DR370-3-391中文资料

床体承重
200KG
滤线栅
栅格比
13:1
栅密度
70lp/cm
栅焦距
1500mm
高频高压发生器
功率及频率
50KW/100KHz
微机控制，带高速启动器
KV调节范围
40KV~150KV
mA调节范围
10mA~630mA
控制操作台
具有APR编辑功能
高速Ｘ射线球管
阳极热容量
300KHu
高速旋转阳极
管球焦点
0.6/1.2
球管工作状态
自动监测和过载保护
CCD探测器系统
像素
1700万像素
有效成像尺寸
430mmx430mm（17″x17″）
动态输出范围
14bit
图像分辨率
>4.6lp/mm
电离室
三野自动曝光控制技术
AEC功能
数字采集系统
操作系统
Windows 2000
计算机系统
160G高速硬盘，CD-RW刻录光驱，1G高速内存
１
a.19″高分辨率彩色液晶显示器，1200x1600
b.IDC-Magellan2图像采集/处理工作站
IDC
监视器
１
图像采集工作站
１
5
图像后处理工作站
计算机
1
a.19”彩色液晶显示器
b.Worklist功能
监视器
1
图像后处理工作站
1
IDCDR
技术参数和配置单
上海复星医疗系统有限公司
一、技术参数：
条目（Item）
参数（datSID行程
1000mm~1800mm
球管旋转角度
±90°

5201/004 5201/004 5201/004 5201/004 5201/004 5201/004 5201/004 5201/004 5201/004
包
UB UB UB UB UB LCC-3 LCC-3 LCC-3 TO-18 TO-18 TO-18
辐射水平
100拉德HDR -
100拉德ESCC 100拉德SW -
芯片中文手册,看全文,戳
3
TO-18
1 2
LCC-3
在UB销4被连接到金属盖
1 2 3
3
4 1
2
UB
图 1.内部示意图
2N3700HR
高可靠性80 V,1 NPN晶体管
特征
数据表
- 生产数据
BVCEO
80 V
集成电路（MAX）
1A
HFE在10 V - 150毫安
100
密封包
食管鳞状细胞癌和JANS合格 高达100拉德（Si）低剂量率
[300]
20
0.5 V
IC =150毫安
IB =15毫安
- 1.1 V
IC =0.1毫安 IC =10毫安 IC =150毫安 IC =150毫安 Tamb = 150 °C IC =500毫安
VCE = 10 V 25
- 200
VCE = 10 V 45
-
VCE = 10 V 100
-
300
VCE = 10 V 40
2N3700UB0x SOC3700RHRx SOC3700SW SOC3700HRB 2N3700RHRx
2N3700SW 2N3700HR
资格 系统
JANSR JANS ESCC ESCC ESCC ESCC ESCC ESCC ESCC ESCC ESCC

VI TELEFILTER Potsdamer Straße 18 D 14 513 TELTOW / Germany Measurement conditionAmbient temperature: 23 °C Input power level: 0 dBm Terminating impedances *): for input:170 Ω // -0,50 pF for output :170 Ω // -0,50 pFCharacteristicsRemark:Reference level for the relative attenuation a rel of the TFS 370 is the minimum of the pass band attenuation a min . The minimum of the pass band attenuation a min is defined as the insertion loss a e . The centre frequency f c is the arithmetic mean value of the upper and lower frequencies at the 3 dB filter attenuation level relative to the insertion loss a e . The nominal frequency f N is fixed at 370 MHz without tolerance. The given values for the relative attenuation a rel and for the group delay ripple have to be reached at the frequencies given below even if the centre frequency f c is shifted due to the temperature coefficient of frequency TC f in the operating temperature range and due to a production tolerance for the centre frequency f c .D a t a typ. value tolerance/limitInsertion loss a e = a min 2,80 dB3 dB (Reference level)Nominal frequency f N - 370 MHzCentre frequency f c 370 MHz -Pass band ripplewithin f N ± 10 MHz1,5** dB max. 2 dB**(at ambient temperature)Relative attenuation a relf N …f N ± 10 MHz1,30 dB max. 3 dB f N - 80 MHz …f N - 100 MHz60 dB min. 50 dB f N -35 MHz …f N - 55 MHz60 dB min. 30 dB f N + 25 MHz …f N + 57,5 MHz 25 dB min. 20 dB f N + 57,5 M Hz …f N + 82,5 MHz 60 dB min. 40 dB f N + 127,5 M Hz …f N + 152,5 MHz 60dbmin.57 dBIntermodulation IP3 - min. 20 dBm***Input power lewel-max. 10 dBmPermissible DC voltageV DC -max. 12 VOperating temperature range - 25 °C ... + 75 °C Storage temperature range- 40 °C … + 85 °CTemperature coefficient of frequency TC f **** -72 ppm/K -reference values only. Should there be additional questions, do not hesitate to ask for an application note or contact our design team. **) 2 dB bandwidth (f N ± 10 MHz) is guaranteed at ambient temperature (23°C). ***) intermodulation signals: f N + 1 MHz and f N + 2 MHz, each of 10 dBm ****) ∆f c (Hz) = Tc f (ppm/K) x (T - T A ) x f CTA (MHz)generated:checked / approved:VI TELEFILTER Potsdamer Straße 18 D 14 513 TELTOW / GermanyConstruction, pin configuration and 50 Ω - matching network(All dimensions in mm)date code+0.15Pin 1 outputPin 5 inputPin 2 output rf return Pin 6 input rf return Pin 3 groundPin 7 groundPin 4package groundPin 8 package ground50 Ohm Test circuit50 Ω test circuit2,3,4,6,7,8VI TELEFILTER Potsdamer Straße 18 D 14 513 TELTOW / GermanyStability CharacteristicsAfter the following tests the filter shall meet the whole specification:1. Shock: 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 272. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 63. Change of temperature: -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N4. Resistance tosolder heat (reflow): reflow possible: twice max.;for temperature conditions, please refer to the attached "Air reflow temperature conditions" on page 4;PackingTape & Reel: IEC 286 - 3, with exception of value for N and minimum bending radius; tape type II , embossed carrier tape with top cover tape on the upper side;max. pieces of filters per reel: 3000reel of empty components at start:min 300 mm reel of empty components at start including leader: min 500 mm trailermin 300 mmCOVER TAPECTTape (all dimensions in mm)W : 12 ± 0,3Po : 4 ± 0,1Do : 1,5 + 0,1 E : 1,75 ± 0,1F : 5,5 ± 0,05G (min) : 0,75P2 : 2 ± 0,05P1 : 8 ± 0,1D1(min) : 1,5Ao : 5,3 ± 0,1Bo : 5,3 ± 0,1CT : 9,5 ± 0,1Reel (all dimensions in mm): A : 330W1 : 12,4 + 2 / 0 W2 (m ax) : 18,4 N (m in) : 50C : 13 + 0,5 / -0,2The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. Markings on the filters can be read if the upper side of the carrier tape is regarded with the sprocket holes on its right.VI TELEFILTER Potsdamer Straße 18 D 14 513 TELTOW / GermanyAir reflow temperature conditions1st and 2nd air reflow profileName: pre-heating periods main-heating periods peak temperature Temperature: 150 °C - 170 °C over 200 °C 255 °C ± 5 °CTime:60 sec. - 90 sec.20 sec. - 25 sec.Tolerance of temperatures: ± 5 °C time / sec. temperature / °C time / sec. temperature / °C 0 23 140 160 10 34 150 161 20 46 160 164 30 60 170 170 40 80 180 180 50 103 190 205 60 121 195 230 70 134 200 255 80 143 205 230 90 150 210 205 100 154 215 180 110 156 220 165 120 158 230 140 130 159 240 120VI TELEFILTER Potsdamer Straße 18 D 14 513 TELTOW / GermanyHistoryVersion Reason of Changes Name D ate1.0 - generation of specification Pfeiffer 05.09.2002 1.1 - changing packagePfeiffer 09.09.2002 1.2 - change of specification of 2 dB bandwidthDr. Sabah21.10.20021.3 - change from development specification to filter specification; Dr. Sabah 29.10.2002add typical values and terminating impedance。

3
Red Built in Modbus interface, Anybus, FieldBusPlug (with adapter).
IP00 Main Circuit: Bars Hole Diameter 8.5 MMT mm² Rigid 1 x 2.5 mm² Rigid 1 x 2.5 mm² Main Circuit 25 N·m
Certificates and Declarations (Document Number)
CQC Certificate Declaration of Conformity - CCC Declaration of Conformity - CE Environmental Information Instructions and Manuals RoHS Information
2
258 mm 470 mm 279 mm
15.5 kg
208 ... 600 V AC 100 ... 250 V AC
DC Operation 24 V
Main Circuit 50/60 Hz (230 V) 110 kW (400 V) 200 kW (500 V) 257 kW 370 A
EC002572 - Motor management device 39121521
PSTX370-600-70
4
Categories
Drives → Softstarters → Softstarters → PSTX Softstarters → PSTX370 Low Voltage Products and Systems → Control Products → Softstarters → Softstarters → PSTX Softstarters → PSTX370