电耙机操作规程(标准版)

The prerequisite for vigorously developing our productivity is that we must be responsible for the safety of our company and our own lives.(安全管理)单位:___________________姓名:__________

2021-02-24
电耙绞车工安全技术操作规程简易版

The Daily Operation Mode, It Includes All The Implementation Items, And Acts To Regulate Individual Actions, Regulate Or Limit All Their Behaviors, And Finally Simplify Management

2021-03-04
电耙机操作规程通用版

操作规程编号:YTO-FS-PD980电耙机操作规程通用版In Order T o Standardize The Management Of Daily Behavior, The Activities And T asks Are Controlled By The Determined Terms, So As T o Achieve The Effe

2021-02-23
电耙机操作规程正式样本

文件编号:TP-AR-L6430There Are Certain Management Mechanisms And Methods In The Management Of Organizations, And The Provisions Are Binding On The Personnel Within The Jurisdiction, Whi

2021-03-14
电耙工安全操作规程(新编版)

( 操作规程 )单位:_________________________姓名:_________________________日期:_________________________精品文档 / Word文档 / 文字可改电耙工安全操作规程(新编版)Safety operating procedures refer to documents describ

2021-03-21
电耙绞车工安全技术操作规程正式样本

文件编号:TP-AR-L8769There Are Certain Management Mechanisms And Methods In The Management Of Organizations, And The Provisions Are Binding On The Personnel Within The Jurisdiction, Whi

2024-02-07
{安全管理制度}各工种的安全操作规程

{安全管理制度}各工种的安全操作规程

2020-05-08
电耙机操作规程正式版

Guide operators to deal with the process of things, and require them to be familiar with the details of safety technology and be able to complete things after special training.电耙机操

2019-12-16
金属矿山安全操作规程

安全技术操作规程1、凿岩工安全操作规程:(1)打眼前要检查凿岩机、钎子、气腿是否合乎要求,检查风水管接头是否严密,做到不漏水、不漏风,看看凿岩机是否加了油,有无损坏。(2)打眼前,应处理好顶板和两帮浮石,并洒水淋洗工作面的粉尘。(3)严禁打残留炮眼和瞎炮。(4)打眼时姿势应正确,不准骑在气腿上或压在机器上打眼,以防断钎伤人;向上打眼时,防止钎子落下砸脚,打下

2021-01-26
电耙安全操作规程简易版

The Daily Operation Mode, It Includes All The Implementation Items, And Acts To Regulate Individual Actions, Regulate Or Limit All Their Behaviors, And Finally Simplify Management

2020-08-22
电耙机操作规程(正式)

电耙机操作规程(正式) Standardize The Management Mechanism To Make The Personnel In The Organization Operate According To The Established Standards And Reach The Expected Level.编订:__________

2024-02-07
电耙工安全操作规程示范文本

电耙工安全操作规程示范文本In The Actual Work Production Management, In Order To Ensure The Smooth Progress Of The Process, And Consider The Relationship Between Each Link, The Specific Requirem

2024-02-07
各工种的安全操作规程(ppt 35页)

各工种的安全操作规程(ppt 35页)

2024-02-07
电耙工安全操作规程

电耙工安全操作规程(念pa,二声)检查与工作1、检查开车前,电耙司机应做好下列检查工作:检查顶邦和支架,进行敲邦问顶。检查电耙附近是否有障碍物。检查电耙底座是否稳固,各部螺丝有无松动现象。检查电耙滚筒、挡板是否与钢绳方向一致,如不一致,需加以移动调整。检查刹车装置是否失灵。检查开关接点是否烧损,电线接头是否松动。各部加油点保持清洁,并定期选行加油。开车前,助

2024-02-07
电耙工安全操作规程实用版

YF-ED-J4327可按资料类型定义编号电耙工安全操作规程实用版In Order To Ensure The Effective And Safe Operation Of The Department Work Or Production, Relevant Personnel Shall Follow The Procedures In Handlin

2024-02-07
电耙绞车设备操作规程

电耙绞车设备操作规程一、用途及使用范围绞车主要用于金属矿及其它矿场的坑内及露天作矿石搬运及填充工作。绞车主要用于水平耙运,也可用于倾角不大的斜坡耙运,不能作为提升设备。二、使用1、根据使用情况,钢丝绳可从卷筒的上部或下部引出,此时,导向装置也应装在上部或下部。2、钢丝绳的长度应考虑在耙斗到达终点位置时,留在卷筒上的长度不少于三圈。3、安装操纵闸时,将其与制动

2024-02-07
电耙绞车工安全技术操作规程示范文本

电耙绞车工安全技术操作规程示范文本In The Actual Work Production Management, In Order To Ensure The Smooth Progress Of The Process, And Consider The Relationship Between Each Link, The Specific Requ

2024-02-07
电耙机操作规程标准范本

操作规程编号:LX-FS-A95720 电耙机操作规程标准范本In The Daily Work Environment, The Operation Standards Are Restricted, And Relevant Personnel Are Required To Abide By The Corresponding Procedures A

2024-02-07
电耙安全操作规程示范文本

电耙安全操作规程示范文本In The Actual Work Production Management, In Order To Ensure The Smooth Progress Of The Process, And Consider The Relationship Between Each Link, The Specific Requireme

2024-02-07
电耙安全操作规程

电耙安全操作规程Through the process agreement to achieve a unified action policy for different people, so as to coordinate action, reduce blindness, and make the work orderly.简介:该规程资料适用于公司

2024-02-07