IR-88H口袋激光笔红外测温仪和口袋激光笔红外测温仪价格

Infrared thermometer KIRA Y 300 is a thermometer used to diagnose, inspect and check any temperature. Thanks to its elaborated optical system with a dual laser sighting, it allows easy and accurate measurements of little distant targets. The KIRA Y 300 instrument has an internal memory which can save up to 100 measurements. Compatible with thermocouple K probe.Make sure that the target is larger than the size of the laser sighting.DIST ANCE FROM THE TARGETKIRAY 300Infrared thermometerDistance Diameter127025403810mm 25.450.876.2mmD:S=50:150.8 mm to 2540 mmYES NOSupplied with thermocouple KprobeTECHNICAL FEA TURES●Instrument features●Thermocouple K probe features*Accuracy for an ambient temperature from 23 to 25°C (with a relative humidity lower than 80% RH)Spectral response 8 -14 µmOptical D.S : 50:1 (50.8 mm at 2540 mm) Response time 150 msTemperature range From -50 to +1850 °CAccuracy*From -50 to +20 °C : ±3 °CFrom +20 to +500 °C : ±1% ±1 °C From +500 to +1000 °C : ±1.5%From +1000 to +1850 °C : ±2%Infrared repeatability From -50 to +20 °C : ±1.5 °CFrom +20 to +1000 °C : ±0.5% or ±0.5 °C From +1000 to +1850 °C : ±1%Display resolution 0.1 C °EmissivityAdjustable from 0.10 to 1.00 (pre-set at 0.95)Over range indication Display indication : « ---- »Dual laser sighting Wavelength : from 630 nm to 670 nm Output < 1mW, Class 2 (II))Positive or negative temperature indication Automatic (no indication for a positive temperature)(-) sign for a negative temperature Display3 lines,4 digits with backlighted display LCD Auto-extinction Automatic after 7 seconds of inactivity High/low alarm Flashing signal on display and beep signal with adjustable thresholds Power supply Alkaline 9 V batteryAutonomy95 h (inactive laser and backlight)15 h (active laser and backlight)Use temperature From 0 to +10 °C for a short period From 11 to +50 °C for a long period Storage temperature From -10 °C to +60 °CRelative humidity From 10% to 90%RH in operating mode and >80%RH in storage Dimensions 200 x 140 x 50 mm Weight320 g (included battery)Memory100 temperature valuesTemperature range From -40 to +400 °C Display range From -50 to +1370 °C Resolution0.1 °CAccuracy ±1.5% of reading ±3 °C Cable length1 mBacklight, laserand recording buttonKIRA Y 300 INSTRUMENT DESCRIPTIONKIRA Y 300 INSTRUMENT BUTTONSLaser sighting output LCDbacklighted display Up button Mode buttonDown button Laser sighting outputIR sensor (infrared)Probe input Trigger (ENT)Battery compartment1 - Up button. It allows to increment emissivity and high and low alarm thresholds and to go to the following recorded value. It also allows to navigate between MAX, MIN, AVG and LOG.2 – Backlight/laser button. It allows to activate or to deactivate laser backlight of the screen.You can also saved a value.3 - Mode button. It allows to navigate through the modes (MAX and MIN values, DIF and AVG,emissivity, high and low alarms, unit of measurement).4 - Down button. It allows to decrement emissivity and high and low alarm thresholds and to go to the following recorded value. It also allows to navigate between MAX, MIN, AVG and LOG.1234MODESet emissivity (EMS)with up and down buttons.ε=OFFActivate or deactivate lock ofmeasurement with up or down buttons.MODEActivate or deactivate high alarm.MODEOFF35°CSet high alarm with up and down buttons.MODEOFF15°CMODEActivate or deactivate low alarm.Set low alarm with up and down buttons.MODE = mode button ENT = trigger●H●HL●L●MODEMODENavigate with up and down buttons between the different values.MAX/MIN/DIF/AVG/LOG ENT MODESet technical unit with up and down buttons15°CMODES FLOW CHARTMODE MAX/MIN/DIF /A VG/LOG FLOW CHARTMAX MODE ouou Display max value MINouAVG Display the average calculated onone measurement.ouDIFDisplay the difference between the MAX and MIN temperatures.ou LOG Display recorded temperatures and save a temperature with SETbutton.Display min valueENTButton to access to batteryOPERA TING MODE- Push on the ENT trigger to turn on the instrument. The backlighted screen, indicating temperature and laser, turn on.- Keep ENT pressed. Put the laser sighting at the middle of the area you want to measure.- Release ENT.- Read the displayed temperature. (Display stays activated during 7 seconds after the last manipulation).- HOLD appears at the top left of the screen ; measurement stays displayed.- Press UP or DOWN button to change technical unit.- High alarm : when KIRA Y300 instrument is turned on, press MODE until H flashes at the top of the screen to the right. Press UP or DOWN button to activate or deactivate the alarm, then press MODE to adjust the alarm threshold. Increment threshold with UP button and decrement threshold with DOWN button.To return on measurement, press ENT ;press MODE to switch to next mode.- Low alarm : when KIRA Y300 instrument is turned on, press MODE until L flashes at the top of the screen to the right. Press UP or DOWN button to activate or deactivate the alarm, then press MODE to adjust the alarm threshold. Increment threshold with UP button and decrement threshold with DOWN button.To return on measurement, press ENT ;press MODE to switch to next mode.Mode buttonIt allows to set measurement type : emissivity, lock, high alarm, low alarm, record values, etc ... by pressing as many times on this button.- EMS : when KIRA Y300 instrument is turned on, press MODE until ε=flashes. Set emissivity pressing UP button to increment it or down button to decrement it. Emissivity is pre-set on 0.95.To return on measurement, press ENT ;press MODE to switch to next mode.- Lock : when KIRA Y300 instrument is turned on, press MODE until the lock at the top of the screen flashes and OFF displays. Press UP or DOWN button to put the lock ONPress MODE to switch to the next mode, or press once ENT : the KIRA Y300 instrument takes continuous measurement. To cancel the lock, press once ENT.ENTMODE1 - Unit of measurement (°C / °F)2 - Low battery indicator3 - LOG value (recorded value), EMS (emissivity) andTK (K thermocouple probe)4 - LOG, EMS, TK indicator5 - Temperature value6 - MAX and AVG (average) indicator7 - Current measurement indicator8 - HOLD (fixed measurement) indicator9 - MAX, MIN, AVG, DIF value10 - Laser operation indicator11 - Continuous measurement indicator12 - High alarm indicator13 - Low alarm indicator14 - MIN and DIF (difference between MIN and MAX values) indicator DISPLA YCOMMAND BUTTONSTrigger- Turning on the instrument.- ENT pressed : activation of the laser sighting and of the temperature measurement.While maintaining ENT key, it is possible to change the value of the emissivity by pressing UP or DOWN.Still maintaining ENT key, it is possible to visualize the MAX, MIN, DIF, AVG values by pressing the MODE button.- ENT released : Display is on HOLD (fixed HOLD), and gives the last measurement. The screen stays on 7 seconds. If no buttons are activated and if continuous measurement is inactive, the instrument turns off after 7 seconds.- °C / °F : when KIRA Y300 instrument is turned on, press MODE until technical unit flashes at the right of the displayed value. Press UP or DOWN button to change unit : °C or °F degree.To return on measurement, press ENT ;press MODE to switch to next mode.During a measurement, the emissivity value isautomatically displayed at the bottom left of the screen.But if the thermocouple K probe is connected, themeasured value by the probe will be displayed at thebottom left of the screen.LOG : while a measurement (ENT pressed or lock activated), pressMODE until LOG appears at the bottom of the screen to the left.At the top of the screen, a number between 1 and 100 is also shown ;it is the LOG location. If nothing has been recorded 4 dashed line«----» appears while the temperature corresponding to the numberappears if a temperature has been recorded.To save a temperature, you have to be on LOG mode, then choose anempty location (---- visible) and press laser/backlight button duringmeasurement or the measurement is fixed (HOLD).From this mode, you can also clear all the recorded temperatures :press and hold the trigger and press DOWN button at the same timeuntil reach zero recording, then press laser/backlight button whilekeep ENT pressed. A beep is emitted and LOG location willautomatically change to “1”, signifying that all data locations havebeen cleared.To avoid any inconvenience:• Do not aim directly or indirectly (reflection on reflective surfaces) the laser in the eyes.• Change the batteries when the indicator blinks.• Do not use the thermometer around explosive gas, vapor or dust • Do not leave the device with the lock on (lock at the top right of the screen) because in this configuration, the instrument does not turn off automatically.To prevent damage on your instrument or equipment please carefully respect these conditions :EN 61326-1 : 2013 and EN 61326-2 : 2013This device meets with following standards' requirements.● Transport case ●User manual● Thermocouple K probe ●TripodInfrared thermometers can measure the surface temperature of an object. Its optic lens catches the energy emitted and reflected by the object. This energy is collectedand focused onto a detector. This information is displayed as temperature. The laser pointer is only used to aim at the target.N T a n g - K I R A Y 300 – 29/10/18 - R C S (24) P ér i g u e u x 349 282095 N o n -c o n t r a c t u a l d o c u m e n t - W e r e s e r v e t h e r i g h t t o m o d i f y t h e c h a r a c t e r i s ti c s o f o u r p r o d u c t s w i t h o u t p r i o r n o t i c e .CE CERTIFICA TIONTo install or change the 9V battery, open the part near the trigger and put it in the battery compartment..ACCESSORIESLaser sightingInfrared sensorEmitted energy by the object in the form of radiationEMISSIVITYEmissivity is a term used to describe the energy-emitting characteristics of materials.Most (90% of typical applications) organic materials and painted or oxidized surfaces have an emissivity of 0.95 (pre-set in the unit). Inaccurate readings will result from measuring shiny or polished metal surfaces. To compensate; cover the surface to be measured with masking tape or flat black paint. Allow time for the tape to reach the same temperature as the material underneath it. Measure the temperature of the tape or painted surface.See table below for values of emissivity of specific materials : IMPORT ANT INFORMA TIONFor correct measurements :• Do not take any measurement on metal or shiny or reflective surfaces.• Do not measure through transparent surfaces such as glass, for example.• Water vapor, dust, smoke, etc ... may prevent correctmeasurements because they obstruct the optical of the instrument.• Make sure that the target is larger than the size of the aiming point of laser.nonA pro tég er d es ch am p s électriq u es et m ag n étiq u es et d e l'électricité statiq u e To protect from electric and magnetic fields of static electricityProtect from thermalshockMAINTENANCEInfrared thermometer, how does it work?Once returned, required waste collection will be assured in the respect of the environment in accordance to 2002/96/CE guidelines relating to WEEE.Aluminium 0.30Asbestos 0.95Asphalt 0.95Basalt 0.70Brass 0.50Brick 0.90Carbon 0.85Ceramic 0.95Concrete 0.95Copper 0.95Dirt0.94Frozen food 0.90Hot food 0.93Glass 0.85Water 0.93Fresh foodstuffs between 0 and 5 °C0.90Ice 0.98Iron 0.70Lead 0.50Limestone 0.98Oil 0.94Paint 0.93Paper 0.95Plastic 0.95Rubber 0.95Sand 0.90Skin0.98Snow 0.90Steel 0.80Textile 0.94Wood 0.94。

用户手册双激光红外 (IR) 测温仪型号 42570简介恭喜您购买 42570 型红外测温仪。

该型红外测温仪可采用非接触式技术来测量和显示温度，可测温度高达 3992°F/2200°C（经认证的测温上限为 2000°F/1100°C）。

其内置双激光笔可从 50 英寸的距离处汇聚成直径为 1 英寸的光斑，以准确锁定目标，方便测温。

这款测温仪提供 USB PC 接口和软件、100 毫秒响应时间、最高/最低/平均/差值显示、可调整发射率和高温/低温报警等多项高级功能。

正确并小心使用此仪表，您便可常年享受其可靠服务。

安全∙启用激光笔后，应保持高度警惕∙不要将激光束指向任何人的眼睛，或让激光束从反射面照射眼睛∙不要在爆炸性气体附近或其他潜在爆炸区使用此激光束仪表描述1. 红外传感器和激光笔2. LCD 显示屏3. 向下按钮4. 测量扳机5. MODE 按钮6. 电池仓7. 背光/激光笔按钮8. 向上按钮9. K 型热电偶输入（侧面）10. USB 端口（侧面）显示屏1. SCAN，表示正在测量2. 条形刻度3. 激光笔启用4. 自动关闭锁定功能开5. HOLD，表示锁定并显示上一次测量值6. 最高/最低温度显示或存储位置显示7. 主温度显示区8. 高温/低温报警9. USB 连接10. 电池状态11. 发射率或 K 型或存储值显示12. 已安装热电偶探针13. 发射率设置14. 已记录内存操作说明红外测温1. 握住仪表的手柄，将其朝向待测量表面。

2. 扣住扳机，打开仪表并开始测试。

大显示屏上将出现“SCAN”图标和温度读数。

上方和下方的副显示屏将显示以前使用的值/设置。

3. 松开扳机，读数将持续显示约 7 秒（LCD 显示屏上将出现“HOLD”图标），随后仪表自动关闭。

唯一例外情形即锁定开关（“LOCK”模式处于“ON”位置）打开时。

MODE 按钮的功能选项扣动扳机后（显示“SCAN”），按 MODE 按钮可查看并滚动显示：MAX： 最高测量值MIN： 最低测量值DIF： Max 与 Min 之间的差值AVG： 测量值的平均值LOG： 上方的小显示屏显示存储位置，下方的小显示屏显示存储在这一位置的值。

••••••••••••ISQ 5-LO双色、数字、固定式光纤型非接触测温仪，测温范围７００．．．２５００℃小目标测温，最小０．４５ｍｍ●宽泛的测温范围●激光瞄准模拟输出０－２０ｍＡ或４－２０ｍＡ数字接口ＲＳ２３２或ＲＳ４８５峰值存储功能光纤及光纤头可耐２５０Ｃ高温耐用光纤最长可用３０米●●●●●●ＩＳＱ５－ＬＯ是一款双色、数字、非接触的高精度光纤型红外测温仪。

ＩＳＱ５－ＬＯ采用双色技术，根据两个相邻的波段测得的能量的比值计算物体表面温度值。

双色相对单色而言具有如下优点：测试温度与被测物体发射率无关测温的过程在很大程度上不受辐射率的影响．测量目标可以小于最小光斑尺寸测量值不受视野范围内的灰尘及其他污物或污染的窗口的影响．此外这款测温仪也可以调整到单色测温模式，作为工作波长０．９ｕｍ普通测温仪使用．ＩＳＱ５－ＬＯ带有一根光纤和一个可更换的光纤头．光纤及光学镜头无需制冷即可在２５０℃的高温下使用，且测温时不受电磁干扰（比如感应加热）的影响．诸如坡度、响应时间、模拟输出等重要参数可直接在仪器上设置。

另外在联机情况下也可通过软件对仪器的参数做进一步调整．通过软件亦可实时显示并存储温度数据．典型应用感应加热回转炉窑退火锻造熔结焊接烧结轧钢浇铸在线 / 离线响应时间激光瞄准按键发射率坡度模拟输出 0 or 4 ... 20 mA 带色彩标识光缆电缆接头Technical Data细节说明可选: ISQ 5-LO-C, 集成PID控制器的特别版本ISQ 5-LO-C 配置 PID 控制器。

可自动控制和监视过程温度。

控制器将当前的测量温度与目标温度进行比较，计算控制信号并给出0或4至20 mA 的输出信号（非温度信号）。

控制器反应速度非常快，按照高温计响应时间（<10 ms ）更新信号。

控制器内置的自整定算法可以自动确定控制部分P ，I 和D 的近似值。

激活或关闭控制器并设定相应参数既可通过软件实现亦可通过 HT 6000便携式参数调整装置或者 DA 6000 和 DA 6000-N 型数显表实现测温范围:700 - 1800°C (MB 18) 800 - 2500°C (MB 25)子温度范围:测温范围内任意区间，最小跨度51°C工作波长: 波长 1: 0.7 ... 1.15 µm; 波长 2: 0.97 ... 1.15 µm 供电:24 V DC ± 25%, stabilised, ripple < 50 mV 最大负载: ≤3 VA (incl. active laser targeting light)模拟输出:0 - 20 mA 或 4 - 20 mA, 可切换, 线性输出。

上海松江飞繁电子有限公司
（原上海市松江电子仪器厂）
产品价格表
说明：
（1）、本厂在2010年1月1日之前发布的所有价格表，均自本价格表执行之日起废止。

（2）、若有不详之处，请与本厂驻当地办事处联络。

本厂保有对本价格表的最张解释权。

注：JB-3208型火灾报警控制器最大配置为72个回路（18000点）大于4788点的报警控制器由市场部定价
每超16回路需另回路电源一套
主机含24V联动电源1套，如需增加根据用户的需要另外购置建议主机容量少于48回路另购置机箱2～3个为合理，
48回路至72回路则另购置机箱3～4个为合理，
序号为★的产品为合同最终结算价，不再优惠
上海松江飞繁电子有限公司
（原上海市松江电子仪器厂）
外购产品价格表
说明：
（1）、本厂在2010年1月1日之前发布的所有价格表，均自本价格表执行之日起废止。

（2）、若有不详之处，请与本厂驻当地办事处联络。

本厂保有对本价格表的最张解释权。

2009年12月1日发布
二、工业用消防产品
注：（1）可供货的防爆型特殊气种可燃气体探测器的气种如下（括号内为其分子式）：苯[C6H6]、甲苯[C6H5CH3]、二甲苯[C6H4(CH3)2]、丙酮[CH3COCH3]、甲醇[CH3OH]、
甲烷[CH4]、乙醇[CH3 CH2OH]、丙烷[CH3 CH2 CH3]、氢气[H2]、汽油、煤油及柴油的挥发气；
795
721
658
583
658
552 1250 4770 10500 10200 29.8 48.8
69
83
101。

紫图T5000H双面A4高速扫描仪 每分钟40页/80面价格科密（COMET）YX-38 条码扫描器 （有线激光扫描） 黑色价格科密（COMET）YX-28 条码扫描器 （有线激光扫描） 黑色价格佳能（Canon）CanoScan LiDE210 扫描仪价格佳能（Canon） CanoScan 9000F MarkII 扫描仪价格佳能扫描仪 Lide210 平板式扫描仪价格佳能扫描仪 Lide110 平板式扫描仪 价格科密（COMET）CP-1000 支票打印机价格科密（COMET）CP-2000 支票打印机价格准星支票打印机价格普霖PR-04A 自动支票打字机价格普霖 PR-03 自动支票打字机价格齐心（COMIX）OP300A 免安装直输报表型指纹机价格齐心（COMIX）OP330C 免安装直输报表彩屏指纹机价格科密C72指纹考勤机价格科密X3指纹考勤机价格科密W30指纹考勤机价格科密W20指纹考勤机价格科密W60指纹考勤机价格科密W50指纹考勤机价格惠普DesignjetZ5200绘图仪价格美的微波炉 MM721NG1-PW价格格兰仕微波炉 P70D20TP-C6价格美的微波炉 EG823MF4-NA价格格莱德全钢电热水壶 WKF-9301G 1.2L价格格莱德电热水壶 WKF-D215 1.5L价格格莱德不锈钢电热水壶 WKF-9301 1.2L 1000W价格德龙 电摩卡 EMK6 600ml 银色价格德龙 电摩卡 EMKE43.R 600ml 红色价格美的（midea）单热型饮水机 MYR718S-X价格美的(midea) MYD718S-X 电子制冷饮水机价格美的 (Midea) 饮水机 MYR927S-W价格美的净水桶MU-3(960CB)价格美的 (Midea) 电子制冷 饮水机 MYD927S-W价格美的 (Midea) 饮水机 MYR926S-W价格深安立式冷热饮水机 36LD-SC/A011价格美的立式冷热饮水机 MYD718S-X价格安吉尔台式冷热饮水机 Y1052TKD价格安吉尔 立式冷热饮水机 Y1038LKD-C价格齐心（COMIX）L602 USB全金属4寸迷你静音桌面小风扇 黑色价格z艾美特落地扇 F40A-G价格美的落地扇 FS40-11L价格美的落地扇 FS40-12FR（摇控）价格美的台式转页扇 KYT5-30价格美的空调扇 AC200-B价格美的空调扇 AC120-G价格森睿除湿机 CH-936E价格川岛除湿机 DH-818C价格活仕除湿机 WDF-12BD价格飞利浦多媒体耳机 SHM7410U （头戴式） 黑灰色价格大行(ASiNG)S-1001扩音器 教学、导游扩音器（蓝色）价格大行(ASiNG)S-1001扩音器 教学、导游扩音器（黑色）价格大行（ASiNG） s1017 扩音器 时间显示/教学/导游/演讲 多个首创功能(草绿)价格电音多媒体耳机 DT-385S （头戴式） 黑色价格电音多媒体耳机 DT-385S （头戴式） 白色价格得胜扩音器 E188M价格貂王 MC-110迷你小音箱价格冲击波 SU-206迷你小音箱价格樱花 1000迷你小音箱价格360官方出品 360随身WiFi 2 （设置超简单，超便捷的无线路由器） 白色价格闪迪优盘 CZ48 16GB 黑色价格闪迪优盘 CZ48 32GB 黑色价格闪迪优盘 CZ48 64GB 黑色价格金士顿 DataTraveler 101G2 4G价格金士顿 DataTraveler 101G2 8G价格金士顿 DataTraveler 101G2 16G价格金士顿 DataTraveler 101G2 32G价格金士顿优盘 DT101 G2 8GB 旋转式 红色价格金士顿优盘 DT101 G2 16GB 旋转式 黑色价格金士顿优盘 DT101 G2 32GB 旋转式 紫色价格金士顿优盘 DTSE9 8GB超薄 银色价格金士顿优盘 DTSE9 16GB 超薄 银色价格金士顿优盘 DTSE9 32GB 超薄 银色价格金士顿优盘 DTIG4 16G USB 3.0接口价格金士顿优盘 DTIG4 32G USB 3.0接口价格金士顿优盘 DTIG4 64G USB 3.0接口价格朗科 简约时尚型U208(4G)价格朗科 简约时尚型U208(8G)价格朗科 简约时尚型U208(16G)价格朗科 简约时尚型U208(32G)价格爱国者 迷你王商务型L8202(4G)价格爱国者 迷你王商务型L8202(8G)价格爱国者 迷你王商务型L8202(16G)价格芒果ID卡 AB0002价格sony DVD-R价格sony DVD-R 十片装 （价格为单片）价格SONY CD-R (单片装)/片价格SONY CD-RW (单片装)/片价格SONY CD-R (10片筒装)价格SONY CD-R (50片筒装)价格SONY DVD-R 单片装（片）价格SONY DVD-RW 单片装（片）价格现代（HYUNDAI）M103鼠标 黑色价格双飞燕（A4TECH）WG-100 天遥系列针光无线鼠 黑色价格双飞燕（A4TECH）绝尘高精无孔鼠 D-557FX 璀璨星光价格双飞燕（A4TECH）G3-260N 针光无线鼠 绅士哑黑价格双飞燕有线鼠标 OP-520 USB 黑色价格罗技（Logitech）M90 有线鼠标 黑色价格罗技（Logitech）M100r 光电鼠标 （黑色）价格罗技（Logitech）M100r 光电鼠标 （白色） 价格罗技（Logitech）M105 鼠标（清新白）价格罗技（Logitech）M105 鼠标（活力蓝）价格罗技（Logitech） M105 鼠标 白色价格罗技（Logitech） M105 鼠标 黑色价格罗技（Logitech）M185 无线鼠标 黑色灰边价格罗技（Logitech）M185 无线鼠标 黑色红边价格罗技（Logitech）M185 无线鼠标 黑色蓝边价格罗技有线鼠标 M90 USB 黑色价格罗技有线鼠标 M100R USB 混色价格罗技无线光学鼠标 M185 灰色价格罗技有线键鼠套装 MK100 键盘PS/2 鼠标USB 价格现代（HYUNDAI）M103鼠标 红色价格现代（HYUNDAI）M103鼠标 蓝色价格现代（HYUNDAI）HY-M109 USB光电鼠标价格现代（HYUNDAI）HY-M306光电鼠标 白色价格现代（HYUNDAI）HY-M306光电鼠标 黑色价格现代（HYUNDAI）HY-M306光电鼠标 红色价格现代（HYUNDAI）HY-N11 2.4G无线鼠标价格现代（HYUNDAI）HY-N22 10m长距离接收无线鼠标价格双飞燕有线键盘 KR-6A PS/2 价格双飞燕有线键盘 KR-85 PS/2 价格双飞燕有线键盘 KB-8 USB 价格双飞燕有线键鼠套装 KB-5520N PS2 价格双飞燕有线键鼠套装 KR-8572 PS/2 价格罗技有线键鼠套装 MK200 USB 价格惠普 彩色 861#/CB337ZZ价格惠普 彩色 C6578DA价格惠普 彩色 HP51645AA价格惠普 彩色 C6656A价格惠普 彩色 C6657AA价格惠普 彩色 C8728AA价格惠普 彩色 HPC8727AA价格惠普 黑色 C8765ZZ价格惠普 彩色 C8766/855价格惠普 彩色 C9363/857价格惠普 黑色 C8767Z/853价格惠普 黑色 C8816AA价格惠普 彩色 C8817AA价格惠普 彩色 CC643ZZ/818价格惠普 黑色 CC640ZZ/818价格惠普 彩色 CC656AA/901价格三星 黑色 M40价格EPSON-T04x 黑色墨盒 T0461价格EPSON-T04x 彩色墨盒系列价格兄弟墨盒 黑色 LC950BK价格兄弟墨盒 彩色：蓝色，红色，黄色价格联想墨盒 黑色 LC6001B+H(双包装)价格联想墨盒 彩色 LC6002C价格惠普硒鼓 Q7553A价格惠普硒鼓 CC388A价格惠普硒鼓 Q2612A价格惠普硒鼓 Q2613A价格惠普硒鼓 Ce278价格惠普硒鼓 CE505A价格惠普硒鼓Q6000系列 黑色（Q6000A ）价格惠普硒鼓Q6000系列 彩色（青色、黄色、红色）价格映美色带架 JMR101 (用于530K/KII540K/580/590/230/330) 价格三星硒鼓 SCX-4521D3价格三星硒鼓 ML-2150D8 黑色价格三星硒鼓 SCX-D4725A价格SANSUNG (ML1710)价格SANSUNG (ML1210)价格理光复印机碳粉 1610D价格理光复印机碳粉 2220D价格理光复印机碳粉 1220D价格佳能硒鼓 传真机W鼓价格佳能硒鼓 E16价格佳能硒鼓 FX3价格佳能硒鼓 FX-9价格佳能硒鼓 303/LBP2900价格佳能硒鼓 CRG-308 黑色价格佳能硒鼓 Ep22 原装（鼓粉一起）黑色价格佳能复印机粉盒 G-20价格佳能复印机粉盒 NPG-28价格兄弟硒鼓 硒鼓（DR-2050)价格兄弟硒鼓 墨粉盒（TN-2050)价格兄弟硒鼓 墨粉盒（TN-2115)价格兄弟硒鼓 DR-2150价格联想硒鼓 Lt2922/粉盒价格联想硒鼓 Lt2020价格齐心（COMIX）T168 大按键超值电话机 白色价格齐心（COMIX）T128 超大屏录音王商务电话机价格飞利浦（PHILIPS） TD-2808 来电显示电话机（白色）价格飞利浦（PHILIPS） TD-2808 来电显示电话机（黑色）价格飞利浦（PHILIPS）CORD 040来电显示电话机（白色）价格飞利浦（PHILIPS）CORD 040来电显示电话机（蓝色）价格飞利浦（PHILIPS）CORD 042来电显示电话机（白色）价格飞利浦（PHILIPS）TD-2816D来电显示电话机（白色）价格飞利浦（PHILIPS）CORD 042来电显示电话机（蓝色）价格飞利浦（PHILIPS） CORD118大屏幕，免电池工作 来电显示电话机 白色价格飞利浦（PHILIPS） CORD118大屏幕，免电池工作 来电显示电话机 黑色价格飞利浦（PHILIPS）TD-2816D来电显示电话机（蓝色）价格飞利浦（PHILIPS）TD2815D来电显示电话机（白色）价格飞利浦（PHILIPS） CORD108 来电显示电话机（白色）价格飞利浦（PHILIPS） CORD108 来电显示电话机（黑色）价格飞利浦（PHILIPS）TD2815D来电显示电话机（蓝色）价格飞利浦（PHILIPS) TD2801 有绳电话机 可挂墙不带来电显示 （白）价格飞利浦（PHILIPS) TD2801 有绳电话机 可挂墙不带来电显示 （黑色）价格飞利浦电话机 CORD-040 白色价格飞利浦电话机 CORD-118 黑色价格飞利浦电话机 CORD-042 白色价格飞利浦无绳子母电话机 TD-6816A 白色价格x北恩话务员耳机 VF-560 座机 耳机 价格北恩话务机 DT60 价格西门子 5020 来电显示办公电话机价格德信HCD8588TSD电话机价格中诺 (CHINO-E)C028价格中诺（CHINO-E）C168来电显示电话机（灰白色）价格中诺（CHINO-E）C168来电显示电话机（红色）价格中诺 C228 来电显示电话机（黑色）价格中诺 C228 来电显示电话机（白色）价格中诺 C228 来电显示电话机（蓝色）价格中诺 C228 来电显示电话机（红色）价格中诺（CHINO-E） C229 来电显示电话机 白色价格中诺（CHINO-E）G015来电显示电话机（黑色）价格中诺（CHINO-E） G015 来电显示电话机 白色价格中诺来电显示电话机 HCD6138（20）C044 灰白色价格中诺来电显示电话机 C168 灰白价格中诺有绳电话机 C-229 白色价格中诺来电显示电话机 HCD6138(20)C028 灰白价格中诺来电显示电话机 HCD6138（20）24 灰白色价格中诺来电显示电话机 HCD6138（20）C052 白色价格中诺电话机 C131 白色价格中诺多功能电话机（耳麦接听功能） C301 价格中诺商务电话机 G056 黑色价格步步高普通电话机 HCD007（6082）TSDL 白色价格步步高来电显示电话机 HCD007(6033)TSDL 白色价格TCL HA868（9A）普通按键电话机（米白）价格TCL HA868(9A) 普通按键电话机(冰蓝)价格TCL HCD868(131)TSD 来电显示电话机（灰白色）价格TCL HCD868(17B)TSD 来电显示电话 （火红）价格TCL HCD868（37） 来电显示电话机（米白）价格TCL HCD868(37)TSD 来电显示 (黑色)价格TCL HCD868(131)TSD 来电显示电话机 蓝黑色价格TCL HCD868（79） 来电显示电话机（黑色）价格TCL HCD868（79） 来电显示电话机（灰白）价格TCL HCD868（17B） 来电显示电话机（灰白）价格TCL HA868（32）P/T 普通按键电话（白色）价格TCL HCD868(210)TSD来电显示电话 （雅致白）价格TCL HCD868(201)TSD来电显示电话机（雅致白）价格TCL HCD868（201）TSD 来电显示电话机 （火红）价格TCL HCD868(201)TSD 来电显示电话机 （深灰）价格TCL来电显示电话机 HCD868（203）TSD 白色价格TCL来电显示电话机 HCD868（206）TSD 雅白价格TCL无绳子母电话机 HWCD868(16A)TSD 白色价格摩托罗拉SMP商务对讲机 SMP818 118*58*21mm 0.205KG 黑色价格¥9,800.00其他¥233.40科密¥175.90科密¥1,207.50佳能¥2,613.90佳能¥1,207.50佳能¥423.20佳能¥1,248.90科密¥1,914.70科密¥2,778.40准星¥2,427.60普霖¥677.30普霖¥591.10齐心¥718.70齐心¥1,523.70科密¥794.60科密¥1,145.40科密¥1,028.10科密¥794.60科密¥1,307.50科密¥0.00惠普¥460.00其他¥454.20其他¥977.503M¥86.20其他¥138.00其他¥86.20其他¥1,265.00其他¥1,472.00其他¥326.60其他¥442.70其他¥442.70其他¥489.90其他¥501.40其他¥583.00其他¥212.70其他¥431.20其他¥437.00其他¥517.50其他¥21.80齐心¥293.30其他¥195.50其他¥343.80其他¥166.80其他¥828.00其他¥573.80其他¥2,298.90其他¥1,782.50其他¥2,298.90其他¥149.50飞利浦¥144.90其他¥144.90其他¥222.00其他¥32.20其他¥32.20其他¥207.00其他¥77.00貂王¥87.60冲击波¥75.90冲击波¥29.20其他¥78.20其他¥148.30其他¥308.20其他¥75.90金士顿¥123.00金士顿¥228.90金士顿¥525.50金士顿¥46.00金士顿¥69.00金士顿¥112.70金士顿¥46.00金士顿¥69.00金士顿¥112.70金士顿¥74.70金士顿¥135.70金士顿¥270.30金士顿¥87.60朗科¥153.00朗科¥327.80朗科¥817.60朗科¥123.00爱国者¥223.10爱国者¥386.40爱国者¥2.10其他¥3.10Sony¥3.70Sony¥5.40Sony¥13.80Sony¥23.30Sony ¥112.70Sony ¥7.90Sony ¥10.70Sony ¥31.60其他¥80.00双飞燕¥80.00双飞燕¥80.00双飞燕¥47.10双飞燕¥50.30罗技¥64.30罗技¥62.00罗技¥67.80罗技¥67.80罗技¥67.80罗技¥67.80罗技¥85.30罗技¥88.80罗技¥87.60罗技¥51.70罗技¥56.30罗技¥90.80罗技¥101.20罗技¥31.60现代¥31.60现代¥31.60现代¥38.60现代¥38.60现代¥40.90现代¥57.30现代¥57.30现代¥54.00双飞燕¥51.70双飞燕¥63.20双飞燕¥86.20双飞燕¥93.10双飞燕¥135.70罗技¥169.00惠普¥223.10惠普¥232.30惠普¥156.40惠普¥233.40惠普¥172.50惠普¥142.60惠普¥197.80惠普¥228.90惠普¥316.30惠普¥288.70惠普¥174.80惠普¥209.30惠普¥164.50惠普¥162.10惠普¥222.00惠普¥319.70惠普¥111.80爱普生C63/C65/CX3500寿命（5%覆盖率）：540页¥73.60爱普生C63/C65/CX3500寿命（5%覆盖率）：250页¥193.20兄弟¥91.10兄弟¥415.20联想¥241.50联想¥677.30惠普¥549.70惠普¥524.40惠普¥625.60惠普¥690.00惠普¥923.40惠普¥748.60惠普¥724.50惠普¥17.20其他¥724.50三星¥1,343.20三星¥899.30三星¥361.10三星¥361.10三星¥170.20理光¥350.80理光¥409.40理光¥678.50佳能¥617.50佳能¥553.10佳能¥555.40佳能¥572.70佳能¥549.70佳能¥245.00佳能¥269.10佳能¥806.10兄弟¥420.90兄弟¥325.40兄弟¥929.20兄弟¥327.80联想¥504.80联想¥65.80齐心¥487.60齐心¥87.30飞利浦¥87.30飞利浦¥90.80飞利浦¥93.10飞利浦¥93.10飞利浦¥100.40飞利浦¥102.20飞利浦¥104.30飞利浦¥104.30飞利浦¥105.30飞利浦¥105.30飞利浦¥109.30飞利浦¥109.30飞利浦¥110.40飞利浦¥114.40飞利浦¥114.40飞利浦¥89.70飞利浦¥101.20飞利浦¥97.70飞利浦¥285.20飞利浦¥287.50其他¥239.20其他¥383.00西门子¥77.60德信¥52.30中诺¥46.60中诺¥46.60中诺¥53.80中诺¥53.80中诺¥53.80中诺¥53.80中诺¥57.40中诺¥58.60中诺¥58.60中诺¥43.70中诺¥51.70中诺¥47.10中诺¥48.30中诺¥59.80中诺¥64.40中诺¥66.70中诺¥66.70中诺¥86.20步步高¥94.30步步高¥58.60TCL ¥58.60TCL ¥58.60TCL ¥62.60TCL ¥65.80TCL ¥65.80TCL ¥65.80TCL ¥70.60TCL ¥68.20TCL ¥70.60TCL ¥70.60TCL ¥81.30TCL ¥82.60TCL ¥82.60TCL ¥82.60TCL ¥86.20TCL ¥97.70TCL ¥247.20TCL ¥754.40摩托罗拉。

U ser’Shop onlineate-mail:**************For latest productmanuals:OS880 SeriesEssential Handheld Infrared Thermometer **************Servicing North America:Omega Engineering, Inc.800 Connecticut Ave. Suite 5N01, Norwalk, CT 06854 Toll-Free: 1-800-826-6342 (USA & Canada only)Customer Service: 1-800-622-2378 (USA & Canada only) Engineering Service: 1-800-872-9436 (USA & Canada only) U.S.A.Headquarters:Tel: (203) 359-1660 e-mail:**************Fax: (203) 359-7700 The information contained in this document is believed to be correct, but OMEGA accepts no liability for any errors it contains and reserves the right toTable of Contents (3)1)Introduction (4)1.1 How it works (4)1.2 Caution (5)2)Specifications (6)3)Operating Instructions (6)3.1 Battery Installation: (6)3.2 Button and key Layout: (7)3.3 Locating a Hotspot: (8)4)Maintenance (8)The OS880-Series handheld infrared thermometer is a non-contact temperature sensing thermometer. It measures from -30 to 550°C (-22 to 1022°F). This thermometer features a backlit display which is automatically illuminated when the trigger is pulled and allows working in poor or zero-lighting conditions. The single laser is also automatically active when the trigger is pulled. The laser is located above the IR sensor to locate the center of the area being measured. The meter constantly updates the temperature measurement as long as the trigger is held in and will “hold” on the last temperature seen when the trigger is released. The OS880-Series has adjustable emissivity, min, max, and averaging functions, as well as high and low alarm capability. This safely measures surface temperatures of hot, hazardous or hard-to-reach objects without contact.1.1 How it worksThis handheld infrared thermometer measures the surface temperature of an object. The unit’s optics sense emitted, reflected, and transmitted energy which is collected and focused onto a detector. The unit’s electronics converts the energy value into a temperature in °C or °F which is displayed on the digital display. A clean line of sight free of dust or mist is needed between the sensor and the object. For increased ease of use and accuracy the laser pointer makes aiming even more precise.Measurement:When taking measurement, point the thermometer toward the object to be measured and hold the trigger. The temperature will be displayed along with the word “Scan” to indicate that the temperature is constantly being updated on the display. When the trigger is released, the last reading seen will be held on the display. The object under test should be larger than the spot size calculated by the field of view diagram below.Field of View:Field of view, or distance to spot ratio, is the size of an area that can be measured from a specified distance. As the distance from the object increases, the spot size of the measuring area becomes larger. Make sure the target is larger than the unit’s spot size. When accuracy is critical, ensure that the target is at least twice as large as the spot size. Please see field of view diagram for the OS880-Series below.Emissivity:Most organic materials and painted or oxidized surfaces have an emissivity of 0.95 (pre-set in the unit). Inaccurate readings will result from measuring shiny or polished metal surfaces. To compensate, cover the measured surface with masking tape or flat black paint. Measure the tape or painted surface when the tape or painted surface reaches the materialEmissivity Table:1.2 CautionInfrared thermometer should be protected for the following:-EMF (electro-magnetic fields) from arc welders and induction heaters.-Thermal shock (caused by large or abrupt ambient temperature changes allow 30 minutes for unit to stabilize before use).-Do not leave the unit on or near objects of high temperature.Warning: Do not point laser directly at eye or indirectly off reflective surfaces!3.1 Battery Installation:Use the thumb and forefinger to pull on the finger grips on either side of the trigger of the thermometer (Figure 1). The battery compartment door will swing down (Figure 2). Insert a 9 Volt alkaline battery into the battery holder (Figure 3). Take care not to pinch the battery wires when closing the battery door back to its original position.Figure 1 Figure 2 Figure 3 Temperature Range -30 to 550°C (-22 to 1022°F)Accuracy ±3°C or ±3% of rdg, -30°C to 0°C (-22 to 32°F)±2°C or ±2% of rdg, 0°C to 100°C (32 to 212°F)±3°C or ±3% of rdg, ≥100°C (212°F)Field of View 12:1Repeatability 1% of reading or 1°CResponse Time 500 ms (95% response)Spectral Response 8 – 14 µmEmissivity Adjustable from 0.1 to 1.0Operating TemperatureRange0 - 40°C (32 - 104°F)Relative Humidity 10 -95% RHStorage Temperature -20 - 60°C (-4 - 140°F)Weight 130 g (4.58 oz) without batteryDimensions 5.74 x 3.14 x 1.49 in (146 x 80 x 38 mm)Power 9V BatteryEstimated Battery Life 12 hours (using laser)[GrabOperating instructions3.2 Button and key Layout:1) Trigger2) Back light/Up Button 3) Mode button 4) T/Down Button 5) SET Button 6) LCD Display 7) Battery Door 8) Laser Button3.3 Operating Steps1) Hold the thermometer by the handle grip and point it towards the surface to be measured.2) Pull and hold the trigger to turn the thermometer on. The “SCAN” icon will appear on the top line of the display. 3) The surface temperature being measured will be displayed on the LCD screen.4) When the trigger is released, the “HOLD” icon will appear and the last reading seen will remain on the display screen. 5) The thermometer will automatically turn off after 7 seconds of inactivity.3.4 Button function3.4.1 Mode Selection1) With trigger held, press the “MODE” button [3] to cycle through the different modes. a. “AVG” displays average temperature reading seen during the session. b. “MAX” displays maximum temperature reading seen during session. c. “MIN” displays minimum temperature reading seen during session. d. “HAL” shows High Alarm value (use UP and DN buttons to adjust up or down).e. “LAL” shows Low Alarm value (use UP and DN buttons to adjust up or down).3.4.2 Changing Temperature Units1) With trigger [1] held and “SCAN” shown on display, press “T/DN” [4] to toggle between °C and °F. 1765 43283.4.3 Adjusting Laser1) While holding the trigger and “SCAN” activated on display, press the “Laser” button [8] totoggle the single laser dot on and off.3.4.4 Adjusting Emissivity1) With unit turned “on”, press the “MODE” button [3] a few times to get to the “Є” annunciatorwhich will show the current Emissivity value.2) Press the Backlight/UP button [2] to increase value and the “T/DN” button [4] to decrease value.3) When desired value is reached, press “SET” again to lock in the value.3.4.5 Adjusting High/Low Alarm1) With trigger held and “SCAN” activated on the display, press the “Mode” button [3] one pressa time to get to “LAL” (low alarm) or “HAL” (high alarm) annunciator.2) Press the Backlight/UP button [2] to increase value and the “T/DN” button [4] to decrease value.3.5 Locating a Hotspot:To find a hot spot, aim the thermometer outside the area of interest, then scan across with up and down motions until you locate the hot spot. Turning on the laser will make for more precise targeting.cotton cloth.2)Case cleaning: clean the case with a damp sponge/cloth and mild soap.Note: Do not use solvent to clean lens and do not submerge the unit into water or any other liquid.WARRANTY/DISCLAIMEROMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a p eriod of 13 months from date of purchase. OMEGA’s WARRANTY adds an additional one (1) month grace period to the normal one (1) year product warranty to cover handling and shipping time. This ensures that OMEGA’s customers receive maximum coverage on each product.If the unit malfunctions, it must be returned to the factory for evaluation. OMEGA’s Customer Service Department will issue an Authorized Return (AR) number immediately upon phone or written request. Upon examination by OMEGA, if the unit is found to be defective, it will be repaired or replaced at no charge. OMEGA’s WARRANTY does not apply to defects resulting from any action of the purchaser, including but not limited to mishandling, improper interfacing, operation outside of design limits, improper repair, or unauthorized modification. This WARRANTY is VOID if the unit shows evidence of having been tampered with or shows evidence of having been damaged as a result of excessive corrosion; o r current, heat, moisture or vibration; improper specification; misapplication; misuse or other operating conditions outside of OMEGA’s control. Components in which wear is not warranted, include but are not limited to contact points, fuses, and triacs.OMEGA is pleased to offer suggestions on the use of its various products. However, O MEGA neither assumes responsibility for any omissions or errors nor assumes liability for any damages that result from the use of its products in accordance with information provided by OMEGA, either verbal or written. OMEGA warrants only that the parts manufactured by the company will be as specified and free of defects. OMEGA MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT OF TITLE, AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF MERCHANTABILITY A ND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. LIMITATION OFLIABILITY: The remedies of purchaser set forth herein are exclusive, and the total liability of O MEGA with respect to this order, whether based on contract, warranty, negligence, i ndemnification, strict liability or otherwise, shall not exceed the purchase price of the component upon which liability is based. In no event shall OMEGA be liable for consequential, incidental or special damages.CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1) as a “Basic Component” under 10 CFR 21 (NRC), used in or with any nuclear installation or activity; or (2) in medical applications or used on humans. Should any Product(s) be used in or with any nuclear installation or activity, medical application, used on humans, or misused in any way, OMEGA assumes no responsibility as set forth in our basic WARRANTY/DISCLAIMER language, and, additionally, purchaser will indemnify O MEGA and hold OMEGA harmless from any liability or damage whatsoever arising out of the use of the Product(s) in such a manner.RETURN REQUESTS/INQUIRIESDirect all warranty and repair requests/inquiries to the OMEGA Customer Service Department. BEFORE RETURNING ANY PRODUCT(S) TO OMEGA, PURCHASER MUST OBTAIN AN AUTHORIZED RETURN (AR) NUMBER FROM OMEGA’S CUSTOMER SERVICE DEPARTMENT (IN ORDER TO AVOID PROCESSING DELAYS). The assigned AR number should then be marked on the outside of the return package and on any correspondence.The purchaser is responsible for shipping charges, freight, insurance and proper packaging to prevent breakage in transit.FOR WARRANTY RETURNS, please have the following information available BEFORE contacting O MEGA: FOR NON-WARRANTY REPAIRS, consultOMEGA for current repair charges. Have the following information available BEFORE contacting OMEGA:1. Purchase Order number to cover the COST o f the repair,2. Model and serial number of the product, and3. Repair instructions and/or specific problems relative to the product.1. Purchase Order number under which the product w as PURCHASED,Model and serial number of the product under warranty, andRepair instructions and/or specific problems relative to the product.2. 3. OMEGA’s policy is to make running changes, not model changes, whenever an improvement is possible. This affords o ur customers the latest in technology and engineering.OMEGA is a trademark of OMEGA ENGINEERING, INC.Where Do I Find Everything I Need for Process Measurement and Control?OMEGA…Of Course!Shop online at TEMPERATUREThermocouple,RTD&Thermistor Probes,Connectors,Panels&AssembliesWire:Thermocouple,RTD&ThermistorCalibrators&Ice Point ReferencesRecorders,Controllers&Process MonitorsInfrared PyrometersPRESSURE, STRAIN AND FORCETransducers&Strain GagesLoad Cells&Pressure GagesDisplacement TransducersInstrumentation&AccessoriesFLOW/LEVELRotameters,Gas Mass Flowmeters&Flow ComputersAir Velocity IndicatorsTurbine/Paddlewheel SystemsTotalizers&Batch ControllerspH/CONDUCTIVITYpH Electrodes,Testers&AccessoriesBenchtop/Laboratory MetersControllers,Calibrators,Simulators&PumpsIndustrial pH&Conductivity EquipmentDATA ACQUISITIONCommunications-Based Acquisition SystemsData Logging SystemsWireless Sensors,Transmitters,&ReceiversSignal ConditionersData Acquisition SoftwareHEATERSHeating CableCartridge&Strip HeatersImmersion&Band HeatersFlexible HeatersLaboratory HeatersENVIRONMENTAL MONITORINGAND CONTROLMetering&Control InstrumentationRefractometersPumps&TubingAir,Soil&Water MonitorsIndustrial Water&Wastewater TreatmentpH,Conductivity&Dissolved Oxygen Instruments。

概述通常湿度的测量和记录都是采用人的毛发做为测量部件但是随着对传感器反应时间要求的提高以及湿度快速变化或者在25%的湿度条件以下-10温度测量条件的大量的出现极力推荐使用我们特别设计的的测量传感器PERNIX如果你希望订购PERNIX的设备请特别指明订购需额外价钱湿度计的显示表盘由镀铝材料制白底黑字PERNIX测量部件对我们的194~202和235E250无效194 订购号00.01940.100 000圆形湿度表适合与桌面和墙挂使用钩或钉住技术数据测量范围 5~100%RH, 2%的刻度精度 2.5%RH(定期校准)工作温度-60~70尺寸 102mm,35mm D重量 0.300Kg外表天蓝色暗色镀铬外壳198 订购号00.01980.100 000温湿度表由毛细管温度传感器组成的湿度指示器由于结合了这种功能你同时可以得到相对和绝对湿度也能得到温度和露点温度技术数据测量范围 5~100%RH-25~40尺寸 133mm,46mm D重量 0.500Kg精度 2.5%RH(定期校准)1K外表天蓝色暗灰色镀铬外壳201a 订购号00.02011.100 000这种湿度计可以作为多功能测量设备由测量以%为单位的相对湿度为单位的温度和以hPa为单位的饱和压力辅件用于仪器重新标订带泡沫入口的透明箔袋技术数据测量范围5~100%RH-30~50精度 2.5%RH(定期校准) 1.0K(<0),0.7K(>0)尺寸 81mm; 242mmH; 28mm D重量0.400Kg外表天蓝色暗灰色镀铬外壳201a 订购号00.02020.100 000 Lambrech Polymeter,这种温湿度表一体化仪表允许读出相对湿度绝对湿度温度露点温度饱和压力水蒸汽压力以及不饱和度PERNIX型号无效辅件技术数据测量范围5~100%RH0.1~80g/m³绝对湿度-30~50精度 2.5%RH(定期校准) 1.0K(<0),0.7K(>0)尺寸 81mm; 242mmH; 28mm D重量0.4Kg外表天蓝色暗灰色镀铬外壳204 订购号33.02020.008 000用于201a和202型号的单独配件湿度计重量 0.050Kg220F 50P 订购号00.02202.205 000杆型湿度计带PERNIX测量部件用于测量空气湿度和吸湿性材料的含水量绝对轻制金属制造带手柄防摔坏玻璃树脂视窗技术数据测量范围5~100%RH刻度2%RH精度 2.5%RH(定期校准)工作温度-60~70尺寸 118mm; 480mmL; 杆19X8mm重量0.600Kg外层天蓝色暗灰色金属杆末梢为黑色235E 250 订购号00.02350.125 000带支架的湿度计特别适合使用在不易到达的地方表面安装技术数据测量范围5~100%RH刻度2%RH精度 2.5%RH(定期校准)工作温度-60~70尺寸 120mm 法兰;共 280mm H重量0.400Kg外层天蓝色镀铬外环235 E125 订购号00.02350.112 500带支架的湿度计如同235E250,但是深度为125mm技术数据尺寸120mm 法兰;共155 mm H重量 0.300Kg空气湿度传感器800系列这些传感器被装配在我们的 PERNIX系列产品上既带本地显示也可用于在线测量电缆末梢带护套辅件1个回形针和一个六角罗冒 R 1”主要技术数据测量范围5~100%RH刻度1%RH精度 2.5%RH(定期校准)工作温度-60~70最大电流 60mA(~0.5W)尺寸共395 mm H(帽子105mm;80mmD)重量 1.500Kg外层天蓝色暗灰色镀铬外壳800 N 30 订购号00.08000.202.030技术参数电阻 50-30-50 Ohm,对数800 L0-100 订购号00.08000.201.010电阻 0-100 Ohm,线性800 MU 订购号00.08000.206 0?2 空气湿度传感器带电阻/电流转换器有两种不同的型号输出 0~20mA(0~100%RH) 订购号00.08000.206 0024~20mA(0~100%RH) 订购号00.08000.206 042详细技术数据电阻0-100 Ohm,线性工作温度范围 -30~70输出0(4)~20mA(0~100%RH),负载500 ohm工作电压24VDC,10%重量 1.600Kg空气温湿度传感器传感器 809被装备到PERNIX传感器和铂探头上现场湿度显示内置电子器件用于温湿度在线测量在设备顶部有电缆接头接头带护套(Pg16)主要技术数据湿度测量范围 5~100%RH精度 2.5%RH温度测量范围-60~70精度0.3K(0)其它工作温度范围-60~70最大电流60mA(电阻输出)10mA(温度输出)尺寸共395 mm H(帽子105mm;80mmD)重量 1.5Kg外壳天蓝色暗灰色镀铬外壳809 L100订购号00.08090.231 515详细技术参数电阻输出5-100-5 ohm,线性809L 0-100 订购号00.08090.231 010详细技术参数电阻0-100 ohm,线性809MU 订购号00.08090.266 0?2带2个R-I转换器2个不同的型号都有效输出 0~20mA(0~100%RH) 订购号00.08090.266 1024~20mA(0~100%RH) 订购号00.08090.266 142主要技术数据电阻 0-100 ohm,线性精度 2.5%RH温度0.3K工作温度范围-30~70输出0(4)~20mA(~0~100%RH和-30~40)最大负载500 ohm工作电压24VDC10%重量 1.7Kg电气传感器8091经济型订购号00.08091.000 000一体化温湿度传感器她的精巧和可靠的设计使得她同时适合使用在工业和气象应用技术数据湿度测量元器件电容测量范围 0~100%RH精度2%RH输出模拟信号0~1VDC阻抗>2000 ohm温度测量元器件 PT100测量范围-20~80精度0.1K输出0~1V其它工作温度范围-20~80工作电压10~30VDC,10%功耗大约0.8mA重量0.4Kg8092 订购号00.08092.130 402 精密的相对湿度和空气温度传感器可以高质量的使用在工业和气象场合7芯电缆对外连接湿度测量元器件电容测量范围 0~100%RH精度1%RH(5~95%RH)2%RH其它输出模拟信号0~1VDC阻抗>1000 ohm温度测量元器件 PT100测量范围-40~60精度0.3K输出 PT100其它工作电压10~30VDC,10%功耗最大2.5mA重量0.4Kg连接电缆适合传感器00.08092.130 420,包括插入式接头(母头)长度 3.3m辅件814 订购号00.08140.000 000传感器防护罩保护传感器不受日照和雨淋适合用于空气湿度传感器800和空气温湿度传感器809技术数据尺寸 170mmФ;440mmH安装方式直接安装到22mm的杆上重量 1.7Kg漆层镀铝防水海洋色8141经济型订购号00.08141.?00 000传感器防护罩保护传感器不受日照和雨淋适合用于直径小于25mm的传感器技术数据尺寸 120mmФ;160mmH重量0.6Kg漆层白色防紫外线和挤压的塑料请选择防护罩8141经济型(M1) 订购号00.08141.000 000带固定螺纹8141经济型(M2) 订购号00.08141.100 000带固定螺纹和接头32.08141.001 000适合传感器00.08281.xxx xxx8141, 经济型(M3) 订购号00.08141.300 000使用保护盒子替代了固定螺纹适合传感器00.08092.130 xxx815保护管由镀镍的铜制造成当风速超过6m/s时或者在空气极度污染的场合使用适合传感器800和809使用重量0.070Kg.干湿球湿度计706 订购号00.0706.000 0?0标准干湿球湿度计设计用于安装到设备内部RH的测量由垂直安放的水银温度计带弹簧吸出器决定温度和温度得出的参数由水平的水银温度计决定配带我们的干湿球表格771b一个吸湿管0.5m长的毛细管和两个塞子这种干湿球温湿度计仅仅在0.2刻度时有效最大/最小温度计请选择0.5K刻度订购号:00.07060.000 0200.2K刻度订购号:00.07060.000 050技术数据(706型号)干湿球温度计-30~5015mmФ;370mmL;0.06Kg最小/最大温度:刻度 0.5K,-40~40;15mmФ;290mmL;0.05Kg刻度 0.2K,-40~40;15mmФ;290mmL;0.06Kg尺寸600mmH,200mmW重量 2.4Kg漆层白色金属支架706H 订购号00.07061.000 0?0标准干湿球温湿度计如同706除了不带三角架这种这种干湿球温湿度计仅仅在0.2刻度时有效0.5K刻度订购号:00.07061.000 0200.2K刻度订购号:00.07061.000 050706a 订购号32.07060.006 050干湿球温湿度计的部件刻度 0.5K,-30~50;15mmФ;370mmL;0.06Kg1052a-1/2K 订购号32.10520.001 020最大温度计的部件刻度 0.5K,-30~50;15mmФ;370mmL;0.06Kg1052a-1/5K订购号32.10520.001 050最大温度计的部件刻度 0.5K,-30~50;15mmФ;370mmL;0.06Kg1052b-1/2K 订购号32.10520.002 020最大温度计的部件刻度 0.5K,-30~50;15mmФ;370mmL;0.06Kg1052b-1/5K 订购号32.10520.002 050最大温度计的部件刻度 0.5K,-30~50;15mmФ;370mmL;0.06Kg707 订购号32.07060.009 000最大温度计的部件重量0.600Kg740 订购号00.07400.009 000带折叠柄的可旋转干湿球温湿度计根据需要进行温湿度测量温度计容器也可作为防辐射保护配带我们的干湿球表格771b一个吸湿管0.5m长的毛细管和两个塞子技术数据温度范围 -10~60刻度 0.2K, -30~40刻度 0.2K精度0.2K尺寸305X60X20mm(HXWXD)重量 0.600Kg740a 订购号32.07400.003010用于740型号的温度计0.2K刻度741 订购号50.07400.004 000用于740的皮制包761 订购号00.07610.000 0?0渴式干湿度计简易型用于湿度和温度定义的标准设备根据DIN58661 标准制作的精密水银温度计适合与调整其它的温度和湿度产品双壁设计减少辐射影响两个温度计都必须在由吸尘器产生的2m/s的风速的空气流通下工作辅件带湿气的容器安装螺纹线性发条0.5m的毛细管参数校验证书干湿表771b塑料箱子需要另外订购请选择-5~600.2刻度订购号00.07610.000 010-30~400.2刻度订购号00.07610.000 020技术数据精度0.2K在测量范围的最大误差0.2K在任何10的范围内的最大误差0.1K尺寸90mm,420mmH,箱子420x285x100mm(LXWXH)重量设备 1.2公斤辅件 1Kg漆层白色吸出器镀铬管761a 订购号32.07610.003 010单独温度计761a 订购号32.07610.003 020单独温度计761,官方认证订购号00.07610.000 0?2渴型干湿度湿度计就如761型只是增加了官方认证证书请选择你需要的测量范围:-5~600.2刻度订购号00.07610.000 012-30~400.2刻度订购号00.07610.000 022761a官方认证订购号32.07610.003 012单独温度计,用于00.07610.000 012,-5~60761a官方认证订购号32.07610.003 022单独温度计, 用于00.07610.000 022,-30~40761e订购号32.07610.020 000手持式推荐用于移动测量用于固定测量的干湿球湿度计819 订购号00.8190.000 000干湿球湿度计特别用于户外使用空气湿度测量通过2个倾斜的铂电极这两个铂电极必须被保护不受辐射连续的气流必须从相反的方向连续通过防止外界影响技术参数测量范围依赖于外接的显示器/记录器/转换器精度0.1K在0时工作温度范围0以上供电230V AC;50Ha,160mA水柜容量150cm³重量 1.9Kg干湿度湿度表和便携计算器用测量值并且套用公式计算湿度值需要大量的时间因此图形或者数字干湿球湿度表被经常使用渴氏干湿球计算表德国气象服务编辑德国Friedrich Vieweg, Brauschweig出版我们的每个干湿球湿度都是由图形干湿球表提供在大气压1006.6hPa的情况下计算得出在某种高精度的调节需要下在有20hPa的偏差的情况下必须进行压力修正在大多数修正条件下我们提供便携计算器767和湿度计算表768G768G 订购号00.07680.030 000干湿球湿度表根据Sonntag计算曲线有详细的蒸汽压力和湿度修正应用的大气压力范围670~1065hPa曲线大小 Din A4(210x297mm)771b 订购号00.07710.020 000用于湿度计算的干湿球湿度表湿度范围0~100%RH环境温度范围0~100参考压力1006.6hPa表尺寸560X580mm767 订购号00.07670.001 000可编程便携计算器带湿度计算程序包含Sprung公式也能用于修正计算相对湿度和绝对湿度也能计算修正露点这个预设参数是在大气压力1006.6的情况用户也可根据自己的要求随意更改重量0.500Kg。