GWR4manual_GWR4软件操作手册2014年更新

G4HRP 系统操作手册:常用操作技巧1多条件查询在系统菜单栏点击《查询》按扭——弹出如下查询窗口在窗口项目下拉框选择要查询项目一一选择查询条件一一在结果栏输入要查询的结果值一一若是多条件查询要在连接 条件栏选择连接条件（and:并且or:或者）;若只是一个条件查询（或者已是最后一个条件）时，则不须选择连接条件一一按 《添加》按扭把查询条件加入已添加的查询条件框一一查询条件选择完后按《确定》按扭一一得到所查询结果； 2.快速定位查询查询范围：查询结果已经在 grid 窗口中。

点击窗体左边系统菜单下边的《项目》TAB 页—— TAB 页中双击要查询的项目——在《关键字搜索》右边输入框中输入要查询的结果值——按回车——右边窗口中将蓝色显示查询的结果。

3.动态查询当有时只需要在grid 窗口中显示部分字段内容时一一就可以用动态查询:在选择一个或多个列下面的窗口中单击有显示的字段一一点击的顺序即是显示的顺序一一在显示方式框中选择显)& .宇 毎件：Or:Or:Cr.在系统菜单栏点击《高级操作》——按〈动态查询〉弹出如下窗口~字耳看衣儿军!也 G4巳0 KT 豆賓冥育理接飯1 .选怪一-卜或多于列bh ID 卡编号ybm工号 xm姓名 bmbh单血同号 xsfeh身將证吕 bm 单位2.在相应的刊框内镉入寄.f 半歹LS列标療!全选示方式（默认是网表）一一按〈确定〉一一得到所需要的显示结果。

4 •多条件排序在系统菜单栏点击《排序》按扭——弹出如下排序窗口在排序窗口 一一《可选择字段》中双击要排序的字段一一该字段将被选入排序字段窗口中且其后带有一个复选框 （默 认是打V ――表示升序；去掉"则按降序排列 ）；字段排序按在排序字段列表中排列的先后排序；一一最后按《确 定》一一得到排序结果。

5 •按一个字段排序 在grid 窗口中双击要排序的字段即可，双击一次（单数次）-按升序排序一一双击两次 （偶数次）则按降序排序一一得到 要显示的结果。

TerraGate用户操作手册v4.5TerraGate用户操作手册v4.5东方道迩GIS事业部____年1月TerraGate用户操作手册v4.5目录1．TerraGate操作简介 ................................................................... .. (1)1.1 TerraGateManager .............................................................. (1)1.1.1关于TerraGate Manager............................................................... ............ 1 1.1.2 开始和停止服务.................................................................... .................... 2 1.2 TerrainService .............................................................. . (2)1.2.1 Terrain Service Settings（地形服务设置） ................................................ 2 1.2.2 Terrain Service Statistics（地形服务统计） ............................................. 11 1.2.3 Terrain Databases（地形数据集） .......................................................... 13 1.2.4 DirectConnect（直连）.................................................................. ......... 14 1.2.5 Internet License（互联网许可） (15)1.2.6使用TerraGate以流方式输出FLY文件................................................... 16 1.2.7 TerraGate 程序 ................................................................... .................... 16 1.2.8 TerraGate和Microsoft IIS................................................................... .... 16 1.3 DirectConnectE_tension ............................................................ . (17)1.3.1 DirectConnect E_tension概述 (17)1.3.2 什么是TerraBuilderFuser？ .............................................................. .... 17 1.3.3 DirectConnect TerraBuilder工程文件..................................................... 17 1.3.4 创建Fuser计算机 ................................................................... ............... 22 1.3.5 创建TerraGate登录属性 ................................................................... ..... 24 1.3.6 显示效果 ................................................................... ............................. 25 1.4 Internet LicenseService .............................................................. (26)1.4.1 Internet License设置 ................................................................... ........... 27 1.4.2使用Internet License创建网页 (27)1.5 Collaboration Service............................................................... . (28)1.5.1 Collaboration ServiceSettings ............................................................. ... 28 1.5.2 Collaboration和Terrain Service..............................................................302．开始使用SFS .................................................................. . (30)ITerraGate用户操作手册v4.52.1 启动SFS Web管理 ................................................................... ...................... 30 2.2 SFS管理器.................................................................... .. (31)2.2.1首次配置SFS Web管理 ................................................................... ...... 31 2.2.2 关于SFS管理器 ................................................................... ................. 31 2.2.3 主服务器页面 ................................................................... ...................... 32 2.2.4 本地服务器设置.................................................................... .................. 35 2.2.5 SFS设置 ................................................................... ............................. 36 2.2.6 用户设置 ................................................................... ............................. 38 2.2.7 IIS 日志 ................................................................... ............................... 39 2.2.8 服务器消息.................................................................... ......................... 41 2.2.9 常见问题解决方法 ................................................................... ............... 42 2.3 Web Feature Service（WFS） .............................................................. (43)2.3.1 关于Web FeatureService? ............................................................. ...... 43 2.3.2 WFS可输入数据源 ................................................................... .............. 43 2.3.3 Layers（图层） ................................................................. ..................... 48 2.3.4 运行性能小贴士、指导 ................................................................... ........ 54 2.4 使用SFS CacheCreator（缓存生成器） (56)2.4.1 什么是SFS CacheCreator（缓存生成器）?........................................... 56 2.4.2 安装SFSCacheCreator（缓存生成器） ................................................ 56 2.4.3 SFS CacheCreator(缓存生成器)输出文件 ............................................... 57 2.4.4 如何使用SFS 缓存生成器 ................................................................... ... 57 2.5 Web Map Service （WMS）............................................................... (62)2.5.1 什么是Web Map Service（WMS）？ .................................................... 62 2.5.2 WMS可输入数据源 ................................................................... ............. 63 2.5.3 Layers（图层） ................................................................. (64)3．TerraGate技术流程 ................................................................... (67)3.1 TerraGate基本设置 ................................................................... ....................... 68 3.2 TerraE_plorer Pro客户端连接 ................................................................... .. (71)IITerraGate用户操作手册v4.51．TerraGate操作简介1.1 TerraGate Manager1.1.1关于TerraGate Manager在TerraGate Manager主（Main）选项卡中，用户可以控制和监测地形服务，互联网许可服务和协作通信服务。

GWR4使用手册一、引言本使用手册旨在为用户提供关于GWR4系统的全面指南，帮助您了解该系统的功能、安装、配置、操作以及常见问题的解决方案。

通过阅读本手册，您将能够充分利用GWR4系统的强大功能，提高工作效率。

二、GWR4系统概述GWR4系统是一款基于云计算的地理信息系统（GIS），具有强大的地图可视化、空间数据管理和分析功能。

该系统适用于各种行业和应用场景，如城市规划、环境保护、资源管理等。

通过GWR4系统，用户可以轻松地处理、分析和呈现地理空间数据，为决策提供有力支持。

三、安装与配置1.安装环境：确保您的计算机满足GWR4系统的最低系统要求，包括操作系统、内存、硬盘空间等。

2.下载与安装：从官方网站下载GWR4系统的安装程序，按照屏幕提示完成安装过程。

3.配置网络：确保您的计算机能够访问互联网，以便进行实时数据更新和系统更新。

4.启动与登录：打开GWR4系统，使用您注册的用户名和密码登录。

四、用户界面与操作1.主界面：GWR4系统的主界面包括菜单栏、工具栏、地图窗口和属性窗口等部分。

2.地图操作：使用鼠标滚轮放大/缩小地图，按住鼠标左键拖动地图，以及通过工具栏选择地图图层等。

3.数据查询：在属性窗口中输入查询条件，筛选出符合条件的空间数据。

4.数据分析：利用GWR4系统的分析工具，对空间数据进行各种分析，如缓冲区分析、叠置分析等。

5.可视化呈现：通过地图的视觉呈现，将空间数据以图表、报表等形式展示出来。

五、数据导入与导出1.数据格式：支持多种数据格式，如Shapefile、GeoJSON、CSV等。

2.导入数据：通过菜单栏选择“文件”>“导入”，选择要导入的数据文件，按照提示完成导入过程。

3.导出数据：通过菜单栏选择“文件”>“导出”，选择要导出的数据图层或查询结果，按照提示完成导出过程。

4.数据同步：将本地数据与云端数据进行同步，确保数据的实时性和准确性。

六、高级功能与定制1.脚本编程：支持Python脚本语言，允许用户自定义功能和扩展系统功能。

Impulse X4 系列便携式复合气体检测仪操作说明书！重要提示：！在首次使用仪器以前请认真阅读本手册，您将会掌握仪器正确的使用方法和了解仪器的功能，包括操作，维护，功能设置等内容。

！为了使操作者更安全，请按照手册中的要求，定期对仪器进行标定。

！如果在使用过程中，遇到的故障或问题在本手册中没有提到，请直接联系制造商Zellweger Analytics，或联系当地的代理商/服务商。

！警告和注意：·更换任何元器件都有可能损坏仪器的本质安全结构。

·如果需要使用存储卡，请选用Zellweger Analytics 提供的存储卡（订货号2566-0435），使用其它的存储卡有可能损坏仪器的本质安全结构。

·在允许的储存期之后激活检测器，有可能影响仪器的使用性能和保质期。

·应使用许可的5号干电池，如劲量电池，不要使用质量低下的干电池，以免影响仪器的本质安全性能。

·在更换电池时，应同时更换2节型号相同的新电池。

·在电池欠压提示后，应尽快更换新电池，以免旧电池漏液损坏仪器。

·在低温环境下，电池的寿命会缩短。

·更换电池时，应该在安全环境下进行。

·当更换任何一个传感器的情况下，都需要对仪器进行标定。

·在每天使用以前，应完成仪器的自检过程。

·定期的对仪器用标气进行测试，检查声、光、振动报警是否正常。

·标定时应选用厂家或国家认证合格企业提供的标准气体。

·标定时应在良好通风的环境下进行，以避免污染。

·不要在仪器电量不足的情况下标定。

·不要在富氧的环境下使用本仪器。

·可燃气体传感器的灵敏度会受到高浓度硫化物，卤素化合物，含硅化合物，以及含铅气体或蒸汽的影响，也叫“中毒”，应避免在以上的环境中使用仪器，如果必须使用，则使用完后应对仪器进行检测和标定，以免影响以后的使用。

上海云速网络科技有限公司Go-Global For Windows操作手册上海云速网络科技有限公司shanghai appacc－Tech Co.,LtdTel:(86)021- 50278021目录第一章安装要求 (3)第二章软件安装 (3)2.1 安装步骤 (3)2.2调试IIS 右击【我的电脑】【管理】 (8)2.3 许可导入 (9)2.4 启动服务进程 (11)第三章操作说明 (12)3.1 Cluster Manager (12)3.2 Go-Global Server状态设定 (17)3.3 Load Balancing (23)3.5安装Windows Client (31)3.6 Global 客户端登录 (32)3.7 客户端打印机设置 (37)第四章外网发布 (39)第一章安装要求系统安装Global 4.0 分32位和64位版本：Windows Server 2008 Standard or Enterprise Edition with Service Pack 2 (x86 and x64) Windows Server 2008 R2 Standard or Enterprise Edition (x64)Windows Server 2003 R2 Standard or Enterprise Edition (x86)Windows Server 2003 Standard or Enterprise Edition with Service Pack 2 (x86) Windows 7 (x64)Windows Vista with Service Pack 2 (x86 and x64)Windows XP Professional with Service Pack 3 (x86)网页要求IIS或者Apache作用：网页登录GLOBAL ；提供下载不同版本系统客户端。

手册引导内容提要1介绍1.1手册结构1.2补充文件1.3操作手册使用人群1.4手册中使用的信号和警示1.5使用的方式和缩写1.6版本附件2设备描述2.1目的2.2潜在的危险3总述3.1电源3.2外加24VDC3.3使用的电缆型号3.4安全须知3.4.1Congrav RC-4使用安全须知3.4.2安装安全须知3.4.3接线安全须知3.4.4使用和操作安全须知4硬件描述4.1Congrav RC-4：类型4.2Congrav RC-4A：显示和按键4.2.1集成按键及其功能4.2.2显示和功能组成4.3参数更改4.3.1数字输入4.3.2固定参数设置的选择4.3.3如果….，更改参数不被接受4.4Congrav RC-4B：4.5Congrav RC-4的插卡槽4.5.1现场的可能连线4.6Congrav RC-4的基本功能4.6.1插入卡RC4-MSIO4.6.1.1XS1.1：与主计算机的连接4.6.1.2XS1.2：与ISC现场总线的连接4.6.1.3XS1.3：与调试解调器和工控电脑的连接4.7Congrav RC-4的选项卡4.7.1CDIO插入卡4.7.2DIOP插入卡4.7.2.1输入输出模式－数字式RC-4的终端功能4.7.3ANOP插入卡4.7.3.1输入输出模式－模拟式RC-4的终端功能4.7.4Profibus模式5调试5.1安装5.2调试，Congrav RC-4的开机5.3Congrav RC-4：软件升级5.4ISC-CM：软件升级6菜单页F100安装结构6.1F110：安装模式6.2模拟结构6.3F120：主计算机操作6.4F130：显示内容改变6.5连锁停机6.6时间和日期6.7F150：配方处理6.7.1设定值斜线，设定值阈值6.7.2调试操作7F200：打印机结构，内存值重设7.1打印功能7.2F210：如何清除记忆内容8F300：设定值输入和选择8.1安装设定值8.2加料器设定值8.2.1`设定值的模拟控制8.2.2设定值斜线，设定值阈值（菜单页F150）8.3选项8.4F310：滞后时间8.5报警停机9F400：安装的实际值，总产量重设9.1F430：总产量重设10单台加料器操作10.1加料器页的抬头10.2Kxx0：加料器控制10.3操作功能10.3.1开机 5410.3.2停机 5410.3.3报警重设10.3.4补料 5510.3.5删除 5510.3.6开始试样10.3.7开始去皮10.3.8右侧行实际值的显示10.4Kxx1：产品参数10.4.1自动去皮10.4.2检查最大输出10.4.3堆积密度10.4.4体积最大输出10.4.5十进制转换10.4.5.1十进制转换的设置10.4.6模式 5910.4.6.1失重式加料（GF）10.4.6.2体积式控制（VR）10.4.6.3体积式设置（VS）10.4.6.4排料（DI）10.4.6.5检查最大输出（CM）10.4.6.6重量式排料（GD）10.4.6.7体积式加料（VF）10.4.6.8测量（M）10.4.6.9运行过程中GF和VF模式转换10.5Kxx2：控制参数10.5.1PID控制的设置10.5.1.1控制成套配合10.5.1.2重量式计算最大输出10.5.1.2.1CM值的存储11F500：报警报告和开机条件11.1报警报告11.2缺省的开机条件11.3系列驱动控制操作的错误代码11.3.1系列变频器11.3.2振动放大器控制器ISC-VC11.4Kxx5：报警结构12硬件结构12.1 Kxx8：ISC-CM(-A)的硬件结构12.1.1 速度输入12.1.2 传感器（重量读取）的结构12.1.3 驱动控制器12.1.4 ISC-CM-A模拟输入输出的结构12.1.4.1 ISC-CM-A上单台控制的选项12.1.4.2 Kxx8：模拟输入12.1.4.3 Kxx8：模拟输出12.2 ANOP模拟输入输出的结构12.2.1 安装控制和安装的实际值12.2.1.1 菜单页F190的参数12.2.2 ANOP的组分功能12.2.2.1 模拟输入：模拟单台控制12.2.2.2 模拟输出：总操纵量或实际值12.2.2.2.1 模拟输出信号范围的定义12.3 CDIO的数字输入输出12.4 DIOP的数字输入输出12.4.1 DIOP：功能描述12.5 ISC现场总线机构12.5.1 如果构建总线通讯12.5.2 总线通讯的关闭12.6 调试解调器的机构12.7 主计算机操作机构12.7.1 MISO卡上的主计算机接口12.7.2 Profibus DP操作结构12.7.3 以太网接口的结构13校正程序13.1加料器参数13.2加料器参数功能解释13.2.1CP02－加料范围13.2.2CP04－欠载13.2.3CP03－最大输出量13.2.4CP05－过载13.2.5CP06－粗去皮13.2.6CP07－平均重量取数13.2.7CP08－总产量累计分值13.2.8CP09－最小速度13.2.9CP010－最大速度13.2.10CP11－控制偏差13.2.11CP12－报警停机滞后时间13.2.12CP13－联锁类型13.2.13CP14－实际值指示13.2.14CP15－杠杆臂值13.2.15CP16－料斗内容13.2.16CP17－最小补料料位13.2.17CP18－最大补料料位13.2.18CP19－Window/K1/滤波IDL/F, AED 13.2.19CP20－数字速度13.2.19.1标准速度监控13.2.19.2FlexWall-Plus加料器的运动监控13.2.19.3数字式速度取数13.2.19.4推荐输入13.2.20CP21－最大补料时间13.2.21CP22－补料优化13.2.22CP23－稳定时间13.2.23CP24－测样时间13.2.24CP25－防振（AV）切断时间13.2.25CP26－PID控制器接近时间13.2.26CP27－控制器自动化13.2.26.1控制器自动化13.2.26.2开机自动化13.2.26.2.1重复的开机自动化13.2.26.2.2总体开机自动化13.2.27CP28－滤波限制13.2.28CP29－实际值的接纳13.2.29CP30－总操纵量的接纳13.2.30CP31－体积控制（VR）实际值的接纳13.2.31CP32－开机滞后时间13.2.32CP33－称重桥（LWB）的长度13.2.33CP34－重量测试值（WTV）13.2.34CP35－摄取（AP）13.2.35CP36－自动去皮范围13.2.36CP37－无负载时间自动去皮13.2.37CP38－有比例的皮带速度13.2.38CP39－皮带长度13.2.39CP40－dead time way13.3附加参数13.3.1AP01－05 校正13.3.2AP11－可用的称重范围13.3.3AP12－drop out13.3.4AP13－速度模式13.3.5AP14－滑动影响13.3.6AP15－滑动值13.3.7AP16－速度接纳性13.3.8AP17－无负载时间13.3.9AP18－AT时间13.3.10AP19－驱动控制2最小13.3.11AP20－驱动控制2最大14硬件测试功能14.1F140：输入输出测试－外围（安装）14.2Kxx3：输入输出状态显示－外围14.3Kxx4：测试功能和模拟14.3.1模拟模式14.3.2输入输出测试（加料器）15名词解释附件11915.1技术数据15.2电磁兼容性15.3零配件清单15.4可能显示的模式清单15.5菜单页清单插图表图4-1：Congrav RC-4后部视图图4-2：Congrav RC-4后部视图（带ProfiBus模式）1 总介绍1.1手册的结构现有的操作手册包括：RC－4的：●技术操作和●RC－4 HGC软件（其版本请参见封页）按照下列顺序，每章独立描述一个完整的主题：●设备的描述●使用特性●硬件执行●硬件功能定义●操作●软件描述●参数描述和●结构例举1.2附加文件●ISC系统的描述●ISC-CM,ISC-FC和ISC-VC的技术手册●相应主计算机程序手册1.3操作手册所适用的人群操作手册适用于以下两组人群：●经过授权和培训过的专业技术人员来进行安装和其它电气工作。

GW国威时代录音系统客户关系管理的使用说明GW国威时代录音系统只在网络客户端具有客户关系管理功能，所以要使用相应客户关系管理功能，必须安装客户端软件。

GW国威时代录音系统的客户端软件和服务器端软件，可以同时安装在同一台机器上，双方之间互不影响。

客户关系管理包含客户资料信息增加和导入、客户资料信息管理、客户沟通信息管理和来电客户资料信息弹出等四个部分，下面详细叙述这四个部分。

一、客户资料信息增加和导入客户资料信息增加和导入功能模块，增加或导入客户资料信息，导入的源文件是Excel 格式的，且列的项目和排列顺序固定。

操作员可以先使用《客户资料信息管理》中的“导出列表记录”功能导出列的项目和排列排列信息。

客户资料信息增加和导入界面如下：二、客户资料信息管理客户资料信息管理模块包含客户资料信息的删除、修改、查询、清除和导出等功能。

从客户端登陆的操作员，其对客户资料信息的删除、修改、查询、清除和导出等操作，除了受操作员权限的限制外，还受操作员级别的限制。

下面详细叙述GW国威时代录音系统在客户资料信息管理方面的限制说明。

1、操作员权限的设置从客户端登陆的操作员，必须具有相应的权限，才能对客户资料信息进行删除、修改、查询、清除和导出等操作。

操作员的客户资料信息管理权限不可以修改，只能在增加操作员的时候，一次设定。

在菜单《操作员管理》的子菜单《增加删除操作员》里面的，对新增加的操作员，设置操作员的相关权限，如下图所示：2、客户资料信息管理的权限说明从客户端登陆的操作员，其对客户资料信息的管理功能，首先要具有客户信息资料管理、导入/删除客户资料信息的权限，除此之外，还有下述限制：1、如果操作员的级别是超级操作员，则该操作员可以对系统中的所有客户资料信息做删除、修改、查询、清除和导出等所有操作。

2、如果操作员的级别是组长操作员，且操作员具有“客户资料信息共享”权限，则该组长操作员的权限与超级操作员相同；否则，该组长操作员只可以对组别一致的操作员加入的客户资料信息做删除、修改、查询、清除和导出等操作。

ContentsOverview (2)Minimum System Requirements (4)Installation (4)Server Activation (16)SMTP Scanner, SMTP Proxy Mail Scanner (21)Creating a SMTP Scanner (21)OverviewThe GWAVA 4 Appliance is a complete software package for implementing the GWAVA 4 system and is designed to replace an existing GWAVA 4 server with a standalone GWAVA 4 system running an SMTP scanner for any mail system. The GWAVA 4 Appliance is ideal for a virtual machine environment.The GWAVA 4 Appliance is designed to run the SMTP scanner for any email system in the market. The SMTP scanner, and GWAVA 4 Appliance, are completely independent of any GroupWise system and can be implemented in any system. The SMTP scanner acts as a proxy for the SMTP Gateway of your mail system.The SMTP scanner and GWAVA appliance are meant to be placed in front of the current GWIA or SMTP Gateway for the mail system. Incoming email sent to your domain will first go to the GWAVA appliance, which scans then sends clean email to the GWIA or SMTP Gateway. Mail sent from your domain will pass through the normal system, but the SMTP Gateway will send the mail to the GWAVA appliance, which sends the email to the internet.InternetSMTP GatewayGWAVA 4Appliance SMTPScannerMTAPost OfficeUsersIf the GWAVA appliance is set behind a firewall, or multiple firewalls, the following ports should be open for mail flow and GWAVA functions or services:Inbound and general traffic53 – UDP (DNS lookups)25 – TCP Inbound (Used for Mail)The following should be open to access the GWAVA appliance from outside the network:49285 – TCP Inbound (QMS message release service)49282 – TCP Inbound (GWAVA Management Console)22 – TCP (SSH access. This can be a security concern, but may be necessary to enable for supportaccess.)Outbound traffic80 – TCP Outbound (Updates services for Antivirus, Signature Engine, and GWAVA system.)21 – FTP Outbound (OS updates)25 – TCP Outbound (Only if scanning outbound mail)123 – TCP Outbound (Network Time Protocol (NTP))Minimum System RequirementsFor a system which processes ~2,000 messages per hour:2.4 GHz Pentium 4 or equivalent processor1 GB RAM36 GB Hard Drive (entire drive will be formatted automatically).1 Network connectionFor a system which processes ~4,000 Messages per hour:3.2 GHz Pentium 4 or equivalent processor1.5 GB RAM40 GB Hard Drive (entire drive will be formatted automatically).1 Network connectionFor a system which processes ~8,000 messages per hour:3.6 GHz Pentium 4 or equivalent processor2 GB RAM60 GB Hard Drive (entire drive will be formatted automatically).1 Network connectionDownload/solutions/trial-downloads.htmlInstallationTo install the GWAVA 4 appliance, download the ISO and burn the image to a blank CD using your preferred CD burning program.Insert the GWAVA 4 Appliance CD into the CD or DVD drive of the target system and boot from the Appliance CD.On boot, you will be presented with the following menu.To install the Appliance, choose the install option.Allow the system to completely boot from the Appliance CD, and the installation willautomatically start.You will be warned that running the installationwill delete all data currently on the system. This isthe last chance you have to avoid formatting thedrive in this system.If you have several hard disks in the system,GWAVA4 will only install on the firstone,(/dev/hda or /dev/sda), and ignore others. To ensure you install to the correct drive, physically disconnect or remove all but the destination drivefrom the system before you boot.As soon as you select ‘OK’, the installation will begin.The setup does not require any user input until after the system reboots.On system reboot, select boot from hard disk, and the default SLES 10.2 kernel listed.The install will continue.Allow the automatic configuration to continue.Once the installation has completed, you will be asked to provide connection and security information for your new system.To complete the setup, all pertinent network information must be provided for your system. The defaults detected in parentheses will be set if you simply hit ‘enter’. To ch ange the setting, enter the appropriate value.Ensure that you have the ip address configured correctly, this is the only interface to set or change the network settings.After the settings have been entered, you are asked to verify that the following information is correct. Review the information and hit ‘y’ or ‘n’ and ‘enter’ to either re-enter the information or to continue.After you have set the network settings, they will be tested for connectivity.SSH allows remote console administration on port 22. This can be turned on and off later through the GWAVA appliance control web interface. When you permanently enable or disable the service, it is removed from the runlevel and will be enabled or disabled on system startup until the setting is changed.Next, is the time setup for the server. It is strongly recommended to setup the time on your system.Pick your location. The wizard will narrow the terms to display a manageable list of time zones for you to select from.Select your resident nation.Select the appropriate time zone.If you opt to specify a custom time zone, or do not find your time zone listed, you may choose the custom option: ‘none’.The time zone must be specified in Time Zone environment Variable. Syntax: <time zone name> <hours ahead of UTC> The time zone name does not matter, but the hour variable sets the time for the system.for example:MST-6…would be accurate for the Mountain Standard Time zone, U.S. and Canada. The time zone may be any name you like, as long as it conforms to Posix Time Zone format.After your custom time zone has been created, the information must be verified.A custom Network Time server may also be specified. If a custom time server is used, provide the DNS name or IP address of the NTP server. Default, (), is shown.After the time server is specified, the system attempts to connect and sync the time.Confirm the time settings for your system to continue.If you want to migrate an existing NetWare GWAVA4 Quarantine to the GWAVA Appliance, select ‘yes’here. The wizard uses ncpmount to pull the information over the network connection from the existing qms to the Appliance.You will be required to shut down the QMS system on the NetWare machine to complete the operation. This process can take several hours and should only be performed after-hours. If you wish to migrate QMS, this is the time to do so. Thought you may invoke the command later, you will have data loss unless the migration is completed during setup.For the final step, you are asked to set the root password for the system. This is the administrator password which will be required to log in to the system via ssh or through the console. DO NOT LOSE THIS PASSWORD.The Appliance is designed to provide all the necessary functions for GWAVA 4 inside the GWAVA 4 web administration, thereby removing all need for console level administration. While normal operation of the GWAVA 4 Appliance removes all need for console level administration, the root password may be required for support.GWAVA 4 appliance setup is now complete. All that remains is activating the GWAVA 4 server and creating a scanner of your choice.Server ActivationTo Activate your server, open a browser and enter the ip address or DNS name of the Appliance, with port 49282.http://<your_server_ip>:49282This is the connection address for the GWAVA 4 management console. When you first connect to the system, you should be taken to the setup page, shown below.The GWAVA Appliance is designed to replace existing GWAVA 4 servers, and as such it is recommended to setup the Appliance as a new GWAVA server.Select ‘Continue’.The following information is required.The server name should match the host name you set for the server. The connection address is the address that GWAVA 4 will use to serve the management console. Both the Server parameters should be left as default.The Administrator login name and password are required to connect to, and administer the GWAVA 4 management console. DO NOT LOSE THIS PASSWORD.The Internet domain is the domain that the GWAVA 4 server will filter mail for. This should be your company domain. (ie. )The administrator name and email address is the name and address which will appear on GWAVA 4 notifications and digests. Any responses to these messages will be sent to the Administrator’s e-mail address.The SMTP server address should be the address of your GWIA or SMTP gateway. If you are using an SMTP scanner, this will be the address which GWAVA 4 will forward the incoming mail to. GWAVA 4 also uses this address for GroupWise authentication for QMS authentication and access.The SMTP authorization name and password are not required for notifications, but are recommended. For GroupWise systems, this can be any username and password, and does not have to be an administrator. (ie. Username: bob Password: c751h )After you have provided the information, select ‘Continue’.You will be asked for confirmation. Clicking ‘Install’ will activate the GWAVA 4 server, and you will be required to login using the admin name and password you provided earlier. Click ‘back’ on your browser if you need to make any changes.When you click ‘Install’, wait for the activation process to complete. You should be redirected to the management login screen.Click on ‘Enter Management Console’ and provide the administrator username and password to login.Once you log in, your new GWAVA 4 server should display the following page.This page is the home page for the Management Console.To administer any necessary changes to the GWAVA 4 appliance, open the Appliance Control page found under Server/Scanner Management | <Server name> | Server Management, as shown below.The Appliance Control page allows you to control the basic functions of the server, and open SSH access if required.When an update is performed, GWAVA 4 must be restarted to complete the process. This can be achieved from this web console at the click of a button, as well as a full system restart or shutdown.Suspending mail flow, enabling or disabling SSH, and synchronizing the system time can all be performed from this page.The GWAVA 4 server is now installed and ready to be configured for your system.SMTP Scanner, SMTP Proxy Mail ScannerThe SMTP scanners are the most recent options to the GWAVA system, and allow the incoming and, or, outgoing mail to be intercepted, scanned, and filtered completely independent of the mail system. This setup has the distinct advantage of relieving the mail system of unnecessary and unwanted traffic, leaving mail system resources open to function with greater performance and security.The SMTP interfaces add a layer between the GWIA, or any other mail system’s SMTP sending agent, and the internet. Sending mail is forwarded through an SMTP proxy, which then sends the filtered, clean mail to the original recipient. Incoming mail is scanned via the SMTP scanner, which then sends the filtered and clean mail to your mail system, unaltered. These scanners allow GWAVA to act independently of your mail system.Creating a SMTP ScannerThe SMTP scanner will only work if your MX record points to the GWAVA SMTP interface for mail delivery, and if your domain and mail system SMTP are listed correctly in your GWAVA system.GWAVA SMTP will then forward the clean mail to the SMTP Gateway specified during server activation. To view or change the domain and SMTP for your Mail system, go toServer/Scanner Management | <Server Name> |Server Management | Configure Server.The Mail relay agent SMTP Server and Default domain MUST be Correct for your system. If you have multiple domains, list the additional domains. GWAVA will only accept mail for the listed domain(s).The Scanner creation wizards, (found under Server/Scanner Management | <Server name>| Wizards | Install/create new scanner), walk through the steps and information required to install the different scanners for your system. Select the SMTP Interface scanner and follow the instructions to install the scanner.To install a SMTP scanner, select the SMTP scanner option from the wizard and click next.The SMTP scanner creation wizard informs you of the information you must know to successfully create the scanner.The Scanner Name iswhatever you wish thescanner to be named in theGWAVA server.The IP listen address is theaddress of the GWAVAAppliance. This should alsobe listed on the MX recordfor your domain.Allowed relay addressesare the source addresseswhich are allowed to send mail through the GWAVA SMTP scanner. Your mail system SMTP address should be listed here, as well as any other mail sending source for your domain. Mail coming from these addresses will be treated as outbound mail. No source but these listed addresses will be allowed to send mail through the SMTP interface.The red ‘X’ removes listed address ranges and the blue ‘add…’ link provides an extra address/range box.IP Reputation and RBL drop at connection settings are recommended as default. This dumps any incoming message that fails these initial incoming tests, saving bandwidth and performance.RBLThe Real-time Blackhole List scanner searches the header of incoming message files to see if their source address is listed on an RBL. When enabled to drop on connection, a positive RBL event will cause the SMTP scanner to terminate the connection to the sending server for the offending message as soon as the event occurs. The RBL scanner utilizes real-time blackhole lists hosted on the servers listed under the RBL configuration page. RBL servers may be added or removed from the configuration. This is a strict pass or fail engine, and an offending ip address listed on the RBL will not be allowed to send mail to your system. Take time to verify that the RBL servers listed in the configuration are the desired list servers. The default list servers for RBL are, and .IP ReputationIP Reputation works much like the RBL scanner does, in that it uses a black list, but also has a white list for common mail sources. When used with the SMTP scanner, IP Reputation will also temporarily fail messages from sources not found on either list. The temporary fail will allow the sending SMTP gateway to retry, and it will eventually get through. This catches one-time spam bursts from sources not found on the black list, while enabling good mail to still be delivered to the system. The black and white lists are maintained and updated online, but are cached on the local machine as they are used.SPFSender Policy Framework can be used with the GWIA and SMTP scanners. Sender Policy Framework, (SPF) attempts to verify the sender of each email message, which can eliminate spoofed email and mostbackscatter attacks. For SPF to work correctly, the sending domain must have an updated SPF record set up in DNS. If the sending domain does not have a SPF record set in their DNS, then their mail will not be blocked. Setting up a correct SPF record will block messages from spammers who are pretending to be you, to your system.To use SPF on a GWIA scanner, you must correctly specify which line in the header of mail messages is to be used. If the mail system is using a relay or proxy which adds a line to the message, then you should set SPF to use the second line (2), otherwise, the line used should be set to one (1), which is the default.SPF is not enabled by default, but can be a powerful tool to keep spam from entering your system. Select your preferences, and click ‘Continue’.Set the default actions for viruses and spam. These settings can be changed after scanner creation. Click ‘Continue’.Review and confirm your settings. If you wish to make changes, use the ‘back’ button on your browser, correct the information, and continue.Click ‘Install’ to continue.Wait while the installation completes.Once installation is complete, refresh the Server/Scanner Management | <Server Name> | Manage scanners folder to view your new SMTP scanner.Your SMTP scanner is now created and ready to configure.As soon as the MX record pointing to the GWAVA SMTPis active, the SMTP scanner will begin filtering mail.。

操作手册 2004sitransLR 400安全指导须注意警告提示，以确保人身安全，保护产品及相关设备不受损坏。

这些警告提示均附带警告级别说明。

资质人员本设备/系统须根据此手册进行安装和运行。

根据已有安全惯例和标准，只有具备资质的人员有权进行安装和操作此设备。

警告：此产品只有在正确运输、储存、安装、装配、操作及维护的情况下才能正确和安全的工作。

注意：请根据说明书使用本产品。

MILLTRONICS ®是Siemens Milltronics Process Instruments Inc.的一个注册商标。

可通过下列地址联系 SMPI 技术出版部： Technical PublicationsSiemens Milltronics Process Instruments Inc. 1954 Technology Drive, P.O. Box 4225 Peterborough, Ontario, Canada, K9J 7B1 Email: techpubs@关于 SMPI 其它操作手册，可访问我们的网站： 。

© Siemens Milltronics Process Instruments Inc . 2004目录概要信息 (1)本手册 (1)SITRANS LR 400 (3)结构 (3)规格 (4)尺寸 (9)安装 (16)装配位置 (16)电气连接 (18)启动 (20)自检 (20)多列显示 (20)现场编程 (20)自动设置 (20)操作 (21)概要信息 (21)测量原理 (21)SITRANS LR 400的操作 (24)更改参数值 (25)编程禁止与允许 ............................................. ..... (27)操作实例 (28)参数(HART) (30)必需的参数 (30)附加参数 (32)参数 (PROFIBUS PA) (56)故障维修 (65)故障分类 (65)自检 (65)症状，原因及维修 ................................................................. .... . (65)故障消息 (66)维护 (68)断开电气连接 (68)清洗天线 (68)证书 (69)术语 (70)附录 I (71)参数表 ................................................... (71)附录II (74)编程表格 (74)附录III (77)环境/工作温度说明 (77)附录IV (78)过程压力/温度减额法 (78)附录V (80)SITRANS LR 400 HART 通信 (80)附录VI (85)SITRANS LR 400 PROFIBUS PA通信 (85)概要手册正确安装、操作及维护SITRANS LR 400雷达仪，请参考本手册。

目录1. 概述................................................................................................................................- 1 - 1.1 GW称重模块的定义 (1)1.2GW称重模块的容量 (1)1.3GW称重模块的组成 (1)1.4GW称重模块的特点 (2)2. GW模块的安装基础 (2)3. GW模块的安装 (3)3.1称重系统中模块的布置 (3)3.2注意事项 (4)4. GW模块的标定 (5)4.1砝码标定 (5)4.2 组合标定 (5)4.3替代物标定 (6)5. 维护和保养 (6)5.1概述 (6)5.2 现场检查 (6)5.3称重模块及接线盒检查 (6)6. 常见故障及排除 (6)6.1概述 (6)6.2判断故障 (7)6.3 GW模块中传感器的更换 (8)400t15t、20t、30t、50t、100t、200t、250t、梅特勒-托利多称重模块产品手册1.3.1 防倾覆螺栓和支撑板的作用GW称重模块中的防倾覆螺栓具有抵御上抬力和倾覆力的作用，支撑板能防止传感器在运输和安装过程中受力。

1.3.2 GW称重模块的自动复位系统GW称重模块既使在恶劣的工作环境里也能给出精确、稳定的称量，这得益于其自动复位功能。

模块的这个特点通过传感器的独特设计来实现，初始时传感器和承压头处于竖直的位置，当顶板受到水平冲击力时，传感器及承压头会偏离原先的位置，传感器的独特设计会使之产生一回复力，回复到原来的位置，保持竖直。

1.3.3 侧向限位的作用当秤台受到水平冲击力时，称重模块中的侧向限位可以抵抗水平冲击力，限制其移动。

侧向限位还能够方便地调整传感器的垂直度和更换传感器。

1.4 MTCN称重模块的特点MTCN称重模块一个突出的特点在于其简单合理的设计：1、采用不锈钢材料，能有效抵御腐蚀性物质侵蚀。

0 1 0 10 1 0 10 1 0 10 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 00 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 10 1 0 1 0 1 0 10 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 0 1 0 1 0Gefran Softwarepreventive maintenance alarms• Closed loop for Melt pressure and control of roller tension• Management of motors in synch• Recipes for work parameters and machine parameters • Confi gurable trends of process variables • Exportable historical fi les• Weekly programmer for programmed on/off• Scalability of application on many hardware architectures • Tested solutions based on Gefran Hardware/SoftwareProfi leGF_PACK EXTRUSION is Gefran’s solution for complete control of extruders and extrusion lines.GF_PACK EXTRUSION is supplied as preinstalled software on Gefran HW, within which Gefran has inserted a series of preconfi gured functions.GF_PACK EXTRUSION consists of standard hardware and software modules:• Operator interface with terminals and Gefran Industrial PCs, 6.5”, 10.4”, 12.1” and 15” colour monitors and touch screen • Gefran GILOGIK II I/O modules with digital and analogue inputs and outputs and temperature sensors • Temperature control modules, Gefran Geflex single loop and multiloop, with on-board SSRs • Application software preconfigured and preloaded on operator interfaceGF_PACK EXTRUSION contains all typical functions for managing an extruder and an extrusion line.gf_pack extrusion2Functions» Thermoregulation• Max 96 configurable temperature control zones• Division of temperature control zones into groups• Parameterisation and configuration of temperature control loop from dedicated application pages• Distributed temperature control with Geflex controllers• Centralized temperature control with GILOGIK II (R-TC8 modules)• Pages with trend graphics on all enabled temperature zones, with acquired setpoint/value trend» Motors control and management• Up to 16 preconfigured motors (extrusion, hopper, mixer, vacuum pump, drag, cut, auxiliary)• Dedicated pages for motors Start/Stop, with status feedback, from operator panel• Preconfigured synchronism function activated from operator panel• Automatic management of gear ratio for motors enabled for synchronism • Dedicated pages for scaling analogue input and output values• Pages with trend graphics for all acquired analogue variables• Configuration of up to 4 setpoints on analogue input• Up to 4 closed loops for speed controlAs default, machine movement control signals are managed with analogue values (-10 / +10 Vdc).For use of drives in Fieldbus (CANopen) connection, reference values can be managed with read/write on the bus.» Other functionalityIn addition to machine control functions, the packet offers:• Recipe management (exportable via USB port)• Printing of configurable parameters and pages• Videocamera via Ethernet (Netcam) for real time remote control of system “hot points”• Tele-assistance via modem and Internet• Complete diagnostics of hardware (PLC) with function state and information on version of configured I/O modules• Multilanguages management with UNICODE support (Italian, English, French, German, Chinese, etc.)• Password level management for access to pages or change of data items • Easy access to system from local and remote by Ethernet (centralisation, diagnostics, upgrade)• Availability of a user setting log• Quality control of defined parameters• Programmed system autostart• Counters for managing maintenance of significant data, configurable runtimesgf_pack extrusion The following diagram shows a film extrusion line, highlighting its main functions with specific reference to use of devices in the Gefran catalogue.3gf_pack extrusion4SupplyGF_PACK EXTRUSION is uspplied on a DVD, with which you can install the data and information needed to programme an extrusion line.The installation DVD contains the following:• User manual with information on functions and operation of pages used to manage an extrusion line• Configuration manual with information on source software structure and instructions for possible changes. A list of available data/variables and of standard functions is included• General electrical diagram for connecting the operator panel, I/Os and possible connection in case of distributed temperature control• Graphic utility for guided configuration of structure for passage to various application pages. The utility is also used to configure access levels for page call To programme and implement special functions, the development PC requires the configuration tools contained in Gefran Automation Builder (G.A.B.).By using the programming languages you can change the standard functions contained in GF_PACK EXTRUSION to adapt them to specific machine needs.The information and data on the DVD are subject to a user license that is inserted with the supply.GF_PACK EXTRUSION is available in various configurations according to the type and complexity of the application:EXTRULABO• Application software packet for small/medium extruders• Dynamic pages configurable for up to 16 temperature control zones, up to 3 motors in synch, 1 fast control loopEXTRUCOMP• Application software packet for estruders• Dynamic pages configurable for up to 24 temperature control zones, up to 10 motors in synch, 1 fast control loopEXTRUPIPE• Application software packet for extruder lines• Dynamic pages configurable for up to 48 temperature control zones, up to 16 motors in synch, up to 4 fast control loopsThe various confi gurations (EXTRULABO, EXTRUCOMP and EXTRUPIPE) are matched with one of the terminals of the GF_VEDO ML, GF_VEDO HL or DIGISTAR II series equipped with the VxWorks operating system.The selected terminal is supplied with the OS and selected operative packed preinstalled.gf_pack extrusion5 Technical DataThe automation architecture required for the GF_PACK EXTRUSION solution calls for:Operator interface based on the following terminals of the GF_VEDO ML seriesOperator interface based on the following terminals of the GF_VEDO HL seriesModel GF_VEDO ML 65GF_VEDO ML 104GF_VEDO ML 121GF_VEDO ML 150Type262K TFT colorsDimension 6.5”10.4”12.1”15”ResolutionVGA(640x480)SVGA(800x600)SVGA(800x600)XGA(1024x768) Processor Type Geode LX900 / Frequency 600MHz / Core x86Standard2 x Ethernet 10/100 Mbps4 x USB 2.0 Host1 x RS4852 x PS21 x TF keyboardModel GF_VEDO HL 121GF_VEDO HL 150Type262K TFT colorsDimension12.1”15”ResolutionSVGA(800x600)XGA(1024x768) Processor Type Intel Pentium Celeron - Intel Celeron Mobile / Frequency 600 - 1500MHzStandard2 x Ethernet 10/100 Mbps2 x USB 1.1 Host1 x RS4852 x PS21 x TF keyboardgf_pack extrusion6Geflex controllersModel GFX GFXTERMO4GFX4Characteristics1 channel (hot/cold)Solid state relay embedded DIN rail mounting 4 channels (hot/cold)Solid state relay command DIN rail mounting 4 channels (hot/cold)Solid state relay embedded DIN rail mountingGILOGIK II series remote I/O modules with GDNet (Ethernet) connection to operator interfaceCodeR-E16R-U16R-EU16R-A/D8R-D/A4R-D/A8R-MA6R-TC8R-C3Characteristics,Channels number 24Vdc PNP digital inputs 16824Vdc 2APNP digital outputs 16816mA, V analog inputs,potentiometer , strain gauge (16bit)86mA, V analog outputs (16bit)4 - 86Temperature inputs (18bit) (J, K)8Counter inputs1(5KHz)3 (250KHz)All Input / Output signals are optically isolated.gf_pack extrusion7Distributed solutionGF_VEDOGEFLEXGILOGIK IIModbus RS485Centralized control using R-TC8 modules in the GILOGIK II series, with GDNet (Ethernet) connection to operator interface.Centralized solutionGF_VEDOGILOGIK IIR-TC8 temperature controlDistributed control using Gefl ex controllers, with serial Modbus connection to operator interface.GEFRAN spa Via Sebina, 7425050 Provaglio d’Iseo (BS) - ItalyPh. +39 030 9888.1 - Fax +39 030 9839063Email:*******************:gf_pack extrusionOrder codePRECONFIGURED SOLUTIONSF039561EXTRULABOApplication software package for small/medium extruders. Dynamically confi gurable up to 16 temperature control loops, up to 3 motor control loops with synchronization and 1 fast closed control loop.F039562EXTRUCOMPStandard application software package for extruders. Dynamically confi gurable up to 24 temperature control loops, up to 10 motor control loops with synchronization and 1 fast closed control loop.F039563EXTRUPIPEApplication software package for complete extrusion lines. Dynamically confi gurable up to 48 temperature control loops, up to 16 motor control loops with synchronization and 4 fast closed control loops.SOLUTIONS FOR SYSTEM INTEGRATORSF039564EXTRUSYSOpen application software package for complete extrusion lines. Dynamically confi gurable up to 96 temperature control loops, up to 30 motor control loops with synchronization and 10 fast closed control loops. Includes SEVEN programming environment for PLC and HMI, and a 3 days technical training in our laboratories in Provaglio d’Iseo (Italy). (travel and lodgings expenses excluded).DTS_GF_PACK-EXTRUSION_1209_ENGNote:The EXTRULABO, EXTRUCOMP, EXTRUPIPE, packages must be ordered together with a DIGISTAR II series industrial PC with VxWorks O.S.。

产品手册PRODUCT CA TALOGV1.0 ，2009/11产品手册目录CONTENTS1.GW-PR-9902T汽车牌照识别器 (5)1.1 产品简介 (5)1.2 权威检测 (5)1.3 产品特点 (5)1.4 主要功能 (5)1.5 应用领域 (6)1.6 解决方案 (6)1.6.1标清独立处理单元车牌识别方案 (7)1.6.1.1 主要特性 (8)1.6.1.2 订货型号 (8)1.6.1.3 硬件接口 (8)1.6.1.4 技术参数 (8)1.6.1.5 应用场合 (9)1.6.1.6 应用举例-高速公路收费系统 (9)1.6.1.6.1 方案特点 (9)1.6.1.6.2 系统框图 (10)1.6.1.6.3 设备清单 (10)1.6.2标清板卡处理单元车牌识别方案 (11)1.6.2.1 主要特性 (11)1.6.2.2 订货型号 (11)1.6.2.3 硬件接口 (11)1.6.2.4 技术参数 (11)1.6.2.5 应用场合 (12)1.6.2.6 应用举例-高速公路收费系统 (12)1.6.2.6.1 方案特点 (12)1.6.2.6.2 系统框图 (13)1.6.2.6.3 设备清单 (13)1.6.3标清独立处理单元LED补光车牌识别方案 (14)1.6.3.1 主要特性 (14)1.6.3.2 订货型号 (14)1.6.3.3 硬件接口 (14)1.6.3.4 技术参数 (14)1.6.3.5 应用场合 (15)1.6.3.6 应用举例-高速公路收费系统 (16)1.6.3.6.1 方案特点 (16)1.6.3.6.2 系统框图 (16)1.6.3.6.3 设备清单 (16)1.6.4标清板卡处理单元LED补光车牌识别方案 (17)1.6.4.1 主要特性 (17)1.6.4.2 订货型号 (17)1.6.4.3 硬件接口 (17)1.6.4.4 技术参数 (18)1.6.4.5 应用场合 (19)1.6.4.6 应用举例-高速公路收费系统 (19)1.6.4.6.1 方案特点 (19)1.6.4.6.2 系统框图 (20)1.6.4.6.3 设备清单 (20)1.6.5标清独立处理单元双摄像头车牌识别方案 (20)1.6.5.1 主要特性 (21)1.6.5.2 订货型号 (21)1.6.5.3 硬件接口 (21)1.6.5.4 技术参数 (21)1.6.5.5 应用场合 (22)1.6.5.6 应用举例-高速公路收费系统 (23)1.6.5.6.1 方案特点 (23)1.6.5.6.2 系统框图 (24)1.6.5.6.3 设备清单 (24)1.6.6标清板卡处理单元双摄像头车牌识别方案 (25)1.6.6.1 主要特性 (25)1.6.6.2 订货型号 (25)1.6.6.3 硬件接口 (25)1.6.6.4 技术参数 (25)1.6.6.5 应用场合 (26)1.6.6.6 应用举例-高速公路收费系统 (26)1.6.6.6.1 方案特点 (26)1.6.6.6.2 系统框图 (27)1.6.6.6.3 设备清单 (27)1.6.7高清车牌识别方案 (28)1.6.7.1 主要特性 (28)1.6.7.2 订货型号 (28)1.6.7.3 硬件接口 (28)1.6.7.4 技术参数 (29)1.6.7.5 应用场合 (30)1.6.7.6 应用举例-高速公路收费系统 (30)1.6.7.6.1 方案特点 (30)1.6.7.6.2 系统框图 (31)1.6.7.6.3 设备清单 (31)1.6.8高清LED补光车牌识别方案 (32)1.6.8.1 主要特性 (32)1.6.8.2 订货型号 (32)1.6.8.3 硬件接口 (32)1.6.8.4 技术参数 (33)1.6.8.5 应用场合 (34)1.6.8.6 应用举例-高速公路收费系统 (34)1.6.8.6.1 方案特点 (34)1.6.8.6.2 系统框图 (35)1.6.8.6.3 设备清单 (35)1.6.9 高清含终端服务器车牌识别方案 (36)1.6.9.1 主要特性 (36)1.6.9.2 订货型号 (36)1.6.9.3 硬件接口 (37)1.6.9.4 技术参数 (37)1.6.9.5 应用场合 (39)1.6.9.6 应用举例-治安查报站系统 (39)1.6.9.6.1 方案特点 (39)1.6.9.6.2 系统框图 (40)1.6.9.6.3 设备清单 (40)1.6.10高清含终端服务器LED补光车牌识别方案 (41)1.6.10.1 主要特性 (41)1.6.10.2 订货型号 (42)1.6.10.3 硬件接口 (42)1.6.10.4 技术参数 (42)1.6.10.5 应用场合 (44)1.6.10.6 应用举例-治安查报站系统 (44)1.6.10.6.1 方案特点 (44)1.6.10.6.2 系统框图 (45)1.6.10.6.3 设备清单 (45)2. GDW-VM-2003车辆智能监测记录系统 (46)2.1 产品简介 (46)2.2 权威检测 (46)2.3 产品特点 (47)2.4 设备功能 (47)2.5 应用领域 (47)2.6 解决方案 (48)2.6.1标清卡口方案 (49)2.6.1.1 主要特性 (49)2.6.1.2 订货型号 (49)2.6.1.3 硬件接口 (49)2.6.1.4 技术参数 (49)2.6.1.5 应用场合 (50)2.6.1.6 应用举例-治安卡口系统 (51)2.6.1.6.1 方案特点 (51)2.6.1.6.2 系统框图 (51)2.6.1.6.3 设备清单 (51)2.6.2标清硬盘录像一体卡口方案(预告) (56)2.6.2.1 主要特性 (56)2.6.2.2 订货型号 (56)2.6.2.3 硬件接口 (56)2.6.2.4 技术参数 (56)2.6.2.5 应用场合 (57)2.6.3高清卡口SIC1G方案 (58)2.6.3.1 主要特性 (58)2.6.3.2 订货型号 (58)2.6.3.3 硬件接口 (59)2.6.3.4 技术参数 (59)2.6.3.5 应用场合 (61)2.6.3.6 应用举例-治安卡口系统 (61)2.6.3.6.1 方案特点 (61)2.6.3.6.2 系统框图 (62)2.6.3.6.3 设备清单 (62)2.6.4高清LED补光卡口方案 (63)2.6.4.1 主要特性 (63)2.6.4.2 订货型号 (64)2.6.4.3 硬件接口 (64)2.6.4.4 技术参数 (64)2.6.4.5 应用场合 (66)2.6.4.6 应用举例-治安卡口系统 (67)2.6.4.6.1 方案特点 (67)2.6.4.6.2 系统框图 (68)2.6.4.6.3 设备清单 (68)2.6.5高清卡口(不含终端服务器)方案 (69)2.6.5.1 主要特性 (69)2.6.5.2 订货型号 (69)2.6.5.3 硬件接口 (70)2.6.5.4 技术参数 (70)2.6.5.5 应用场合 (71)2.6.5.6 应用举例-ETC收费系统 (72)2.6.5.6.1 方案特点 (72)2.6.5.6.2 系统框图 (73)2.6.5.6.3 设备清单 (73)2.6.6高清LED补光卡口(不含终端服务器)方案 (74)2.6.6.1 主要特性 (74)2.6.6.2 订货型号 (74)2.6.6.3 硬件接口 (74)2.6.6.4 技术参数 (75)2.6.6.5 应用场合 (76)2.6.6.6 应用举例-超速预警提醒系统 (77)2.6.6.6.1 方案特点 (77)2.6.6.6.2 系统框图 (78)2.6.6.6.3 设备清单 (78)高德威产品手册1.GW-PR-9902T汽车牌照识别器1.1 产品简介GW-PR-9902T汽车牌照识别器系列产品，采用先进的数字图像处理和模式识别技术，基于嵌入式的硬件处理平台和包含智能补光技术的专用成像系统，可实现车辆牌照的自动识别及图像抓拍。