本科毕业设计英文参考资料
题目Programmable Logic
Controller PLC
院系
专业
姓名
学号
学习年限
指导教师
申请学位
英文原文：
Programmable Logic Controller PLC
1 PLC Introduce
PLC Introduction Programmable controller is the first in the late 1960s in the United States, then called PLC programmable logic controller (Programmable Logic Controller) is used to replace relays. For the implementation of the logical judgment, timing, sequence number, and other control functions. The concept is presented PLC General Motors Coroperation.PLC and the basic design is the computer functional improvements, flexible, generic and other advantages and relay control system simple and easy to operate, such as the advantages of cheap prices combined controller hardware is standard and overall. According to the practical application of target software in order to control the content of the user procedures memory controller, the controller and connecting the accused convenient target. In the mid-1970s, the PLC has been widely used as a central processing unit microprocessor, import export module and the external circuits are used, large-scale integrated circuits even when the PLC is no longer the only logical (IC) judgment functions also have data processing, PID conditioning and data communications functions. International Electro technical Commission (IEC) standards promulgated programmable controller for programmable controller draft made the following definition: programmable controller is a digital electronic computers operating system, specifically for applications in the industrial design environment. It used programmable memory, used to implement logic in their internal storage operations, sequence control, timing, counting and arithmetic operations, such as operating instructions, and through digital and analog input and output, the control of various types of machinery or production processes. Programmable controller and related peripherals, and industrial control systems easily linked to form a whole, to expand its functional design. Programmable controller for the user, is non-contact equipment, the procedures can be changed to change production processes. The programmable controller has become a powerful tool for factory automation, widely popular
replication. Programmable controller is user-oriented industries dedicated control computer, with many distinctive features.
①high reliability, anti-interference capability;
②programming visual, simple;
③adaptability good;
④functional improvements, strong functional interface.
Programmable Logic Controllers (PLC), a computing device invented by Richard E. Morley, have been widely used in industry including manufacturing systems, transportation systems, chemical process facilities, and many others. At that time, the PLC replaced the hardwired logic with soft-wired logic or so-called relay ladder logic (RLL), a programming language visually resembling the hardwired logic, and reduced thereby the configuration time from 6 months down to 6 days.
Although PC based control has started to come into place, PLC based control will remain the technique to which the majority of industrial applications will adhere due to its higher performance, lower price, and superior reliability in harsh environments. Moreover, according to a study on the PLC market of Frost and Sullivan, an increase of the annual sales volume to 15 million PLC per year with the hardware value of more than 8 billion US dollars has been predicted, though the prices of computing hardware is steadily dropping. The inventor of the PLC, Richard E Morley, fairly considers the PLC market as a 5-billion industry at the present time.
Though PLC are widely used in industrial practice, the programming of PLC based control systems is still very much relying on trial-and-error. Alike software engineering, PLC software design is facing the software dilemma or crisis in a similar way. Morley himself emphasized this aspect most forcefully by indicating: “If houses were built like software projects, a single woodpecker could destroy civilization.”
Particularly, practical problems in PLC programming are to eliminate software bugs and to reduce the maintenance costs of old ladder logic programs. Though the hardware costs of PLC are dropping continuously, reducing the scan time of the ladder logic is still an issue in industry so that low-cost PLC can be used.
In general, the productivity in generating PLC is far behind compared to other domains, for instance, VLSI design, where efficient computer aided design tools are in practice.
Existent software engineering methodologies are not necessarily applicable to the PLC based software design because PLC-programming requires a simultaneous consideration of hardware and software. The software design becomes, thereby, more and more the major cost driver. In many industrial design projects, more than 50% of the manpower allocated for the control system design and installation is scheduled for testing and debugging PLC programs.
In addition, current PLC based control systems are not properly designed to support the growing demand for flexibility and reconfigure ability of manufacturing systems.
PLC is well-adapted to a range of automation tasks. These are typically industrial processes in manufacturing where the cost of developing and maintaining the automation system is high relative to the total cost of the automation, and where changes to the system would be expected during its operational life. PLC contains input and output devices compatible with industrial pilot devices and controls; little electrical design is required, and the design problem centers on expressing the desired sequence of operations. PLC applications are typically highly customized systems so the cost of a packaged PLC is low compared to the cost of a specific custom-built controller design. On the other hand, in the case of mass-produced goods, customized control systems are economic due to the lower cost of the components, which can be optimally chosen instead of a "generic" solution, and where the non-recurring engineering charges are spread over thousands or millions of units.
For high volume or very simple fixed automation tasks, different techniques are used. For example, a consumer dishwasher would be controlled by an electromechanical cam timer costing only a few dollars in production quantities.
A microcontroller-based design would be appropriate where hundreds or thousands of units will be produced and so the development cost (design of power supplies, input/output hardware and necessary testing and certification) can be spread over many sales, and where the end-user would not need to alter the control. Automotive applications are an example; millions of units are built each year, and very few end-users alter the programming of these controllers. However, some specialty vehicles such as transit busses economically use PLC instead of custom-designed controls, because the volumes are low and the development cost would be uneconomic.
Very complex process control, such as used in the chemical industry, may require
algorithms and performance beyond the capability of even high-performance PLC. Very high-speed or precision controls may also require customized solutions; for example, aircraft flight controls.
Programmable controllers are widely used in motion control, positioning control and torque control. Some manufacturers produce motion control units to be integrated with PLC so that G-code (involving a CNC machine) can be used to instruct machine movements.
PLC may include logic for single-variable feedback analog control loop, a "proportional, integral, derivative" or "PID controller". A PID loop could be used to control the temperature of a manufacturing process, for example. Historically PLC was usually configured with only a few analog control loops; where processes required hundreds or thousands of loops, a distributed control system (DCS) would instead be used. As PLC has become more powerful, the boundary between DCS and PLC applications has become less distinct.
PLC has similar functionality as Remote Terminal Units. An RTU, however, usually does not support control algorithms or control loops. As hardware rapidly becomes more powerful and cheaper, RTU, PLC and DCS are increasingly beginning to overlap in responsibilities, and many vendors sell RTU with PLC-like features and vice versa. The industry has standardized on the IEC 61131-3 functional block language for creating programs to run on RTU and PLC, although nearly all vendors also offer proprietary alternatives and associated development environments.
2 The structure of PLC system
Structurally divides, PLC divides into the stationary type and the combined type (module type) two kinds. Stationary PLC including the CPU board, the I/O board, demonstrated the kneading board, the memory block, the power source and so on; these elements combine not a dismountable whole. Module type PLC including the CPU module, the I/O module, the memory, the power source module, the ledger wall or the rack, these modules may defer to certain rule combination disposition.
1、CPU constitution
CPU is the PLC core, plays nerve center's role, wraps PLC to have CPU at least every time, it the function which entrusts with according to the PLC system program receives and
stores the user program and the data, with scanning way gathering the condition or the data which sends by the scene input device, coexisting enters the stipulation in the register, simultaneously, diagnoses the power source and in the PLC internal circuit active status and the programming process grammatical error and so on. After enters the movement, one by one reads the instruction from the user program memory, the duty which stipulated according to the instruction produces the corresponding control signal again after the analysis, directs the related control circuit.
CPU mainly by the operator, controller, register and implementation of data link between them, control and state BUS, CPU unit also includes peripheral chips, bus interface and related circuitry. Memory is mainly used for storing programs and data, is an integral unit PLC.
In the user view, unnecessarily detailed analysis of the CPU's internal circuitry, but the working mechanism of the various parts, or should have sufficient understanding. CPU and the control work, which will read the instructions, directives and executive orders to explain. However, the pace of work from the vibration signals. Computing devices used for digital or logic operation, under the command of the controller work.
CPU speed and memory capacity are important parameters for PLC, which determines the pace of work PLC, I/O number and software capacity, etc., thereby limiting the control of the scale.
2、I/O modules
PLC interface with the electrical circuit is through the input and output section (I/O) completion. I/O module integrates the PLC's I/O circuits; the input register reflecting the input signal status, output point reflects the state of the output latch. Input module will transform electrical signals into digital signals into the PLC system, the output module opposite. I/O into digital input (DI), digital outputs (DO), analog input (AI), analog output (AO) modules.
3、Common I/O as follow
Switching capacity: voltage level by points, with 220V AC, 110V AC, 24VDC, by Way of isolation, there is isolation and transistor isolation relays.
Analog: by type of signal, a current type (4-20mA ,0-20mA), voltage (0-10V ,0-5V,-10-10V) and so on, by the precision points are 12bit, 14bit, 16bit, etc. .
In addition to these general-purpose IO, there are special IO modules, such as thermal resistance, thermocouple, pulse and other modules.
By I/O module specifications and to determine the number of points, I/O modules can be more or less, but the maximum number of CPU can be the basic configuration management capabilities, which by the largest floor or rack slot limit.
Power Modules
PLC power supply modules for the PLC to provide the power supply integrated circuits. Meanwhile, some of them for the work input circuit to provide 24V power supply. Power input types are: AC power (220V AC or 110V AC), DC power supply (commonly used to 24VDC).
Most modular PLC to use floor or rack, its role is to: electrical, the realization of the modules, so that the CPU can access all the modules on the floor, machinery and realize the connection between each module, so that each module constitutes a overall.
3 Installation and debugging Of PLC control system
Programming device: development and application programmer is the PLC to monitor the operation, inspection, maintenance indispensable device for programming, some system settings, monitor the PLC and the PLC control system working conditions, but it is not directly involved in field control run. PLC programmers are generally small hand-held programmer, the current general by the computer (running programming software) as programmer. That is, our system PC.
Human Machine Interface is the simplest indicators and buttons, the current LCD screen (or touch screen) type-one operator terminal has been widely applied by the computer (running the configuration software) as a very popular man-machine interface.
PLC communication network rely on advanced industrial network technology can quickly and efficiently collect, transfer of production and management of data. Therefore, the network automation system integration projects in the importance of more and more significant, even been suggested that the network is the controller's point of view argument.
PLC is a service specifically for the industrial production control device, usually do not need to take measures, it can be directly used in industrial environments. However, when the production environment is too harsh, especially strong electromagnetic interference, or
红外数据通信技术外文翻译文献(文档含中英文对照即英文原文和中文翻译) Infrared Remote Control System Abstract Red outside data correspondence the technique be currently within the scope of world drive extensive usage of a kind of wireless conjunction technique, drive numerous hardware and software platform support. Red outside the transceiver product have cost low, small scaled turn, the baud rate be quick, point to point SSL, be free from electromagnetism thousand Raos
etc. characteristics, can realization information at dissimilarity of the product fast, convenience, safely exchange and transmission, at short distance wireless deliver aspect to own very obvious of advantage. Along with red outside the data deliver a technique more and more mature, the cost descend, red outside the transceiver necessarily will get at the short distance communication realm more extensive of application. The purpose that design this system is transmit customer’s operation information with infrared rays for transmit media, then demodulate original signal with receive circuit. It use coding chip to modulate signal and use decoding chip to demodulate signal. The coding chip is PT2262 and decoding chip is PT2272. Both chips are made in Taiwan. Main work principle is that we provide to input the information for the PT2262 with coding keyboard. The input information was coded by PT2262 and loading to high frequent load wave whose frequent is 38 kHz, then modulate infrared transmit dioxide and radiate space outside when it attian enough power. The receive circuit receive the signal and demodulate original information. The original signal was decoded by PT2272, so as to drive some circuit to accomplish customer’s operation demand. Keywords: Infrared dray；Code；Decoding；LM386；Red outside transceiver 1 Introduction 1.1 research the background and significance Infrared Data Communication Technology is the world wide use of a wireless connection technology, by the many hardware and software platforms supported. Is a data through electrical pulses and infrared optical pulse switch between the wireless data transceiver technology.
机械设计 摘要：机器是由机械装置和其它组件组成的。它是一种用来转换或传递能量的装置，例如：发动机、涡轮机、车辆、起重机、印刷机、洗衣机、照相机和摄影机等。许多原则和设计方法不但适用于机器的设计，也适用于非机器的设计。术语中的“机械装置设计”的含义要比“机械设计”的含义更为广泛一些，机械装置设计包括机械设计。在分析运动及设计结构时，要把产品外型以及以后的保养也要考虑在机械设计中。在机械工程领域中，以及其它工程领域中，所有这些都需要机械设备，比如：开关、凸轮、阀门、船舶以及搅拌机等。 关键词：设计流程设计规则机械设计 设计流程 设计开始之前就要想到机器的实际性，现存的机器需要在耐用性、效率、重量、速度，或者成本上得到改善。新的机器必需具有以前机器所能执行的功能。 在设计的初始阶段，应该允许设计人员充分发挥创造性，不要受到任何约束。即使产生了许多不切实际的想法，也会在设计的早期，即在绘制图纸之前被改正掉。只有这样，才不致于阻断创新的思路。通常,还要提出几套设计方案，然后加以比较。很有可能在这个计划最后决定中,使用了某些不在计划之内的一些设想。 一般的当外型特点和组件部分的尺寸特点分析得透彻时，就可以全面的设计和分析。接着还要客观的分析机器性能的优越性，以及它的安全、重量、耐用性，并且竞争力的成本也要考虑在分析结果之内。每一个至关重要的部分要优化它的比例和尺寸，同时也要保持与其它组成部分相协调。 也要选择原材料和处理原材料的方法。通过力学原理来分析和实现这些重要的特性，如那些静态反应的能量和摩擦力的最佳利用，像动力惯性、加速动力和能量；包括弹性材料的强度、应力和刚度等材料的物理特性，以及流体润滑和驱动器的流体力学。设计的过程是重复和合作的过程，无论是正式或非正式的进行，对设计者来说每个阶段都很重要。 最后，以图样为设计的标准，并建立将来的模型。如果它的测试是符合事先要
英文原文出自《Advanced Technology Libraries》2008年第5期 Robot Robot is a type of mechantronics equipment which synthesizes the last research achievement of engine and precision engine, micro-electronics and computer, automation control and drive, sensor and message dispose and artificial intelligence and so on. With the development of economic and the demand for automation control, robot technology is developed quickly and all types of the robots products are come into being. The practicality use of robot products not only solves the problems which are difficult to operate for human being, but also advances the industrial automation program. At present, the research and development of robot involves several kinds of technology and the robot system configuration is so complex that the cost at large is high which to a certain extent limit the robot abroad use. To development economic practicality and high reliability robot system will be value to robot social application and economy development. With the rapid progress with the control economy and expanding of the modern cities, the let of sewage is increasing quickly: With the development of modern technology and the enhancement of consciousness about environment reserve, more and more people realized the importance and urgent of sewage disposal. Active bacteria method is an effective technique for sewage disposal，The lacunaris plastic is an effective basement for active bacteria adhesion for sewage disposal. The abundance requirement for lacunaris plastic makes it is a consequent for the plastic producing with automation and high productivity. Therefore, it is very necessary to design a manipulator that can automatically fulfill the plastic holding. With the analysis of the problems in the design of the plastic holding manipulator and synthesizing the robot research and development condition in recent years, a economic scheme is concluded on the basis of the analysis of mechanical configuration, transform system, drive device and control system and guided by the idea of the characteristic and complex of mechanical configuration,
文献出处：Borkar S, Koranne S. Study of Service Quality Management in Hotel Industry [J]. Pacific Business Review International, 2014, 6(9): 21-25. 原文 Study of Service Quality Management in Hotel Industry Borkar; Sameer Abstract It is an attempt to understand the role of quality improvement process in hospitality industry and effectiveness in making it sustainable business enterprise. It is a survey of the presently adopted quality management tools which are making the hotels operations better focused and reliable and meet the customer expectations. Descriptive research design is used to know the parameters of service quality management in hospitality industry. Exploratory research design is undertaken to dig out the service quality management practices and its effectiveness. Data analysis is done and presented; hypothesis is tested against the collected data. Since the industry continuously tries to improve upon their services to meet the levels of customer satisfaction; Study presents tools for continuous improvement process and how it benefits all the stake holders. It can be inferred from the study that the hotel implement continuous improvement process and quality management tools to remain competitive in the market. The study involves hotels of highly competitive market with limited number of respondents. This limits the study to hotel industry and has scope of including other hospitality service providers as well. Keywords:Customer Satisfaction, Perception, Performance Measurement, Continuous, Improvement Process. Introduction It has brought paradigm shifts in the operations of hospitality industry. The overall perspective of the industry is changed due to introduction of new techniques
用于多跳认知无线电网络的分布式网络编码控制信道 Alfred Asterjadhi等著 1 前言 大多数电磁频谱由政府机构长期指定给公司或机构专门用于区域或国家地区。由于这种资源的静态分配，许可频谱的许多部分在许多时间和/或位置未使用或未被充分利用。另一方面，几种最近的无线技术在诸如IEEE802.11，蓝牙，Zigbee之类的非许可频段中运行，并且在一定程度上对WiMAX进行操作;这些技术已经看到这样的成功和扩散，他们正在访问的频谱- 主要是2.4 GHz ISM频段- 已经过度拥挤。为了为这些现有技术提供更多的频谱资源，并且允许替代和创新技术的潜在开发，最近已经提出允许被许可的设备（称为次要用户）访问那些许可的频谱资源，主要用户未被使用或零星地使用。这种方法通常被称为动态频谱接入（DSA），无线电设备发现和机会性利用未使用或未充分利用的频谱带的能力通常称为认知无线电（CR）技术。 DSA和CR最近都引起了无线通信和网络界的极大关注。通常设想两种主要应用。第一个是认知无线接入（CW A），根据该认知接入点，认知接入点负责识别未使用的许可频谱，并使用它来提供对次用户的接入。第二个应用是我们在这个技术中研究的应用，它是认知自组织网络（CAN），也就是使用 用于二级用户本身之间通信的无许可频谱，用于诸如点对点内容分发，环境监控，安全性等目的，灾难恢复情景通信，军事通信等等。 设计CAN系统比CW A有更多困难，主要有两个原因。第一是识别未使用的频谱。在CW A中，接入点的作用是连接到互联网，因此可以使用简单的策略来推断频谱可用性，例如查询频谱调节器在其地理位置的频谱可用性或直接与主用户协商频谱可用性或一些中间频谱经纪人另一方面，在CAN中，与频谱调节器或主要用户的缺乏直接通信需要二级用户能够使用检测技术自己识别未使用的频谱。第二个困难是辅助用户协调媒体访问目的。在CW A中存在接入点和通常所有二级用户直接与之通信（即，网络是单跳）的事实使得直接使用集中式媒体接入控制（MAC）解决方案，如时分多址（TDMA）或正交频分多址（OFDMA）。相反，预计CAN将跨越多跳，缺少集中控制器;而对于传统的单通道多跳自组织网络而言，这个问题的几个解决方案是已知的，因为假设我们处理允许设备访问的具有成
外文翻译 英文原文 Belt Conveying Systems Development of driving system Among the methods of material conveying employed，belt conveyors play a very important part in the reliable carrying of material over long distances at competitive cost．Conveyor systems have become larger and more complex and drive systems have also been going through a process of evolution and will continue to do so．Nowadays，bigger belts require more power and have brought the need for larger individual drives as well as multiple drives such as 3 drives of 750 kW for one belt(this is the case for the conveyor drives in Chengzhuang Mine)．The ability to control drive acceleration torque is critical to belt conveyors’performance．An efficient drive system should be able to provide smooth，soft starts while maintaining belt tensions within the specified safe limits．For load sharing on multiple drives．torque and speed control are also important considerations in the drive system’s design. Due to the advances in conveyor drive control technology，at present many more reliable．Cost-effective and performance-driven conveyor drive systems covering a wide range of power are available for customers’ choices[1]. 1 Analysis on conveyor drive technologies 1．1 Direct drives Full-voltage starters．With a full-voltage starter design，the conveyor head shaft is direct-coupled to the motor through the gear drive．Direct full-voltage starters are adequate for relatively low-power, simple-profile conveyors．With direct fu11-voltage starters．no control is provided for various conveyor loads and．depending on the ratio between fu11-and no-1oad power requirements，empty starting times can be three or four times faster than full load．The maintenance-free starting system is simple，low-cost and very reliable．However, they cannot control starting torque and maximum stall torque；therefore．they are
中英文资料对照外文翻译 FEM Optimization for Robot Structure Abstract In optimal design for robot structures, design models need to he modified and computed repeatedly. Because modifying usually can not automatically be run, it consumes a lot of time. This paper gives a method that uses APDL language of ANSYS 5.5 software to generate an optimal control program, which mike optimal procedure run automatically and optimal efficiency be improved. 1）Introduction Industrial robot is a kind of machine, which is controlled by computers. Because efficiency and maneuverability are higher than traditional machines, industrial robot is used extensively in industry. For the sake of efficiency and maneuverability, reducing mass and increasing stiffness is more important than traditional machines, in structure design of industrial robot. A lot of methods are used in optimization design of structure. Finite element method is a much effective method. In general, modeling and modifying are manual, which is feasible when model is simple. When model is complicated, optimization time is longer. In the longer optimization time, calculation time is usually very little, a majority of time is used for modeling and modifying. It is key of improving efficiency of structure optimization how to reduce modeling and modifying time. APDL language is an interactive development tool, which is based on ANSYS and is offered to program users. APDL language has typical function of some large computer languages. For example, parameter definition similar to constant and variable definition, branch and loop control, and macro call similar to function and subroutine call, etc. Besides these, it possesses powerful capability of mathematical calculation. The capability of mathematical calculation includes arithmetic calculation, comparison, rounding, and trigonometric function, exponential function and hyperbola function of standard FORTRAN language, etc. By means of APDL language, the data can be read and then calculated, which is in database of ANSYS program, and running process of ANSYS program can be controlled.
互利共赢的供应商质量控制 前言 近年来，随着对供应链的重视，供应商管理正逐渐成为企业和学术界的关注对象，IS0９000族标准以及QS 9０00标准都对供应商的管理提出了相应的要求，与供应商管理有关的研究成果正逐渐增多，一些软件巨头也推出了供应商关系管理的软件，但是在这些研究成果和应用软件中，涉及到的供应商质量控制的内容只是一些最基本的要求，而供应商质量控制恰恰是供应商管理的最基本、最重要的内容。另一方而，质量管理界对质量控制的研究取得了大量的成果，遗憾的是这些成果大多依然局限于企业的内部控制，仅仅研究从企业内部各环节如何改善产品的质量，而基于供应链的角度来研究质量控制的成果尚不多见。因此，系统地研究经济全球化形势下供应商质量控制的理论与方法，将有助于推动我国企业产品质量的快速提高和供应链竞争优势的形成与巩固。 1、质量与企业共存 质量一直是一个随着时代的变化而不断变化的概念,人们对质量的认识也往往因关注点不同而有所不同。如，早在1908年，通用汽车公司的工程师们在皇家汽车俱乐部会员们的面前拆解了3辆凯迪拉克轿车，并把这些零件混在一起,而后从中选择零件重新组装成车，然后驾车绝尘而去。这令在场的会员极为震惊，认为凯迪拉克车质量之高令人惊叹。显然在当时，汽车零件具有互换性是一种了不起的质量特性,这也是福特公司的Ｎ型车和T型车取得辉煌成功的重要原因.时至今日，即使农用三轮车的零部件也具有极高的互换性，零部件的标准化和互换性已经是理所当然的事情，不再是吸引顾客的重要质量特性.可见质量的内涵是不断变化的.那么究竟什么是质量呢？ （１)市场竟争就是企业间对“顾客”的争夺，在日益激烈的“顾客"争夺战中，质量、价格、交付（交付日期、方式和手段）和服务是企业常用的四个法宝，其中质量是根本，离开质量其他三项将变得毫无意义，因此可以说质量己成为市场竞争的焦点.它反映了产品是否能够反映顾客需求、能否满足顾客需求，从面决定了产品的市场前途。有鉴于此，质量己成为一项全球性运动,世界上所有优秀企业无一不把质量作为企业战略的关键内容，从战略的角度来规划质量。 （2）对于企业经营者来说,认识到质量对企业的重要意义只是经营企业的第一步,重要的是如何利用科学的方法来保证产品和服务的质量，使顾客满意，来保证过程和工作的质量来获互利共炭的供应商质量控制得良好的业绩。 众所周知,企业管理是社会生产力发展到一定程度的历史产物,质量管理作为企业管理的组成部分,同样也是社会发展的客观要求，特别是顾客处于主导地位的今天,要使顾客满意，就必须有过硬的产品质量和服务质量，这就要求企业积极推行先进的质量管理理论与方法，不断进行质量管理创新. ２、企业与供应商质量控制 随着生产社会化的不断发展，企业的生产活动分工越来越细,专业化程度越来越强，促使生产技术水平越来越高,产品质量得到大幅度改善。通常，某一产品不可能由一个企业从最初的原材料开始加工直至形成顾客最终使用的产品，往往是通过多个企业分工协作来完成.另外，先进生产方式的广泛应用,如准时生产、敏捷制造、零库存等，使企业与供应商的关系愈加紧密，企业与供应商的关系也由单纯的买卖关系向互利共底的合作关系演变。 ISO 900０族标准自1987年诞生以来受到了世界各国的一致追捧,全球约５0多万家企业通过ISO90０1质量管理体系认证足以说明这套管理标准在引领国际管理潮流方面的巨大成功。在备受企业欢迎的新版标准ＩSO9000：2０00中，互利的供应商关系被作为八项质量管理原则之一，充分体现了供应商关系管理在企业经营实践中的作用和价值。企业要贯彻这一原则,就必须
5G无线通信网络中英文对照外文翻译文献(文档含英文原文和中文翻译)
翻译： 5G无线通信网络的蜂窝结构和关键技术 摘要 第四代无线通信系统已经或者即将在许多国家部署。然而，随着无线移动设备和服务的激增，仍然有一些挑战尤其是4G所不能容纳的，例如像频谱危机和高能量消耗。无线系统设计师们面临着满足新型无线应用对高数据速率和机动性要求的持续性增长的需求，因此他们已经开始研究被期望于2020年后就能部署的第五代无线系统。在这篇文章里面，我们提出一个有内门和外门情景之分的潜在的蜂窝结构，并且讨论了多种可行性关于5G无线通信系统的技术，比如大量的MIMO技术，节能通信，认知的广播网络和可见光通信。面临潜在技术的未知挑战也被讨论了。 介绍 信息通信技术（ICT）创新合理的使用对世界经济的提高变得越来越重要。无线通信网络在全球ICT战略中也许是最挑剔的元素，并且支撑着很多其他的行业，它是世界上成长最快最有活力的行业之一。欧洲移动天文台（EMO）报道2010年移动通信业总计税收1740亿欧元,从而超过了航空航天业和制药业。无线技术的发展大大提高了人们在商业运作和社交功能方面通信和生活的能力无线移动通信的显著成就表现在技术创新的快速步伐。从1991年二代移动通信系统(2G)的初次登场到2001年三代系统（3G）的首次起飞，无线移动网络已经实现了从一个纯粹的技术系统到一个能承载大量多媒体内容网络的转变。4G无线系统被设计出来用来满足IMT-A技术使用IP面向所有服务的需求。在4G系统中，先进的无线接口被用于正交频分复用技术（OFDM），多输入多输出系统（MIMO）和链路自适应技术。4G无线网络可支持数据速率可达1Gb/s的低流度，比如流动局域无线访问，还有速率高达100M/s的高流速，例如像移动访问。LTE系统和它的延伸系统LTE-A，作为实用的4G系统已经在全球于最近期或不久的将来部署。 然而，每年仍然有戏剧性增长数量的用户支持移动宽频带系统。越来越多的
. 轻型发动机设计方案 摘要： 在过去的一些年里，新一代汽车发动机燃油效率并不是像我们预料中的那样会有所降低。其原因：汽车重量的增加。通过对汽车发动机整车重量以及部分重量的分析知：曲轴箱作为一个单一部件具有潜在的可减少重量的部件，这篇论文讲述的是通过利用轻型材料和现代的设计手段减少发动机重量的方法。 将轻型材料应用于曲轴箱设计构思中包含着广泛的设计理念，这种设计理念就是尽最大可能利用被选材料所具有的可能性去减少汽车重量，以下我将详细的谈论关于直列式和V-型发动机特殊方法的构思，发动机重量减轻也可以利用中小型发动机来代替又大又重的发动机，现代技术以被应用于现存的发动机设计构思中从而增加发动机功率重量比，使发动机性能得到提高因此它的市场价值也得到提高。 新型轻型发动机设计方案中有一个重要方面就是与传统发动机设计理念相比要尽量减小发动机零部件数量，因为这样对于减少整车重量有着非常重要作用。 介绍： 汽车在生态方面和将来继续充当普通交通工具的要求已经显著提高尤其在美国和欧洲。通过合法的要求使那些有压力的顾客在这方面得到缓解。必需考虑到这样的事实，对于燃油的消耗，排放，回收在利用这些中心问题要有一个回应。 在过去的一些年里，汽车发动机的发展取的了进步，使发动机功率得到了显著的提高同时在降低发动机燃油消耗和排放方面已经付出巨大的努力。通过应用直喷，废气涡轮增压和多气门技术于柴油发动机中，使发动机的性能得到显著提高。 新车取代与在它之前所有具有相类似功能车时，其新车发动机工作效率的提高并不是通过对原有车的有效改进。整个交通工具工作效率停滞不前甚至降低的原因是在过去的十五年里增加了15%~20%的车辆（图1）。尽管轻型材料的使用不断增长以及设计者有意识的向轻型结构方面设计但是重量减轻却被其他方面所弥补。读者可以通过以下方面得知：多余的汽车外形 安全方面的改进
外文翻译 专业机械电子工程 学生姓名张华 班级 B机电092 学号 05 指导教师袁健
外文资料名称：Research，design and experiment of end effector for wafer transfer robot 外文资料出处：Industrail Robot：An International Journal 附件： 1.外文资料翻译译文 2.外文原文
晶片传送机器人末端效应器研究、设计和实验 刘延杰、徐梦、曹玉梅 张华译 摘要：目的——晶片传送机器人扮演一个重要角色IC制造行业并且末端执行器是一个重要的组成部分的机器人。本文的目的是使晶片传送机器人通过研究其末端执行器提高传输效率,同时减少晶片变形。 设计/方法/方法——有限元方法分析了晶片变形。对于在真空晶片传送机器人工作,首先,作者运用来自壁虎的超细纤维阵列的设计灵感研究机器人的末端执行器,和现在之间方程机器人的交通加速度和参数的超细纤维数组。基于这些研究,一种微阵列凹凸设计和应用到一个结构优化的末端执行器。对于晶片传送机器人工作在大气环境中,作者分析了不同因素的影响晶片变形。在吸收面积的压力分布的计算公式,提出了最大传输加速度。最后, 根据这些研究得到了一个新的种末端执行器设计大气机器人。 结果——实验结果表明, 通过本文研究应用晶片传送机器人的转换效率已经得到显着提高。并且晶片变形吸收力得到控制。 实际意义——通过实验可以看出,通过本文的研究,可以用来提高机器人传输能力, 在生产环境中减少晶片变形。还为进一步改进和研究末端执行器打下坚实的基础,。 创意/价值——这是第一次应用研究由壁虎启发了的超细纤维阵列真空晶片传送机器人。本文还通过有限元方法仔细分析不同因素在晶片变形的影响。关键词：晶片传送机器人末端执行器、超细纤维数组、晶片 1.介绍
关于企业质量管理文献综述 摘要：随着新世纪的到来，特别是我国加入WTO后，中国将进一步融入世界经济的主流，质量将成为我国广大企业抓住机遇、迎接严峻挑战的关键。要拓展海外市场，必须靠有竞争力的质量；要保护国内的市场，不再有高关税和政府的过渡保护，也要靠质量的较量。随着科学技术的进步，质量管理的理论和方法有了更大发展。本文综合了质量管理的发展历程，并简要评价，提出看法，以便为企业的质量管理和理论研究提供参考。 关键词：质量管理、管理改进 21世纪是质量的世纪”。随着经济全球化和信息革命的迅猛发展，竞争日益加剧。在“数量”问题已解决的今天，人们将越来越追求和依赖于高质量的产品和服务，而且质量的领域不断拓宽，生活的质量、环境的质量、文化的质量、经济增长的质量更加受到全社会的关注。质量已成为竞争的焦点，不仅关系到企业的生存发展，而且影响到国家经济实力的增强和民族的形象。质量已成为全球经济发展战略的核心问题。 一、质量管理理论的回顾 （一）、质量管理的发展阶段 （1）质量检验阶段（20世纪20-30年代） 生产力迅猛发展，生产过程分工细化、日益复杂，许多美国企业按照泰勒的管理模式，纷纷设立检验部门，使检验与生产分离开来，其最大特点为“事后把关”。（2）统计质量阶段（20世纪40-50年代） 早在20世纪20年代，美国贝尔实验室工程师休哈特就提出“控制与预防缺陷”的概念。主要是利用数理统计原理，预防产生废品并检验产品质量，在方式上由专业质量控制工程师和技术人员承担。但这种方法只是保证生产过程中的产品质量，而不能提高产品本身的质量。 （3）全面质量管理阶段（20世纪60年代至今） 美国的费根堡姆提出，“全面质量是为了能够在最经济的水平上，并考虑到充分满足顾客要求的条件下进行生产和提供服务，将企业各部门研制质量、维持质量和提高质量的活动构成为一体的一种有效体系”。 （二）、质量管理的理论流派 1、事后检验 20世纪，美国工程师泰勒提出“科学管理理论”，1911 年泰勒出版了专
中英文翻译 附件1：外文资料翻译译文 通用移动通信系统的回顾 1.1 UMTS网络架构 欧洲/日本的3G标准，被称为UMTS。 UMTS是一个在IMT-2000保护伞下的ITU-T 批准的许多标准之一。随着美国的CDMA2000标准的发展，它是目前占主导地位的标准，特别是运营商将cdmaOne部署为他们的2G技术。在写这本书时，日本是在3G 网络部署方面最先进的。三名现任运营商已经实施了三个不同的技术：J - PHONE 使用UMTS，KDDI拥有CDMA2000网络，最大的运营商NTT DoCoMo正在使用品牌的FOMA（自由多媒体接入）系统。 FOMA是基于原来的UMTS协议，而且更加的协调和标准化。 UMTS标准被定义为一个通过通用分组无线系统（GPRS）和全球演进的增强数据
技术（EDGE）从第二代GSM标准到UNTS的迁移，如图。这是一个广泛应用的基本原理，因为自2003年4月起，全球有超过847万GSM用户，占全球的移动用户数字的68％。重点是在保持尽可能多的GSM网络与新系统的操作。 我们现在在第三代（3G）的发展道路上，其中网络将支持所有类型的流量：语音，视频和数据，我们应该看到一个最终的爆炸在移动设备上的可用服务。此驱动技术是IP协议。现在，许多移动运营商在简称为2.5G的位置，伴随GPRS的部署，即将IP骨干网引入到移动核心网。在下图中，图2显示了一个在GPRS网络中的关键部件的概述，以及它是如何适应现有的GSM基础设施。 SGSN和GGSN之间的接口被称为Gn接口和使用GPRS隧道协议（GTP的，稍后讨论）。引进这种基础设施的首要原因是提供连接到外部分组网络如，Internet或企业Intranet。这使IP协议作为SGSN和GGSN之间的运输工具应用到网络。这使得数据服务，如移动设备上的电子邮件或浏览网页，用户被起诉基于数据流量，而不是时间连接基础上的数据量。3G网络和服务交付的主要标准是通用移动通信系统，或UMTS。首次部署的UMTS是发行'99架构，在下面的图3所示。 在这个网络中，主要的变化是在无线接入网络（RAN的）CDMA空中接口技术的引进，和在传输部分异步传输模式作为一种传输方式。这些变化已经引入，主要是为了支持在同一网络上的语音，视频和数据服务的运输。核心网络保持相对不变，主要是软件升级。然而，随着目前无线网络控制器使用IP与3G的GPRS业务支持节点进行通信，IP协议进一步应用到网络。 未来的进化步骤是第4版架构，如图4。在这里，GSM的核心被以语音IP技术为基础的IP网络基础设施取代。 海安的发展分为两个独立部分：媒体网关（MGW）和MSC服务器（MSS）的。这基本上是打破外连接的作用和连接控制。一个MSS可以处理多个MGW，使网络更具有扩展性。 因为现在有一些在3G网络的IP云，合并这些到一个IP或IP/ ATM骨干网是很有意义的（它很可能会提供两种选择运营商）。这使IP权利拓展到整个网络，一直到BTS(基站收发信台)。这被称为全IP网络，或推出五架构，如图五所示。在HLR/ VLR/VLR/EIR被推广和称为HLR的子系统（HSS）。 现在传统的电信交换的最后残余被删除，留下完全基于IP协议的网络运营，并
Manufacturing Engineering and Technology—Machining Serope kalpakjian；Steven R.Schmid 机械工业出版社2004年3月第1版 20.9 MACHINABILITY The machinability of a material usually defined in terms of four factors: 1、Surface finish and integrity of the machined part; 2、Tool life obtained; 3、Force and power requirements; 4、Chip control. Thus, good machinability good surface finish and integrity, long tool life, and low force And power requirements. As for chip control, long and thin (stringy) cured chips, if not broken up, can severely interfere with the cutting operation by becoming entangled in the cutting zone. Because of the complex nature of cutting operations, it is difficult to establish relationships that quantitatively define the machinability of a material. In manufacturing plants, tool life and surface roughness are generally considered to be the most important factors in machinability. Although not used much any more, approximate machinability ratings are available in the example below. 20.9.1 Machinability Of Steels Because steels are among the most important engineering materials (as noted in Chapter 5), their machinability has been studied extensively. The machinability of steels has been mainly improved by adding lead and sulfur to obtain so-called free-machining steels. Resulfurized and Rephosphorized steels. Sulfur in steels forms manganese sulfide inclusions (second-phase particles), which act as stress raisers in the primary shear zone. As a result, the chips produced break up easily and are small; this improves machinability. The size, shape, distribution, and concentration of these inclusions significantly influence machinability. Elements such as tellurium and selenium, which are both chemically similar to sulfur, act as inclusion modifiers in