铝箔英文版的MSDS

铝箔英文版的MSDS

Aluminum Foil MSDS (Material Safety Data Sheet)

1. Identification

Product Name: Aluminum Foil

Chemical Formula: Al

CAS Number: 7429-90-5

Synonyms: Aluminium foil, al-foil

Emergency Phone Number: [Emergency Phone Number]

2. Hazard Identification

Classification:

- Eye Irritation (Category 2A)

- Skin Irritation (Category 2)

- Acute Toxicity – Inhalation (Category 4)

- Chronic Aquatic Toxicity (Category 3)

Potential Hazards:

- Causes eye irritation.

- May cause skin irritation.

- Can be harmful if inhaled. - May cause long-term adverse effects in the aquatic

environment.

Chemical Name: Aluminum foil

CAS Number: 7429-90-5

Concentration: 100%

4. First Aid Measures

- Eye Contact: Rinse thoroughly with water for several

minutes, remove contact lenses if present and easy to do. Seek

medical attention if irritation persists.

- Skin Contact: Wash with soap and water. Seek medical

attention if irritation occurs or persists.

- Inhalation: Remove to fresh air. If experiencing

respiratory symptoms, seek medical attention.

- Ingestion: Rinse mouth, do NOT induce vomiting. Seek

medical attention if necessary.

5. Firefighting Measures

- Suitable Extinguishing Media: Water spray, foam, dry

chemical, or carbon dioxide.

- Specific Hazards Arising from the Chemical: Aluminum may

form explosive mixtures with oxidizing agents (e.g., chlorine,

fluorine). - Special Protective Equipment and Precautions for

Firefighters: Wear full protective clothing and self-contained

breathing apparatus (SCBA).

6. Accidental Release Measures

- Personal Precautions: Wear appropriate protective

equipment (gloves, safety glasses, and respiratory protection)

when handling and cleaning spills.

- Environmental Precautions: Avoid release into the

environment. Contain and collect any spilled material.

- Clean-up Procedures: Sweep up or vacuum spills carefully.

Avoid generating dust. Place material in appropriate containers

for disposal.

7. Handling and Storage

- Handling: Avoid eye and skin contact. Use in a well-ventilated area. Wash hands thoroughly after handling.

8. Exposure Controls/Personal Protection

- Engineering Controls: Use local exhaust ventilation to

maintain airborne concentrations below occupational exposure

limits.

- Personal Protective Equipment:

- Eye/Face Protection: Safety glasses or goggles. - Skin Protection: Wear gloves and protective clothing to

minimize skin contact.

- Respiratory Protection: Use a NIOSH-approved respirator if

airborne concentrations exceed the occupational exposure limits.

9. Physical and Chemical Properties

- Appearance: Silver metal foil

- Odor: Odorless

- Melting Point: 660.32°C (1220.58°F)

- Boiling Point: 2470°C (4478°F)

- Solubility: Insoluble in water

- Density: 2.70 g/cm³

- Vapor Pressure: Not applicable

10. Stability and Reactivity

- Stability: Stable under normal conditions.

11. Toxicological Information

- Acute Toxicity: Low acute toxicity by inhalation,

ingestion, and dermal exposure.

- Eye/Skin Irritation: May cause moderate irritation to the

eyes and skin.

- Sensitization: No data available. - Carcinogenicity: Aluminum is not classified as a human

carcinogen by IARC, NTP, or OSHA.

- Chronic Toxicity: Prolonged or repeated exposure may cause

adverse effects in the aquatic environment.

12. Ecological Information

- Ecotoxicity: Toxic to aquatic organisms. May cause long-term adverse effects in aquatic environments.

13. Disposal Considerations

- Disposal: Dispose of the material and its container in

accordance with local, regional, or national regulations.

14. Transportation Information

- Not a dangerous good according to transport regulations.

15. Regulatory Information

- Listed on the TSCA inventory.

16. Other Information

- This MSDS contains valuable information critical to the

safe handling, storage, and disposal of the product.