2015护士执业资格考试5日通关班如何确保100%通关

en 10346-2015标准EN 10346-2015标准是关于连续镀锌非合金钢带与薄板的技术要求和测试方法的国际标准。

该标准的发布旨在确保连续镀锌非合金钢带和薄板的质量和性能能够满足市场需求，并对相关的技术要求和测试方法进行了详细的规定。

EN 10346-2015标准对连续镀锌非合金钢带和薄板的规格、尺寸、外观、化学成分、机械性能、机械性能测试方法、维护性能、表面处理等方面进行了系统的规范。

并针对不同要求和特殊应用领域，对连续镀锌非合金钢带和薄板的技术要求进行了分类和细化。

该标准对连续镀锌非合金钢带和薄板的规格和尺寸进行了规定。

其中，涉及到的最大宽度、最大厚度、最小厚度以及允许的尺寸偏差等内容均得到了详细说明。

这为生产厂家和用户提供了明确的指导和依据。

EN 10346-2015标准对材料的化学成分进行了要求。

其中包括了钢种的命名、化学成分的限值要求以及对某些元素的特殊要求等。

这些要求旨在确保连续镀锌非合金钢带和薄板的化学成分稳定，并在一定范围内满足使用要求。

该标准还对连续镀锌非合金钢带和薄板的机械性能进行了规定。

对于拉伸强度、屈服强度、伸长率、硬度等机械性能参数均进行了要求。

同时，也规定了机械性能测试的方法和标准。

EN 10346-2015标准还对连续镀锌非合金钢带和薄板的维护性能进行了规范。

维护性能包括了耐候性、蓄电池电动车充电系统用件的导电性能、涂层附着力等方面。

这些要求旨在确保连续镀锌非合金钢带和薄板在特定环境和特定使用条件下的性能稳定。

EN 10346-2015标准还对连续镀锌非合金钢带和薄板的表面处理进行了规定。

主要包括涂层质量、外观、抗腐蚀性能等方面的要求。

这些要求旨在确保连续镀锌非合金钢带和薄板具有一定的表面处理性能，能够满足不同环境下的使用需求。

总之，EN 10346-2015标准是一项重要的技术标准，它规定了连续镀锌非合金钢带和薄板的技术要求和测试方法，为生产厂家和用户提供了明确的指导和依据。

欧盟REACH法规对有机硅D4和D5限用
导读
2018年1月11日，欧盟公报（Official Journal of the European Union）公布欧盟委员会（EU）2018/35号修订案，正式对（EC）No 1907/2006（即REACH法规）附录XVII 进行修订-新增第70项限制物质，规定水洗化妆品中八甲基环四硅氧烷(D4)和十甲基环五硅氧烷（D5）的含量须小于0.1%。

该法规将于法规发布后20天，即1月31日起生效。

来源：国家质检总局此次限用限于水洗化妆品，对纺织品和纺织助剂没有影响。

一、事件回顾：
▪2015年，英国向欧洲化学名管理局(European Chemicals Agency)提交“关于在常规使用条件下、能被洗去的化妆品中，限用八甲基环四硅氧烷(D4)和十甲基环五硅氧烷(D5)”的提议，原因是D4与D5排入废水中而引起的环境问题需要得到整个欧盟的关注。

随后，欧盟成员国委员会采纳了一项意见：D4和D5满足(EC) No 1907/2006附录XIII强持久性(vP)和强生物积累性(vB)物质的鉴定标准。

▪2016年3月和6月，欧洲化学名管理局下属风险评估委员会(RAC)和社会经济评估委员会(SEAC)分别采纳以下意见并提出建议，并在同年向欧盟委员会提交。

相关阅读：
环保部发布《优先控制化学品名录（第一批）》，没有D4图解| 有机硅柔软剂的发展历史及在纺织中的应用
—End —。

finigard 105 成分Finigard 105是一种多功能润滑剂，采用了先进的合成油脂技术，是一种高效的机械润滑剂和保护剂。

Finigard 105包含多种成分，其独特的配方使其具有出色的性能和广泛的应用范围。

本文将详细介绍Finigard 105的成分及其在润滑和保护方面的作用。

Finigard 105的主要成分包括合成酯、磷酸酯酰胺、抗氧化剂、极压剂和抗磨剂。

这些成分的组合使得Finigard 105具有优异的耐高温、耐低温和极压性能，同时具有抗氧化、抗腐蚀和抗磨损的能力。

合成酯是Finigard 105中的主要成分之一。

它具有优异的高温性能和低温流动性，能够在极端温度下提供出色的润滑效果。

合成酯还具有良好的溶解性，能够与多种金属和非金属表面充分接触，形成均匀的润滑膜，减少金属部件的摩擦和磨损。

磷酸酯酰胺是Finigard 105的另一个重要成分，它在高温下形成坚固的保护膜，防止金属表面氧化和腐蚀。

磷酸酯酰胺还能够减少金属表面的摩擦和磨损，提高机械设备的寿命和可靠性。

抗氧化剂是Finigard 105中的关键成分之一，它能够有效地抑制润滑剂在使用过程中的氧化反应。

氧化反应会导致润滑剂降解和变质，降低润滑效果。

抗氧化剂能够稳定润滑剂，延长其使用寿命，并保持其优异的性能。

极压剂和抗磨剂是Finigard 105中的特别成分，它们能够在高压和高负荷条件下提供优异的润滑性能。

极压剂能够防止金属表面的微触点接触，减少摩擦和磨损；抗磨剂能够填充金属表面的微小凹坑，减少摩擦系数，提高润滑效果。

这些成分的作用使得Finigard 105在较长时间内保持稳定的润滑效果，减少设备的维护和更换成本。

除了以上主要成分外，Finigard 105还包含一些辅助成分，如抗腐蚀剂和黏度稳定剂。

抗腐蚀剂能够保护金属表面不受腐蚀和氧化，延长设备的使用寿命；黏度稳定剂能够在不同温度下保持润滑剂的黏度稳定，确保其提供持久的保护和润滑效果。

ISTRUZIONI D'USO E DI INSTALLAZIONE INSTALLATION AND USER'S MANUALINSTRUCTIONS D'UTILISATION ET D'INSTALLATION INSTALLATIONS-UND GEBRAUCHSANLEITUNG INSTRUCCIONES DE USO Y DE INSTALACION INSTRUÇÕES DE USO E DE INSTALAÇÃOCENTRALINA DI COMANDO D811184A ver. 04 08-02-02I CONTROL UNIT GB UNITÉ DE COMMANDE F STEUERZENTRALE D CENTRAL DE MANDO E CENTRAL DO MANDOP ARIES - ARIES P8027908113740a“WARNINGS” leaflet and an “INSTRUCTION MANUAL”.These should both be read carefully as they provide important information about safety, installation, operation and maintenance. This product complies with the recognised technical standards and safety regulations. We declare that this product is in conformity with the following European Directives: 89/336/EEC and 73/23/EEC (and subsequent amendments).1) GENERAL OUTLINEThe ARIES control unit has been designed for swing gates. It can be used for one or two gate controllers.The control unit mod. ARIES P can also be used to perform opening of a single actuator while keeping the other one closed (pedestrian access).2) FUNCTIONSSTOP: In all cases: it stops the gate until a new start command is given.PHOT:Functions can be set with Dip-Switch.Activated during closing.Activated during opening and closing.Rapid closingON: When the position of the gate photocells is exceeded, during both opening and closing, the gate automatically starts to close even if TCA is activated. We recommend setting DIP3 to ON (photocells only activated during closing).Blocks impulsesON: During opening, START commands are not accepted.OFF: During opening, START commands are accepted.PhotocellsON: Photocells only activated during closing.OFF: Photocells activated during opening and closing.Automatic closing time (TCA)ON: Automatic closing activated (can be adjusted from 0 to 90s)Preallarm (mod. ARIES P only)ON: The flashing light turns on abt 3 seconds before the motors start.FOR THE INSTALLER: check the boxes you are interested in.START:four-step logic Gate closedGate openDuring openingDuring closingAfter stop START: two-step logic SCA: Gate open indicating lightit opens it opensit stops and activates TCAit closesit stops and does not activate TCAit starts opening it stops and activats TCA (if activated)it closesit opensit opensoffononflashingATTENTION:Dip non used in mod. ARIES (always in OFF set).3) MAINTENANCE AND DEMOLITIONThe maintenance of the system should only be carried out by qualified personnel regularly. The materials making up the set and its packing must be disposed of according to the regulations in force.Batteries must be properly disposed of.WARNINGSCorrect controller operation is only ensured when the data contained in the present manual are observed. The company is not to be held responsible for any damage resulting from failure to observe the installation standards and the instructions contained in the present manual.The descriptions and illustrations contained in the present manual are not binding. The Company reserves the right to make any alterations deemed appropriate for the technical, manufacturing and commercial improvement of the product, while leaving the essential product features unchanged, at any time and without undertaking to update the present publication.D 811184A _04Thank you for buying this product, our company is sure that you will be more than satisfied with the product ’s performance. The product is supplied with a “WARNINGS ” leaflet and an “INSTRUCTION MANUAL ”.These should both be read carefully as they provide important information about safety, installation, operation and maintenance.This product complies with the recognised technical standards and safety regulations. We declare that this product is in conformity with the following European Directives: 89/336/EEC and 73/23/EEC (and subsequent amendments).1) GENERAL OUTLINEThe ARIES control unit has been designed for swing gates. It can be used for one or two gate controllers.The control unit mod. ARIES P can also be used to perform opening of a single actuator while keeping the other one closed (pedestrian access).2) GENERAL SAFETYWARNING! An incorrect installation or improper use of the product can cause damage to persons, animals or things.•The “Warnings ” leaflet and “Instruction booklet ” supplied with this product should be read carefully as they provide important information about safety, installation, use and maintenance.•Scrap packing materials (plastic, cardboard, polystyrene etc) according to the provisions set out by current standards. Keep nylon or polystyrene bags out of children ’s reach.•Keep the instructions together with the technical brochure for future reference.•This product was exclusively designed and manufactured for the use specified in the present documentation. Any other use not specified in this documentation could damage the product and be dangerous.•The Company declines all responsibility for any consequences resulting from improper use of the product, or use which is different from that expected and specified in the present documentation.•Do not install the product in explosive atmosphere.•The Company declines all responsibility for any consequences resulting from failure to observe Good Technical Practice when constructing closing structures (door, gates etc.), as well as from any deformation which might occur during use.•The installation must comply with the provisions set out by the following European Directives: 89/336/EEC, 73/23/EEC, 98/37/ECC and subsequent amendments.•Disconnect the electrical power supply before carrying out any work on the installation. Also disconnect any buffer batteries, if fitted.•Fit an omnipolar or magnetothermal switch on the mains power supply,having a contact opening distance equal to or greater than 3mm.•Check that a differential switch with a 0.03A threshold is fitted just before the power supply mains.•Check that earthing is carried out correctly: connect all metal parts for closure (doors, gates etc.) and all system components provided with an earth terminal.•The Company declines all responsibility with respect to the automation safety and correct operation when other manufacturers ’ components are used.•Only use original parts for any maintenance or repair operation.•Do not modify the automation components, unless explicitly authorised by the company.•Instruct the product user about the control systems provided and the manual opening operation in case of emergency.•Do not allow persons or children to remain in the automation operation area.•Keep radio control or other control devices out of children ’s reach, in order to avoid unintentional automation activation.•The user must avoid any attempt to carry out work or repair on the automation system, and always request the assistance of qualified personnel.•Anything which is not expressly provided for in the present instructions,is not allowed.3) TECHNICAL SPECIFICATIONSPower supply:...............................................................230V ±10% 50Hz Absorption on empty:.................................................................0.5A max Output power for accessories:..........................................24V~ 6VA max Max relay current:................................................................................8A Max power of motors:...............................................................300 W x 2Torque limiter:.................................................Self-transformer with 4 pos Limit switch:................................................................Adjustable run timePanel dimensions:.........................................................................See fig.1Cabinet protection:............................................................................IP55Working temperature:...............................................................-20 +55°C 4) TERMINAL BOARD CONNECTIONS(Fig.2)CAUTION: Keep the low voltage connections completely separated from the power supply connections.Fig.3 shows the fixing and connection method of the drive condensers whenever they are not fitted to the motor.JP51-2 Single-phase power supply 230V ±10%, 50 Hz (1=L/2=N).For connection to the mains use a multiple-pole cable with a minimum cross section of 3x1.5mm 2 of the type indicated in the above-mentioned standard (by way of example, if the cable is not shielded it must be at least equivalent to H07 RN-F while, if shielded, it must be at least equivalent to H05 VV-F with a cross section of 3x1.5mm 2).JP33-4 (mod.ARIES-P) 230V 40W max. blinker connection.5-6 (mod.ARIES) 230V 40W max. blinker connection.7-8-9 Motor M1 connection - 8 common, 7-9 start.10-11-12 Motor M2(r) connection - 11 common, 10-12 start.JP413-14 Open-close button and key switch (N.O.).13-15 Stop button (N.C.). If unused, leave bridged.13-16 Photocell or pneumatic edge input (N.C.). If unused, leave bridged.17-18 24V 3W max. gate open warning light.18-19 24V~ 0.25A max. (6VA) output (for supplying photocell or other device).20-21 Antenna input for radio-receiver board (20 signal - 21 braid).22 Common terminal (equivalent to terminal 13).23 Terminal for pedestrian control. It moves the leaf of motor M2 connected to terminal 10-11-12. This terminal is available only in ARIES-P control unit.JP225-26 2nd radio channel output of the double-channel receiver board (terminals not fitted on ARIES but fitted on ARIES-P) contact N.O.JP1 Radio-receiver board connector 1-2 channels.5) FUNCTIONSDL1:Power-on LedIt is switched on when the board is electrically powered.START: four-step logic: (DIP5 OFF)gate closed:..................................................................................it opens during opening:............................................... it stops and activates TCA gate open:................................................................................... it closes during closing:.................................... it stops and does not activate TCA after stop:.........................................................................it starts opening START: two-step logic: (DIP5 ON)gate closed:..................................................................................it opens during opening:................................it stops and activats TCA (if activated)gate open:....................................................................................it closes during closing:..............................................................................it opens after stop:.....................................................................................it opens STOP: In all cases: it stops the gate until a new start command is given.PHOT:Functions can be set with DIP-SWITCH.Activated during closing if DIP3-ON.Activated during opening and closing if DIP3-OFF.SCA: Gate open indicating light.with gate closed:...................................................................................off when gate is opening:...........................................................................on with gate open:.......................................................................................on when gate is closing:.....................................................................flashing 6) DIP-SWITCH SELECTION DIP1 Rapid closingON: When the position of the gate photocells is exceeded, during both opening and closing, the gate automatically starts to close even if TCA is activated. We recommend setting DIP3 to ON (photocells only activated during closing).OFF: Function not activated.DIP2 Blocks impulsesON: During opening, START commands are not accepted.OFF: During opening, START commands are accepted.DIP3 PhotocellsON: Photocells only activated during closing.OFF: Photocells activated during opening and closing.D 811184A _04DIP4 Automatic closing time (TCA)ON: Automatic closing activated (can be adjusted from 0 to 90s).OFF: Automatic closing not activated.DIP5 Control logicON: 2-step logic is activated (see start paragraph).OFF: 4-step logic is activated (see start paragraph).DIP6: Preallarm (mod.ARIES P only)ON: The flashing light turns on abt 3 seconds before the motors start.OFF The flashing light turns on simultaneously with the start of the motors.ATTENTION:Dip non used in mod. ARIES (always in OFF set).7) TRIMMER ADJUSTMENTTCA This adjusts the automatic closing time, after which time the gate automatically closes (can be adjusted from 0 to 90s).TW This adjusts the motor working time, after which time the motor stops (can be adjusted from 0 to 40s).TDELAY This adjusts the closing delay time of the second motor (M2).8) MOTOR TORQUE ADJUSTMENTThe ARIES control unit has electric torque adjustment which allows the motor force to be adjusted.The adjustment should be set for the minimum force required to carry out the opening and closing strokes completely.Adjustment is carried out by moving the connection 55 (fig.3) on the tran-sformer sockets as described below:Pos.T1 1st TORQUE (MINIMUM TORQUE)Pos.T2 2nd TORQUE Pos.T3 3rd TORQUEPos.T4 4th TORQUE (MAXIMUM TORQUE)4 motor torque values can be obtained.To gain access to the torque adjustment sockets, disconnect the mains supply and remove the protective case “P ” of the transfomer.CAUTION: Excessive torque adjustment may jeopardise the anti-squash safety function. On the other hand insufficient torque adjustment may not guarantee correct opening or closing strokes.9) MAINTENANCE AND DEMOLITIONThe maintenance of the system should only be carried out by qualified personnel regularly. The materials making up the set and its packing must be disposed of according to the regulations in force.Batteries must be properly disposed of.WARNINGSCorrect controller operation is only ensured when the data contained in the present manual are observed. The company is not to be held responsible for any damage resulting from failure to observe the installation standards and the instructions contained in the present manual.The descriptions and illustrations contained in the present manual are not binding. The Company reserves the right to make any alterations deemed appropriate for the technical, manufacturing and commercial improvement of the product, while leaving the essential product features unchanged, at any time and without undertaking to update the present publication.D811184A_04ARIES/ARIES-P - Ver. 04 -23。

USA SAFETY DATA SHEET3000000034161. CHEMICAL PRODUCT AND COMPANY IDENTIFICATIONProduct name: LORD E-105 BLACK Product Use/Class:Epoxy ResinLORD Corporation 111 LORD DriveCary, NC 27511-7923 USATelephone: 814 868-3180Non-Transportation Emergency: 814 763-2345 Chemtrec 24 Hr Transportation Emergency No.800 424-9300 (Outside Continental U.S. 703 527-3887)EFFECTIVE DATE: 11/18/20202. HAZARDS IDENTIFICATIONGHS CLASSIFICATION:Flammable liquids Category 4Acute toxicity Inhalation - Dust and Mist Category 4 - 86.4% of the mixture consists of ingredient(s) of unknown toxicity.Acute toxicity Inhalation - Vapours Category 4 - 86.4% of the mixture consists of ingredient(s) of unknown toxicity. Skin corrosion/irritation Category 2Serious eye damage/eye irritation Category 2A Skin sensitization Category 1Germ cell mutagenicity Category 2 Carcinogenicity Category 2Reproductive toxicity Category 2Specific target organ systemic toxicity (repeated exposure) Category 2 TestesSpecific target organ systemic toxicity (repeated exposure) Category 1 Respiratory system Hazardous to the aquatic environment - acute hazard Category 2 Hazardous to the aquatic environment - chronic hazardCategory 2GHS LABEL ELEMENTS: Symbol(s)Signal WordD ANGERHazard StatementsCombustible liquid. Harmful if inhaled. Causes skin irritation.Causes serious eye irritation.May cause an allergic skin reaction. Suspected of causing genetic defects. Suspected of causing cancer.Suspected of damaging fertility or the unborn child.May cause damage to organs through prolonged or repeated exposure.(Testes)Causes damage to organs through prolonged or repeated exposure.(Respiratory system) Toxic to aquatic life.Toxic to aquatic life with long lasting effects.Precautionary StatementsPreventionKeep away from heat/sparks/open flames/hot surfaces. - No smoking.Obtain special instructions before use.Do not handle until all safety precautions have been read and understood.Wear protective gloves/protective clothing/eye protection/face protection.Use personal protective equipment as required.Do not breathe dust/fume/gas/mist/vapors/spray.Wash thoroughly after handling.Do not eat, drink or smoke when using this product.Use only outdoors or in a well-ventilated area.Contaminated work clothing should not be allowed out of the workplace.Avoid release to the environment.ResponseIn case of fire: refer to section 5 of SDS for extinguishing media.Call a POISON CENTER or doctor/physician if you feel unwell.Specific treatment (see supplemental first aid instructions on this label).IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing.IF ON SKIN: Wash with plenty of soap and water.If skin irritation or rash occurs: Get medical advice/attention.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.Continue rinsing.Take off contaminated clothing and wash before reuse.Collect spillage.StorageStore in a well-ventilated place. Keep cool.Store locked up.Disposal:Dispose of contents/container in accordance with waste/disposal laws and regulations of your country or particular locality.Other Hazards:This product contains component(s) which have the following warnings; however based on the GHS classification criteria of your country or locale, the product mixture may be outside the respective category(s).Acute: Vapor harmful; may affect the brain or nervous system causing dizziness, headache or nausea. Possibleirritation of the respiratory system can occur causing a variety of symptoms such as dryness of the throat, tightness of the chest, and shortness of breath. May cause central nervous system depression characterized by the followingprogressive steps: headache, dizziness, staggering gait, confusion, unconsciousness or coma. Significantoverexposure to n-butyl glycidyl ether by the inhalation route is unlikely under most ambient conditions due to its low volatility. However, vapors, aerosols, and mists may be formed during some applications such as heating orapplications of uncured material on large surface areas. Harmful if absorbed through skin. May be harmful ifswallowed. Ingestion is not an expected route of entry in industrial or commercial uses.Chronic: IARC has designated carbon black as Group 2B - inadequate evidence for carcinogenicity in humans, but sufficient evidence in experimental animals. In 2006 IARC reaffirmed its 1995 finding that there is "inadequateevidence" from human health studies to assess whether carbon black causes cancer in humans. Further,epidemiological evidence from well-conducted investigations has shown no causative link between carbon black exposure and the risk of malignant or non-malignant respiratory disease in humans.3. COMPOSITION/INFORMATION ON INGREDIENTSChemical Name CAS Number RangeEpoxy resin PROPRIETARY - 90%N-Butyl glycidyl ether2426-08-6 - 15%Carbon black1333-86-4 - 1%Any "PROPRIETARY" component(s) in the above table is considered trade secret, thus the specific chemical and its exact concentration is being withheld.4. FIRST AID MEASURESFIRST AID - EYE CONTACT: Flush eyes immediately with large amount of water for at least 15 minutes holding eyelids open while flushing. Get prompt medical attention.FIRST AID - SKIN CONTACT: Flush contaminated skin with large amounts of water while removing contaminated clothing. Wash affected skin areas with soap and water. Get medical attention if symptoms occur.FIRST AID - INHALATION: Move person to fresh air. Restore and support continued breathing. If breathing is difficult, give oxygen. Get immediate medical attention.FIRST AID - INGESTION: If swallowed, do not induce vomiting. Call a physician or poison control center immediately for further instructions. Never give anything by mouth if victim is rapidly losing consciousness, unconscious or convulsing.5. FIRE-FIGHTING MEASURESSUITABLE EXTINGUISHING MEDIA: Carbon Dioxide, Dry Chemical, Foam, Water FogUNSUITABLE EXTINGUISHING MEDIA: Not determined for this product.SPECIFIC HAZARDS POSSIBLY ARISING FROM THE CHEMICAL: Combustible liquid and vapor. During a fire, irritating and/or toxic gases and particulate may be generated by thermal decomposition or combustion. Keep containers tightly closed. Isolate from heat, electrical equipment, sparks, open flame, and other sources of ignition. Closed containers may rupture when exposed to extreme heat. Use water spray to keep fire exposed containers cool.SPECIAL PROTECTIVE EQUIPMENT AND PRECAUTIONS FOR FIRE-FIGHTERS: Wear full firefighting protective clothing, including self-contained breathing apparatus (SCBA). Water spray may be ineffective. If water is used, fog nozzles are preferable.6. ACCIDENTAL RELEASE MEASURESPERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES: Remove all sources of ignition (flame, hot surfaces, and electrical, static or frictional sparks). Avoid contact. Avoid breathing vapors. Use self-contained breathing equipment.ENVIRONMENTAL PRECAUTIONS: Do not contaminate bodies of water, waterways, or ditches, with chemical or used container.METHODS AND MATERIALS FOR CONTAINMENT AND CLEANUP: Keep non-essential personnel a safe distance away from the spill area. Notify appropriate authorities if necessary. Avoid contact. Contain and remove with inert absorbent material and non-sparking tools. Before attempting cleanup, refer to hazard caution information in other sections of the SDS form.7. HANDLING AND STORAGEHANDLING: Keep closure tight and container upright to prevent leakage. Avoid skin and eye contact. Wash thoroughly after handling. Avoid breathing of vapor or spray mists. Do not handle until all safety precautions have been read and understood. Empty containers should not be re-used. Use with adequate ventilation. Because empty containers may retain product residue and flammable vapors, keep away from heat, sparks and flame; do not cut, puncture or weld on or near the empty container. Do not smoke where this product is used or stored.STORAGE: Do not store or use near heat, sparks, or open flame. Store only in well-ventilated areas. Do not puncture, drag, or slide container. Keep container closed when not in use. Refer to OSHA 29CFR Part 1910.106 "Flammable and Combustible Liquids" for specific storage requirements.INCOMPATIBILITY: Strong acids, bases, and strong oxidizers.8. EXPOSURE CONTROLS/PERSONAL PROTECTIONCOMPONENT EXPOSURE LIMITChemical Name ACGIH TLV-TWA ACGIH TLV-STELOSHA PEL-TWAOSHA PEL-CEILINGSkinEpoxy resin N.E.N.E.N.E. N.E.N.A.N-Butyl glycidyl ether 3 ppm N.E.270 mg/m350 ppmN.E.SCarbon black 3 mg/m3N.E. 3.5 mg/m3 N.E.N.A.N.A. - Not Applicable, N.E. - Not Established, S - Skin DesignationEngineering controls: Sufficient ventilation in pattern and volume should be provided in order to maintain air contaminant levels below recommended exposure limits. Caution: Solvent vapors are heavier than air and collect in lower levels of the work area.PERSONAL PROTECTION MEASURES/EQUIPMENT:RESPIRATORY PROTECTION: Use a NIOSH approved chemical/mechanical filter respirator designed toremove a combination of particulates and organic vapor if occupational limits are exceeded. For emergencysituations, confined space use, or other conditions where exposure limits may be greatly exceeded, use an approved air-supplied respirator. For respirator use observe OSHA regulations (29CFR 1910.134) or use in accordance with applicable laws and regulations of your country or particular locality.SKIN PROTECTION: Use neoprene, nitrile, or rubber gloves to prevent skin contact.EYE PROTECTION: Use safety eyewear including safety glasses with side shields and chemical goggles where splashing may occur.OTHER PROTECTIVE EQUIPMENT: Use disposable or impervious clothing if work clothing contamination is likely. Remove and wash contaminated clothing before reuse.HYGIENIC PRACTICES: Wash hands before eating, smoking, or using toilet facility. Do not smoke in anychemical handling or storage area. Food or beverages should not be consumed anywhere this product is handled or stored. Wash thoroughly after handling.9. PHYSICAL AND CHEMICAL PROPERTIESTypical values, not to be used for specification purposes.ODOR: Odorless VAPOR PRESSURE: N.D.APPEARANCE: Black VAPOR DENSITY: Heavier than Air PHYSICAL STATE: Liquid LOWER EXPLOSIVE LIMIT: Not ApplicableFLASH POINT: 165 °F, 73 °CSetaflash Closed CupUPPER EXPLOSIVE LIMIT: Not Applicable BOILING RANGE: 169 °C EVAPORATION RATE: Not Applicable AUTOIGNITION TEMPERATURE:N.D.DENSITY: 1.12 g/cm3 (9.32 lb/gal) DECOMPOSITION TEMPERATURE:N.D. VISCOSITY, DYNAMIC: N.D.ODOR THRESHOLD: N.D.VISCOSITY, KINEMATIC: N.D.SOLUBILITY IN H2O: Insoluble VOLATILE BY WEIGHT: 0.00 %pH: N.A.VOLATILE BY VOLUME: 0.00 %FREEZE POINT: N.D. VOC CALCULATED: 0 lb/gal, 0 g/l COEFFICIENT OF WATER/OILDISTRIBUTION:N.D.LEGEND: N.A. - Not Applicable, N.E. - Not Established, N.D. - Not Determined10. STABILITY AND REACTIVITYHAZARDOUS POLYMERIZATION: Hazardous polymerization will not occur under normal conditions.STABILITY: Product is stable under normal storage conditions.CONDITIONS TO AVOID: High temperatures. Sources of ignition.INCOMPATIBILITY: Strong acids, bases, and strong oxidizers.HAZARDOUS DECOMPOSITION PRODUCTS: Carbon monoxide, carbon dioxide11. TOXICOLOGICAL INFORMATIONEXPOSURE PATH: Refer to section 2 of this SDS.SYMPTOMS:Refer to section 2 of this SDS.TOXICITY MEASURES:Chemical Name LD50/LC50Epoxy resin Oral LD50: Rat11,400 mg/kgN-Butyl glycidyl ether Oral LD50: Rat2,050 mg/kgDermal LD50: Rat> 2,150 mg/kgInhalation LC50: Rat2590 ppm/4 hCarbon black Oral LD50: Rat> 15,400 mg/kgDermal LD50: Rabbit> 3 g/kgGHS LC50 (vapour): Acute toxicity point estimate55 mg/l Germ cell mutagenicity: Category 2 - Suspected of causing genetic defects.Components contributing to classification: N-Butyl glycidyl ether.Carcinogenicity: Category 2 - Suspected of causing cancer.Components contributing to classification: N-Butyl glycidyl ether.Reproductive toxicity: Category 2 - Suspected of damaging fertility or the unborn child.Components contributing to classification: N-Butyl glycidyl ether.12. ECOLOGICAL INFORMATIONECOTOXICITY:Chemical Name EcotoxicityEpoxy resin Invertebrates: Daphnia magna1.7 mg/l48 hN-Butyl glycidyl ether N.D.Carbon black N.D.PERSISTENCE AND DEGRADABILITY:Not determined for this product.BIOACCUMULATIVE: Not determined for this product.MOBILITY IN SOIL: Not determined for this product.OTHER ADVERSE EFFECTS: Not determined for this product.13. DISPOSAL CONSIDERATIONSDISPOSAL METHOD: Disposal should be done in accordance with Federal (40CFR Part 261), state and local environmental control regulations. If waste is determined to be hazardous, use licensed hazardous waste transporter and disposal facility.14. TRANSPORT INFORMATIONUS DOT RoadProper Shipping Name: Environmentally hazardous substances, liquid, n.o.s.Hazard Class: 9SECONDARY HAZARD: NoneUN/NA Number: 3082Packing Group: IIIEmergency Response Guide Number: 171For US DOT non-bulk road shipments this material may be classified as NOT REGULATED. For the mostaccurate shipping information, refer to your transportation/compliance department regarding changes inpackage size, mode of shipment or other regulatory descriptors.IATA CargoPROPER SHIPPING NAME: Environmentally hazardous substance, liquid, n.o.s.Hazard Class: 9HAZARD CLASS: NoneUN NUMBER: 3082PACKING GROUP: IIIEMS: 9LIMDGPROPER SHIPPING NAME: Environmentally hazardous substance, liquid, n.o.s.Hazard Class: 9HAZARD CLASS: NoneUN NUMBER: 3082PACKING GROUP: IIIEMS: F-AThe listed transportation classification applies to non-bulk shipments. It does not address regulatory variations due to changes in package size, mode of shipment or other regulatory descriptors. For the most accurate shipping information, refer to your transportation/compliance department.15. REGULATORY INFORMATIONU.S. FEDERAL REGULATIONS: AS FOLLOWS:SARA SECTION 313This product contains the following substances subject to the reporting requirements of Section 313 of Title III of the Superfund Amendment and Reauthorization Act of 1986 and 40 CFR part 372.:NoneTOXIC SUBSTANCES CONTROL ACT:INVENTORY STATUSThe chemical substances in this product are on the TSCA Section 8 Inventory.EXPORT NOTIFICATIONThis product contains the following chemical substances subject to the reporting requirements of TSCA 12(B) if exported from the United States:None16. OTHER INFORMATIONUnder HazCom 2012 it is optional to continue using the HMIS rating system. It is important to ensure employees have been trained to recognize the different numeric ratings associated with the HazCom 2012 and HMIS schemes.HMIS RATINGS - HEALTH: 2 FLAMMABILITY: 2 PHYSICAL HAZARD: 1* - Indicates a chronic hazard; see Section 2Revision: Section 2, Section 11, Section 12Effective Date: 11/18/2020DISCLAIMERThe information contained herein is, to the best of our knowledge and belief, accurate. However, since the conditions of handling and use are beyond our control, we make no guarantee of results, and assume no liability for damages incurred byuse of this material. It is the responsibility of the user to comply with all applicable federal, state and local laws and regulations.。

Issue DateINSTALLATION INSTRUCTIONSPublication No.Honda Dealer: Please give a copy of these instructions to your customer.© 2015 American Honda Motor Co., Inc - All Rights Reserved.0SR72-HL4-A00Application AccessoryPARTS LIST(2)(6)(10)(7)No.Description Qty (1)Windscreen1(2)Cam lock/hinge assembly 3(3)Flange collar 5(4) 6 x 20 mm screw 1(5) 6 x 30 mm screw 3(6)Left gasket 1(7)Right gasket 1(8)Push dart 4(9)Push nut 4(10)Support bracket 1(11)Washer 1(12)Trim clip 2(13)Spacer1(14)Installation Instruction URL (not shown)1TOOLS AND SUPPLIES REQUIRED4 mm hex wrench Torque wrench Power drill5/16 inch (8 mm) drill bitTORQUE CHARTSTighten all screws, bolts, and nuts to their specified torque values. Refer to the Service Manual for the torque values of the removed parts.ItemN·m kgf·m lbf·ft 6 mm screw and nut50.54FULL POLY WINDSCREEN(HARD COAT)P/N 0SR72-HL4-A00SXS1000M3/M3P/M5D/M5PMII 15262September 2015USE AND CARE INFORMATION• Check the accessory mount frequently and retighten if necessary.• Replace this accessory with a new one if it is damaged or discolored excessively.• When this accessory becomes dirty, rinse it thoroughly with cool water to remove loose dirt, then wipe with a clean cloth or sponge.• Do not use a brush to clean this accessory as it may scratch the surface.• Never use, or expose the windscreen to petroleum solvents such as gasoline, thinner, benzine, acid, or alkaline cleaners.INSTALLATION NOTE:• If installing a complete cab, install this accessory before installing the roof and door kits.• Remove and discard the rubber shipping band from the cam lock before installation of this accessory.SHIPPING BAND (DISCARD)© 2015 American Honda Motor Co., Inc - All Rights Reserved.0SR72-HL4-A001. Install a cam lock/hinge assembly into each of thethree top slots using one 6 x 30 mm screw and one flange collar, noting the orientation of the cam lock/hinge assembly.CAM LOCK/HINGE ASSY.6 x 30 mm SCREWFLANGE COLLAR HAR2. Place the windscreen onto the vehicle and seat itsbottom onto the instrument panel as shown.3. Install the support bracket to the inside of thewindscreen using one 6 x 20 mm screw, washer and spacer as shown.WASHER SPACER 6 x 20 mm SCREW SUPPORT BRACKETW S4. Using the windscreen support bracket as a template,make a mark on the instrument panel top edge through each hole in the bracket.5. Remove the windscreen and drill holes through themarked points on the instrument panel with a 5/16 inch (8 mm) drill bit.6A. Place the Left and Right gaskets over the bottomcorners of the windscreen, lining up the holes in the gasket and the windscreen.6B. (HARD CAB ONLY): If installing the windscreenas part of a hard cab system, carefully cut out the indented area of each gasket before installing to thewindscreen.7. Install the gaskets to the windscreen using two pushdarts and push nuts per side, as shown.PUSH DARTGASKET(LEFT SHOWN)8. Reinstall the windscreen and secure it to theinstrument panel by placing trim clips through the windscreen bracket and into the holes drilled in Step 5.TRIM CLIP© 2015 American Honda Motor Co., Inc - All Rights Reserved.0SR72-HL4-A009. Align all five cam locks around the cab frame barsand snap the arms closed.Install the top three cam locks along the top frame bar first.Installalong theCAM LOCK CAM LOCK LOCKCAM *To ensure proper fitment, fasten clamps once thegap between the edge of the windscreen and the A-pillars is even along the entire length of the frame.*Approximate angle of the upper clamp bracketsshown:10. Adjust cam lock tension by rotating the threaded armclockwise to tighten, counter-clockwise to loosen.THREADED ARM。

Product informationISOFLEX NBU 15,Prod. 004026,enEdition 16.07.2016 [replaces edition 26.12.2015]Benefits for your application–Tried and tested over many years especially in high-speed applications–Longer component life due to optimized wear protection and good pressure absorption capacity–Excellent resistance to water and media as well as above-average anticorrosive additives protect bearings against premature failure, thus helping to minimize repair costs–Low intrinsic bearing heat due to low lubricant friction enabling longer service life–Uninterrupted machine operation due to good pumpability and metering in customary centralized lubricating systemsDescriptionISOFLEX NBU 15 is a high-speed grease with a good pressure absorption capacity.It consists of a combination of ester oil, synthetic hydrocarbon oil and mineral oil and a barium complex soap. It offers good protection against wear and corrosion and is resistant to water,media and oxidation.ApplicationISOFLEX NBU 15 is primarily used for spindle bearings and high-speed plain bearings, e.g. in machine tools and textile machines. Further applications are in threaded spindles, ball screws operating under high loads, running gear bearings, as a long-term grease in cableway bearings and in precision engineering. It may also be used for the lubrication of tooth flanks in precision gears (e.g. bevel gears in milling machines,electromechanical valve actuators).Application notesThe lubricant is applied by brush, spatula, grease gun or grease cartridge. Owing to the many elastomer and plastic compositions, we recommend checking the grease'scompatibility prior to series application with elastomers or plastics.Material safety data sheetsMaterial safety data sheets can be requested via our website . You may also obtain them through your contact person at Klüber Lubrication.Product information。

1007和1015都是美国电子线标准1，耐压不同：1007为300V，1015为600V；所以绝缘厚度不同，1015要厚很多。

2，耐温不同：1007为80℃，1015为105℃UL1007电子线正规线材导体规格：UL 1007 电子线为电器设备内部连线，目前，在生产UL1007 电子线领域，通用标称是以AWG（American Wire Gauge）为单位，常用正规线材的线径规格见下表：型号线规线数/线径外径绝缘厚度导线外径1007 30 7/0.1 0.3 0.41 1.121007 28 7/0.127 0.38 0.41 1.201007 26 7/0.16 0.48 0.41 1.301007 24 11/0.16 0.61 0.41 1.431007 22 17/0.16 0.76 0.41 1.581007 20 26/0.16 0.94 0.41 1.761007 18 41/0.16 1.18 0.41 2.001007 16 26/0.254 1.49 0.41 2.32UL 1007 电子线构成：包含绝缘层，导体两部分，外被为PVC绝缘层，PVC中文全名为聚氯乙烯；内部导体按正常标准应分裸铜和镀锡铜两种。

产品要求：额定温度：80°C，额定电压：300V，必须通过UL VW-1 及CSA Ft1垂直耐燃测试，绝缘厚度均匀。

产品依据：产品依据UL758标准生产、测试（包含耐温、耐压、老化等测试）。

UL1015电子线正规线材导体规格：通用标称是以AWG（American Wire Gauge）为单位UL 1015 电子线构成：包含绝缘层，导体两部分，外皮为PVC绝缘层，PVC中文全名为聚氯乙烯；内部导体按正常标准应分裸铜和镀锡铜两种。

产品要求：额定温度：105°C，额定电压：600V，必须通过UL VW-1 及CSA Ft1垂直耐燃测试，绝缘厚度均匀。

附件 12015年度第八批达国Ⅴ排放标准的轻型汽油车代表随机变动实号，“（*）”代表随机变动实号或虚号) (下文出现的“*”1、柳州五菱汽车工业有限公司LQG5021XDWJY 流动服务车发动机：L2B (上汽通用五菱汽车股份有限公司)机外净化器：BCSC-G025 (巴斯夫催化剂(上海)有限公司)燃油蒸发控制装置：CNS0001 (柳州舜泽尔汽车零部件有限公司)氧传感器：前:OSP-b (北京德尔福万源发动机管理系统有限公司)后:OSP-b (北京德尔福万源发动机管理系统有限公司)LQG5029XLCBCY1 冷藏车发动机：LD6 (上汽通用五菱汽车股份有限公司)机外净化器：CONV-A5-02 (巴斯夫催化剂(上海)有限公司)燃油蒸发控制装置：GL (柳州舜泽尔汽车零部件有限公司、天津市格林利福新技术有限公司)氧传感器：前:LSF4.2 (联合汽车电子有限公司)后:LSF4.2 (联合汽车电子有限公司)2、烟台海德专用汽车有限公司CHD5023TSLDE5 扫路车CHD5029ZLJE5 自卸式垃圾车CHD5027ZLJE5 自卸式垃圾车CHD5021ZLJE5 自卸式垃圾车CHD5027ZXXE5 车厢可卸式垃圾车CHD5028ZLJE5 自卸式垃圾车发动机：JL466Q1 (重庆长安汽车股份有限公司)机外净化器：CZ60ZS5G-2 (重庆长安汽车股份有限公司)燃油蒸发控制装置：FY (重庆方园工贸有限公司)氧传感器：前:LSF4 (联合汽车电子有限公司)后:LSF4 (联合汽车电子有限公司)3、北京汽车股份有限公司BJ7200C8GB 轿车发动机：B205RGA (北京汽车动力总成有限公司)机外净化器：前:A00009999 (巴斯夫催化剂（上海）有限公司)后:A00010001 (巴斯夫催化剂（上海）有限公司)燃油蒸发控制装置：A00001061 (北京新峰天霁科技有限公司)氧传感器：前:RE94 (DELPHI)后:RE94 (DELPHI)4、迈凯伦汽车有限公司MCLAREN 625C COUPE (80AAF100) 乘用车MCLAREN 625C COUPE (80AAF200) 乘用车发动机：38JBAA (McLaren Automotive Limited)机外净化器：右前:11H0377CP (Johnson Matthey)右后:11H0378CP (Johnson Matthey)左前:11H0377CP (Johnson Matthey)左后:11H0378CP (Johnson Matthey) 燃油蒸发控制装置：11K0057CP (Dytech)氧传感器：前:LSU ADV 4.9 (BOSCH)后:LSF 4.2 (BOSCH)MCLAREN 625C SPIDER (80CCF100) 乘用车MCLAREN 625C SPIDER (80CCF200) 乘用车发动机：38JBAA (McLaren Automotive Limited)机外净化器：右前:11H0377CP (Johnson Matthey)右后:11H0378CP (Johnson Matthey)左前:11H0377CP (Johnson Matthey)左后:11H0378CP (Johnson Matthey) 燃油蒸发控制装置：11K0057CP (Dytech)氧传感器：前:LSU ADV 4.9 (BOSCH)后:LSF 4.2 (BOSCH)MCLAREN 650S COUPE (80AAG100) 乘用车MCLAREN 650S COUPE (80AAG200) 乘用车发动机：38JBAA (McLaren Automotive Limited)机外净化器：右前:11H0377CP (Johnson Matthey)右后:11H0378CP (Johnson Matthey)左前:11H0377CP (Johnson Matthey)左后:11H0378CP (Johnson Matthey) 燃油蒸发控制装置：11K0057CP (Dytech)氧传感器：前:LSU ADV 4.9 (BOSCH)后:LSF 4.2 (BOSCH)MCLAREN 650S SPIDER (80CCG100) 乘用车MCLAREN 650S SPIDER (80CCG200) 乘用车发动机：38JBAA (McLaren Automotive Limited)机外净化器：右前:11H0377CP (Johnson Matthey)右后:11H0378CP (Johnson Matthey)左前:11H0377CP (Johnson Matthey)左后:11H0378CP (Johnson Matthey) 燃油蒸发控制装置：11K0057CP (Dytech)氧传感器：前:LSU ADV 4.9 (BOSCH)后: LSF 4.2 (BOSCH)MP4-12C COUPE (70AAA100) 乘用车MP4-12C COUPE (70AAA200) 乘用车发动机：38JBAA (McLaren Automotive Limited)机外净化器：右前:11H0377CP (Johnson Matthey)右后:11H0378CP (Johnson Matthey)左前:11H0377CP (Johnson Matthey)左后:11H0378CP (Johnson Matthey) 燃油蒸发控制装置：11K0057CP (Dytech)氧传感器：前:LSU ADV 4.9 (BOSCH)后:LSF 4.2 (BOSCH)MP4-12C SPIDER (70CCC100) 乘用车MP4-12C SPIDER (70CCC200) 乘用车发动机：38JBAA (McLaren Automotive Limited)机外净化器：右前:11H0377CP (Johnson Matthey)右后:11H0378CP (Johnson Matthey)左前:11H0377CP (Johnson Matthey)左后:11H0378CP (Johnson Matthey) 燃油蒸发控制装置：11K0057CP (Dytech)氧传感器：前:LSU ADV 4.9 (BOSCH)后:LSF 4.2 (BOSCH)P1 乘用车发动机：38JBAB (McLaren Automotive Limited)机外净化器：右:12H0119CP (Johnson Matthey)左:12H0118CP (Johnson Matthey)燃油蒸发控制装置：12K0197CP (Dytech)氧传感器：前:LSU ADV 4.9 (BOSCH)后:LSF 4.2 (BOSCH)5、捷豹路虎有限公司(Jaguar Land Rover Limited) RANGE ROVER (SJTC) 越野乘用车RANGE ROVER (UJTC) 越野乘用车RANGE ROVER (TJTC) 越野乘用车RANGE ROVER (RJTC) 越野乘用车发动机：306PS (Ford Motor Company)机外净化器：右:KAT128 (Eberspaecher)左:KAT128 (Eberspaecher)燃油蒸发控制装置：CAN011 (Delphi)氧传感器：中:CPLA-9G444-** (BOSCH)前:CPLA-9F472-C* (BOSCH)或发动机：306PS (Ford Motor Company)机外净化器：右:KAT128 (Eberspaecher)左:KAT128 (Eberspaecher)燃油蒸发控制装置：CAN011 (Delphi)氧传感器：中:CPLA-9G444-** (BOSCH)前:CPLA-9F472-C* (BOSCH)后:CPLA-9G444-H* (BOSCH)RANGE ROVER SPORT (XJTC) 越野乘用车RANGE ROVER SPOR （YJTC）越野乘用车发动机：306PS (Ford Motor Company)机外净化器：右:KAT128 (Eberspaecher)左:KAT128 (Eberspaecher)燃油蒸发控制装置：CAN011 (Delphi)氧传感器：中:CPLA-9G444-** (BOSCH)前:CPLA-9F472-C* (BOSCH)或发动机：306PS (Ford Motor Company)机外净化器：右:KAT128 (Eberspaecher)左:KAT128 (Eberspaecher)燃油蒸发控制装置：CAN011 (Delphi)氧传感器：中:CPLA-9G444-** (BOSCH)前:CPLA-9F472-C* (BOSCH)后:CPLA-9G444-H* (BOSCH)6、韩国双龙自动车株式会社(SSANGYONG MOTOR COMPANY) 2PAA3VC5550 乘用车发动机：173 910 (SSANGYONG MOTOR COMPANY)机外净化器：前:A173 142 00 01 (韩国YUNGJIN企业株式会社)后:24410-35150 (韩国YUNGJIN企业株式会社)燃油蒸发控制装置：22500-35300 (Korea Fuel-Tech Corporation) 氧传感器：前:A173 540 00 17 (HYUNDAI KEFICO)后:A173 540 01 17 (HYUNDAI KEFICO)2PMA3VC5550 乘用车发动机：173 910 (SSANGYONG MOTOR COMPANY)机外净化器：前:A173 142 00 01 (韩国YUNGJIN企业株式会社)后:24410-35150 (韩国YUNGJIN企业株式会社)燃油蒸发控制装置：22500-35300 (Korea Fuel-Tech Corporation) 氧传感器：前:A173 540 00 17 (HYUNDAI KEFICO)后:A173 540 01 17 (HYUNDAI KEFICO)7、阿萨克汽车专业维修中心LAND CRUISER 4.0L 陆地巡洋舰3956CC越野车发动机：1GR (TOYOTA)机外净化器：右前:31310 (TOYOTA)右后:TF9 (TOYOTA)左前:31310 (TOYOTA)左后:TF9 (TOYOTA)燃油蒸发控制装置：77704-***** (AISAN)氧传感器：右前:89465-***** (DENSO)右后:89465-***** (DENSO)左前:89465-***** (DENSO)左后:89465-***** (DENSO)8、美国本田制造有限公司东里博市汽车工厂TB6 乘用车发动机：J30A6 (美国本田制造有限公司Anna Engine Plant)机外净化器：右后:JC＊******** (Cardington Yutaka Technologies, Inc.) 后:PV＊******** (Cardington Yutaka Technologies, Inc.)左前:PW＊******** (Cardington Yutaka Technologies, Inc.) 燃油蒸发控制装置：F6-690-5 (Futaba Industrial CO. LTD.)氧传感器：右前:LHB (NGK Spark Plugs (U.S.A.), INC.)右后:OHY (NGK Spark Plugs (U.S.A.), INC.)左前:LHB (NGK Spark Plugs (U.S.A.), INC.)左后:OHY (NGK Spark Plugs (U.S.A.), INC.)9、瑞典沃尔沃汽车有限公司V40 T3 MV29201 乘用车发动机：B4154T4 (Volvo)机外净化器：HL-2540046-*B* (Faurecia)燃油蒸发控制装置：31338279 (Kayser)氧传感器：前:*8HL1*-254035-AA* (Denso)后:*8HL1*-254035-CA* (Denso)V40 T4 MV41H01 乘用车发动机：B4204T19 (Volvo)机外净化器：HL1*-2540046-*A* (Faurecia)燃油蒸发控制装置：31338279 (Kayser)氧传感器：前:78HL13-254035-AA* (Denso)后:78HL15-254035-CA* (Denso)V40CC T3 MZ29201 乘用车发动机：B4154T4 (Volvo)机外净化器：HL-2540046-*B* (Faurecia)燃油蒸发控制装置：31338318 (Delphi)氧传感器：前:*8HL1*-254035-AA* (Denso)后:*8HL1*-254035-CA* (Denso)V40CC T4 MZ41H01 乘用车发动机：B4204T19 (Volvo)机外净化器：HL1*-2540046-*A* (Faurecia)燃油蒸发控制装置：31338318 (Delphi)氧传感器：前:78HL13-254035-AA* (Denso)后:78HL15-254035-CA* (Denso)V60 T5 FW40CD2 乘用车S60 T5 FS40CD2 乘用车发动机：B4204T11 (Volvo)机外净化器：HL1*-2540046-*A* (Faurecia)燃油蒸发控制装置：HL-2540032-BA* (Delphi)氧传感器：前:78HL1*-254035-*A* (Denso)后:78HL1*-254035-*A* (Denso)10、日本丰田汽车公司ASV61L-BETGHC2 普通乘用车发动机：6AR (GTE)机外净化器：前:0V220 (GSC)后:RM6 (TOYOTA)燃油蒸发控制装置：77704-33160 (AISAN)氧传感器：前:89467-***** (DENSO)后:89465-***** (NTK)11、郑州日产汽车有限公司ZN6462VAU5 多用途乘用车ZN6462V1U5 多用途乘用车发动机：MR20 (东风汽车有限公司)机外净化器：前:3ET** (Calsonic Kansei)后:3ZW*** (广州三五汽车部件有限公司)燃油蒸发控制装置：14950 6N201 (上海马勒滤清系统有限公司) 氧传感器：前:211500-7520 (DENSO)后:OZA603-N14 (NTK)ZN6463VAU5 多用途乘用车ZN6463V1U5 多用途乘用车发动机：MR20 (东风汽车有限公司)机外净化器：前:3ET** (Calsonic Kansei)后:3ZW*** (广州三五汽车部件有限公司)燃油蒸发控制装置：14950 6N201 (上海马勒滤清系统有限公司) 氧传感器：前:211500-7520 (DENSO)后:OZA603-N14 (NTK)12、美国戴纳肯汽车公司Cayenne-Hybrid 卡宴2995CC越野车发动机：CGF (Audi Hungaria Motor Kft)机外净化器：右前:T7P5043 (Faurecia)右后:T7P5038 (Faurecia)左前:T7P5034 (Faurecia)左后:T7P5036 (Faurecia)燃油蒸发控制装置：T7P5033 (DYTECH)氧传感器：前:LU09 (BOSCH)后:LF07 (BOSCH)13、NISSAN MOTOR CO., LTD (日产自动车株式会社)TLSNLWLS51EXAD1V 乘用车发动机：VQ37 (NISSAN)机外净化器：右:1BH** (Calsonic Kansei Corporation)左:1BH** (Calsonic Kansei Corporation)燃油蒸发控制装置：14950 3Y500 (MAHLE Filter Systems Japan Corporation(MAHLE) )氧传感器：前:211500-7520 ( DENSO CORPORATION (DENSO) )后:OZA603-N5 (NGK SPARK PLUG CO. LTD. (NTK JAPAN) )14、上海大众汽车有限公司SVW6440ECD 多用途乘用车发动机：CSR (上海大众动力总成有限公司)机外净化器：前:34D 166 AA (上海佛吉亚红湖排气系统有限公司)后:34D 178 AA (上海佛吉亚红湖排气系统有限公司)燃油蒸发控制装置：1T0 201 801 (Dayco Italy)氧传感器：前:LX08 (联合汽车电子有限公司)后:LX08 (联合汽车电子有限公司)或发动机：CSR (上海大众动力总成有限公司)机外净化器：前:34D 166 AA (上海佛吉亚红湖排气系统有限公司)后:34D 178 AA (上海佛吉亚红湖排气系统有限公司)燃油蒸发控制装置：1T0 201 801 (Dayco Italy)氧传感器：前:LX08 (联合汽车电子有限公司)后:LX08 (联合汽车电子有限公司)或发动机：CSR (上海大众动力总成有限公司)机外净化器：前:34D 166 AA (上海佛吉亚红湖排气系统有限公司)后:34D 178 AA (上海佛吉亚红湖排气系统有限公司)燃油蒸发控制装置：1T0 201 801 (廊坊华安汽车装备有限公司)氧传感器：前:LX08 (Bosch)后:LX08 (Bosch)SVW71414KR 轿车发动机：CKA (上海大众动力总成有限公司)机外净化器：前:34D 166** (上海佛吉亚红湖排气系统有限公司) 后:34D 178** (上海佛吉亚红湖排气系统有限公司) 燃油蒸发控制装置：6RU 196 (廊坊华安汽车装备有限公司)氧传感器：前:LP15 (上海特殊陶业有限公司)后:LP15 (上海特殊陶业有限公司)或发动机：CKA (上海大众动力总成有限公司)机外净化器：前:34D 166** (上海佛吉亚红湖排气系统有限公司) 后:34D 178** (上海佛吉亚红湖排气系统有限公司) 燃油蒸发控制装置：6RU 196 (廊坊华安汽车装备有限公司)氧传感器：前:LP15 (常熟特殊陶业有限公司)后:LP15 (常熟特殊陶业有限公司)SVW71417GL 轿车发动机：CSS (上海大众动力总成有限公司)机外净化器：前:180 166 AB (上海佛吉亚红湖排气系统有限公司) 后:34D 178 AA (上海佛吉亚红湖排气系统有限公司) 燃油蒸发控制装置：180 196 (廊坊华安汽车装备有限公司)氧传感器：前:LP15 (常熟特殊陶业有限公司)后:LP15 (常熟特殊陶业有限公司)或发动机：CSS (上海大众动力总成有限公司)机外净化器：前:180 166 AB (上海佛吉亚红湖排气系统有限公司) 后:34D 178 AA (上海佛吉亚红湖排气系统有限公司) 燃油蒸发控制装置：180 196 (廊坊华安汽车装备有限公司)氧传感器：前:LP15 (常熟特殊陶业有限公司)后:LP15 (常熟特殊陶业有限公司)SVW71612VS 两用燃料轿车发动机：CUC (上海大众动力总成有限公司)机外净化器：前:34D 166 AB (上海佛吉亚红湖排气系统有限公司) 后:34D 178 AB (上海佛吉亚红湖排气系统有限公司) 燃油蒸发控制装置：6RU 196 (廊坊华安汽车装备有限公司)氧传感器：前:UE12 (NTK)后:LP15* (NTK)或发动机：CUC (上海大众动力总成有限公司)机外净化器：前:34D 166 AB (上海佛吉亚红湖排气系统有限公司) 后:34D 178 AB (上海佛吉亚红湖排气系统有限公司) 燃油蒸发控制装置：6RU 196 (廊坊华安汽车装备有限公司)氧传感器：前:UE12 (NTK)后:LP15* (NTK)15、重庆力帆乘用车有限公司LF7240B 轿车发动机：LF489Q (重庆力帆汽车发动机有限公司)机外净化器：前:GBA1205-I (无锡威孚环保催化剂有限公司)后:GBA1205-Ⅱ(无锡威孚环保催化剂有限公司) 燃油蒸发控制装置：G1130 (南京宏铮机电制造有限公司)氧传感器：前:RE94 (DELPHI)后:RE94 (DELPHI)16、东风汽车有限公司DFL6491VAL1 多用途乘用车发动机：QR25 (东风汽车有限公司)机外净化器：前:3TZ** (康奈可(广州)汽车电子有限公司)后:5BC** (康奈可(广州)汽车电子有限公司)燃油蒸发控制装置：14950 6N201 (上海马勒滤清系统有限公司) 氧传感器：前:211500-7570 (DENSO)后:OZA603-N*** (常熟特殊陶业有限公司)DFL6491VAL2 多用途乘用车发动机：QR25 (东风汽车有限公司)机外净化器：前:3TZ** (康奈可(广州)汽车电子有限公司)后:5BC** (康奈可(广州)汽车电子有限公司)燃油蒸发控制装置：14950 6N201 (上海马勒滤清系统有限公司) 氧传感器：前:211500-7570 (DENSO)后:OZA603-N*** (常熟特殊陶业有限公司)DFL6491VJL1HEV 混合动力多用途乘用车发动机：QR25 (NISSAN NORTH AMERICA)机外净化器：前:3KS*** (Faurecia)后:3KT** (CK)燃油蒸发控制装置：14950 6N201 (上海马勒滤清系统有限公司) 氧传感器：前:211500-7510 (DENSO)后:OZA603-NS25 (常熟特殊陶业有限公司)DFL6491VJL2HEV 混合动力多用途乘用车发动机：QR25 (NISSAN NORTH AMERICA)机外净化器：前:3KS*** (Faurecia)后:3KT** (CK)燃油蒸发控制装置：14950 6N201 (上海马勒滤清系统有限公司) 氧传感器：前:211500-7510 (DENSO)后:OZA603-NS25 (常熟特殊陶业有限公司)DFL6491VTL2HEV 混合动力多用途乘用车发动机：QR25 (NISSAN NORTH AMERICA)机外净化器：前:3KS*** (Faurecia)后:3KT** (CK)燃油蒸发控制装置：14950 6N201 (上海马勒滤清系统有限公司) 氧传感器：前:211500-7510 (DENSO)后:OZA603-NS25 (常熟特殊陶业有限公司)17、华新汽车香港（控股）有限公司LEXUS LX570 LX570 5663CC越野车发动机：3UR (TOYOTA)机外净化器：右前:X32 (TOYOTA)右后:72X (TOYOTA)左前:X32 (TOYOTA)左后:72X (TOYOTA)燃油蒸发控制装置：77704-***** (AISAN)氧传感器：右前:89467-***** (DENSO)右后:89465-***** (DENSO)左前:89467-***** (DENSO)左后:89465-***** (DENSO)PRADO TF2700 霸道2694CC越野车发动机：2TR (TOYOTA)机外净化器：前:UC2 (TOYOTA)后:UC2 (TOYOTA)燃油蒸发控制装置：77704-63010 (TOYOTA)氧传感器：前:89465 (DENSO)后:89465 (DENSO)18、上海汽车集团股份有限公司CSA7131MDAE 轿车发动机：13S4F (上海汽车集团股份有限公司)机外净化器：CATCC015 (优美科汽车催化剂（苏州）有限公司) 燃油蒸发控制装置：30018317 (廊坊华安汽车装备有限公司)氧传感器：前:LSF4 (联合汽车电子有限公司)后:LSF4 (联合汽车电子有限公司)CSA7131MDME 轿车发动机：13S4F (上海汽车集团股份有限公司)机外净化器：CATCC015 (优美科汽车催化剂（苏州）有限公司) 燃油蒸发控制装置：30018317 (廊坊华安汽车装备有限公司)氧传感器：前:LSF4 (联合汽车电子有限公司)后:LSF4 (联合汽车电子有限公司)CSA7143ADAR 轿车发动机：14E4E (上海汽车集团股份有限公司)机外净化器：CATCC013 (巴斯夫催化剂（上海）有限公司)燃油蒸发控制装置：WTB90133C (廊坊华安汽车装备有限公司) 氧传感器：前:LSF4 (联合汽车电子有限公司)后:LSF4 (联合汽车电子有限公司)CSA7143ADMR 轿车发动机：14E4E (上海汽车集团股份有限公司)机外净化器：CATCC013 (巴斯夫催化剂（上海）有限公司)燃油蒸发控制装置：WTB90133C (廊坊华安汽车装备有限公司) 氧传感器：前:LSF4 (联合汽车电子有限公司)后:LSF4 (联合汽车电子有限公司)CSA7151MDAE 轿车发动机：15S4C (上海汽车集团股份有限公司)机外净化器：CATCC006 (巴斯夫催化剂(上海)有限公司)燃油蒸发控制装置：30018317 (廊坊华安汽车装备有限公司)氧传感器：前:LSF4 (联合汽车电子有限公司)后:LSF4 (联合汽车电子有限公司)CSA7151MDME 轿车发动机：15S4C (上海汽车集团股份有限公司)机外净化器：CATCC006 (巴斯夫催化剂(上海)有限公司)燃油蒸发控制装置：30018317 (廊坊华安汽车装备有限公司)氧传感器：前:LSF4 (联合汽车电子有限公司)后:LSF4 (联合汽车电子有限公司)19、东风小康汽车有限公司DXK1021NK1F7 载货汽车发动机：BG10-07 (重庆渝安淮海动力有限公司)机外净化器：XK1.0L-Ⅴ(东风小康汽车有限公司)燃油蒸发控制装置：GL-I (天津市格林利福新技术有限公司)氧传感器：前:LSF4 (联合汽车电子有限公司)后:LSF4 (联合汽车电子有限公司)DXK1021TK1F 载货汽车发动机：BG10-07 (重庆渝安淮海动力有限公司)机外净化器：XK1.0L-Ⅴ(东风小康汽车有限公司)燃油蒸发控制装置：GL-I (天津市格林利福新技术有限公司)氧传感器：前:LSF4 (联合汽车电子有限公司)后:LSF4 (联合汽车电子有限公司)DXK5020CCYKF7 仓栅式运输车发动机：BG10-07 (重庆渝安淮海动力有限公司)机外净化器：XK1.0L-Ⅴ(东风小康汽车有限公司)燃油蒸发控制装置：GL-I (天津市格林利福新技术有限公司)后:LSF4 (联合汽车电子有限公司)DXK5020XXYKF7 厢式运输车发动机：BG10-07 (重庆渝安淮海动力有限公司)机外净化器：XK1.0L-Ⅴ(东风小康汽车有限公司)燃油蒸发控制装置：GL-I (天津市格林利福新技术有限公司) 氧传感器：前:LSF4 (联合汽车电子有限公司)后:LSF4 (联合汽车电子有限公司)DXK5021CCYK1F 仓栅式运输车发动机：BG10-07 (重庆渝安淮海动力有限公司)机外净化器：XK1.0L-Ⅴ(东风小康汽车有限公司)燃油蒸发控制装置：GL-I (天津市格林利福新技术有限公司) 氧传感器：前:LSF4 (联合汽车电子有限公司)后:LSF4 (联合汽车电子有限公司)DXK5021CCYK1F7 仓栅式运输车发动机：BG10-07 (重庆渝安淮海动力有限公司)机外净化器：XK1.0L-Ⅴ(东风小康汽车有限公司)燃油蒸发控制装置：GL-I (天津市格林利福新技术有限公司) 氧传感器：前:LSF4 (联合汽车电子有限公司)后:LSF4 (联合汽车电子有限公司)DXK5021XXYK1F 厢式运输车发动机：BG10-07 (重庆渝安淮海动力有限公司)机外净化器：XK1.0L-Ⅴ(东风小康汽车有限公司)燃油蒸发控制装置：GL-I (天津市格林利福新技术有限公司) 氧传感器：前:LSF4 (联合汽车电子有限公司)后:LSF4 (联合汽车电子有限公司)DXK5021XXYK1F7 厢式运输车发动机：BG10-07 (重庆渝安淮海动力有限公司)机外净化器：XK1.0L-Ⅴ(东风小康汽车有限公司)燃油蒸发控制装置：GL-I (天津市格林利福新技术有限公司) 氧传感器：前:LSF4 (联合汽车电子有限公司)后:LSF4 (联合汽车电子有限公司)20、重庆长安汽车股份有限公司SC7168CY5 轿车SC7168CHY5 轿车发动机：JL478QEB (重庆长安汽车股份有限公司)机外净化器：CZ60ZS5G-5 (重庆长安汽车股份有限公司)燃油蒸发控制装置：QXTZ80 (南京宏铮机电制造有限公司)后:LSF4 (联合汽车电子有限公司)21、江苏九龙汽车制造有限公司HKL6490E 多用途乘用车发动机：4G69S4N (沈阳航天三菱汽车发动机制造有限公司)机外净化器：前:1205100V9010 (无锡威孚环保催化剂有限公司) 后:1205200V9010 (无锡威孚环保催化剂有限公司) 燃油蒸发控制装置：GL-Ⅱ(天津格林利福新技术有限公司)氧传感器：前:RE94 (北京德尔福万源发动机管理系统有限公司) 后:RE94 (北京德尔福万源发动机管理系统有限公司) 或发动机：4G69S4N (沈阳航天三菱汽车发动机制造有限公司)机外净化器：前:1205100V9010 (无锡威孚环保催化剂有限公司) 后:1205200V9010 (无锡威孚环保催化剂有限公司) 燃油蒸发控制装置：GL-Ⅱ(天津格林利福新技术有限公司)氧传感器：前:RE94 (北京德尔福万源发动机管理系统有限公司) 后:RE94 (北京德尔福万源发动机管理系统有限公司)22、一汽海马汽车有限公司HMC7158B5S0 轿车发动机：HM474Q-T (一汽海马汽车有限公司)机外净化器：前:BF20C (天津卡达克汽车高新技术公司)后:BF20D (天津卡达克汽车高新技术公司)燃油蒸发控制装置：BF42A (天津市格林利福新技术有限公司) 氧传感器：前:LSF4 (联合汽车电子有限公司)后:LSF4 (联合汽车电子有限公司)或发动机：HM474Q-T (一汽海马汽车有限公司)机外净化器：前:BF20C (天津卡达克汽车高新技术公司)后:BF20D (天津卡达克汽车高新技术公司)燃油蒸发控制装置：BF42A (天津市格林利福新技术有限公司) 氧传感器：前:LSF4 (联合汽车电子有限公司)后:LSF4 (联合汽车电子有限公司)HMC7180B5T1 轿车发动机：HM484Q-T (一汽海马汽车有限公司)机外净化器：前:AL20A (天津卡达克汽车高新技术公司)后:AL20B (天津卡达克汽车高新技术公司)燃油蒸发控制装置：BF42A (天津市格林利福新技术有限公司) 氧传感器：前:LSF4 (联合汽车电子有限公司)后:LSF4 (联合汽车电子有限公司)23、北汽福田汽车股份有限公司BJ5030XSH-A2 售货车BJ5030XSH-X1 售货车发动机：LJ465Q-2AE (柳州五菱柳机动力有限公司)机外净化器：L0125020018A0 (北汽福田汽车股份有限公司)燃油蒸发控制装置：GL-Ⅰ(天津市格林利福新技术有限公司)氧传感器：前:VA21104 (北京阳光泰克科技有限公司)后:VA21104 (北京阳光泰克科技有限公司)BJ5032XLC-F2 冷藏车发动机：LJ465Q-2AE (柳州五菱柳机动力有限公司)机外净化器：L0125020018A0 (北汽福田汽车股份有限公司)燃油蒸发控制装置：GL-Ⅰ(天津格林利福新技术股份有限公司)氧传感器：前:VA21104 (北京阳光泰克科技有限公司)后:VA21104 (北京阳光泰克科技有限公司)24、宁波凯福莱特种汽车有限公司NBC5030XJH51 救护车发动机：CJK (大众汽车股份公司)机外净化器：前:7E0 166 *(*) (TENNECO)后:7E0 178 *(*) (TENNECO)燃油蒸发控制装置：7H0 196 (*) (DYTECH)氧传感器：前:LU09 (BOSCH)后:LF07 (BOSCH)NBC5037XFZ01 福祉车发动机：2TR (日本丰田公司)机外净化器：前:HC2D180001 (天津市神驰汽车零部件有限公司)后:HC2D180002 (天津市神驰汽车零部件有限公司)燃油蒸发控制装置：QXTZ80 (南京宏铮机电制造有限公司)氧传感器：前:89467-26050 (DENSO)后:89465-26140 (DENSO)NBC5037XFZ02 福祉车发动机：4RB2 (绵阳新晨动力机械有限公司)机外净化器：前:HC2D190001 (无锡威孚力达催化净化器有限责任公司) 后:HC2D190002 (无锡威孚力达催化净化器有限责任公司) 燃油蒸发控制装置：QXTZ80 (南京宏铮机电制造有限公司)氧传感器：前:LSF4 (联合汽车电子有限公司)后:LSF4 (联合汽车电子有限公司)NBC5037XJH01 救护车发动机：2TR (日本丰田汽车公司)机外净化器：前:HC2D180001 (天津市神驰汽车零部件有限公司)后:HC2D180002 (天津市神驰汽车零部件有限公司)燃油蒸发控制装置：QXTZ80 (南京宏铮机电制造有限公司)氧传感器：前:89467-26050 (DENSO)后:89465-26140 (DENSO)NBC5037XJH02 救护车发动机：4RB2 (绵阳新晨动力机械有限公司)机外净化器：前:HC2D190001 (无锡威孚力达催化净化器有限责任公司) 后:HC2D190002 (无锡威孚力达催化净化器有限责任公司) 燃油蒸发控制装置：QXTZ80 (南京宏铮机电制造有限公司)氧传感器：前:LSF4 (联合汽车电子有限公司)后:LSF4 (联合汽车电子有限公司)25、上汽通用五菱汽车股份有限公司LZW6455JY 多用途乘用车LZW6455JVY 多用途乘用车发动机：L2B (上汽通用五菱汽车股份有限公司)机外净化器：BCSC-G025 (巴斯夫催化剂(上海)有限公司)燃油蒸发控制装置：CNS0001 (柳州舜泽尔汽车零部件有限公司)氧传感器：前:OSP-b (北京德尔福万源发动机管理系统有限公司)后:OSP-b (北京德尔福万源发动机管理系统有限公司)26、江铃控股有限公司JX7200L 轿车发动机：4G63S4T (沈阳航天三菱汽车发动机制造有限公司)机外净化器：前:FC315 (福建朝日环保科技开发有限公司)后:FM315 (福建朝日环保科技开发有限公司)燃油蒸发控制装置：E32 (神龙塑胶件制造有限公司)氧传感器：前:RE94 (DELPHI)后:RE94 (DELPHI)27、英国宾利汽车有限公司CONTINENTAL FLYING SPUR W12C5 乘用车发动机：CKH (Bentley)机外净化器：前右:3W0 166 *(*) (Boysen)前左:3W0 166 *(*) (Boysen)后右:3W0 178 *(*) (Boysen)后左:3W0 178 *(*) (Boysen)燃油蒸发控制装置：3D0 201 801 *(*) (Dayco)氧传感器：前:LU 09 (Bosch)后:LF 07 (Bosch)28、加利福尼亚康福特汽车有限公司F-150 SVT RAPTOR 越野货车（福特改装车）发动机：BOSS (FORD)机外净化器：右:5K282 (FoMoCo)左:5K282 (FoMoCo)燃油蒸发控制装置：9D653 (FORD)氧传感器：右前:0258017 (FoMoCo)右后:1051033 (BOSCH)左前:0258017 (FoMoCo)左后:1051033 (BOSCH)29、青岛五菱专用汽车有限公司WLQ5029XLCBCY 冷藏车发动机：LD6 (上汽通用五菱汽车股份有限公司)机外净化器：CONV-A5-02 (巴斯夫催化剂(上海)有限公司)燃油蒸发控制装置：GL (柳州舜泽尔汽车零部件有限公司、天津市格林利福新技术有限公司)氧传感器：前:LSF4.2 (联合汽车电子有限公司)后:LSF4.2 (联合汽车电子有限公司)30、厦门金龙联合汽车工业有限公司XMQ5030XJH05 救护车XMQ5031XJH05 救护车发动机：V20 (绵阳新晨动力机械有限公司)机外净化器：前:LY-KL-30003 (南皮县绿源环保设备有限公司)后:LY-KL-30004 (南皮县绿源环保设备有限公司)燃油蒸发控制装置：30037A (厦门信源环保科技有限公司)氧传感器：前:RE94 (北京德尔福技术开发有限公司)后:RE94 (北京德尔福技术开发有限公司)31、沈阳华晨金杯汽车有限公司SY5032XJHJ-G9S1BG 监护型救护车发动机：2TR (日本丰田公司)机外净化器：前:HC2D180001 (天津市神驰汽车零部件有限公司)后:HC2D180002 (天津市神驰汽车零部件有限公司)燃油蒸发控制装置：GL-Ⅱ(天津市格林利福新技术有限公司)氧传感器：前:89467-26050 (DENSO)后:89465-26140 (DENSO)或发动机：2TR (日本丰田公司)机外净化器：前:HC2D180001 (天津市神驰汽车零部件有限公司)后:HC2D180002 (天津市神驰汽车零部件有限公司)燃油蒸发控制装置：QXTZ80 (南京宏铮机电制造有限公司)氧传感器：前:89467-26050 (DENSO)后:89465-26140 (DENSO)SY5032XJHJ-M1S1BG 监护型救护车发动机：4RB2 (绵阳新晨动力机械有限公司)机外净化器：前:HC2D190001 (无锡威孚力达催化净化器有限责任公司) 后:HC2D190002 (无锡威孚力达催化净化器有限责任公司) 燃油蒸发控制装置：QXTZ80 (南京宏铮机电制造有限公司)氧传感器：前:LSF 4 (联合汽车电子有限公司)后:LSF 4 (联合汽车电子有限公司)或发动机：4RB2 (绵阳新晨动力机械有限公司)机外净化器：前:HC2D190001 (无锡威孚力达催化净化器有限责任公司) 后:HC2D190002 (无锡威孚力达催化净化器有限责任公司) 燃油蒸发控制装置：GL-Ⅱ(天津市格林利福新技术有限公司)氧传感器：前:LSF 4 (联合汽车电子有限公司)后:LSF 4 (联合汽车电子有限公司)SY5038XDWL-M1S1BH 流动服务车发动机：4RB2 (绵阳新晨动力机械有限公司)机外净化器：前:HC2D190001 (无锡威孚力达催化净化器有限责任公司) 后:HC2D190002 (无锡威孚力达催化净化器有限责任公司) 燃油蒸发控制装置：QXTZ80 (南京宏铮机电制造有限公司)氧传感器：前:LSF 4 (联合汽车电子有限公司)后:LSF 4 (联合汽车电子有限公司)SY5038XJHL-G9Z1BH 救护车发动机：2TR (日本丰田公司)机外净化器：前:HC2D180001 (天津市神驰汽车零部件有限公司)后:HC2D180002 (天津市神驰汽车零部件有限公司)燃油蒸发控制装置：QXTZ80 (南京宏铮机电制造有限公司)氧传感器：前:89467-26050 (DENSO)后:89465-26140 (DENSO)32、和合加利福尼亚汽车集团公司CAYENNE 3.6L 越野乘用车（保时捷改装车）（5座）发动机：CEY (Dr.Ing.h.c.f.Porsche AG)机外净化器：右:T7P5041 (JOHNSON MATTHEY)左:T7P5041 (JOHNSON MATTHEY)燃油蒸发控制装置：7P0.196 (Delphi)氧传感器：右前:LU09 (Bosch)右后:LF07 (Bosch)左前:LU09 (Bosch)左后:LF07 (Bosch)ML400 越野乘用车(奔驰改装车)(5 座)发动机：276821 (BENZ)机外净化器：右:KT 0271 (戴姆勒股份公司)左:KT 0271 (戴姆勒股份公司)燃油蒸发控制装置：AF 0016 (Daimler AG ww./opt. Mahle)氧传感器：右前:OS 0007 (Bosch)右后:OS 0005 (Bosch)左前:OS 0007 (Bosch)左后:OS 0005 (Bosch)33、东风柳州汽车有限公司LZ6443XQ15M 多用途乘用车发动机：4A91S (沈阳航天三菱汽车发动机制造有限公司)机外净化器：前:BM3-1205030 (昆明贵研催化剂有限责任公司) 后:BM3-1205040 (昆明贵研催化剂有限责任公司) 燃油蒸发控制装置：B-1130200 (厦门信源环保科技有限公司) 氧传感器：前:LSF4 (联合汽车电子有限公司)后:LSF4 (联合汽车电子有限公司)。