FU-68PDF-510M39B中文资料

OG-APG68(V5) 03/06/2001 AN/APG–68(V5)操作指导This guide is written for eFalcon109–EPAF+Chevron patches enabledProduced byStephen‘HotDogOne’French目录绪论 (3)AN/APG-68(V5)机制–空中目标模式–通用 (4)方位角 (6)扫描线 (7)俯仰控制 (8)距离 (9)目标截获光标 (9)搜索高度显示........................................................................................ (9)姿态指示器.................................................................................................. (9)干扰 (10)武器专用信息 (10)AN/APG-68(V5)机制–边测距边搜索 (11)目标跟踪 (12)目标捕获 (12)目标历史 (13)边测距边搜索–状况警觉模式(RWS-SAM) (14)边测距边搜索–单目标跟踪 (16)天线冲突瞄准角.......................................................................... . . . . . . . . . . . .. (16)为什么当什么时候使用边测距边搜索 (17)AN/APG-68(V5)机制–边跟踪边扫描 (18)扩充模式 (19)为什么当什么时候使用边跟踪边扫描 (20)AN/APG-68(V5)机制–矢量搜索 (21)VS能做些什么? (21)AN/APG-68(V5)机制–空战机动 (22)ACM–HUD (22)ACM–垂直扫描 (23)ACM–BORE (23)ACM–SLEW (24)AN/APG-68(V5)机制–对地目标模式 (25)对地雷达显示 (25)雷达增益 (26)操作点模式(STP) (26)雪犁模式(SP) (27)冻结模式........................................................................................................ . (27)AN/APG-68(V5)机制–地面测绘模式 (28)扩充视场(FOV)选项 (28)AN/APG-68(V5)机制-地面移动目标模式 (30)AN/APG-68(V5)机制-地面移动目标模式 (31)AN/APG-68(V5)机制–SEA模式 (32)AN/APG-68(V5)-附录 (33)Keyboard based Radar Controls Sorted By Key (33)Keyboard based Radar Controls Sorted By Function (34)Air Radar Modes Symbology (35)对地雷达模式EXP选项参考 (36)缩写指南 (37)参考书目 (38)链接 (38)Authors Ramblings (39)绪论AN/APG-68(V5)现用于F-16C飞机。

Thin Film Flat Chip FusesVishay BeyschlagMF U Thin F ilm F lat Chip F uses are the perfect choice for the most fields of modern electronics. The highly controlled manufacturing thin film process guarantees an outstanding stability of fusing characteristics. Typical applications include information technology, telecommunication, medical equipment, industrial, audio/video, and automotive electronics.FEATURES•Advanced thin film technology •Very quick acting fuse characteristics •Outstanding stability of fusing characteristics •Standard metric SMD sizes•Green product, supports lead (Pb)-free solderingAPPLICATIONS•Information technology •Industrial electronics •Automotive electronics •Telecommunication •Medical equipment •Audio/video electronicsRMETRIC SIZEINCH:0402060308051206METRIC:RR 1005MRR 1608MRR 2012MRR 3216MTECHNICAL SPECIFICATIONDESCRIPTION MFU 0402MFU 0603MFU 0805MFU 1206Metric sizeRR 1005M RR 1608M RR 2012M RR 3216M Rated Current range I R 0.5 A to 3.15 A0.5 A to 5.0 A0.5 A to 5.0 A0.5 A to 6.3 ARated voltage, U max. DC 32 V 32 V 32 V 63 V Breaking Capacity,I max. at U max. DC 50 A at 32 V 50 A at 32 V 50 A at 32 V 50 A at 63 V Voltage drop at 1 x I R 90 mV to 420 mV 85 mV to 361 mV 98 mV to 374 mV 116 mV to 433 mV Cold resistance at 0.1 x I R22 m Ω to 640 m Ω13 m Ω to 550 m Ω15 m Ω to 570 m Ω14 m Ω to 660 m ΩClimatic category (LCT/UCT/days)55/125/5655/125/5655/125/5655/125/56Permissible continuouscurrent rating at ϑamb. = 23 °C0.7 x I R 0.7 x I R 0.7 x I R 0.7 x I R ApprovalUL recognition fileE253806E253806E253806E253806IEC 60127-4n/a Refer to table:MFU 0603 RATING Refer to table:MFU 1206 RATING FIT observed≤ 0.2 x 10- 9/h ≤ 0.2 x 10- 9/h≤ 0.2 x 10- 9/h≤ 0.2 x 10- 9/hVishay BeyschlagThin Film Flat Chip FusesNotes(1)Products can be ordered using either the PART NUMBER or the PRODUCT DESCRIPTION (2)Please refer to table PACKAGINGPART NUMBER AND PRODUCT DESCRIPTION MFU SERIES (1)PART NUMBER:MFU0603FF01000PW00MODEL/SIZE FUSE CHARACTERISTIC RATED CURRENT VALUE PACKAGING (2)SPECIAL MFU0402MFU0603MFU0805MFU1206FF = Very quick actingRated current valuein mA.Examples:00500 = 0.5 A 01000 = 1.0 A 06300 = 6.3 AE1E5E0P1P5PWUp to 2 digits 00 = StandardPRODUCT DESCRIPTION:MFU 0603-FF PW 1A0MFU 0603-FFPW 1A0MODEL SIZE FUSE CHARACTERISTIC PACKAGING (2)RATED CURRENT VALUEMFU0402060308051206FF = Very quick actingE1E5E0P1P5PWSee rating tables Examples:0A5 = 0.5 A 1A0 = 1.0 A6A3 = 6.3 APACKAGINGMODELREELDIAMETER PIECES/REELCODE MFU0402180 mm/7"1000E1180 mm/7"5000E5180 mm/7"10 000E0MFU0603180 mm/7"1000P1180 mm/7"5000P5330 mm/13"20 000PW MFU0805180 mm/7"1000P1180 mm/7"5000P5330 mm/13"20 000PW MFU1206180 mm/7"1000P1180 mm/7"5000P5330 mm/13"20 000PWM F U 0603F F 01000P W 00Thin Film Flat Chip FusesVishay BeyschlagDIMENSIONSNotes(1)Other values of rated current are available on request (2)Typical values(3)For packages with 1000 pieces, please use for packaging E1 instead of E0(4)For packages with 5000 pieces, please use for packaging E5 instead of E0DIMENSIONS - Chip Fuse types, mass and relevant physical dimensionsTYPE H (mm)L (mm)W (mm)W T (mm)T 1(mm)T 2(mm)MASS (mg)MFU 04020.32 ± 0.05 1.0 ± 0.050.5 ± 0.05> 75 % of W 0.2 + 0.1/- 0.150.2 ± 0.10.65MFU 06030.45 + 0.1/- 0.05 1.55 ± 0.050.85 ± 0.1> 75 % of W 0.3 + 0.15/- 0.20.3 + 0.15/- 0.2 1.9MFU 08050.45 + 0.1/- 0.05 2.0 ± 0.1 1.25 ± 0.15> 75 % of W 0.4 + 0.1/- 0.20.4 + 0.1/- 0.2 4.7MFU 12060.55 ± 0.13.2 + 0.1/- 0.21.6 ± 0.15> 75 % of W0.5 ± 0.250.5 ± 0.259.5MFU 0402 RATING - very quick acting (FF)SIZEFUSE CHAR.RATEDCURRENT (1)RATED VOLTAGEPRE-ARCING (2)I 2tat 10 x I RVOLT.DROP (2)at 1 x I R COLDRESIS (2)at0.1 x I RBREAKINGCAPACITYDC MARK.APPROVAL ORDERING CODE (3) (4)0402FF500 mA 32 V 0.0009 A 2s 420 mV 640 m Ω50 A at 32 V -UL MFU 0402-FF E0 0A5630 mA 32 V 0.0014 A 2s 331 mV 400 m Ω50 A at 32 V -UL MFU 0402-FF E0 0A63750 mA 32 V 0.0020 A 2s 275 mV 280 m Ω50 A at 32 V -UL MFU 0402-FF E0 0A75800 mA 32 V 0.0023 A 2s 231 mV 220 m Ω50 A at 32 V -UL MFU 0402-FF E0 0A81.0 A 32 V 0.0028 A 2s 184 mV 140 m Ω50 A at 32 V -UL MFU 0402-FF E0 1A01.25 A32 V 0.0039 A 2s 159 mV 97 m Ω50 A at 32 V -UL MFU 0402-FF E0 1A251.5 A 32 V 0.0059 A 2s 146 mV 74 m Ω50 A at 32 V -UL MFU 0402-FF E0 1A51.6 A 32 V 0.0065 A 2s 136 mV 65 m Ω50 A at 32 V -UL MFU 0402-FF E0 1A61.75 A 32 V 0.0077 A 2s 124 mV 54 m Ω50 A at 32 V -UL MFU 0402-FF E0 1A752.0 A 32 V 0.0101 A 2s 115 mV 44 m Ω50 A at 32 V -UL MFU 0402-FF E0 2A02.5 A 32 V 0.0157 A 2s 107 mV 33 m Ω50 A at 32 V -UL MFU 0402-FF E0 2A53.0 A 32 V 0.0227 A 2s 95 mV 24 m Ω50 A at 32 V -UL MFU 0402-FF E0 3A03.15 A32 V0.0250 A 2s90 mV22 m Ω50 A at 32 V-ULMFU 0402-FF E0 3A15Vishay BeyschlagThin Film Flat Chip FusesNotes(1)Other values of rated current are available on request (2)Typical values(3)For packages with 1000 pieces, please use for packaging P1 instead of PW (4)For packages with 5000 pieces, please use for packaging P5 instead of PWNotes(1)Other values of rated current are available on request (2)Typical values(3)For packages with 1000 pieces, please use for packaging P1 instead of PW (4)For packages with 5000 pieces, please use for packaging P5 instead of PWMFU 0603 RATING - very quick acting (FF)SIZEFUSE CHAR.RATED CURRENT (1)RATED VOLTAGEPRE-ARCING (2)I 2t at 10 x I RVOLT.DROP (2)at 1 x I R COLD RESIS (2)at0.1 x I RBREAKING CAPACITYDC MARK.APPROVAL ORDERING CODE (3) (4)0603FF500 mA 32 V 0.0009 A 2s361 mV 550 m Ω50 A at 32 V F UL/IEC MFU 0603-FF PW 0A5630 mA 32 V 0.0014 A 2s 331 mV 400 m Ω50 A at 32 V CT UL MFU 0603-FF PW 0A63750 mA 32 V 0.0020 A 2s 258 mV 262 m Ω50 A at 32 V G UL MFU 0603-FF PW 0A75800 mA 32 V 0.0023 A 2s 249 mV 237 m Ω50 A at 32 V CV UL MFU 0603-FF PW 0A81.0 A 32 V 0.0028 A 2s 223 mV 170 m Ω50 A at 32 V H UL/IEC MFU 0603-FF PW 1A01.25 A 32 V 0.0039 A 2s 180 mV 110 m Ω50 A at 32 V J UL MFU 0603-FF PW 1A251.5 A 32 V 0.0059 A 2s 155 mV 79 m Ω50 A at 32 V K UL MFU 0603-FF PW 1A51.6 A 32 V 0.0065 A 2s 159 mV 76 m Ω50 A at 32 V EF UL/IEC MFU 0603-FF PW 1A61.75 A 32 V 0.0077 A 2s 138 mV 60 m Ω50 A at 32 V L UL MFU 0603-FF PW 1A752.0 A 32 V 0.0101 A 2s 150 mV 57 m Ω50 A at 32 V N UL/IEC MFU 0603-FF PW 2A02.5 A 32 V 0.0157 A 2s 121 mV 37 m Ω50 A at 32 V O UL MFU 0603-FF PW 2A53.0 A 32 V 0.0227 A 2s 126 mV 32 m Ω50 A at 32 V P UL MFU 0603-FF PW 3A03.15 A 32 V 0.0250 A 2s 120 mV 29 m Ω50 A at 32 V EL UL/IEC MFU 0603-FF PW 3A153.5 A 32 V 0.0308 A 2s 106 mV 23 m Ω50 A at 32 V R UL MFU 0603-FF PW 3A54.0 A 32 V 0.0403 A 2s 100 mV 19 m Ω50 A at 32 V S UL MFU 0603-FF PW 4A05.0 A32 V0.2275 A 2s85 mV13 m Ω50 A at 32 VTULMFU 0603-FF PW 5A0MFU 0805 RATING - very quick acting (FF)SIZEFUSE CHAR.RATED CURRENT (1)RATED VOLTAGE PRE-ARCING (2)I 2tat 10 x I RVOLT.DROP(2)at 1 x I R COLD RESIS (2)at 0.1 x I RBREAKINGCAPACITYDC MARK.APPROVAL ORDERING CODE (3) (4)0805FF500 mA 32 V 0.0009 A 2s 374 mV 570 m Ω50 A at 32 V F UL MFU 0805-FF PW 0A5630 mA 32 V 0.0014 A 2s 347 mV 420 m Ω50 A at 32 V CT UL MFU 0805-FF PW 0A63750 mA 32 V 0.0021 A 2s 280 mV 285 m Ω50 A at 32 V G UL MFU 0805-FF PW 0A75800 mA 32 V 0.0023 A 2s 262 mV 250 m Ω50 A at 32 V CV UL MFU 0805-FF PW 0A81.0 A 32 V 0.0028 A 2s 243 mV 185 m Ω50 A at 32 V H UL MFU 0805-FF PW 1A01.25 A 32 V 0.0040 A 2s 205 mV 125 m Ω50 A at 32 V J UL MFU 0805-FF PW 1A251.5 A32 V 0.0059 A 2s 171 mV 87 m Ω50 A at 32 V K UL MFU 0805-FF PW 1A51.6 A 32 V 0.0065 A 2s 164 mV 78 m Ω50 A at 32 V EF UL MFU 0805-FF PW 1A61.75 A 32 V 0.0077 A 2s 161 mV 70 m Ω50 A at 32 V L UL MFU 0805-FF PW 1A752.0 A 32 V 0.0101 A 2s 176 mV 67 m Ω50 A at 32 V N UL MFU 0805-FF PW 2A02.5 A 32 V 0.0157 A 2s 131 mV 40 m Ω50 A at 32 V O UL MFU 0805-FF PW 2A53.0 A 32 V 0.0227 A 2s 134 mV 34 m Ω50 A at 32 V P UL MFU 0805-FF PW 3A03.15 A 32 V 0.0250 A 2s 128 mV 31 m Ω50 A at 32 V EL UL MFU 0805-FF PW 3A153.5 A 32 V 0.0308 A 2s 119 mV 26 m Ω50 A at 32 V R UL MFU 0805-FF PW 3A54.0 A 32 V 0.0403 A 2s 105 mV 20 m Ω50 A at 32 V S UL MFU 0805-FF PW 4A05.0 A32 V0.2275 A 2s98mV15 m Ω50 A at 32 VTULMFU 0805-FF PW 5A0Thin Film Flat Chip FusesVishay BeyschlagNotes(1)Other values of rated current are available on request (2)Typical values(3)For packages with 1000 pieces, please use for packaging P1 instead of PW (4)For packages with 5000 pieces, please use for packaging P5 instead of PWDESCRIPTIONProduction is strictly controlled and follows an extensive set of instructions established for reproducibility. A homogeneous film of metal alloy is deposited on a high grade ceramic body. The fuse elements are covered by aprotective coating designed for electrical, mechanical and climatic protection. The terminations receive a final pure tin on nickel plating.The result of the determined production is verified by an extensive testing procedure performed on 100 % of the individual fuses. Only accepted products are laid directly into the paper tape in accordance with IEC 60286-3.APPROVALSThe fuses are tested in accordance with IEC 60127-4 and UL 248-14 which refers to UL 248-1, IEC 60127-1 and IEC 60068 series. VDE-approval of conformity is indicated by the UMF Logo on the package label. Recognition by Underwriter Laboratories Inc. is indicated by the UL logo on the package label.ASSEMBLYThe fuses are suitable for processing on automatic SMD assembly systems. They are suitable for automatic soldering using wave, reflow or vapour phase. The encapsulation is resistant to all cleaning solvents commonly used in the electronics industry, including alcohols, esters and aqueous solutions. The fuses are RoHS copmliant, the pure tin plating provides compatibility with lead (Pb)-free and lead-containing soldering processes. The immunity of the plating against tin whisker growth has been proven under extensive testing. All products comply with the CEF IC-EECA-EICT A list of legal restrictions on hazardous substances.This includes full compliance with the following directives:•2000/53/EC End of Vehicle life Directive (ELV)•2000/53/EC Annex II to End of Vehicle Life Directive (ELVII)•2002/95/EC Restriction of the use of Hazardous Substances Directive (RoHS)•2002/96/EC Waste Electrical and Electronic Equipment Directive (WEEE)Solderability is specified for 2 years after production or requalification. The permitted storage time is 20 years.MFU 1206 RATING - very quick acting (FF)SIZEFUSE CHAR.RATED CURRENT (1)RATED VOLTAGE PRE-ARCING (2)I 2tat 10 x I RVOLT.DROP(2)at 1 x I R COLD RESIS (2)at 0.1 x I RBREAKING CAPACITYDC MARK.APPROVAL ORDERING CODE (3) (4)1206FF500 mA63 V 0.0009 A 2s 433 mV 660 m Ω50 A at 63 V F UL/IEC MFU 1206-FF PW 0A5630 mA 63 V 0.0014 A 2s 372 mV 450 m Ω50 A at 63 V CT UL MFU 1206-FF PW 0A63750 mA 63 V 0.0022 A 2s 325 mV 330 m Ω50 A at 63 V G UL MFU 1206-FF PW 0A75800 mA 63 V 0.0023 A 2s 273 mV 260 m Ω50 A at 63 V CV UL MFU 1206-FF PW 0A81.0 A 63 V 0.0028 A 2s 262 mV 200 m Ω50 A at 63 V H UL/IEC MFU 1206-FF PW 1A01.25 A 63 V 0.0041 A 2s 230 mV 140 m Ω50 A at 63 V J UL MFU 1206-FF PW 1A251.5 A 63 V 0.0059 A 2s 207 mV 105 m Ω50 A at 63 V K UL MFU 1206-FF PW 1A51.6 A 63 V 0.0066 A 2s 168 mV 80 m Ω50 A at 63 V EF UL/IEC MFU 1206-FF PW 1A61.75 A 63 V 0.0077 A 2s 174 mV 76 m Ω50 A at 63 V L UL MFU 1206-FF PW 1A752.0 A 63 V 0.0102 A 2s 181 mV 69 m Ω50 A at 63 V N UL/IEC MFU 1206-FF PW 2A02.5 A 63 V 0.0159 A 2s 161 mV 49 m Ω50 A at 63 V O UL MFU 1206-FF PW 2A53.0 A 63 V 0.0229 A 2s 173 mV 44 m Ω50 A at 63 V P UL MFU 1206-FF PW 3A03.15 A 63 V 0.0251 A 2s 153 mV 37 m Ω50 A at 63 V EL UL/IEC MFU 1206-FF PW 3A153.5 A 63 V 0.0310 A 2s 161 mV 35 m Ω50 A at 63 V R UL MFU 1206-FF PW 3A54.0 A 63 V 0.0404 A 2s 147 mV 28 m Ω50 A at 63 V S UL MFU 1206-FF PW 4A05.0 A 63 V 0.2275 A 2s 131 mV 20 m Ω50 A at 63 V T UL MFU 1206-FF PW 5A06.3 A63 V0.5160 A 2s116 mV14 m Ω50 A at 63 VETULMFU 1206-FF PW 6A3Vishay Beyschlag Thin Film Flat Chip Fuses FUNCTIONAL PERFORMANCE ArrayTypical I-t Characteristic of MFU 0402Typical I2t vs. t Characteristic of MFU 0402Thin Film Flat Chip Fuses Vishay BeyschlagTypical I2t vs. t Characteristic of MFU 0603Vishay Beyschlag Thin Film Flat Chip FusesTypical I-t Characteristic of MFU 0805Typical I2t vs. t Characteristic of MFU 0805Thin Film Flat Chip Fuses Vishay BeyschlagTypical I2t vs. t Characteristic of MFU 1206Vishay Beyschlag Thin Film Flat Chip Fuses TEST AND REQUIREMENTSAll tests are carried out in accordance with the following specifications:IEC 60127-1, Miniature fuse - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-linksIEC 60127-4, Universal Modular Fuse Links (UMF)UL 248-1, Low voltage fuses - Part 1: General Requirements UL 248-14, Low voltage fuses - Part 14: Supplemental Fuses For the full test schedule refer to the documents listed above. The testing also covers most of the requirements specified by METI and CCC.The tests are carried out in accordance with IEC 60068 and under standard atmospheric conditions in accordance with IEC 60068-1, 5.3. Climatic category LCT/UCT/56 (rated temperature range: Lower Category Temperature, Upper Category Temperature; damp heat, long term, 56 days) is valid.Unless otherwise specified the following values apply:Temperature: 15 °C to 35 °CRelative humidity: 45 % to 75 %Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar).The components are mounted for testing on printed-circuit boards in accordance with IEC 60127-4, unless otherwise specified.The requirements stated in the Test Procedures and Requirements table are based on the required tests and permitted limits of IEC 60127-1 and IEC 60127-4 respectively. However, some additional tests and a number of improvements against those minimum requirements have been included.TEST PROCEDURES AND REQUIREMENTSIEC 60127-4 CLAUSEIEC60068-2TESTMETHODTEST PROCEDUREREQUIREMENTSPERMISSIBLE CHANGE (ΔR/R)8.3.221 (U e1)Substratebending Depth 1 mm;rate 1 mm/s1 timesNo visible damageΔR/R≤ ± 10 %8.6.258 (Td)Solderability Solder bath method; SnPb40;non-activated flux; (215 ± 3) °C;(3 ± 0.3) s Good tinning (≥ 95 % covered);no visible damageSolder bath method;SnAg3Cu0.5 or SnAg3.5; non-activated flux; (235 ± 3) °C; (2 ± 0.2) s Good tinning (≥ 95 % covered);no visible damage8.7.258 (Td)Resistance tosoldering heat Solder bath method;(260 ± 5) °C; (10 ± 1) sNo visible damageΔR/R≤ ± 10 % Reflow method 2(IR/forced gas convection);(260 ± 5) °C; (10 ± 1) sNo visible damageΔR/R≤ ± 10 %9.2.1-Time/currentcharacteristicsat nominaltemperature Cold resistance at 0.1 x I R;destructive testing underovercurrent conditions(DC-Current)MFU 0402I R ≤ 0.75 AAt 1.25 x I R, t pre-arc > 1 hat 2.0 x I R, t pre-arc < 10 sat 10 x I R, t pre-arc < 0.001 sMFU 04020.8 A≤ I R≤ 3.15 AAt 1.25 x I R, t pre-arc > 1 hat 2.0 x I R, t pre-arc < 10 sat 10 x I R, t pre-arc < 0.001 sMFU 0603I R ≤ 5.0 AMFU 0805I R ≤ 5.0 AMFU 1206I R ≤ 6.3 ADocument Number: 28747For technical questions, contact: ff3eresistors@MFU Series - Thin Film FuseThin Film Flat Chip FusesVishay Beyschlag9.3.2-Breaking capacity 50 A at rated voltage acc. to UL 248-14Optical inspection with naked eyeno visible damage 9.3.3-Residual resistance 50 A at rated voltage acc. to UL 248-14Insulation resistance at 2.0 x U R (DC)higher than 0.1 M Ω9.4-Endurance test acc. to IEC 60127-1a)I = 1.0 x I R (DC)1.0 h ON; 0.25 h OFF;23 °C; 100 times b)I = 1.25 x I R (DC)1.0 h ON 23 °C; 1 time MFU 0402I R ≤ 3.15 A No visible damage ΔR/R ≤ ± 10 %MFU 0603I R ≤ 3.15 A MFU 0805I R ≤ 3.15 A MFU 1206I R ≤ 3.15 A --Verification of temp.-rise and current- carrying capacity acc. to UL 248-14 clause 8.2.3I = 1.0 x I R (DC)MFU 0402I R ≤ 5.0 A Temperature rise of hot spot ≤ 75 Kacc. to UL 248-14 clause8.2.4MFU 0603I R ≤ 5.0 A MFU 0805I R ≤ 5.0 A MFU 1206I R ≤ 6.3 A9.5-Maximum sustaineddissipation acc. to IEC 60127-1Calculation in accordance with results of clause 9.4 b)Dissipation ≤ acc. to IEC 60127-4 table 29.7-Fuse-link temperatureThe test is performed during the final 5 min of clause 9.4 b)MFU 0402I R ≤ 3.15 A T emperature rise ofterminals ≤ 85 KMFU 0603I R ≤ 3.15 A MFU 0805I R ≤ 3.15 A MFU 1206I R ≤ 3.15 A-78 (Cab)Damp heat, steady state (40 ± 2) °C; 56 days;(93 ± 3) % RH ΔR/R ≤ ± 10 %I-t characteristic-14 (Na)Rapid change of temperature30min at LCT;30min at UCT; LCT = - 55 °C;UCT = 125 °C;5 cyclesΔR/R ≤ ± 10 %- 6 (Fc)VibrationEndurance by sweeping;10 to 2000 Hz;no resonance;amplitude ≤ 1.5 mm or ≤ 200 m/s 2; 6 h ΔR/R ≤ ± 10 %-45 (XA)Component solvent resistance Isopropyl alcohol;50 °C; method 2No visible damage-45 (XA)Solventresistance of marking Isopropyl alcohol;50 °C; method 1, toothbrush Marking legible,no visible damage -21 (Ue 3)Shear(adhesion)RR 1608M; 9NNo visible damage RR 2012M and RR 3216M; 45N --FlammabilityIEC 60695-2-2,needle flame test; 10 sNo burning after 30 sTEST PROCEDURES AND REQUIREMENTSIEC 60127-4 CLAUSE IEC 60068-2 TEST METHODTESTPROCEDUREREQUIREMENTSPERMISSIBLE CHANGE (ΔR/R ) For technical questions, contact: ff3eresistors@Document Number: 28747MFU Series - Thin Film FuseVishay BeyschlagThin Film Flat Chip FusesREVISION HISTORYCompared to the prior revision of this datasheet, 29-Jun-07, the following changes have been applied:•Rated current range extension of MFU 0402•Additional information of failure rate (FIT)•Test Procedures and Requirements extended for MFU 0402•No other change of technical contents •No product changeDisclaimer Legal Disclaimer NoticeVishayAll product specifications and data are subject to change without notice.Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products.No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay.The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.Product names and markings noted herein may be trademarks of their respective owners.元器件交易网Document Number: 。

※1: 測定周波数 Ｌ
331
330μH ± 20%
5.42
6.8μH ～ 8.2μH ; at 7.96 MHz 10μH ～ 82μH ; at 2.52 MHz
100μH ～ 330μH ; at 1 kHz
定格電流 (Ａ) ※2 1.57 1.38 1.28 1.19 0.97 0.94 0.81 0.71 0.64 0.59 0.54 0.52 0.49 0.41 0.39 0.30 0.28 0.25 0.23 0.20 0.18
捺印位置不定
２．コイル仕様 2-1.端子接続図(裏面図)
CDRH62の外形図とする。 シルク処理部 電極（端子）間の隙間はシルク処理をして御使用下さい。
4.6
7.4
RoHS
compliance
1
Cd:Max.0.01wt%
others:Max.0.1wt%
元器件交易网
仕様書
36
CDRH62NP-1Ø1MB
8R2
8.2μH ± 25%
100
10 μH ± 20%
120
12 μH ± 20%
150
15 μH ± 20%
180
18 μH ± 20%
220
22 μH ± 20%
270
27 μH ± 20%
330
33 μH ± 20%
390
39 μH ± 20%
470
47 μH ± 20%
07
CDRH62NP-22ØMC
220
08
CDRH62NP-27ØMC
270
09
CDRH62NP-33ØMC
330
10
CDRH62NP-39ØMC

FUTABA 6EXP固定翼/直升机两用版中文说明书目录一、发射器电池电压 (1)二、遥控器有关注意事项 (2)三、发射器程序设定 (3)（一）模型选择/数据重新设定/编码方式/模型类型/模型名称 (3)（二）REVR舵机反向 (5)（三）D/R双重比率/指数设定 (5)（四）EPA舵角调整功能 (6)（五）TRIM微调设定功能 (7)（六）PMIX1、2可编程混控设定功能（仅固定翼模式） (8)（七）FLPR副翼有襟翼设定功能（仅固定翼模式） (9)（八）FLTR襟翼微调功能（仅固定翼模式） (9)（九）V-TL V形混控设定功能（仅固定翼模式） (9)（十）ELVN飞翼混控设定功能（仅固定翼模式） (9)（十一）N-TH 常规飞行油门曲线功能（仅直升机模式） (9)（十二）N-PI常规螺距曲线功能（仅直升机模式） (10)（十三）I-TH惰速提高油门曲线（上空特技油门曲线）功能（仅直升机模式） (10)（十四）I-PI惰速提高螺距曲线功能（仅直升机模式） (11)（十五）HOLD油门保持功能（仅直升机模式） (11)（十六）REVO螺距--方向舵混控功能（仅直升机模式） (11)（十七）GYRO陀螺仪控制功能（仅直升机模式） (12)（十八）SW-T倾斜状态到油门混控（仅直升机模式） (13)（十九）SWSH十字盘模式选择& 十字盘模式最大舵角调整（仅直升机模式） (14)（二十）F/S安全控制（仅PCM模式下有效） (15)（二十一）油门关闭功能 (16)（二十二）改变6EXAP的控制杆模式 (16)（二十三）6EXP固定翼操作模式图解 (17)（二十四）6EXP直升机操作模式图解 (18)一、发射器电池电压除了模型的序号，LCD荧屏也显示发射器电池电压。

当电压低于8.5V 时，"电池"的图标将会以闪烁的状态出现在荧屏上，伴随着闪烁，发射机还会发出"哔哔。