下载文档原格式
CISPR14
Electromagnetic compatibility-
requirements for household appliances,electric tools and similar
apparatus
Overview
CISPR14Introduction Main Tests involved Test System
Introduction
CISPR14-1
Emission
Latest edition:5.0released2005
Applies to the conduction and radiation of radio-frequency(RF)
disturbances from appliances whose main functions are performed by motors and switching or regulatory devices,unless the RF
energy is intentionally generated or intended for illumination
Covers such equipment as household electrical appliances,
electric tools,regulating controls employing semiconductor devices, motor-driven electro-medical apparatus,electric toys,automatic
dispensing machines and cinema or slide projectors.
Frequency range covered are from9KHz to400GHz
Mains terminal continuous disturbance voltage Frequency Range 150KHz to 30MHz
Need to use LISN,Eg.ENV216
Disturbance power
Frequency Range 30MHz to 300MHz
Absorbing clamp MDS21is needed
For automatic system,Guiderail and
guiderail controller is needed
Discontinuous disturbance terminal voltage Frequency Range 150KHz to 30MHz
CL55C Click analyser is needed
Disturbance Field (30–1000MHz)
Only applicable to toys
Main Test Involved
R&S ENV 216R&S MDS21CL55C
Test System
Basic Configuration
Test Receiver
ESU40for Up to40GHz Accessories
ENV216LISN up to16A or ENV42003-phase LISN100A
Switching panel is needed TS-RSP with RSP-EMI to switch between voltage and power disturbance measurement
Click analyser if needed
Art.Hand is needed for Handheld devices
MDS21absording clamp and guiderail
HL526Antenna R&S ESU40 R&S TS-RSP
Test System
System Overview Radiated Test Setup(Up to1GHz)
Test Receiver
ESU40R11.05
R11.03W12.03W13.03Antenna HL562
W14.03
RP1AP1CP1 Switch Unit
TS-RSP
Conducted Test Setup(150kHz–30MHz/30MHz–300MHz)
Test Receiver ESU40 Switch Unit
TS-RSP
R11.04
R11.13W12.04W13.04
Conducted
Transducer RP1AP4
System Overview
