炉甘石洗剂的工艺流程

  • 格式:docx
  • 大小:28.12 KB
  • 文档页数:2

炉甘石洗剂的工艺流程

1.炉甘石经过提纯加工后成为炉甘石洗剂的原料。

After refined processing, magnesite becomes the raw

material for magnesite detergent.

2.首先将炉甘石原料进行破碎和粉碎处理。

Firstly, the magnesite raw material is crushed and ground.

3.然后将粉碎后的炉甘石进行筛分,去除杂质。

Then the ground magnesite is sieved to remove impurities.

4.筛选后的炉甘石进入混合池进行配比。

The sieved magnesite enters the mixing tank for

proportioning.

5.配比好的炉甘石原料进入反应釜中进行碱性水溶液的添加和混合。 The proportioned magnesite raw material enters the

reactor for the addition and mixing of alkaline aqueous

solution.

6.反应釜中,炉甘石和碱性水溶液发生化学反应。

In the reactor, magnesite and alkaline aqueous solution

undergo a chemical reaction.

7.反应后的产物经过过滤、干燥处理。

The resulting product is filtered and dried.

8.经过干燥处理后,得到炉甘石洗剂的成品。

After drying, the finished magnesite detergent is

obtained.

9.最后,成品被包装和储存待售。

Finally, the finished product is packaged and stored for

sale.