当前位置:文档之家› 基于Cadna-A的高层建筑环境噪声垂直分布仿真

基于Cadna-A的高层建筑环境噪声垂直分布仿真

V ol 34No.3Jun.2014

噪声与振动控制NOISE AND VIBRATION CONTROL 第34卷第3期2014年6月文章编号:1006-1355(2014)03-0136-03

基于Cadna/A 的高层建筑环境噪声垂直分布仿真

娄金秀,马建华

(河南大学环境与规划学院,河南开封475004)

摘要:以开封市某住宅小区建筑物为例,利用Cadna/A 软件建立建筑物三维仿真模型,预测交通噪声在建筑物垂直方向的分布规律,并用实测数据对预测结果进行验证。结果表明Cadna/A 软件预测交通噪声的精度均在97%以上。昼间噪声A 声级随着建筑物高度的增加,呈先增加后减小的趋势,最大噪声高度约22m 。地面粗糙度的程度可有效降低不同高度的噪声的噪声级。本研究可为居民选择最佳居住楼层及城市主管部门噪声防治提供依据。

关键词:声学;高层建筑;噪声垂直分布;住宅小区;Cadna/A 软件中图分类号:X839.1

文献标识码:A

DOI 编码:10.3969/j.issn.1006-1335.2014.03.029

Simulation of Noise Vertical Distribution of High-rise Buildings

Using Cadna/A Software

LOU Jin-xiu ,MA Jian-hua

(College of Environment and Planning,Henan University,Kaifeng 475004,Henan China )

Abstract :Noise vertical distributions of high-rise buildings in a residential community in Kaifeng City are predicted using Cadna/A software on the basis of a 3D simulation model.Meanwhile,results of the simulation are checked up by the actually measured noise data.The results show that the accuracy of noise prediction by using Cadna/A software is higher than 97%.The noise increases at first and then decreases with the vertical distance from the ground increasing,and the maximum noise appears at 22m height from the ground.The surface roughness can cut down the noise intensity at different altitudes.The results have provided a scientific basis for urban noise control and a help for residents choosing the best residential floors of buildings.

Key words :acoustics ;high-rise building;noise vertical distribution ;residential community ;Cadna/A software

交通噪声是城市中最主要的噪声源。许多居民住宅楼和涉外饭店位于街道两侧,直接或间接受到交通噪声的影响[1]。城市环境噪声的监测与评价已有大量的工作,尤其是对城市交通噪声的监测与评价[2―4]。目前,我国对区域噪声的表达大多着重于平面分布上,且运用Kriging 插值法得到其噪声分布图。此方法绘制噪声分布图需要时间较长,实时性

收稿日期:2013-05-27

基金项目:国家自然科学基金项目:(41171409);

河南大学大学生创新性试验计划项目:(11NB038)

作者简介:娄金秀(1990-),女,学士,辽宁大连人,主要从事

环境影响评价研究。E-mail:732037629@https://www.doczj.com/doc/3114229412.html,

通讯作者:马建华,教授。

E-mail:mjh@https://www.doczj.com/doc/3114229412.html,

较差,且只能评价已有道路的噪声影响,难以弥补同步性、人力物力耗费大等方面的不足。而借助模型可以对拟建项目的降噪方案进行预测和评价,提高效率和节约成本,是今后噪声评价的发展方向[5]。各国相继开发了基于当地情况的道路交通噪声预测模型,并与计算机模拟技术相结合,客观地分析交通噪声对受体的影响[6]。在我国的噪声影响评价中,Cadna/A 软件被广泛认可,如郑庆峰等[7]以上海市为例,运用Cadna/A 软件得出噪声在垂直方向上的分布状况;李宪同等[8]以北京市为例,运用Cadna/A 软件预测噪声在建筑物立面上的分布情况。其研究对象均为大城市的噪声垂直分布,道路宽度大于40m ;对于中小城市来说,道路较窄,车流量较少,用Cadna/A 软件开展中小城市的噪声预测是否准确,噪声在建筑物立面上的分布情况如何,尚需进一步开展案例研究。本文以中小省市开封市为例,选择

相关主题
文本预览
相关文档 最新文档