透镜系列术语中英文对照
单透镜 Simple (Single) Lenses
球透镜 Ball Lenses
歪像透镜 Anamorphic Lenses
圆锥透镜 Conical Lenses
柱状透镜,环形透镜 Cylindrical & Toroidal Lenses
非球面透镜 Aspheric Lenses
反射折射透镜 Catadioptric Lenses
绕射极限透镜 Diffraction-Limited Lenses
GRIN透镜 GRIN Lenses (Graduated Refractive Index Rod)
微小透镜阵列 Micro Lens Arrays
准直透镜 Collimator Lenses
聚光透镜 Condenser Lenses
多影像透镜 Multiple Image Lenses
傅利叶透镜 Fourier Lenses
菲涅尔透镜 Fresnel Lenses
替续透镜 Relay Lenses
大口径透镜(直径150mm以上) Large Aperture Lenses (150mm) 复合透镜 Complex Lenses
红外线透镜 Infrared Lenses
紫外线透镜 Ultraviolet Lenses
激光透镜 Laser Lenses
望远镜对物镜 Telescope Objectives Lenses
显微镜对物镜 Microscope Objectives Lenses
接目镜 Eyepieces Lenses
向场透镜 Field Lenses
望远镜头 Telephoto Lenses
广角镜头 Wide Angle Lenses
可变焦伸缩镜头 Variable Focal Length Zoom Lenses
CCTV镜头 CCTV Lenses
影印机镜头 Copy Machine Lenses
传真机镜头 Facsimile Lenses
条码扫描器镜头 Bar Code Scanner Lenses
影像扫描器镜头 Image Scanner Lenses
光碟机读取头透镜 Pick-up Head Lenses
APS相机镜头 APS Camera Lenses
数位相机镜头 Digital Still Camera Lenses
液晶投影机镜头 Liquid Crystal Projector Lenses
镜面系列术语中英文对照
平面镜 Flat Mirrors
球面凹面镜,球面凸面镜 Spherical Concave and Convex Mirrors 抛物面镜,椭圆面镜 Off-Axis Paraboloids and Ellipsoids Mirrors 非球面镜 Aspheric Mirrors
多面镜 Polygonal Mirrors
热镜 Hot Mirrors
冷镜 Cold Mirrors
玻璃,玻璃/瓷面镜 Glass and Glass-Ceramic Mirrors
双色向面镜 Dichroic Mirror
金属面镜 Metal Mirrors
多层面镜 Multilayer Mirrors
半涂银面镜 Half-Silvered Mirrors
激光面镜 Laser Mirrors
天文用面镜 Astronomical Mirrors
棱镜系列术语中英文对照
Nicol棱镜 Nicol Prisms
Glan-Thomson棱镜 Glan-Thomson Prisms
Wollaston棱镜 Wollaston Prisms
Rochon棱镜 Rochon Prisms
直角棱镜 Right-Angle; Rectangular Prisms
五面棱镜 Pentagonal Prisms
脊角棱镜 Roof Prisms
双棱镜 Biprisms
直视棱镜 Direct Vision Prisms
微小棱镜 Micro Prisms
滤光镜系列术语中英文对照
尖锐滤光镜 Sharp Cut (off) Filters
色温变换滤光镜,日光滤光镜 Colour Conversion/Daylight Filters 干涉滤光镜 Interference Filters
中性密度滤光镜 Neutral Density Filters
空间/光学匹配滤光镜 Spatial/Optical Matched Filters
双色向滤光镜 Dichroic Filters
偏光滤光镜 Polarizing Filters
排除频带滤光镜 Rejection Band Filters
可调式滤光镜 Turnable Filter
超窄频滤光镜 Ultra Narrowband Filters
色吸收滤光镜 Absorption Filters
红外吸收/反射滤光镜 Infrared Absorbing/Reflecting Filters
红外透过滤光镜 Infrared Transmitting Filters
紫外吸收滤光镜 Ultraviolet Absorbing Filters
紫外透过滤光镜 Ultraviolet Transmitting Filters
针孔滤光镜 Pinhole Filters
有色玻璃滤光镜 Colored-Glass Filters
塑胶滤光镜 Plastic Filters
照像用滤光镜 Photographic Filters
全像滤光镜 Holographic Filters
微小干涉滤光镜 Micro Interference Filters
光学词汇
Iris – aperture stop虹膜孔径光珊
retina视网膜
Color Blind 色盲
weak color 色弱
Myopia – near-sighted 近视
Sensitivity to Light感光灵敏度
boost推进
lag behind落后于
Hyperopic – far-sighted 远视
Dynamic Range 动态围
critical fusion frequency 临界融合频率
CFF临界闪变频率
visual sensation视觉
Chromaticity Diagram色度图
Color Temperature色温
HSV Model色彩模型(hue色度saturation饱和度value纯度CIE Model 相干红外能量模式
Complementary Colors补色
Bar Pattern条状图形
Heat body 热稠化
approximate近似
violet紫罗兰
Body Curve人体曲线
Color Gamut色阶
adjacent邻近的
normal illumination法线照明
Primary colors红黄蓝三原色
Color saturation色饱和度
Color Triangle颜色三角
Color Notation颜色数标法
Color Difference色差
TV Signal Processing电视信号处理
Gamma Correction图像灰度校正
Conversion Tables换算表
out of balance失衡
wobble摇晃
back and forth前后
clear (white) panel白光板
vibrant震动
fuzzy失真
quantum leap量子越迁
SVGA (800x600)derive from起源自culprit犯人
render呈递
inhibit抑制,约束
stride大幅前进
blemish污点
obstruction障碍物
scratch刮伤
substance物质实质主旨
residue杂质
criteria标准
parameter参数
adjacent邻近的接近的asynchrony异步
cluster串群
mutually互助得
algorithm运算法则
Chromatic Aberrations色差
Fovea小凹
Visual Acuity视觉灵敏度Contrast Sensitivity对比灵敏度Temporal (time) Response反应时间rendition表演,翻译
animation活泼又生气
ghost重影
Parallax视差
deficient缺乏的不足的
Display panel显示板
NG.( Narrow Gauge)窄轨距dichroic mirror二色性的双色性的Brewster Angle布鲁斯特角Polarized Light极化光
Internal reflection反射Birefringence 双折射
Extinction Ratio 消光系数Misalignment 未对准
Quarter Waveplates四分之一波片blemish污点瑕疵
Geometric几何学的
ripple波纹
capacitor电容器
parallel平行的他
tantalum钽(金属元素) exsiccate使干燥
exsiccate油管,软膏
furnace炉子镕炉
electrolytic电解的,由电解产生的module模数
analog类似物
out of the way不恰当pincushion针垫拉
lateral侧面得
rectangle长方形
fixture固定设备
control kit工具箱
DVI connector DVI数局线Vertical垂直的
horizontal 水平的
interlace隔行扫描
mullion竖框直楞
sawtooth锯齿
toggle套索钉
keypad数字按键键盘tangential切线
diagnostic tool诊断工具
sagittal direction径向的
cursor position光标位置
ray aberration光线相差
weighting factor权种因子
variables变量
for now暂时,目前.眼下
check box复选框
Airy disk艾里斑
exit pupil出[射光]瞳
optical path difference光称差
with respect to关于
diffraction limited衍射极限wavefront aberration波阵面相差spherical aberration球面象差
paraxial focus傍轴焦点
chromatic aberration象差
local coordinate system局部坐标系统coordinate system坐标系
orthogonal直角得,正交的
conic sections圆锥截面
account for解决,得分
parabolic reflector拋物面反射镜radius of curvature曲率半径spherical mirror球面镜
geometrical aberration几何相差incident radiation入射辐射
global coordinate总体坐标
in terms of根据按照
reflected beam反射束
FYI=for your information供参考Constructive interference相长干涉phase difference相差
achromatic singlet消色差透镜Interferometer干涉仪
boundary constraint边界约束,池壁效应
radii半径
Zoom lenses变焦透镜
Beam splitters分束器
discrete不连续的,分离的
objective/eye lens物镜/目镜
mainframe主机
rudimentary根本的,未发展的
photographic照相得摄影得
taxing繁重的,费力得
algebra代数学
trigonometry三角学
geometry几何学
calculus微积分学
philosophy哲学
lagrange invariant拉格朗日不变量
spherical球的
field information场信息
Standard Lens标准透镜
Refracting Surface折射面
astigmatism散光
HDTV高清晰度电视
DLV ( Digital Light Valve)数码光路真空管,简称数字光阀diffraction grating衍射光珊
field angle角
paraxial ray trace equations近轴光线轨迹方称
back focal length后焦距
principal plane主平面
vertex顶点,最高点
astigmatism散光,因偏差而造成的曲解或错判
medial中间的,平均的
variance不一致
conic圆锥的,二次曲线
field of view视野
collimator瞄准仪
convolution回旋.盘旋,卷积
fuzzy失真,模糊
aberrated异常的
asymmetry不对称得
indicative可表示得
parabolic拋物线得
suffice足够,使满足
specification规格,说明书
straightforward易懂的,直接了当的
solidify凝固,巩固.
Constraints 约束,限制
metrology度量衡
field coverage视场,视野
dictate口述, 口授, 使听写, 指令, 指示, 命令, 规定irradiance发光, 光辉,辐照度
aerial空气得,空中得
halide卤化物的
monochromatic单色的,单频的
polychromatic多色的
aspherical非球面的
spherical球面的
alignment列队,结盟
power(透镜)放大率
equiconvergence 同等收敛
EFL(effective focal length)有效焦距
workhorse广为应用的设备
biconvex两面凸的
global optimization整体最优化
concave凹得,凹面得
cylindrical圆柱得
solid model实体模型
Modulation Transfer Function调制传递函数
in the heat of在最激烈的时候
protocol协议,规定
triplet三重态
sanity心智健全
zinc锌,涂锌的
selenide 硒化物,硒醚
miscellaneous各色各样混在一起, 混杂的, 多才多艺的
versus与...相对
polynomial多项式的
coefficient系数
explicit function显函数
distinct清楚的,截然不同的
emanate散发, 发出, 发源
rudimentary根本的,未发展的
intersection角差点
PRTE=paraxial ray trace equation旁轴光线轨迹方程achromats 消色差透镜cardinal points基本方位separations分色片dashed虚线blow up 放大overlay覆盖,覆盖图multiplayer 多层的humidity 湿度float glass 浮法玻璃square one 出发点,端点square up to 准备开打,坚决地面对reflecting telescope 反射式望远镜diagnostic tools诊断工具Layout plots规划图Modulation transfer function调制转换功能FFT快速傅里叶变换Point spread function点传播功能wavelength波长angle角度absorption吸收system aperture系统孔径lens units透镜单位wavelength range波长围singlet lens单业透镜spectrum光谱diffraction grating衍射光栅asphere半球的LDE=Lens data editor Surface radius of curvature表面曲率半径surface thickness表面厚度material type材料种类semi-diameter半径focal length焦距aperture type孔径类型aperture value孔径值field of view视场microns微米F, d, and C= blue hydrogen, yellow helium, red hydrogen lines, primary wavelength主波长sequential mode连续模式object surface物表面The front surface of the lens透镜的前表面stop光阑The back surface of the lens透镜的后表面The image surface像表面symmetric相对称的biconvex两面凸的The curvature is positive if the center of curvature of the surface is to the right of the vertex. It is negative if the center of curvature is to the left of the vertex.如果曲率中心在最高点的右边,曲率值为正,如果曲率中心在最
高点的左边,则曲率为负image plane像平面Ray Aberration光线相差tangential direction切线方向sagittal direction径向paraxial focus旁轴的Marginal边缘的spherical aberration球面像差Optimization Setup最优化调整variable变量mathematical sense数学角度MFE= Merit Function Editor, Adding constraints增加约束focal length焦矩长度operand操作数the effective focal length有效焦矩primary wavelength 主波长initiate开始spot diagram位图表Airy disk艾里斑axial chromatic aberration轴向色差with respect to关于至于exit pupil出射光瞳OPD=optical path difference光学路径差diffraction limited衍射极限chromatic aberration色差chromatic focal shift色焦距变换paraxial focus傍轴焦点axial spherical aberration轴向球差(longitudinal spherical aberration 纵向球差:沿光轴方向度量的球差)lateral spherical aberration垂轴球差(在过近轴光线像点A‵的垂轴平面度量的球
差)coma、comatic aberration彗差meridional coma子午彗差sagittal coma弧矢彗差astigmatism像散local coordinate system本地坐标系统meridional curvature of field子午场曲sagittal curvature of field弧矢场曲decentered lens偏轴透镜orthogonal直角的垂直的conic section圆锥截面account for说明,占有,得分stigmatic optical system无散光的光学系统Newtonian telescope牛顿望远镜parabolic reflector抛物面镜foci焦距chromatic aberration,色差superpose重迭parabola抛物线spherical mirror球面镜RMS=Root Mean Square均方根wavefront波阵面spot size光点直径Gaussian quadrature高斯积分rectangular array矩阵列grid size磨粒度PSF=Point Spread Function点扩散函数FFT=Fast Fourier Transform Algorithm快速傅里叶变换Cross Section横截面Obscurations昏暗local coordinates局部坐标系统vignette把…印为虚光照Arrow key键盘上的箭头键refractive折射reflective反射in phase 同相的协调的Ray tracing光线追迹diffraction principles衍射原理order effect式样提出的顺序效果energy distribution能量分配Constructive interference相长干涉dispersive色散的Binary optics二元光学phase advance相位提前achromatic single消色差单透镜diffractive parameter衍射参数Zoom lenses变焦透镜Athermalized lenses绝热透镜Interferometers干涉计Beam splitter分束器Switchable component systems可开关组件系统common application通用symmetry 对称boundary constraint边界约束multi-configuration (MC) MC Editor
(MCE) perturbation动乱,动摇index accuracy折射率准确性index homogeneity折射率同种性index distribution折射率分配abbe number 离差数Residual剩余的Establishing tolerances建立容差figure of merit 质量因子tolerance criteria公差标准Modulation Transfer Function (MTF)调制传递函数boresight视轴,瞄准线Monte Carlo蒙特卡洛Tolerance operands误差操作数conic constant ]MC1"{_qT .ueg g
圆锥常数astigmatic aberration像散误差Mechanical tilt机械倾斜,机械倾角Tolerance Data Editor (TDE)公差资料编辑器compensator补偿棱镜estimated system performance预估了的系统性能iteratively反复的,重迭的statistical dependence统计相关性sequential ray trace model 连续光线追迹模型imbed埋葬,埋入multiple多样的,多重的,若干的Non-Sequential Components不连续的组件Corner cube角隅棱镜,三面直角透镜Sensitivity Analysis灵敏度分析Faceted reflector有小面的反射镜emit发射,发出nest嵌套overlap交迭outer lens外透镜brute force强力seidel像差系数aspect ratio长宽比MRA边缘光线角MRH 边缘光线高度asynchronous不同时的,异步Apodization factor变迹因子hexapolar六角形dithered高频脉冲衍射调制传递函数(DMTF),衍射实部传递函数(DRTF),衍射虚部传递函数(DITF),衍射相位传递函数(DPTF),方波传递函数(DSWM)logarithmic对数的parity奇偶% Uc,I e ,17]3NnoC
longitudinal aberrations 纵向像差赛得系数: 球差(SPHA,SI),彗差(COMA,S2),像散(ASTI,S3),场曲(FCUR,S4),畸变(DIST,S5),轴向色差(CLA,CL)和横向色差(CTR,CT).
横向像差系数:横向球差(TSPH),横向弧矢彗差(TSCO),横向子午彗差(TTCO),横向弧矢场曲(TSFC),横向子午场曲(TTFC),横向畸变(TDIS)横向轴上色差(TLAC)。纵向像差系数: 纵向球差(LSPH),纵向像散(LAST),纵向匹兹凡场曲(LPFC),纵向弧矢场曲(LFCS),纵向子午场曲(LFCT)和纵向轴上色差(LAXC),横向像散(TAST) ,横向匹兹凡场曲(TPFC)纵向弧矢场曲(LSFC)纵向畸变(LDIS)波前系数: 球差(W040),彗差(W131),像散(W222),匹兹凡场曲(W220P),畸变(W311),轴向色离焦项(W020),轴向色倾斜(W111),弧矢场曲(W220S),平均场曲(W220M),子午场曲(W220T).彗差comatic aberration子午彗差meridional coma 弧矢彗差sagittal coma锤形优化(Hammer Optimization) 评价函数列
表(Merit Function Listing) 公差汇总表(Tolerance Summary) 套样板(Test Plate Fitting) 镜头库(Lens Catalogs) 等双凸/ 等双凹(equiconvex/equiconcave) 和双凸/ 双凹( biconvex/biconcave)。幻像发生器(Ghost Focus generator) Iris – aperture stop虹膜孔俓光珊retina视网膜Color Blind 色盲weak color 色弱3Ns>V5X]? jL3o33n-U] Myopia – near-sighted 近视Sensitivity to Light感光灵敏度boost推进lag behind落后于Hyperopia – far-sighted 远视Dynamic Range 动态围critical fusion frequency 临界融合频率CFF临界闪变频率visual sensation视觉Chromaticity Diagram色度图Color Temperature色温HSV Model色彩模型(hue色度saturation饱和度value纯度CIE Model 相干红外能量模式Complementary Colors补色Bar Pattern条状图形Heat body 热稠化approximate近似得violet紫罗兰Body Curve人体曲线Color Gamut色阶adjacent邻近的normal illumination法线照明Primary colors红黄蓝三原色Color saturation色饱和度Color Triangle 颜色三角Color Notation颜色数标法Color Difference色差TV Signal Processing电视信号处理Gamma Correction图像灰度校正;$UI`pHy m,jF2C;.W
Conversion Tables换算表out of balance失衡wobble摇晃back and forth 前后rd/}N, T$5[1]*!"Z~
clear (white) panel白光板vibrant震动fuzzy失真quantum leap量子越迁SVGA (800x600)derive from起源自culprit犯人render呈递inhibit 抑制,约束stride大幅前进blemish污点obstruction障碍物scratch刮伤速substance物质实质主旨residue杂质criteria标准parameter参数adjacent邻近的接近的asynchrony异步cluster串群mutually互助得algorithm运算法则Chromatic Aberrations色差Fovea小凹Visual Acuity视觉灵敏度Contrast Sensitivity对比灵敏度Temporal (time) Response反应时间rendition表演,翻译animation活泼又生气ghost重影Parallax视差deficient缺乏的不足的Display panel显示板
NG.( Narrow Gauge)窄轨距dichroic mirror二色性的双色性的Brewster Angle布鲁斯特角Polarized Light极化光Internal reflection反射Birefringence 双折射Extinction Ratio 消光系数Misalignment 未对准Quarter Waveplates四分之一波片blemish污点瑕疵Geometric几何学的ripple波纹capacitor电容器parallel平行的他tantalum钽(金属元素) exsiccate使干燥exsiccate油管,软膏furnace炉子镕炉electrolytic
电解的,由电解产生的module模数analog类似物out of the way不恰当pincushion针垫拉lateral侧面得rectangle长方形fixture固定设备control kit工具箱DVI connector DVI数局线Vertical垂直的horizontal 水平的interlace隔行扫描mullion竖框直楞sawtooth锯齿toggle套索钉keypad数字按键键盘tangential切线diagnostic tool诊断工具sagittal direction径向的cursor position光标位置ray aberration光线相差weighting factor权种因子variables变量for now暂时,目前.眼下check box复选框Airy disk艾里斑exit pupil出[射光]瞳optical path difference 光称差with respect to关于diffraction limited衍射极限
9MB#OvW ]L[FMjr
wavefront aberration波阵面相差spherical aberration球面象差paraxial focus傍轴焦点chromatic aberration象差local coordinate system局部坐标系统coordinate system坐标系orthogonal直角得,正交的conic sections圆锥截面|6\'5"tH zj"\p{t&
account for解决,得分parabolic reflector拋物面反射镜radius of curvature曲率半径spherical mirror球面镜geometrical aberration几何相差incident radiation入射辐射global coordinate总体坐标in terms of 根据按照-hozJ z F j
<9=
reflected beam反射束FYI=for your information供参考Constructive interference相长干涉phase difference相差achromatic singlet消色差透镜Interferometer干涉仪boundary constraint边界约束,池壁效应radii 半径Zoom lenses变焦透镜Beam splitters分束器discrete不连续的,分离的objective/eye lens物镜/目镜mainframe主机rudimentary根本的,未发展的photographic照相得摄影得taxing繁重的,费力得algebra代数学trigonometry三角学geometry几何学calculus微积分学philosophy 哲学lagrange invariant拉格朗日不变量spherical球的field information 场信息Standard Lens标准透镜Refracting Surface折射面astigmatism 散光HDTV高清晰度电视DLV ( Digital Light Valve)数码光路真空管,简称数字光阀diffraction grating衍射光珊field angle角paraxial ray trace equations近轴光线轨迹方称back focal length后焦距principal plane主平面vertex顶点,最高点astigmatism散光,因偏差而造成的曲解或错判medial中间的,平均的variance不一致conic圆锥的,二次曲线field of view视野collimator瞄准仪convolution回旋.盘旋,卷积fuzzy
失真,模糊aberrated异常的asymmetry不对称得indicative可表示得parabolic拋物线得suffice足够,使满足specification规格,说明书straightforward易懂的,直接了当的,solidify凝固,巩固. Constraints 约束,限制metrology度量衡field coverage视场,视野dictate口述, 口授, 使听写, 指令, 指示, 命令, 规定irradiance发光, 光辉,辐照度aerial 空气得,空中得halide卤化物的monochromatic单色的,单频的polychromatic多色的aspherical非球面的spherical球面的alignment 列队,结盟power(透镜)放大率equiconvergence 同等收敛
EFL(effective focal length)有效焦距workhorse广为应用的设备biconvex两面凸的global optimization整体最优化concave凹得,凹面得cylindrical圆柱得solid model实体模型Modulation Transfer Function调制传递函数in the heat of在最激烈的时候protocol协议,规定triplet三重态sanity心智健全zinc锌,涂锌的selenide 硒化物,硒醚miscellaneous各色各样混在一起, 混杂的, 多才多艺的versus与...相对polynomial多项式的coefficient系数explicit function显函数
eo:ELq> | -G[1]=XoU
distinct清楚的,截然不同的emanate散发, 发出, 发源rudimentary根本的,未发展的intersection角差点PRTE=paraxial ray trace equation旁轴光线轨迹方程achromats 消色差透镜cardinal points基本方位separations分色片dashed虚线blow up放大overlay覆盖,覆盖图multiplayer 多层的humidity 湿度float glass浮法玻璃square one 出发点,端点square up to 准备开打,坚决地面对reflecting telescope 反射式望远镜
品质名词(中英对照)A ABC analysis ABC 分析 Abnormality 不正常性 Abscissa 横坐标 Absolute deviation 绝对离差 Absolute dispersion 绝对离势 Absolute error 绝对误差 Absolute frequency 绝对次数 Absolute number 绝对数 Absolute reliability 绝对可靠度 Absolute term 绝对项 Absolute value 绝对值 Absolute variation 绝对变异 Abstract number 抽象数 Abstract unit 抽象单位 Accelerated factor 加速系数,加速因子Accelerated life test 加速寿命试验
Accelerated test 加速试验 Acceleration 加速度 Acceptable limit 允收界限 Acceptable process 允收制程水平Acceptable quality 允收品质 Acceptable quality level (AQL) 允收质量水平Acceptable reliability level (ARL) 允收可靠度水平Acceptability 允收性 Acceptability criterion 允收标准 Acceptance 允收,验收 Acceptance, probability of 允收机率Acceptance, region of 允收区域 Acceptance and rejection criteria 允收与拒收准则Acceptance boundary 允收界限 Acceptance coefficient 允收系数 Acceptance control chart 验收管制图Acceptance cost 验收费用 Acceptance criteria 允收准则Acceptance error 允收误差
ABS 资产担保证券(Asset Backed Securities的英文缩写)Accelerated depreciation 加速折旧 Acceptor 承兑人;受票人;接受人 Accommodation paper 融通票据;担保借据 Accounts payable 应付帐款 Accounts receivable 应收帐款 Accredited Investors 合资格投资者;受信投资人 指符合美国证券交易委员(SEC)条例,可参与一般美国非公开 (私募)发行的部份机构和高净值个人投资者。 Accredit value 自然增长值 Accrediting 本金增值 适用于多种工具,指名义本金在工具(如上限合约、上下限合 约、掉期和互换期权)的期限内连续增长。 Accrual basis应计制;权责发生制 Accrued interest 应计利息 ACE 美国商品交易所 Acid Test Ratio 酸性测验比率;速动比率 Acquisition 收购 Across the board 全面一致;全盘的 Acting in concert 一致行动;合谋 Active assets 活动资产;有收益资产 Active capital 活动资本 Actual market 现货市场 Actual price 现货价 Actual useful life 实际可用年期 Actuary 精算师;保险统计专家 ADB 亚洲开发银行 (Asian Development Bank的英文缩写) ADR 美国存股证;美国预托收据;美国存托凭证(参见American Depository Receipt栏目) ADS 美国存托股份 (American Depository Share的英文缩写) Ad valorem 从价;按值 Ad valorem stamp duty 从价印花税
常用中英文对照 MSA:测量系统分析(MEASUREMENT SYSTEM ANALYSIS) AQL:允收水准(ACCEPTABLE QUALITY LEVER) ISO:国际标准化组织(INTERNATIONAL ORGANIZATION FOR STANGDARDIZA TION)FMEA:失效模式和影响分析(FAILURE MODE AND EFFECT ANALYSIS) FPY:首次合格率(FIRST PASS YIELD) JIT:及时率(JUST IN TIME) QC:品质控制 QA:品质保证 QE:品质工程 IQC:来料品质控制(INCOMING QUALITY CONTROL) IPQC:制程品质控制(INPROCESS ----------------------------) FQC:最终品质控制(FINAL -------------------------------------) LQC:生产线品质控制(LINE --------------------------------------) SQA:供应商品质保证(SUPPLIER QUALITY CONTROL) DCC:文控中心(DOCUMENT CONTROL CENTER) PQA:制程品质保证(PROCESS QUALITY ASSYRANCE) FQA:最终-------------(FINAL ---------------------------------------) DAS:缺陷分析系统(DEFECTS ANALYSIS SYSTEM) FA:坏品分析(FAILURE ANALYSIS) CPI:连续工序改善(CONTINUOUS PROCESS IMPROVEMENT) CS:客户服务(CUSTEMER SERVICE) TRAINING:培训 COQ:品质成本 COIF:内部缺陷成本 PPM:百万分之-----(PART PER MILLION) MSDS:材料安全资料卡(MATERIAL SAFETY DATA SHEET) MRB:物料/材料审查委员会(MATERIALS REVIEW BOARD) MQC:制造质量控制(MANUFACTURING QUALITY CONTORL) QAP:质量保证计划(QUALITY ASSURANCE PLANNING) BOM:料件结构表(BILLS OF MATERIAL) QM:品质手册(QUALITY MANUAL) QP:品质程序(QUALITY PROCEDURE/PEOGRAM) WI:作业指导书(SOP/SIP------WORK INSTRUCTION) FR:表单/表格(FORM) SOP:标准操作程序(STANDARD OPERATING PROCEDURE) SIP:标准检验程序(STANDARD INSPECTION PROCEDURE) FIFO:先进先出(FIRST IN FIRST OUT) CO:公司(COMPANY) LID:有限的(LIMITED) CC:复写的副本;抄送(CARBON COPY)
机械专业相关词汇中英文翻译大全 单价unit price 工日合计Man-day total/work-day total 人工费cost of labor 材料费materials expenses 机械的mechanical 检查接线connection test 发电机generator 调相机phase regulator 周波cycle 减负荷装置 load-shedding equipment 断路器柜circuit breaker cabinet 单母线single busbar 互感器transformer 每相电流Current by Phase 封闭式插接close type socket joint 发电机控制面板generator control panel 分级卸载sorted unloading 同步控制synchronization control 调速器 speed governor 信号屏signal screen 继电器relay 高压柜high pressure cabinet 油浸电力变压器oil-immersed power transformer 空气断路器air circuit breaker 控制屏control panel 直流馈电屏direct current feed control panel 电容器electric condenser 计量盘metering panel 成套配电箱whole set of distribution box 落地式floor model 控制开关Control switches 铜芯电力电缆Copper core power cable 控制电缆actuating cable 热缩式电力电缆终端头pyrocondensation power cable terminal 钢结构支架配管steel structure bracket tubing 万用槽钢versatile U-steel 电缆托架 cable bracket 钢制托盘式桥架steel Tray-type cable support system waterproof socket 防水插座 防爆插座Explosion-proof socket 接地绞线earthing twisted pair 接地母线 earthing bus
语文课程与教学论 名词术语中英文对照表 the Chinese Course and Teaching and Learning Theory in Chinese and English Teaching materials editing teaching materials /Chinese Teaching Materials /edit teaching materials /Uniformed Chinese Teaching Materials /Experimental Teaching Materials /Mother Tongue Teaching Materials /Teaching Materials of the New Course *textbook *reading book *teaching reference book *exercises book *studying plan Technology /Educational Technology /Modern Educational Technology /Educational Technology in Chinese Teaching /multi-media technology /net technology /cloud serving technology *white board *net meeting *chat room *blog Teaching Basic Theory of the Teaching teaching aim teaching task teaching objective teaching model teaching tactics teaching principle teaching program teaching reform teaching case Courseware teaching resources teaching experiment /mother tongue teaching A Term List of 1. 教材( JC ) 教材编写 /语文教材 /编写教材 / 统编教材 /实验教材 /母语教材 /新课程教材 * 课本 * 读本 * 教学参考书(教参) * 练习册 *学案 2. 技术( JS ) / 教育技术 /现代 教育技术 /语文 教育技术 /多媒 体技术 / 网络 技术 /云服务技 术 * 白板 *网 络会议 *聊天室 * 博克 3. 教学 (JX ) 教学基本理论 教学目的 教学 任务 教学目标 教学模式 教学 策略 教学原则 教学大纲 教学 改革 教学案例 教学课件 教学 资源 教学实验 /母语教学
纺织机械专业术语大全及中英文对照,很有用! 导读 本文由钱苹生先生整理编辑,再次表示感谢!如需转载,请注明作者及来源,谢谢! 一、纺纱类机械: 1. 棉纺前纺机械Preparatory machinery for cotton spinningsystems 2. 轧花机Gins 3. 打包机 Baling presses4. 拆包机及抓包机Bale breakers, bale pluckers5. 清花间用机械Blow room machinery6. 混棉箱Blending hoppers7. 梳棉机自动喂棉机Automatic feeding devices for cardingmachines8. 梳棉机Carding machines9. 并条机Drawing frames10. 条卷机Sliver lap machines11. 精梳机Combing machines12. 粗纱机Speed frames13. 包纱机Covering machines14. 精梳毛纺、半精梳毛纺、毛纺前纺机械Preparatory machinery for worsted,semi-worsted or woolen spinning systems15. 羊毛开包机Wool bale brokers16. 洗毛生产机Wool washing lines17. 开松除杂机、和毛机、弹毛机willowingmachinery and teasers, garnet machines18. 废毛利用生产机Waste reclamation19. 梳毛机Carding machines20. 自动
机械工具 扳子spanner (美作:wrench) 敲击扳手Impact spanner 双头扳子double-ended spanner 活扳子,活络扳手adjustable spanner, monkey wrench 套筒扳手box spanner (美作:socket wrench) 卡规calipers 夹钳pincers, tongs 剪床/大剪刀shears 钢锯hacksaw 剪线钳wire cutters 万能手钳multipurpose pliers, universal pliers 可调手钳adjustable pliers 冲子punch 钻drill 麻花钻Twist drill 螺纹thread 丝锥threader 丝锥tap 板牙spanner 板牙mastertap 绞刀(扩孔钻) reamer 柱绞刀cylinder reamer 锥绞刀taper reamer 卡盘chuck 三角刮刀scraper 孔径规calliper gauge 铆钉rivet 螺母nut 自锁螺母,防松螺母locknut 螺栓bolt 销钉pin, peg, dowel 垫圈washer U形钉staple 注油枪grease gun 撬棍Tommy bar, crow bar 防震橡胶锤rubber dead blow hammer 手动葫芦(倒链) manual hoister 机械加工拋光polishing 安装to assemble 衬套bushing 半机械化semi-mechanization; semi-mechanized 半自动滚刀磨床semi-automatic hob grinder 滚刀hob 扳手wrench 1
机械专业英语词汇中英文对照翻译一览表 陶瓷ceramics 合成纤维synthetic fibre 电化学腐蚀electrochemical corrosion 车架automotive chassis 悬架suspension 转向器redirector 变速器speed changer 板料冲压sheet metal parts 孔加工spot facing machining 车间workshop 工程技术人员engineer 气动夹紧pneuma lock 数学模型mathematical model 画法几何descriptive geometry 机械制图Mechanical drawing 投影projection 视图view 剖视图profile chart 标准件standard component 零件图part drawing 装配图assembly drawing
尺寸标注size marking 技术要求technical requirements 刚度rigidity 内力internal force 位移displacement 截面section 疲劳极限fatigue limit 断裂fracture 塑性变形plastic distortion 脆性材料brittleness material 刚度准则rigidity criterion 垫圈washer 垫片spacer 直齿圆柱齿轮straight toothed spur gear 斜齿圆柱齿轮helical-spur gear 直齿锥齿轮straight bevel gear 运动简图kinematic sketch 齿轮齿条pinion and rack 蜗杆蜗轮worm and worm gear 虚约束passive constraint 曲柄crank 摇杆racker
整个注射过程: (四个油缸作用) clamp cylinder nozzle cylinder 锁模—(低压模保)—整前(喷嘴进)—(行程开关injection start)—injection cylinder 注射(螺杆进)—保压—储料(预塑/螺杆转)—(料自料斗进,料满后推动螺杆退,背压)—防流涎—同时冷却—整后(有时无)—开模— ejector cylinder 顶出(产品通过光电开关/电眼自动掉下)—顶退. TECHNICAL TERMS flat-head screw: 平头螺丝pan-head screw: 圆头螺丝 fixing screw: 托脚screwdriver: 螺丝刀 full thread: 全螺纹locknut: 紧定螺帽/螺母,紧母/迫母, tie rod nut: 调模丝母tie rod nut washer: 调模丝母垫 tie rod nut holder: 调模丝母压盖 bolt: n. 螺钉/螺栓; v,栓住, 定位stud bolt: 模具压板螺栓 hold-down bolt: 压紧装置/螺栓 jack bolt: 调节螺栓eye bolt: 吊环螺栓 countersink screw: 沉头螺钉fundation bolt: 地脚螺栓 Mold mounting bolt: 模具安装螺栓fastening bolt: 紧固螺钉anchoring hole/ foundation bolt hole: 地脚螺栓孔flight: 螺齿/导程secondary flight: 次螺槽primary flight: 主螺槽 channel: 槽, 通道screw land: 螺棱land:台面flute: 槽trough: 槽chute: 滑槽 coolant reservoir:冷却液槽T-slot: T型槽 screw axis: 螺轴pitch: 螺距(沥青), 螺牙(螺距= lead) screw speed: 螺杆转速 opposed semi-circular grooves: 对置式半环形键槽 Tangential groove: 切向键槽axial groove: 轴向键槽 Remedial groove: 修复式键槽stripping tank: 洗提槽 Spline: 花键key: 键membrane: 薄膜键 steel wadge: 钢契口grinding wheel: 砂轮emery cloth: 砂布main machine: 整机machine frame: 机器框架/机架 barrel base cover: 前板盖screw barrel: 机筒end cap: 前机筒
Gredit Account货方科目 Exch Rate兑换率ASAP As soon As possible尽快 FTP File Transfer Protocol文件传递(输)协议CD-ROM compact disc read -only memory只读光盘存储器UV Ultraviolet紫外线 EC Engineering change工程变更 EV Equipment Variance量具变异 AV Appraiser variance作业者变异PV Part variation局部变异 Characteristic Diagram特性要因图 Stratification层别法 Check list查检表 Histogram直方图 Scatter Diagram散布图 Pare to Diagram柏拉图 Control Chart管制图 CEO Chief Executive Officer执行总裁 VIP Very Important Person贵宾 ERP Enterprice Resource Planning企业资源规划MRP I Material Requirement Planning物料需求规划MRP II Maufacturing Resource Planning制造资源规划OA Operation Analysis作业者变异 Gap Analysis差异分析PC Product Control生产分析 MC Material control物料管控 MTS make to--Stock存货式生产ATO assemble-to-order接单式装配ATM Applicotion Implementation应用系统导入方法 Unorder Receipt无订单的收料 Shop floor车间、职场 Shop floor control厂地控制、车间管理Shop floor production control工厂生产管理 Write书写 Observed观察 Read阅读 Listen听 UCL Upper Control Limit管制上限 LCL Lower Control Limit管制下限 Critical defect严重缺点 Minor defect次要缺点 Packing List出货明细 PCB Printed Circuit Board印刷电路板 PCBA Printed Circuit Board Assemblies 印刷电路板总成常用品质术语中英文对照表
Plan: Type of qualified retirement plan in which employees make salary reduced, pre-tax contributions to an employee trust. In many cases, the employer will match employee contributions up to a specified level. - A - "A" Round : A financing event whereby venture capitalists invest in a company that was previously financed by founders and/or angels. The "A" is from Series "A" Preferred stock. See "B" round. Accredited Investor: Defined by Rule 501 of Regulation D, an individual (i.e. non-corporate) "accredited investor" is either a natural person who has individual net worth, or joint net worth with the person's spouse, that exceeds $1 million at the time of the purchase OR a natural person with income exceeding $200,000 in each of the two most recent years or joint income with a spouse exceeding $300,000 for those years and a reasonable expectation of the same income level in the current year. For the complete definition of accredited investor, see the SEC website. Accrued Interest: The interest due on preferred stock or a bond since the last interest payment was made. Acquisition: The process of gaining control, possession or ownership of a private portfolio company by an operating company or conglomerate. ACRS: Accelerated Cost Recovery System. The IRS approved method of calculating depreciation expense for tax purposes. Also known as Accelerated Depreciation. Adjustment Condition: An adjustment condition occurs if the company does not close on an equity investment in the company for a minimum of $xxx, net of brokerage fees, on or before a series of other predetermined events, i.e. delivery of term sheet to preferred stockholders. ADR: American Depositary Receipt (ADR's). A security issued by a U.S. bank in place of the foreign shares held in trust by that bank, thereby facilitating the trading of foreign shares in U.S. markets. Advisory Board: A group of external advisors to a private equity group or portfolio company. Advice provided varies from overall strategy to portfolio valuation. Less formal than a Board of Directors.
. . 品质管理名词(中英文对照) QE=品质工程师(Quality Engineer ) MSA: Measurement System Analysis 量测系统分析 LCL: Lower Control limit 管制下限 Control plan 管制计划 Correction 纠正 Cost down 降低成本 CS: customer Sevice 客户中心 Data 数据 Data Collection 数据收集 Description 描述 Device 装置 Digital 数字 Do 执行 DOE: Design of Experiments 实验设计 Environmental 环境 Equipment 设备 FMEA: Failure Mode and Effect analysis 失效模式与效果分析 FA: Failure Analysis 坏品分析 FQA: Final Quality Assurance 最终品质保证 FQC: Final Quality control 最终品质控制 Gauge system 量测系统 Grade 等级 Inductance 电感 Improvement 改善 Inspection 检验 IPQC: In Process Quality Control 制程品质控制 IQC: Incoming Quality Control 来料品质控制 ISO: International Organization for Standardization 国际标准组织 LQC: Line Quality Control 生产线品质控制 LSL: Lower Size Limit 规格下限 Materials 物料 Measurement 量测 Occurrence 发生率 Operation Instruction 作业指导书 Organization 组织 Parameter 参数 Parts 零件 Pulse 脉冲 Policy 方针 Procedure 流程 Process 过程 Product 产品 Production 生产 Program 方案 Projects 项目 QA: Quality Assurance 品质保证 QC: Quality Control 品质控制 QE: Quality Engineering 品质工程 QFD: Quality Function Design 品质机能展开 Quality 质量 Quality manual 品质手册 Quality policy 品质政策 Range 全距 Record 记录 Reflow 回流 Reject 拒收 Repair 返修 Repeatability 再现性 Reproducibility 再生性 Requirement 要求 Residual 误差 Response 响应 Responsibilities 职责 Review 评审 Rework 返工 Rolled yield 直通率 sample 抽样,样本 Scrap 报废 SOP: Standard Operation Procedure 标准作业书 SPC: Statistical Process Control 统计制程管制 Specification 规格 SQA: Source(Supplier) Quality Assurance 供应商品质保证 Taguchi-method 田口方法 TQC: Total Quality Control 全面品质控制 TQM: Total Quality Management 全面品质管理 Traceability 追溯 UCL: Upper Control Limit 管制上限 USL: Upper Size Limit 规格上限 Validation 确认 Variable 计量值 Verification 验证 Version 版本 QCC Quality Control Circle 品质圈/QC 小组 PDCA Plan Do Check Action 计划 执行 检查 总结
循证医学名词术语中英文对照 安全性Safety 半随机对照试验quasi- randomized control trial,qRCT 背景问题background questions 比值比odds ratio,OR 标准化均数差standardized mean difference, SMD 病例报告case report 病例分析case analysis 病人价值观patient value 病人预期事件发生率patient’s expected event rate, PEER 补充替代医学complementary and alternative medicine, CAM 不良事件adverse event 不确定性uncertainty Cochrane图书馆Cochrane Library, CL Cochrane系统评价Cochrane systematic review, CSR Cochrane协作网Cochrane Collaboration, CC Cox比例风险模型Cox’ proportional hazard model 参考试验偏倚References test bias 肠激惹综合征irritable bowel syndrome,IRB 测量变异measurement variation 成本-效果cost-effectiveness 成本-效果分析cost-effectiveness analysis
成本-效益分析cost-benefit analysis 成本-效用分析cost-utility analysis 成本最小化分析(最小成本分析)cost-minimization analysis 重复发表偏倚Multiple publication bias 传统医学Traditional Medicine,TM D—L法DerSimonian & Laird method the number needed to harm one more patients from the therapy,NNH 对抗疗法allopathic medicine,AM 对照组中某事件的发生率control event rate,CER 多重发表偏倚multiple publication bias 二次研究secondary studies 二次研究证据secondary research evidence 发表偏倚publication bias number needed to treat,NNT 非随机同期对照试验non-randomized concurrent control trial 分层随机化stratified randomization 分类变量categorical variable 风险(危险度)risk 干扰co-intervention 工作偏倚Workup bias 固定效应模型fixed effect model 国际临床流行病学网International Clinical Epidemiology Network, INCLEN
塑料橡胶机械及设备术语-中英文对照 A) Machinery & Equipment for the Plastics & Rubber Industries 塑料橡胶机械及设备 . Machine & equipment for preprocessing, recycling预加工、回收利用机械及设备 1.01 Mixers混炼机 1.02 Two roll mills双辊塑炼机 1.03 Powder compactors粉料压实机 1.04 Size reduction equipment (granulators, crushers, shredders, blade granulators)破碎设备(粉碎机、压碎机、撕碎机、叶片式造粒机) 1.05 Pelletizers切粒机 1.06 Screen changers / Melt filters换网器/熔体过滤器 1.07 Compounding lines配混生产线 1.08 Recycling lines回收利用作业线 Extruders & extrusion lines挤出机及挤出生产线 2.01 Extruders, single screw type单螺杆挤出机 2.02 Extruders, twin screw type双螺杆挤出机 2.03 Extrusion lines for blown film吹涨薄膜挤出生产线 2.04 Extrusion lines for flat film and sheets平挤薄膜及片材挤出生产线 2.05 Extrusion lines for strappings橡皮圈挤出生产线 2.06 Extrusion lines for mono- and multifilaments单层及多层丝挤出生产线 2.07 Extrusion lines for pipes and profiles管道及型材挤出生产线 2.08 Extrusion lines for laminating and coating层压及涂层挤出生产线2.09 Extrusion lines for sheathing of pipes and cables管道及电线护套挤出生产线 2.10 Extrusion lines for rubber橡胶挤出生产线 Injection moulding machines注塑机 3.01 Injection moulding machines, general purpose通用注塑机 3.02 Injection moulding machines, multi-component多组分注塑机 3.03 Injection moulding machines, multi-station多任务位注塑机 3.04 Injection moulding machines, for thermosets热固性塑料注塑机 3.05 Injection moulding machines, for rubber橡胶注塑机 Blow moulding machines吹塑机 4.01 Extrusion blow moulding machines挤坯吹塑机 4.02 Extrusion stretch blow moulding machines挤拉坯吹塑机 4.03 Injection blow moulding machines注坯吹塑机
机械专业术语中英文对 照 集团文件版本号:(M928-T898-M248-WU2669-I2896-DQ586-M1988)
机械专业术语 组装、冲压、喷漆等专业词汇Assembly line组装线Layout布置图Conveyer流水线物料板Rivet table 拉钉机Rivet gun 拉钉枪Screw driver起子Electric screw driver电动起子Pneumatic screw driver气动 起子 worktable 工作桌 OOBA开箱检 查 fit together组 装在一起 fasten锁紧 (螺丝) fixture 夹 具(治具) pallet栈板 barcode条 码 barcode scanner条 码扫描器 fuse together熔 合 fuse machine热 熔机 repair修理 operator作 业员 QC品管 supervisor 课长 ME制造工程 师 MT制造生技 cosmetic inspect外 观检查 inner parts inspect内 部检查 thumb screw 大头螺丝 lbs. inch 镑、英寸 EMI gasket 导电条 front plate 前板 rear plate 后板 chassis 基 座 bezel panel 面板 power button电源 按键 reset button重置 键 Hi-pot test of SPS高源 高压测试 Voltage switch of SPS 电源电压接 拉键 sheet metal parts 冲件 plastic parts塑胶 件 SOP制造作 业程序 material check list 物料检查表 work cell 工作间 trolley台 车
机械术语中英文对照: Piping work: 铺管工程 Steam trace: 加热蒸汽管道 Cutting: 切割 socket weld承插焊接 fillet weld角焊,填角焊 branch connection分支接续 fabrication tolerance.制造容差 local heat treatment 局部热处理 threaded pipe螺纹管 seal welding.密封焊接 flange joint 凸缘接头 undercut 底切 feeder馈电线 conduit outlet电线引出口 seal fitting 密封接头, 密封配件 Screw thread lubricant螺纹润滑剂 Seal: 绝缘层 weld reinforcement 焊缝补强 lock washer 锁紧[止动, 防松]垫圈electrical panel.配电板,配电盘 nipple螺纹接头
zinc plated.镀锌的 ring joint 环接, 围缘接合 bolt 螺栓 control: 控制器 National Electrical Code 全国电气规程 master schedule 主要图表, 综合图表, 设计任务书, 主要作业表torque wrench 转矩扳手 job site 施工现场 flange connection.凸缘联接 Hard hat:安全帽 Goggles:护目镜 stockpile贮存 packing list装箱单 crate: 柳条箱 purchased material list原材料进货单 back-feed反馈 wire coil线盘,线卷, NPT thread. 美国标准锥管螺纹 cable gland 电缆衬垫 terminal block线弧, 接头排接线盒, 接线板, 线夹 power drill机械钻 connector. 接线器
期货期权术语中英文对照 一、期货 1 Futures market 期货市场 2Futures contract 期货合约 3 Financial futures 金融期货 4 Commodity futures 商品期货 5 Financial futures contract 金融期货合约 6 Currency futures contract 货币期货合约 7 Interest rate futures contract 利率期货合约 8 Stock index futures contract 股票指数期货合约 9Financial forward contract 金融远期合约 10 Clearing house 清算所 11Initial margins 初始保证金 12 Settlement 交割 13 Short seller 卖空者 14 The Gilts 金边债券 15 Futures delivery 期货交割 16 Futures transaction 期货交易 17Hedging mechanism 规避机制 18Market expectation 市场预期 19 To defuse(attempted monopoly positions) 冲破(形成的市场垄断状况) 20 Net settlement status 净结算状况,净结算头寸 21Synthetic financial futures position 综合金融期货头寸 22 Status inquiry 信用状况调查 23 Stock indexes 股票指数 24 Stock index futures 股票指数期货 25Currency futures 外币期货 26Distant futures 远期期货 27 Nearby futures 近期期货 28 On a discount basis 以折价形式 29 A long position 多头部位,利多形势 30 A short position 空头部位,短缺头寸 31 Short purchase 买空,空头补进 32 Shifting risk 转嫁风险,转移风险 33Basis risk 基差风险 34 Converge 集聚(期货和现货价格) 35 Swing 变动(幅度),摆动,涨跌 36 Cross hedge 交叉套做 37Volatile 易变的,不稳定的 38 Volatile market 不稳定的市场行情 39 Margin money 预收保证金,开设信用证保证金 40position 头寸,交易部位,部位 41Long position 多头寸,买进的期货合同 42Short position 空头