下载文档原格式
GSG Diffuser Style Barrel Pump ISO 13709 (API 610) Type BB5Extensive Product RangeSulzer Pumps has a long history of providing innovative pumping solutions to business partners in the following industries:Oil & GasHydrocarbon Processing Pulp and Paper Power Generation Food, Metals & Fertilizers Water and WastewaterHydrocarbon ProcessingHydrocarbon extraction plants,refineries, petrochemical plants and gas plants operate sophisticated production processes requiring reliable pumping solutions.Continuous product innovations such as our improved line of hermetically sealed, horizontal and vertical process pumps, are helping the industry improve its operational efficiency.Sulzer Pumps, with its high-quality product line, is known for being able to consistently meet these expectations.All our pumps are engineered in line with the latest standards issued by API, ISO and ANSI in order to ensure reliable and safe operation at your site. The Hydrocarbon Processing Industry is one of the core business segments within Sulzer Pumps.Following industry practice, we further subdivide the segment into:Synfuels Refining Gas Processing Petrochemicals Nitrogenous FertilizerThe market - and therefore our customers - requires specialty applications for each subsegment.Application RangeThousands of GSG pumps are installed around the world. They are found in:Power Plants RefineriesPetrochemical Plants Gas Processing Plants Onshore and offshore water injection servicesOnshore and offshore crude shipping serviceOnshore crude oil, refined product and LPG pipeline servicesHigh pressure and high or low temperatures are GSG services.DesignThe GSG is built to the latest edition of ISO 13709 (API 610). It is a type BB5,horizontal, radially split, diffuser type,multistage barrel pump. The rotor stack can be either inline (all the impellers facing towards the driver) or back-to-back. On the smaller pumps,the inboard seal chamber and bearing housing must be removed for cartridge removal. On larger pumps,the entire cartridge can be removed as an assembly to speed overhaul or re-rate turnaround time.The barrel is available as either a casting or forging with a variety of flange ratings to meet individual specifications. It is normally centerline supported for thermal stability and maximum nozzle load capacity. The barrel closure is either the traditional flanged head-studs and nuts, flanged head-Supernuts™, or Sulzer’s patented Twistlock closure for speedy removal and assembly.The inner cartridge consists of stacked diffuser/impeller sets. A double suction first stage impeller is available on all but the smallest sizes.Axial thrust is compensated by a balance drum for inline stacked rotors.The diffusers hydraulically balance radial forces. For those services where intermediate pressure takeoff is needed, higher flow diffuser/impeller sets can be utilized up to the takeoff stage, and then lower flow sets are used after the takeoff stage to optimize efficiency and performance.When design conditions change, re-rates are similarly achieved using different diffuser/impeller combin-ations, or blank stages—all in the same barrel.For applications on light gravity fluids with many stages, a back-to-back rotor stack is utilized to allow direct drive at normal motor speeds and provide improved rotordynamics. In such rotors, the opposed impellers cancel most of the axial thrust. The center bushing and throttle bushings take most of the residual axial thrust,so the thrust bearing loads are minimal. The back-to-back design allows the use of a 7300 series ball thrust bearing—and saves the substantial cost and maintenance components associated with lube oil systems. For high pressure and high energy levels, inline, or back-to-back stack, high speed, semi-stiff rotor designs are available.Depending upon pump size, power,and rotor design, the pumps can be supplied with ring oil or oil mist lubricated antifriction bearings, ring oil lubricated sleeve radial—ball thrust bearings, or pressure lubricated sleeve radial—tilting pad thrust bearings.MaterialsAll common ISO 13709 (API 610)material combinations are available.GSG Inline Design Features and BenefitsCasing CoverFlanged head, studs/nuts Flanged head, Supernuts™O-ring or spiral wound gasketMechanical SealsThrust Bearingbrass cages, orforce INPRO™with 360°Wear parts offered are the result of a year of wear testing by Sulzer Variety of materials, hardness, and hard coatings available depending on pump material and application PEEK with reduced clearances available on clean fluids for enhanced efficiencyfitsFor HPI applications shrink fit, axially secured impellers, and stepped shaft at each stageBlank stages can be supplied for future conditionsInterstage TakeoffPartial flow takeoff from intermediate stageAble to stack high capacity and low capacitydiffusers/impellers on same rotor for optimized stagetakeoffCommon on boiler feed pumps Available on recycle process applications Saves cost of additional pumpFirst Stage ImpellerLow Nss design is standardDouble suction available on all butsmallest sizesImproved NPSHr designs availableRadial BearingsInpro™bearing isolatorCarbon steel bearing housing with360°supportRing oil or oil mist lubricated rolleror ball bearing with C-3 clearanceRing oil or force feed lubricatedsleeve bearingsavailableRobust Shaft and RotorDesigned for low stress levelFully machinedDynamically balancedStraight bore, tapered bore, orhydraulic fit under couplingavailable per ISO 13709 (API610)BarrelCenterline mounted for thermal stabilityand maximum nozzle load capabilityCast with nozzles and flangesForged barrel with NDE of nozzle weldsWarm-up flow through discharge drain notrequired below 260°C (500°F). Warm-upflow required for higher temperaturesPin-and-key-slot thermal expansionsystemJacketing, insulation or noise blanketsavailablePump Inner Cartridge AssemblyStage casings sealed by dischargepressureFree to expand towards discharge coverduring warm-upInner tie bolts for assembly/disassemblyCoupling hub, inboard radial bearing and inboard seal chamber removal required on small pumps to remove cartridgeLarger pumps have barrel bore diameters larger than bearing housing which allows cartridge to be removed with those partsassembledCenter and throttle bushing absorb residualthrust and only breakdown half of dischargeAxial thrust stable even with worn clearances BearingsInpro™360°First Stage ImpellerLow Nss design is standardDouble suction available on all but smallest sizes Improved NPSHr designs availableBarrelCenterline mounted on hot servicesGSG InlineFulfills the majority of requirements for BB5 pumps with either cast or forged barrels to meet customerspecifications.Multivane diffusers balance radial loads. Balancingdrum takes the majority of axial thrust load. Heavyduty bearings support the rotor and carry residualthrust loads.Smaller size pumps fitted with ring oil lubricated antifriction bearings. Oil mist lubrication optionalAll but smallest sizes may be fitted with pressure lubricated sleeve radial, double acting tilting pad thrust bearings, lube oil systems, bearing RTD’s, X-Y vibration probes and Keyphasor, etc.Maximum number of interchangeable stage pieces minimizes spares parts inventoryIn direct drive applications, clearly the best selection up to stage limits. If still more head is needed, first consider GSG back-to-back and direct drive. If that does not meet head requirement, then consider GSG inline with higher Speed—using gear box or VFD.For very high head and high energy levels beyond GSG back-to-back direct drive capabilities, GSG with semi-stiff rotor design (like Sulzer’s HPcp, HPT pumps) can be offered. Could justify stand-alone, single unit—no standby. Discussion recommended.GSG: Inline and Back-to-Back Design Features and BenefitsGSG Back-to-BackWith up to 16 stages available, fulfills direct driveapplications that require more head than is availablefrom direct drive inline GSGMultivane diffusers balance radial loads. Opposedimpellers balance majority of axial thrust. Centerbushing and throttle bushing take nearly all the residualaxial thrust. Even when clearances are worn, axialand radial loads remain balanced.Fan cooled, ring oil lubricated, sleeve / ball thrust bearing without lube systems are common up to ISO 13709 (API 610) Table 9 limits, or Sulzer limits depending upon application. Significantly reduces installed cost and provides simple, reliable pumps.When even high speed GSG with semi-stiff inline rotor does not meet head requirements, or cannot meet rotordynamic requirements a GSG with semi-stiff back-to-back rotor can be offered.To speed the repair of a GSG pump,larger sizes are designed using that cartridge concept. The pump coupling hub, inboard bearing housing, seal chamber and hydraulic cartridge slide through the barrel for quick removal.Re-installation is just as fast. For evenfaster turnaround, the Sulzer patented Twistlock design puts an end to hours of torquing the barrel cover nuts. For remote locations or offshore this can be especially time and cost saving.Small GSG pump barrel bore are so small that the coupling hub, sealchamber and bearing housing will not fit through. Those parts have to be removed on those pumps before the cartridge is pulled.Rapid pump dismantlingThe innovative Sulzer Twistlock barrel cover design provides effective sealing and eliminates the usual requirements of torquing many fasteners to very high values—taking hours. The Twistlock also reduces the end cover flange area required thus reducing weight—an added bonus for offshore installations.Sulzer’s patented TwistlockThe assembled cartridge can be removed as one piece on larger pumps.Installation sequence:Cover in placeCover introduced and partially rotatedCover locked and securedOther Sulzer Barrel Pump ModelsWhen preferred or for erosive, sandy services, Sulzer’s CP opposed impeller, dual volute barrel pumps are proven performers. Heads to 6,700 m (22,000 ft)Sulzer’s HPcp (inline or back-to-back) is the global leader in large water injection services from 5 MW to 30 MW.Heads to 6,500 m (21,000 ft)Sulzer’s HPT boiler feed pumps are renowned for their reliability. Sizes to over 40 MW (55,000 hp) cover the majority of power plant needs.Performance RangeOperating DataQ (m 3/h)Q (USgpm)Bearing optionsFan cooled ring oil, or oil mist lubricated antifrictionbearings, orRing oil lubricated sleeve radial bearings withantifriction thrust bearing, orForce feed lubricated sleeve radial bearing and double acting tilting pad thrust bearingA variety of bearing instrumentation is available tomeet specificationsRotor and Impeller optionsFor ISO 13709 (API 610) applications, impellers areindividually axially secured and are shrink fit to theshaft—which is stepped under each impeller for ease of assemblyFor other applications a slip-fit impeller stack isavailableStraight bore, tapered bore, or hydraulic fit couplinghub is available per ISO 13709 (API 610)GSG “inline” or “back-to-back” rotor design.Double Suction first stage impeller for lower NPSHr.High temperatures and options for bottoms / residuesProven coke crusher available for services with coke particlesPump warm-up not required below 260°C (500°F).Warm-up flow required for higher temperaturesPin-and-block thermal expansion system provided on hot servicesJacketing, insulation or noise blankets availableGSG OptionsCheck our worldwide offices at*******************************E 00612 10.2004 Copyright ©Sulzer PumpsThis brochure is a general presentation. It does not provide any warranty or guarantee of any kind. Please, contact us for description of the warranties and guarantees offered with our products. Directions for use and safety will be given separately. All information herein is subject to change without notice.。
fb离心泵需用泵来供水先等。
在电力部门，核电站需要核主泵、二级泵、三级泵、热电厂需要大量的锅炉给水泵、冷凝水泵、循环水泵和灰渣泵等。
在国防建设中，飞机襟翼、尾舵和起落架的调节、军舰和坦克炮塔的转动◆一用一备，运行可靠专有技术体现内置自动换向运行装置的独特构思，当一台发生故障，另一台自动投入运行，保证供水不中断◆成熟可靠的核心部件和优化设计, 节能效果好内置自动换向装置精心设计制作，强化其组装质量和形位公差控制、实现其灵活、密封、可靠、耐用度高；波纹管机械密封和强制环流冷却循环系统比一般离心泵的普通机封寿命长2倍以上；机泵同轴震动小；对流道结构作了优化设计，保证高效运行。
配用Y2系列电机，效率提高2-4%、F级绝缘、电机耐热145℃以上,特殊结构的叶轮，优化的水力模型使液体流动更加顺畅，采用树脂砂造型铸件，铸件内部过流部件其表面粒度均匀、平滑光洁，水力损失小，保证其最佳性能。
◆简化系统环节，提高可靠性出水管道连接、阀类、附件、配件等对于采用备用泵设计而言，数量减少，系统环节简化，可靠性提高，维护简便。
Y2电机超载能力强、即使在145℃仍可在额定功率下可靠运行。
◆降低机组噪声，有利于环保双联泵将原单体水泵配套电机的功率数一分为二，降低了起动电流和起动噪声,降低单电机的功率数也就降低电机的噪音分贝，从而有效的降低了水泵机组的噪声。
◆降低安装费用50%，简化安装工序泵体的安装与输水管路的连接仅需一套管、阀、附件、泵基座，极大地简化了安装，与普通管道泵相比，既节省安装费用又缩短了工期，使投资大幅度减少◆节省机组占地面积双联泵的独特设计思想，大大节省泵房和管路的占地面积50%以上，由于减少基建投资、节省占地面积、便于系统整体管理。
◆运行费用，降低50% ～70% 用水呈高峰、低估连续或阶梯形变化的应用工况（如供暖和冷却系统），在用水低谷时，双联泵为单泵运行模式，在用水高峰时，双联泵可双泵运行，从而实现了工作的高效节能。
ih型化工离心泵参数
IH型化工离心泵适用于化工厂，用来输送不含固体颗粒，粘度类似于水的腐蚀性液体，被输送介质温度一般为20℃～105℃。
泵的最高工作压力为1.6 Mpa，进口压力不高于0.6Mpa。
产品介绍
适用于化工厂，用来输送不含固体颗粒，粘度类似于水的腐蚀性液体，被输送介质温度一般为20℃～105℃。
泵的最高工作压力为1.6 Mpa，进口压力不高于0.6Mpa。
参数范围
流量Q 6.3~400m3/h
扬程H 5~125m
型号说明
IH50－32－125A
IH－单级单吸化工离心泵
50－泵吸入口直径为50mm
32－泵出口直径为32mm
125－叶轮名义直径为125mm
A－叶轮外径的改变。
结构型式
IH型泵为单级单吸悬架式离心泵，其结构为后开门，即泵体不动，叶轮能从泵体后面取出，而不必拆动泵进出口管道。
IH型泵的轴封可根据用户要求装填料密封或机械密封，轴承为滚动轴承，用稀油润滑。
旋转方向
从电机端看，泵为顺时针旋转。
主要零件材质
与介质接触零件材质为合金不锈钢，主要牌号：ZG1Cr18Ni9，ZGCr18Ni12Mo2Ti等。
成套范围
成套供应泵，电动机、公用底座、联轴器等，还提供止回阀、闸阀。
，1，。
220V/380V防爆抽油泵使用说明及介绍220v防爆抽油泵：用来输送汽油、煤油、柴油、航空煤油等石油产品；介质温度在-20℃～+80℃，是一种优良的船用装卸油泵，可兼作扫舱水泵。
并适用于陆地油库、油罐车等储油装置的油料输送，也可以用来输送海水、淡水等220v防爆抽油泵产品介绍1、泵体材料为HT200，有较好的机械性能。
2、叶片材料为硬质石墨，自润滑减磨性能好，经久耐用。
3、密封材料为丁晴橡胶，耐油性能好，密封可靠。
4、各部精度高，粗糙度好，因而噪声低。
5、采用无油自润滑轴承，使用寿命长。
6、真空度高，吸程大。
7、结构紧凑，重量轻。
8、设计合理，理论排量大。
9、原材料消耗少，价格低。
10、安装方便省力。
出口压力：0.18-0.2MPa公称流量：65~100L/min真空表示值为：0.054MPa时≥50真空表示值为：0.04MPa时≥55真空表示值为：0.01MPa时≥60进油口真空≥0.054耐压：0.2MPa转速：520选配电机：220V防爆/不防爆380V防爆配套电机功率：0.75KW一、220v防爆抽油泵概述我厂生产的手提式电动不锈钢油桶泵，是集取手压油桶泵，手摇油桶泵，提油泵，手动隔膜泵等吸油工具之精华，经我厂科研人员精心设计试制并交几十家工厂、商店、仓库等部门吸油试用，均得到高度的赞扬，从86年起投入批量生产，近29个省、市、自治区及港、澳客商深受广大用户的好评。
该泵操作简便，使用省力，吸油省时适用于各工矿企业、商店、仓库、供销社个体加油点（站）、搬运站、汽车轮船等部门的吸油（工业用油、食用油）及其它液体，本泵外壳采用铝合金、不锈钢管制成，具有体积小、重量轻、使用灵活、经久耐用、携带方便等特点，确是最经济、最实用的普及型吸油的理想工具。
二、220v防爆抽油泵使用方法1.先将出油管互相连接，并拧紧罗旋2.把泵体插入油桶3.插上220V电源4.推动手柄上开关，即可出油220v防爆抽油泵三、保养与维修1.保养：用毕请取下电源插头，将泵体取出油桶，放在阴凉处，并将泵体内的液体放完，切勿让阳光直接晒射、雨淋。
目录第一章概述 (3)1.1公司介绍及产品概述 (3)第二章主要技术及功能 (4)2.1产品概述 (4)2.2命名规则 (4)2.3产品分类与特点 (5)2.3.1分类 (5)2.3.2特点 (5)2.4外形尺寸 (5)2.5往复式注射泵基本参数 (6)2.5.1基本参数表 (6)2.5.2往复式注射泵电机说明书 (7)2.5.3往复式注射泵计数复位光耦说明书 (8)2.6端口定义 (9)第三章往复式注射泵控制代码说明 (10)3.1概述 (10)3.2安装调试 (10)3.3代码说明 (10)3.3.1控制命令格式 (10)3.3.2命令格式说明 (11)第四章应用举例说明 (14)4.1单头往复式注射泵 (14)4.2双头往复式注射泵 (14)4.3简易故障排查 (15)第五章技术服务 (16)第一章概述1.1公司介绍及产品概述南京润泽流体控制设备有限公司成立于2014年，是一家分析仪器配件供应商、专注于流体配件研发生产的国家高新技术企业，产品包含注射泵、切换阀、高压阀、气密性进样器、蠕动泵、管路接头等标准产品，涵盖了从产品定制、设计研发、生产制造、销售及售后的整个产业链，持之以恒地为环境监测、生物制药、医疗设备、工业自动化和实验室仪器等领域提供优质的产品和服务。
自成立以来，润泽通过了ISO9001认证，先后获得“国家高新技术企业”、“江苏省民营科技企业”等认证，并被南京银行评为5A级信用用户。
凭借着对高新技术的追求，历经多年的研发投入与积累，公司获得了流体领域38项专利技术及多个软件著作权，其中发明专利8项，实用新型专利17项，外观设计专利13项。
润泽始终聚焦战略，自主创新，准确把握流体设备行业大趋势，在系列产品的核心技术方面进行了持续的、大量的研发投入，使公司在分析仪器配件生产销售上取得巨大优势，始终处于行业前沿。
润泽技术中心拥有EMC可靠实验室、进口白光干涉仪、基恩士平面快速检测仪、五轴加工中心、高精度纳米研磨机器等一系列先进的加工设备及检测仪器，采用领先的生产工艺和技术，全面推行精益生产理念，始终保持专业化的国际一流生产制造能力。
产品概述：IH系列标准化工泵属卧式、单级、单吸离心泵；其尺寸和性能符合DIN24256/ISO2858标准，是目前国内应用比较广泛的化工泵产品。
产品用途：IH系列标准化工泵主要用于输送清洁的或污染的、低温或高温的、化学中性或腐蚀性的液体。
主要适用于：
有色冶金、制酸制碱、化学和石油化学工业、合成纤维和塑料工业、化肥、化工、制药、食品、制糖业、环境保护、一般工业应用
产品参数：
流量（Q）：可达400m3/h
扬程（H）：可达160m
工作压力（P）：1.6MPa
工作温度（t）：-80℃～+280℃
轴封：采用单端面机械密封、双端面机械密封、动力密封及填料密封，可根据用户要求任意选择。
材质：目前我公司的耐腐蚀材料，完全能满足上述各种介质的要求。
订货时，请用户提供所要输送介质的详细情况。
IH80-50-200型单级单吸化工离心泵 IH80-50-200型单级单吸化工离心泵是单级单吸悬臂式离心泵，其标记额定性能点和尺寸等效果用国际标准IS02858-1975(E)，是一种用以取代F型耐腐蚀泵更新换代的节能产品，该系列化工离心泵根据节能型泵的性能、技术要求和试验方法等而设计，它是我国推广的节能泵类产品之一。
是长沙中联泵业有限公司科技人员联合国内水泵专家选用国内优秀水力模型设计开发。
供吸送清水及物理化学性质类似水不含固体颗粒的液体。
广泛用于工农业城市排水、消防供水等。
供输送20℃～105℃的腐蚀性介质或物理、化学性能类似于水的介质。
IH80-50-200型单级单吸化工离心泵型号意义： IH80-50-200型单级单吸化工离心泵性能范围： 流量Q：6.3～400m3/h 扬程H：5～132m 转速n：2900、1450r/min 配带功率：0.55～110KW 进口直径：50～200mm 最高工作压力：1.6Mpa IH型化工泵有29个基本型，其中22个双速(2900、1450r/min)经过A、B两种型式的叶轮直径切割变型后，达112个规格。
注：除上表已列出的材料外、生产厂还可根据用户需要，选用适合制造该系列化工泵的材料。
所选材料及其代号应原则符合GB2100-80。
对国家尚未规定代号的材料，允许采用国际或国内通用的材料代号(如行业或工厂标准)。
IH80-50-200型单级单吸化工离心泵产品特点： IH80-50-200型单级单吸化工离心泵具有水利性能布局合理、可靠，体积小，质量轻，抗汽蚀性能好，电耗低，使用检修方便，工作效率高等优点。
IH型单级单吸离心泵为卧式结构，其结构设计基本能满足所有管道安装。
IH80-50-200型单级单吸化工离心泵旋转方向： IH80-50-200型单级单吸化工离心泵通过加长联轴器由电动机直接驱动，从电动机端看，按顺时针方向旋转。
IH80-50-200型单级单吸化工离心泵轴封型式： 填料密封：泵盖内设有填料函，采用软填料密封，填料函内可通入有一定压力的水，供密封冷却，润滑、清洗用。
1111 • © Titan Tool Inc. All Rights Reserved. Form No. 0552844ENOTE: This manual contains importantwarnings and instructions. Please read and retain for reference.Owner’s ManualDo not use this equipment before reading this manual!ADVANTAGE 600Electric Piston PumpModel 0552059Model 0552058Register your product online at:Proper registration will serve as proof of purchase in the event your original receipt becomes misplaced or lost.Serial Number*_ _ _ _ _ _ _ _ _ _* See page 3 for location2 © Titan Tool Inc. All rights reserved.Grounding Instructions© Titan Tool Inc. All rights reserved. 34 © Titan Tool Inc. All rights reserved.© Titan Tool Inc. All rights reserved.56 © Titan Tool Inc. All rights reserved.© Titan Tool Inc. All rights reserved.78 © Titan Tool Inc. All rights reserved.© Titan Tool Inc. All rights reserved.910 © Titan Tool Inc. All rights reserved.© Titan Tool Inc. All rights reserved.11ProblemA. The unit will not run.B. The unit will not prime.C. The unit will not build ormaintain pressure.D. Fluid leakage at the upper endof the fluid section.E. Excessive surge at the spraygun.F. Poor spray pattern.G. The unit lacks power.cause1. The unit is not plugged in.2. Tripped breaker.3. The pressure is set too low (pressurecontrol knob set at minimum setting doesnot supply power to unit).4. Faulty or loose wiring.5. Excessive motor temperature.1. The PRIME/SPRAY valve is in the SPRAYposition.2. Air leak in the siphon tube/suction set.3. The pump filter and/or inlet screen isclogged.4. The siphon tube/suction set is clogged.1. The spray tip is worn.2. The spray tip is too large.3. The pressure control knob is not setproperly.4. The pump filter, gun filter, or inlet screen isclogged.5. Material flows from the return hose whenthe PRIME/SPRAY valve is in the SPRAYposition.6. Air leak in the siphon tube/suction set.7. There is external fluid leak.8. There is an internal fluid section leak(packings are worn and/or dirty, valve ballsare worn).9. Worn valve seats10. Motor powers but fails to rotate1. The upper packings are worn.2. The piston rod is worn.1. Wrong type of airless spray hose.2. The spray tip worn or too large.3. Excessive pressure.1. The spray tip is too large for the materialbeing used.2. Incorrect pressure setting.3. Insufficient fluid delivery.4. The material being sprayed is too viscous.1. The pressure adjustment is too low.2. Improper voltage supply.Solution1. Plug the unit in.2. Reset the breaker.3. Turn the pressure control knob clockwise to supplypower to the unit and increase the pressure setting.4. Inspect or take to a Titan authorized service center.5. Allow motor to cool.1. Rotate the PRIME/SPRAY valve clockwise to thePRIME position.2. Check the siphon tube/suction set connection andtighten or re-tape the connection with PTFE tape.3. Remove the pump filter element and clean. Removethe inlet screen and clean.4. Remove the siphon tube/suction set and clean.1. Replace the spray tip following the instructions thatcame with the spray gun.2. Replace the spray tip with a tip that has a smallerorifice following the instructions that came with thespray gun.3. Turn the pressure control knob clockwise to increasethe pressure setting.4. Remove the pump filter element and clean. Removethe gun filter and clean. Remove the inlet screenand clean.5. Clean or replace the PRIME/SPRAY valve.6. Check the siphon tube/suction set connection andtighten or re-tape the connection with PTFE tape.7. Check for external leaks at all connections. Tightenconnections, if necessary.8. Clean the valves and service the fluid sectionfollowing the “Servicing the Fluid Section” procedurein the Maintenance section of this manual.9. Reverse or replace the valve seats following the“Servicing the Fluid Section” procedure in theMaintenance section of this manual.10. Take unit to a Titan authorized service center.1. Repack the pump following the “Servicing the FluidSection” procedure in the Maintenance section of thismanual.2. Replace the piston rod following the “Servicing theFluid Section” procedure in the Maintenance sectionof this manual.1. Replace hose with a minimum of 50’ of 1/4”grounded textile braid airless paint spray hose.2. Replace the spray tip following the instructions thatcame with the spray gun.3. Rotate the pressure control knob counterclockwise todecrease spray pressure.1. Replace the spray tip with a new or smaller spray tipfollowing the instructions that came with the spraygun.2. Rotate the pressure control knob to adjust thepressure for a proper spray pattern.3. Clean all screens and filters.4. Add solvent to the material according to themanufacturer’s recommendations.1. Rotate the pressure control knob clockwise toincrease the pressure setting.2. Reconnect the input voltage for 120V AC.Troubleshooting12 © Titan Tool Inc. All rights reserved.Notes© Titan Tool Inc. All rights reserved.13Instructions de mise à la terreInstrucciones para conectar a tierra18 © Titan Tool Inc. All rights reserved.Parts ListMain assembly13456213141516175711891012 Item Part # Description quantity 1 0558302 Motor cover ...............................................1 2 9805287 Screw ........................................................4 3 9800308 Screw ........................................................4 4 ---------- Motor assembly ........................................1 5 761-178 Screw (upright cart) ..................................4 756-091 Screw (low boy)6 805-257A Suction set assembly (low boy cart) .........17 ---------- Gear box assembly ...................................18 0558377A Fluid section assembly (upright cart) ........1 0558376A Fluid section assembly (low boy cart)9 0551443 Pail hook (upright cart only) ......................1 ItemPart # Description quantity 10 710-033 Screw (upright cart only) ...........................2 11 763-552 Washer (upright cart only) ........................2 12 0551124 Upright cart assembly ...............................1 13 730-334 Hose clip (upright cart only) ......................1 14 0551556 Return hose (upright cart only) .................1 15 0509543 Siphon tube, long (upright cart only).........1 0551663 Siphon tube, short (upright cart only)16 710-046 Inlet screen (upright cart only) .................1 17 704-117 Screw ........................................................2 18 0327226 Return hose clamp (low boy, not shown) .1 19 704-358 Plug (low boy cart only, not shown) . (2)Motor assembly21345Item Part # Description quantity 1 0551616 Fan ...........................................................1 2 0551599 Front end bell assembly ...........................1 3 705-063 Electronic cover ........................................1 Item Part #Description quantity 4 0551612 Electronic control assembly ......................1 5 0551595 Motor assembly(includes items 1, 2, 4, and 5) (1)NOTE: all electrical work shouldbe performed by a Titan authorized service center.Gear Box assembly20 © Titan Tool Inc. All rights reserved.Item Part # Description quantity1 700-139 Screw (4)2 0558301 Front cover (1)3 0508208 Slider assembly (1)4 0508572 Crankshaft/gear assembly (1)5 704-174 Thrust washer (1)6 704-176 Second stage gear (1)7 700-175 Cap (1)8 700-176 Seal (1)9 700-159 Pressure control knob...............................1Item Part # Description quantity10 806-111 Potentiometer mount (1)11 806-213 Power cord assembly (1)12 9800340 Ground screw (1)13 0551666 Transducer assembly (1)14 0551667 Potentiometer (1)15 9850936 ON/OFF switch (1)16 700-139 Screw (4)17 704-281 Port plug (1)18 0551601 Heat sink assembly (1)upright cart assembly (P/N 0551124)1234 5 6 7121317151416 78 9 10 11Item Part # Description quantity 1 0551679 Handle assembly(includes items 2–5, 12 and 13) (1)2 590-508 Roll pin (2)3 9841504 Snap button (2)4 590-504 Handle sleeve (2)5 590-506 Handle washer (2)6 0278373 Wheel (2)7 0294534 Spacer (4)8 0294635 Plug (2)9 9885571 Plug (2)10 13538 Bumper (2)11 54458 Screw (2)12 856-002 Washer (4)13 856-921 Screw (4)14 0507774 Screw (4)15 0507655 Cord wrap (2)16 0551780 Cart weldment (includes items 8 and 9) (1)17 9890104 Cap (2)Low Boy cart assemblyElectrical Schematic91011121314151617182019123467835 Item Part # Description quantity 1 0551608 Cart weldment (includes items 6 and 14) .1 2 704-291 Roll pin ......................................................2 3 0294534 Wheel spacer ............................................4 4 0270394 Wheel .......................................................2 5 9890104 Cap ...........................................................2 6 806-039 Plug ..........................................................2 7 0295615 Lock nut ....................................................2 8 9805230 Screw ........................................................1 9 773-918 Screw ........................................................2 10 0551551 Mounting bracket, left ...............................1 110551552Mounting bracket, right (1)Item Part # Description quantity 12 856-921 Screw ........................................................4 13 856-002 Washer .....................................................4 14 806-033 Plug ..........................................................2 15 590-506 Handle washer ..........................................2 16 590-508 Roll pin ......................................................2 17 9841504 Snap button ..............................................2 18 590-504 Sleeve .......................................................2 19 0551609 Handle asssembly(includes items 12, 13, and 15–18............1 20700-1041Drip cup (1)NOTE: all electrical work should be performed bya Titan authorized service center.WarrantyTitan Tool, Inc., (“Titan”) warrants that at the time of delivery to the original purchaser for use (“End User”), the equipment covered by this warranty is free from defects in material and workmanship. With the exception of any special, limited, or extended warranty published by Titan, Titan’s obligation under this warranty is limited to replacing or repairing without charge those parts which, to Titan’s reasonable satisfaction, are shown to be defective within twelve (12) months after sale to the End User. This warranty applies only when the unit is installed and operated in accordance with the recommendations and instructions of Titan.This warranty does not apply in the case of damage or wear caused by abrasion, corrosion or misuse, negligence, accident, faulty installation, substitution of non-Titan component parts, or tampering with the unit in a manner to impair normal operation. Defective parts are to be returned to an authorized Titan sales/service outlet. All transportation charges, including return to the factory, if necessary, are to be borne and prepaid by the End User. Repaired or replaced equipment will be returned to the End User transportation prepaid.THERE IS NO OTHER EXPRESS WARRANTY. TITAN HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, TO THE EXTENT PERMITTED BY LAW. THE DURATION OF ANY IMPLIED WARRANTIES WHICH CANNOT BE DISCLAIMED IS LIMITED TO THE TIME PERIOD SPECIFIED IN THE EXPRESS WARRANTY. IN NO CASE SHALL TITAN LIABILITY EXCEED THE AMOUNT OF THE PURCHASE PRICE. LIABILITY FOR CONSEQUENTIAL, INCIDENTAL OR SPECIAL DAMAGES UNDER ANY AND ALL WARRANTIES IS EXCLUDED TO THE EXTENT PERMITTED BY LAW.TITAN MAKES NO WARRANTY AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE WITH RESPECT TO ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT MANUFACTURED BY TITAN. THOSE ITEMS SOLD, BUT NOT MANUFACTURED BY TITAN (SUCH AS GAS ENGINES, SWITCHES, HOSES, ETC.) ARE SUBJECT TO THE WARRANTY, IF ANY, OF THEIR MANUFACTURER. TITAN WILL PROVIDE THE PURCHASER WITH REASONABLE ASSISTANCE IN MAKING ANY CLAIM FOR BREACH OF THESE WARRANTIES.PatentsThese products are covered by one or more of the following U.S. patents:5,848,566 5,769,321 5,725,364 5,671,656 5,435,6975,346,037 D384,676 6,179,222 5,934,883Material Safety Data Sheets (MSDS) are available on Titan’s website or by calling Customer Service.United States Sales & Service1770 Fernbrook Lane Minneapolis, MN 55447 200 Trowers Road, Unit 7B Woodbridge, Ontario L4L 5Z8Phone: Fax:1-800-526-53621-800-528-4826Phone:Fax:1-800-565-86651-800-856-8496Canadian Branch1770 Fernbrook LaneMinneapolis, MN 55447Phone:Fax:1-201-337-12401-201-405-7449International。
文件编号：SMH-JD-SB-2012-022 设备密封管理规定文件会签表目录No table of contents entries found.1 目的为了规范公司设备密封管理，降低装置泄漏，减少污染，确保运行安全，进一步提高现场设备管理水平，结合公司实际情况，制定本规定。
2 适用范围本规定规定了设备密封管理统计计算、检验标准及管理方法和程序；本规定适用于公司生产和生活区设备密封管理。
3 编制依据美国石油协会API682第二版（2002年）机械密封标准，机械密封设计制造、选型和操作运行方面的依据。
4 术语和定义动密封：各种机电设备连续运动(旋转和往复) 的两个偶合件之间的密封属于动密封。
静密封：设备及其附属管线和附件，在运动过程中，两个没有相对运动的偶合件之间的密封属于静密封。
机械密封：是靠一对或数对垂直于轴作相对滑动的端面在流体压力和补偿机构的弹力(或磁力)作用下保持贴合并配以辅助密封而达到阻漏的轴封装置。
5 组织与职责5.1 机动部5.1.1 负责审核各类设备密封管理的台账、报表及有关资料。
5.1.2 负责组织创建公司“无泄漏”活动。
5.1.3 定期组织密封管理工作的检查，考核、总结工作。
5.1.4 审查关键部位密封点的检修方案，并组织参与检修后的验收。
5.1.5 推广《无渗漏管理评价办法》，组织考评。
5.1.6 针对机械密封管理：5.1.6.1负责对各车间机械密封的使用管理进行监督，对机械密封的使用管理情况进行检查和考核；5.1.6.2 负责机械密封新技术的推广和技术攻关。
5.2 各生产车间5.2.1 负责对辖区范围内设备的密封点进行清理、登记、建立密封点台账。
5.2.2 负责本车间密封点计划的编制、上报以及密封点的日常检查与处理。
5.2.3 负责本车间每月密封点泄漏率的统计。
5.2.4 负责对辖区范围内密封点的检修工作。
5.2.5 针对机械密封管理：5.2.5.1 负责机械密封的选型、质量验收、安装、维护和修复工作；5.2.5.2 严格把好机械密封选型关和审核关，确保选型适用；5.2.5.3 组织技术培训和技术攻关，提高机械密封的使用可靠性；5.3 综合办公室后勤科负责生活区的密封管理。
产品说明泵型号叶轮形式泵额定转速n=2950r/min 泵额定转速n=1470r/min流量Q(m3/h) 扬程H(m)电机功率流量Q(m3/h扬程H(m)电机功率比重1.00比重1.25比重1.84比重1.00比重1.25比重1.84SZE25-200 A 11.5 48 5.5 7.5 11 5.5 12 1.1 1.1 1.5B 10.5 44 4 5.5 7.5 5 11 1.1 1.1 1.5C 9 36 3 4 5.5 4.5 9 1.1 1.1 1.1D 7.5 28 2.2 3 4 4 6.5 1.1 1.1 1.1SZE25-250 E 5.5 16 1.5 1.5 2.2 3 4 1.1 1.1 1.1A 11 75 11 15 18.5 8 17 2.2 3 4B 10.5 68 11 11 15 7.5 16 2.2 3 4C 10 48 7.5 11 15 7 11 2.2 2.2 3D 9.5 30 5.5 7.5 11 6.5 6.5 1.1 1.5 2.2SZE25-315 A 18 130 30 37 55 10 31 4 5.5 7.5B 17.5 115 30 30 45 9 30 4 5.5 7.5C 16 102 22 30 45 8 26 4 5.5 7.5D 15 90 18.5 22 37 7.5 22 3 4 5.5E 14 80 15 18.5 30 7 20 3 4 5.5F 13 65 15 15 22 6.5 16 2.2 3 4A 22 34 5.5 15 11 11 8.5 1.1 1.1 1.5B 18 28 3 5.5 7.5 10 8 1.1 1.1 1.5C 15 21 2.2 3 4 9 7 1.1 1.1 1.1SZE32-160D 12 14 1.5 2.2 3 7.5 5 1.1 1.1 1.1E 6 3.5 1.1 1.1 1.1SZE32-200 A 18 54 7.5 11 15 9.5 13 1.1 1.5 2.2B 17 50 7.5 11 11 9 12 1.1 1.5 1.5C 16 40 5.5 7.5 11 8 10 1.1 1.1 1.5D 14 32 4 5.5 7.5 7.5 8 1.1 1.1 1.1SZE32-250 A 21 80 15 22 30 10.5 20 2.2 3 4B 20 75 15 18.5 30 40 19 2.2 3 4C 18 65 11 15 22 8.5 16 2.2 2.2 3D 15 48 7.5 11 15 7 12 1.1 1.5 2.2SZE40-160 A 29 32 5.5 7.5 11 14.5 8.5 1.1 1.1 1.5B 27 30 5.5 7.5 11 13 8 1.1 1.1 1.5C 26 26 4 5.5 7.5 12 7 1.1 1.1 1.1D 20 20 3 4 5.5 9 5 1.1 1.1 1.1SZE40-200 A 32 50 11 15 18.5 16.5 12.5 1.5 2.2 3B 30 47 11 15 18.5 15 12 1.1 1.5 2.2C 25 38 7.5 11 15 13.5 9.5 1.1 1.5 2.2D 20 31 5.5 7.5 11 12 7 1.1 1.1 1.5SZE40-250 A 31 77 18.5 22 30 15.5 19 3 3 4B 30 73 15 22 30 15 17 2.2 3 4C 24 60 11 15 18.5 12.5 14 1.5 2.2 3D 18 50 7.5 11 15 11 11 1.1 1.5 2.2SZE40-315 A 41 110 37 45 75 21 28 5.5 7.5 11B 40 105 30 45 55 20 26 5.5 7.5 11C 36 80 22 30 45 17 20 4 5.5 7.5D 30 60 15 22 30 15 15 2.2 3 5.5 SZE50-160A 56 32 11 15 18.5 28 8 1.5 2.2 2.2B 52 30 7.5 11 15 26 7.5 1.1 1.5 2.2C 46 26 7.5 11 11 24 6.5 1.1 1.5 2.2D 40 18 4 5.5 75 16 5 1.1 1.1 1.1SZE50-200 A 65 54 18.5 36 13.5 3 4 5.5B 60 52 15 22 32 12.5 2.2 3 4C 50 42 11 15 22 8 10 1.5 2.2 3D 40 32 7.5 11 15 22 8 1.1 1.5 2.2SZE50-250 A 70 80 30 45 55 34 20 4 5.5 7.5B 65 75 30 37 45 32 18 4 5.5 7.5C 60 60 22 30 37 30 15 3 4 5.5D 50 45 15 18.5 30 26 11 2.2 3 4SZE50-315 A 85 110 55 75 110 42 27 7.5 11 15B 80 100 45 75 90 40 24 7.5 11 15泵型号叶轮形式泵额定转速泵额定转速流量Q（m3/h）扬程H（m）电机功率流量Q（m3/h）扬程H（m）电机功率比重1.00比重1.25比重1.84比重1.00比重1.25比重1.84SZE50-315C 65 80 30 45 55 35 19 5.5 7.5 11D 55 60 30 30 45 28 15 3 4 5.5SZE50-400 A 80 190 110 160 200 40 48 15 22 30B 75 180 90 132 160 38 44 15 18.5 30C 70 140 75 90 132 35 35 11 15 18.5D 60 100 45 75 90 30 25 7.5 11 15SZE80-160 A 90 32 15 1805 30 46 8 2.2 3 4B 85 280 11 15 2 42 7 1.5 2.2 3C 75 23 11 11 15 34 6 1.5 2.2 2.2D 65 17 5.5 7.5 11 32 4.5 1.1 1.1 1.5SZE80-200 A 100 53 30 37 45 50 13 4 5.5 7.5B 95 48 22 30 37 46 12 3 4 5.5C 80 39 15 30 40 9.5 2.2 3 4D 70 30 11 15 22 36 7.5 1.5 2.2 3SZE80-250 A 125 80 45 75 90 62 20 7.5 11 15B 115 75 37 55 75 60 19 7.5 11 11C 100 60 30 37 55 55 14 4 5.5 7.5D 75 50 22 30 37 46 11 3 4 5.5SZE80-315 A 140 125 90 70 32 15 18 22B 135 120 75 65 30 11 15 22C 115 97 55 75 55 25 11 11 15D 85 75 37 45 75 45 18 5.5 7.5 11SZE80-400 A 165 180 160 200 85 46 22 30 45B 160 170 160 200 80 42 22 30 37C 135 130 110 132 200 65 34 15 18.5 30D 110 100 75 90 132 50 26 11 15 18.5SZE100-160 A 160 28 18.5 30 37 80 7 3 4 5.5B 150 24 15 22 30 75 6 2.2 3 4C 130 18 11 15 22 60 4.5 1.5 2.2 3D 110 12 7.5 11 15 55 3 1.1 1.5 2.2SZE100-200A 190 48 37 55 75 95 12 5.5 7.5 11B 180 44 37 45 75 85 11 5.5 7.5 11C 160 34 30 37 45 75 9 4 5.5 7.5D 130 26 18.5 30 37 65 6.5 3 3 4SZE100-250 A 230 77 75 90 115 19 11 15 18.5B 210 75 75 90 110 18 11 15 18.5C 190 58 45 75 90 100 14 7.5 11 15D 170 45 37 45 75 90 10 85.5 7.5 7.5SZE100-315 A 250 125 132 300 130 31 18.5 30 37B 240 120 132 160 115 31 18.515 22 30C 210 95 90 110 160 110 23 11 18.5 30D 170 72 75 75 110 80 18 37 11 15SZE100-400 A 300 190 250 355 150 47 30 45 75B 280 185 220 220 140 46 30 45 75C 240 150 160 160 315 120 36 15 37 45D 200 110 110 200 100 28 75 22 30SZE100-500 A 180 73 55 90 110B 167 68 37 75 110C 142 53 30 55 75D 120 42 7.5 37 55SZE150-200 A 320 43 55 75 160 10.5 7.5 11 15B 300 38 45 75 90 150 9.5 5.5 11 15C 260 30 37 45 45 140 7 3 7.5 11D 240 20 30 37 45 120 5 2 4 5.5SZE150-250A 400 70 110 160 200 200 18 18.5 22 30B 350 60 90 110 160 180 15 15 18.5 22泵型号叶轮形式泵额定转速n=2950r/min 泵额定转速n=1470r/min流量扬程电机功率流量扬程电机功率Q(m3/h) Hm 比重1.00 比重1.25比重1.84Q（m3/h）Hm 比重1.00比重1.25比重1.84SZE150-250 C 320 45 75 90 110 160 13 11 15 18.5SZE150-315 A 450 125 220 220 32 30 45 55B 430 120 200 200 30 30 37 110C 360 95 160 200 170 24 22 30 90D 300 70 90 132 160 150 17 15 18.5 75SZE150-400 A 508 200 255 49 55 75 55B 495 190 248 48 55 75C 440 153 280 220 39 37 55D 390 115 200 250 355 195 29 30 37SZE150-500 A 290 75 90B 283 72 90C 232 59 75 90 110D 208 44 45 75 90SZE150-560 A 320 102 160B 315 97 132C 255 81 90 132 160D 195 63 75 90 110SZE150-630 A 347 110B 338 105C 280 81 132 160D 220 60 90 110 160SZE200-240 A 300 17 22 30 45B 290 16 22 30 37C 260 12 15 18.5 30D 230 8.5 11 15 18.5SZE200-315 A 350 30 45 55 75B 340 29 37 55 75C 290 23 30 37 55D 420 16 18.5 22 30SZE200-400 A 410 50 90 110 160B 370 47 75 110 132C 332 36.5 55 75 110D 485 27 45 55 75SZE200-, 500 A 470 82 160B 400 78 160C 330 63 110 160D 525 48 75 90 132SZE200-560 A 510 101 220 280B 430 98 200 280C 350 81 160 200 280D 560 62 110 132 200SZE200-630 A 550 128 315B 460 125 280C 372 101 200 280 355D 540 75 132 200 250SZE250-315 A 528 26.5 55 75 110B 480 25 55 75 90C 434 19 37 55 75D 650 13 30 37 45SZE250-400 A 630 49 132 160B 565 46 110 160C 500 36 75 110 160D 800 24 55 75 90 SZE250-500A 770 80 250 315B 770 76 220 315泵型号叶轮形式泵额定转速泵额定转速流量Q(m3/h)扬程H(m)电机功率流量Q(m3/h)扬程H(m)电机功率比重1.00比重1.25比重1.84比重1.00比重1.25比重1.84SZE250-500C 700 58 160 220 280D 630 42 110 160 200SZE250-560 A 850 105B 830 98 315C 760 78 250 315D 665 57 160 220 280SZE250-630 A 855 128B 816 119C 720 96D 625 71SZE300-315 A 950 21 75 110 160B 900 20 75 90 132C 800 16 55 75 110SZE300-400 A 1030 47B 1000 45 160C 900 34 132 160D 780 26 90 132 160SZE300-500 A 1200 77 355B 1170 75 315C 1015 57 220 315D 870 42 160 200 280SZE300-560 A 1340 104B 1280 97C 1140 77D 950 56SZE300-630 A 1450 132B 1375 125C 1170 100D 950 75SZE350-400 A 1600 38B 1450 32C 1300 26D 1250 22SZE350-500 A 1870 74B 1520 70C 1300 52D 2040 38SZE350-500 A 1950 98B 1760 91C 1500 74D 2390 54SZE350-630 A 2280 125B 1960 117C 1610 95D 1610 70产品说明泵型号叶轮形式泵额定转速n=2950r/min 泵额定转速n=1470r/min流量Q(m3/h)扬程H(m)电机功率流量Q(m3/h扬程H(m)电机功率比重1.0比重1.25比重1.84比重1.0比重1.25比重1.84SZE25-200 A 11.5 48 5.5 7.5 11 5.5 12 1.1 1.1 1.5B 10.5 44 4 5.5 7.5 5 11 1.1 1.1 1.5C 9 36 3 4 5.5 4.5 9 1.1 1.1 1.1D 7.5 28 2.2 3 4 4 6.5 1.1 1.1 1.1SZE25-250 E 5.5 16 1.5 1.5 2.2 3 4 1.1 1.1 1.1A 11 75 11 1518.58 17 2.2 3 4B 10.5 68 11 11 15 7.5 16 2.2 3 4C 10 48 7.5 11 15 7 11 2.2 2.2 3D 9.5 30 5.5 7.5 11 6.5 6.5 1.1 1.5 2.2SZE25-315 A 18 130 30 37 55 10 31 4 5.5 7.5B 17.5 115 30 30 45 9 30 4 5.5 7.5C 16 102 22 30 45 8 26 4 5.5 7.5D 15 9018.522 37 7.5 22 3 4 5.5E 14 80 1518.530 7 20 3 4 5.5F 13 65 15 15 22 6.5 16 2.2 3 4 A 22 34 5.5 15 11 11 8.5 1.1 1.1 1.5SZE32-160 B 18 28 3 5.5 7.5 10 8 1.1 1.1 1.5C 15 21 2.2 3 4 9 7 1.1 1.1 1.1D 12 14 1.5 2.2 3 7.5 5 1.1 1.1 1.1E 6 3.5 1.1 1.1 1.1SZE32-200 A 18 54 7.5 11 15 9.5 13 1.1 1.5 2.2B 17 50 7.5 11 11 9 12 1.1 1.5 1.5C 16 40 5.5 7.5 11 8 10 1.1 1.1 1.5D 14 32 4 5.5 7.5 7.5 8 1.1 1.1 1.1SZE32-250 A 21 80 15 22 30 10.5 20 2.2 3 4B 20 75 1518.530 40 19 2.2 3 4C 18 65 11 15 22 8.5 16 2.2 2.2 3D 15 48 7.5 11 15 7 12 1.1 1.5 2.2SZE40-160 A 29 32 5.5 7.5 11 14.5 8.5 1.1 1.1 1.5B 27 30 5.5 7.5 11 13 8 1.1 1.1 1.5C 26 26 4 5.5 7.5 12 7 1.1 1.1 1.1D 20 20 3 4 5.5 9 5 1.1 1.1 1.1SZE40-200 A 32 50 11 1518.516.512.51.52.2 3B 30 47 11 1518.515 12 1.1 1.5 2.2C 25 38 7.5 11 15 13.5 9.5 1.1 1.5 2.2D 20 31 5.5 7.5 11 12 7 1.1 1.1 1.5A 31 7718.522 30 15.5 19 3 3 4B 30 73 15 22 30 15 17 2.2 3 4SZE40-250 C 24 60 11 1518.512.5 14 1.5 2.2 3D 18 50 7.5 11 15 11 11 1.1 1.5 2.2SZE40-315 A 41 110 37 45 75 21 28 5.5 7.5 11B 40 105 30 45 55 20 26 5.5 7.5 11C 36 80 22 30 45 17 20 4 5.5 7.5D 30 60 15 22 30 15 15 2.2 3 5.5SZE50-160 A 56 32 11 1518.528 8 1.5 2.2 2.2B 52 30 7.5 11 15 26 7.5 1.1 1.5 2.2C 46 26 7.5 11 11 24 6.5 1.1 1.5 2.2D 40 18 4 5.5 75 16 5 1.1 1.1 1.1SZE50-200 A 65 5418.53613.53 4 5.5B 60 52 15 22 3212.52.2 3 4C 50 42 11 15 22 8 10 1.5 2.2 3D 40 32 7.5 11 15 22 8 1.1 1.5 2.2SZE50-250 A 70 80 30 45 55 34 20 4 5.5 7.5B 65 75 30 37 45 32 18 4 5.5 7.5C 60 60 22 30 37 30 15 3 4 5.5D 50 45 1518.530 26 11 2.2 3 4SZE50-315 A 85 110 55 75 110 42 27 7.5 11 15B 80 100 45 75 90 40 24 7.5 11 15泵型号叶轮形式泵额定转速泵额定转速流量Q（m3/h）扬程H（m）电机功率流量Q（m3/h）扬程H（m）电机功率比重1.0比重1.2比重1.8比重1.00比重1.2比重1.80 5 4 5 4SZE50-315 C 65 80 30 45 55 35 19 5.5 7.5 11D 55 60 30 30 45 28 15 3 4 5.5SZE50-400 A 80 190 110 160 200 40 48 15 22 30B 75 180 90 132 160 38 44 1518.530C 70 140 75 90 132 35 35 11 1518.5 D 60 100 45 75 90 30 25 7.5 11 15SZE80-160 A 90 32 15180530 46 8 2.2 3 4B 85 280 11 15 2 42 7 1.5 2.2 3C 75 23 11 11 15 34 6 1.5 2.2 2.2D 65 17 5.5 7.5 11 32 4.5 1.1 1.1 1.5SZE80-200 A 100 53 30 37 45 50 13 4 5.5 7.5B 95 48 22 30 37 46 12 3 4 5.5C 80 39 15 30 40 9.5 2.2 3 4D 70 30 11 15 22 36 7.5 1.5 2.2 3SZE80-250 A 125 80 45 75 90 62 20 7.5 11 15B 115 75 37 55 75 60 19 7.5 11 11C 100 60 30 37 55 55 14 4 5.5 7.5D 75 50 22 30 37 46 11 3 4 5.5SZE80-315 A 140 125 90 70 32 15 18 22B 135 120 75 65 30 11 15 22C 115 97 55 75 55 25 11 11 15D 85 75 37 45 75 45 18 5.5 7.5 11SZE80-400 A 165 180 160 200 85 46 22 30 45B 160 170 160 200 80 42 22 30 37C 135 130 110 132 200 65 34 1518.530D 110 100 75 90 132 50 26 11 15 18. 5SZE100-160 A 160 2818.530 37 80 7 3 4 5.5B 150 24 15 22 30 75 6 2.2 3 4C 130 18 11 15 22 60 4.5 1.5 2.2 3D 110 12 7.5 11 15 55 3 1.1 1.5 2.2SZE100-200 A 190 48 37 55 75 95 12 5.5 7.5 11B 180 44 37 45 75 85 11 5.5 7.5 11C 160 34 30 37 45 75 9 4 5.5 7.5D 130 2618.530 37 65 6.5 3 3 4SZE100-250 A 230 77 75 90 115 19 11 1518.5B 210 75 75 90 110 18 11 1518.5C 190 58 45 75 90 100 14 7.5 11 15D 170 45 37 45 75 90 10 85.5 7.5 7.5SZE100-315 A 250 125 132 300 130 31 18.5 30 37B 240 120 132 160 115 3118.51522 30C 210 95 90 110 160 110 23 1118.530D 170 72 75 75 110 80 18 37 11 15SZE100-400 A 300 190 250 355 150 47 30 45 75B 280 185 220 220 140 46 30 45 75C 240 150 160 160 315 120 36 15 37 45D 200 110 110 200 100 28 75 22 30SZE100-500 A 180 73 55 90 110B 167 68 37 75 110C 142 53 30 55 75D 120 42 7.5 37 55SZE150-200 A 320 43 55 75 160 10.5 7.5 11 15B 300 38 45 75 90 150 9.5 5.5 11 15C 260 30 37 45 45 140 7 3 7.5 11D 240 20 30 37 45 120 5 2 4 5.5SZE150-250 A 400 70 110 160 200 200 18 18.5 22 30B 350 60 90 110 160 180 15 1518.522泵型号叶轮形式泵额定转速n=2950r/min 泵额定转速n=1470r/min流量Q(m3/h)扬程Hm电机功率流量Q（m3/h）扬程Hm电机功率比重1.0比重1.25比重1.84比重1.0比重1.25比重1.84SZE150-250 C 320 45 75 90 110 160 13 11 1518.5SZE150-315 A 450125220 220 32 30 45 55 B 43012200 200 30 30 37 110C 360 95 160 200 170 24 22 30 90D 300 70 90 132 160 150 17 1518.575SZE150-400 A 50820255 49 55 75 55 B 49519248 48 55 75C 440153280 220 39 37 55D 390115200 250 355 195 29 30 37SZE150-50 A 290 75 900 B 283 72 90C 232 59 75 90 110D 208 44 45 75 90SZE150-560 A 320 102 160B 315 97 132C 255 81 90 132 160D 195 63 75 90 110SZE150-630 A 347 110B 338 105C 280 81 132 160D 220 60 90 110 160SZE200-240 A 300 17 22 30 45B 290 16 22 30 37C 260 12 1518.530D 230 8.5 11 1518.5SZE200-315 A 350 30 45 55 75B 340 29 37 55 75C 290 23 30 37 55D 420 1618.522 30SZE200-400 A 410 50 90 110 160B 370 47 75 110 132C 33236.555 75 110D 485 27 45 55 75SZE200-,500 A 470 82 160B 400 78 160C 330 63 110 160D 525 48 75 90 132SZE200-560 A 510 101 220 280B 430 98 200 280C 350 81 160 200 280D 560 62 110 132 200SZE200-630 A 550 128 315B 460 125 280C 372 101 200 280 355D 540 75 132 200 250SZE250-315 A 52826.555 75 110B 480 25 55 75 90C 434 19 37 55 75D 650 13 30 37 45SZE250-400 A 630 49 132 160B 565 46 110 160C 500 36 75 110 160D 800 24 55 75 90SZE250-500 A 770 80 250 315B 770 76 220 315泵型号叶轮形式泵额定转速泵额定转速流量Q(m3/h)扬程H(m)电机功率流量Q(m3/h)扬程H(m)电机功率比重1.0比重1.25比重1.84比重1.0比重1.25比重1.84SZE250-500 C 700 58 160 220 280D 630 42 110 160 200SZE250-56 A 850 1050 B 830 98 315C 760 78 250 315D 665 57 160 220 280SZE250-630 A 855 128B 816 119C 720 96D 625 71SZE300-315 A 950 21 75 110 160B 900 20 75 90 132C 800 16 55 75 110SZE300-400 A 1030 47B 1000 45 160C 900 34 132 160D 780 26 90 132 160SZE300-500 A 1200 77 355B 1170 75 315C 1015 57 220 315D 870 42 160 200 280SZE300-560 A 1340 104B 1280 97C 1140 77D 950 56SZE300-630 A 1450 132B 1375 125C 1170 100D 950 75SZE350-400 A 1600 38B 1450 32C 1300 26D 1250 22SZE350-500 A 1870 74B 1520 70C 1300 52D 2040 38SZE350-500 A 1950 98B 1760 91C 1500 74D 2390 54SZE350-630 A 2280 125B 1960 117C 1610 95D 1610 70泵型号叶轮形式泵额定转速n=2950r/min 泵额定转速n=1470r/min流量Q(m3/h)扬程H(m)电机功率流量Q(m3/h扬程H(m)电机功率比重1.0比重1.25比重1.84比重1.0比重1.25比重1.84SZE25-200 A 11.5 48 5.5 7.5 11 5.5 12 1.1 1.1 1.5B 10.5 44 4 5.5 7.5 5 11 1.1 1.1 1.5C 9 36 3 4 5.5 4.5 9 1.1 1.1 1.1D 7.5 28 2.2 3 4 4 6.5 1.1 1.1 1.1SZE25-250 E 5.5 16 1.5 1.5 2.2 3 4 1.1 1.1 1.1A 11 75 11 1518.58 17 2.2 3 4B 10.5 68 11 11 15 7.5 16 2.2 3 4C 10 48 7.5 11 15 7 11 2.2 2.2 3D 9.5 30 5.5 7.5 11 6.5 6.5 1.1 1.5 2.2SZE25-315 A 18 130 30 37 55 10 31 4 5.5 7.5B 17.5 115 30 30 45 9 30 4 5.5 7.5C 16 102 22 30 45 8 26 4 5.5 7.5D 15 9018.522 37 7.5 22 3 4 5.5E 14 80 1518.530 7 20 3 4 5.5F 13 65 15 15 22 6.5 16 2.2 3 4SZE32-160 A 22 34 5.5 15 11 11 8.5 1.1 1.1 1.5B 18 28 3 5.5 7.5 10 8 1.1 1.1 1.5D 12 14 1.5 2.2 3 7.5 5 1.1 1.1 1.1E 6 3.5 1.1 1.1 1.1SZE32-200 A 18 54 7.5 11 15 9.5 13 1.1 1.5 2.2B 17 50 7.5 11 11 9 12 1.1 1.5 1.5C 16 40 5.5 7.5 11 8 10 1.1 1.1 1.5D 14 32 4 5.5 7.5 7.5 8 1.1 1.1 1.1SZE32-250 A 21 80 15 22 30 10.5 20 2.2 3 4B 20 75 1518.530 40 19 2.2 3 4C 18 65 11 15 22 8.5 16 2.2 2.2 3D 15 48 7.5 11 15 7 12 1.1 1.5 2.2SZE40-160 A 29 32 5.5 7.5 11 14.5 8.5 1.1 1.1 1.5B 27 30 5.5 7.5 11 13 8 1.1 1.1 1.5C 26 26 4 5.5 7.5 12 7 1.1 1.1 1.1D 20 20 3 4 5.5 9 5 1.1 1.1 1.1SZE40-200 A 32 50 11 1518.516.512.51.52.2 3B 30 47 11 1518.515 12 1.1 1.5 2.2C 25 38 7.5 11 15 13.5 9.5 1.1 1.5 2.2D 20 31 5.5 7.5 11 12 7 1.1 1.1 1.5SZE40-250 A 31 7718.522 30 15.5 19 3 3 4B 30 73 15 22 30 15 17 2.2 3 4C 24 60 11 1518.512.5 14 1.5 2.2 3D 18 50 7.5 11 15 11 11 1.1 1.5 2.2SZE40-315 A 41 110 37 45 75 21 28 5.5 7.5 11B 40 105 30 45 55 20 26 5.5 7.5 11C 36 80 22 30 45 17 20 4 5.5 7.5SZE50-160 A 56 32 11 1518.528 8 1.5 2.2 2.2B 52 30 7.5 11 15 26 7.5 1.1 1.5 2.2C 46 26 7.5 11 11 24 6.5 1.1 1.5 2.2D 40 18 4 5.5 75 16 5 1.1 1.1 1.1SZE50-200 A 65 5418.53613.53 4 5.5B 60 52 15 22 3212.52.2 3 4C 50 42 11 15 22 8 10 1.5 2.2 3D 40 32 7.5 11 15 22 8 1.1 1.5 2.2SZE50-250 A 70 80 30 45 55 34 20 4 5.5 7.5B 65 75 30 37 45 32 18 4 5.5 7.5C 60 60 22 30 37 30 15 3 4 5.5D 50 45 1518.530 26 11 2.2 3 4SZE50-315 A 85 110 55 75 110 42 27 7.5 11 15B 80 100 45 75 90 40 24 7.5 11 15泵型号叶轮形式泵额定转速泵额定转速流量Q（m3/h）扬程H（m）电机功率流量Q（m3/h）扬程H（m）电机功率比重1.0比重1.25比重1.84比重1.00比重1.25比重1.84SZE50-315 C 65 80 30 45 55 35 19 5.5 7.5 11D 55 60 30 30 45 28 15 3 4 5.5SZE50-400 A 80 190 110 160 200 40 48 15 22 30B 75 180 90 132 160 38 44 1518.530C 70 140 75 90 132 35 35 11 15 18. 5D 60 100 45 75 90 30 25 7.5 11 15SZE80-160 A 90 32 15180530 46 8 2.2 3 4B 85 280 11 15 2 42 7 1.5 2.2 3C 75 23 11 11 15 34 6 1.5 2.2 2.2D 65 17 5.5 7.5 11 32 4.5 1.1 1.1 1.5SZE80-200 A 100 53 30 37 45 50 13 4 5.5 7.5B 95 48 22 30 37 46 12 3 4 5.5C 80 39 15 22 30 40 9.5 2.2 3 4D 70 30 11 15 22 36 7.5 1.5 2.2 3SZE80-250 A 125 80 45 75 90 62 20 7.5 11 15B 115 75 37 55 75 60 19 7.5 11 11C 100 60 30 37 55 55 14 4 5.5 7.5D 75 50 22 30 37 46 11 3 4 5.5SZE80-315 A 140 125 90 70 32 15 18 22B 135 120 75 65 30 11 15 22C 115 97 55 75 55 25 11 11 15D 85 75 37 45 75 45 18 5.5 7.5 11SZE80-400 A 165 180 160 200 85 46 22 30 45B 160 170 160 200 80 42 22 30 37C 135 130 110 132 200 65 34 1518.530D 110 100 75 90 132 50 26 11 1518.5SZE100-160 A 160 2818.530 37 80 7 3 4 5.5B 150 24 15 22 30 75 6 2.2 3 4C 130 18 11 15 22 60 4.5 1.5 2.2 3D 110 12 7.5 11 15 55 3 1.1 1.5 2.2。
