditions may vary. We recommendperforming a dose response curve to determine the appropriate concentration ofZeocin™ to use for selection of transformants in your strain.Method of Transformation We do not recommend spheroplasting for transformation of Pichia with plasmids containing the Zeocin™ resistance marker. Spheroplasting involves removal of the cell wall to allow DNA to enter the cell. Cells must first regenerate the cell wall before they are able to express the Zeocin™ resistance gene. For this reason, plating spheroplasts directly onto selective medium containing Zeocin™ does not yield any transformants.We recommend electroporation for transformation of Pichia with pPICZ A, B, or C. Electroporation yields 103 to 104 transformants per μg of linearized DNA and does not destroy the cell wall of Pichia. If you do not have access to an electroporation device, use the LiCl protocol on page 23 or the Pichia EasyComp™Transformation Kit available from Invitrogen (see below).PichiaEasyComp™Transformation Kit If you wish to perform chemical transformation of your Pichia strain with pPICZ A, B, or C, the Pichia EasyComp™ Transformation Kit is available from Invitrogen (see page v for ordering information). The Pichia EasyComp™ Transformation Kit provides reagents to prepare 6 preparations of competent cells. Each preparation will yield enough competent cells for 20 transformations. Competent cells may be used immediately or frozen and stored for future use. For more information, visit our web site at or contact Technical Support (page 32).Important Since pPICZ does not contain the HIS4 gene, integration can only occur at the AOX1 locus. Vector linearized within the 5´ AOX1 region will integrate by gene insertion into the host 5´ AOX1 region. Therefore, the Pichia host that you use will determine whether the recombinant strain is able to metabolize methanol (Mut+) or not (Mut S). To generate a Mut+ recombinant strain, you must use a Pichia host that contains the native AOX1 gene (e.g. X-33, GS115, SMD1168H). If you wish to generate a Mut S recombinant strain, then use a Pichia host that has a disrupted AOX1 gene (i.e. KM71H).Continued on next pageHis4 Host Strains Host strains containing the his4 allele (e.g. GS115) and transformed with thepPICZ vectors require histidine when grown in minimal media. Add histidine toa final concentration of 0.004% to ensure growth of your transformants.The pPICZ vectors do not contain a yeast origin of replication. Transformantscan only be isolated if recombination occurs between the plasmid and the Pichiagenome.Materials Needed You will need the following items:Note: Inclusion of sorbitol in YPD plates stabilizes electroporated cells as they appear tobe somewhat osmotically sensitive.•5–10 μg pure pPICZ containing your insert•YPD Medium•50 ml conical polypropylene tubes• 1 liter cold (4°C) sterile water (place on ice the day of the experiment)•25 ml cold (4°C) sterile 1 M sorbitol (place on ice the day of the experiment)•30°C incubator•Electroporation device and 0.2 cm cuvettes•YPDS plates containing the appropriate concentration of Zeocin™ (seepage 18 for recipe)Linearizing YourpPICZ ConstructTo promote integration, we recommend that you linearize your pPICZ constructwithin the 5′ AOX1 region. The table below lists unique sites that may be used tolinearize pPICZ prior to transformation. Other restriction sites are possible.Note that for the enzymes listed below, the cleavage site is the same for versionsA, B, and C of pPICZ. Be sure that your insert does not contain the restriction siteyou wish to use to linearize your vector.Enzyme Restriction Site (bp) SupplierSac I 209 ManyPme I 414 New England BiolabsBst X I 707 ManyRestriction Digest 1.Digest ~5–10 μg of plasmid DNA with one of the enzymes listed above.2.Check a small aliquot of your digest by agarose gel electrophoresis forcomplete linearization.3.If the vector is completely linearized, heat inactivate or add EDTA to stopthe reaction, phenol/chloroform extract once, and ethanol precipitate using1/10 volume 3 M sodium acetate and 2.5 volumes of 100% ethanol.4.Centrifuge the solution to pellet the DNA, wash the pellet with 80% ethanol,air-dry, and resuspend in 10 μl sterile, deionized water. Use immediately orstore at –20°C.Continued on next pagePreparation of Pichia for Electroporation Follow the procedure below to prepare your Pichia pastoris strain for electroporation.1. Grow 5 ml of your Pichia pastoris strain in YPD in a 50 ml conical tube at30°C overnight.2. Inoculate 500 ml of fresh medium in a 2 liter flask with 0.1–0.5 ml of theovernight culture. Grow overnight again to an OD600 = 1.3–1.5.3. Centrifuge the cells at 1500 × g for 5 minutes at 4°C. Resuspend the pelletwith 500 ml of ice-cold (0–4°C), sterile water.4. Centrifuge the cells as in Step 3, then resuspend the pellet with 250 ml ofice-cold (0–4°C), sterile water.5. Centrifuge the cells as in Step 3, then resuspend the pellet in 20 ml of ice-cold (0–4°C) 1 M sorbitol.6. Centrifuge the cells as in Step 3, then resuspend the pellet in 1 ml of ice-cold(0–4°C) 1 M sorbitol for a final volume of approximately 1.5 ml. Keep the cells on ice and use that day. Do not store cells.Transformation by Electroporation 1.Mix 80 μl of the cells from Step 6 (above) with 5–10 μg of linearized pPICZDNA (in 5–10 μl sterile water) and transfer them to an ice-cold (0–4°C)0.2 cm electroporation cuvette.2.Incubate the cuvette with the cells on ice for 5 minutes.3.Pulse the cells according to the parameters for yeast (Saccharomycescerevisiae) as suggested by the manufacturer of the specific electroporation device being used.4.Immediately add 1 ml of ice-cold 1 M sorbitol to the cuvette. Transfer thecuvette contents to a sterile 15 ml tube.5.Let the tube incubate at 30°C without shaking for 1 to 2 hours.6.Spread 50-200 μl each on separate, labeled YPDS plates containing theappropriate concentration of Zeocin™.7.Incubate plates for 2–3 days at 30°C until colonies form.8.Pick 10–20 colonies and purify (streak for single colonies) on fresh YPD orYPDS plates containing the appropriate concentration of Zeocin™.Continued on next pageGenerally, several hundred Zeocin™-resistant colonies are generated using theprotocol on the previous page. If more colonies are needed, the protocol may bemodified as described below. Note that you will need ~20, 150 mm plates withYPDS agar containing the appropriate concentration of Zeocin™.1. Set up two transformations per construct and follow Steps 1 through 5 ofthe Transformation by Electroporation protocol, page 11.2. After 1 hour in 1 M sorbitol at 30°C (Step 5, previous page), add 1 ml YPDmedium to each tube.3. Shake (~200 rpm) the cultures at 30°C.4. After 1 hour, take one of the tubes and plate out all of the cells by spreading200 μl on 150 mm plates containing the appropriate concentration ofZeocin™.5. Optional: Continue incubating the other culture for three more hours (for atotal of four hours) and then plate out all of the cells by spreading 200 μl on150 mm plates containing the appropriate concentration of Zeocin™.6. Incubate plates for 2–4 days at 30°C until colonies form.Mut Phenotype If you used a Pichia strain containing a native AOX1 gene (e.g. X-33, GS115,SMD1168H) as the host for your pPICZ construct, your Zeocin™-resistanttransformants will be Mut+. If you used a strain containing a deletion in theAOX1 gene (e.g. KM71H), your transformants will be Mut S.If you wish to verify the Mut phenotype of your Zeocin™-resistant transformants,you may refer to the general guidelines provided in the EasySelect™PichiaExpression Kit manual or the Original Pichia Expression Kit manual or topublished reference sources (Higgins & Cregg, 1998).You are now ready to test your transformants for expression of your gene ofinterest. See Expression in Pichia, next page.。

碧云天生物技术/Beyotime Biotechnology 订货热线：400-168-3301或800-8283301 订货e-mail ：******************技术咨询：*****************网址：碧云天网站 微信公众号聚甲基丙烯酸2-羟乙酯(BioPlus)产品编号 产品名称包装 ST1582-1g 聚甲基丙烯酸2-羟乙酯(BioPlus) 1g ST1582-5g 聚甲基丙烯酸2-羟乙酯(BioPlus) 5g ST1582-25g聚甲基丙烯酸2-羟乙酯(BioPlus)25g产品简介：CAS Number Chemical FormulaMolecular WeightPurity Grade 25249-16-5(C 6H 10O 3)n--BioPlus基本信息(General Information)：Name (Chinese) 聚甲基丙烯酸2-羟乙酯 Name (English) Poly(2-hydroxyethyl methacrylate) Specifications BioPlus, suitable for cell culture Chemical Formula (C 6H 10O 3)n Synonym (Chinese) 聚(2-HEMA), 聚-HEMA Synonym (English) Poly(2-HEMA); Poly-HEMA Beilstein Registry No. - EINECS Number - MDL Number MFCD00084374 UNSPSC Code 12352200 产品描述(Description)： Application 用于抑制细胞对培养容器中生长表面的粘附。

Physical form 遇水膨胀聚合物。

水凝胶。

性质(Properties)：density 1.15g/mL at 25°C(lit.) solubility ethanol: soluble120mg/mL form powdersuitabilitysuitable for cell culture安全信息(Safety Information)：Hazard Pictogram Codes- Signal Word - Hazard Statements - Precautionary Statements-Personal Protective Equipment Eyeshields, Gloves, type N95 (US), type P1 (EN143) respirator filter Hazard Codes (Europe) - Risk Codes (Europe) - Safety Codes (Europe)-RIDADR NONH for all modes of transport WGK Germany3 RTECS - Flash Point (F) - Flash Point (C)-包装清单:产品编号 产品名称包装 ST1582-1g聚甲基丙烯酸2-羟乙酯(BioPlus)1gST1582-5g 聚甲基丙烯酸2-羟乙酯(BioPlus) 5gST1582-25g 聚甲基丙烯酸2-羟乙酯(BioPlus) 25g－说明书1份保存条件：室温保存。

oset0europe15胆碱酯酶umollsec8426674101315252378胆碱酯酶umollsec985789118370296443creatinekinasecknacactivatedeuropeasia5肌酸激酶umollsec215172258704563845creatinekinaseckrosalkiothermodied5肌酸激酶umollsec212169254713570855creatinealkalinepicratekineticcartridgecrsumoll188150225510408612creatinealkalinepicratekineticmodularcre3creatineenzymaticcredigoxinimmunoturbidimetric地高辛nmoll107339271407gammaglutamyltransferaseggtszasz5谷氨酰转肽酶umollsec0927249gammaglutamyltransferaseggtszaszifcc20025谷氨酰转肽酶umollsec1070853128257206309glucoseglucoseoxidaseoxygenconsumptionglu3葡萄糖mmoll462148glucosehexokinase0glu葡萄糖mmoll493394591155ironferrozinenodeproteinizationumoll428118lactatelacticacidenzymatic乳酸umolllactatedehydrogenaseldhlactatepyruvate5乳酸脱氢酶umollsec234281281502401602lactatedehydrogenaseldhlactatepyruvateifcc20025乳酸脱氢酶umollsec291611489733lipasecolorimetriclip5脂肪酶umollsec0590154magnesiumcalmagitemmoll0830163phenobarbitalimmunoturbidimetric苯巴比妥umollphenytoinimmunoturbidimetricumoll423865phosphorusphosphomolybdateuvcartridgepo4mmoll115240p

50mg
询价
4、BMPA
改变巯基基团为羧基基团，用于制备肽段-蛋白质交联物。
产品特点：
•反应基团：马来酰亚胺和羧基
•反应指向：巯基基团和胺（当与EDC结合使用时）
参考文献
Hermanson, G.T. (2008). Bioconjugate Techniques, 2nd ed., Elsevier Inc., pp.111-113. (Product # 20036)
25g
473
相关产品：
产品货号
产品名称
价格￥
24510
Sulfo-NHS
1848
22980
EDC
1005
20320
DCC
488
14、STAT，SATP和巯基添加试剂盒
添加保护性巯基防止二肽形成。
产品特点：
•与伯胺反应添加保护性巯基
•简单的脱保护步骤即可产生游离的巯基
•Thermo Scientific巯基添加试剂盒包含硫醇化作用，脱保护，纯化和定量所有需要的组分
订购信息：
产品货号
产品名称
包装
价格￥
23031
二盐酸乙二胺
10g
399
8、碘乙酰胺（Iodoacetamide），一次性使用
质谱前可靠的烷基化试剂。产品ຫໍສະໝຸດ 点：•与巯基基团形成共价键
•质谱级别（高纯度）
•方便，一次性使用形式（3个微型管，每管含有9.4mg）
•当用132μl碳酸氢铵（ammonium bicarbonate）溶解时，每管产生375mM的溶液
500mg
620
10、MMTS
可与巯基反应的可逆试剂。
产品特点：
•将-SH基团转化为-S-S-CH3

美索巴莫注射液标准美索巴莫注射液是一种中枢性肌肉松弛剂，主要用于治疗急性骨骼肌疼痛或不适症状。

以下是关于美索巴莫注射液的一些标准信息：1. 中文通用名：美索巴莫注射液2. 英文通用名：Methocarbamol Injection3. 标准号：ws-10001-(hd-0269)-20024. 药品名称：美索巴莫注射液5. 药品英文名：Methocarbamol Injection6. 主要成分：本品为美索巴莫的灭菌聚乙二醇，400水溶液。

含美索巴莫（c11h15no5）应为标示量的95.0%~105.%。

7. 处方：具体处方应根据医生建议和患者病情来确定。

8. 性状：本品为无色或几乎无色略带黏稠的澄明液体。

9. 鉴别：通过化学分析和物理测试等方法来鉴别美索巴莫注射液的真伪和质量。

10. 作用类别：中枢性肌肉松弛剂11. 药理毒理：本品对中枢神经系统有选择作用，特别对脊椎中神经元作用明显。

抑制与骨骼肌痉挛有关的神经突触反射，有抗士的宁和电刺激所致惊厥的作用，并有解痉、镇痛和抗炎作用。

其作用机制主要是阻断脊髓内中枢神经元从而使骨骼肌松弛。

12. 药代动力学：美索巴莫注射液在体内的吸收、分布、代谢和排泄过程。

13. 适应症：主要用于急性骨骼肌疼痛或不适症状的辅助治疗。

14. 用法用量：美索巴莫注射液的用法主要是采用静脉滴注或者是静脉推注的方式给药。

如果是用于静脉推注时，患者在静卧的条件下缓慢推注，给药的速度每分钟不可以超过3ml，注射之后应该至少休息10~15分钟。

如果是用于静脉滴注时，将药品配在9%的氯化钠注射液或者是5%的葡萄糖注射液当中，滴注的速度不宜过快。

使用剂量和次数根据病情和治疗效果来决定。

成人一次使用剂量为1.0g，一日最大剂量为3.0g，连续使用不得超过3天。

轻度病例静注后应改为口服给药以维持治疗。

15. 不良反应：使用美索巴莫注射液可能出现的不良反应，如头痛、恶心、呕吐、皮疹等。

16. 禁忌症：对美索巴莫过敏者、肝肾功能不全者、哺乳期妇女禁用。

合成方法
合成方法
化合物(I)和碘甲烷在乙醇中回流8h，环合得到化合物(Ⅱ)。再水解脱去酯基，得到化合物(Ⅲ)。用对甲氧 基苯乙基溴进行N-烷基化，得化合物(Ⅳ)。再用对氟苄基溴烷基化，得阿司咪唑。
1. 1-[(4-氟苯基)甲基]-苯并咪唑-2-(3H)-酮的制备
在反应瓶中加入2-羟基苯并咪唑5.0g(37.3mmol)和NaH 1.6g(53mmol)(NaH含量大约为80%,浸入矿物油中) 的DMF 100ml的悬浮液.加毕.在60ºC.(最好有N2保护)搅拌反应1h.再加入4-氟苄基氯(FBC)5.4g(37mmol),加热 ( 6 0 ºC ) 搅 拌 反 应 5 . 5 h . 冷 却 至 室 温 后 加 入 冰 水 7 0 0 m l , 用 二 氯 甲 烷 ( 5 0 0 m l × 2 ) 提 取 . 有 机 层 用 食 盐 水 洗 . 无 水 N a 2 S O 4 干燥.过滤.滤液减压浓缩.剩余物用石油醚析晶.得1-[(4-氟苯基)甲基]-苯并咪唑-2-(3H)-酮固体8.0g,为无色 结 晶 m p 1 7 8 ~ 1 7 9 ºC , 收 率 8 8 % .
治疗措施
阿司咪唑中毒的治疗要点为： 1.大量摄入者予洗胃，后灌服活性炭和导泻。 2.对心肌抑制和Q-T间期延长者予5%碳酸氢钠250ml静注可能有效。 3.对症、支持治疗。
专家点评
专家点评
阿司咪阿司咪唑自1983年上市以来，在许多国家得到了广泛应用。国外研究显示阿司咪唑治疗荨麻疹的总有 效率为74%。国内的一项多中心双盲安慰剂对照试验表明阿司咪唑对急性荨麻疹的总有效率为82.9%，对慢性荨麻 疹的总有效率为86.0%，均显著高于安慰剂，主要不良反应为嗜睡、倦怠、口干等，连续用药3个月的患者中，半 数有食欲及体重增加。阿司咪唑的心脏毒性虽然发生率较低，但由于后果严重，已限制了它的应用。阿司咪唑为 强效和长效的H1受体拮抗剂，无中枢镇静和抗毒蕈碱样作用。代谢产物去甲阿司咪唑仍有抗胆胺作用。长期服用 可增进食欲和增加体重，服用过量可引起心脏Q-T间期延长和室性心律失常。适用于各种原因引起过敏性疾病。

15
Real-Time PCR
16
Mx3000P QPCR System
17
Brilliant III Ultra-Fast SYBR Green QPCR and QRT-PCR Reagents
18
Brilliant III Ultra-Fast QPCR and QRT-PCR Reagents
Agilent / STRATAGENE
Agilent website: /genomics
Welgene | Agilent Stratagene
威健股份有限公司 | Stratagene 總代理
Table of Content
Table of Contents
/ XL1-Red Competent Cells SoloPack Gold Supercompetent Cells
/ TK Competent Cells Specialty Cells
/ Classic Cells / Fine Chemicals For Competent Cells
適用於 UNG 去汙染或 bisulphite
sequencing
適用於 TA Cloning
最高敏感性
取代傳統 Taq 的好選擇
-
2
威健股份有限公司 | Stratagene 總代理
PCR Enzyme & Instrument
Agilent SureCycler 8800
市場上領先的 cycling 速度和 sample 體積 10 ～ 100 μL 簡易快速可以選擇 96 well 和 384 well 操作盤 優秀的溫控設備讓各個 well 都能保持溫度的穩定 七吋的高解析度觸控螢幕讓操作上更為簡便 可以透過網路遠端操控儀器及監控儀器 Agilent 專業的技術支援可以幫助您應對各種 PCR 的問題

2-甲基丙烯酸羟乙酯密度
2-甲基丙烯酸羟乙酯（简称Methacrylic Acid Hydroxyethyl Ester，缩写为HEMA）是一种无色透明的液体。

它的密度通常在
1.05克/毫升到1.11克/毫升之间，具体数值取决于温度和压力。

在常温下（约20摄氏度），它的密度大约为1.07克/毫升。

需要注意的是，密度值可能会因不同的生产商或供应商而略有不同。

密度的测量对于工业生产和实验室研究中的配方和计量非常重要，因为它直接影响着该化合物在各种应用中的使用量和性能。

密度的准确测量有助于确保产品质量和生产过程的稳定性。

生物技术进展 2023 年 第 13 卷 第 4 期 596 ~ 603Current Biotechnology ISSN 2095‑2341研究论文Articles重组贻贝粘蛋白的表征及功效评价李敏 ， 魏文培 ， 乔莎 ， 郝东 ， 周浩 ， 赵硕文 ， 张立峰 ， 侯增淼 *西安德诺海思医疗科技有限公司，西安 710000摘要：为了推进重组贻贝粘蛋白在医疗、化妆品领域的应用，对大肠杆菌规模化发酵及纯化生产获得的重组贻贝粘蛋白进行了表征及功效评价。

经Edman 降解法、基质辅助激光解吸电离飞行时间质谱、PITC 法、非还原型SDS -聚丙烯酰胺凝胶电泳法、凝胶法、改良的Arnow 法对重组贻贝粘蛋白进行氨基酸N 端测序、相对分子量分析、氨基酸组成分析、蛋白纯度分析、内毒素含量测定、多巴含量测定；通过细胞迁移、斑马鱼尾鳍修复效果对重组贻贝粘蛋白进行功效评价。

结果显示，获得的重组贻贝粘蛋白与理论的一级结构一致，蛋白纯度达95%以上，内毒素<10 EU ·mg -1,多巴含量大于5%；重组贻贝粘蛋白浓度为60 μg ·mL -1时能够显著促进细胞增殖的活性（P <0.01）；斑马鱼尾鳍面积样品组与模型对照组相比极显著增加（P <0.001）。

研究结果表明，重组贻贝粘蛋白具有显著的促细胞迁移和修复愈合的功效，具备作为生物医学材料的潜质。

关键词：贻贝粘蛋白；基因重组；生物材料；表征；功效评价DOI ：10.19586/j.2095­2341.2023.0021 中图分类号：S985.3+1 文献标志码：ACharacterization and Efficacy Evaluation of Recombinant Mussel Adhesive ProteinLI Min ， WEI Wenpei ， QIAO Sha ， HAO Dong ， ZHOU Hao ， ZHAO Shuowen ， ZHANG Lifeng ，HOU Zengmiao *Xi'an DeNovo Hith Medical Technology Co.， Ltd ， Xi'an 710000， ChinaAbstract ：In order to promote the application of recombinant mussel adhesive protein in the medical and cosmetics field ， the recombi⁃nant mussel adhesive protein obtained from scale fermentation and purification of Escherichia coli was characterized and its efficacy was evaluated. Amino acid N -terminal sequencing ， relative molecular weight analysis ， amino acid composition analysis ， protein purityanalysis ， endotoxin content ， dihydroxyphenylalanine （DOPA ） content of recombinant mussel adhesive protein were determined by the following methods ： Edman degradation ， matrix -assisted laser desorption ionization time -of -flight mass spectrometry （MALDI -TOF -MS ）， phenyl -isothiocyanate （PITC ）， nonreductive SDS -polyacrylamide gel electrophoresis （SDS -PAGE ）， gel method ， modified Ar⁃now. The efficacy of recombinant mussel adhesive protein was evaluated by cell migration and repairing effect of zebrafish tail fin. Re⁃sults showed that the obtained recombinant mussel adhesive protein was confirmed to be consistent with the theoretical primary structure ， protein purity of more than 95%， endotoxin <10 EU ·mg -1， DOPA content above 5%. When the recombinant mussel adhesive protein concentration was 60 μg ·mL -1， the effect of promoting cell proliferation was the most obvious ， and it had very significant activity （P <0.01）. The caudal fin area of zebrafish in sample group was significantly increased compared with model control group （P <0.001）. The results indicated that recombinant mussel adhesive protein can promote cell migration and repair healing and has the potential to be used as biomedical materials.Key words ：mussel adhesive protein ； gene recombination ； biological materials ； representation ； efficacy evaluation贻贝粘蛋白（mussel adhesive protein ， MAP ）也称作贻贝足丝蛋白（mussel foot protein ，Mfps ），收稿日期：2023⁃02⁃24； 接受日期：2023⁃03⁃31联系方式：李敏 E -mail:*******************;*通信作者 侯增淼 E -mail:***********************.cn李敏，等：重组贻贝粘蛋白的表征及功效评价是海洋贝类——紫贻贝（Mytilus galloprovincalis）、厚壳贻贝（Mytilus coruscus）、翡翠贻贝（Perna viri⁃dis）等分泌的一种特殊的蛋白质，贻贝中含有多种贻贝粘蛋白，包括贻贝粘蛋白（Mfp 1～6）、前胶原蛋白（precollagens）和基质蛋白（matrix proteins）等［1］。

乙醚胺MSDS1. 化学品和公司信息- 化学品名称: 乙醚胺- 化学式: C4H11N- 分子量: 73.14 g/mol- 公司名称: XY化学有限公司- 公司地址: 123号街道，城市，国家2. 危险性信息- 主要危险性: 易燃液体- 严重危险: 高度易燃，可能造成火灾和爆炸- 危险警示词: 高度易燃- 安全措施:- 保持远离火源和高温热源- 避免静电放电- 使用防爆设备和喷雾装置- 危险性评估:- 急性毒性: 低毒- 致癌性: 未知3. 紧急处理措施- 灭火方法: 使用干粉灭火器等适合的灭火介质- 泄漏事故应急处理:- 隔离泄漏区域- 避免直接接触，穿着防护服- 使用吸附剂进行吸附清理4. 个人防护措施- 呼吸防护: 如有气味，使用防毒面具- 眼睛防护: 戴安全护目镜或防护面罩- 皮肤防护: 穿戴防护服，戴防化手套- 其他: 身体防护和个人卫生5. 应急控制措施- 不要吸入蒸气，避免眼睛接触- 不要排放到环境中，避免造成污染6. 泄漏处置- 隔离泄漏区域- 切勿用水冲洗或吸入蒸气- 使用防静电设备清除，避免静电火花7. 操作处置- 操作注意事项:- 操作时避免产生静电- 远离火源，禁止吸烟和使用明火- 使用通风设施- 储存条件: 存放于阴凉、干燥、通风良好的场所- 包装要求: 密封存放- 处理和清洁: 使用合适的设备和方法处理和清洁8. 物理性质- 外观: 无色液体- 气味: 特殊气味- 熔点: -70°C- 沸点: 37°C- 相对密度: 0.733 g/mL- 溶解性: 在水中可以溶解9. 稳定性和反应活性- 稳定性: 稳定- 反应活性: 避免与强氧化剂和酸反应10. 生态毒性和环境影响- 对水生生物有毒性11. 毒理学信息- 急性毒性: 对人体具有低毒性- 吸入: 可引起头晕、嗜睡- 眼睛接触: 有刺激性- 皮肤接触: 可导致皮肤干燥和裂开12. 废弃处置- 按照当地法规进行处置13. 运输信息- UN编号: UN1151- 包装类别: III- 运输标记: 可燃液体这份文档提供了乙醚胺的主要化学和安全信息，以及在使用、储存、泄漏处置和运输方面的指导措施。

二异丙基乙胺相对原子质量引言二异丙基乙胺是一种有机化合物，对于了解其相对原子质量非常重要。

本文将从多个角度详细探讨二异丙基乙胺的相对原子质量，并解释其重要性。

二异丙基乙胺的定义二异丙基乙胺，化学式为C6H15N，是一种含有两个异丙基基团的乙醇胺。

它是一种无色液体，具有氨的气味。

二异丙基乙胺常用作有机合成中的试剂，并广泛应用于医药、冶金和农药等领域。

相对原子质量的概念相对原子质量是指一个元素原子相对于碳-12同位素的质量。

根据国际纯粹与应用化学联合会（IUPAC）的标准，相对原子质量是以碳-12同位素的原子质量为准进行计量的，其数值为12。

二异丙基乙胺的化学组成二异丙基乙胺的化学组成是由碳、氢和氮元素组成的。

根据化学式C6H15N，我们可以通过查找各个元素的相对原子质量，计算出二异丙基乙胺的相对原子质量。

•碳的相对原子质量是12.01•氢的相对原子质量是1.01•氮的相对原子质量是14.01根据这些数值，我们可以计算出二异丙基乙胺的相对原子质量。

相对原子质量 = 6 * 碳的相对原子质量 + 15 * 氢的相对原子质量 + 氮的相对原子质量代入数值得到：相对原子质量 = 6 * 12.01 + 15 * 1.01 + 14.01 = 101.2二异丙基乙胺相对原子质量的重要性二异丙基乙胺的相对原子质量对于许多化学和物理性质的计算和研究非常重要。

以下是其重要性的几个方面：1. 反应计量在化学反应中，可以利用相对原子质量计算反应物和生成物之间的摩尔比例。

这对于确定反应的限定因素和理解反应机理非常关键。

2. 燃烧热二异丙基乙胺的相对原子质量也对计算燃烧热非常重要。

燃烧热是在恒定压力下物质完全燃烧产生的热能。

通过计算二异丙基乙胺中碳、氢和氮元素的相对原子质量，可以预测其燃烧过程中产生的热量。

3. 反应速率二异丙基乙胺的相对原子质量对于预测其参与的化学反应速率非常重要。

相对原子质量越大，分子质量越大，反应速率也相对较慢。

常用有机溶剂共沸点乙醚的性质1. 乙醚为无色、透明、易流动的液体，挥发性极大，它的蒸气有芳香味，但有麻醉性。

沸点34.6℃、凝固点－116℃，所以能耐剧冷而不凝冻。

比重很轻，在15℃时为0.720。

微溶于水，能溶于乙醇、苯、氯仿等有机溶剂中。

常用有机溶剂共沸点溶剂沸点/℃共沸点/℃含水量/%氯仿61.2 56.1 2.5甲苯110.5 85.0 20四氯化碳77.0 66.0 4.0正丙醇97.2 87.7 28.8苯80.4 69.2 8.8异丁醇108.4 89.9 88.2丙稀腈78.0 70.0 13.0 二甲苯137-40.5 92.0 37.5 二氯乙烷83.7 72.0 19.5 正丁醇117.7 92.2 37.5乙睛82.0 76.0 16.0吡啶115.5 94.0 42乙醇78.3 78.1 4.4异戊醇131.0 95.1 49.6乙酸乙酯77.1 70.4 8.0正戊醇138.3 95.4 44.7异丙醇82.4 80.4 12.1氯乙醇129.0 97.8 59.0乙醚35 34 1.0二硫化碳46 44 2.0甲酸101 107 26溶剂mp bp D420 nD20Acetic acid 乙酸17 118 1.049 1.3716 6.15 12.9 1.68Acetone 丙酮-95 56 0.788 1.3587 20.7 16.2 2.85Acetonitrile 乙腈-44 82 0.782 1.3441 37.5 11.1 3.45Anisole 苯甲醚-3 154 0.994 1.5170 4.33 33 1.38Benzene 苯 5 80 0.879 1.5011 2.27 26.2 0.00 Bromobenzene 溴苯 -31 156 1.495 1.5580 5.17 33.7 1.55Carbon disulfide 二硫化碳-112 46 1.274 1.6295 2.6 21.3 0.00Carbon tetrachloride 四氯化碳 -23 77 1.594 1.4601 2.24 25.8 0.00 Chlorobenzene 氯苯-46 132 1.106 1.5248 5.62 31.2 1.54 Chloroform 氯仿-64 61 1.489 1.4458 4.81 21 1.15 Cyclohexane 环己烷6 81 0.778 1.4262 2.02 27.7 0.00 Dibutyl ether 丁醚-98 142 0.769 1.3992 3.1 40.8 1.18 o –Dichlorobenzene 邻二氯苯-17 181 1.306 1.5514 9.93 35.9 2.27 1,2-Dichloroethane 1，2-二氯乙烷-36 84 1.253 1.4448 10.36 21 1.86 Dichloromethane 二氯乙烷-95 40 1.326 1.4241 8.93 16 1.55 Diethylamine 二乙胺-50 56 0.707 1.3864 3.6 24.3 0.92 Diethyl ether 乙醚-117 35 0.713 1.3524 4.33 22.1 1.30 1,2-Dimethoxyethane 1，2-二甲氧基乙烷 -68 85 0.863 1.3796 7.2 24.1 1.71 N,N –Dimethylacetamide N，N-二甲基乙酰胺 -20 166 0.937 1.4384 37.8 24.2 3.72 N,N –DimethylformamideN，N-二甲基甲酰胺-60 152 0.945 1.4305 36.7 19.9 3.86 Dimethyl sulfoxide二甲基亚砜19 189 1.096 1.4783 46.7 20.1 3.90 1,4-Dioxane 1，4-二氧六环12 101 1.034 1.4224 2.25 21.6 0.45 Ethanol 乙醇-114 78 0.789 1.3614 24.5 12.8 1.69 Ethyl acetate 乙酸乙酯-84 77 0.901 1.3724 6.02 22.3 1.88 Ethyl benzoate 苯甲酸乙酯-35 213 1.050 1.5052 6.02 42.5 2.00 Formamide 甲酰胺3 211 1.133 1.4475 111.0 10.6 3.37 Hexamethylphosphoramide7 235 1.027 1.4588 30.0 47.7 5.54 Isopropyl alcohol 异丙醇-90 82 0.786 1.3772 17.9 17.5 1.66 isopropyl ether 异丙醚-60 68 1.36 Methanol 甲醇-98 65 0.791 1.3284 32.7 8.2 1.70 2-Methyl-2-propanol 2-甲基-2-丙醇 26 82 0.786 1.3877 10.9 22.2 1.66 Nitrobenzene 硝基苯6 211 1.204 1.5562 34.82 32.7 4.02 Nitromethane 硝基甲烷 -28 101 1.137 1.3817 35.87 12.5 3.54 Pyridine 吡啶-42 115 0.983 1.5102 12.4 24.1 2.37 tert-butyl alcohol 叔丁醇25.5 82.5 1.3878 Tetrahydrofuran 四氢呋喃-109 66 0.888 1.4072 7.58 19.9 1.75 Toluene 甲苯-95 111 0.867 1.4969 2.38 31.1 0.43 Trichloroethylene 三氯乙烯-86 87 1.465 1.4767 3.4 25.5 0.81 Triethylamine 三乙胺-115 90 0.726 1.4010 2.42 33.1 0.87 Trifluoroacetic acid 三氟乙酸-15 72 1.489 1.2850 8.55 13.7 2.26 2,2,2-Trifluoroethanol 2，2，2-三氟乙醇 -44 77 1.384 1.2910 8.55 12.4 2.52 Water 水0 100 0.998 1.3330 80.1 3.7 1.82 o -Xylene 邻二甲苯-25 144 0.880 1.5054 2.57 35.8 0.62Common Organic Solvents: Table of Properties 1,2,3acetic acidC 2H 4O 2 60.05 11816.6 1.049 Miscible6.1539acetone C 3H 6O 58.08 56.2 -94.3 0.786 Miscible 20.7(25) -18 acetonitrile C 2H 3N 41.05 81.6 -46 0.786 Miscible 37.5 61-butanol C4H10O 74.12 117.6 -89.5 0.81 6.3 17.8 352-butanol C 4H10O 74.12 98 -115 0.808 15 15.8(25) 262-butanone C4H8O 72.11 79.6 -86.3 0.805 25.6 18.5 -7t-butyl alcohol C4H10O 74.12 82.2 25.5 0.786 Miscible 12.5 11 carbon tetrachloride CCl4153.82 76.7 -22.4 1.594 0.08 2.24 --chlorobenzene C6H5Cl 112.56 131.7 -45.6 1.1066 0.05 2.71 29 chloroform CHCl3119.38 61.7 -63.7 1.498 0.795 4.81 --cyclohexane C6H1284.16 80.7 6.6 0.779 <0.1 2.02 -201,2-dichloroethane C2H4 Cl298.96 83.5 -35.3 1.245 0.861 10.42 13 diethyl ether C4H10O 74.12 34.6 -116.3 0.713 7.5 4.34 -45 diethylene glycol C4H10O3106.12 245 -10 1.118 10 31.7 143diglyme (diethyleneglycoldimethyl ether) C6H14O3134.17 162 -68 0.943 Miscible 7.23 67 1,2-dimethoxy- ethane (glyme, DME) C4H10O2 90.12 85 -58 0.868 Miscible 7.2 -6dimethylether C2H6O 46.07 -22 -138.5 NA NA NA -41dimethyl- formamide (DMF) C3H7NO 73.09 153 -61 0.944 Miscible 36.7 58 dimethyl sulfoxide (DMSO) C2H6OS 78.13 189 18.4 1.092 25.3 47 95dioxane C4H8O288.11 101.1 11.8 1.033 Miscible 2.21(25) 12 ethanol C2H6O 46.07 78.5 -114.1 0.789 Miscible 24.6 13 ethyl acetate C4H8O 288.11 77 -83.6 0.895 8.7 6(25) -4ethylene glycol C2H6O262.07 195 -13 1.115 Miscible 37.7 111 glycerin C3H8O392.09 290 17.8 1.261 Miscible 42.5 160heptane C7H16100.20 98 -90.6 0.684 0.01 1.92 -4Hexamethylphosphoramide (HMPA) C6H18N3OP 179.20 232.5 7.2 1.03 Miscible 31.3 105 Hexamethylphosphorous C6H18 N3P 163.20 150 -44 0.898 Miscible ?? 26triamide (HMPT) hexane C 6H 14 86.18 69 -95 0.659 0.014 1.89 -22methanol CH 4O 32.04 64.6 -980.791 Miscible 32.6(25) 12methyl t-butyl ether (MTBE) C 5H 12O 88.15 55.2-109 0.7415.1 ?? -28 methylene chlorideCH 2Cl 2 84.93 39.8 -96.7 1.326 1.32 9.08 1.6 N -methyl-2-pyrrolidinone (NMP) CH 5H 9NO 99.13 202 -24 1.033 10 32 91 nitromethane CH 3NO 2 61.04 101.2 -291.3829.50 35.9 35 pentane C 5H 12 72.15 36.1 -129.7 0.626 0.04 1.84 -49 Petroleum ether(ligroine) ----30-60 -400.656-----301-propanol C 3H 8O 88.15 97-126 0.803 Miscible 20.1(25) 152-propanol C 3H 8O 88.15 82.4 -88.5 0.785 Miscible 18.3(25) 12 pyridineC 5H 5N 79.10 115.2 -41.6 0.982 Miscible 12.3(25) 17 tetrahydrofuran (THF) C 4H 8O 72.11 66-108.4 0.886 30 7.6 -21 toluene C 7H 892.14 110.6 -930.8670.05 2.38(25) 4 triethyl amine C 6H 15N 101.19 88.9 -114.7 0.728 0.02 2.4 -11 water H 2O 18.02 100.00 0.00 0.998 --78.54 -- water, heavyD 2O20.03 101.341.107 Miscible?? -- o -xylene C 8H 10 106.17 144 -25.2 0.897 Insoluble2.57 32 m -xylene C 8H 10 106.17 139.1 -47.8 0.868 Insoluble 2.37 27 p -xyleneC 8H 10 106.17 138.4 13.3 0.861 Insoluble2.2727。

1,4-丁基磺酸内酯，
1,3-丙烷磺酸内酯 (1,3-PS)
1,3-Propane sultone；
精品资料
______________________________________________________________________________________________________________
______________________________________________________________________________________________________________
化学名称
别名 英文名称 CAS 号
分子式
锂离子电池电解液添加剂物性数据
环己基苯(CHB)
CAS 号 分子式
4427-96-7 C5H6O3
分子结构
分子量 熔点/沸点/闪点
114.10
？/237℃/733mmHg/96.6
密度（g/mL at 25℃） 粘度（40℃） 折光率 外观 特性
1.188
1.45 无色液体
见附注
1073-05-8 C3H6O4S
1-Phenyl-2-acetone
2、添加了 MMDS 的电池具有很好的高温循 环性能。适用于动力电池，特别是锰酸锂做 正极材料的动力电池，MMDS 能防止高温下 熔出的 Mn 吸附在负极表面，抑制了阻抗上 升，有效提高了循环周期特性，可以大大增 加其循环寿命。
变色。还可用作底涂剂。
包装材料为 PE
精品资料
______________________________________________________________________________________________________________

北京曼思特益母草苷结构式
益母草苷：
分子式：C15H24O9
分子量：348.35
储存条件：-20℃，有效期2年，溶入溶剂后-20℃请尽量在一个月内使用
益母草苷是一种化学物质。

纯度98%以上，检测方法HPLC，用于医药研究及含量测定。

益母草苷是一种环烯醚萜苷类化合物，主要来源于地黄、益母草等。

益母草苷具有抗癌、神经保护、抗炎、利尿等功效。

一种预防原发性高血压的药物组合物，包含下列原料按照重量份数配制而成：无羁萜-3β-醇1～100份、黄芪多糖组分a310～100份、连翘苷3～100份，白藜芦醇10～100份和益母草苷a7～100份。

研究发现，无羁萜-3β-醇、黄芪多糖组分a3、连翘苷，白藜芦醇和益母草苷a 组成的复方可以有效降低高血压模型大鼠的收缩压和舒张压，降低血浆血管紧张素ii(angii)水平，升高血浆血管舒张因子一氧化氮(no)水平，增加血管组织一氧化氮合酶(enos)蛋白表达以及基因表达。

益母草苷或其前药的用途，尤其是益母草苷或其前药用于制备降血压的药物的用途。

·药物研发·高效液相色谱-串联质谱法检测泮托拉唑钠原料药中的水合肼赵会明 张振洋 樊华军［英格尔检测技术服务（上海）有限公司 上海 201100］摘要建立了泮托拉唑钠原料药中的基因毒性杂质水合肼的高效液相色谱-串联质谱（LC-MSMS）检测方法。

采用反相色谱，以水-乙腈（含0.1%甲酸）为流动相，梯度洗脱，流速0.5 mL/min，以ESI正离子多反应监测（MRM）模式进行质谱检测。

结果显示，水合肼的检测限和定量限可达到0.23、0.47 ng/mL，其在0.47~9.37 ng/mL浓度范围内线性关系良好（r=0.999 9），准确度试验中低、中、高浓度回收率均在81.6%~90.9%之间。

在3批次泮托拉唑钠原料药中均未检出水合肼。

关键词高效液相色谱-串联质谱法基因毒性杂质泮托拉唑钠水合肼痕量检测中图分类号：R917; O657 文献标志码：A 文章编号：1006-1533(2022)11-0072-04引用本文 赵会明, 张振洋, 樊华军. 高效液相色谱-串联质谱法检测泮托拉唑钠原料药中的水合肼[J]. 上海医药, 2022, 43(11): 72-75.Determination of hydrazine hydrate in pantoprazole sodium by high performance liquid chromatography-tandem mass spectrometryZHAO Huiming, ZHANG Zhenyang, FAN Huajun[ICAS Testing Technology Service (Shanghai) CO., LTD., Shanghai 201100, China]ABSTRACT To establish a high-performance liquid chromatography-tandem mass spectrometry (LC-MSMS) method for the determination of hydrazine hydrate in active pharmaceutical ingredient (API) pantoprazole sodium. HPLC was carried out by reverse chromatography using water-acetonitrile containing 0.1% formic acid as flow phase and gradient elution at a flow rate of 0.5 mL/min. Mass spectrometry was performed with multi-reaction monitoring (MRM) in positive ESI mode. The detection and quantitative limits of hydrazine hydrate reached 0.23, 0.47 ng/mL and hydrazine hydrate showed good linear relationship in the range of 0.47-9.37 ng/mL (r=0.999 9). The recoveries of samples at low, medium and high-level concentrations reached81.6% to 90.9% in the accuracy experiment. No hydrazine hydrate was detected in 3 batches of pantoprazole sodium.KEY WORDS HPLC-tandem mass spectrometry; genotoxic impurities; pantoprazole sodium; hydrazine hydrate; trace determination上消化道出血是近年的临床疾病中常见且多发的一种疾病，其临床表现为呕血、黑便等，如得不到及时有效治疗，可能引发失血性休克。

填表部门：
审核部门：
常见用途：
暂无
分子结构数据：
1、摩尔折射率：102.91
2、摩尔体积（cm3/mol）：378.6
3、等张比容（90.2K）：899.2
4、表面张力（dyne/cm）：31.8
5、极化率（10-24cm3）：40.79
计算化学数据：
1.疏水参数计算参考值（XlogP）:7.42.氢键供体数量:03.氢键受体数量:34.可旋转化学键数量:195.互变异构体数量:无6.拓扑分子极性表面积35.57.重原子数量:248.表面电荷:09.复杂度:28710.同位素原子数量:011.确定原子立构中心数量:012.不确定原子立构中心数量:013.确定化学键立构中心数量:114.不确定化学键立构中心数量:015.共价键单元数量:1
第十五部分
法规信息
第八部分
接触控制和个体防护
第十六部分
其他信息
第一部分：化学品及企业标识
中文名称：
油酸甲氧基乙酯
中文别名：
十八烯酸甲氧基乙酯
英文名称：
Methoxyethyl oleate
英文别名：
Oleic acid，2-methoxyethyl ester
CAS号：
111-10-4
技术说明书编码：
身体防护：
穿工作服。
手防护：
必要时戴防护手套。
其他防护：
无资料
第九部分：理化特性
pH：
无资料
熔点(℃)：
-20
沸点(℃)：
360
分子式：
C21H40O3
主要成分：
无资料
临界温度(℃)：
无资料
辛醇/水分配系数的对数值：
无资料