胡贵生采矿毕业设计
- 格式:doc
- 大小:3.55 MB
- 文档页数:94
江西理工大学本科毕业设计(论文)题目:江铜武山铜矿开采设计(采矿方法专题)学院:资源与环境工程学院专业班级:采矿工程2004级(1)姓名:樊忠华指导教师:肖广哲赵奎完成时间:2008年05月28日目录第一章总论 (1)1.1矿山概况 (1)1.2设计依据 (1)1.3设计指导思想与原则 (2)1.4矿山建设主要方案 (2)1.5存在的问题与建议 (4)第二章矿山地质 (5)2.1矿区地理与气候条件 (5)2.2矿区地质构造 (6)2.3矿脉分布、产状及规模 (8)2.4矿区水文地质 (8)2.5矿区工程地质 (9)第三章矿山年产量及服务年限 (10)3.1矿山年产量 (10)3.2矿山服务年限的计算 (10)3.3矿山工作制度 (11)第四章矿床开采技术条件 (12)4.1矿体及其顶、底板岩石的稳固性 (12)4.2矿石和围岩的物理力学性质 (12)4.3有害的物质成份分析 (13)4.4矿床开采工业指标 (13)第五章矿床开拓 (14)5.1井田划分 (14)5.2岩体移动范围 (14)5.3阶段高度的确定 (14)5.4矿床开拓方法选择 (15)5.5阶段及矿块开采顺序 (19)5.6三级储量 (19)第六章矿山井巷工程 (21)6.1矿山基本井巷工程 (21)6.2井筒及阶段运输巷道断面设计 (21)6.3井底车场形式与马头门尺寸的确定 (28)6.4井筒及阶段运输平巷位置布置 (30)6.5井筒及阶段运输平巷施工要求 (31)第七章采矿方法(专题部分) (32)7.1矿床地质及开采地质条件 (32)7.2采矿方法选择 (33)7.3采矿方法设计 (37)第八章矿井运输与提升 (42)8.1运输任务、方式及线路 (42)8.2运输设备选型 (42)8.3轨道结构与选型 (49)8.4列车编组计算 (49)第九章矿井通风 (54)9.1矿井通风概述 (54)9.2矿井通风条件 (54)9.3风量计算 (54)9.4通风阻力计算 (57)9.5通风制度 (58)9.6通风设施 (58)9.7通风设备选型 (58)第十章矿井供风供水供电 (62)10.1矿井供风 (62)10.2矿山供水条件 (62)10.3矿井供配电 (63)第十一章矿井排水 (64)11.1矿井涌水量及其确定依据 (64)11.2排水系统及工程设施 (64)第十二章劳动安全与工业卫生 (66)12.1劳动安全 (66)12.2工业卫生 (69)第十三章矿山环境保护 (71)13.1矿山主要污染源及污染物 (71)13.2采矿车间环境及保护 (71)13.3其它污染源及环境保护 (72)第十四章总图 (73)14.1矿山地理位置及总图布置 (73)14.2矿区运输 (73)第十五章投资概算与技术经济 (75)15.1投资概算 (75)15.2技术经济 (76)附录 (79)参考文献 (80)致谢 (81)第一章总论1.1 矿山概况武山铜矿位于江西省瑞昌市白杨镇内,矿区中心地理坐标东经'38115 ,北纬'29 ,瑞码公路横贯矿区西侧,南行8km到瑞昌市,转而东行35km到九江44市,北行12km至长江边瑞昌市码头镇。
《毕业设计说明书》内容提纲第一章矿区概述及井田特征第一节矿区概述矿区的地理位置(附地理位置图)及行政隶属关系。
矿区地形地貌,矿区内有关的主要企业单位。
电源、水源及建筑材料的来源。
矿区内贸易中心、火车站及其他主要场地的位置。
矿区的气候特点;气温、风向、风速,雨期及降雨量,冻结期及冻结深度等,综述矿区的开发条件。
第二节井田及其附近的地质特征井田的地层层位关系、地质构造、含煤系及地层特征以井田地层柱状图说明,煤田的成因及生成年代、煤层的总数及可采层数,表土层及风化带的深度。
井田中的地质变动,最主要的破坏及其形式——断层、褶曲、火成岩侵入等,区域变质及侵入等,区域变质及侵入变质的程度,它们的分布及位置。
水文情况:井田范围内的河流,流量及洪水位,流沙层,含水层的厚度及分布,含水系数及渗透系数,溶洞水的静储量及水力联系,断层的透水性质及水力联系。
第三节煤层及煤质特征井田的煤层及其埋藏条件:走向、倾向、倾角,可采层的厚度及层间距。
各煤层的性质,顶底板岩石的性质。
煤层的瓦斯性,自燃及煤尘爆炸性,含水性。
煤的牌号,工业分析及工业用途。
第四节井田的勘探程度及对对勘探的要求。
第二章井田境界及埋藏量第一节井田境界第二节叙述井田走向边界及倾斜方向上的边界,边界的方位或标高,井田走向及倾向尺寸,井田的面积,边界煤柱的留法及尺寸。
邻近井田的开发情况以及与本矿的关系。
论述所定边界的合理性。
第三节井田的埋藏量井田的工业储量,地质损失,永久煤柱损失。
井田的可采储量及开采损失。
第三章矿井的年产量、服务年限及一般工作制度第一节年产量及服务年限确定矿井生产能力并论证其依据。
根据井田可采储量计算矿井设计服务年限,阐明矿井生产能力与其服务年限的关系应符合设计规范和煤炭工业技术政策的要求。
第二节矿井的一般工作制度矿井的年工作日,每昼夜工作班数,出煤班数,每班工作时数,每昼夜的提升时数等。
第四章井田开拓井田开拓方案的确定,一般应先提出两个以上比较合理可行的方案进行技术经济分析对比后,选择其中的最优方案作为本章的开拓方案。
附件3:
华北科技学院
2017 届本科毕业设计(论文)开题报告
论文题目:新巨龙煤矿5.0Mt/a新井设计
专题题目:综采放顶煤工作面顶煤回收率提高途径研究
学生姓名:蔡先锋学号:201310014229
院(部):安全工程学院
专业:采矿工程班级:采矿B132
指导教师:高林生
2017年04 月01日
开题报告填写要求
1. 开题报告作为毕业设计(论文)答辩委员会对学生答辩资格审查的依据材料之一。
在指导教师指导下,学生在毕业设计(论文)工作开始前完成,指导教师签署意见、系(教研室)审查后生效;
2. 学生应按照统一要求(从教务处网站下载开题报告标准格式电子文档)填写开题报告,其中:字体小4号宋体,行距20磅,日期的填写一律用阿拉伯数字书写,如“2016年1月17日”或“2016-01-17”;
3. 根据专业的具体情况,学生应查阅一定数量的参考文献(不包括辞典、手册);
4. 完成后及时交给指导教师签署意见。
2017 届本科毕业设计(论文)开题报告
2017 届本科毕业设计(论文)开题报告。
采矿工程专业毕业设计论文:采矿工程专业矿区生态恢复与保护Title: Mine Site Ecological Restoration and Protection in Mining EngineeringAbstract:With the development of mining engineering, the ecological environment in mining areas has suffered severe degradation. In order to promote sustainable development and protect the ecosystem, it is necessary to explore effective methods for ecological restoration and protection in mining engineering. This research paper aims to analyze the current status of mine site ecological restoration and propose practical measures for the sustainable development of mining areas.1. Introduction1.1 Background1.2 Research Objective2. Current Status of Mine Site Ecological Restoration2.1 Ecological Degradation in Mining Areas2.2 Challenges in Ecological Restoration2.3 Case Studies of Successful Ecological Restoration Projects3. Principles and Methods of Ecological Restoration3.1 Ecological Restoration Principles3.2 Ecological Restoration Techniques3.2.1 Soil Quality Improvement3.2.2 Reforestation and Habitat Rehabilitation3.2.3 Water Resource Management3.2.4 Sustainable Land Use Planning4. Ecological Protection Measures in Mining Engineering4.1 Environmental Impact Assessment4.2 Mine Water Treatment and Recycling4.3 Dust and Noise Control4.4 Biodiversity Conservation5. Case Study: Ecological Restoration and Protection in a Mining Area5.1 Project Background and Objectives5.2 Implementation of Ecological Restoration Measures5.3 Monitoring and Evaluation of Ecological Restoration Results5.4 Lessons Learned and Recommendations6. Conclusion6.1 Summary of Key Findings6.2 Significance and Implications6.3 Future Research DirectionKeywords: mining engineering, ecological restoration, ecological protection, sustainable development, biodiversity conservation, environmental impact assessmentIntroduction:1.1 Background:Mining activities have a significant impact on the environment, resulting in soil erosion, water pollution, habitat destruction, andreduced biodiversity. The restoration and protection of mine sites are essential to mitigate these adverse effects and ensure sustainable development in mining areas.1.2 Research Objective:This study aims to investigate the current status of mine site ecological restoration and propose practical measures for the sustainable development of mining areas. Through case studies and analysis, it intends to provide guidance for future mine site restoration projects.Current Status of Mine Site Ecological Restoration:2.1 Ecological Degradation in Mining Areas:Mining operations contribute to ecological degradation through land disturbance, deforestation, erosion, and water contamination. These activities often result in the loss of habitat for wildlife and the disruption of natural ecosystems.2.2 Challenges in Ecological Restoration:The restoration of mine sites faces challenges such as contaminated soil and water, lack of suitable seed sources for reforestation, and difficulty in establishing self-sustaining ecosystems. Additionally, financial constraints and limited technical expertise pose obstacles to effective restoration measures.2.3 Case Studies of Successful Ecological Restoration Projects: Several successful ecological restoration projects have been conducted in mining areas worldwide. These projects emphasize soil remediation, reforestation, and the establishment of wetlandsto promote biodiversity and ecosystem recovery.Principles and Methods of Ecological Restoration:3.1 Ecological Restoration Principles:Principles such as comprehensive planning, stakeholder engagement, adaptive management, and native species utilization form the basis of successful ecological restoration. These principles ensure the restoration goals are ecologically sound, socially acceptable, and economically feasible.3.2 Ecological Restoration Techniques:Various techniques are employed in mine site restoration, including soil quality improvement, reforestation, habitat rehabilitation, water resource management, and sustainable land use planning. These techniques aim to restore the ecological functions and services of the mining area.Ecological Protection Measures in Mining Engineering:4.1 Environmental Impact Assessment:A thorough environmental impact assessment is crucial in identifying potential impacts of mining activities and proposing mitigation measures to minimize adverse effects. This assessment enables effective decision-making and ensures compliance with environmental regulations.4.2 Mine Water Treatment and Recycling:Mining often leads to the generation of large volumes of wastewater contaminated with heavy metals and chemicals. Propertreatment and recycling of mine water can reduce water pollution and minimize the demand for freshwater resources.4.3 Dust and Noise Control:Mining operations generate significant amounts of dust and noise, which can have detrimental effects on human health and nearby ecosystems. Effective measures such as dust suppression systems and noise barriers should be implemented to minimize these impacts.4.4 Biodiversity Conservation:Protecting and enhancing biodiversity within mining areas is vital for ecosystem stability and resilience. Preserving habitats, promoting reforestation, and implementing wildlife conservation measures are essential in maintaining a balanced and diverse ecosystem.Case Study: Ecological Restoration and Protection in a Mining Area:5.1 Project Background and Objectives:This case study focuses on a specific mining area, highlighting the issues faced and the objectives set for ecological restoration and protection.5.2 Implementation of Ecological Restoration Measures:The case study outlines the restoration techniques utilized, including soil remediation, reforestation, wetland establishment, and wildlife habitat rehabilitation.5.3 Monitoring and Evaluation of Ecological Restoration Results: Monitoring protocols are crucial in assessing the effectiveness of restoration measures over time. This section discusses the monitoring and evaluation methods used to determine the success of the ecological restoration project.5.4 Lessons Learned and Recommendations:Insights gained from the case study provide valuable lessons and recommendations for future mine site restoration projects. These could include improving stakeholder engagement, utilizing adaptive management strategies, and investing in long-term monitoring and maintenance.Conclusion:6.1 Summary of Key Findings:This study highlights the importance of mine site ecological restoration and the challenges associated with it. Successful restoration projects rely on the principles of comprehensive planning, stakeholder engagement, adaptive management, and native species utilization.6.2 Significance and Implications:Ecological restoration and protection in mining engineering are critical for mitigating the adverse environmental impacts of mining activities and promoting sustainable development in mining areas. The findings and recommendations of this study contribute to the development of effective restoration strategies and initiatives.6.3 Future Research Direction:Further research should focus on the development of innovative and sustainable techniques for mine site restoration, as well as the integration of restoration practices into the lifecycle of mining projects. Additionally, interdisciplinary approaches involving mining engineering, ecology, and environmental science should be emphasized for holistic restoration efforts.Keywords: mining engineering, ecological restoration, ecological protection, sustainable development, biodiversity conservation, environmental impact assessment继续写相关内容2000字:在采矿工程的发展过程中,矿区的生态环境遭受了严重破坏。
淮北矿业集团石台煤矿初步设计摘要本设计的井田面积为20.1平方千米,年产量120万吨。
井田内煤层赋存比较稳定,煤层倾角8-22°,平均煤厚3.48m,整体地质条件比较简单,在井田范围南部和中央均有断层发育。
瓦斯和二氧化碳含量相对不高,涌水量也不大。
根据实际的地质资料情况进行井田开拓和准备方式的初步设计,该矿井决定采用三立井上山开采,煤层分采区上山联合布置的开拓方式,设计采用综合机械化一次采全高回采工艺,走向长壁采煤法,用全部跨落法处理采空区。
并对矿井运输、矿井提升、矿井排水和矿井通风等各个生产系统的设备选型计算,以及对矿井安全技术措施和环境保护提出要求,完成整个矿井的初步设计。
矿井全部实现机械化,采用先进技术和借鉴已实现高产高效现代化矿井的经验,实现一矿一面高产高效矿井从而达到良好的经济效益和社会效益。
关键词:立井、走向长壁、一次采全高、综合机械化、高产高效AbstractThese designed allotment area for 20.1 square kilometers,Yearly Output 120 trillion. Allotment intrinsically ocurrence of coal seam compare stabilize,coal seam pitch 8-22acid,average coal thick 3.48m,integrally nature condition compare simplicity,at allotment scope east normalizing function of the stomach and pleen center equal have got dislocation upgrowth. Both methane and carbon dioxide content relatively do not high, and neither do inflow of water no large either. On the basis of Preliminary Design,said shaft opt in adopt three vertical shaft fluctuate mountain exploitation,coal seam grouping band region fluctuate mountain co- disposal 'mode of opening,design adopt comprehensive mechanization full-seam mining stopper art,Alignment longwall method,treat goaf with whole straddle alight law from actual geologic information instance proceed allotment exploit and stand-by mode. The Preliminary Design of the both combine versus mine haul, shaft exaltation, shaft drain and ventilation of mines isopuant systemic equipment lectotype count,as well as versus shaft technical safety measures and environmental protection claim,complete wholly shaft. Both shaft whole realize mechanization,adopt advanced techniques and use for reference afterwards realize high yield highly active modernization shaft 'experience,realize one mine not both high yield highly active shaft thereby run up to favorable economic benefit and social benefit.Keywords: Vertical shaft, Alignment long wall , full-seam mining, comprehensive mechanization, high yield highly active.前言本次毕业设计是据在淮北矿业集团石台煤矿进行的毕业实习中所收集的矿井生产图纸和资料,并作了一些改动以后,对矿井进行的初步设计。
前言羊市塔三矿位于鄂尔多斯市准格尔旗薛家湾镇西南部,行政区划隶属于准格尔旗羊市塔乡。
为设计生产能力1.2Mt/a的新建矿井。
矿井由内蒙古汇能煤电集团有限公司承建。
承建单位为股份制企业,公司成立于2001年,公司业务以煤炭及电力的生产、销售以及商品公路建设、经营为主。
公司现拥有中型煤炭生产、销售企业六个。
(分别为布尔洞沟、宝平湾、富安、猪亥门、公沟及泰山煤矿)。
商品公路85公里。
公司投资建设的蒙南火力发电厂2×60MW一期工程目前已基本具备并网发电条件。
一、矿井建设的必要性与可行性1、内蒙古汇能煤电集团是内蒙古自治区重点扶持的20家大型煤炭企业之一,未来几年要形成年产千万吨规模。
羊市塔三矿是汇能公司规划建设的大中型矿井之一。
2003年5月27日经内蒙古自治区国土资源厅批准汇能煤电集团获得矿井探矿权。
证号:1500000310230;2004年6月内蒙古自治区矿产资源储量评审中心对《内蒙古自治区东胜煤田山不拉东部矿区煤炭详查报告》矿产资源储量进行了评审(文件编号:内国土资储审字[2004]057号);之后内蒙古国土资源厅对矿井资源储量进行了备案,文件编号内国土资储备字〔2004〕119号。
2005年9月,汇能煤电集团取得羊市塔三矿中华人民共和国采矿许可证,证号:1500000510817。
2005年10月内蒙古自治区煤炭工业局组织有关部门与专家对羊市塔三矿可行性研究报告进行了审查,并以内煤局字[2005]144号文进行了批复。
2、根据鄂尔多斯市煤炭工业“十五”计划中《关于在东胜煤田南部精煤产区重点开发低硫、低灰煤炭深加工工业的规划》为实现煤炭资源优势向经济优势转化,提升经济、社会效益。
以煤产品就地深加工转化延长东胜煤炭工业的产业链。
汇能煤电集团有限责任有限公司规划了鄂而多斯市悖牛川煤电、煤化工基地。
基地位于伊金霍洛旗新庙镇境内的布尔洞门村和新庙村之悖牛川东岸,悖牛川大桥以南延伸5公里的区域内。
目录1 矿区概况及井田地质特征 (1)1.1 矿区概况 (1)1.1.1 位置及交通 (1)1.1.2 地形地貌 (1)1.1.3 水系及主要河流 (1)1.1.4 气象及地震情况 (2)1.1.5 区域经济概况 (2)1.1.6 矿区总体规划情况 (2)1.2 矿井外部条件及评价 (2)1.2.1 运输条件 (2)1.2.2 电源条件 (3)1.2.3 水源条件 (3)1.2.4 通信条件 (3)1.2.5 外部建设条件综合评价 (3)1.3 矿井资源条件 (3)1.3.1 区域地层 (3)1.3.2 井田地层 (4)1.3.3 区域构造 (6)1.3.4 井田构造 (7)1.4 煤层及煤质 (7)1.4.1 含煤地层 (7)1.4.2 可采煤层特征 (7)1.4.3 煤类、煤质与煤的用途 (7)1.4.4 瓦斯 (8)1.4.5 煤尘 (8)1.4.6 煤的自燃 (8)1.4.7 地温 (9)1.4.8 水文地质条件 (9)1.4.9 地下水的补给、迳流、排泄条件 (9)1.4.10 含、隔水层水文地质特征 (9)2 矿井资源和储量 (12)2.1 井田境界 (12)2.1.2 井田面积 (12)2.2 矿井工业储量 (14)2.2.1 井田勘探类型 (14)2.2.2 矿井资源储量 (14)2.3 矿井可采储量 (15)2.3.1 矿井永久保护煤柱损失量 (15)2.3.2 矿井可采储量 (17)3. 矿井设计生产能力及服务年限 (19)3.1 矿井工作制度 (19)3.2矿井设计生产能力及服务年限 (19)3.2.1 矿井设计生产能力 (19)3.2.2 矿井服务年限 (19)3.2.3 井型校核 (19)4. 井田开拓 (21)4.1 井田开拓方式及井口位置 (21)4.1.1 确定井筒形式、数目、位置及坐标 (21)4.1.2 工业广场的位置、形状和面积的确定 (22)4.1.3 开采水平的确定 (23)4.1.4 风井井口位置及井筒形式的确定 (23)4.1.5开拓方案比较 (23)4.2 矿井基本巷道 (27)4.2.1 井筒 (27)4.2.2 井底车场及硐室............................................................ 错误!未定义书签。
湘潭大学毕业设计说明书题目:采区设计院系:职业技术学院资源与环境工程系专业:煤矿开采技术学号: 20089214124姓名:王琪钱指导老师:徐养平完成日期:2011-5-15毕业设计任务书专业班级姓名设计题目设计条件及要求:设计时间:自月日至月日设计指导人:专业科主任:年月日指导人语:指导人年月日毕业设计答辩委员会毕业设计成绩评定书专业班级姓名毕业设计题目经毕业设计答辩,评定同学的毕业设计成绩毕业设计答辩委员会(答辩小组)主任(组长)副主任(副组长)日期年月日前言目录前言………………………………………………………...第一章矿井概况………………………………………. 第二章采区地质情况………………………………………第一节采区概况…………………………………………第二节采区地质情况…………………………………….第三章采区储量与生产能力…………………………第一节采区储量………………………………………….第二节采取生产能力及服务年限………………………第四章采区方案设计………………………………第一节采煤方法选择…………………………………….第二节采区巷道布置…………………………………….第三节开采顺序………………………………………….第四节采区车场与硐室………………………………….第五章回采工艺与技术管理…………………………第一节回采工艺……………………………………………第二节回采工作面技术管理………………………………第三节回采工作面技术经济指标……………………………第六章采区生产系统……………………………………. 第一节采区运输系统…………………………………………第二节采区通风………………………………………………第三节采区供电………………………………………………第七章采区车场与硐室……………………………………. 第一节采区上部车场………………………………………….第二节采区中部车场……………………………………………第三节采区下部车场……………………………………………. 第四节采区硐室………………………………………………….. 第八章安全技术措施…………………………………………第九章采区施工准备与采掘交替计划…………………………淝江煤矿交通位置图耒阳市淝江煤矿注第一章矿井概况一、矿井名称、位置、交通概况淝江井田位于郴耒煤田白沙向斜东翼,位于耒阳市东南约 14公里,属于南阳镇管辖。
采矿工程专业毕业设计论文:采矿工程专业生产调度与优化方法研究采矿工程专业生产调度与优化方法研究摘要:随着现代采矿技术的进步和煤矿生产力的不断提高,对采矿工程专业生产调度和优化方法的研究需求也越来越迫切。
本论文主要研究采矿工程专业生产调度与优化方法,总结了目前常用的生产调度方法,并对其进行了评价和比较。
同时,还提出了一种基于智能算法的采矿生产调度与优化方法,并进行了算法设计和实例分析。
1. 引言采矿工程是一门涉及地质学、地质力学、矿山工程学等多学科交叉的工程学科,其核心任务是有效率地开采矿产资源。
生产调度与优化方法是指在矿井生产过程中,通过合理的资源配置和作业安排,最大限度地提高生产效率和经济效益的方法。
2. 常见的生产调度方法2.1 传统的生产调度方法传统的生产调度方法主要基于经验和直觉,通过人工调度和手动计划来安排矿井的生产活动。
这种方法的优点是简单易行,但缺点也很明显,容易受到主观因素的影响,调度效果不稳定,不适应大规模的矿山生产。
2.2 数学规划方法数学规划方法是指借助数学模型和优化算法,通过对生产过程进行建模和求解,得到最优的资源配置和作业安排方案。
常见的数学规划方法包括线性规划、整数规划、动态规划等。
这种方法的优点是能够得到较为准确的调度方案,但其缺点是计算复杂度高,对问题的假设前提要求高。
3. 基于智能算法的生产调度与优化方法为了克服传统方法的缺点,近年来,基于智能算法的生产调度与优化方法逐渐受到人们的关注。
智能算法是指模仿自然界智能生物行为的计算方法,如遗传算法、蚁群算法、禁忌搜索算法等。
这些算法通过优化搜索和模拟演化的方式,来获得最优的调度方案。
4. 算法设计与实例分析以遗传算法为例,进行算法设计和实例分析。
首先,建立适应度函数,将矿井生产调度问题转化为优化问题。
然后,设计遗传算法的编码方式、选择算子、交叉算子、变异算子等。
最后,进行实例分析,通过实际数据的输入和模拟计算的输出,评估该算法的效果和优点。
采矿工程(煤矿开采)专业(专科)毕业实习与毕业设计指导书
设计人胡贵生学号
指导教师
目录
第一章矿井基本概况1
第一节矿井开采范围及井田划分1第二节矿井开采煤层情况3第二章矿井初步设计7第一节矿井生产能力确定7第三章采区生产能力与区段划分23第一节采区煤层条件23第二节采区设计生产能力及服务年限24第三节采区区段数目划分26 第四章采区巷道布置设计31
第一节采区下山布置方案31 第二节采区车场形式选择设计35 第三节采区主要硐室35 第四节采区通风设计35 第六节采区主要生产系统39
第五章采煤工工作面回采工艺设计42
第一节工作面基本条件42 第二节工作面回采工艺方式44
第六章工作面生产技术管理49
第一节采煤工作面生产技术组织管理49 第二节掘进工作面生产组织53
第七章安全技术管理措施58
第一节采煤工作面安全技术管理58 第二节灾害防治措施与避灾路线90
致谢91参考文献92
摘要
采矿工程毕业设计是采矿工程专业全部教学进程中的最后一个环节,同时也是对学生成绩的最终考核,其目的是使学生深入认识矿井各个生产系统和各个生产环节之间的相互联系和制约关系,培养学生综合运用各门学科的理论知识,分析和解决采矿工程技术问题的能力;培养和锻炼学生独立地进行学习和工作的能力;培养学生搜集、整理、运用科技资料和生产技术经验的能力;进一步训练撰写技术文件和绘制工程图件的基本技能。
矿井设计是一个涉及煤矿开采学、井巷工程、矿山机械、矿井通风与安全、矿山环保等诸多技术科学的系统工程,虽然本次设计题目中存在一些理想化的条件,但是通过这次设计,我已经基本掌握了矿井设计的方法和步骤,培养了搜集、整理、运用科技资料和生产技术经验的能力,提高了撰写技术文件和解决实际问题的能力。
这些能力的培养对以后走上工作岗位做了良好的铺垫。
本次设计的参照矿井是平宝公司首山一矿,本次设计就是在平宝公司首山一矿实际地质条件的基础上,根据收集到的矿井生产图纸和数据,按照指导老师的要求作了一些改动后,对矿井做出的初步设计。
其主要内容包括:矿区概况及井田地质特征;矿井储量、年产量及服务年限;井田开拓;准备方式;矿井通风与安全技术等六个方面。
本设计以《毕业设计论文大纲》为依据,按照《安全规程》的要求,经过查阅相关资料和老师的精心指导而完成,由于本人知识结构的限制和设计能力有限,设计中难免有不妥和错误之处,恳请审阅老师批评指正。