MAAMML0019中文资料

e-mail:**************For latest product manuals: Shop online at User’s GuideOM-DAQXLMulti-Channel Universal InputTouch Screen Data Logger***********************Servicing North America:U.S.A.:O mega Engineering, Inc.,800 Connecticut AveNorwalk, CT 06854Toll-Free: 1-800-826-6342 (USA & Canada only)Customer Service: 1-800-622-2378 (USA & Canada only)Engineering Service: 1-800-872-9436 (USA & Canada only)Tel: (203) 359-1660 Fax: (203) 359-7700e-mail:**************For Other Locations Visit /worldwideThe information contained in this document is believed to be correct, but OMEGA accepts no liability for any errors it contains, and reserves the right to alter specifications without notice.Section P age Section 1 - Introduction ....................................................................... 1-1 Section 2 - Hardware .......................................................................... 2-12.1 Included Items ....................................................................................................... 2-12.2 Views and Descriptions ...................................................................................... 2-2Section 3 - Sensor Wiring ..................................................................... 3-13.1 User Interface Flowchart .................................................................................... 3-23.2 Home Toolbar ........................................................................................................ 3-43.3 Add Channels ....................................................................................................... 3-53.4 Communication Setting ........................................................................................3-7Section 4 - Specifications ...................................................................... 4-14.1 General .................................................................................................................... 4-14.2 Inputs ...................................................................................................................... 4-24.3 Functions ............................................................................................................... 4-34.4 Communication .................................................................................................... 4-44.5 External I/O ........................................................................................................... 4-44.6 Dimensions ........................................................................................................... 4-5i1 IntroductionThank you for purchasing our OM-DAQXL Multi-channel touch screen datalogger.This Quick Start guide briefly describes the key operations and provides setupexamples of the OM-DAQXL so that you can quickly operate the device for thefirst time.In addition to this quick start manual, the complete User manual can bedownloaded from Omega’s website (/manuals/) . TheUser manual provides detailed information regarding all of the functions andoperations of the OM-DAQXL. Use it together with this Quick Start Manual.1-12-1After reading this manual, keep it in an easily accessible place for later reference.2 Hardware2.1 Included ItemsThe following items are supplied in the box:13Table 2-1 OM-DAQXL Included Items* Specifies the country code.HOME BUTTONFigure 2-2 OM-DAQXL Front ViewTMTable 2-2 Status LED States2-23-1what was ordered.Note: For bridge type sensors, only channels 1, 2, 3, 4, and 9, 10, 11, 12 are available.Figure 3-2 Alarm Terminal BlockTable 3-4 Alarm Terminal Block SignalsTable 3-2 Three and Four Wire Sensor ConnectionsTable 3-3 Digital I/O Cable Pinout.Figure 3-1 Digital I/O Connector Pin NumbersFigure 3-3 Menu Flowchart3-23-3NOTE: For initial login use the default account with user name and password: omega, omega. This is an administrator account allowing additional users to becreated.Home ScreenForgot PasswordLogin WindowGuest loginFigure 3-4 Menu FlowchartFigure 3-5 Home T oolbar3.1 User Interface Flowchart3.2 Home Toolbar1. T ools Button - Extends or retracts the toolbar with each tap. When thetoolbar is retracted there is additional channel information displayed inthe toolbar area.2. L og Data - The log data button is used to change the logging state of thedata logger. Depending upon the current state this button will appearwhite (free running), red (logging) or orange (armed).3. A nnotate – The annotate button freezes the current display and allowsthe user the ability to make annotations on the display using the stylus. Ascreenshot will then be saved showing the annotation.4. S creen Shot – Takes a screenshot of the current display and saves it to thememory location specified in the data session settings.5. V iews – Invokes a fly-out menu list with selections for the 4 different viewmodes as well as a selection for toggling the slide show feature.6. D isplay Channels – Invokes a fly-out menu list with selections for thefour channel groups as well as selection to bring the user to the channelgroup channel selection screen.7. A dd Channel – Opens the add channel screen with the next availablechannel selected for configuration.8. C hannel List - Opens the channel list screen which lists all the currentlyconfigured channels.9. S tored Files – Opens the stored files screen to perform various operationson files in stored in memory.10. S ettings – Invokes a fly-out menu list with selections for trigger, alarm,and data session and device settings. Each selection opens a screenwhere settings related to that function can be set and saved.11. H elp – Opens a context sensitive help screen which will display contentappropriate to the current screen. This button is present in all of thevarious UI screens.3-43.3 Add ChannelsChannel settings can be configured for new channels using the Input Typeand Data Ranges screens. To add a new input channel and configure itssettings, hit the Add Channel button on the toolbar to navigate to the InputType screen. There are two types of channels which can be configured,physical input channels and virtual math channels. Depending on the type ofchannel being configured, the Input Type screen will have different settingsavailable. The toolbar appears as shown below when adding channels.Input Setup – Physical Input ChannelThe Input Type screen is used to configure the basic settings for an inputchannel. For physical input channels the input type selected will determinethe settings available.Temperature InputsFor temperature input types the Input Type screen will appear as shownbelow.Figure 3-6 Input Type - T emperature1. C hannel Type ButtonThe channel type selects between physical and math channel input types.Temperature inputs are physical input channels.2. I nput Type SettingsFor temperature inputs there are multiple sensor types available. Theseinclude thermocouple, RTD and thermistor. Each of these sensor typeshave additional sensor sub types available. The sub type drop-downlist will populate with the appropriate subtypes for each sensor type. Achannel number, color and name must be assigned for each channel.3. C hannel MapThe channel map provides a quick view of which channels have alreadybeen configured (blue) and the currently selected channel (orange). Sometemperature input types require the use of two input channels.The Data Ranges screen appears the same for all temperature input types. Depending on the sensor type selected the fixed values shown for the input and display range will vary.Figure 3-7 Data Ranges - T emperature1. Engineering UnitsThe two drop downs allow selection of various engineering units for display. 2. I nput RangeThe input range boxes show the full measureable input of the data logger for the sensor type being configured. These are not editable. 3. D isplay RangeThe display range boxes show the full display range available on the data logger. The graph range can be any subset of this range. This range is fixed for all temperature inputs. 4. Z ero AdjustThe zero adjust provides a user configurable offset adjustment, inengineering units, which will be applied to measurements across the full range of input. 5. M oving Average FilterThis setting provides the option to average an individual channels input samples. 6. G raph RangeThe graph range is the y-axis range that will be shown on the waveform view of the data logger. This can be any subset of the display range and is defined in the assigned engineering units. It can also be adjusted on the waveform view. 7. D ecimal PlacesSelects the number of decimal places to display.Figure 3-38 Comm Settings – Ethernet1.Connection SelectionThis button is used to select the network adapter. The settings for the currently selected network adapter will be shown below. 2.DHCPThis checkbox is used to enable or disable DHCP for the currently selected network adapter. DHCP Dynamic Host Configuration Protocol (DHCP) is a client/server protocol that automatically provides an Internet Protocol (IP) host with its IP address and other related configuration information such as the subnet mask and default gateway. 3.IP AddressIf DHCP is checked the DHCP assigned IP address is shown for the selected adapter. If DHCP is not checked, a static IP address can be entered using the keypad.4.Subnet MaskIf DHCP is checked the DHCP assigned subnet mask is shown for the selected adapter. If DHCP is not checked, a subnet mask can be entered using the keypad. 5.Gateway6.If DHCP is checked the DHCP assigned gateway IP is shown for the selectedadapter. If DHCP is not checked, a gateway IP can be entered using the keypad. 7.Update 1534623.4 Communication Settings (if applicable)If you purchased a -EW data logger, your tool bar will have a communicationssettings button. The Comm settings screen is where you can configure the Ethernet or optional Wi-Fi communication settings6.6. UpdateAfter configuring the settings, hit the update button to apply the settings to the selected network adapter.3-8Figure 3-39 Comm Settings - WiFi7.SSID – Select NetworkThis dropdown selection will show all of the WiFi networks within range.8.Security KeyEnter the passphrase or security key for the selected network. If it is an open network, leave this field blank. 9.ConnectHit the connect button to connect to the selected network.3-9Wi-Fi Wi-Fi networks within range.4 Specifications4.1 GeneralDisplay: 7.0" TFT color LCD (WVGA: 800 x 480 pixels) with chemicallyhardened touch panel.Internal Memory: 1 GB FLASH MemorySD Memory Card: 32 GBUSB Flash Drive: 1GBEthernet**: 10/100 Base-T, TCP/IPUSB Wi-Fi Dongle**: 802.11 b/g/n, USB#2.0 interface, Up to 150#Mbps, WEPand WPA/WPA2 encryption schemesOperating Environment: 0 to 50°C (32 to 122°F), 0 to 95% RH non-condensingStorage Conditions: -10 to 60°C (32 to 140°F)DimensionsWith Rubber Boot: (9.00 X 6.5 X 3.5")Without Rubber Boot: (8.75 X 5.75 X 2.42")Weight: 3.2 lbs (1.45 kg)*Power Supply: AC Adapter Input:100 to 240 Vac, 50 to 60 Hz, 1.5 A maxAC Adapter Output: 12 Vdc, 5A maxBattery: Lithium Ion Rechargeable (7.2 V, 4800 mAh)Battery Life: Approximately 4-8 hours depending on display settings beforerechargeScreen Time Out: 30 sec, 1 min, 2 min, 5 min, 10 min, NeverSlide Show Timing: 5 sec, 10 sec, 15 sec, 20 sec, 30 secAuto Power Shut Down: 5 minutes after screen time outLine Graph Time Scale: From 400 msec/div up to 1 hr/divExternal Excitation Output: 24 Vdc, regulated (±2%) isolated.Maximum current output 50 mAExternal I/O: 4 digital inputs, 4 digital outputs, 4 alarm outputs,1 external trigger input.*Includes battery and rubber boot**Only available for -EW modelsNumber of Analog Inputs: 8 or 16Sampling RateM aximum Sampling Rate per Number of Channels (Analog and Digital):1 Channel: 125 s/sec2 Channels: 50 s/sec4 Channels: 25 s/sec8 Channels: 10 s/sec16 Channels: 5 s/secLogging RateM aximum logging Rate per Number of Channels (Analog and Digital):1 Channel: 125 s/sec2 Channels: 50 s/sec4 Channels: 25 s/sec8 Channels: 10 s/secMeasurement Accuracy*At room temperature after 30 minute warm up period.Input Type: Thermocouple, RTD, Thermistor, Voltage, Current, Strain GageStrain Gage Input: Only Channels 1, 2, 3, 4, 9, 10, 11, 12 are available.Frequency Update Rate: 250 msecDigital Input and Functions: Frequency, volumetric flow rate, totalization,resettable counterVirtual Math Channels 1 to 16: Math equation of any two physical channelsFilter:•Per channel selectable moving average filter: None, 2, 5, 10, 20 or 50samplesResolution: One to four decimal places depending on the Input typeStatistics: Peak to peak, average, minimum, maximum, RMSInput Sampling/Logging Rate: 125 s/sec (1 Channel), 50 s/sec (2 Channels),25 s/sec (4 Channels), 10 s/sec (8 Channels), 5 s/sec, 1 s/sec, 12 s/min,6 s/min, 2 s/min, 1 s/min, 12 s/hr, 6 s/hr, 2 s/hr, 1 s/hr (For All Channels)Logging Mode: Interval, averageTrigger Conditions (Start & Stop): Timer, date and time, weekday and time,alarm output, external triggerLogging Condition: On command or trigger condition4.3 FunctionsDisplayViews: Waveform, waveform and table, table only, digital, slide showDisplay Channels: 4 channels per group – 4 groupsStored Files: Screen capture and log (internal, SD card, USB drive)D ata Review: Up to any 4 channels – scroll or page right and left, zoom in,zoom out, annotateDevice Settings:• General – Set current Time & Date• D isplay Option – Screen Timeout, Background & Grid color, Brightness,Slide show timing, Key sound, Calibrate Touch screen• D iagnostics – Analog, Digital, Power shut down test & generate report• U ser Management – Admin, Normal User (Set User ID & Password)• A bout – Firmware UpgradeHelp:• Help screen for every menu screenVirtual Math Channels: Up to 16 virtual channels can be created.Statistics: Peak to Peak, Average, Minimum, Maximum, RMSTriggersTrigger Types:• Start, Stop, RepeatTrigger Conditions:• Timer, Date & Time, Weekday & Time, Alarm Output, External TriggerLoggingLogging Modes:• Interval, AverageLogging Conditions:• On demand or trigger conditionDigital input functions:Frequency, Volumetric flow, Totalization, Resettable counter4.4 CommunicationProtocol: Modbus TCP/IP4.5 External I/O:Alarm Outputs: 4 open collector alarm outputs rated for 0.5A @ 30 Vdc withaudible alarm buzzerDigital Outputs: 4 open collector digital outputs rated to 30 mA @ 5 Vdclogically tied to alarm outputsDigital Inputs: 4 Schmitt trigger based inputs• 0 to 24 Vdc single ended, grounded input range• Logic high threshold 2.5 V; Logic low threshold 1.5 V• Contact closure detection• Maximum input frequency: 250 kHzPower Input to Digital I/O Isolation: 1.5 kVrmsAlarm Condition: High, Low, Window In, Window Out, Open SensorOn Alarm Event: Map to 4 Alarm outputs, Sound Buzzer, Take Screen shotAlarm Type: Latch, Non-LatchAlarm per Channel: TwoDimensions: mm (inch)Note: Ethernet port is only presenton -EW models.222 (8.75)M4 INSERT SCREW146(5.75)WARRANTY/DISCLAIMEROMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a period of 13 months from date of purchase. OMEGA’s WARRANTY adds an additional one (1) month grace period to the normal one (1) year product warranty to cover handling and shipping time. This ensures that OMEGA’s customers receive maximum coverage on each product.If the unit malfunctions, it must be returned to the factory for evaluation. OMEGA’s Customer Service Department will issue an Authorized Return (AR) number immediately upon phone or written request. Upon examination by OMEGA, if the unit is found to be defective, it will be repaired or replaced at no charge. OMEGA’s WARRANT Y does not apply to defects resulting from any action of the purchaser, including but not limited to mishandling, improper interfacing, operation outside of design limits, improper repair, or unauthorized modification. T his WARRANT Y is VOID if the unit shows evidence of having been tampered with or shows evidence of having been damaged as a result of excessive corrosion; or current, heat, moisture or vibration; improper specification; misapplication; misuse or other operating conditions outside of OMEGA’s control. Components in which wear is not warranted, include but are not limited to contact points, fuses, and triacs.OMEGA is pleased to offer suggestions on the use of its various products. However, OMEGA neither assumes responsibility for any omissions or errors nor assumes liability for any damages that result from the use of its products in accordance with information provided by OMEGA, either verbal or written. OMEGA warrants only that the parts manufactured by the company will be as specified and free of defects. OMEGA MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT OF TITLE, AND ALL IMPLIED W ARRANTIES INCLUDING ANY W ARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. LIMITATION OF LIABILITY: The remedies of purchaser set forth herein are exclusive, and the total liability of OMEGA with respect to this order, whether based on contract, warranty, negligence, indemnification, strict liability or otherwise, shall not exceed the purchase price of the component upon which liability is based. In no event shall OMEGA be liable for consequential, incidental or special damages.CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1) as a “Basic Component” under 10 CFR 21 (NRC), used in or with any nuclear installation or activity; or (2) in medical applications or used on humans. Should any Product(s) be used in or with any nuclear installation or activity, medical application, used on humans, or misused in any way, OMEGA assumes no responsibility as set forth in our basic WARRANTY /DISCLAIMER language, and, additionally, purchaser will indemnify OMEGA and hold OMEGA harmless from any liability or damage whatsoever arising out of the use of the Product(s) in such a manner.OMEGA’s policy is to make running changes, not model changes, whenever an improvement is possible. This affords our customers the latest in technology and engineering.OMEGA is a trademark of OMEGA ENGINEERING, INC.© Copyright 2017 OMEGA ENGINEERING, INC. All rights reserved. T his document may not be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form, in whole or in part, without the prior written consent of OMEGA ENGINEERING, INC.FOR WARRANTY RETURNS, please have the following information available BEFORE contacting OMEGA:1. P urchase Order number under which the product was PURCHASED,2. M odel and serial number of the product under warranty, and3. Repair instructions and/or specific problems relative to the product.FOR NON-WARRANTY REPAIRS, consult OMEGA for current repair charges. Have the following information available BEFORE contacting OMEGA:1. Purchase Order number to cover the COST of the repair,2. Model and serial number of the product, and 3. Repair instructions and/or specific problems relative to the product.RETURN REQUESTS/INQUIRIESDirect all warranty and repair requests/inquiries to the OMEGA Customer Service Department. BEFORE RET URNING ANY PRODUCT (S) T O OMEGA, PURCHASER MUST OBT AIN AN AUT HORIZED RET URN (AR) NUMBER FROM OMEGA’S CUST OMER SERVICE DEPART MENT (IN ORDER T O AVOID PROCESSING DELAYS). The assigned AR number should then be marked on the outside of the return package and on any correspondence.The purchaser is responsible for shipping charges, freight, insurance and proper packaging to prevent breakage in transit.Where Do I Find Everything I Need for Process Measurement and Control?OMEGA…Of Course!Shop online at TEMPERATUREM U Thermocouple, RTD & Thermistor Probes, Connectors, Panels & AssembliesM U Wire: Thermocouple, RTD & ThermistorM U Calibrators & Ice Point ReferencesM U Recorders, Controllers & Process MonitorsM U Infrared PyrometersPRESSURE, STRAIN AND FORCEM U Transducers & Strain GagesM U Load Cells & Pressure GagesM U Displacement TransducersM U Instrumentation & AccessoriesFLOW/LEVELM U Rotameters, Gas Mass Flowmeters & Flow ComputersM U Air Velocity IndicatorsM U Turbine/Paddlewheel SystemsM U Totalizers & Batch ControllerspH/CONDUCTIVITYM U pH Electrodes, Testers & AccessoriesM U Benchtop/Laboratory MetersM U Controllers, Calibrators, Simulators & PumpsM U Industrial pH & Conductivity EquipmentDATA ACQUISITIONM U Communications-Based Acquisition SystemsM U Data Logging SystemsM U Wireless Sensors, Transmitters, & ReceiversM U Signal ConditionersM U Data Acquisition SoftwareHEATERSM U Heating CableM U Cartridge & Strip HeatersM U Immersion & Band HeatersM U Flexible HeatersM U Laboratory HeatersENVIRONMENTALMONITORING AND CONTROLM U Metering & Control InstrumentationM U RefractometersM U Pumps & TubingM U Air, Soil & Water MonitorsM U Industrial Water & Wastewater TreatmentM U pH, Conductivity & Dissolved Oxygen InstrumentsMQS5570/1217。

magma中⽂⼿册MAGMASOFT?4.0Manual Part one1.介紹(Introduction) ………………………………1.1MAGMASOFT? 可以提供你什麼？………………1.2如何成功的使⽤MAGMASOFT?………………1.3MAGMASOFT?的⽂件結構………………………1.4拼字跟⽤法………………………………………1.5疑問………………………………………………2.安裝(Installation)……………………………2.1 系統需求2.2 MAGMA安裝………………………………2.3 啟動MAGMASOFT? 執照………………2.3.1 擷取系統資訊………………………………2.3.2 從Email讀取系統和執照檔………………2.3.3 ⼿動輸⼊系統鑰匙………………………………2.3.4 ⼿動輸⼊執照鑰匙………………………………2.3.5 從檔案讀取系統鑰匙……………………………2.3.6 從檔案讀取執照鑰匙……………………………2.4 管理浮動執照………………………………2.4.1 顯⽰連結………………………………2.5 MAGMASOFT? 的專案………………………………2.6 MAGMASOFT? 的畫⾯………………………………2.7滑⿏鍵盤的⽤法………………………………3.專案管理(Project Administration)3.1開啟專案(Open project)………………………………3.2 產⽣新的專案(Create project)………………………3.3 產⽣新的版本(Create Version)…………………………3.4 刪除結果(Delete Result)…………………………3.5 刪除版本(Delete Version)……………………………3.6 刪除專案(Delete project)……………………………3.7專案資訊(Project info)………………………………4.前處理器(Preprocessor)4.1 開始幾何建構………………………………………4.2 管理幾何資料(Sheets)………………………………4.3 幾何資料庫(Geometry database)………………………4.4 輸⼊CAD資料(Importing CAD Data)…………………4.5 定義⾓度及精度(Definition of Angles & Accuracy)………4.6 選擇畫⾯(View options)………………………………4.7建構指令(Construction commands)……………………4.8操作指令(Manipulation commands)……………………4.9控制點(Control Point)………………………………4.10⽀援幾何功能(Support functions)………………………5.網格化(Mesh Generation)5.1 概論(Overview)………………………………5.1.1格⼦⼤⼩ / ‘wall thickness’………………………5.1.2格⼦再細化/ ‘accuracy’, ‘element size’……………5.1.3格⼦的修飾/ ‘smoothing’………………………5.1.4個⼦的外觀/ ‘aspect ratio’………………………5.2材料群的選⽤與網格化的改善………………………5.3產⽣網格(Generate mesh)……………………………5.4檢查網格(Check enmeshment)………………………5.4.1觀看網格(view mesh)…………………………5.4.2觀看網格品質(view mesh quality)………………6.模擬計算(Simulation)6.1 概論(Overview)………………………………6.1.1 充填(Mold filling)………………………………6.1.2 凝固(Solidification)…………………………6.1.3 充填和凝固………………………………6.1.4 批次⽣產(Batch production)……………………6.2 模擬參數定義(Defining simulation parameters)…………6.2.1 材料 / ‘Material definition’………………………6.2.2 熱傳導係數/ ‘Heat transfer definition’…………MAGMAshakeout選項…………………………6.2.36.2.4 充填 / ‘filling’………………………………6.2.5 注湯速率/ ‘pouring rate’………………………6.2.6 凝固 /‘solidification’……………………………6.2.7 批次⽣產/ ‘batch production’……………………6.3 模擬的開始與控制(Simulation control)…………………6.4 錯誤訊息(Error and Warning messages)…………………7. 選項與模組7.1模組………………………………7.2 選項………………………………1介紹(Introduction)鑄造就是將⾦屬液倒⼊模⽳中成形的⼀種⽣產技術,也是⼀種從設計到成品最快速的⽅法之⼀。

PMMA性质：非晶体聚合物，92%光线穿透率，热变性温度介于74°C~102°C间。

优点：1、高光学透明性；2、耐候性佳；3、刚性佳；4、易染色。

用途：灯罩、窗玻璃、标示牌、光学透镜、硬式隐形眼镜、汽车零件。

PMMA塑料的性能简介：聚甲基丙烯酸甲酯,PMMA又叫有机玻璃，压克力(亚加力)。

顾名思义，因为其良好的光学透明性而著名。

它不但具有很高的透光率（92％），而且机械强度高,重量轻,耐紫外线和户外老化优良的电性能等特点。

PMMA的不足之处是表面硬度不够、耐热性差、冲击强度不高，尤其对缺口冲击敏感等。

改性后的PMMA其性能变得更加优异。

PMMA MF001 物性表资料由长城塑胶提供T e L 1 3 6 8 6 6 5 8 5 1 7供应PMMA 韩国LG IF850高流动性。

适用于复杂的架子或面积大而薄的墙饰件。

供应PMMA 韩国LG IH830耐热级、机械强度及表面硬度最强。

适用于尾灯和其他汽车零件。

供应PMMA 韩国LG IH830C型颜色区分：IH830C透明色；IH830C-CP4006（红色）；IH830C-CP2001（黄色）供应PMMA 韩国LG HI-835MS 聚甲基丙烯酸甲酯供应PMMA 韩国LG HI855H 聚甲基丙烯酸甲酯供应PMMA 韩国LG HI533 聚甲基丙烯酸甲酯供应PMMA 日本住友化学HT55X 耐冲击性供应PMMA 日本住友化学HT50Y 注塑级供应PMMA 日本住友化学MH 耐热性供应PMMA 日本住友化学LG2 高流动性，良模压性供应PMMA 南通三菱丽阳MD001抗冲击供应PMMA 南通三菱丽阳MF001 通用级高流动性供应PMMA 南通三菱丽阳IRD-50抗冲击供应PMMA 南通三菱丽阳IRD-70 抗冲击供应PMMA 南通三菱丽阳IRH-50抗冲击供应PMMA 南通三菱丽阳IRH-70抗冲击供应PMMA 南通三菱丽阳VRL-40 抗冲击供应PMMA 南通三菱丽阳TF8 板材导光板适用于小型、薄型的导光板供应PMMA 南通三菱丽阳VH001通用级耐热级耐候性（耐气候性）供应PMMA 南通三菱丽阳VH5导光板板材适用于大型、厚型的导光板供应PMMA 台湾奇美CM-205 耐热级，耐热型射出级、能耐高温、热变形温度高达100°C、机械性强耐。

PMMA MF001 适用于大型或薄型模塑品资料由琨正塑胶提供客服热线 TeL 135,3866,8608PMMA/南通丽阳/MF001特性备注：具有出色的流动性，适用于大型或薄型模塑品用途：杂货，家电，照明重要参数：熔体流动速率:14 g/10min密度:1.19 g/cm3吸水率:0.3 %缺口冲击强度:1.2 拉伸强度:69 MPaPMMA/南通丽阳/TF8特性备注：适用于小型、薄型的导光板用途：笔记本电脑用导光板重要参数：熔体流动速率:10 g/10min密度:1.19 g/cm3吸水率:0.3 %缺口冲击强度:1.2 拉伸强度:59 MPaPMMA/南通丽阳/VH001特性备注：具有最好的耐热性，耐气候性用途：车辆，照明，光学产品重要参数：熔体流动速率:2 g/10min密度:1.19 g/cm3吸水率:0.3 %缺口冲击强度:1.3 拉伸强度:78 MPaPMMA/南通丽阳/VH5特性备注：适用于大型、厚型的导光板用途：台式电脑用导光板重要参数：熔体流动速率:5.5 g/10min密度:1.19 g/cm3吸水率:0.3 %缺口冲击强度:1.2 拉伸强度:62 MPaPMMA/南通丽阳/VRM40特性备注：具有出色的高抗冲击性和流动性用途：文具、手机面板、玩具重要参数：缺口冲击强度:7 拉伸强度:50 MPa热变形温度:90 ℃PMMA典型应用范围汽车工业（信号灯设备、仪表盘等），医药行业（储血容器等），工业应用（影碟、灯光散射器），电子产品的按键（特别是透明的）。

日用消费品（饮料杯、文具等）。

PMMA溶于有机溶剂，如苯酚，苯甲醚等，通过旋涂可以形成良好的薄膜，具有良好的介电性能，可以作为有机场效应管（OFET）亦称有机薄膜晶体管（OTFT）的介质层。

注塑模工艺条件干燥处理：PMMA具有吸湿性因此加工前的干燥处理是必须的。

建议干燥条件PMMA 为90℃、2~4小时。

熔化温度：240~270℃。

121Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA10-1515.........1.5" x 1.5" Standard ..............................................1810-1515PKG..1.5" x 1.5" Standard 4 x 8' Pcs.............................1810-1530.........1.5" x 3" Standard .................................................2110-1530PKG..1.5" x 3" Standard 4 x 8' Pcs ................................2110-1543.........1.5" Quarter Round ...............................................2010-1545.........1.5" x 1.5" x 45......................................................2010-1560.........1.5" x 6" Standard .................................................2410-1575.........1.5" x .75"..............................................................2010-1591.........1.5" x 1.5" Mono Slot ............................................1910-1592.........1.5" x 1.5" Bi-Slot Corner......................................1910-1593.........1.5" x 1.5" Tri-Slot .................................................1910-1594.........1.5" x 1.5" Bi-Slot Mid Frame ...............................1910-3030.........3" x 3" Standard ....................................................2310-3030PKG..3" x 3" Standard 2 x 8' Pcs ...................................2310-3092.........1.5" x 3" Tri-Slot Corner ........................................2210-3093.........1.5" x 3" Quad Slot................................................2210-3094.........1.5" x 3" Bi-Slot Mid Frame ..................................2211-1515.........1.5" x 1.5" Heavy...................................................1811-1515PKG..1.5" x 1.5" Heavy 4 x 8' Pcs .................................1811-1530.........1.5" x 3" Heavy......................................................2111-1530PKG..1.5" x 3" Heavy 4 x 8' Pcs ....................................2111-3030.........3" x 3" Heavy .........................................................2312-001............Upper Door Track 40 - Plastic ..............................8312-002............Lower Door Track 40 - Plastic ..............................8312-006............Sliding Door Guide 1", Upper ...............................8312-007............Sliding Door Guide 1", Lower ...............................8312-010............Mesh Clamp Profile, Clr - Max 13.1ft ...................8212-011............Stiffener/ Handle Profile, Clr - Max 9.8ft ..............8212-012............Sliding Door Guide 40 - Upper, Clr - Max 9.8ft....8312-013............Sliding Door Guide 40 - Lower, Clr - Max 9.8ft....8312-018............Panel Extrusion 40, Clr - Max 19.7ft ....................8212-022............Rolling Door Guide Profile, Clr - Max 13.1 ft.......8612-032............32 x 18 Bi-Slot .......................................................2512-090............Cover/Gasket Strip 1", Clear ................................2912-090B .........Cover/Gasket Strip 1", Black ................................2912-090Y .........Cover/Gasket Strip 1", Yellow ..............................2912-095............Aluminium Cover Strip 1"......................................2912-095B .........Aluminium Cover Strip 1", Black ..........................2912-101............Cover/ Gasket Strip 40, Clr - 6.6ft........................2912-1010.........1" x 1" Standard ....................................................1612-1010PKG..1" x 1" Standard 6 x 8' Pcs ...................................1612-101B .........Cover/ Gasket Strip 40, Blk - 6.6ft .......................2912-101Y .........Cover/ Gasket Strip 40, Yellow - 6.6ft..................2912-102............Al Cover Strip 40, Clr - 6.6ft..................................2912-1020.........1" x 2" Standard ....................................................1612-1020PKG..1" x 2" Standard 4 x 8' Pcs ...................................1612-102B .........Al Cover Strip 40, Blk - 6.6 ft. Length ..................2912-1030.........1" x 3" Standard ....................................................1712-105............Clamp Bar Profile ..................................................2712-106............Panel Gasket .........................................................2812-107............Mesh Gasket .........................................................2812-108............Panel Gasket 10 Clear - Max 410 ft.....................2512-109............19" Rack Angle......................................................2612-110............Rack Angle, Blank .................................................2612-111B .........PVC Cover Strip 40, Blk - 6.6ft.............................2912-111BL .......PVC Cover Strip 40, Blue - 6.6ft ..........................2912-112............Safety Cover Strip 40/28, Yellow - Max 9.8ft.......2812-114............Anti-Skid Cover 40, Blk - Max 65.6ft....................2812-2020.........2" x 2" Standard ....................................................1712-400............UHMW Slide Bar 40 max 120"...........................11112-402............Slide Strip 1" max 120".......................................11112-410............Slide Strip 1.5" max 120"....................................11112-420............UHMW Slide Bar 40 x 10 max 120"...................11112-421............UHMW Guide Profile .............................................8613-012............Steel Tube, Plastic Coated for handles(max. 120 in.).....................................................5413-410............Slide Profile 40....................................................11013-430............Slide Profile 40 Side Flange . (110)13-440............Slide Profile 28....................................................11013-450............Slide Profile 28 Side Flange ...............................11013-800............Slide Profile 56....................................................11013-810............Slide Profile 80....................................................11018-1010.........1" x 1" End Cap .....................................................3118-1020.........1" x 2" End Cap .....................................................3118-1030.........1" x 3" End Cap .....................................................3118-1515.........1.5" x 1.5" End Cap...............................................3118-1530.........1.5" x 3" End Cap..................................................3118-1543.........1.5" Quarter Round End Cap................................3118-1545.........1.5" x 1.5" x 45? End Cap.....................................3118-1575.........1.5" x .75" End Cap...............................................3118-2020.........2" x 2" End Cap .....................................................3118-3030.........3" x 3" End Cap .....................................................3118-710............Access Hole Plug ..................................................3118-713............Access Hole Plug - Steel ......................................3118-807............32x18 End Cap......................................................2519-004............Drill & Counterbore for BHCS or SHCS .............11419-006............Drill & Countersink for FHCS ..............................11419-007............Saw Cut for Linear Shaft.....................................11419-009............Tap 5/16-18........................................................11419-026............Panel Packing for Secure Transport ..................11419-029............Panel - Chamfer Corner ......................................11419-030............Panel - Notch Corner ..........................................11419-104............Special Miter Cut .................................................11419-200............Special Invoice Required ....................................11419-201............Assembly Required .............................................11419-202............Assembly Form Follows......................................11419-203............Packaging in Kit Form.........................................11419-204............Kit Form Follows..................................................11419-205............Special Assembly Documents Enclosed............11419-206............Engineering..........................................................11419-207............On-Site Installation..............................................11419-208............Special Packing Slip Required ...........................11419-210............Special Machining ...............................................11419-211............Miter Connection Service....................................11419-300............Inspection/Acceptance/Approval ........................11419-501............Saw Cut up to 3"x1.5".........................................11419-502............Saw Cut up to 3"x3"............................................11419-503............Saw Cut 6"x1.5"...................................................11419-511............Drill .277" Access Hole - Except 6" side ............11419-512............Drill & Tap (10/32",1/4",5/16", 3/8")....................11419-514............Drill & Tap (1/2" or 5/8" up to 1.5" Deep)...........11419-515............Step Drill for Universal Fastener 1.5" or 1"........11419-516............Drill/ Tap 5/16x1.5" for 5/16"Foot .......................11419-517............Drill/ Tap 3/8"x 2" for 3/8" Foot...........................11419-520............Step Bore for Pneum. Univ. Fastener(3/4" x 1/4")......................................................11419-525............Drill .277" Access Hole thru 6" side ...................11419-527............Panel - Thru Hole up to 3/8"l Profile Square 3"x1.5"l Profile Square 3"x3"l Profile Square 6"x1.5"..................................11419-603............Drill/ Tap/ Mill for Roller PA ................................11419-605............45° Miter Cut, up to 3x3" profile .........................11419-606............45° Miter Cut, 6"x1.5" profile ..............................11420-059............T-Slot Profile 1.5"..................................................3620-062............Heavy T-Slot Bar - 1.5".........................................3620-082............Economy T-Slot Nut, 1.5" - 5/16-18.....................3520-082SS.......Economy T-Slot Nut, 1.5" - 5/16-18,Stainless Steel ...................................................3520-083............Economy T-Slot Nut, 1.5" - 1/4-20.......................3520-088............Economy T-Slot Nut, #10-32...............................3520-093SS.......Economy T-Slot Nut 28, 1/4-20 Stainless Steel .......20-1010.........Cast Gusset 1"......................................................4520-1010C.......Cap for Cast Gusset 1".........................................4520-102z4........Gusset Profile ........................................................2720-182............Economy Offset T-Slot Nut, 1.5" - 5/16-18. (35)122Parker Hannifin CorporationIndustrial Profile Systems Business Unit Wadsworth, Ohio USA20-193............Economy Offset T-Slot Nut 1.5" - 1/4-20.............3520-200............Retainer for Wire mesh 1"Single ..........................8120-201............Retainer for Wire mesh 1" Double........................8120-202............Retainer for Wire mesh 1.5" Single ......................8120-203............Retainer for Wire mesh 1.5" Double.....................8120-300............Joining Plate, 1.5" x 3"..........................................4820-301............Joining Plate, 1.5" x 6"..........................................4820-302............Joining Plate, 3" x 3".............................................4820-303............Joining Plate, 3" x 6".............................................4820-304............Joining Plate, Corner 4.5" x 4.5"..........................4920-305............Joining Plate, T , 4.5" x 4.5".................................4920-306............Joining Plate, Corner 6" x 6"................................4920-307............Joining Plate, T , 6" x 6".......................................4920-310............Joining Plate, 1" x 2".............................................5020-311............Joining Plate, 1" x 4".............................................5020-312............Joining Plate, 2" x 2".............................................5020-313............Joining Plate, 2" x 4".............................................5020-314............Joining Plate, Corner 3" x 3".................................5120-315............Joining Plate, T , 3" x 3".......................................5120-330............Connection Element, 90 1.5" x 1.5" x 1.5"...........4220-335............Connection Element, 90 1" x 1" x 1"....................4320-336............Connection Element, 90 1" x 1" x 2"....................4320-337............Connection Element, 90 1.5" x 1.5" x 3"..............4220-338............Connection Element, 90 1.5" x 3" x 3".................4220-4040.........1 x 1 Single Gusset (die cast)..............................4520-440............Gusset Bracket, 3" x 3" x 1.5"..............................4420-441............Gusset Bracket, 3" x 3" x 3".................................4420-442............Gusset Bracket, 3" x 3" x 1".................................4420-500............Corner Element 1, 1.5"..........................................4620-501............Corner Element 1, 3".............................................4620-502............Corner Element 2, 1.5"..........................................4620-503............Corner Element 2, 3".............................................4620-504............Corner Element 3, 1.5"..........................................4620-505............Corner Element 3, 3".............................................4620-506............Machined Gusset 1" x 1"......................................4720-507............Machined Gusset 1" x 2"......................................4720-508............Machined Gusset 1.5" x 1.5"................................4720-509............Machined Gusset 1.5" x 3"...................................4720-8040.........2 x 2 Single Gusset (die cast)..............................4521-020............Rubber Insert 80....................................................9221-021............Clamping Shoe 80.................................................9221-032............Floor Fastening Set...............................................9221-057z4........L-Bracket Profile....................................................2721-060............L Base Floor Anchor 1.5"......................................9321-061............L Base Floor Anchor 1".........................................9321-073............UHMW Guide Insert Set - 1/4-20..........................8621-075............Roller Insert Set.....................................................8621-1020-04....Base Plate, 1" x 2", 1/4-20..................................10121-1020-05....Base Plate, 1" x 2", 5/16-18................................10121-1030-04....Base Plate, 1" x 3", 1/4-20..................................10121-1030-05....Base Plate, 1" x 3", 5/16-18................................10121-1530-06....Base Plate, 1.5" x 3", 3/8-16..............................10121-1530-08....Base Plate, 1.5" x 3", 1/2-13..............................10121-1530-10....Base Plate, 1.5" x 3", 5/8-11..............................10121-2020-05....Base Plate, 2" x 2", 5/16-18................................10121-2020-06....Base Plate, 2" x 2", 3/8-16..................................10121-2020-08....Base Plate, 2" x 2", 1/2-13..................................10121-250............Flange Foot 1.5" x 1.5".........................................9521-252............Flange Foot 1" x 1"................................................9521-255............Flange Foot 1.5" x 3.0".........................................9521-256............Flange Foot 3.0" x 3.0".........................................9521-300............Caster Swivel 2" - Hollow King Pin.......................9621-301............Caster Swivel 2", Locking - Hollow King Pin........9621-302............Caster Rigid 3" - Top Plate ...................................9721-303............Caster Swivel 3" - Top Plate.................................9721-3030-06....Base Plate, 3" x 3", 3/8-16..................................10121-3030-08....Base Plate, 3" x 3", 1/2-13..................................10121-3030-10....Base Plate, 3" x 3", 5/8-11. (101)21-304............Caster Swivel 3", Locking - Top Plate..................9721-305............Caster Swivel 3" - 7/16 Grip Ring.........................9621-306............Caster Swivel 3", Locking - 7/16 Grip Ring..........9621-309............Caster Swivel 3" - Hollow King Pin.......................9621-310............Caster Swivel 3", Locking - Hollow King Pin........9621-311............Caster Rigid 5" - Top Plate ...................................9721-312............Caster Swivel 5" - Top Plate.................................9721-313............Caster Swivel 5", Locking - Top Plate..................9721-316............Caster Swivel 5" - Plate 550lbs ..........................10021-317............Caster Swivel 5", Locking - Plate 550lbs ...........10021-318............Caster Swivel 5" - Plate 900lbs ..........................10021-319............Caster Swivel 5", Locking - Plate 900lbs ...........10021-320............Standard Duty 1-5/8" - 7/16 Grip Ring .................9621-323............Leveling Caster 1"- Threaded Stud M12..............9921-324............Leveling Caster 1" - Plate Mount.........................9921-325............Floor Lock - Plate Mount.....................................10021-327............Leveling Caster 1.5"- Threaded Stud M12...........9921-328............Leveling Caster 1.5"- Plate Mount.......................9921-330............Socket for 1.5" x 3" Heavy....................................9621-331............Socket for 1.5" x 3" Standard ...............................9621-332............Corner Bracket for Standard Duty Casters ..........9621-333............Straight Bracket for Standard Duty Casters ........9621-336............Caster Swivel 3" - 1/2" Stem ................................9721-337............Caster Swivel 3" - Locking - 1/2" Stem ................9721-338............Caster Swivel 5" - 1/2" Stem ................................9721-339............Caster Swivel 5"- Locking - 1/2" Stem .................9721-340............Furniture 2" - 5/16 Grip Ring.................................9821-341............Furniture 2" - 5/16 Grip Ring-Locking ..................9821-342............Institutional Twin Wheel ........................................9821-343............Institutional Twin Wheel Locking ..........................9821-344............Dual Wheel 3" - 1/2" Stem ....................................9821-401............Knuckle Foot 1.5", 5/16-18 x 2"............................9021-402............Knuckle Foot 1.5", 5/16-18 x 3"............................9021-403............Knuckle Foot 1.5", 3/8-16 x 3"..............................9021-404............Knuckle Foot 3", 1/2-13 x 4".................................9021-405............Knuckle Foot 3", 1/2-13 x 6".................................9021-406............Knuckle Foot 3", 5/8-11 x 4".................................9021-407............Knuckle Foot 3", 5/8-11 x 6".................................9021-409............Corner Mounting Plate ..........................................9221-410............Knuckle Foot 1" Delrin, 1/4-20 x 2"......................8921-411............Knuckle Foot 1" Delrin, 3/8-16 x 3"......................8921-412............Knuckle Foot 1" Steel, 1/4-20 X 2".......................8921-413............Knuckle Foot 1" Steel, 3/8-16 X 3".......................8921-414............Knuckle Foot 1" Steel, 1/2-13 x 3".......................8921-415............L-Base Leveling Foot 1.5".....................................9321-416............L-Base Leveling Foot 1"........................................9321-420............Leveling Foot 3, Bolt Down, 1/2-13......................9121-421............Leveling Foot 3, Bolt Down, 5/8-11......................9121-422............Anti-Vibration Leveler 1/2-13, Light......................9121-423............Anti-Vibration Leveler 1/2-13, Medium.................9121-424............Anti-Vibration Leveler 1/2-13, Heavy ...................9121-440............Floor Mounting Bracket 1.5".................................9421-441............Floor Mounting Bracket 3"....................................9421-442............Floor Mounting Bracket 1"....................................9421-443............Floor Mounting Bracket 2"....................................9421-500............Adapter Plate 1.5".................................................9921-501............Adapter Plate 1.0".................................................9921-502............Adapter Plate 1.5".................................................9921-504............Base Plate for heavy Casters.............................10022-111............Economy Mesh Clamp 1.5"..................................8122-115............Multiblock 1.5" - 1/4-20.........................................8022-116............Multiblock 1" - 1/4-20............................................8022-153............Corner Bracket 1.5"...............................................4122-154............Connector Cap 1.5" Radius ..................................4122-155............Connector Cap 45 Degree ....................................4122-202............Cable Tie Holder....................................................8722-204............T-Clip 5/32-1/4 w/Fast Kit .....................................8722-206............T-Clip 1/4-5/16 w/Fast Kit . (87)123Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA22-209z1........T-Clip 5/16-3/8 w/Fast Kit .....................................8722-211z1........T-Clip 3/8-1/2 w/Fast Kit .......................................8722-213z1........T-Clip 1/2-5/8 w/Fast Kit .......................................8722-216z1........T-Clip 5/8-3/4 w/Fast Kit .......................................8722-219z1........T-Clip 3/4-7/8 w/Fast Kit .......................................8722-223z1........T-Clip 7/8-1 w/Fast Kit ..........................................8722-230............Cable Hose Holder w/ English Fast Kit ................8723-030............Light Duty Aluminium Handle ...............................5323-031............Handle PA 132......................................................5423-032Z1.......Handle PA 179......................................................5423-033............Handle PA 93.5.....................................................5423-038............L-Handle Locking...................................................5523-038z1........Backing Plate.........................................................5723-039............L-Handle Non-locking............................................5523-046............Magnetic Catch......................................................6023-051............Strike Plate for Magnetic Catch............................6023-058............Mini-Key Safety Switch - Straight Key .................7023-059............Mini-Key Safety Switch - Angle Key.....................7023-060............Safety Switch 1 (1 NC + 1 NO).............................7223-061............Safety Switch 1 (2 NC)..........................................7223-062............Safety Switch 2 (1 NC + 1 NO).............................7323-063............Safety Switch 2 (2 NC + 2 NO).............................7323-064............Safety Switch 3 (2 NC) - To Lock.........................7423-066............Safety Switch 3 (2 NC) - To Unlock .....................7423-070............Open Angled Handle .............................................5323-071............Closed Angled Handle ..........................................5323-072............Tube Handle Ends.................................................5423-073............Tube Handle Center Supports ..............................5423-102............Mini-Key Mounting Bracket...................................7023-104............Safety Switch Mounting Bracket 1.......................7223-108............Mini Key Mounting Bracket - Top .........................7123-109............Mini Key Mounting Bracket - Sliding ....................7123-110............Safety Switch Mounting Bracket 3.......................7423-119............Mounting Bracket for Magnetic Catch..................6023-120............Ball Catch Bracket Style 1....................................5823-121............Ball Catch ..............................................................5823-122............Magnetic Catch Bracket........................................6023-124............Door Stop 1"..........................................................6323-125............Door Stop 1.5" - Straight.......................................6323-126............Door Stop 1.5" - Angle ..........................................6323-127............Ball Catch Bracket Style 2....................................5823-128............Ball Plunger, 3/8" Dia x .786"...............................5923-129............Ball Plunger, 1/2" x 1.10"......................................5923-130............Rachet Lock (for panel sliding doors)..................6323-133............Quarter Turn Latch T-Handle Non-Locking..........5523-134............Quarter Turn Latch Wing Knob Locking...............5523-135............Quarter Turn Latch - Square Insert ......................5523-137............Ball Catch Bracket 1"............................................5923-140z1........Spare Key for 23-134/23-144...............................5723-140z2........Square Key for 23-135/23-145.............................5723-140z4........Cam 45-2 Offset ....................................................5723-140z5........Cam 35-10 Offset ..................................................5723-140z7........Keeper Bracket......................................................5723-140z8........Cam 45-8...............................................................5723-142z1........Hooked Cam..........................................................5723-143............Quarter Turn Latch T-Handle Non-Locking Panel 5623-144............Quarter Turn Latch Wing Knob Locking Panel ....5623-145............Quarter Turn Latch - Square Insert Panel ...........5623-155............Slam Latch - Keyed...............................................6223-156............Slam Latch - Non Locking.....................................6223-158............Velcro Plate ...........................................................6323-159............Internal Handle for Quarter Turn Handles............5623-160............Deadbolt Latch ......................................................6223-210............Grabber Door Catch ..............................................6123-211............Grabber Door Catch w/Micro-Switch..................6123-212............Grabber Door Catch Bracket 90 degree ..............6123-213............Grabber Door Catch Bracket Flat.........................6123-220............Adjustable Hinge 1................................................6823-222............Adjustable Hinge 2................................................6823-224............Positioning Hinge 85°............................................6823-226............Positioning Hinge 120°..........................................6823-228............Positioning Hinge 155°..........................................6823-250............Hinge 1" - Steel .....................................................6623-250L .........Hinge 1" - Steel Left ..............................................6623-250R.........Hinge 1" - Steel Right............................................6623-251............Hinge 1"/1.5" - Steel..............................................6623-251L .........Hinge 1"/1.5" - Steel Left ......................................6623-251R.........Hinge 1"/1.5" - Steel Right ....................................6623-252............Hinge 1.5" - Steel ..................................................6623-252L .........Hinge 1.5" - Steel Left ...........................................6623-252R.........Hinge 1.5" - Steel Right ........................................6623-260............Pivot Joint 1", Blk ..................................................6923-261............Pivot Joint 1", Blk - Locking..................................6923-262............Pivot Joint 1.5", Blk ...............................................6923-263............Pivot Joint 1.5", Blk - Locking...............................6923-550............Plastic Hinge 1".....................................................6723-550L .........Plastic Hinge 1" - Left ...........................................6723-550R.........Plastic Hinge 1" - Right .........................................6723-551............Plastic Hinge 1.5"..................................................6723-551L .........Plastic Hinge 1.5" - Left ........................................6723-551R.........Plastic Hinge 1.5" - Right......................................6723-552............Plastic Hinge 1/1.5"...............................................6723-552L .........Plastic Hinge 1/1.5" - Left .....................................6723-552R.........Plastic Hinge 1/1.5" - Right...................................6723-620............Aluminum Hinge 1.5" - Right Long .......................6423-621............Aluminum Hinge 1.5" - Left Long..........................6423-622............Aluminum Hinge 1.5" - Right Short ......................6423-623............Aluminum Hinge 1.5" - Left Short .........................6423-624............Aluminum Hinge 1.5" - Receiver ..........................6423-625............Aluminum Hinge 1.5" - Double Pin .......................6423-626............Aluminum Lift off Hinge 1.5" - Heavy Duty ..........6523-626L .........Aluminum Lift off Hinge 1.5" - Left .......................6523-626R.........Aluminum Lift off Hinge 1.5" - Right .....................6523-630............Aluminum Hinge 1" - Right Long ..........................6423-631............Aluminum Hinge 1" - Left Long.............................6423-632............Aluminum Hinge 1" - Right Short..........................6423-633............Aluminum Hinge 1" - Left Short ............................6423-634............Aluminum Hinge 1" - Receiver..............................6423-635............Aluminum Hinge 1" - Double Pin ..........................6423-636............Aluminum Lift off Hinge 1" - Heavy Duty..............6523-636L .........Aluminum Lift off Hinge 1" - Left...........................6523-636R.........Aluminum Lift off Hinge 1" - Right ........................6523-640............Aluminum Lift off Hinge 1"/1.5" - Heavy Duty......6523-640L .........Aluminum Lift off Hinge 1"/1.5" - Left ...................6523-640R.........Aluminum Lift off Hinge 1"/1.5" - pression Springfor Economy T-Nuts, 1/pression Springfor Economy T-Nuts, 5/16-18...........................3525-001............T-Slot Nut 40 Steel 1/4-20....................................3425-002............T-Slot Nut, 1.5" - 5/16-18......................................3425-002SS.......T-Slot Nut, 1.5" - 5/16-18, Stainless Steel...........3425-003............Standard Fastener 5/16-18...................................3225-003SS.......Standard Fastener 5/16-18, Stainless Steel........3225-004............Universal Fastener 5/16-18..................................3325-005............Drop In T-Nut 10-32...................................................25-006............Drop in T-Nut 1/4-20", Rubber post...........................25-007............Drop in T-Nut 5/16-18", Rubber post.........................25-008............Drop-in T-Nut, 1/4-20, 28/56......................................25-009............T-Slot Nut, 1.5" *- #10-32......................................3425-014............Single Ear Standard Fastener 1.5" - 5/16-18.......3225-015............Profile to Wall Universal Fastener 5/16-18..........3325-016............Butt Fastener Assembly 5/16-18..........................3325-017............Butt Fastener Assembly 1/4-20............................3325-022............Standard Fastener, 1/4-20....................................3225-022z1........Standard Fastener, 1/4-20 - Clip .. (32)。

P/N: 1802051190010 *1802051190010*MGate 5119 Series Quick Installation GuideVersion 1.0, December 2021Technical Support Contact Information/support2021 Moxa Inc. All rights reserved.OverviewThe MGate 5119 Series is an Ethernet gateway designed for the power industry to integrate Modbus, DNP3, IEC 60870-5-101/104 devices to an IEC 61850 MMS network.Package ChecklistBefore installing the MGate 5119, verify that the package contains the following items:• 1 MGate 5119 gateway• 1 serial cable: CBL-RJ45F9-150•Quick installation guide (printed)•Warranty cardPlease notify your sales representative if any of the above items is missing or damaged.Optional Accessories (can be purchased separately)•CBL-F9M9-150: DB9-female-to-DB9-male serial cable, 150 cm •CBL-F9M9-20: DB9-female-to-DB9-male serial cable, 20 cm •CBL-RJ45F9-150: RJ45-to-DB9-female serial cable, 150 cm •CBL-RJ45SF9-150: RJ45-to-DB9-female serial shielded cable, 150 cm•Mini DB9F-to-TB DB9: Female-to-terminal-block connector •WK-36-02: Wall-mounting kit, 2 plates with 6 screws•CBL-PJTB-10: Non-locking barrel plug to bare-wire cable Hardware IntroductionLED IndicatorsLED Color DescriptionReady Off Power is off or a fault condition existsGreen Steady: Power is on, and the MGate is functioningnormallyRed Steady: Power is on, and the MGate is booting upBlinking slowly: Indicates an IP conflict, or theDHCP or BOOTP server is not responding properlyFlashing quickly: the microSD card failedMB/101/ 104/DNP3 Off No communication with a Modbus/101/104/DNP3 deviceGreen Normal Modbus/101/104/DNP3 communication in progressRed When the MGate 5119 acts as a Modbus master:1.Received an exception code from the slavedevice2.Received a framing error (parity error,checksum error)3.Timeout (the master sent a request but noresponse was received)When the MGate 5119 acts as an IEC 60870-5-101/104/ DNP3 master:LEDColor Description1. Received an outstation exception (formaterror, checksum error, invalid data, outstation responds are not supported)2. Timeout (the master sent a command, but noresponse was received)850Off No communication with the IEC 61850 system Green Normal IEC 61850 communication in progress Red When the MGate 5119 acts as an IEC 61850server:1. Received an abnormal package (wrongformat, unsupported function code)2. Failed to establish an IEC 61850 connection3. Disconnected the IEC 61850 connectionDimensionsUnit: mm (inch)Reset ButtonRestore the MGate to factory default settings by using a pointed object (such as a straightened paper clip) to hold the reset button down until the Ready LED stops blinking (approximately five seconds).Pull-high, Pull-low, and Terminator for RS-485Beneath the MGate 5119’s top cover, you will find DIP switches to adjust each serial port’s pull-high resistor, pull-low resistor, and terminator.SW1 2 3 Pull-high resistor Pull-low resistor Terminator ON 1 k Ω 1 k Ω 120 Ω OFF 150 k Ω*150 k Ω*–**DefaultHardware Installation Procedure1.Connect the MGate 5119's terminal block to the power supply,which could provide 12 to 48 VDC.e a serial or Ethernet cable to connect the MGate to the ModbusRTU/ASCII/TCP, DNP3 Serial/TCP, IEC60870-5-101/104 device. e an Ethernet cable to connect the MGate to the IEC 61850 MMSsystem.4.The MGate 5119 is designed to be attached to a DIN rail ormounted on a wall. For DIN-rail mounting, push down the spring and properly attach it to the DIN rail until it “snaps” into place. For wall mounting, install the wall-mount kit (optional) first and then screw the device onto the wall. An M3 screw is suggested, and the minimum length of the screw should be 10 mm.The following figure illustrates the two suggested mounting options:The following figure illustrates how to attach screws to the mounting kits:DIN Rail:Wall-mount:NOTE The equipment is intended to be supplied by the external power source (UL listed/ IEC 60950-1/ IEC 62368-1), which outputcomplies with ES1/SELV, PS2/LPS, output rating is 12 to 48VDC, 0.455 A min., an ambient temperature 75°C minimum.NOTE Before connecting the Equipment to DC power inputs, make sure DC power source voltage is stable•The wiring of input terminal block shall be installed by skilled person.•Wire type: Cu•Only use 28-18 AWG wire size, torque value 0.5 N-m.•One individual conductor in a clamping point.NOTE If you are using a Class I adapter, the power cord should beconnected to an outlet with an earthing connection Software Installation InformationYou can download the User's Manual and Device Search Utility (DSU) from Moxa's website: . Please refer to the User’s Manual for additional details on using the DSU.The MGate 5119 also supports login via a web browser.Default IP address: 192.168.127.254Default account: adminDefault password: moxaPin AssignmentsSerial Port (Male DB9) PinRS-232RS-422/ RS-485 (4W)RS-485 (2W) 1 DCD TxD-(A) – 2 RXD TxD+(B) –3 TXD RxD+(B)Data+(B) 4 DTR RxD-(A) Data-(A) 5* GND GND GND 6 DSR – – 7 RTS – – 8 CTS – – 9 – ––*Signal groundEthernet Port (RJ45) Pin Signal 1 Tx+ 2 Tx- 3 Rx+ 6Rx-Power Input and Relay Output PinoutsV2+V2-V1+V1-ShieldedGroundDC Power Input 2 DCPowerInput 2 N.O.CommonN.C.DCPower Input 1 DC Power Input 1SpecificationsPower Requirements Power Input 12 to 48 VDC Input Current 455 mA max. Operating Temperature -40 to 75°C (-40 to 167°F) Ambient Relative Humidity 5 to 95% (non-condensing) Dimensions 36 x 120 x 150 mm (1.42 x 4.72 x 5.91 in) Reliability Alert Tools Built-in buzzer and RTC MTBF 1,180,203 hrs.Moxa Inc.No. 1111, Heping Rd., Bade Dist., Taoyuan City 334004, Taiwan。

magnetom mica 参数
Magnetom Mica是一种先进的医疗设备，能够为患者提供精确而高质量的成像结果，以帮助医生做出准确诊断和治疗计划。

它采用了最新的磁共振成像(MRI)技术，具有出色的图像质量和卓越的性能。

Magnetom Mica的设计非常紧凑，占地面积小，适合在有限空间内使用。

它的磁体系统采用了先进的超导技术，能够产生高强度的磁场，以获得更清晰的图像。

同时，它的扫描速度也非常快，有效减少了患者的等待时间。

Magnetom Mica还具有智能化的功能，能够根据患者的具体情况进行个性化的扫描设置。

它可以根据不同的病灶类型和部位，自动调整扫描参数，以获得最佳的成像效果。

这不仅简化了医生的操作流程，还提高了诊断的准确性。

除了在成像质量和性能方面的优势，Magnetom Mica还注重患者的舒适度和安全性。

它采用了先进的减噪技术，降低了扫描过程中的噪音，让患者感受更加舒适。

同时，它还具有自动调节扫描参数的功能，能够减少对患者的辐射剂量，保护他们的健康。

总的来说，Magnetom Mica是一台功能强大的磁共振成像设备，具有出色的图像质量、卓越的性能和智能化的功能。

它为医生提供了可靠的诊断工具，为患者提供了更好的诊疗体验。

相信随着技术的不断进步，Magnetom Mica将在医疗领域发挥越来越重要的作用，
为人类的健康事业做出更大的贡献。

Installationing the dimensions below,mark the mounting and wire hole locations onto the proposed mounting surface.Drill two,.250"diameter mounting holes and a .625"(minimum)wire access hole into the mounting surface.2.Place the appropriate gasket into position on the rear of the M9assembly (see Gasket Note).NOTE:On the back of the gasket,the word "BOTTOM"shows the correct orientation.Insert the slotted hole screw grommet through the mounting holes on the M9/Gasket assembly.Feed the M9wires through the wire access hole in the mounting surface.Press the M9/Gasket/Grommet assembly onto its mounting location so that it is flat against the mounting surface.3.With the assembly in position and using the hardware provided,tighten the mounting screws until the lighthead assembly is drawn firmly against the mounting surface.DO NOT OVERTIGHTEN!4.9Using appropriately sized wires (minimum 18AWG),extend the M wires to their designated connections.Refer to the diagram below for wiring and fusing information.©20Whelen Engineering Company Inc.21Form No.A ()14D46010821Safety First: This document provides all the necessary information to allow your Whelen product to be properly and safely installed. Before beginning the installation and/or operation of your new product, the installation technician and operator must read this manual completely. Important information is contained herein that could prevent serious injury or damage.M9 Series LED Lighthead - (B/T/T, Turn Signal, Back-Up)For warranty information regarding this product, visit /warranty•Proper installation of this product requires the installer to have a good understanding of automotive electronics,systems and procedures.•Whelen Engineering requires the use of waterproof butt splices and/or connectors if that connector could be exposed to moisture.•Any holes,either created or utilized by this product,should be made both air-and watertight using a sealant recommended by your vehicle manufacturer.•Failure to use specified installation parts and/or hardware will void the product warranty!•If mounting this product requires drilling holes,the installer MUST be sure that no vehicle components or other vital parts could be damaged by the drilling process.Check both sides of the mounting surface before drilling begins.Also de-burr any holes and remove any metal shards or remnants.Install grommets into all wire passage holes.•Do not install this product or route any wires in the deployment area of your air bag.Equipment mounted or located in the air bag deployment area will damage or reduce the effectiveness of the air bag,or become a projectile that could cause serious personal injury or death.Refer to your vehicle owner's manual for the air bag deployment area.The User/Installer assumes full responsibility to determine proper mounting location,based on providing ultimate safety to all passengers inside the vehicle.•For this product to operate at optimum efficiency,a good electrical connection to chassis ground must be made.The recommended procedure requires the product ground wire to be connected directly to the NEGATIVE (-)battery post.•If this product uses a remote device to activate or control this product,make sure that this control is located in an area that allows both the vehicle and the control to be operated safely in any driving condition.•Do not attempt to activate or control this device in a hazardous driving situation.•This product contains either strobe light(s),halogen light(s),high-intensity LEDs or a combination of these lights.Do not stare directly into these lights.Momentary blindness and/or eye damage could result.•Use only soap and water to clean the outer e of other chemicals could result in premature lens cracking (crazing)and discoloration.Lenses in this condition have significantly reduced effectiveness and should be replaced immediately.Inspect and operate this product regularly to confirm its proper operation and mounting condition.Do not use a pressure washer to clean this product.•W ARNING!All customer supplied wires that connect to the positive (+)terminal of the battery must be sized to supply at least 125%of the maximum operating current and “at the battery”to carry that load.DO NOT USE CIRCUIT BREAKERS FUSED WITH THIS PRODUCT!•FAILURE TO FOLLOW THESE PRECAUTIONS AND INSTRUCTIONS COULD RESULT IN DAMAGE TO THE PRODUCT OR VEHICLE AND/OR SERIOUS INJURY TO YOU AND YOUR PASSENGERS!51 Winthrop RoadChester, Connecticut 06412-0684Phone: (860) 526-9504SalesEmail:*******************CanadianSales:************************CustomerService:*******************B/T/T3 POS DEUTSCH SOCKET POS.A - BROWN POS. B -YELLOW POS. C - WHITE AMP 3 POS PIN POS 1 - BROWN POS 2 -YELLOW POS 3 - WHITE BACKUP3 POS DEUTSCH SOCKET POS.A - WHITE POS. B - N/C POS. C - BLACK AMP 3 POS PIN POS 1 - WHITE POS 2 - N/C POS 3 - BLACK TURN SIGNAL2 POS DEUTSCH SOCKET POS.A - ORANGE POS. B - BLACK CAP - WHT/VIO AMP3 POS PIN POS 1 - N/CPOS 2 - ORANGE POS 3 - BLACK CAP - WHT/VIOWiring:Back-Up ModelConnect WHT wire to output wire of the back-up light circuit.(+) 10-30V Connect BLK wire to GROUND.B/T/T ModelConnect YEL wire to (+) 10-30V output wire of brake light circuit.Connect BRN wire to (+) 10-30V output wire of the taillight circuit.Connect WHT wire to GROUND.Turn Signal ModelConnect ORG wire to (+)10-30V output wire of the turn signal circuit.Connect BLK wire to GROUND.Connect WHT/VIO wire to a momentary switch and extend the wire to (+)10-30V.Fuse wire @ 1Amp.TURN SIGNAL Model ®1.Steady On (Arrow)Sequence2.to Solid (80 FPM)Flashing Arrow3.(80 FPM)Flashing Solid 4.(80 FPM)Sequence to Solid 5.(120 FPM)6.Flashing Arrow (120 FPM)7.Flashing Solid (120 FPM)Sequence to Solid 8.Steady On (Slow)Sequence to Solid 9.Steady On (Fast)Steady On (Solid)10.WHITE/VIO - ScanLock™Pattern Selection:This feature allows the user to select from several available flash patterns. Lighthead must be powered on for Scan-Lock to work.TO CYCLE THROUGH ALL PATTERNS:Apply (+) 10-30V to the WHT/ VIO wire for less than 1 second and release.To cycle backward, apply (+) 10-30V to the WHT/VIO wire for over 1 second and release.TO SET A PATTERN AS DEFAULT:Allow the pattern to run for more than 5seconds.The lighthead will now display this pattern when active .TO RESET TO THE FACTORY DEFAULT PATTERN:Turn off power. While applying (+) 10-30V to theWHT/VIO wire, turn power on.The lighthead will reset to its default pattern.。

Maltose Assay KitCatalog Number MAK019Storage Temperature –20 ︒CTECHNICAL BULLETINProduct DescriptionMaltose is a disaccharide containing two glucose molecules with an α(1→4) glycosidic linkage. Maltose can be derived from starch in food through the action of amylase. Maltose can be found in many food products, including beer, cereals, and pasta.The Maltose Assay kit provides a simple and direct procedure for measuring maltose in a variety of samples, including serum, plasma, food, or growth media. In this kit, maltose is converted to two glucose units via α-D-Glucosidase. Glucose is further oxidized, resulting in a colorimetric (570 nm)/fluorometric(λex = 535/λem = 587 nm) product, proportional to the maltose present.ComponentsThe kit is sufficient for 100 assays in 96 well plates. Maltose Assay Buffer 25 mL Catalog Number MAK019AMaltose Probe 1 vl Catalog Number MAK019Bα-D-Glucosidase 1 vl Catalog Number MAK019DEnzyme Mix 1 vl Catalog Number MAK019EMaltose Standard, 100 nmole/μL 0.1 mL Catalog Number MAK019F Reagents and Equipment Required but Not Provided.•96 well flat-bottom plate – It is recommended to use black plates with clear bottoms for fluorescenceassays and clear plates for colorimetric assays.•Fluorescence or spectrophotometric multiwell plate readerPrecautions and DisclaimerFor R&D use only. Not for drug, household, or other uses. Please consult the Safety Data Sheet for information regarding hazards and safe handling practices.Preparation InstructionsBriefly centrifuge vials before opening. To maintain reagent integrity, avoid repeated freeze/thaw cycles.Maltose Assay Buffer – Allow buffer to come to room temperature before use.Maltose Probe – Warm to 37 ︒C to thaw the solution prior to use. Store protected from light and moisture at –20 ︒C.α-D-Glucosidase and Maltose Enzyme Mix –Reconstitute with 220 μL of Maltose Assay Buffer.Mix well by pipetting (don’t vortex), then aliquot and store, protected from light and moisture, at –20 ︒C.Keep on ice while in use. Use within 2 months ofreconstitution.Storage/StabilityThe kit is shipped on wet ice and storage at –20 ︒C, protected from light, is recommended.2ProcedureAll samples and standards should be run in duplicate. Maltose Standards for Colorimetric DetectionDilute 5 μL of the 100 nmole/μL Maltose Standard with 995 μL of the Maltose Assay Buffer to prepare a0.5 nmole/μL standard solution. Add 0, 2, 4, 6, 8, and 10 μL of the 0.5 nmole/μL standard solution into a96 well plate, generating 0 (blank), 1, 2, 3, 4, and5 nmole/well standards. Add Maltose Assay Buffer to each well to bring the volume to 50 μL.Maltose Standards for Fluorometric Detection Prepare a 0.5 nmole/μL solution as for the colorimetric assay. Dilute 20 μL of the 0.5 nmole/μL solution with 180 μL of the Maltose Assay Buffer to prepare a0.05 nmole/μL solution. Add 0, 2, 4, 6, 8, and 10 μL of the 0.05 nmole/μL standard solution into a 96 well plate, generating 0 (blank), 0.1, 0.2, 0.3, 0.4, and0.5 nmole/well standards. Add Maltose Assay Buffer to each well to bring the volume to 50 μL.Sample PreparationSamples may be assayed directly. Serum may diluted directly with Maltose Assay Buffer. Add 1 to 50 μl of sample to wells. Bring samples to a final volume of50 μL with Maltose Assay Buffer.Note: For unknown samples, it is suggested to test several sample dilutions to ensure the readings are within the linear range of the standard curve. Assay Reaction1. Add 2 μL of α-D-Glucosidase solution to eachsample and standard well, mixing well to convertmaltose to glucose.Note: Glucose in the samples can generate background in the maltose assay. However, the glucose background can be easily eliminated by doing a glucose background control in the absence ofα-D-Glucosidase. If glucose is present in the samples, prepare two wells for each sample. Add 2 μL ofα-D-Glucosidase into one well, and add 2 μL of Maltose Assay Buffer into the other well as the glucose background control.2. Set up Reaction Mixes according to the scheme inTable 1. 50 μL of the appropriate Reaction Mix isrequired for each reaction (well).Table 1.Reaction MixesNote: In the fluorometric Assay, using 0.4Probe for each reaction will significantly decrease fluorescence background, and thus increase fluorescence signal/noise ratio.3. Add 50 μL of the appropriate Reaction Mix to eachof the wells. Mix well using a horizontal shaker orby pipetting, and incubate the reaction for60 minutes at 37 ︒C. Protect the plate from lightduring the incubation.4. For colorimetric assays, measure the absorbanceat 570 nm (A570). For fluorometric assays, measure fluorescence intensity (λex = 535/λem = 587 nm).3 ResultsCalculationsThe background for either assay is the value obtained for the 0 (blank) maltose standard. Correct for the background by subtracting the blank value from all readings. Background values can be significant and must be subtracted from all readings. Correct for glucose background by subtracting the glucose background measurement from maltose samples. Use the values obtained from the appropriate maltose standards to plot a standard curve. The amount of maltose present in the samples may be determined from the standard curve.Note: A new standard curve must be set up each time the assay is run. Concentration of MaltoseS a/S v = CS a = Amount of maltose in unknown sample (nmole) from standard curveS v = Sample volume (μL) added to reaction wellC = Concentration of maltose in sampleMaltose molecular weight: 342.3 g/moleGlucose molecular weight: 180.2 g/moleSample CalculationAmount of maltose (S a) = 2.84 nmole(from standard curve)Sample volume (S v) = 50 μLConcentration of maltose in sample2.84 nmole/50 μL = 0.0568 nmole/μL0.0568 nmole/μL ⨯ 342.3 ng/nmole = 19.44 ng/μL4SS,MF,MAM 12/19-1 ©2019 Sigma-Aldrich Co. LLC. All rights reserved. SIGMA-ALDRICH is a trademark of Sigma-Aldrich Co. LLC, registered in the US and other countries. Sigma brand products are sold through Sigma-Aldrich, Inc. Purchaser must determine the suitability of the product(s) for their particular use. Additional terms and conditions may apply. Please see product information on the Sigma-Aldrich website at and/or on the reverse side of the invoice or packing slip.。

ELM98xxxA VOLTAGE REGULATOR■PIN CONFIGURATION123( TOP VIEW )SOT-89123( TOP VIEW )SOT-23■SERIES* Available 1.2V ～6.0V output voltage at 0.1V step as semi-custom-made IC■MARKINGSOT-89①②③④①: Represents the decimal digit of the Output Voltage②: Represents the integer digit of the Output Voltage③ : Represents the assembly lot numberA ～Z repeated (I,O,X excepted)④ : Represents the assembly lot number0～9 repeated■SELECTION GUIDEELM98 x x x A↑↑↑↑a b c d■BLOCK DIAGRAM■STANDARD CIRCUITSOT-23①②③④①: Represents the integer digit of the Output Voltage②: Represents the decimal digit of the Output Voltage③ : Represents the assembly lot number A ～Z repeated (I,O,X excepted)④ : Represents the assembly lot number～9 repeated■MAXIMUM ABSOLUTE RATINGS-40-20204060802.602.622.642.662.682.702.722.742.762.782.80T op (°C)V o u t (v )Vout - T op204060801001202.22.42.62.83.03.2Iout (mA)Vout - IoutV o u t (V )204060801000.20.40.60.81.01.21.41.61.82.00Iout (mA)V d i f (V )Vdif - Iout2.22.42.62.83.03.23.42.02.22.42.62.8Vin (V)Vo u t (V )Vout - Vin5.06.07.02.662.682.702.722.74Vin (V)V o u t (V )Top=25°CVout - Vin-40-200204060802.03.04.05.06.07.0T op(°C)I s s (μA )Iss - T opVin=4.7V12342.03.04.05.06.0T ime (ms)I n p u t ,O u t p u t V o l t a g e (V )Input T ransient Response12342.02.53.03.54.04.55.05.56.0T ime (ms)I n p u t ,O u t p u t V o l t a g e (V )Input T ransient Response12342.03.04.05.0T ime (ms)O u t p u t V o l t a g e (V )Load T ransient response2.0 4.0 6.08.010.02.03.04.05.06.07.0Vin (V)I s s (μA )Top=25°CIss - Vin204060801001201402.62.83.03.23.4Iout (mA)V o u t (V )Vout - Iout2.6 2.83.0 3.2 3.4 3.62.42.62.83.0Vin (V)V o u t (V )Vout - Vin4.05.06.07.02.962.983.003.023.04Vin (V)V o u t(V )Top=25°CVout - Vin-40-20204060802.902.922.942.962.983.003.023.043.063.083.10T op (°C)V o u t (v )Vout - Top204060801000.20.40.60.81.01.21.41.61.82.00Iout (mA)V d i f (V )Vdif - Iout2.04.06.08.010.02.04.06.0Vin (V)I s s (μA )Top=25°CIss - Vin-40-200204060802.04.06.0T op(°C)I s s (μA )Iss - T opVin=5.0V12342.03.04.05.06.0T ime (ms)I n p u t ,O u t p u t V o l t a g e (V )Input T ransient Response12342.02.53.03.54.04.55.05.56.0T ime (ms)I n p u t ,O u t p u t V o l t a g e (V )Input Transient Response12342.03.04.05.0T ime (ms)O u t p u t V o l t a g e (V )Load T ransient response204060801001201402.83.03.23.43.63.8Iout (mA)Vout - IoutV o u t (V )3.03.23.43.63.82.62.83.03.23.4Vin (V)Vo u t (V )Vout - Vin4.05.06.07.03.263.283.303.323.34Vin (V)V o u t (V )Top=25°CVout - Vin-40-20204060803.203.223.243.263.283.303.323.343.363.383.40T op (°C)V o u t (v )Vout - T op204060801000.20.40.60.81.01.21.41.61.82.00Iout (mA)V d i f (V )Vdif - Iout2.04.06.08.010.02.04.06.08.0Vin (V)I s s (μA )Top=25°CIss - Vin-40-200204060802.04.06.08.0T op(°C)I s s (μA )Iss - T opVin=5.3V12342.03.04.05.06.0T ime (ms)I n p u t ,O u t p u t V o l t a g e (V )Input T ransient Response012342.02.53.03.54.04.55.05.56.0T ime (ms)I n p u t ,O u t p u t V o l t a g e (V )Input T ransient Response12342.03.04.05.0T ime (ms)O u t p u t V o l t a g e (V )Load T ransient response204060801001201401601802004.64.85.05.25.4Iout (mA)V o u t (V )Vout - Iout4.6 4.85.0 5.2 5.44.44.64.85.0Vin (V)V o u t (V )Vout - Vin6.07.08.09.04.854.904.955.005.055.105.15Vin (V)V o u t(V )Top=25°CVout - Vin-40-20204060804.904.924.944.964.985.005.025.045.065.085.10T op (°C)V o u t (v )Vout - T op204060801000.20.40.60.81.01.21.41.61.82.00Iout (mA)V d i f (V )Vdif - Iout4.06.08.010.02.04.06.08.0Vin (V)I s s (μA )Top=25°CIss - Vin-40-200204060802.04.06.08.0T op(°C)I s s (μA )Iss - T opVin=7.0V12344.05.06.07.08.0T ime (ms)I n p u t ,O u t p u t V o l t a g e (V )Input T ransient Response12344.05.06.07.0T ime (ms)O u t p u t V o l t a g e (V )Load T ransient response12344.04.55.05.56.06.57.07.58.0T ime (ms)I n p u t ,O u t p u t V o l t a g e (V )Input T ransient Response。

MEL9Tape Replay MachineCongratulations on purchasing the Electro-Harmonix MEL9 Tape Replay Machine. Now any electric guitar player can have access to nine magically quirky, dark and unique Mellotron® sounds. No more extra devices such as special and cumbersome 13-pin MIDI pickups! In addition to electric guitar, you can trigger the MEL9 with any instrument that produces an electrical output, such as a keyboard or a bass, down to 55 Hz or A1.The polyphonic MEL9 has superior tracking; you can create single notes or chords with ease. The MEL9 will follow guitar bends, dive bombs, slurs, and any other guitar expression/performance techniques you can throw at it!WARNING: Your MEL9 comes equipped with an Electro-Harmonix 9.6DC-200BI power supply (same as used by Boss® & Ibanez®: 9.6 Volts DC 200mA). The MEL9 requires 100mA at 9VDC with a center negative plug. Using the wrong adapter or a plug with the wrong polarity may damage your MEL9 and void the warranty.GETTING STARTEDConnect the supplied power adapter to the 9V power jack. Plug your instrument into the INPUT jack; connect your amp to the EFFECT OUTPUT jack. Set the DRY knob to minimum (fully counterclockwise) and set the other top row knobs to 12 o’clock. Select a preset (“ORCHESTRA” is a good starting point) and step on the footswitch to turn on the LED. Play your instrument and adjust controls to your liking.Mellotron is a registered trademark of David Kean, M. Resch AB and Markus Resch.CONTROLSDRY VOL KNOBThe DRY VOL knob controls the volume of the untreated instrument level on the EFFECT OUTPUT jack.EFFECT VOL KNOBThe EFFECT VOL knob controls the overall volume of the selected preset at the EFFECT OUTPUT jack.ATTACK KNOBUse the ATTACK knob to set the volume swell speed, or the speed at which the effect begins to be heard. Turn the ATTACK knob down (fully counterclockwise) for a fast attack with minimum swell. Turn the knob up to increase the amount of swell and to have the notes fade in more gradually.NOTE: When using the BRASS preset, the ATTACK knob adjusts the speed of a filter sweep. This adjustment controls how quickly the BRASS sound gets bright. SUSTAIN KNOBThe SUSTAIN knob controls the amount of time a sound continues to play after you stop playing. When the SUSTAIN knob is turned down (fully counter-clockwise), the fadeout time is at its minimum setting. Turn the knob up to increase the fadeout time.NOTE: When using the BRASS preset, the SUSTAIN knob adjus ts the amount of “lip buzz”―characteristic of brass instruments such as trumpet―heard at the onset of new notes. “Lip buzz” is a subtle addition to the BRASS preset, and at times you may have difficulty hearing the impact on the sound produced by adjusting the SUSTAIN knob.PRESET KNOBTurn the white numbered knob to select a preset sound.DRY OUTPUT JACKThe DRY OUTPUT jack outputs the signal present at the INPUT jack through a buffer circuit. In either EFFECT or BYPASS mode, the dry signal is always present at the DRY OUTPUT jack.EFFECT OUTPUT JACKThe EFFECT OUTPUT jack sends the mix set by the DRY and EFFECT volume controls.BYPASS FOOTSWITCHPress the BYPASS footswitch to toggle the MEL9 OUTPUT jack between buffered BYPASS and EFFECT mode. The status LED lights when you are in EFFECT mode.PRESET DESCRIPTIONS1.ORCHESTRA–This sound represents a full orchestra—including an octavebelow the normal guitar—and produces a gigantic, full sound.2.CELLO –This sound of a solo cello includes the cello’s natural vibrato.3.STRINGS–Presenting the sound of a small four-piece string section, includingnatural vibrato.4.FLUTES–This preset presents the classic solo flute sound heard on manyrecordings.5.CLARINET –This sound of a solo clarinet sounds great both as a solo (playedmonophonically) instrument and when playing chords.6.SAXOPHONE – This funky vintage British solo saxophone sound is perfect forplaying Beatles-like rock lines. It blends great with an overdriven guitar.7.BRASS –This preset is a trumpet-like sound, and when playing chords itproduces a great brass section sound. As noted earlier, the ATTACK and SUSTAIN knobs work differently for this preset than for other presets. The ATTACK knob controls a filter sweep for brass synthesizer sounds and the SUSTAIN knob adds the “lip buzz” characteristic of trumpet/brass sounds.8.LOW CHOIR –This sound is a full low-voiced choir made up of many voices.9.HIGH CHOIR –This sound is a higher-voiced choir made up of many voices.NOTES AND SPECIFICATIONS•Buffered bypass•Input impedance: 1MΩ•Output impedance (for both output jacks): 500Ω•Current draw: 100mATIPS ON GETTING OPTIMUM PERFORMANCE FROM THE MEL91.The MEL9 is generally best used as the first pedal in an effects chain. Placemodulation, delay, and reverb effects after the MEL9. The unit will not perform well if placed in the effects loop of a guitar amp.2.If a guitar’s pickup has a weak output, performance can be improved by puttinga clean boost or a compressor in front of the MEL9. Avoid placing a distortion oroverdrive in front of the MEL9. Placing distortion or overdrive in front of theMEL9 will muddy up the input signal and cause the tracking to be unstable. If you want to add overdrive or distortion, place it after the MEL9.3.The MEL9 tracking response is limited depending on the preset chosen, and thetype of electronic instrument you use to trigger the effect. On guitar, the usable range for these sounds goes up to about the 23rd fret on the high-E for some presets, and to only the 16th fret for others. On bass guitar, the MEL9 tracks only about as low as the open A-string.4.The MEL9 imitates Mellotron® sounds, so the MEL9 will only sound as real forany of the nine instruments as the Mellotron® does. For example, the FLUTEpreset is the same as the Mellotron’s flute which is a recording of a real flute.5.Pay attention to performance gestures (vibrato, trills, slides, and so on) and thesettings for ATTACK and SUSTAIN. If you want to mimic a Mellotron®, playpianistically with as little guitar inflection as possible. If you want to simulate an actual sound such as a cello, adapt your performance gestures to help mimic the actual sound. Otherwise, let your creativity guide your approach to playing the MEL9. And that means you should feel free to go wild by combining atypicalperformance techniques with traditional sounds. So what if an actual clarinetdoes not let you bend a note up a whole tone or more? Now you can go for it!- WARRANTY INFORMATION -Please register online at /product-registration or complete and return the enclosed warranty card within 10 days of purchase. Electro-Harmonix will repair or replace, at its discretion, a product that fails to operate due to defects in materials or workmanship for a period of one year from date of purchase. This applies only to original purchasers who have bought their product from an authorized Electro-Harmonix retailer. Repaired or replaced units will then be warranted for the unexpired portion of the original warranty term.If you should need to return your unit for service within the warranty period, please contact the appropriate office listed below. Customers outside the regions listed below, please contact EHX **************************************************************+1-718-937-8300. USA and Canadian customers: please obtain a Return Authorization Number (RA#) from EHX Customer Service before returning your product. Include with your returned unit: a written description of the problem as well as your name, address, telephone number, e-mail address, and RA#; and a copy of your receipt clearly showing the purchase date.United States & CanadaEHX CUSTOMER SERVICEELECTRO-HARMONIXc/o NEW SENSOR CORP.47-50 33RD STREETLONG ISLAND CITY, NY 11101Tel: 718-937-8300Email:************EuropeJOHN WILLIAMSELECTRO-HARMONIX UK13 CWMDONKIN TERRACESWANSEA SA2 0RQUNITED KINGDOMTel: +44 179 247 3258Email:*********************************This warranty gives a purchaser specific legal rights. A purchaser may have even greater rights depending upon the laws of the jurisdiction within which the product was purchased.To hear demos on all EHX pedals visit us on the web at Email us at ************FCC COMPLIANCENote: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.Modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment under FCC rules.。

Eaton 199099Eaton Moeller® series Rapid Link - Reversing starter, 6.6 A,Sensor input 2, AS-Interface®, S-7.4 for 31 modules, HAN Q4/2,with manual override switchGeneral specificationsEaton Moeller® series Rapid LinkReversing starter199099120 mm270 mm220 mm1.8 kg IEC/EN 60947-4-2CCCUL approvalCERoHSUL 60947-4-2Assigned motor rating: for normal internally and externally ventilated 4 pole, three-phase asynchronous motors with 1500 rpm at 50 Hz or 1800 min at 60 Hz RAMO5-W200A31-412RS1Product Name Catalog NumberProduct Length/Depth Product Height Product Width Product Weight CertificationsCatalog Notes Model CodeIs the panel builder's responsibility. The specifications for the switchgear must be observed.3 kW6.6 A (at 150 % Overload)480 V AC, 3-phase400 V AC, 3-phase10000 A0 VMeets the product standard's requirements.Is the panel builder's responsibility. The specifications for the switchgear must be observed.Does not apply, since the entire switchgear needs to be evaluated.0 kW2.238 kWMeets the product standard's requirements.0 V-40 °CThermo-clickTwo sensor inputs through M12 sockets (max. 150 mA) for quick stop and interlocked manual operationKey switch position OFF/RESET Generation change from RA-MO to RAMO 4.0Generation Change RASP4 to RASP5Generation change RAMO4 to RAMO5Generation change from RA-SP to RASP 4.0Configuration to Rockwell PLC for Rapid LinkGeneration Change RA-SP to RASP5Rapid Link 5 - brochureDA-SW-drivesConnect - InstallationshilfeDA-SW-Driver DX-CBL-PC-3M0DA-SW-USB Driver PC Cable DX-CBL-PC-1M5DA-SW-drivesConnect - installation helpDA-SW-drivesConnectDA-SW-USB Driver DX-COM-STICK3-KITMaterial handling applications - airports, warehouses and intra-logistics ETN.RAMO5-W200A31-412RS1.edzIL034084ZUramo5_v11.stpramo5_v11.dwgDA-DC-00004184.pdfDA-DC-00004525.pdfDA-DC-00003964.pdfDA-DC-00004523.pdfeaton-bus-adapter-rapidlink-speed-controller-dimensions-002.eps eaton-bus-adapter-rapidlink-reversing-starter-dimensions-003.eps eaton-bus-adapter-rapidlink-reversing-starter-dimensions-002.eps eaton-bus-adapter-rapidlink-speed-controller-dimensions-003.eps10.11 Short-circuit ratingRated operational power at AC-3, 380/400 V, 50 HzInput currentRated operational voltageRated conditional short-circuit current, type 1, 480 Y/277 V Rated control supply voltage (Us) at AC, 50 Hz - min10.4 Clearances and creepage distances10.12 Electromagnetic compatibility10.2.5 LiftingRated power at 575 V, 60 Hz, 3-phaseRated power at 460 V, 60 Hz, 3-phase10.2.3.1 Verification of thermal stability of enclosures Rated control supply voltage (Us) at DC - minAmbient storage temperature - minFitted with:Applikasjonsmerknader BrosjyrereCAD model Installeringsinstruksjoner mCAD model SertifiseringsrapporterTegningerElectronic motor protectionKey switch position HANDManual override switchKey switch position AUTOThermistor monitoring PTCShort-circuit releaseOverload cycleAC-53aNumber of pilot lightsRated control supply voltage (Us) at AC, 50 Hz - max0 VSystem configuration typeAC voltagePhase-earthed AC supply systems are not permitted. Center-point earthed star network (TN-S network)10.8 Connections for external conductorsIs the panel builder's responsibility.Coordination class (IEC 60947-4-3)Class 1Rated conditional short-circuit current, type 1, 600 Y/347 V 0 ARated conditional short-circuit current (Iq)10 kAAmbient operating temperature - max55 °CRated operational power at AC-3, 220/230 V, 50 Hz0 kWClimatic proofingIn accordance with IEC/EN 50178< 95 %, no condensationFeaturesParameterization: FieldbusDiagnostics and reset on device and via AS-Interface Parameterization: drivesConnectParameterization: drivesConnect mobile (App) Parameterization: KeypadLifespan, electrical10,000,000 Operations (at AC-3)Number of command positions2Electrical connection type of main circuitPlug-in connectionElectrical connection type for auxiliary- and control-current circuit Plug-in connectionRated control supply voltage (Us) at DC - max0 V10.9.3 Impulse withstand voltageIs the panel builder's responsibility.Ambient operating temperature - min-10 °C10.6 Incorporation of switching devices and componentsDoes not apply, since the entire switchgear needs to be evaluated.Current limitation0.3 - 6.6 A, motor, main circuitAdjustable, motor, main circuitCable length10 m, Radio interference level, maximum motor cable length10.5 Protection against electric shockDoes not apply, since the entire switchgear needs to be evaluated.Mounting positionVerticalMains switch-on frequencyMaximum of one time every 60 secondsClassCLASS 10 A10.13 Mechanical functionThe device meets the requirements, provided the information in the instruction leaflet (IL) is observed.10.2.6 Mechanical impactDoes not apply, since the entire switchgear needs to be evaluated.10.9.4 Testing of enclosures made of insulating materialIs the panel builder's responsibility.10.3 Degree of protection of assembliesDoes not apply, since the entire switchgear needs to be evaluated.Electromagnetic compatibilityClass AVoltage typeDCProduct categoryMotor starterOverload release current setting - min0.3 ARated control voltage (Uc)24 V DC (-15 %/+20 %, external via AS-Interface® plug)Rated operational current (Ie)6.6 AAssigned motor power at 460/480 V, 60 Hz, 3-phase3 HPRated frequency - min47 HzNumber of auxiliary contacts (normally closed contacts)Rated conditional short-circuit current (Iq), type 2, 380 V, 400 V, 415 V0 APower consumption8 W10.2.3.2 Verification of resistance of insulating materials to normal heatMeets the product standard's requirements.10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effectsMeets the product standard's requirements.On-delay20 - 35 msLifespan, mechanical10,000,000 Operations (at AC-3)Rated operational current (Ie) at 150% overload6.6 AProtocolAS-Interface profile cable: S-7.4 for 31 modulesASIOverload release current setting - max6.6 A10.9.2 Power-frequency electric strengthIs the panel builder's responsibility.Overvoltage categoryIIIDegree of protectionIP65NEMA 12Rated frequency - max63 HzVibrationResistance: According to IEC/EN 60068-2-6Resistance: 57 Hz, Amplitude transition frequency on accelerationResistance: 6 Hz, Amplitude 0.15 mmResistance: 10 - 150 Hz, Oscillation frequencyRated operational power at 380/400 V, 50 Hz - max3 kWAmbient storage temperature - max70 °CShort-circuit protection (external output circuits)Type 1 coordination via the power bus' feeder unit, Main circuitRated control supply voltage (Us) at AC, 60 Hz - min0 V10.7 Internal electrical circuits and connectionsIs the panel builder's responsibility.Rated impulse withstand voltage (Uimp)4000 VConnectionConnections pluggable in power sectionOff-delay20 - 35 ms10.10 Temperature riseThe panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.FunctionsExternal reset possibleTemperature compensated overload protectionOutput frequency50/60 HzMains voltage tolerance380 - 480 V (-15 %/+10 %, at 50/60 Hz)Rated conditional short-circuit current (Iq), type 2, 230 V0 AInterfacesNumber of slave addresses: 31 (AS-Interface®) Specification: S-7.4 (AS-Interface®)Max. total power consumption from AS-Interface® power supply unit (30 V): 190 mATypeReversing starter10.2.2 Corrosion resistanceMeets the product standard's requirements.Supply frequency50/60 Hz, fLN, Main circuit10.2.4 Resistance to ultra-violet (UV) radiationMeets the product standard's requirements.10.2.7 InscriptionsMeets the product standard's requirements.Rated control supply voltage (Us) at AC, 60 Hz - max0 VRated operational current (Ie) at AC-3, 380 V, 400 V, 415 V6.6 ARated operational power at 380/400 V, 50 Hz - min0.09 kWModelReversing starterNumber of auxiliary contacts (normally open contacts)Shock resistance15 g, Mechanical, According to IEC/EN 60068-2-27, 11 ms, Half-sinusoidal shock 11 ms, 1000 shocks per shaftAltitudeMax. 2000 mAbove 1000 m with 1 % performance reduction per 100 m Max. 1000 mEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. Med enerett. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmedia。

404142434445464748515457586063686971感谢您购买Shimano电动轮ForceMaster 9000在使用本产品之前详细阅读此说明书并与渔轮一起妥善保管。

产 品 使 用 说 明书2 8 1113 151617 18192123 2729 3336373924678收线效果超群SUPER STOPPER II能够将抽竿的威力完全发挥出来。

9请继续看下一页101213在功能设定完成后，会返回菜单界面。

需要返回水深显示画面时，在菜单选中「水深画面へ」按确认按钮。

（确认按钮指按键区域中标有MENU的按钮，对应屏幕中的决定功能）※把默认设定更改后，即使重新启动电动轮也使用最新设定。

钓组在水面时的位置记录为0M。

3740在旧款产品A-RB培林的侧面配置了防生锈、以及防止盐分结晶化的素材就是S A-RB培林，这样在钓组落下时候保证了渔轮线杯将会比以往更轻量。

在乌贼钓的时候让钓组的下降性能有了飞跃性的提升，另外对电动轮来说较难以解决的浮游钓问题也能够完全解决。

另外渔轮出线部完全排出了卡线问题，使出线口实现了最好的出线平衡。

A-RB处理的培林当然也能够防锈，在海水使用的时候也能够对培林内部海水入侵造成的结晶化问题有一定的缓解能力。

Shielded Anti-Rust Bearings （ 防盐结晶化防生锈培林）保证了渔轮顺畅运作41电动收线结束后，设定成将鱼竿立起就能把钓组拿到手中。

※初次使用船沿自动停止功能时，会在6m的位置启动。

第二次开始后，系统会自动记忆上次鱼竿停止5秒以上的位置。

（这个功能会在1m-6m的范围内启动，水深显示不满1m时，会被系统判定为1m）。

※（Spool Free）浮游钓模式下，防止收线过度的程序会启动，自动设定的船沿停止功能不会启动，将会在离手比较远的地方停止收线。

电动收线结束后，将鱼竿立起就能把钓组拿到手中。

可以选择上部开始或底部开始的方式来锁定钓层。

Series 910DualTrans™ MicroPirani/AbsolutePiezo TransducerDesigned specifically for wide-range pressure measurement applications, the Series 910Transducer combines Piezo and MicroPirani™ sensor technologies. The combined outputprovides significantly higher accuracy, stability, repeatability and a faster response time thanconventional thermal conductivity gauges.The 910 combines two pressure measurement technologies to provide superior performanceand functionality. The 910 provides gas independent absolute pressure measurement from 11 to1500 Torr with increased accuracy over thermal conductivity sensors.Unlike traditional Pirani gauges, the sensor element in the MicroPirani is made of a one millimetersquare silicon chip, allowing the measurements to be made in a very small volume. As a result ofTorr, two decades below astandard Pirani sensor. The sensor design minimizes the effects of convection, subsequently theApplicationsThe 910 Transducer allows the user tocombine multiple gauges into a single,compact package. This not only savescost, but can simplify the operation anddesign of their system. The wide rangemeasurement capability and availableon-board relays allow for a high level offunctionality in an extremely small footprint.The 910 can be used on any vacuumchamber requiring absolute pressuremeasurement and switching capabilities.The Piezo is an absolute pressure sensor, providing a direct pressure reading, allowing the measurement to be gas independent. The Piezo sensor measures from less than 1 Torr to 1500 Torr.The 910 has RS232 or RS485 digital communication interface for setup of transducer parameters and to provide real time pressure measurement.The 910 also has an analog pressure output of 1VDC/decade that can be interfaced to external analog equipment forpressure readout or control. Other analog outputs and curves can be selected via the digital user interface.The 910 has up to three mechanical relays which can be used for process control, for example interlocking isolation valves and vacuum pumps. Each set point can be assigned either to the piezo measurement or the combined absolute MicroPirani/Piezo measurement. The 910 compact design significantly reduces the amount of space occupied by a vacuum gauge. This is particularly appealing to systemdesigners and allows for a more compact vacuum system.Dimensional DrawingNote: Unless otherwise specified, dimensions are nominal values in inches (mm referenced).PinoutsThree (3) set point relays and dual AoutStandard Analog OutputPressure vs VoltageSpecificationsSensor Type 1 MicroPirani (MEMS Thermal Conductivity) Type 2Piezo absolute (MEMS diaphragm)Measuring Range Absolute 1.0 x 10-5 Torr to 1500 Torr Set Point Range Absolute 5.0 x 10-4 Torr to 1500 TorrCalibration Gas Air, Argon, Helium, Nitrogen, H 2, H 2O vapor, CO 2, Xenon, NeonGas independent above 11 Torr Operating Temperature Range 0° to 40°C (32° to 104°F)Maximum Bakeout Temperature 85°C (185°F), non-operating Digital CommunicationRS485/RS232 (4800 to 230400 Baud) Controls Zero adjust, span adjust, analog output, pressure units, baud rate, address, factory default, set point functions: value, hysteresis, direction, enable, transducer status, switch, LED test Status Pressure reading, units, set point, operating time, transducer temperature, user tag,model, device type, serial number, firmware and hardware versions, part number, manufacturer Analog Output (Absolute Pressure) 1 to 9.2 VDC, 1 VDC/decade, 100W maximum output impedance The 910 has a standard 15 pin HD SUBD connector and an analog output voltage pressure signal of 1VDC/decade. It can also emulate analog voltage outputs from a variety of other vacuum transducers. The emulation feature can be used to upgrade and replace other vendors’ gauges inOEM applications without changing system software. Contact MKS technical support for details.Analog Output Resolution 16 bitRelays (Optional)910 - 3 relays SPDT Relay Contact Rating 1 A @ 30VAC/DC, resistive Relay Response 100 msec maximumPower Requirements 9 to 30 VDC, < 1.2 watts max Accuracy (1) 5 x 10-4 to 1 x 10-3 Torr ±10% of Reading1 x 10-3to 11 Torr ±5% of Reading11 to 1000 Torr ±0.75% of Reading Repeatability (1) 5 x 10-4 to 10-3 Torr ±8% of Reading 10-3 Torr to 11 Torr ±2% of Reading11 to 1000 Torr ±0.2% of Reading Overpressure Limit 2250 Torr (Absolute)Installation Orientation Any Internal Volume (KF16)2.8 cm 3Materials Exposed to Vacuum Silicon, SiO 2, Si 3N 4, gold, low outgassing epoxy resin, 304 stainless steel, Viton ®Electronic Casing and Flange 304 stainless steel Weight (with KF 16 Flange) 170 g ComplianceCENote: (1)Accuracy and repeatability are typical values measured with Nitrogen gas at ambient temperature after zero adjustment.Ordering InformationOrdering Code Example: 910-11030Code Configuration910 with DisplayThe optional integrated touch-screen display is user configurable; the user can change pressure units, orientation and has access to set point parameters, gas type, and status of available set point relays. Displayed pressure reading from individual sensors or combined reading can be seen from >5 meters away on the high contrast display.PDR900 Power Supply and DisplayThe PDR900 power supply and readout unit is a stand alone, singlechannel controller for use with the Series 900 digital vacuum transducers. It can be used as a stand-alone power supply readout unit or as a tool for configuration, calibration and diagnostics of system integrated transducers in OEM applications.+1-978-645-5500 I +1-800-227-8766MKS products provided subject to the US Export Regulations. Export, re-export, diversion or transfer contrary to US law (and local country law) is prohibited.mksinst ™, MicroPirani ™ and DualTrans ™ are trademarks of MKS Instruments, Inc., Viton ® is a registered trademark of E.I. DuPont Company, VCR ® is a registered trademark of Swagelok Co. U.S. Patent No. 6,672,171. Other patents pending910_01/20©2020 MKS Instruments, Inc.Specifications are subject to change without notice.。

AMM⼿册查询教材R1AMM⼿册查询1AMM⼿册概述1.1 ⽤途飞机维护⼿册(Aicraft Maintenance Manual，AMM)提供航线和定检维护时所需要的详细技术信息，包含系统及部件的⼯作描述、勤务、修理、更换、调节、检查的必需信息和正常在停机坪或维护机库完成飞机检查所需要的⼯具设备。

该⼿册可以⽤来满⾜维修⼈员⼯作和培训的需要。

1.2 ⼿册有效性1.2.1客户化⼿册任何维修⽂件都有有效性(Effectivity)，也就是此⽂件的适⽤性，即该维修⽂件是针对哪种机型制定的，对哪些飞机有效。

⼀般定义为：维修⽂件的有效性是指该⽂件是否适⽤于指定飞机及机载设备的依据。

维修⽂件对应飞机的有效性可以体现在以下4个⽅⾯：客户化(机型、机队有效性)、飞机型别号码(单架飞机的有效性)、型别特征(装备系统、APU、发动机的有效性)、时效性(⼿册改版的有效性)。

AMM⼿册为客户化的⼿册。

通过FSN（机队序列号）来确定有效性。

1.2.2飞机识别号⼀架飞机从设计、实验、成批的⽣产到投⼊运⾏，过程是⾮常复杂的，也是⾮常严谨的，每⼀个过程都会有⼀些代表该过程的编号，这些编号⽤以对机型进⾏识别，同时，也⽤来确定各类⼿册、服务通告、适航指令等的有效性。

在各⼿册前⾔都有飞机有效性对照表，以⽅便⽤户查询⼿册时了解⼿册有效性。

1.2.3空客飞机有效性对照表A.机队序列号(Fleet Serial Number，FSN) 航空公司机队的飞机按照顺序编号，如：001、002。

B.飞机构型(Version Rank) 如：G8E01 0010、G8E01 0011。

C.飞机型号(Model) 如：320-214。

D.⼚家序列号(Manufacturer Serial Number，MSN) 某⼀机型持续⽣产的编号，如：0772、0799。

E.注册登记号(Registration)如：B-2360、B-2361。

1.2.4⼿册修订AMM⼿册修订分为：定期修订临时修订TR临时修订的内容包含在List of Effective Temporary Revisions（LETR）中，客户可以通过Airbus-World 和CD的形式获得最新的临时修订，在收到临时修订后应尽快将其上传⾄AirNav/Maintenance中。