UC Start Kit 3 - 随身电话系统
- 格式:pdf
- 大小:2.41 MB
- 文档页数:39
Discover-MO:) 系列产品之STM32F4DISCOVERY扩展板DM-STF4BB用户手册深圳市英蓓特科技有限公司DM-STF4BB扩展板♦基于ST原厂评估套件STM32F4DISCOVERY的扩展板。
♦支持3.5寸工业级LCD触摸屏,4线触摸模块。
♦支持130万像素OV9655 Camera模块。
♦1路10/100M以太网接口。
♦1路3线RS232电平接口(DB9公头接口)。
♦5路3线TTL电平UART,通过排针引出。
♦支持uC/OS-Ⅱ_v2.86 & uC/GUI_v3.90a,并提供BSP源码(如用于商业,需申请授权)♦支持FatFs_vR0.08a 文件系统(用于SD卡的文件系统)♦支持LwIP_v1.3.2协议栈版权◆Discover-MO:) , DM-STF4BB, Devkit407由深圳英蓓特科技有限公司授权。
◆STM32F407, STM32F4DISCOVERY由意法半导体(ST)授权。
◆Microsoft,MS-DOS,Microsoft Windows XP 由微软授权。
重要申明Embest拥有对该文档的所有权和使用权。
本文档上的信息受版权保护。
除非经特别许可,否则未事先经过Embest的书面许可,不得以任何方式和形式来修改、分发和复制本文档的任何部分。
版本更新记录:版本日期描述V1.0 2012-08-15 初始版本联系我们:如果您想订购英蓓特的DM-STF4BB或其他产品,请与市场部联系:电话:*************/25631357/25635656传真:*************邮箱:****************如果您想获得英蓓特的技术支持,请与技术支持联系:电话:*************邮箱:*****************网址:地址:深圳市罗湖区太宁路85号罗湖科技大厦405室目录DM-STF4BB扩展板 (2)1概述 (9)1.1 产品简介 (9)1.2 产品构成 (9)1.3 产品示意图 (10)1.4 应用领域 (12)1.5 系统结构框图 (12)1.6 产品硬件特性 (14)1.7 产品软件特性 (15)2硬件系统 (17)2.1 CPU (17)2.2 硬件接口 (18)2.2.1 RS232串行接口 (18)2.2.2 Ethernet接口 (18)2.2.3 Micro SD卡接口 (19)2.2.4 LCD接口 (19)2.2.5 扩展接口 (21)2.2.6 Camera接口 (22)2.3 引脚复用 (24)2.4 硬件尺寸 (27)3搭建开发环境 (28)3.1 硬件环境 (28)3.2 软件环境 (28)3.3 PC机环境配置 (29)3.3.1 超级终端配置 (29)3.3.2 网络配置 (32)4基本外设例程 (35)4.1 USART实验 (35)4.2.1 FatFs例程 (36)4.2.2 uSDCard例程 (37)4.3 LCD实验 (38)4.3.1 LCD_35T例程 (38)4.3.2 LCD_Touch例程 (39)4.4 DCMI实验 (40)4.5 Ethernet实验 (41)4.5.1 Standalone/httpserver例程 (41)4.5.2 Standalone/tcp_echo_client例程 (44)4.5.3 Standalone/tcp_echo_server例程 (47)4.5.4 Standalone/udp_echo_client例程 (49)4.5.5 Standalone/udp_echo_server例程 (51)4.5.6 FreeRTOS/httpserver_netconn例程 (54)4.5.7 FreeRTOS/httpserver_socket例程 (56)4.5.8 FreeRTOS/udptcp_echo_server_netconn例程 (56)4.6 USB实验 (57)4.6.1 USB_Device_Examples/DFU例程 (58)4.6.2 USB_Device_Examples/MSC例程 (61)4.6.3 USB_Device_Examples/VCP例程 (62)4.6.4 USB_Host_Examples/HID例程 (67)4.6.5 USB_Host_Examples MSC例程 (69)5扩展例程 (73)5.1 STM32F4xx-uCOS-II (73)5.2 STM32F4xx-uCOSII-uCGUI (73)5.3 STM32F4xx_FPU_fft_example (74)6功能测试 (75)6.1 USART测试 (75)6.2 SDIO测试 (75)6.4 DCMI测试 (75)6.5 Ethernet测试 (75)6.6 USB测试 (75)7产品清单 (76)8技术支持与保修 (77)8.1 技术支持服务 (77)8.2 保修服务条款 (77)8.3 液晶屏幕基本使用保养知识 (78)8.4 增值服务 (78)1 概述1.1 产品简介DM-STF4BB是深圳市英蓓特科技有限公司推出的一款基于STM32F4DISCOVERY的扩展板,它将联合STM32F4DISCOVERY一起组成Embest的Devkit407评估板。
前言 (5)前言 (5)翻车警告 (5)重要声明 (6)用户手册使用须知 (6)警告及注意事项 (7)车辆识别号码 (7)车辆改装/变动 (8)启动汽车前的注意事项 (8)汽车钥匙简述 (8)取下点火钥匙 (8)用钥匙锁车门 (9)钥匙未取出提醒装置 (9)方向盘锁——如果配备 (10)手动锁止方向盘 (10)解锁方向盘锁——如果配备 (10)SENTRY KEY® (10)更换钥匙 (10)客户钥匙编程 (11)概述 (11)车辆安全警报——如果配备 (11)启用警报系统 (11)系统重新启用警报 (11)解除警报系统 (11)车辆安全警报手动超控 (12)高级车辆安全警报-—如果配备 (12)启用警报系统 (12)解除警报系统 (12)车辆安全警报手动超控 (12)遥控无钥匙进入(RKE)发射器 (13)解锁车门和尾门 (13)首次按下遥控钥匙解锁驾驶员车门/所有车门 (13)迎宾照明——如果配备 (13)锁止车门和尾门 (14)用遥控钥匙锁止/解锁时信号灯闪烁 (14)更换电池 (14)概述 (15)车门锁 (15)手动门锁 (15)电动门锁 (16)车门自动锁止—-如果配备 (16)车门自动锁止编程 (16)下车自动解锁车门 (17)下车自动解锁车门编程 (17)启用或禁用儿童安全门锁系统 (17)电动车窗—-如果配备 (19)电动车窗开关 (19)自动下降 (19)车窗锁定开关 (19)尾门 (20)乘员防护系统 (21)重要安全措施 (21)座椅安全带系统 (22)增强型座椅安全带使用提醒系统(BeltAlert) (22)胯/肩式安全带 (22)胯/肩式安全带操作说明 (23)第二排中央座椅安全带操作说明 (25)胯/肩式安全带解缠绕步骤 (27)可调上肩部安全带固定器 (27)孕妇使用座椅安全带须知 (28)座椅安全带预紧器 (28)能量管理功能 (28)自动锁止卷收器(ALR)——如果配备 (28)如何启用自动锁止模式 (29)如何解除自动锁止模式 (29)辅助主动式头枕(AHR) (30)主动式头枕(AHR)的工作原理 (30)主动式头枕(AHR)复位 (30)辅助防护系统(SRS)气囊 (32)前部智能气囊 (32)前部智能气囊功能 (33)前部智能气囊操作 (33)膝部防撞缓冲垫 (34)辅助侧面气囊 (34)侧面碰撞 (36)翻车事故 (36)倘若气囊展开 (36)强化应急反应系统 (37)系统复位步骤 (37)气囊警告灯 (37)保养您的气囊系统 (37)车辆事故记录仪(EDR) (38)儿童防护装置——安全搭载儿童 (38)通用型儿童防护系统 (39)发动机磨合建议 (46)安全提示 (46)搭载乘客 (46)废气 (46)车内安全检查事项 (47)汽车装备操作使用说明 (48)车内/外后视镜/梳妆镜/遮阳板 (48)车内日/夜后视镜 (48)车内自动防眩目后视镜——如果配备 (48)车外后视镜-—驾驶员侧 (49)车外后视镜-—前排乘客侧 (49)折叠车外后视镜 (49)电动后视镜 (49)电加热式车外后视镜——如果配备 (50)梳妆镜—-如果配备 (50)遮阳板滑动功能 (51)Uconnect® Phone——如果配备 (51)兼容的电话 (51)操作 (52)电话呼叫功能 (55)Uconnect® Phone功能 (56)高级电话连接 (58)Uconnect® Phone须知 (59)语音命令-—如果配备 (62)语音指令系统操作 (62)命令 (63)语音训练 (65)座椅 (65)电动座椅—-如果配备 (65)加热式座椅--如果配备 (66)手动前排座椅调节 (67)手动座椅高度调节——如果配备 (67)手动腰部支撑-—如果配备 (68)驾驶员座椅靠背倾斜 (68)折叠前排乘客座椅——如果配备 (69)头枕 (69)折叠式后排座椅 (71)调节后排座椅靠背倾角——如果配备 (71)打开和关闭发动机罩 (72)车灯 (73)多功能控制杆 (73)大灯和驻车灯 (74)灯光未关提醒装置 (74)前雾灯 (74)后雾灯 (74)转向信号灯 (74)车道变换辅助 (75)远光灯/近光灯开关 (75)闪光通过 (75)仪表板调光器 (75)地图/阅读灯 (76)风挡玻璃雨刮器和清洗器 (77)风挡玻璃雨刮器操作 (77)间歇式雨刮器系统 (77)风挡玻璃清洗器 (78)除雾功能 (78)倾斜转向柱 (78)电子巡航控制系统-—如果配备 (79)启用 (79)设置所需速度 (79)停用 (79)恢复速度 (80)改变速度设置 (80)加速超车 (80)PARKVIEW®影像泊车辅助系统——如果配备 (80)电动天窗——如果配备 (81)打开天窗——快速 (81)打开天窗-—手动模式 (81)关闭天窗——快速 (82)关闭天窗—-手动模式 (82)防夹保护功能 (82)天窗通风—-快速 (82)遮阳板操作 (82)风噪音 (82)天窗保养 (82)点火开关操作 (82)电源插座 (83)杯托 (84)储物 (84)手套箱与储物箱 (84)车门储物区 (85)控制台功能 (86)行李区功能 (87)行李箱灯 (87)行李区盖板 (87)可拆卸承载地板 (88)行李绑带环 (88)向下折叠扬声器——如果配备 (89)后车窗功能 (89)后窗雨刮器/清洗器 (89)后车窗除霜器 (90)前言前言恭喜您选择了全新的克莱斯勒汽车。
VT1030重要安全說明使用電話時要遵從基本安全防預措施,以免起火、觸電和受傷。
1. 閱讀並理解全部說明。
2. 遵從產品標籤上的警告和說明。
3. 清潔前,先切斷本產品電源,然後用扭乾的濕布清潔,不應使用液體或噴霧清潔劑。
4. 請勿在潮濕地方(如浴缸、廚房洗滌槽或游泳池)安裝本產品。
5. 請保護產品避免跌落,否則可能造成嚴重損壞。
6. 外殼、背面或底部的開槽和插口均作通風之用。
為防止產品過熱,不要將本產品放於床、沙發、墊子或其他類似物品上,避免阻塞這些通風口。
本產品不應靠近或放置於暖氣設備上,亦不應放置在通風不良的位置或空間內。
7. 本產品必須使用適當的電源供應。
如果不能確定您使用的電源供應,請諮詢零售商或當地供電公司。
8. 避免踐踏產品電線,或把物件放置在電線上。
9. 不要從外殼插孔塞進任何東西,以防止觸及危險電壓或損壞元件,導致起火或觸電。
切勿在本產品上潑濺任何液體。
10. 自行拆卸或裝配本產品,有可能導致觸電或其他意外。
11. 勿令電源插座和拖板的電力負荷過重,以免起火或觸電。
12. 主機設計為垂直或水平安裝,如電源插座置於天花、檯底或櫃身,主機的電源插頭未必能牢固插穩。
13. 出現以下情況時,應切斷電源,並尋求偉易達的支援:A. 電線或插頭損壞或磨損。
B. 產品被液體潑濺。
C. 產品被水(如雨水)弄濕。
D. 遵照說明書操作,產品仍不能正常運作。
切勿胡亂調校產品,以免造成損害。
E. 產品摔落,外殼損毀。
F. 產品性能出現明顯變化。
14. 避免在雷暴中使用電話(無線類型除外),因為會有雷擊的可能。
15. 切勿在煤氣洩漏的地方使用電話。
16. 確保電話正常操作時才貼近耳朵。
目錄入門位置 (1)設定 (1)設定日期和時間 (3)設定充電器 (4)認識您的電話手機 (6)手機圖示 (7)主機和充電器 (8)瀏覽主目錄 (9)手機菜單列表 (10)原廠設定 (11)原廠設定表 (12)使用電話打出電話 (13)預撥 (13)掛線 (13)接聽電話 (13)音量 (14)免提通話 (14)免提打出電話 (14)免提接聽電話 (15)通話時轉至免提通話 (15)保密 (15)重撥 (15)把重撥號碼複製到電話簿 ...........................16刪除重撥清單裡的一個號碼 .. (17)刪除整個重撥清單 (17)鍵盤上鎖 (18)開關電話鈴聲 (18)傳呼手機 (18)打出內部電話 (19)接聽內部電話 (19)轉駁電話 (19)電話會議 (20)電話簿儲存電話號碼 (21)輸入姓名 (21)打出 / 檢視電話號碼 (22)編輯電話簿項目 (22)刪除一個電話簿項目 (23)刪除電話簿所有項目 (23)電話簿容量 (24)手機設定鈴聲旋律 (25)鈴聲音量 (25)開關手機提示聲 (26)手機名字 (27)顯示 (27)註冊手機 (28)鬧鐘 (28)自動接聽 (29)目錄主機設定改變PIN碼 (30)撥號模式 (30)鈴聲旋律 (31)鈴聲音量 (32)刪除手機 (32)來電顯示來電記錄清單 (33)檢視 / 打出電話號碼 (33)把來電記錄號碼複製到電話簿 (34)刪除電話號碼 (34)刪除整個來電記錄清單 (35)留言系統開關系統 (36)對外留言 (37)接聽來電和錄音 (37)只接聽來電 (37)選擇接聽來電模式 (38)錄製您的對外留言 (38)播放 / 檢查對外留言 (39)重置預設的對外留言 (39)播放留言 (40)調校重播留言的音量 (41)刪除所有舊留言 (41)記憶體已滿 (41)延遲接聽 ....................................................42遙控密碼 . (43)改變PIN碼 (43)啟動留言系統 (43)檢查留言 (44)遙控指令 (44)解惑排難 (45)一般資料安全 (47)清潔 (47)環境 (47)棄置產品指示 (48)技術數據 (49)入門前,您需要重新替您的手機入門目錄 開啟主目錄。
Operating Instructions for the Globalstar GSP-1600 – Portable Satellite PhoneThis portable satellite phone is designed to only operate outside, in the clear, or in a vehicle when using the car kit. Although is has a small collapsible antenna for cellular use, it has not been set up for this function. It will not connect to the satellite system if the antenna is not out in the open.To operate this phone, proceed as follows:1. Turn power on by pressing power button briefly. (Please make sure the battery is sufficientlycharged as indicated by the charge status indicator in the upper right hand corner of the display.) 2. Go outside. You need to be in the clear of all trees and buildings and be able so see 10 degreesabove the horizon in all directions and above.3. Rotate antenna to be in a vertical position while looking at the display.4. An antenna symbol will appear along a series of 5 bars, the tallest being maximum. This is in theupper left corner of the display.5. Wait for the "reverse I" to appear to the right of "Globalstar". This is essential and means that theunit is registered on the Globalstar network.6. To place a call, dial 1, then the area code, and the 7 digit phone number. Then press send. (It isa long-distance call to and from any number you call.)7. Move the handset to your ear with the rotatable antenna positioned vertically.8. Wait at least 30 seconds for the call to complete – it takes time for the signal to reach the satellite,return to earth and reach the destination phone.9. If the phone fails to register (no “i”) within about 2 minutes:•Power cycle the phone & reboot.•Press * for 2 seconds, then select “Globalstar” – forces the phone backon to the home gateway10. To end the call, press end.11. Note: To determine the phone number assigned, press the Info button, then press Clr.Detailed operating instructions of this unit is available in the user guide.Customer Care 1-877-452-5782Or enter *611 from the telephone keypad.Satellite Icon indicates thephone is in satellite mode.Signal strength metershows 4+ bars for goodsignal.Battery life indicatorshows percentage ofcharge remaining.GSP 1600 portable satellite phoneWith the addition of a Car-kit:Operating the portable satellite phone from a vehicle is identical, EXCEPT, that you must place the portable magnetic-mount antenna on the metal roof of the car. The vehicle must be away from trees, buildings, etc, so that the antenna has a clear view of the sky. The phone may be charged with the optional cigarette-lighter accessory while in the vehicle, so as not to run down the phone battery. Read the instruction sheets for installing in a vehicle.Operating Instructions for the Globalstar GSP-2900 “Fixed” satellite phoneThis fixed site satellite phone is designed for in-building use and interfaces with a standard analog telephone set for control of all its functions.1. To place a call, lift the handset and confirm there is dial tone. Dial the number by dialing 1, areacode and the seven digit phone number. (It is a long-distance call to and from any number you call.)•Do NOT dial a 9 before the 1+ 10-digit number, unless your phone is wired into your PBX (switchboard) This will result in a call failure.•DO dial the 1 +area code+ seven-digit number.2. Wait at least 30 seconds for the call to connect to the satellite and back down to the destinationphone number. This is called latency – it takes longer than a cell phone or land-line phone to connect.3. If you get a fast-busy signal, this usually indicates that there is no satellite within range of theantenna. Hang up and wait 2-3 minutes. Try your call again.4. If you need assistance, have questions, or want to report a problem, call the Customer Careservice desk at the number below, or contact the installation vendor that installed your phone. Customer Care 1-877-452-5782Or enter *611 from the telephone keypad.Roof-top antenna。
SECTION 27 41 16.28INTEGRATED AUDIO VIDEO SYSTEMS AND EQUIPMENT FOR CONFERENCEROOMSProduct Specified in this section:Crestron CCS-UC-1Crestron CCS-UC-1-AV KITTable of ContentsPART 1GENERAL (3)1.1SUMMARY (3)A.Section Includes: (3)B.Related Requirements (3)1.2REFERENCES (4)A.Abbreviations and Acronyms (4)B.Definitions .............................................................................. E rror! Bookmark not defined. PART 2PRODUCTS .. (4)2.1TABLETOP CONFERENCE SYSTEM (4)A.Manufacturers: (4)B.Basis of Design Product: (4)C.Tabletop Conference System Composition (4)D.External Device and System Integration (5)E.Video Presentation (5)F.Speakerphone (5)G.Room Occupancy Detection (5)H.Touch Screen User Interface (6)I.Mute Control (6)work Management (6)work Security (6)2.2HARDWARE SPECIFICATIONS (7)munications (7)B.Audio (7)C.Video (7)D.Occupancy Sensor (8)E.Touch Screen (8)F.Buttons & Indicators (8)G.Connectors (8)H.Power (9)I.Environmental (9)pliance (9)K. (9)2.3INTEGRATION (9)munication (9)PART 3EXECUTION (9)END OF SECTION 25 15 16 (9)SECTION 27 41 16.28INTEGRATED AUDIO VIDEO SYSTEMS AND EQUIPMENT FOR CONFERENCEROOMSSpecifier: The Specifier/Design Professional is responsible for the accuracy of all project specifications, including system application and coordination with related sections. This guide specification is provided as a convenience and requires editing to match actual project requirements. CRESTRON ELECTRONICS, INC. SHALL NOT BE LIABLE FOR ANY DAMAGES ARISING OUT OF THE USE OF ANY OF ITS GUIDE SPECIFICATIONS. For Crestron design assistance and design review please contact Sales Support Ser-*****************************************************.PART 1GENERAL1.1SUMMARYA.Section Includes:1.An enterprise level networked tabletop conference system.2.Upon final installation and commissioning the system will provide:a.Voice Calling & Audio Conferencingb.BYOD Multimedia Presentation Capabilityc.Videoconferencing & Web Collaboration Capabilityd.Workplace IntegrationB.Related Requirements1.Section 12 24 13 — Roller Window Shades2.Section 23 09 23 — Direct Digital Control System for HVAC3.Section 25 08 00 — Commissioning of Integrated Automation4.Section 25 10 00 — Integrated Automation Network Equipment5.Section 25 11 13 — Integrated Automation Network Servers6.Section 25 13 13 — Integrated Automation Control and Monitoring NetworkSupervisory Control7.Section 25 13 16 — Integrated Automation Control and Monitoring NetworkIntegration Panels8.Section 25 13 19 — Integrated Automation Control and Monitoring NetworkInteroperability9.Section 25 15 16 — Integrated Automation Software for Control and MonitoringNetworks10.Section 25 50 00 — Integrated Automation Facility Controls11.Section 25 90 00 — Integrated Automation Control Sequences12.Section 26 09 43.13 — Digital-Network Lighting Controls13.Section 26 05 00 — Common Work Results for Electrical14.Section 26 09 23 — Lighting Control Devices15.Section 26 09 36 — Modular Dimming Controls16.Section 26 09 43 — Network Lighting Controls17.Section 27 15 00 — Communications Horizontal Cabling18.Section 27 41 00 — Audio-Video Systems19.Section 27 41 13 — Architecturally Integrated Audio-Video Equipment20.Section 27 41 16 — Integrated Audio-Video Systems and Equipment1.2REFERENCESA.Abbreviations and Acronyms1.BYOD – Bring Your Own Device2.UI – User Interface3.AV – Audio VideoPART 2PRODUCTS2.1TABLETOP CONFERENCE SYSTEMA.Manufacturers:1.Basis-of-Design Manufacturer: Subject to compliance with requirements, provideproducts of Crestron Electronics, Inc., Rockleigh, NJ 07647, Phone 800-237-2041, Fax: 201-767-1903, with the following components andcharacteristics.B.Basis of Design Product:1.Crestron CCS-UC-12.Crestron CCS-UC-1-AV KITSpecifier Note:Multiple CCS-U-1 models are offered to accommodate different applications and budgets. The base unit (CCS-UC-1) supports full SIP VoIP speakerphone, Bluetooth, and USB Audio capabilities. The video pack-age (CCS-UC-1-AV KIT) adds capabilities for multimedia presentation and videoconferencing, and in-cludes a USB camera. Both models are powerable using PoE+, and versions of each are also offered with a 100-240V universal power pack included (CCS-UC-1 W/PS KIT & CCS-UC-1-AV W/PS KIT). All models come complete with all required cables.C.Tabletop Conference System Composition1.The Tabletop Conference System shall be composed of the following systemcomponents:er Interfaceb.Microphonec.Speakerd.Optional external microphone connectione.HDMI input and outputB camera and audio portsN portsSpecifier: Edit the following system components to correspond to Project requirements.D.External Device and System Integrationptop running 3rd party soft codec2.Microsoft Exchange Server3.Crestron Fusion Cloud and Pinpoint App4.SIP compliant phone system5.Mobile phone with Bluetooth6.HDMI wired source device7.Wired or Wireless Ethernet video connectionSpecifier: Only the CCS-UC-1-AV KIT version includes video presentation features. Please see CCS-UC-1 Spec. Sheet Packages table for more information.E.Video Presentation1.The Tabletop Conference System shall include an HDMI input connection forconnection of a full-motion HD 1080p60 AV source to the room display.2.The Tabletop Conference System shall include a built-in Ethernet wired or wirelesspresentation gateway. In wireless Ethernet mode a video source may connect tothe system wirelessly.3.The Tabletop Conference System shall include a USB HD camera for integrationwith BYOD laptop with web video conferencing software.4.The HDMI and presentation gateway shall be internally routed to the TabletopConference System’s HDMI output for connection to the room display. Specifier Note:Videoconferencing & Web Collaboration• Mercury can turn any space into a videoconference room by simply connecting a laptop running Skype® for Business, Cisco WebEx®, GotoMeeting®, Slack®, or another web conferencing or UC appli-cation.• Connect the laptop via USB and Mercury provides enhanced audio along with a high-definition view of the whole room through the included USB camera.• No more huddling around a laptop to interact and share content with remote participants. Connect the laptop’s HDMI output to allow the whole room to view content and camera images on the main dis-play.Please see link for more details: /products/model/CCS-UC-1F.Speakerphone1.The Tabletop Conference System shall include full-duplex speakerphone supportfor the following:a.VoIP systemsb.Bluetooth paired mobile deviceptop Softphone softwareG.Room Occupancy Detection1.The Tabletop Conference System shall include built-in room occupancy sensingcapabilities using motion detection and voice activity for determining occupied orunoccupied status state.2.Controlled devices may be powered down in an unoccupied room state.3.Through software management systems an unoccupied room may be madeavailable on the management system calendar.H.Touch Screen User Interface1.The Tabletop Conference System shall include an integrated touch screen userinterface with the following capabilities:a.Dialing voice callsb.Answering voice callsc.Muting microphone(s)2.The Tabletop Conference System shall support integration with Microsoft Exchangeand Crestron Fusion Cloud software management systems. Through softwaremanagement system the following user interface features shall be supported:1)Manage room schedule2)View meeting progress showing time remaining3)Extend meeting end time4)Schedule new meeting5)Look up contactsI.Mute Control1.The Tabletop Conference system shall include a mute control with bright bi-colorindicator for mute state visibility.work Management1.The Tabletop Conference System shall support:a.Cloud-based provisioning enabling complete network configuration inadvance of hardware installation, with touchless updates followinginstallation.b.Individual configuration using a computer web browser.c.Crestron Fusion Cloud management enables monitoring and logging of roomand equipment usage, as well as centralized help desk support.work Security1.The Tabletop Conference System shall support advanced security featuresincluding:a.802.1x authenticationb.Active Directory credential managementc.LDAP directory managementd.SRTP, SSH, TLS, and HTTPS.e.Secondary LAN port:1)VoIP or built-in presentation gateway traffic may be isolated on asecondary network2.2HARDWARE SPECIFICATIONSmunications1.Ethernet: 10/100 Mbps (x2), auto-switching, auto-negotiating, auto-discovery,full/half duplex, TCP/IP, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH FileTransfer Protocol), SRTP, IEEE 802.1X, Active Directory authentication, LDAP,digest access authentication, password login, HTTPS secure provisioning, IEEE802.3at Type 2 compliant2.VoIP: Open SIP, SDP, IETF SIP (RFC 3261 & companion RFCs), DTMF tonegeneration (RFC 2833 & in-band), low-delay audio packet transmission, adaptivejitter buffers, packet loss concealment3.Bluetooth: Bluetooth4.0 device pairing for wideband speech (HFP) and multimediaaudio streaming (A2DP), proximity detection beaconB Device: USB 2.0 wired interface for computer running web conferencingsoftware or USB AudioB Host: USB 2.0 for camera input6.RS-232: 2-way display device control and monitoring up to 115.2k baud withsoftware handshaking7.IR/Serial: 1-way display device control via infrared up to 1.1 MHz or serial TTL/RS-232 (0-5 Volts) up to 19.2k baud8.HDMI: HDCP 1.4, EDID, CEC9.Presentation gateway: connects to mobile devices via wired or wireless Ethernet10.Mic Pod: A2B bus protocol, single master, multiple slave; synchronous data,multichannel I2S/TDM to I2S/TDMB.Audio1.Codec Support: G.711, G.722, G.7292.AEC: Limes Audio TrueVoice acoustic echo cancellation, automatic mic mixing,automatic gain control, and dynamic noise reduction; full-duplex IEEE 1329 Type 1compliant3.Microphones: Quad mic array with (4) cardioid electret elements; Pickup Range:20 ft. (6 m) typical4.Speaker: Full range speaker5.Amplifier Power: 11 Watts maximum6.Output Volume: 95 dB SPL at 0.5 m7.Frequency Response: 90 Hz to 22 kHzC.Video1.Content Input Signal Types: HDMI (DVI & Dual-Mode DisplayPort compatible withseparate adaptor), built-in presentation gateway2.Pass-through Camera Input/Output Signal Type: USB3.Display Output Signal Types: HDMI (DVI compatible with separate)4.Content Input Resolutions: Up to 1920x1080@60Hz (1080p60)5.Display Output Resolutions: 1280x720@50Hz (720p50), 1280x720@60Hz(720p60), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60)D.Occupancy Sensor1.PIR Detection Range: 6 ft. (1.83 m) in front of touch screen, wakes system (touchscreen and video display) and reports room occupancy to Crestron Fusion2.Voice Activity Detection: Keeps room occupancy, touch screen, and display activeas long as speech is detected through the microphonesE.Touch Screen1.Display Type: TFT active matrix color LCD2.Size: 7 inch (178 mm) diagonal3.Aspect Ratio: 16:9 HD 7204.Resolution: 1280 x 720 pixel5.Touch Screen: Capacitive, multi-touch capable6.Character Support: Unicode UTF-8nguage Support: Arabic, Chinese (Simplified), Chinese (Traditional), Czech,Danish, Dutch (NL), English (UK), English (US), Finnish, French (FR), German(DE), Greek, Hebrew, Hungarian, Italian (IT), Japanese (JP), Korean, Norwegian(NO), Polish, Portuguese, Portuguese (Brazilian), Romanian, Russian (RU), Slovak,Spanish (ES), Swedish, ThaiF.Buttons & Indicators1.Mic Mute Symbol & Light Bar: (2) Capacitive “buttons” with bi-color LEDs, eitherbutton toggles between mute and unmute, the symbol LED blinks green when theunit is powering up, all LEDs illuminate red when the mic is muted (and a redborder appears around the touch screen display), all LEDs illuminate green whenthe mic is unmuted if a USB device is connected or a SIP call is activeG.Connectors1.G: (1) 6-32 screw; Chassis ground lugN: (1) 8-pin RJ45 female; 10Base-T/100Base-TX Ethernet port; PoE+ PD port3.AUX: (1) 8-pin RJ45 female; 10Base-T/100Base-TX Ethernet port; Alternate LANconnection for separate SIP or presentation gateway network.4.IR: (1) 3.5 mm mini-phone jack; IR output port for display device control.: (1) 3.5 mm TRS mini phone jack; Bidirectional RS-232 port for displaydevice control.B B: (1) Micro-USB Type B female USB 2.0 device port7.HDMI OUT: (1) 19-pin Type A HDMI female; Digital video/audio output for displaydevice.8.HDMI IN: (1) 19-pin Type A HDMI female; Digital video/audio input forpresentation content source9.MIC POD 1 – 2: (2) RJ9 4P4C female; For connection of up to two microphonepods.B/CAM: (1) USB Type A, female; USB 2.0 host port for camera.11.24V DC 2.5A: (1) 2.1 x 5.5 mm DC power connector; 24 Volt DC power input foruniversal power pack.H.Power1.Power Pack: Input: 100-240 Volts AC, 50/60 Hz2.Power over Ethernet: IEEE 802.3at Type 2, Class 4 (25.5 W) PoE+ PoweredDevice3.Power Consumption: 20 Watts typicalI.Environmental1.Operational Temperature: 32° to 95° F (0° to 35° C)2.Storage Temperature: -4° to 160° F (-20° to 70° C)3.Humidity: 5% to 95% RH (non-condensing)4.Heat Dissipation: 123 BTU/hrpliance1.UL 60950-1, FCC Part 15 Class A, Japan MIC/VCCI Class A, ICES-003 Issue 5 ClassA, EN55022:2010 Class A, AS/NZS CISPR22:2010 Class A, VCCI Class A,EN55024:2010, EN61000-3-2:2014, EN61000-3-3:2013, EN60950-1:2006,EN60950-A2:2013, EN60950-A11:2009, EN60950-A1:2010, EN60950-A12:2011,FCC 15.247, RSS 210 Issue 8, RSS Gen Issue 4, ETSI EN 301 489-1, ETSI EN 301489-17, AS/NZS 4268:2012, NZ Telepermit, Australia A&C Tick, RoHS compliant K.2.3INTEGRATIONmunication1.Tabletop Conference System shall connect to user network(s) via built-in Ethernetports.PART 3EXECUTIONNot UsedEND OF SECTION 25 15 16。
QSG145: WGM110 SLEXP4320 Wi-Fi Expansion Kit Quick-Start GuideThe WGM110 Wi-Fi Expansion Kit is an excellent way to get star-ted with Wi-Fi connectivity for Silicon Labs MCUs.The kit contains an expansion board that can be connected to one of 3 MCU starter-kits,listed below. The expansion board allows the EFM32 MCU to connect to a WGM110 Wi-Fi module, which can connect to Wi-Fi networks, but also be an access point to which other devices can connect. The expansion kit works with the following Silicon Labs MCU Starter kits:•EFM32 Pearl Gecko PG12 Starter Kit – SLSTK3402A •EFM32 Pearl Gecko PG1 Starter Kit – SLSTK3401A •EFM32 Giant Gecko GG11 Starter Kit – SLSTK3701AKIT CONTENTS•Expansion board with radio board socket •WGM110 radio board •Getting Started card1. Getting StartedRequired ComponentsThe WGM110 Wi-Fi Expansion Kit contains a Wi-Fi module. To use the kit, an MCU starter-kit is required, where the MCU will be the host that communicates and controls the Wi-Fi module. Supported Starter Kits are listed below. Click the link to see a description of the kit and associated MCU, and ensure one of these kits is available:•EFM32 Pearl Gecko PG12 Starter Kit – SLSTK3402Ahttps:///products/development-tools/mcu/32-bit/efm32-pearl-gecko-pg12-starter-kit•EFM32 Pearl Gecko PG1 Starter Kit – SLSTK3401Ahttps:///products/development-tools/mcu/32-bit/efm32-pearl-gecko-starter-kit•EFM32 Giant Gecko GG11 Starter Kit – SLSTK3701Ahttps:///products/development-tools/mcu/32-bit/efm32-giant-gecko-gg11-starter-kitInstall Simplicity StudioSimplicity Studio is a free software suite needed to start developing your application.1.Download the latest version of Simplicity Studio from the Silicon Labs website: /simplicity-studio.might take some time to appear due to driver installations for the debug adapter.2.Once an item with a name that starts with [J-Link Silicon Labs] appears, expand it by clicking the arrow, and verify that the detec-ted device matches your kit.Set Up Your Wi-Fi Access PointBefore playing with the demo, the demo needs to know what Wi-Fi access point it should connect to. To keep things simple, these are hard-coded in a file called app_wifi_cfg.h. In an end-application, these could be obtained through presenting a UI to the user, or by setting up an access point on the WGM110 and leveraging the built-in web-server to allow a cell phone or computer to connect to the WGM110 in order to configure it.1.Select the MCU Starter Kit in the [Device] area.2.Under [Getting Started] in the Launcher, scroll down in the [Software Examples] column until you find [micriumos_wifi_white-board] and click it.3.Answer [Yes] when a dialog opens asking you whether you want to switch to the IDE perspective and create the example project.4.In the Simplicity IDE, locate the [Project Explorer] and expand the new project that was created. Go into the [Cfg] folder and openapp_wifi_cfg.h.5.In app_wifi_cfg.h, change the value of APP_WIFI_AP_SSID and APP_WIFI_AP_PWD to the values of the Wi-Fi access point youwant to connect to.Note:If the app_wifi_cfg.h file is not visible in the [Cfg] folder, you can find the file in one of three ways:1.Pressing [F3] when the cursor hovers over any of the configuration macros like APP_WIFI_AP_SSID.2.Expanding the includes tree to find the app_wifi_cfg.h file.3.Navigating to the project. In Windows, this would typically be located in C:\Users\<username>\SimplicityStudio\<workspace>\<demo name>.Start the Example1.Click the [Debug] button to compile and download the demo to the MCU. Once downloaded, click the [Resume]button. The demo will show several messages as it attempts to connect to the Wi-Fi network and then the AWS service that serves the demo.2.Press [BTN1] and verify that the display shows a MAC Address status message:3.In case the application does not display the status message and instead remains in one of the other status messages, try the fol-lowing troubleshooting tips:a.Confirm that your Wireless Access Point’s SSID and Password match those configured in app_wifi_cfg.h.b.Confirm that the WGM110 is running the latest firmware from the Wizard Gecko Wi-Fi SDK. To do this, download http:///products/development-tools/software/wizard-gecko-wi-fi-sdk and upgrade the device firmware using BGTool in the bin folder and the production.bin firmware image in the example/production folder.c.Confirm that the Wireless Access Point has access to the Internet and that your Internet Provider’s DNS can resolve demo.si-.Draw on the Wireless Whiteboard1.The whiteboard supports black and white and colored drawings depending on the LCD onboard the Starter Kit.2.Open your favorite Internet browser, go to the page at /whiteboard, and select the Wireless WhiteboardDemo for the Starter Kit.3.After selecting the correct board, enter the board’s [MAC address] in the top-right corner of the web page and start drawing. TheMAC address is displayed on the display of the Starter Kit.4.Draw something in the view.5.The drawing will appear on the kit display. Use the kit buttons [BTN0] and [BTN1] to switch between screens.6.Keep drawing. The image drawn on the whiteboard is dynamically transferred to the kit display.2. How the Example WorksThe embedded application in the host MCU runs on MicriumOS, and the Wi-Fi module is connected to the Host MCU via a UART inter-face. The LCD screen is connected via an SPI interface on the Host MCU.The board displays its MACaddress on the LCD.the page and enter the board’s MAC address (unique ID).When a finger lifts from the touch screen, an image of AWS EC2 not only hosts the whiteboard webpage, but also acts as a proxy server to process the image.The web service converts the image to a specialformat that makes it ready to display on the board’s LCD.Figure 2.1. System OverviewBSP_Init()CPU_Init()Mem_Init()DISPLAY_Init()DMD_Init()GLIB_contextInit()BGLIB_INITIALIZE()AppTaskCreate()Push ButtonsBTN1BTN0WiFi ModuleWGM110Figure 2.2. Software System Overview1.The main() function starts by initializing MicriumOS Kernel through a call to OSInit(), which in turn creates the following internal tasks:•Tick Task—OS_TickTask() is used by the Kernel to keep track of tasks waiting for time to expire or for tasks that are pending on kernel objects with a timeout. OS_TickTask() is a periodic task that waits for signals from the tick ISR.•Statistics Task—OS_StatTask() is used by the Kernel to calculate run-time statistics such as CPU usage.•Idle Task—OS_IdleTask() is used by the Kernel to run whenever there are no other tasks that are ready to run.main() continues by creating the Startup Task and starting the multi-tasking process by calling OSStart().2.The Startup Task is used to initialize various hardware and software modules, including the Memory LCD and the WGM110 Wi-Fi module interface. The Startup Task finishes the startup process by creating the rest of application tasks as follows:•Display Task—the application uses this task to process commands to display something on the LCD, including status messages and the image drawn by the user. It is also responsible to process the push button interrupts. The task simply waits for a signal to its own semaphore from either the GPIO Interrupt Service Routine or the Wi-Fi task to process the different commands.•WiFi Task—the application uses this task to process the responses and events from the Wi-Fi module. The task waits for a signal from the UART ISR before processing each command.3.To understand how the Wi-Fi connection is managed, read through app_wifi.c , which implements the connection and communi-cation aspects of the demo. Use the WGM110 API Reference Manual to see how the BGLIB API works and how to communicate with the WGM110 module. See4. Additional Resources for more information.3. Extended DebuggingMicrium µC/Probe is an application that allows you to read and write the memory of any embedded target processor during run-time and map those values to a set of virtual controls and indicators placed on a graphical dashboard. In this example application, µC/Probe is used to display during run-time a state machine diagram that shows you the current state of the Wi-Fi module.µC/Probe is a part of the Simplicity Studio installation and is available if it has been selected during installation.1.To make sure µC/Probe is installed, click the [Help] menu, then [Update Software] or the [Update Software] button in the[Launcher] view. In the dialog that opens, navigate to the [Tools] tab, find [Micrium uC/Probe] in the list, and verify that it is instal-led or install it.2.To launch µC/Probe, navigate to [Compatible Tools] from the [Launcher] and scroll down. Alternatively, click the [µC/Probe]button in the [Simplicity IDE] view.Figure 3.1. Micrium µC/ProbeThe µC/Probe software will initially open with a blank workspace. After opening µC/Probe:1.Go to [File]>[Open].2.Browse to the [micriumos_wifi_whiteboard] project typically located in C:\Users\<username>\SimplicityStudio\<workspace>\<demo name> on Windows, and select the Probe\uCProbe.wspx file.3.A [Missing File] dialog may be displayed. If so, click the [Browse...] button in the dialog. Select the ELF file that is typically locatedin the following folder: C:\Users\<username>\SimplicityStudio\<workspace>\SLSTK*_micriumos_wifi_whiteboard\GNU AR M v4.9.3 – Debug\*.axf. Click [Update] The .axf file contains information about the compiled program, and can also be upda-ted by clicking the [ELF] button in the main window.4.Click the [Run] button in the [Home] menu bar to run the visualization.Figure 3.2. Wireless Whiteboard Status ScreenThis software can also show a list of MicriumOS tasks, along with their runtime statistics. If this is not available in the visualization as an additional tab, go out of the visualization, find the [Workspace Explorer ] on the right-hand side, click the [Screens ] menu, and select[Micrium OS Kernel (µC/OS-5)]. Then, click the [Run] button to run the visualization again and select the corresponding tab.Figure 3.3. Wi-Fi Demo Usage Statistics in Micrium µC/ProbeExtended Debugging| Building a more connected world.Rev. 0.1 | 11Additional Resources 4.Additional ResourcesFor more information, review the following:•W GM110 Wizard Gecko Wi-Fi® Module Data Sheet•WGM110 API Reference Manual•Starter Kit MCU Data Sheet•Starter Kit MCU Reference Manual Silicon Laboratories Inc.400 West Cesar Chavez Austin, TX 78701USASimplicity StudioOne-click access to MCU andwireless tools, documentation,software, source code libraries &more. Available for Windows,Mac and Linux!IoT Portfolio /IoT SW/HW /simplicity Quality /quality Support and CommunityDisclaimer Silicon Labs intends to provide customers with the latest, accurate, and in-depth documentation of all peripherals and modules available for system and software implementers using or intending to use the Silicon Labs products. Characterization data, available modules and peripherals, memory sizes and memory addresses refer to each specific device, and "Typical" parameters provided can and do vary in different applications. Application examples described herein are for illustrative purposes only. Silicon Labs reserves the right to make changes without further notice and limitation to product information, specifications, and descriptions herein, and does not give warranties as to the accuracy or completeness of the included information. Silicon Labs shall have no liability for the consequences of use of the information supplied herein. This document does not imply or express copyright licenses granted hereunder to design or fabricate any integrated circuits. The products are not designed or authorized to be used within any Life Support System without the specific written consent of Silicon Labs. A "Life Support System" is any product or system intended to support or sustain life and/or health, which, if it fails, can be reasonably expected to result in significant personal injury or death. Silicon Labs products are not designed or authorized for military applications. Silicon Labs products shall under no circumstances be used in weapons of mass destruction including (but not limited to) nuclear, biological or chemical weapons, or missiles capable of delivering such weapons.Trademark Information Silicon Laboratories Inc.® , Silicon Laboratories®, Silicon Labs®, SiLabs® and the Silicon Labs logo®, Bluegiga®, Bluegiga Logo®, Clockbuilder®, CMEMS®, DSPLL®, EFM®, EFM32®, EFR, Ember®, Energy Micro, Energy Micro logo and combinations thereof, "the world’s most energy friendly microcontrollers", Ember®, EZLink®, EZRadio®, EZRadioPRO®, Gecko®, ISOmodem®, Micrium, Precision32®, ProSLIC®, Simplicity Studio®, SiPHY®, Telegesis, the Telegesis Logo®, USBXpress®, Zentri and others are trademarks or registered trademarks of Silicon Labs. ARM, CORTEX, Cortex-M3 and THUMB are trademarks or registered trademarks of ARM Holdings. Keil is a registered trademark of ARM Limited. All other products or brand names mentioned herein are trademarks of their respective holders.。
产品类型金牌服务型号金牌服务价格LJ4100/N/TN/DTN LJ 4100MFP U9808E4764 LJ4200/N/TN/DTN/DTNP/DTNPK U9885E4764 LJ4300/N/TN/DTN/DTNP/DTNPK U9887E4764 LJ5100 LJ5100Le/5100 series U9889E4759 LJ8100series/LJ8150series U9846E6688 LJ9000 LJ 9000MFP U9878E12245 Color 3500/N Color 3700/N/TN/DTN U9823E9035 Color LJ4600series U9891E7658 Color LJ5500series U9882E14442 Color LJ9500series U9826E38808 DesignJet 1000U9880E14145 DesignJet 5000, 5500U9879E14145 HP MKRepl CLJ4700 Fuser220V SVC UC747E12000 HP MKRepl CLJ4700 Transfer Kit SVC UC748E12000金牌服务内容金牌服务型号金牌服务价格PC及笔记本系统迁移H7144E1103笔记本电脑1年3R意外保护U4401E512笔记本电脑1年3R意外保护续保U4399E597平板电脑1年3R意外保护U4409E512平板电脑1年3R意外保护续保U4411E597 iPAQ1年3R意外保护U4999E198 iPAQ1年3R意外保护续保U7847E218家用笔记本电脑1年3R意外保护U4429E398家用笔记本电脑1年3R意外保护续保U4428E418惠普家用笔记本两年上门服务U4841E358主动式刀片系统服务(Proactive BladeSystem Services)UG858E172600金牌服务类型金牌服务内容WW Pack Number金牌服务价格硬件安装ML110硬件安装U4444E979硬件安装ML150硬件安装U8195E979硬件安装DL140硬件安装U9520E979硬件安装ML310硬件安装U4456E979硬件安装ML330硬件安装U4473E979硬件安装DL320硬件安装U4490E979硬件安装DL360硬件安装U4506E979硬件安装ML350硬件安装U4522E979硬件安装ML370硬件安装U4538E979硬件安装DL380硬件安装U4554E979硬件安装ML530硬件安装U4585E979硬件安装ML570硬件安装U4601E979硬件安装DL580硬件安装U4617E979硬件安装DL760硬件安装U4633E979硬件安装DL560硬件安装U4707E979硬件安装DL740硬件安装U4723E979硬件安装p-class硬件安装UA219E979硬件安装商用PC硬件安装U4865E210硬件安装笔记本硬件安装U7843E210硬件安装UPS安装U4690E1,173软件安装服务器Linux软件安装UC630E1,122.软件安装服务器Windows NT/Win2000/XP软件安装U5717E969.硬件安装机柜组装U2871E836硬件安装低端存储产品安装(3C)U2090E667硬件安装其他存储产品安装U4823E2230 CIC 安装服务器硬件集成UE131E205 CIC 安装PC硬件集成UE131E154 CIC 安装PC/Server 镜像文件加载UE131E129 CIC 安装SCO UNIX操作系统系统安装UE131E259 CIC 安装BIOS设置UE131E54 CIC 安装贴标签UE131E54 CIC 安装服务器上机柜(低端)UE131E531 CIC 安装服务器上机柜(高端)UE131E799 CIC 安装镜像文件制作UE131E2874 CIC 安装镜像文件测试UE131E1290网络安装彩色激光打印机网络安装H2872E478硬件安装彩色激光打印机硬件安装H4515E387网络安装其他高端黑白激光打印机网络安装H7621E478网络安装中端黑白激光打印机网络安装UC742E478网络安装LJ9000网络安装H7621E478网络安装LJ4100MFP网络安装U2010E478网络安装LJ8150MFP, 8550MFP, 9000MFP网络安装U2014E478网络安装低端黑白激光打印机和高端喷墨打印机网络安装H3110E475硬件安装低端黑白激光打印机和高端喷墨打印机硬件安装H4513E261硬件安装中端黑白激光打印机硬件安装UC741E387硬件安装LJ9000硬件安装H7617E387硬件安装LJ4100MFP硬件安装U2009E387硬件安装LJ8150MFP, 8550MFP, 9000MFP硬件安装U2013E387网络安装高端大幅面打印机网络安装H4518E730网络安装低端大幅面打印机网络安装UC744E478金牌服务类型金牌服务内容WW Pack Number金牌服务价格硬件安装高端大幅面打印机硬件安装H7604E606硬件安装低端大幅面打印机硬件安装UC743E478硬件安装DL380非工作时间硬件安装UF070E2937硬件安装DL580非工作时间硬件安装UF071E2937硬件安装DL760非工作时间硬件安装UF072E2937硬件安装p-class非工作时间硬件安装UF073E2937硬件安装刀片服务器一站式无忧安装服务UG869E68160硬件安装刀片服务器网络高级安装服务HC046E13000金牌服务内容金牌服务型号金牌服务价格HP Startup Vulnerability&Patch Mgmt SVC UC929E2633 HP Startup ProLiant Essent VMM & SMP SVC UD546E4051 HP Startup iLO Power Management SVC UF368E4051 HP Startup Insight Control Environ SVC UF369E8101 HP I&S of HP Sys Insight Mgr Mgmt Agents UA040E556 HP 1y 9x5 ProLiant Ess SWTechSupp U8222E3404 HP 1y 24x7 ProLiant Esnt SW Tech Supp UE452E1127 HP 3y 9x5 ProLiant Esnt SW Support UF514E4611 HP 3y 24x7 ProLiant Esnt SW Support UF515E5226服务种类一年服务三年服务金牌服务型号金牌服务价格金牌服务型号金牌服务价格Red Hat ES v2.1 软件5*9电话支持 - 每服务器不限次U8159E2,466U8160E7,259 Red Hat ES v2.1 软件7*24电话支持 - 每服务器不限次U8161E3,037U8162E8,970 Red Hat ES v3.0 Update3 软件5*9电话支持 - 每服务器不限次UA272E2,466UA273E7,259 Red Hat ES v3.0 Update3 软件7*24电话支持 - 每服务器不限次UA274E3,037UA276E8,970 Red Hat AS v2.1 软件5*9电话支持 - 每服务器不限次U8155E2,960U8156E8,710 Red Hat AS v2.1 软件7*24电话支持 - 每服务器不限次U8157E3,644U8158E10,764 Red Hat AS v3.0 Update3 软件5*9电话支持 - 每服务器不限次UA277E2,960UA278E8,710 Red Hat AS v3.0 Update3 软件7*24电话支持 - 每服务器不限次UA279E3,644UA286E10,764 Red Hat ES/AS 软件5*9电话支持 - 用户环境内所有机器(10事件)U3402E13,388Red Hat ES/AS 软件7*24电话支持 - 用户环境内所有机器(10事件)U3406E18,966Red Hat ES/AS 软件5*9电话支持 - 用户环境内所有机器(25事件)U3407E33,466Red Hat ES/AS 软件7*24电话支持 - 用户环境内所有机器(25事件)U3408E47,418Red Hat ES/AS 软件5*9电话支持 - 用户环境内所有机器(50事件)U3409E66,940Red Hat ES/AS 软件7*24电话支持 - 用户环境内所有机器(50事件)U3410E94,828服务种类服务年限金牌服务型号金牌服务价格备注Microsoft SQL Server/Exchange Server/Windows Server软件24x7电话支持,50事件1年UE819E237,143含MSDN光盘、企业在线技术支持网站Microsoft SQL Server软件产品24x7电话支持,20事件1年UE818E142,286含TechNet光盘、企业在线技术支持网站Microsoft Exchange Server软件24x7电话支持,20事件1年U8294E94,857含TechNet光盘、企业在线技术支持网站Microsoft Windows Server软件24x7电话支持,12事件1年U9269E71,143含企业在线技术支持网站Microsoft Windows Server软件 9x5电话支持,12事件1年U9268E47,429含企业在线技术支持网站产品类型标准保修金牌服务金牌服务型号金牌服务价格LaserJet1010/1012/1015一年送修三年送修U6489E462三年现场,下一工作日到场UA181E536LaserJet1160/1320, LJP2015/d/n/dn/x, LJP2014/n一年送修三年送修H2634E684三年现场,下一工作日到场H5473E980两年送修UD903E480两年现场,下一工作日到场UD905E624一年现场,下一工作日到场UF923E144LaserJet3380, LJ3390/LJ3392一年送修三年送修H2646E1323三年现场,下一工作日到场H5478E1756两年送修UD909E838两年现场,下一工作日到场UD911E1090一年现场,下一工作日到场UF926E293LaserJet3050/z, LJ3052, LJ3055, 3015/3020/3030一年送修三年送修U9809E783三年现场,下一工作日到场U9811E1101两年送修UD906E435两年现场,下一工作日到场UD908E565一年现场,下一工作日到场UF925E152LaserJet M1005一年送修三年送修UH264E783三年现场,下一工作日到场UH463E1101两年送修UH263E435两年现场,下一工作日到场UH462E565一年现场,下一工作日到场UF925E152Color LaserJet CM1015 MFP, CM1017MFP一年现场三年送修UE199E1459三年现场,下一工作日到场UE201E2061两年送修UE663E793两年现场,下一工作日到场UE664E1030 Color LaserJet 2820, 2840一年现场三年现场,下一工作日到场UA337E3718Color LaserJet 1600, 2600n, 2605/dn/dtn一年现场三年送修HC123E2090三年现场,下一工作日到场UC733E2290两年送修UD912E707两年现场,下一工作日到场UD914E919 Color LaserJet 2700/n一年现场三年现场,下一工作日到场UE195E2180 ColorLaserJet 3000/n, 3600/n/dn, 3800n/dn, CP3505/n/dn一年现场三年现场,下一工作日到场U8037E2316产品类型标准保修金牌服务金牌服务型号金牌服务价格ColorLaserJet4700n/dn/dtn, CP4005n/dn一年现场三年现场,下一工作日到场H3113E4692ColorLaserJet5550/dn/dtn一年现场三年现场,下一工作日到场H5549E4340三年现场,5*9,当天4小时到场U3797E5407ColorLaserJet9500n/hdn一年现场三年现场,下一工作日到场U6487E16024三年现场,5*9,当天4小时到场U8058E18565LaserJet2420d/n,LJP3005/d/n/dn/x 一年现场(LaserJet 2420d)三年送修U3789E597三年现场,下一工作日到场U3791E785LaserJet4200/4250一年现场三年送修H2657E576三年现场,下一工作日到场H5479E785LaserJet 4350/n/dn/dtn, 5200/l/n/tn/dtn一年现场三年送修U3468E745三年现场,下一工作日到场U3469E1015LaserJet8100 serise一年现场三年现场,下一工作日到场H5491E5283 LaserJet8150n/dn三年现场,5*9,当天4小时到场U4843E6686LaserJet9000base/n/dn/hns一年现场三年现场,下一工作日到场H7600E11216三年现场,5*9,当天4小时到场U8051E13703LaserJet 9050/n/dn, 9040/n/dn一年现场三年现场,下一工作日到场H7694E15497三年现场,5*9,当天4小时到场U4844E18640DesignJet 90, 100, 120nr, 130一年现场三年送修U3478E9962三年现场,下一工作日到场U3477E11470 DesignJet430一年现场三年现场,下一工作日到场H5650E2503 DesignJet500一年现场三年现场,下一工作日到场H5652E2503 DesignJet800一年现场三年现场,下一工作日到场H5729E2503Designjet 1050c, 1055cm,1050c Plus, 1055cm Plus一年现场三年现场,下一工作日到场H5655E13278 Designjet4000/4000PS三年现场,下一工作日到场H5655E13278DesignJet scanner 4200一年现场三年现场,下一工作日到场U3799E13425DesignJet5000/5500(42")一年现场三年现场,下一工作日到场H5504E28755三年现场,5*9,当天4小时到场H3619E34746产品类型标准保修金牌服务金牌服务型号金牌服务价格DesignJet5000/5500(60")一年现场三年现场,下一工作日到场H5505E28755三年现场,5*9,当天4小时到场H3605E34746DesignJet815MFP一年现场三年现场,下一工作日到场U2006E10362三年现场,5*9,当天4小时到场U9796E13739 DesignJet30一年送修三年现场,下一工作日到场U4663E1689 Designjet4500一年现场三年现场,下一工作日到场UD631E30226DesignJet4500MFP一年现场三年现场,下一工作日到场UD644E92137三年现场,5*9,当天4小时到场UD647E111333DesignJet 2100一年现场三年现场,下一工作日到场UF017E8688三年现场,5*9,当天4小时到场UF020E10498DesignJet 3100一年现场三年现场,下一工作日到场UF035E11220三年现场,5*9,当天4小时到场UF038E13557Z6100-42一年现场三年现场,下一工作日到场H5504E28755三年现场,5*9,当天4小时到场H3619E34746Z6100-60一年现场三年现场,下一工作日到场UG731E28755三年现场,5*9,当天4小时到场UG734E34746T1100一年现场三年现场,下一工作日到场UG723E10525三年现场,5*9,当天4小时到场UG726E12717DesignJet 610一年现场三年现场,下一工作日到场UG750E11229一年现场三年现场,5*9,当天4小时到场UG874E13568DesignJet 8000一年现场三年现场,下一工作日到场UE157E56160三年现场,5*9,当天4小时到场UE160E67860Busines Inkjet 1000/1100/1200一年送修三年送修UA322E325三年现场,下一工作日到场U6492E788HP Business Inkjet 2300/2800一年送修三年送修UA146E1036三年现场,下一工作日到场H7672E1452Business InkJet 3000一年送修三年送修UA335E2898三年现场,下一工作日到场U3525E3437IPG 3 年产品类型标准保修金牌服务金牌服务型号金牌服务价格DeskJet1120/1125/1180c, DeskJet1280C一年送修三年送修H3686E192三年现场,下一工作日到场H3680E299DeskJet450C一年送修三年送修H3686E192 DeskJet9300/9600/9650/9680/98**三年现场,下一工作日到场H3680E299OfficeJet 91**三年现场,下一工作日到场U9816E791Digital sender 9200C, 9250 一年现场,下一工作日到场三年现场,下一工作日到场U4659E5446LaserJet 4345MFP, M4345x MFP一年现场三年现场,下一工作日到场H7668E8462LaserJet9000MFP, 9040MFP, 9050MFP一年现场三年现场,下一工作日到场H7700E66817三年现场,5*9,当天4小时到场U4928E83596Color LaserJet9500MFP一年现场三年现场,下一工作日到场H4597E80615三年现场,5*9,当天4小时到场U3798E95318 Color LaserJet CM4730mfp, CM4730f MFP一年现场三年现场,下一工作日到场HC113E12445M3027MFP, M3027x MFP一年现场三年现场,下一工作日到场UF005E3907三年现场,5*9,当天4小时到场UF008E4884M3035MFP, M3035xs MFP一年现场三年现场,下一工作日到场UE685E4279三年现场,5*9,当天4小时到场UE688E5349M5025MFP一年现场三年现场,下一工作日到场UE719E6698三年现场,5*9,当天4小时到场UE996E8373M5035MFP, M5035xs MFP一年现场三年现场,下一工作日到场UE670E7627三年现场,5*9,当天4小时到场UE673E9534 J7934A 网卡一年送修三年现场,下一工作日到场U4657E553产品类型标准保修金牌服务金牌服务型号金牌服务价格LaserJet1000/1005出保一年送修U8046PE328出保一年现场,下一工作日到场U3801PE364LaserJet1010/1012/1015出保一年送修U8045PE328出保一年现场,下一工作日到场UA182PE364LaserJet1100/1150/1200/1220/1300出保一年送修U8047PE565出保一年现场,下一工作日到场H2639PE663LaserJet1160/1320, LJP2015/d/n/dn/x, LJP2014/n出保一年送修U8047PE565出保一年现场,下一工作日到场H2639PE663 LaserJet3200出保一年现场,下一工作日到场U3536PE691LaserJet3300, 3330, 3390/LJ3392出保一年送修UA186PE921出保一年现场,下一工作日到场H2649PE1101LaserJet3380出保一年送修UA186PE921出保一年现场,下一工作日到场H2649PE1101LaserJet3020/3030/3015出保一年送修UA152PE565出保一年现场,下一工作日到场U9813PE671LaserJet3050/z, LJ3052, LJ3055, 出保一年送修UA152PE565出保一年现场,下一工作日到场U9813PE671LaserJet M1005出保一年送修UH464PE565出保一年现场,下一工作日到场UH466PE671Color LaserJet CM1015 MFP, CM1017MFP出保一年送修UE666PE771出保一年现场,下一工作日到场UE668PE976 Color LaserJet 2820, 2840出保一年现场,下一工作日到场UA346PE2141 ColorLaserJet1500/l, 2500/l/n, 2550/l/n出保一年现场,下一工作日到场U2895PE919 Color LaserJet 1600, 2600/n, 2605/dn/dtn出保一年送修UC739PE1196 Color LaserJet 2700/n出保一年现场,下一工作日到场UE197PE1362 ColorLaserJet3500/n, 3700/n/tn/dtn, 3550/n出保一年现场,下一工作日到场U8039PE2156产品类型标准保修金牌服务金牌服务型号金牌服务价格ColorLaserJet 3000/n, 3600/n/dn, 3800n/dn出保一年现场,下一工作日到场U8039PE2156ColorLaserJet4700n/dn/dtn,46xx,4500/N/DN, 4550/N, CP4005n/dn出保一年现场,下一工作日到场H3183PE2544ColorLaserJet5550/dn/dtn, 5500/dn/dtn/HDN, 8550出保一年现场,下一工作日到场H3184PE3204出保一年现场,5*9,当天4小时到场U4942PE3731ColorLaserJet9500n/hdn出保一年现场,下一工作日到场U6493PE8294出保一年现场,5*9,当天4小时到场U9794PE9141LaserJet2100/n/d/dn/tn, 2200/n/d/dn/tn,2300/n/d/dn/tn,2410/d/n/dn,2430dn,2420d/n,LJP3005/d/n/dn/x出保一年送修UA185PE510出保一年现场,下一工作日到场U3792PE573 LaserJet4050/t/n/tn出保一年现场,下一工作日到场H2664PE1462 LaserJet4100/n/tn/dtn, 4200/n/tn/dtn, 4250/n/tn/dtn出保一年现场,下一工作日到场H2664PE1462 LaserJet 4350/n/dn/dtn, 5100/se/le/tn, 5200/l/n/tn/dtn出保一年现场,下一工作日到场U3472PE1462LaserJet8100 serise出保一年现场,下一工作日到场H3182PE2853 LaserJet8150n/dn出保一年现场,5*9,当天4小时到场U6398PE3321LaserJet9000base/n/dn/hns出保一年现场,下一工作日到场H7630PE5819出保一年现场,5*9,当天4小时到场U8052PE6649LaserJet 9050/n/dn, 9040/n/dn出保一年现场,下一工作日到场H7698PE7,960出保一年现场,5*9,当天4小时到场U6400PE9,008 DesignJet 90/100/120/130出保一年现场,下一工作日到场U4662PE6054 DesignJet430出保一年现场,下一工作日到场H4612PE1571 DesignJet500出保一年现场,下一工作日到场H4610PE1571 DesignJet800出保一年现场,下一工作日到场H4609PE1571 Designjet 1050/1055/4000出保一年现场,下一工作日到场H4608PE6958 DesignJet scanner 4200出保一年现场,下一工作日到场U8048PE7032产品类型标准保修金牌服务金牌服务型号金牌服务价格DesignJet5000/5500(60")出保一年现场,下一工作日到场H4607PE22765出保一年现场,5*9,当天4小时到场U4932PE32350DesignJet5000/5500 (42")出保一年现场,下一工作日到场H4607PE22765出保一年现场,5*9,当天4小时到场U4933PE32350DesignJet815MFP出保一年现场,下一工作日到场UE180PE5500出保一年现场,5*9,当天4小时到场UE182PE6626 DesignJet30出保一年现场,下一工作日到场U4661PE1216 DesignjetColorPro CAD出保一年现场,下一工作日到场H4611PE1,216 DesignJet 3500/3800出保一年现场,下一工作日到场H4606PE9129 Designjet4500出保一年现场,下一工作日到场UD640PE12,697DesignJet4500MFP出保一年现场,下一工作日到场UD897PE72,942出保一年现场,5*9,当天4小时到场UD898PE103,654DesignJet 2100出保一年现场,下一工作日到场UF028PE4115一年现场,5*9,当天4小时到场UF026PE5848DesignJet 3100出保一年现场,下一工作日到场UF046PE5314一年现场,5*9,当天4小时到场UF044PE7552Z6100-42出保一年现场,下一工作日到场H4607PE22765一年现场,5*9,当天4小时到场U4933PE32350Z6100-60出保一年现场,下一工作日到场UG738PE22765一年现场,5*9,当天4小时到场UG739PE32350T1100出保一年现场,下一工作日到场UG728PE8332一年现场,5*9,当天4小时到场UG729PE11840DesignJet 610出保一年现场,下一工作日到场UG876PE8889一年现场,5*9,当天4小时到场UG877PE12632DesignJet 8000一年现场一年现场,下一工作日到场UE166PE26600一年现场,5*9,当天4小时到场UE167PE37800产品类型标准保修金牌服务金牌服务型号金牌服务价格Business Inkjet 1000/1100/1200出保一年送修UA323PE356出保一年现场,下一工作日到场U8016PE401BIJ 2200/2230/2250/2280出保一年送修UA324PE380出保一年现场,下一工作日到场H5777PE518HP Business Inkjet 2600出保一年送修UA325PE363出保一年现场,下一工作日到场U3796PE399 ColorInkJet CP1160/1700出保一年现场,下一工作日到场U3819PE747Business InkJet 3000出保一年送修UA336PE1643出保一年现场,下一工作日到场U3526PE1823DeskJet1120/1125/1180c/1220/450c/1280出保一年送修U3521PE290一年现场,下一工作日到场U3819PE747DeskJet9300/9600/9650/9680/98**一年送修U3521PE290一年现场,下一工作日到场U3819PE747 OfficeJet 91**一年现场,下一工作日到场U9820PE372Digital sender 9200C, 9250一年现场,下一工作日到场U4660PE2,246 LaserJet4100 MFP,4345MFP, M4345x MFP出保一年现场,下一工作日到场H7688PE4580LaserJet9000MFP, 9040MFP, 9050MFP出保一年现场,下一工作日到场U2020PE33758出保一年现场,5*9,当天4小时到场U6402PE39351Color LaserJet9500MFP出保一年现场,下一工作日到场U2039PE40,657出保一年现场,5*9,当天4小时到场U6395PE45,558Colorolor LaserJet 8550 MFP出保一年现场,下一工作日到场U2039PE40,657出保一年现场,5*9,当天4小时到场U6395PE45,558Color LaserJet CM4730mfp, CM4730f MFP出保一年现场,下一工作日到场UC755PE6572 M3027MFP, M3027x MFP出保一年现场,下一工作日到场UF016PE2540出保一年现场,5*9,当天4小时到场UF014PE3907M3035MFP, M3035xs MFP出保一年现场,下一工作日到场UE696PE2781出保一年现场,5*9,当天4小时到场UE694PE4279产品类型标准保修金牌服务金牌服务型号金牌服务价格M5025MFP出保一年现场,下一工作日到场UF002PE4354出保一年现场,5*9,当天4小时到场UF003PE6698M5035MFP, M5035xs MFP出保一年现场,下一工作日到场UE679PE4958出保一年现场,5*9,当天4小时到场UE680PE7627 J7934A 网卡出保一年现场,下一工作日到场U4658PE271产品类型标准保修金牌服务金牌服务型号金牌服务价格ML110一年现场,下一工作日到场,二、三年备件更换三年现场,下一工作日到场U4433E780三年现场,5*9,当天4小时到场UH963E1045三年现场,7*24,当天4小时到场U4435E1403ML150三年现场,下一工作日到场三年现场,5*9,当天4小时到场U8172E1174三年现场,7*24,当天4小时到场U8193E1468三年现场,7*24,当天2小时响应U8177E2055DL140/DL145一年现场,下一工作日到场三年现场,下一工作日到场U9508E1968三年现场,5*9,当天4小时到场UH964E2478三年现场,7*24,当天4小时到场U9510E2784ML310一年现场,下一工作日到场三年现场,5*9,当天4小时到场U6082E3739三年现场,7*24,当天4小时到场U4447E4019DL320一年现场,下一工作日到场,二、三年备件更换三年现场,下一工作日到场U4479E904三年现场,5*9,当天4小时到场U5992E1212三年现场,7*24,当天4小时到场U4481E1547三年现场,7*24,当天2小时响应U5997E2166ML350三年现场,下一工作日到场三年现场,5*9,当天4小时到场U6112E1981三年现场,7*24,当天4小时到场U4513E2476三年现场,7*24,当天2小时响应U6117E3466三年快速修复服务(7*24小时响应,6小时备件修复)U4514E7558DL360三年现场,下一工作日到场三年现场,5*9,当天4小时到场U6007E2024三年现场,7*24,当天4小时到场U4497E2530三年现场,7*24,当天2小时响应U6012E3542三年快速修复服务(7*24小时响应,6小时备件修复)U4498E7598ML370三年现场,下一工作日到场三年现场,5*9,当天4小时到场U6127E2158三年现场,7*24,当天4小时到场U4529E2697三年现场,7*24,当天2小时响应U6132E3776三年快速修复服务(7*24小时响应,6小时备件修复)U4530E12020DL380/385三年现场,下一工作日到场三年现场,5*9,当天4小时到场U6022E2953三年现场,7*24,当天4小时到场U4545E3691三年现场,7*24,当天2小时响应U6027E5167三年快速修复服务(7*24小时响应,6小时备件修复)U4546E12020产品类型标准保修金牌服务金牌服务型号金牌服务价格ML570G3三年现场,7*24,当天4小时到场三年现场,7*24,当天2小时响应U6162E7340三年快速修复服务(7*24小时响应,6小时备件修复)U4593E22592DL580G3/DL585三年现场,7*24,当天4小时到场三年现场,7*24,当天2小时响应U6057E8050三年快速修复服务(7*24小时响应,6小时备件修复)U4609E22592Blade Enclosure三年现场,下一工作日到场三年现场,5*9,当天4小时到场UH965E1600三年现场,7*24,当天4小时到场HC032E2039三年快速修复服务(7*24小时响应,6小时备件修复)UE480E19876C7000 Blade Enclosure三年现场,下一工作日到场三年现场,5*9,当天4小时到场UH966E1600三年现场,7*24,当天4小时到场UE479E2039三年快速修复服务(7*24小时响应,6小时备件修复)UE480E19876Blade Server-P class三年现场,下一工作日到场三年现场,5*9,当天4小时到场UH967E2400三年现场,7*24,当天4小时到场UD188E3000三年快速修复服务(7*24小时响应,6小时备件修复)UE460E16090Blade Server-C class三年现场,下一工作日到场三年现场,5*9,当天4小时到场UH967E2400三年现场,7*24,当天4小时到场UE459E3000三年快速修复服务(7*24小时响应,6小时备件修复)UE460E16090 BL3*一年现场,下一工作日到场,二、三年备件维修三年现场,下一工作日到场UD186E1227DL380 Cluster三年现场,下一工作日到场三年现场,5*9,当天4小时到场U6037E6400三年现场,7*24,当天4小时到场U4561E8000DL180三年现场,下一工作日到场三年现场,5*9,当天4小时到场UH303E2106三年现场,7x24,当天4小时到场UH272E2738三年现场,7*24,当天2小时响应U6042E11200C-class Storage Blade三年现场,下一工作日到场三年现场,5*9,当天4小时到场UF252E2520三年现场,7x24,当天4小时到场UF207E3276 ProLiant Infiniband三年现场,下一工作日到场UA245E5940三年现场,5*9,当天4小时到场UH968E10938三年现场,7x24,当天4小时到场UA247E12933 DL320s三年现场,下一工作日到场UF185E1266三年现场,5*9,当天4小时到场UH969E2849三年现场,7x24,当天4小时到场UF187E3799产品类型标准保修金牌服务金牌服务型号金牌服务价格E200出保一年现场,下一工作日到场H4711PE1878一年现场,5*9,当天4小时到场H4712PE4529一年现场,7*24,当天4小时到场H4713PE5605除E200以外E系列一年现场,下一工作日到场H4561PE3030一年现场,5*9,当天4小时到场H4712PE4529一年现场,7*24,当天4小时到场H4713PE5605LC2000/r出保一年现场,下一工作日到场H4563PE4548其它LC/LP系列一年现场,5*9,当天4小时到场H4659PE4939 LP1000r/2000r一年现场,7*24,当天4小时到场H4662PE5885TC3100一年现场,下一工作日到场H4561PE3030一年现场,5*9,当天4小时到场H4712PE4529一年现场,7*24,当天4小时到场H4713PE5605LH6000/r, LT6000r出保一年现场,下一工作日到场U2085PE9762一年现场,5*9,当天4小时到场U2086PE10499一年现场,7*24,当天4小时到场U2087PE11295LH3000/r出保一年现场,下一工作日到场H4563PE4548其它LD/H/T系列一年现场,5*9,当天4小时到场H4663PE4939一年现场,7*24,当天4小时到场H4660PE5885TC4100一年现场,下一工作日到场H4563PE4548一年现场,5*9,当天4小时到场H4659PE4939一年现场,7*24,当天4小时到场H4662PE5885Lx8500出保一年现场,下一工作日到场H4564PE12143一年现场,5*9,当天4小时到场H4664PE19996一年现场,7*24,当天4小时到场H4661PE21066CPQ PL 8000出保一年现场,下一工作日到场U4775PE15256出保一年现场,5*9,当天4小时到场U4776PE15946出保一年现场,7*24,当天4小时到场U4777PE16944CPQ PL 8500出保一年现场,下一工作日到场U4771PE15256出保一年现场,5*9,当天4小时到场U4772PE15946出保一年现场,7*24,当天4小时到场U4773PE16944产品类型标准保修金牌服务金牌服务型号金牌服务价格TC2100/2110出保一年现场,下一工作日到场U3340PE2094出保一年现场,5*9,当天4小时到场U3341PE2362出保一年现场,7*24,当天4小时到场U3342PE2522TC2120出保一年现场,下一工作日到场U4440PE2094出保一年现场,5*9,当天4小时到场U4441PE2362出保一年现场,7*24,当天4小时到场U4442PE2522ML110出保一年现场,下一工作日到场UA027PE2488出保一年现场,5*9,当天4小时到场UH970PE2786出保一年现场,7*24,当天4小时到场UA029PE2965ML150出保一年现场,下一工作日到场U8188PE2488出保一年现场,5*9,当天4小时到场UH975PE2786出保一年现场,7*24,当天4小时到场U8190PE2965出保一年现场,7*24,当天2小时响应U8181PE4151DL140/DL145出保一年现场,下一工作日到场U9516PE1931出保一年现场,5*9,当天4小时到场UH971PE2187出保一年现场,7*24,当天4小时到场U9518PE2340 ML310出保一年现场,下一工作日到场U4452PE2827出保一年现场,5*9,当天4小时到场UH976PE3151出保一年现场,7*24,当天4小时到场U4454PE3345出保一年现场,7*24,当天2小时响应U6091PE4683 DL320出保一年现场,下一工作日到场U4486PE1931出保一年现场,5*9,当天4小时到场UH977PE2187出保一年现场,7*24,当天4小时到场U4488PE2340出保一年现场,7*24,当天2小时响应U6001PE3276ML330出保一年现场,下一工作日到场U4469PE2094出保一年现场,5*9,当天4小时到场UH978PE2362出保一年现场,7*24,当天4小时到场U4471PE2522出保一年现场,7*24,当天2小时响应U6106PE3531ML350出保一年现场,下一工作日到场U4518PE2958出保一年现场,5*9,当天4小时到场UH979PE3339出保一年现场,7*24,当天4小时到场U4520PE3568出保一年现场,7*24,当天2小时响应U6121PE4995出保一年快速修复服务(7*24小时响应,6小时备件修复)U4521PE10862产品类型标准保修金牌服务金牌服务型号金牌服务价格DL360出保一年现场,下一工作日到场U4502PE3650出保一年现场,5*9,当天4小时到场UH980PE4084出保一年现场,7*24,当天4小时到场U4504PE4344出保一年现场,7*24,当天2小时响应U6016PE6082出保一年快速修复服务(7*24小时响应,6小时备件修复)U4505PE10862ML370出保一年现场,下一工作日到场U4534PE4137出保一年现场,5*9,当天4小时到场UH981PE4656出保一年现场,7*24,当天4小时到场U4536PE4967出保一年现场,7*24,当天2小时响应U6136PE6954出保一年快速修复服务(7*24小时响应,6小时备件修复)U4537PE16185DL380/385出保一年现场,下一工作日到场U4550PE3935出保一年现场,5*9,当天4小时到场UH982PE4438出保一年现场,7*24,当天4小时到场U4552PE4740出保一年现场,7*24,当天2小时响应U6031PE6636出保一年快速修复服务(7*24小时响应,6小时备件修复)U4553PE16185ML530出保一年现场,下一工作日到场U4581PE10253出保一年现场,5*9,当天4小时到场UH983PE11452出保一年现场,7*24,当天4小时到场U4583PE12172出保一年现场,7*24,当天2小时响应U6151PE17041DL560出保一年现场,下一工作日到场U4703PE10427出保一年现场,5*9,当天4小时到场UH984PE11639出保一年现场,7*24,当天4小时到场U4705PE12366出保一年现场,7*24,当天2小时响应U6251PE17312ML570出保一年现场,下一工作日到场U4597PE15852出保一年现场,5*9,当天4小时到场UH985PE17513出保一年现场,7*24,当天4小时到场U4599PE18509出保一年现场,7*24,当天2小时响应U6166PE25913出保一年快速修复服务(7*24小时响应,6小时备件修复)U4600PE24731产品类型标准保修金牌服务金牌服务型号金牌服务价格DL580/585出保一年现场,下一工作日到场U4613PE12729出保一年现场,5*9,当天4小时到场UH986PE14152出保一年现场,7*24,当天4小时到场U4615PE15005出保一年现场,7*24,当天2小时响应U6061PE21007出保一年快速修复服务(7*24小时响应,6小时备件修复)U4616PE24731DL740出保一年现场,下一工作日到场U4719PE18600出保一年现场,5*9,当天4小时到场UH987PE20615出保一年现场,7*24,当天4小时到场U4721PE21824ML750出保一年现场,下一工作日到场U4645PE29434出保一年现场,5*9,当天4小时到场UH988PE32025出保一年现场,7*24,当天4小时到场U4647PE33579DL760/出保一年现场,下一工作日到场U4629PE14633出保一年现场,5*9,当天4小时到场UH989PE16441出保一年现场,7*24,当天4小时到场U4631PE17526Blade Enclosue出保一年现场,下一工作日到场HC042PE4839出保一年现场,5*9,当天4小时到场UH972PE5042出保一年现场,7*24,当天4小时到场HC044PE5348出保一年快速修复服务(7*24小时响应,6小时备件修复)UE492PE22888C7000 Blade Enclosure出保一年现场,下一工作日到场UE489PE4839出保一年现场,5*9,当天4小时到场UH973PE5042出保一年现场,7*24,当天4小时到场UE491PE5348出保一年快速修复服务(7*24小时响应,6小时备件修复)UE492PE22888Blade Server-P class出保一年现场,下一工作日到场UD198PE2208出保一年现场,5*9,当天4小时到场UH990PE2360出保一年现场,7*24,当天4小时到场HC025PE2589出保一年快速修复服务(7*24小时响应,6小时备件修复)UE472PE18528Blade Server-C class出保一年现场,下一工作日到场UE469PE2208出保一年现场,5*9,当天4小时到场UH974PE2360出保一年现场,7*24,当天4小时到场UE471PE2589出保一年快速修复服务(7*24小时响应,6小时备件修复)UE472PE18528产品类型标准保修金牌服务金牌服务型号金牌服务价格DL380 Cluster出保一年现场,下一工作日到场U4566PE14603出保一年现场,5*9,当天4小时到场UH992PE16380出保一年现场,7*24,当天4小时到场U4568PE17457出保一年现场,7*24,当天2小时响应U6046PE24440C-class Storage Blade出保一年现场,下一工作日到场UF209PE5040出保一年现场,5*9,当天4小时到场UH991PE6804出保一年现场,7x24,当天4小时到场UF211PE7560产品类型说明金牌服务金牌服务型号金牌服务价格C1556D,C5653C,C5686C,C5687A,C5687BC5687D,Q1523A,Q1523B,C6525A,C6541A,C5685C 157770-B32, 216885-B31,280129-B31,337699-B22,337699-291 DW023A, DW027A,A7569B,A7571B,337699-B31,C7503A,C7503B,A7570A,A7571A DAT 24,DAT 40,DAT24k,DAT40k, DLT VS80,DAT 2040,DLT VS80 40/80,DAT 72e,DLT VS 80,DLT VS160,DAT40, DLT VS160三年现场,下一工作日到场H3155E645三年现场,5*9,当天4小时到场H4616E859三年现场,7*24,当天4小时到场U2068E1180C5725A,C5726A,C7401A,C7401B,C7421A,C7421B,Q1509A,Q1519A,Q1520A/B,Q1517A,C7395B,C6529A,C7396B,C7400A,Q1539A,A7519B,A7519A,A7520B,A7520A C7420A,C7422B,C7515A,C7516A,C7516B,C7517A,C7518A,C7518B,Q1516A,Q1517A,Q1545A,DW017A,DW065A,DW065B,DW017B, Q1539B 146197-293,146197-B23,157767-B32,192103-292, 192103-B32,249160-001,249160-B31,257319-B31,274331-B21, 274332-B21 DLT 80i,DLT80e,Ultrium 230,Ultrium 215,Ultrium Gen2, LTO 100/200 , DLT 80k,DLT 40/80 ,DLT 4080 ,AIT 50100, SDLT 110/220,SDLT 110, AIT 100/200, SDLT 160/320, DLT 40/80,Ultrium 960,SDLT 600,Ultrium 448,Ultrium 232, Ultrium 960, Ultrium 920 , LTO448三年现场,下一工作日到场H3157E1201三年现场,5*9,当天4小时到场H4617E1562三年现场,7*24,当天4小时到场H4622E2104C1559C,C1559D, C5717B, C5717C, 166504-B21,166505-001,166505-B31 280349-B31, 292355-B31, Q1550A, Q1551A,Q1552A, Q1567A DAT24x6e, DAT40x6e, 20/40, AIT 35GB ,DAT 40x6, DAT72x6e Tape Autoloader三年现场,下一工作日到场U6360E420三年现场,5*9,当天4小时到场U6361E685三年现场,7*24,当天4小时到场U6362E1127301897-B21,301897-B22,301897-B23,301897-B24,301897-B25,301898-B21,301898-B22,330731-B21,330731-B22,330731-B23,330731-B24,330731-B25,330788-B21,330788-B22, AD606A/B,AD607A/B,AD608A/B,AD609A/B,AD581A,AD582A,AD583A,AD584A,AD585A,AD581B/C,AD582B/C,AD583B/C,AD584B/C,AD585B/C,AD597A/B,AD598A/B,AD599A/B,AD600A/B,AD601A/B 302512-B21,231891-B21,293472-B21,293472-B22,293472-B23,293472-B24,293472-B25,293473-B21,231979-B21,231821-B21,302512-B22,302511-B21,302511-B22,231892-B21,231892-B22,231822-B21,231822-B22MSL50xx, MSL60xx 三年现场,5*9,当天4小时到场U2860E6717三年现场,7*24,当天4小时到场U2861E10747。
重要提示,请认真阅读本个人应急通讯器是设计用于人员或贵重物品的定位通讯,对侵犯他人隐私的行为概不负责。
所有GPS定位相关的产品都会因外在因素产生误差,因此本机提供位置信息仅供参考。
因为电信运营商的缘故,在部分情况下,信息传送可能会延迟,本公司对使用者的人身和财产安全免责。
主要功能●GSM四频全球定位●网站平台/苹果/安卓/微信/SMS查询位置信息●轨迹回放●电子围栅●SOS求救●一键拔号●双向语音通话●静音关怀●低电量报警●换卡提示产品规格GSM频段:850/900/1800/1900MHzGPRS标准:Class12,TCP/IPGPS定位时间:冷启动30sec(开阔天空)温启动29sec(开阔天空)热启动5sec(开阔天空)GPS定位精度:10-15米(开阔天空)工作温度:-20℃~+70℃工作湿度:5%~95%RH尺寸:40.0(长)x34.0(宽)x14.0(高)毫米重量:27克配件:主机一台充电器一个USB充电线一条说明书一本产品示意编号功能编号功能1重启复位孔2开/机关键3USB充电口41号按键5GSM指示灯6SOS按键7GSM指示灯82号按键9收音孔10MicroSIM卡槽11喇叭出音孔12挂绳孔使用前准备:本产品使用GSM网络的Micro-SIM卡(iphone4同类型)。
并请注意以下事项:✓在安装或取出SIM卡前,请先关机;✓定位通讯器SIM卡需要开通GPRS和来电显示功能.开/关机请按胶塞上的指示方向插入Micro-SIM卡.按开机键3秒,指示亮灯并伴有开机铃声,开机成功.开机状态,按开机键3秒钟,指示亮灯并伴有关机铃声,则开机成功.智能手机APP绑定及功能设置1.扫描说明书封底二维码下载APP手机客户端.2.或者苹果商店搜索:anytracking3.输入10位数ID号码,初始密码为123456,即可登录.4.确认设备在线,即可进行对应的指令设置.实时追踪:实时显示设备最新的定位位置.历史轨迹:分时段查看设备的历史轨迹.电子栅栏:设置或者取消电子栅栏区域.设备消息:显示设备的报警列表.报警提醒:是否接收报警信息的APP推送.注销:退出APP程序,不再接收APP的报警推送,5.接听模式:静音模式:所有已设定的5个号码拔打RF-V16号码,,在不响铃声的状态下,远程收听RF-V16周围的声音,但不能与RF-V16使用者直接通话.自动接听模式:所有已设定的5个号码拔打RF-V16号码,在响一声铃声后,远程收听RF-V16周围的声音,并可以与RF-V16持有者直接通话.手动接听模式:任意号码拔打RF-V16号码,,必须要RF-V16持有者手动按键之后,才能与RF-V16持有者进行通话.6.短信语言设置:选择短信报警的语言种类,本产品提供三种语言模式:中文,英文及法语6.防骚扰模式:在手动接听模式下,是否允许陌生号码呼入.7.时区:出厂默认为UTC+8,如果出国使用可跟据当地时区进行设置.更多APP及平台详细功能请登录了解!RF-V16也可接受短信方式设置相关的参数.所有指令中的字母全部小写,标点为英文标点,并且都以#号为结束符.绑定SOS1号码:短信指令:密码,sos1,手机号码#例如:123456,sos1,180********#定位通讯器即回复:已设置180********为主控号码。
UC Start Kit 3 –随身电话系统3.1网络结构图3.2 客户需求1)Cisco2811路由器的G0/0做外网接口IP为100.110.1.2/29,G0/1做内网接口IP192.168.1.1/242)内网192.168.1.0网段通过PAT上Internet3)2811做EzVPN Server4)2811做CCME5)2811做语音网关(FXO连接到PSTN或企业现用的PBX),使IP电话能和PSTN电话互通6)远程用户使用IP Communicator通过VPN注册到CCME,和公司内部电话互通或PSTN互通。
3.3配置步骤3.3.1 清空2811出厂缺省配置使用console线连接设备console口进行配置缺省用户名/密码:ciscoUsername: ciscoPassword: cisco% Password expiration warning.-----------------------------------------------------------------------Cisco Router and Security Device Manager (SDM) is installed on this device andit provides the default username "cisco" for one-time use. If you have already used the username "cisco" to login to the router and your IOS image supports the "one-time" user option, then this username has already expired. You will not be able to login to the router with this username after you exit this session.It is strongly suggested that you create a new username with a privilege levelof 15 using the following command.username <myuser> privilege 15 secret 0 <mypassword>Replace <myuser> and <mypassword> with the username and password you want to use.-----------------------------------------------------------------------yourname#erase startup-config//删除nvram中的启动配置文件Erasing the nvram filesystem will remove all configuration files! Continue? [confirm] [OK]Erase of nvram: complete*Jan 5 07:28:23.843: %SYS-7-NV_BLOCK_INIT: Initialized the geometry of nvram yourname#reload//重启设备3.3.2 配置接口IP配置G0/0接口地址Router>enRouter#config tEnter configuration commands, one per line. End with CNTL/Z.Router(config)#int g0/0Router(config-if)#ip add 100.110.1.2 255.255.255.248Router(config-if)#no shut配置G0/1接口地址Router(config)#int g0/1Router(config-if)#ip add 192.168.1.1 255.255.255.0Router(config-if)#no shut配置默认路由Router(config)#ip route 0.0.0.0 0.0.0.0 100.110.1.13.3.3 配置PATRouter(config)#access-list 101 permit ip 192.168.1.0 0.0.0.255 anyRouter(config)#ip nat source list 101 interface g0/0 overloadRouter(config)#int g0/0Router(config-if)#ip nat outsideRouter(config)#int g0/1Router(config-if)#ip nat insideside3.3.4 配置VPN使用SDM图形化界面配置VPN,使用SDM前需通过CLI完成以下配置Router(config)#ip http serverRouter(config)#ip http secure-server//启用http/https服务% Generating 1024 bit RSA keys, keys will be non-exportable...[OK]Router(config)#*Jan 5 07:42:19.431: %SSH-5-ENABLED: SSH 1.99 has been enabled*Jan 5 07:42:19.595: %PKI-4-NOAUTOSAVE: Configuration was modified. Issue "write memory" to save new certificateRouter(config)#ip http authentication local//http本地认证Router(config)#username admin privilege 15 secret cisco123//http登录的用户名/密码Router(config)#line vty 0 4Router(config-line)#privilege level 15Router(config-line)#login localRouter(config-line)#transport input telnetRouter(config-line)#transport input telnet ssh//配置SSH和TelnetRouter(config-line)#exit在PC上安装SDM软件把Cisco2811包装箱中的CD放入光驱,点击Install SDM,在PC上安装SDM软件选择This Computer,在此PC上安装SDM(因为Cisco ISR路由器出厂时已安装SDM)PC网卡连接Cisco2811G0/1内网口,PC网卡IP地址配置成192.168.1.2双击桌面SDM图标,运行SDM软件,输入设备地址192.168.1.1输入用户名admin 密码cisco123(用户名密码命令行中设置的)再次输入用户名admin 密码cisco123配置EZVPN选择接口和认证组名: cisco pre-shared key: cisco地址池起止地址192.168.101.100-254(分配给VPN client用户使用)配置隧道分离Router(config)#username vpnuser password 12345678 //创建vpn用户用户名/密码在PC上安装VPN Client安装完成,重启电脑开始—程序---Cisco Systems VPN Client--VPN Client,运行VPN ClientVPN连接成功后可以看到任务栏上黄色锁型图标,右键点击此图标,查看VPN连接信息从远程用户电脑上ping 总部Cisco2811内网接口地址测试连通性VPN配置完成3.3.5 配置CCME启用电话服务设置向导Router(config)#telephony-service setupWarning: <telephony-service setup> command has been deprecated.For installation help, please check CME System Administrator Guide.--- Cisco IOS Telephony Services Setup ---根据实际情况是否使用DHCPDo you want to setup DHCP service for your IP Phones? [yes/no]: n开始电话设置向导Do you want to start telephony-service setup? [yes/no]: yConfiguring Cisco IOS Telephony Services :指定提供电话服务的IP源地址、端口、电话数量等,这里使用G0/1(LAN接口)地址,端口使用默认端口2000,10个电话Enter the IP source address for Cisco IOS Telephony Services :192.168.1.1Enter the Skinny Port for Cisco IOS Telephony Services : [2000]: 2000How many IP phones do you want to configure : [0]: 10Do you want dual-line extensions assigned to phones? [yes/no]: y选择语言What Language do you want on IP phones :0 English1 French2 German3 Russian4 Spanish5 Italian6 Dutch7 Norwegian8 Portuguese9 Danish10 Swedish11 Japanese[0]: 0Which Call Progress tone set do you want on IP phones :0 United States1 France2 Germany3 Russia4 Spain5 Italy6 Netherlands7 Norway8 Portugal9 UK10 Denmark11 Switzerland12 Sweden13 Austria14 Canada15 Japan[0]: 0设置第一个分机号为1001What is the first extension number you want to configure (maximum 32 digits): 1001 是否为所有电话启用DIDDo you have Direct-Inward-Dial service for all your phones? [yes/no]: n是否将呼叫转到语音信息Do you want to forward calls to a voice message service? [yes/no]: n是否还修改以上设置Do you wish to change any of the above information? [yes/no]: nCNF-FILES: Clock is not set or synchronized, retaining old versionStamps---- Setup completed config ---Router(config)#*Jan 7 10:42:59.834: %LINK-3-UPDOWN: Interface ephone_dsp DN 1.1, changed state to up *Jan 7 10:42:59.834: %LINK-3-UPDOWN: Interface ephone_dsp DN 1.2, changed state to up *Jan 7 10:42:59.834: %LINK-3-UPDOWN: Interface ephone_dsp DN 2.1, changed state to up *Jan 7 10:42:59.834: %LINK-3-UPDOWN: Interface ephone_dsp DN 2.2, changed state to up *Jan 7 10:42:59.834: %LINK-3-UPDOWN: Interface ephone_dsp DN 3.1, changed state to up *Jan 7 10:42:59.834: %LINK-3-UPDOWN: Interface ephone_dsp DN 3.2, changed state to up *Jan 7 10:42:59.834: %LINK-3-UPDOWN: Interface ephone_dsp DN 4.1, changed state to up *Jan 7 10:42:59.834: %LINK-3-UPDOWN: Interface ephone_dsp DN 4.2, changed state to up *Jan 7 10:42:59.834: %LINK-3-UPDOWN: Interface ephone_dsp DN 5.1, changed state to up *Jan 7 10:42:59.834: %LINK-3-UPDOWN: Interface ephone_dsp DN 5.2, changed state to up *Jan 7 10:42:59.834: %LINK-3-UPDOWN: Interface ephone_dsp DN 6.1, changed state to up *Jan 7 10:42:59.834: %LINK-3-UPDOWN: Interface ephone_dsp DN 6.2, changed state to up *Jan 7 10:42:59.834: %LINK-3-UPDOWN: Interface ephone_dsp DN 7.1, changed state to up *Jan 7 10:42:59.834: %LINK-3-UPDOWN: Interface ephone_dsp DN 7.2, changed state to up *Jan 7 10:42:59.834: %LINK-3-UPDOWN: Interface ephone_dsp DN 8.1, changed state to up *Jan 7 10:42:59.834: %LINK-3-UPDOWN: Interface ephone_dsp DN 8.2, changed state to up *Jan 7 10:42:59.834: %LINK-3-UPDOWN: Interface ephone_dsp DN 9.1, changed state to up *Jan 7 10:42:59.834: %LINK-3-UPDOWN: Interface ephone_dsp DN 9.2, changed state to up *Jan 7 10:42:59.838: %LINK-3-UPDOWN: Interface ephone_dsp DN 10.1, changed state to up *Jan 7 10:42:59.838: %LINK-3-UPDOWN: Interface ephone_dsp DN 10.2, changed state to up CNF-FILES: Clock is not set or synchronized, retaining old versionStampsCNF files update complete (post init)Router(config)#3.3.6 安装设置CIPC扬声器、麦克风设置向导设置扬声器音量设置麦克风TFTP server地址填CCME地址,即前面配置的提供电话服务的内网地址IP Communicator已经注册成功远程用户PC上安装IP Communicator(安装设置方法同上),远程用户使用VPN Client连到公司网络。