当前位置：文档之家 › R04命令大全

R04命令大全

  • 格式：doc
  • 大小：198.00 KB
  • 文档页数：22

一、各种help命令:1.RAcmHelp 天线校准模块命令帮助RRU_LOG->RAcmHelpvalue = 1 = 0x1RRU_LOG->ShowDlAcImpact (wCarrNo) : 显示下行信道冲击响应幅值ShowDlAcFactor (wCarrNo) : 显示下行天线校准因子ShowDlFactor (wCarrNo) : 显示下行校准因子ShowDlFpgaFactor (wCarrNo) : 显示下行FPGA校准因子ShowDlPeakPos (wCarrNo) : 显示下行冲击相应峰值码片偏移ShowUlAcImpact (wCarrNo) : 显示上行信道冲击响应幅值ShowUlAcFactor (wCarrNo) : 显示上行天线校准因子ShowUlFactor (wCarrNo) : 显示上行校准因子ShowUlFpgaFactor (wCarrNo) : 显示上行FPGA校准因子ShowUlPeakPos (wCarrNo) : 显示上行冲击相应峰值码片偏移RAcmAcFactorEnable (bUL, bDL): 天线校准时使能天线校准因子RAcmSetAntThres (wThres) : 设置通道间差距阈值RAcmDlImpactThres (wThres) : 设置下行天线校准冲击响应信号有效性阈值RAcmUlImpactThres (wThres) : 设置上行天线校准冲击响应信号有效性阈值ShowAcPara () : 显示最近一次天线校准参数ShowAcCfg () : 显示天线校准配置参数ShowAcResult () : 显示天线校准内部结果ShowAcErr () : 显示天线校准天线特性结果ShowAcStat () : 显示天线校准统计信息ShowAcGain () : 显示天线校准增益ShowAcResult () : 显示天线校准内部错误码nRAcmSetChipOffset (wOffse t) : 显示计算信道冲击响应时的码片偏移RAcmACEnable (bEnable) : 开启(1)/关闭(0)天线校准功能RAcmAcPrtEn (bEnable) : 开启(1)/关闭(0)天线校准结果打印ShowAcSubFn (wDlUl, wCarrNo) : 显示天线校准过程各子帧幅相信息RAcmSetTxCal (swPwr) : 设置下行校正天线口输出功率RAcmSetRxCal (swPwr) : 设置上行校正天线口输出功率RAcmTest (wRruNum, wAcULDL, wCarrMask, wAntMask, wSubFnNum) : 手动发起天线校准功能Help 内部网络命令帮助RRU_LOG->netHelphostAdd "hostname","inetaddr" - add a host to remote host table;"inetaddr" must be in standardInternet address format e.g. "90.0.0.4" hostShow - print current remote host table netDevCreate "devname","hostname",protocol- create an I/O device to access fileson the specified host(protocol 0=rsh, 1=ftp)routeAdd "destaddr","gateaddr" - add route to route tablerouteDelete "destaddr","gateaddr" - delete route from route tablerouteShow - print current route tableiam "usr"[,"passwd"] - specify the user name by which youwill be known to remote hosts(and optional password)whoami - print the current remote IDrlogin "host" - log in to a remote host;"host" can be inet address orhost name in remote host tableType <CR> to continue, Q<CR> to stop:ifShow ["ifname"] - show info about network interfaces inetstatShow - show all Internet protocol sockets tcpstatShow - show statistics for TCPudpstatShow - show statistics for UDPipstatShow - show statistics for IPicmpstatShow - show statistics for ICMParptabShow - show a list of known ARP entries mbufShow - show mbuf statisticsEXAMPLE: -> hostAdd "wrs", "90.0.0.2"-> netDevCreate "wrs:", "wrs", 0-> iam "fred"-> copy <wrs:/etc/passwd /* copy file from host "wrs" */-> rlogin "wrs" /* rlogin to host "wrs" */value = 1 = 0x13.h 历史命令帮助列出历史使用过的命令.二、各种查看RRU状态命令:1.版本查询:SVI 软件版本查询(HVI 硬件版本查询)RRU_LOG->SVIvalue = 1 = 0x1RRU_LOG->-> ======== Software Vertion Info ========->C/B TYPE SOFTV HARDV SIZE1 SIZE2 TIME->C CPU : zRiicC508_2 0 10184906 687358 2036-11-26 9 :16:59->B CPU : zRiicC508_5 0 10184922 687271 14184-19-0 88:102:217 ->C FPGA: RIICV111100f 1 1305558 259494 1 -0 -0 0 :96:102 ->B FPGA: RiicV1114f 1 1305558 259494 0000-00-00 00:00:00->C EPLD:->B EPLD:->The End.Version 所有版本查询VersionRIIC HARD ID is : 0x2800RIIC EPLD Version is : 0value = 1 = 0x1RRU_LOG->Pcb 硬件版本: 0x2Epld 硬件版本: 0x0BOOT 软件版本: RIICV1.11.100dCPU 软件版本: zRiicC508_2FPGA 软件版本: RIICV111100fEPLD 软件版本: ERROR2.ShowRRUStat RRU状态查询RRU_LOG->ShowRRUStatvalue = 1 = 0x1RRU_LOG->=========== RRU Status Info ==============RRUStat: Work!RFCh Stat: 0, 0, 0, 0RFCh Man Stat: 0, 0, 0, 0RRULinkStat: BBU:1 485:1RRULogStat: Log:0 Mode:0RRUHWInit: 1RRURecvMateRstRsp: 1RRURecvResetRsp: 1RRURecvInitCfg: 1RRUStartOK: 1RRURecvOptModeFlag:1RRU OptMode:IN_NORMAL3.HDS 主从关系查询RRU_LOG->HDSvalue = 1 = 0x1RRU_LOG->-> ======== Hardware Status ========->485 master-slave state:master->Calibration master-slave state: slave->Clock master-slave state: master, in/out enable->FPGA Work Mode: normal mode->FPGA Adjust Type: NoAdjMode->Carrier Status: Ca1-On Ca2-Off Ca3-Off Ca4-Off Ca5-Off Ca6-Off ->RFCh Status: Ch1-On Ch2-On Ch3-On Ch4-On->TxIFAttenuate(RegVal): Ch1-33h Ch2-32h Ch3-33h Ch4-31h->RxIFAttenuate(RegVal): Ch1-2fh Ch2-30h Ch3-32h Ch4-2dh->Tx-Rx Switch Point: between ts3 and ts4->PLL Status:->LO PLL: Lock->81.92M PLL: Lock->62.5M PLL: Lock->10M PLL: Lock->Clk Status:->100Hz CLK: ok->IF(81.92M) CLK: ok->M for more..., Q for quit.Mvalue = 1 = 0x1RRU_LOG->->Optic(62.5M) CLK: ok->10MHz CLK: ok->IQ Cable UL: ok IQ Cable DL: ok->ANT1 DAC PLL: ok->ANT2 DAC PLL: ok->ANT3 DAC PLL: ok->ANT4 DAC PLL: ok->ANT1 DUC timing: ok->ANT2 DUC timing: ok->ANT3 DUC timing: ok->ANT4 DUC timing: ok->ANT1 DDC timing: ok->ANT2 DDC timing: ok->ANT3 DDC timing: ok->ANT4 DDC timing: ok->OVRTMP: ok->OVRPWR: ok->LOWPWR: ok->The End.4.CFG 射频资源和光纤时延CFGvalue = 1 = 0x1RRU_LOG->-> ======== BBU Configuration Info ========->RRUNum: 2->AntNum: 8->wAntPath: 0fh->LOFreq: 9374->FreqNum: 1->OptMode: IN_NORMAL->Carrier Cfg Info:-> CarrNo No1 No2 No3 No4 No5 No6 -> 1.CfgAttr: Valid InValid InValid InValid InValid InValid -> 2.RadioFreq:10062 0 0 0 0 0-> 3.MainCarr: 1 0 0 0 0 0-> 4.MaxTxPwr: 390 0 0 0 0 0-> 5.DwPchPwr: 290 0 0 0 0 0->SlotSWPoint: slot3~slot4->Fiber Delay Cfg Info:-> Tdown: 13 (62.5M) FbTadv:24986 (62.5M)-> IQOffsetDL:485 (chip) IQOffsetUL:-477 (chip)->IQ[Carr-Slot]: 0-0, 1-0, 2-0, 3-0, 4-0, 5-0->M for more..., Q for quit.5.PLL 各种锁相环状态查询RRU_LOG->PLLvalue = 1 = 0x1RRU_LOG->-> ======== PLL Status ========->LO PLL: Lock->81.92M PLL: Lock->62.5M PLL: Lock->10M PLL: Lock->-> ======== Clk Status ========->100Hz CLK: ok->IF(81.92M) CLK: ok->Optic(62.5M) CLK: ok->10MHz CLK: ok->10M PLL Status Info:->-> status 累计相位差输出DA 状态累计时间-> LOCKED 1 0x405b 19262->-> warning : 无->-> PLL 10M Code Version Build 061113(0.6ppm).->M for more..., Q for quit.Mvalue = 1 = 0x1RRU_LOG->->->10M PLL History Records:->No Time Status KeepCnt TurnCnt LOST DA_OVER DITHER FREQ_OVER_PPM ->1 2000-1 -1 0 :0 :53 UnLock 11 0 0 0 0 0->2 2006-11-29 9 :38:57 Lock 1956 1 0 0 0 0->3 0 -0 -0 0 :0 :0 --- 0 0 0 0 0 0->4 0 -0 -0 0 :0 :0 --- 0 0 0 0 0 0 ->5 0 -0 -0 0 :0 :0 --- 0 0 0 0 0 0 ->6 0 -0 -0 0 :0 :0 --- 0 0 0 0 0 0 ->7 0 -0 -0 0 :0 :0 --- 0 0 0 0 0 0 ->8 0 -0 -0 0 :0 :0 --- 0 0 0 0 0 0 ->9 0 -0 -0 0 :0 :0 --- 0 0 0 0 0 0 ->10 0 -0 -0 0 :0 :0 --- 0 0 0 0 0 0 ->11 0 -0 -0 0 :0 :0 --- 0 0 0 0 0 0 ->12 0 -0 -0 0 :0 :0 --- 0 0 0 0 0 0 ->13 0 -0 -0 0 :0 :0 --- 0 0 0 0 0 0 ->14 0 -0 -0 0 :0 :0 --- 0 0 0 0 0 0 ->15 0 -0 -0 0 :0 :0 --- 0 0 0 0 0 0 ->16 0 -0 -0 0 :0 :0 --- 0 0 0 0 0 0 ->17 0 -0 -0 0 :0 :0 --- 0 0 0 0 0 0->M for more..., Q for quit.6.ifShow 查询RRU的地址信息RRU_LOG->ifShowmotfec (unit number 0):Flags: (0x8063) UP BROADCAST MULTICAST ARP RUNNINGType: ETHERNET_CSMACDInternet address: 100.191.2.9Broadcast address: 100.255.255.255Netmask 0xff000000 Subnetmask 0xff000000Ethernet address is 88:88:88:88:88:88Metric is 0Maximum Transfer Unit size is 15002388 packets received; 1562 packets sent929 multicast packets received101 multicast packets sent0 input errors; 0 output errors0 collisions; 0 droppedlo (unit number 0):Flags: (0x8069) UP LOOPBACK MULTICAST ARP RUNNINGType: SOFTWARE_LOOPBACKInternet address: 127.0.0.1Netmask 0xff000000 Subnetmask 0xff000000Metric is 0Maximum Transfer Unit size is 327680 packets received; 0 packets sent0 multicast packets received0 multicast packets sent0 input errors; 0 output errors0 collisions; 0 droppedrruSig (unit number 1):Flags: (0x8063) UP BROADCAST MULTICAST ARP RUNNING Type: ETHERNET_CSMACDInternet address: 200.20.4.1Broadcast address: 200.20.255.255Netmask 0xffff0000 Subnetmask 0xffff0000Ethernet address is 00:0d:0d:00:02:01Metric is 0Maximum Transfer Unit size is 150066206 packets received; 39647 packets sent0 multicast packets received0 multicast packets sent0 input errors; 0 output errors0 collisions; 0 droppedvalue = 29 = 0x1d7.DALM 查询前台告警RRU_LOG->DALMvalue = 1 = 0x1RRU_LOG->-> ======== Total Alarm Info ========->RLPB1_OFFLNDATA_ALM->RLPB2_OFFLNDATA_ALM->RLPB3_OFFLNDATA_ALM->RLPB4_OFFLNDATA_ALM->ANT2_ALM->ANT3_ALM->PWRL1_ALM->PWRL2_ALM->PWRL3_ALM->PWRL4_ALM->The End.8.showeedatareal 离线参数查看RRU_LOG->showeedatareal==========RIIC校准整体参数===============POutMin FixRxPc GCable-11.0000 41.0000 -1.5000==========RIIC校准预定义参数===============T0 IF0 IF1 IF2 IF3 IF4 IF5 RF0 RF1 RF2 RF3 RF425 1360 1376 1392 1408 1424 1440 20108 20136 20174 20202 20242==========RIIC Tx功率校准公共参数===============GCfgHeadC1 GCfgHeadC2 GCfgHeadC3 GCfgHeadC4 GCfgHeadC5 GCfgHeadC60.00 3.01 4.77 6.02 6.99 7.78ThCfrC1 ThCfrC2 ThCfrC3 ThCfrC4 ThCfrC5 ThCfrC62.60 2.60 2.60 2.60 2.60 2.60GDucC1 GDucC2 GDucC3 GDucC4 GDucC5 GDucC6-8.20 -8.20 -8.20 -8.20 -8.20 -8.20DAif GPgcIfTxMin GPgcIfTxStep PhaDiffMaxPgcTx18.00 -31.50 0.50 4.00……9.testGROM(X,Y,"Z") 线缆损耗查询X-载波Y-通道Z可取r,t,d三个值,对应如下:r—接收通道t—发射通道d—检测通道10.CS 切换时钟主从11.PLL10MshowState RRU 10M锁相环状态查询12.PLL10MSetPrint 1/ PLL10MSetPrint 打开/关闭锁相环打印13.ShowCfgInfo 查看光纤时延测量数据14.BspGetRruId 读取RRU ID15.LI/LO 进入/退出本地操作维护模式16.LSTAT 显示RRU与BBU建链状态，和主从RRU的通讯状态17.EXC “cpu” cpu版本主备倒换FPGA版本同样适用.18.TI/TO 进入/退出测试模式19.DUB/DCPU 显示UB状态/显示CPU状态三、功率校准和天线校准类命令:1.ShowDlAcImpact 显示下行信道冲击响应幅值RRU_LOG->ShowDlAcImpactvalue = 1 = 0x1RRU_LOG->DL Carr 0 I Q Amp Angle Ant0: 1344.5474, -6433.0239, 6572.0317 281.0000Ant1: 671.3334, -6185.2354, 6221.5610 276.0000Ant2: 4109.4248, -5063.7114, 6521.3911 309.0000Ant3: 5794.5918, 2091.2224, 6160.3984 20.0000Ant4: 2970.8931, -5566.2251, 6309.4429 298.0000Ant5: 5616.5396, 2828.2798, 6288.4565 27.0000Ant6: 5552.4829, 2460.3516, 6073.1704 24.0000Ant7: -5006.7744, -3438.6968, 6073.9136 214.00002.ShowDlAcFactor 显示下行天线校准因子ShowDlAcFactorvalue = 1 = 0x1RRU_LOG->DL Carr00.1890568, 0.90454730.1053307, 0.97044940.5868350, 0.72310920.9273009, -0.33465560.4532319, 0.84916910.8625736, -0.43435990.9142643, -0.4051182-0.8242069, 0.56607263.ShowDlFactor 显示下行校准因子ShowDlFactorvalue = 1 = 0x1RRU_LOG->DL Carr00.1870188, 0.89479650.0998990, 0.92040530.5789671, 0.71341420.8888545, -0.32078061.0000000, 0.00000001.0000000, 0.00000001.0000000, 0.00000001.0000000, 0.00000004.ShowDlFpgaFactor 显示下行FPGA校准因子ShowDlFpgaFactorvalue = 1 = 0x1RRU_LOG->DL Carr03064, 146601637, 150809486, 1168914563, -525616384, 016384, 016384, 016384, 05.ShowDlPeakPos 显示下行冲击相应峰值码片偏移RRU_LOG->ShowDlPeakPosvalue = 1 = 0x1RRU_LOG->DL Carr0SubFnNo 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16Ant0 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2Ant1 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6Ant2 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10Ant3 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14Ant4 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18Ant5 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22Ant6 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26Ant7 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 306.ShowUlAcImpact 显示上行信道冲击响应幅值RRU_LOG->ShowUlAcImpactvalue = 1 = 0x1RRU_LOG->UL Carr 0 I Q Amp Angle Ant0: -1415.6183, -226.5263, 1433.6281 189.0000Ant1: 957.8406, 943.9531, 1344.8070 45.0000Ant2: -141.9297, -1397.2720, 1404.4618 264.0000Ant3: -1326.4048, 130.8282, 1332.8412 174.0000Ant4: 554.2574, 1099.6829, 1231.4640 63.0000Ant5: -590.4179, -1084.6726, 1234.9526 241.0000Ant6: -709.8284, 886.9622, 1136.0273 129.0000Ant7: 186.8127, 1133.0388, 1148.3362 81.00007.ShowUlAcFactor 显示上行天线校准因子RRU_LOG->ShowUlAcFactorvalue = 1 = 0x1RRU_LOG->UL Carr0-0.7824598, 0.12520870.6016752, -0.5929516-0.0817414, 0.8047294-0.8482192, -0.08366300.4151995, -0.8237830-0.4397924, 0.8079544-0.6248339, -0.78075770.1609375, -0.97610278.ShowUlFactor 显示上行校准因子ShowUlFactorvalue = 1 = 0x1RRU_LOG->UL Carr0-0.7803500, 0.12487110.5943419, -0.5857245-0.0781173, 0.7690501-0.8425231, -0.08310121.0000000, 0.00000001.0000000, 0.00000001.0000000, 0.00000001.0000000, 0.00000009.ShowUlFpgaFactor 显示上行FPGA校准因子RRU_LOG->ShowUlFpgaFactorvalue = 1 = 0x1RRU_LOG->UL Carr0-12785, 20469738, -9597-1280, 12600-13804, -136216384, 016384, 016384, 016384, 010.ShowUlPeakPos 显示上行冲击相应峰值码片偏移RRU_LOG->ShowUlPeakPosvalue = 1 = 0x1RRU_LOG->UL Carr0SubFnNo 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16Ant0 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6Ant1 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6Ant2 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6Ant3 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 611.RAcmAcFactorEnable 天线校准时使能天线校准因子RAcmAcFactorEnablevalue = 0 = 0x012.ShowAcPara 显示最近一次天线校准参数howAcParaRRU_LOG->gtRAcmManagerInfo.wStatus = 0 gtRAcmManagerInfo.wAcRruNum = 2gtRAcmManagerInfo.wAcType = 3gtRAcmManagerInfo.wSubFnNum = 16gtRAcmManagerInfo.wAcPathMask = 255gtRAcmManagerInfo.wAcCarrierMask = 1gtRAcmManagerInfo.wCfgCarrierMask = 1gtRAcmManagerInfo.wAcResult = 0gtRAcmManagerInfo.wCalRruStatus = 1gtRAcmManagerInfo.dblAcAmpDiffThres = 4.000000 gtRAcmManagerInfo.dblAcSubFnAmpDiffThres = 3.000000 gtRAcmManagerInfo.wAcSubFnAngleDiffThres = 513.ShowAcCfg 显示天线校准配置参数RU_LOG->ShowAcCfgvalue = 1 = 0x1RRU_LOG->AC Enable = 1Calc Impact Chip Offset= 32Pant_downcal = 19.00Pant_upcal = -30.00DL AC SEQ AMPwCarrNo = 0 SEQ_AMP = 2319wCarrNo = 1 SEQ_AMP = 955wCarrNo = 2 SEQ_AMP = 955wCarrNo = 3 SEQ_AMP = 955wCarrNo = 4 SEQ_AMP = 955wCarrNo = 5 SEQ_AMP = 955UL AC SEQ AMPwCarrNo = 0 SEQ_AMP = 1136wCarrNo = 1 SEQ_AMP = 3754wCarrNo = 2 SEQ_AMP = 3754wCarrNo = 3 SEQ_AMP = 3754wCarrNo = 4 SEQ_AMP = 3754wCarrNo = 5 SEQ_AMP = 375414.ShowAcErr 显示天线校准天线特性结果RU_LOG->ShowAcErrRRU_LOG->Carr 0: DL Error Code = 40Carr 0: UL Error Code = 0Carr 1: DL Error Code = 0Carr 1: UL Error Code = 0Carr 2: DL Error Code = 0Carr 2: UL Error Code = 0Carr 3: DL Error Code = 0Carr 3: UL Error Code = 0Carr 4: DL Error Code = 0Carr 4: UL Error Code = 0Carr 5: DL Error Code = 0Carr 5: UL Error Code = 0Error Code = 3x 代表天线校准过程通道x各子帧一致性检测不通过= 4x 代表天线通道x无有效数据= 5x 代表天线通道x与其它通道差异性过大15.ShowAcStat 显示天线校准统计信息ShowAcStatvalue = 1 = 0x1RRU_LOG->AC Statistic Info:AC Count = 38AC Inner Err Count = 3The Last AC Mode: DL + UL ACThe Last AC Time: 2006-11-29 14:37:0916.ShowAcGain 显示天线校准增益RRU_LOG->ShowAcGainvalue = 1 = 0x1RRU_LOG->DL AC Gain:Ant1 Ant2 Ant3 Ant4Carr0 -0.69 -0.21 -0.62 -0.12Carr1 0.00 0.00 0.00 0.00Carr2 0.00 0.00 0.00 0.00Carr3 0.00 0.00 0.00 0.00Carr4 0.00 0.00 0.00 0.00Carr5 0.00 0.00 0.00 0.00UL AC Gain:Ant1 Ant2 Ant3 Ant4Carr0 -2.02 -1.47 -1.84 -1.39Carr1 0.00 0.00 0.00 0.00Carr2 0.00 0.00 0.00 0.00Carr3 0.00 0.00 0.00 0.00Carr4 0.00 0.00 0.00 0.00Carr5 0.00 0.00 0.00 0.0017.ShowAcSubFn (wDlUl, wCarrNo) 显示天线校准过程各子帧幅相信息下行:RRU_LOG->ShowAcSubFn 0,0value = 1 = 0x1RRU_LOG->RRU_LOG->DL Carr0++++Amp Value++++Amp Ant1 Ant2 Ant3 Ant4 Ant5 Ant6 Ant7 Ant8SubFn0 6576.05 6220.71 6515.93 6149.90 6317.12 6291.66 6070.306070.25SubFn1 6575.17 6224.01 6520.55 6157.12 6307.36 6289.83 6075.916074.52SubFn2 6579.58 6220.51 6522.74 6164.29 6314.55 6284.38 6076.076073.36SubFn3 6565.83 6226.47 6517.86 6160.53 6307.54 6288.16 6075.736075.95SubFn4 6571.74 6218.39 6522.16 6161.18 6306.79 6287.30 6071.866080.51SubFn5 6577.95 6219.56 6521.03 6163.03 6309.73 6284.87 6070.076074.81SubFn6 6577.09 6220.47 6523.89 6160.95 6312.23 6291.90 6075.816073.78SubFn7 6568.79 6231.55 6519.74 6162.81 6304.45 6291.66 6080.546068.49SubFn8 6576.39 6224.62 6525.45 6160.39 6309.10 6288.50 6079.076071.36SubFn9 6566.55 6223.78 6517.60 6163.66 6313.07 6287.55 6072.316070.20SubFn10 6575.25 6215.05 6523.02 6160.99 6304.34 6289.18 6073.39 6074.87SubFn11 6568.52 6219.32 6520.15 6165.84 6308.55 6295.08 6069.24 6076.05SubFn12 6569.70 6216.76 6519.46 6156.72 6308.86 6284.49 6069.81 6073.71SubFn13 6570.09 6222.76 6523.13 6163.65 6311.52 6285.73 6072.43 6070.95SubFn14 6564.42 6219.88 6524.60 6157.66 6310.19 6288.46 6069.00 6080.63SubFn15 6569.41 6221.15 6524.96 6157.66 6305.69 6286.56 6069.19 6073.18++++Angle Value++++Angle Ant1 Ant2 Ant3 Ant4 Ant5 Ant6 Ant7 Ant8 SubFn0 281.00 276.00 309.00 20.00 298.00 27.00 24.00 214.00 SubFn1 281.00 276.00 309.00 20.00 298.00 27.00 24.00 215.00 SubFn2 281.00 276.00 309.00 20.00 298.00 27.00 24.00 214.00 SubFn3 281.00 276.00 309.00 20.00 298.00 27.00 24.00 214.00 SubFn4 281.00 276.00 309.00 20.00 298.00 27.00 24.00 214.00 SubFn5 281.00 276.00 309.00 20.00 298.00 27.00 24.00 214.00 SubFn6 281.00 276.00 309.00 20.00 298.00 27.00 24.00 215.00 SubFn7 281.00 276.00 309.00 20.00 298.00 27.00 24.00 214.00 SubFn8 281.00 276.00 309.00 20.00 298.00 27.00 24.00 214.00 SubFn9 281.00 276.00 309.00 20.00 298.00 27.00 24.00 214.00 SubFn10 281.00 276.00 309.00 20.00 298.00 27.00 24.00 214.00 SubFn11 281.00 276.00 309.00 20.00 298.00 27.00 24.00 215.00 SubFn12 281.00 276.00 309.00 20.00 298.00 27.00 24.00 214.00 SubFn13 281.00 276.00 309.00 20.00 298.00 27.00 24.00 215.00 SubFn14 281.00 276.00 309.00 20.00 298.00 27.00 24.00 215.00 SubFn15 281.00 276.00 309.00 20.00 298.00 27.00 24.00 214.00上行:ShowAcSubFn 1,0value = 1 = 0x1RRU_LOG->RRU_LOG->UL Carr0++++Amp Value++++Amp Ant1 Ant2 Ant3 Ant4SubFn 0 1447.00 1370.19 1480.00 1345.77SubFn 1 1447.16 1370.66 1481.31 1348.99SubFn 2 1445.86 1368.95 1478.34 1347.47SubFn 3 1447.98 1364.27 1477.82 1347.22SubFn 4 1450.42 1365.18 1476.72 1345.99SubFn 5 1448.69 1367.95 1481.88 1345.89SubFn 6 1446.01 1367.67 1477.48 1347.94SubFn 7 1447.04 1368.04 1475.97 1345.65SubFn 8 1445.50 1368.87 1474.15 1347.31SubFn 9 1445.48 1367.25 1477.37 1352.58SubFn10 1447.18 1367.36 1475.91 1347.67SubFn11 1447.47 1368.48 1476.42 1348.87SubFn12 1448.15 1370.92 1476.62 1347.79SubFn13 1445.36 1367.27 1478.90 1347.44SubFn14 1445.68 1367.58 1477.04 1347.53SubFn15 1447.35 1369.70 1477.79 1348.02++++Angle Value++++Angle Ant1 Ant2 Ant3 Ant4SubFn0 194.00 50.00 269.00 179.00SubFn1 194.00 50.00 269.00 179.00SubFn2 194.00 50.00 269.00 179.00SubFn3 194.00 50.00 269.00 179.00SubFn4 194.00 50.00 269.00 179.00SubFn5 194.00 50.00 269.00 179.00SubFn6 194.00 50.00 269.00 179.00SubFn7 194.00 50.00 269.00 179.00SubFn8 194.00 50.00 269.00 179.00SubFn9 194.00 50.00 269.00 179.00SubFn10 194.00 50.00 269.00 179.00SubFn11 194.00 50.00 269.00 179.00以上命令在RAcmHelp帮助里都有详细说明,使用时可以通过该命令查看,该帮助中还有一些设置类命令没有列出来大家有环境的时候可以实际操作一下.18.showantpwr 查询前台DW实际功率和配置功率RRU_LOG->showantpwrvalue = 1 = 0x1RRU_LOG->Real power detection result:PathNo CarrNo Antnum CfgPwr DetectPwr AntPwr(剔除AC影响)0 0 8 19.9691 -0.2309 0.45481 0 8 19.9691 19.9054 20.11502 0 8 19.9691 19.5730 20.19153 0 8 19.9691 19.7543 19.878219.showrxgain, showtxgain 当前上下行增益查询RRU_LOG->showrxgain===============当前计算出来的上行增益分布===============Path Car FixG IFPGC CompFine McDiff ACRG ACAG TargetGain0 0 49.02 -8.00 -0.02 0.00 -2.02 2.98 41.001 0 48.61 -7.50 -0.11 0.00 -1.47 -0.78 41.002 0 47.89 -6.50 -0.39 0.00 -1.84 1.67 41.003 0 50.06 -9.00 -0.06 0.00 -1.39 -3.04 41.00value = 1 = 0x1RU_LOG->showtxgain======================小区建立后的下行增益分布=======================Path Car IQPwr FixG PCFG IFPGC CompFine McDiff ACRG ACAGTxPwr0 0 -12.00 48.09 0.00 -6.00 -0.09 0.00 -0.69 1.36301 0 -12.00 48.96 0.00 -6.50 -0.46 0.00 -0.21 1.46302 0 -12.00 48.12 0.00 -6.00 -0.12 0.00 -0.62 0.89303 0 -12.00 49.37 0.00 -7.00 -0.37 0.00 -0.12 -0.3530value = 1 = 0x120.Startpcpro/Stoppcpro 打开/关闭上电时自动功率校准21.showinittxgain,showinitrxgain 初始功率校准结果RRU_LOG->showinittxgain========================初始校准后的下行增益分布=============================Path IQPwr FixG PCFG IFPGC CompFine McDiff TxPwr0 -12.13 47.87 0.00 -7.50 -0.24 0.00 28.001 -12.13 49.15 0.00 -9.00 -0.02 0.00 28.002 -12.13 48.18 0.00 -8.00 -0.05 0.00 28.003 -12.13 49.43 0.00 -9.00 -0.30 0.00 28.00value = 1 = 0x1RRU_LOG->showinitrxgain=======================初始功率校准后的上行增益分布=========================Path FixG IFPGC CompFine McDiff TargetGain0 49.06 -8.00 -0.06 0.00 41.001 48.79 -7.50 -0.29 0.00 41.002 47.99 -6.50 -0.49 0.00 41.003 49.85 -8.50 -0.35 0.00 41.00value = 1 = 0x122.showtxdisgain,showrxdisgain 功率校准计算得上下行固定增益RRU_LOG->showtxdisgain=========================当前功率校准计算的下行通道固定增益分布=========================Path Car GDuc GDelta_IF GRtrb_Tx GCable GPa GFil GCable_Ant0 0 -8.20 0.04 15.22 -3.62 45.35 -0.70 0.001 0 -8.20 0.04 15.54 -3.10 45.38 -0.70 0.002 0 -8.20 0.04 15.55 -3.95 45.38 -0.70 0.003 0 -8.20 0.05 15.77 -2.93 45.38 -0.70 0.00value = 74 = 0x4a = 'J'RRU_LOG->showrxdisgain=================当前功率校准计算的上行通道固定增益分布===============Path Car GDdc GDelta_IF GRtrb_Rx GCable GLna GFil GCable_Ant0 0 0.00 0.06 19.94 -0.17 29.90 -0.70 0.001 0 0.00 0.06 18.78 0.57 29.90 -0.70 0.002 0 0.00 0.05 19.87 -1.22 29.90 -0.70 0.003 0 0.00 0.04 20.05 0.77 29.90 -0.70 0.00value = 74 = 0x4a = 'J'23.Starttricpc/Stoptricpc 实时功率校准的触发四、BSP相关命令:1.BspGetFpgaReg(0x16) RRU FPGA是否检测到帧头丢失告警RRU_LOG->BspGetFpgaReg(0x16)value = 0 = 0x02.BspGetFpgaReg(0xXX) 中频衰减器查询0xa8--0xab 上行中频衰减器0xa4--0xa7 下行中频衰减器IFPGC 63----0(取值范围)RRU_LOG->BspGetFpgaReg(0xa8)3.BspSetFpgaReg(0xa8,IFPGC) 中频衰减器设置0xa8--0xab 上行中频衰减器0xa4--0xa7 下行中频衰减器IFPGC 63----0(取值范围)4.BspSetFpgaReg (0xca,0xXX) 通道设置关闭所有通道:BspSetFpgaReg 0xca,0x0BspSetFpgaReg 0xcb,0x0打开所有通道:BspSetFpgaReg 0xca,0xffBspSetFpgaReg 0xcb,0xff打开通道1:BspSetFpgaReg 0xca,0x0f。

合集下载

R5常用命令

R5常用命令

sysNvDataShow：查看基站ID, 启动数据源，网管地址，基站处的VLAN。

sysNvDataModify：改上述配置。

(mcwill)l3BootlineShow：查看3层软件的启动设置sysSetL3Bootline:修改3层软件的启动设置（c）l2BootlineShow：查看2层软件的启动设置sysSetL2Bootline:修改2层软件的启动设置(C)routeShow：查看基站的路由信息arpShow：查看基站的ARP表, <区别于ARPShow>ifShow：查看基站的网口信息，是到基站IP地址的一些协议分析。

sysI2cShow: 查看基带板版本,版号,MAC地址等L3 配置：bts(0x9838001) L3->l3BootlineShowboot device : ataaunit number : 0processor number : 0host name : yxfile name : l3_imageinet on ethernet (e) : 10.5.11.190:ffffff00inet on backplane (b): 10.0.0.1host inet (h) : 10.5.11.180gateway inet (g) : 10.5.11.180user (u) : btsftp password (pw) : btsflags (f) : 0x0target name (tn) : 0startup script (s) : 0other (o) : mvL2 配置bts(0x9838001) L3->l2BootlineShowboot device : mvunit number : : 0processor number : 0host name : btsL2file name : l2_image.bininet on ethernet (e) : 10.5.11.191:ffffff00inet on backplane (b): 10.0.0.2host inet (h) : 10.5.11.180gateway inet (g) : 10.5.11.180user (u) : btsftp password (pw) : btsflags (f) : 0x0other (o) : 0.250.5.115mcwill配置：bts(0x9838001) L3->sysNvDataShowbtsId: :9838001vlanID: :0dataSource :btsmain EMS IP :10.5.11.180main EMS RX port :3999BTS RX port :8002BTS public IP :10.5.11.190BTS public port :8002Reboot BTS when W AN IF disconnected: noPPPoE packet forward: yesFilter STP packet: yesReboot BTS when FTP is down:noBTS NetWork Para:BTS NetWork Para Is default:100M Auto Permit use when SAG is down:nodate/time :[11/3/2009 10:39:21]。

Reg命令大全

Reg命令大全

Reg命令⼤全1. REG ADD ⽤该命令加⼊⼀个新的指定键值，从给出的例⼦⽂件来看，基本的使⽤⽅法如下：命令－计算机名称－根键名－［⼦键名称－类型－数据］下⾯是更详细、规范的表述：REG ADD [\\Machine\]Keyname [/v ValueName | /ve] [/t Type] [/s Separator] [/d Data] [/f]参数及说明：Machine ： 计算机名称，此处关于计算机名称的介绍，其它命令也将使⽤,请注意．以Machine指定远程计算机名称，如果省略，默认值是使⽤当前的本地计算机，不能使⽤驱动器名来指定远程计算机名．计算机名称前⾯的双反斜杠符号不能省去．如：\\MYDIAC 就是⼀个正确的范例．Keyname ：键名，此处关于键名的解释，其它命令也将使⽤，请注意．格式：[Rootkey\]KeyRootkey 是根键根键可以使⽤以下形式的简写:根键名简写形式HKEY_LOCAL_MACHINEHKLMHKEY_CURRENT_USERHKCUHKEY_CLASSES_ROOTHKCRHKEY_CURRENT_CONFIGURATIONHKCC注意： HKLM 和 HKCU 键值仅适⽤与远程计算机。

Key ：⼦键所选根键之下的⼦键的完整名字/v Valuename 向指定注册表加⼊新键值的名称，如果包含有空格，则字符串应使⽤引号/ve 加⼊的空键值名/t type 指定使⽤的数字或字符串的类型，这些类型与win9x相同，这⾥不再详细介绍．/s Separator 指定注册表使⽤的数据字符串的分隔字符，例如使⽤REG_MULTI_SZ类型时.默认情况下就 "\o" 作为分隔字符。

/f 允许覆盖现存的注册表/d Data 向注册表中的指定键以指定数据赋于键值2. REG COMPARE 将当前（本地计算机）的注册表与另外⼀个注册表或另外⼀个远程计算机上的注册表进⾏⽐较．将⽐较结果输出到⼀个⽂件上．REG COMPARE [\\Machine\]Keyname1 [\\Machine\]Keyname2 [/v ValueName] | /ve] [/s] [Output]参数及说明：Machine ： 指定的计算机名称．含义与上⾯⼀样Keyname1, Keyname2： 注册表的键名，含义及格式与上⾯⼀样/V Valuename： 进⾏⽐较的键值的名称，如果包含有空格，则字符串应使⽤引号/VE, /ve ⽐较默认（⽆键名的）键值/S, /s ： ⽐较所有⼦键Output 输出 以下列形式的开关参数控制输出结果：/OA,/oa：输出全部的不同部分与相同部分/OD,/od：仅输出不同部分；　/OS,/os：仅输出相同部分/ON,/on没有任何输出返回代码的含义:0：成功地进⾏了⽐较，⽐较的结果是⼆者相同1：⽐较过程失败； 2-成功地进⾏了⽐较，⽐较的结果是⼆者不相同3.REG COPY 将当前的注册表或远程计算机上的注册表拷贝到⼀个新的位置（或计算机上）。

CMD常用指令大全

CMD常用指令大全

CMD常用指令大全accwiz.exe > 辅助工具向导acsetups.exe > acs setup dcom server executable actmovie.exe > 直接显示安装工具append.exe > 允许程序打开制定目录中的数据arp.exe > 显示和更改计算机的ip与硬件物理地址的对应列表at.exe > 计划运行任务atmadm.exe > 调用管理器统计attrib.exe > 显示和更改文件和文件夹属性autochk.exe > 检测修复文件系统autoconv.exe > 在启动过程中自动转化系统autofmt.exe > 在启动过程中格式化进程autolfn.exe > 使用长文件名格式bootok.exe > boot acceptance application for registry bootvrfy.exe > 通报启动成功cacls.exe > 显示和编辑aclcalc.exe > 计算器cdplayer.exe > cd播放器change.exe > 与终端服务器相关的查询charmap.exe > 字符映射表chglogon.exe > 启动或停用会话记录chgport.exe > 改变端口（终端服务）chgusr.exe > 改变用户（终端服务）chkdsk.exe > 磁盘检测程序chkntfs.exe > 磁盘检测程序cidaemon.exe > 组成ci文档服务cipher.exe > 在ntfs上显示或改变加密的文件或目录cisvc.exe > 索引内容ckcnv.exe > 变换cookiecleanmgr.exe > 磁盘清理cliconfg.exe > sql客户网络工具clipbrd.exe > 剪贴簿查看器clipsrv.exe > 运行clipboard服务clspack.exe > 建立系统文件列表清单cluster.exe > 显示域的集群cmd.exe > 没什么好说的！cmdl32.exe > 自动下载连接管理cmmgr32.exe > 连接管理器cmmon32.exe > 连接管理器监视cmstp.exe > 连接管理器配置文件安装程序comclust.exe > 集群comp.exe > 比较两个文件和文件集的内容＊compact.exe > 显示或改变ntfs分区上文件的压缩状态conime.exe > ime控制台control.exe > 控制面板convert.exe > 转换文件系统到ntfsconvlog.exe > 转换iis日志文件格式到ncsa格式cprofile.exe > 转换显示模式cscript.exe > 较本宿主版本csrss.exe > 客户服务器runtime进程csvde.exe > 日至格式转换程序dbgtrace.exe > 和terminal server相关dcomcnfg.exe > dcom配置属性dcphelp.exe >dcpromo.exe > ad安装向导ddeshare.exe > dde共享ddmprxy.exe >debug.exe > 就是debug啦！dfrgfat.exe > fat分区磁盘碎片整理程序dfrgntfs.exe > ntfs分区磁盘碎片整理程序dfs_cmd_.exe > 配置一个dfs树dfsinit.exe > 分布式文件系统初始化dfssvc.exe > 分布式文件系统服务器diantz.exe > 制作cab文件diskperf.exe > 磁盘性能计数器dllhost.exe > 所有com+应用软件的主进程dllhst3g.exe >dmadmin.exe > 磁盘管理服务dmremote.exe > 磁盘管理服务的一部分dns.exe > dns applications dnsdoskey.exe > 命令行创建宏dosx.exe > dos扩展dplaysvr.exe > 直接运行帮助drwatson.exe > 华生医生错误检测drwtsn32.exe > 华生医生显示和配置管理dtcsetup.exe > installs mdtcdvdplay.exe > dvd播放dxdiag.exe > direct-x诊断工具edlin.exe > 命令行的文本编辑器（历史悠久啊！）edlin.exe > 命令行的文本编辑器（历史悠久啊！）esentutl.exe > ms数据库工具eudcedit.exe > type造字程序eventvwr.exe > 事件查看器evnt_cmd_.exe > event to trap translator; configuration tool evntwin.exe > event to trap translator setupexe2bin.exe > 转换exe文件到二进制expand.exe > 解压缩extrac32.exe > 解cab工具fastopen.exe > 快速访问在内存中的硬盘文件faxcover.exe > 传真封面编辑faxqueue.exe > 显示传真队列faxsend.exe > 发送传真向导faxsvc.exe > 启动传真服务fc.exe > 比较两个文件的不同find.exe > 查找文件中的文本行findstr.exe > 查找文件中的行finger.exe > 一个用户并显示出统计结果fixmapi.exe > 修复mapi文件flattemp.exe > 允许或者禁用临时文件目录fontview.exe > 显示字体文件中的字体forcedos.exe > forces a file to start in dos mode. 强制文件在dos模式下运行freecell.exe > popular windows game 空当接龙ftp.exe > file transfer protocol used to transfer files over a network connection gdi.exe > graphic device interface 图形界面驱动grovel.exe >grpconv.exe > program manager group convertor 转换程序管理员组help.exe > displays help for windows 2000 commands 显示帮助hostname.exe > display hostname for machine. 显示机器的hostnameie4uinit.exe > ie5 user install tool ie5用户安装工具ieshwiz.exe > customize folder wizard 自定义文件夹向导iexpress.exe > create and setup packages for install 穿件安装包iisreset.exe > restart iis admin service 重启iis服务internat.exe > keyboard language indicator applet 键盘语言指示器ipconfig.exe > windows 2000 ip configuration. 察看ip配置ipsecmon.exe > ip security monitor ip安全监视器ipxroute.exe > ipx routing and source routing control program ipx路由和源路由控制程序irftp.exe > setup ftp for wireless communication 无线连接ismserv.exe > intersite messaging service 安装或者删除service control manager中的服务jdbgmgr.exe > microsoft debugger for java 4 java4的调试器jetconv.exe > convert a jet engine database 转换jet engine数据库jetpack.exe > compact jet database. 压缩jet数据库jview.exe > command-line loader for java java的命令行装载者krnl386.exe > core component for windows 2000 2000的核心组件label.exe > change label for drives 改变驱动器的卷标lcwiz.exe > license compliance wizard for local or remote systems. 许可证符合向导ldifde.exe > ldif cmd line manager ldif目录交换命令行管理licmgr.exe > terminal server license manager 终端服务许可协议管理lights.exe > display connection status lights 显示连接状况llsmgr.exe > windows 2000 license manager 2000许可协议管理llssrv.exe > start the license server 启动许可协议服务器lnkstub.exe >locator.exe > rpc locator 远程定位lodctr.exe > load perfmon counters 调用性能计数logoff.exe > log current user off. 注销用户lpq.exe > display status of a remote lpd queue 显示远端的lpd打印队列的状态,显示被送到基于unix的服务器的打印任务lpr.exe > send a print job to a network printer. 重定向打印任务到网络中的打印机。

T-4.4.2.2-O-F 机器人输入 输出RI[i] RO[i]指令.

T-4.4.2.2-O-F 机器人输入 输出RI[i] RO[i]指令.

4.4.2.2、机器人输入/输出RI[i]/RO[i]指令
机器人输入RI和机器人输出RO信号，是用户可以控制的输入输出信号。

1 R[i] =RI[i] 指令
R[i] =RI[i] 指令,将机器人的输入状态，（ON=1，OFF=0）存储到寄存器中。

例如
1 R[1]=RI[1]
2 R[R[3]]=RI[R[4]]
2 RO[i]=ON/OFF
RO[i]=ON/OFF指令，接通或断开所指定的机器人数字输出信号。

例如
3 RO[1]=ON
4 RO[R[3]]=OFF
3 RO[i]=PULSE.[时间]
RO[i]=PULSE ,(时间)指令，仅在所指定的时间内接通输出信号。

在没有指定时间的情况下，脉冲输出$DEFPULSE(单位0.1sec)所指定。

Width=脉冲宽度（0.1 to 25.5秒）
5 RO[1]=PULSE
6 RO[2]=PULSE,0.2sec
7 RO[R[3]]=PULSE，1.2sec
4 RO[i]= R[i]指令
RO[i]=R[i]指令，根据所指定的寄存器的值，接通或断开所指定的数字输出信号，若寄存器的数值为0，就断开。

若是0以外的值就接通。

例如
8 RO[1]=R[2]
9 RO[R[5]]=R[R[1]]。