ASTMD3330剥离强度考试标准中文版

剥离试验标准
剥离试验是指通过施加力来评估两个物体或材料之间的粘合强度或连接性能。

根据不同的应用领域和需要，有许多不同的剥离试验标准，例如：
1. ASTM D903：标准试验方法，用于测定撕裂破断强度和断口延伸率，适用于粘合剂和粘合剂复合材料的剥离试验。

2. ISO 4624：涂料和涂层系统的标准试验方法，用于测定涂层与基材之间的粘接强度。

3. ASTM D429：标准试验方法，用于评估纺织品和纤维材料之间的粘合强度。

4. ISO 11339：汽车橡胶制品的标准试验方法，用于评估粘接连接的剥离强度。

5. ASTM D3167：用于评估橡胶材料与金属或其他材料之间的粘接强度的标准试验方法。

上述仅列举了一些常见的剥离试验标准，具体的标准选择应根据具体的材料、应用领域和试验要求来确定。

欲了解
特定领域或材料的剥离试验标准，建议参考相应的国际标准组织（如ASTM、ISO）或相关行业组织的标准规范。

astm d标准中文版ASTM D标准中文版。

ASTM D标准是指美国材料和试验协会制定的一系列标准，涵盖了材料的测试方法、规范和指南。

这些标准被广泛应用于工程材料和产品的生产、测试和质量控制过程中。

ASTM D标准的中文版对于中国的工程领域同样具有重要意义，因此我们有必要对ASTM D标准中文版进行深入了解和研究。

ASTM D标准中文版的内容涵盖了材料的物理性能、化学性能、机械性能、耐久性能等方面的测试方法和规范。

这些标准不仅对于材料的生产和质量控制具有指导意义，也为工程设计和工程质量检验提供了重要依据。

比如，ASTM D638标准规定了塑料拉伸性能的测试方法，ASTM D790标准规定了塑料弯曲性能的测试方法，ASTM D2240标准规定了硬度测试方法等等。

ASTM D标准中文版的制定过程严格遵循科学、公正、公开、透明的原则，确保了标准的权威性和可靠性。

这些标准的制定依据了大量的实验数据和工程实践经验，经过了多次讨论和修订，是经过权威专家和行业代表共同努力形成的。

因此，ASTM D标准中文版具有很高的参考价值和应用前景。

ASTM D标准中文版的应用范围非常广泛，涉及到塑料、橡胶、涂料、油漆、胶粘剂、纤维、润滑油、聚合物、复合材料等各种材料和制品。

这些材料和制品在航空航天、汽车工程、建筑工程、化工、电子电器、环境保护、医疗器械、食品包装等领域都有着重要的应用。

因此，熟练掌握ASTM D标准中文版对于工程技术人员和质量管理人员来说是非常必要的。

总之，ASTM D标准中文版是一系列权威的工程材料和产品测试方法、规范和指南，具有很高的参考价值和应用前景。

我们应该加强对ASTM D标准中文版的学习和应用，不断提高自己的专业水平和工作质量，为推动中国工程材料和产品质量的提高做出积极的贡献。

希望通过我们的共同努力，ASTM D标准中文版能够更好地为中国的工程领域服务，为中国的工程技术进步和工程质量提升作出更大的贡献。

剥离力美标测试方法
剥离力是指在一定条件下，沿着粘合剂与基材之间的界面发生
分离的力量。

美国标准测试方法通常使用ASTM国际标准。

在这里，
我将从多个角度来介绍剥离力的美国标准测试方法。

首先，ASTM D903是一种常用的测试方法，用于测量粘合剂与
基材之间的剥离力。

这项测试涉及将一端粘合在基材上的试样与另
一端连接到测试设备上，然后逐渐施加力直到试样分离。

该测试方
法适用于各种类型的粘合剂和基材，包括胶粘剂、涂层材料等。

其次，ASTM D3330是另一种常用的剥离力测试方法，特别适用
于测量薄膜材料的剥离性能。

该方法涉及将试样粘合在标准板上，
然后使用专用设备逐渐施加力直到试样分离。

这种方法对于评估胶带、薄膜等材料的剥离性能非常有效。

除了这些具体的测试方法外，美国标准还可能包括对测试条件、设备规格、数据记录和报告要求等方面的详细规定。

例如，测试温度、湿度、载荷速率等条件都可能对测试结果产生影响，因此在进
行剥离力测试时需要严格遵守相关的标准规范。

此外，美国标准还可能涉及对测试设备的校准和验证要求，以确保测试结果的准确性和可靠性。

在进行剥离力测试时，操作人员需要严格按照标准规定的程序进行操作，并对测试设备进行定期维护和校准，以确保测试结果的准确性。

综上所述，剥离力的美国标准测试方法涵盖了多个方面，包括具体的测试方法、测试条件、设备要求、数据处理等内容。

在进行剥离力测试时，需要严格遵守相关的标准规范，以确保测试结果的准确性和可靠性。

载带剥离力国际标准载带剥离力是指在一定条件下，将载带从背衬材料上剥离所需的力量。

它是衡量胶带粘合性能的重要指标之一。

因此，制定载带剥离力国际标准对于保证胶带质量、促进国际贸易具有重要意义。

目前，国际上已经制定了多个载带剥离力测试标准，如ASTM D3330、ISO 29862、JIS Z0237等。

这些标准主要针对不同类型的胶带和不同应用领域的要求，具有一定的局限性。

因此，制定一项全球通用的载带剥离力国际标准显得尤为必要。

在制定国际标准时，需要考虑以下几个方面：首先，标准应该具有普适性。

即使在不同的环境条件下，也能够保证测试结果的准确性和可比性。

因此，标准应该明确测试条件，如温度、湿度、载带和背衬材料的选择等。

其次，标准应该具有可操作性。

测试方法应该简单易行，能够被广泛应用。

同时，标准应该明确测试设备和仪器的要求，以保证测试结果的准确性。

最后，标准应该具有可靠性。

测试结果应该能够反映胶带的实际使用性能。

因此，标准应该考虑不同应用领域的要求，如建筑、汽车、电子等。

制定载带剥离力国际标准需要各国专家的共同努力和合作。

在制定标准的过程中，需要充分考虑各方面的意见和建议，以达到最终的共识。

同时，标准的制定也需要不断更新和完善，以适应不断变化的市场需求和技术发展。

总之，制定载带剥离力国际标准对于保证胶带质量、促进国际贸易具有重要意义。

在制定标准的过程中，需要考虑普适性、可操作性和可靠性等方面的要求，以达到最终的共识。

同时，标准的制定也需要不断更新和完善，以适应不断变化的市场需求和技术发展。

烫金附着力测试标准
烫金附着力测试标准通常根据不同的行业和应用领域而有所不同。

以下是一些常见的烫金附着力测试标准：
1. ISO 2834-2: 该标准适用于纸和纸板上的烫金附着力测试。

测试方法包括使用烫金箔在标准条件下进行烫金，并使用胶带进行剥离测试。

2. ASTM D3330: 该标准适用于各种材料上的粘接强度测试，包括烫金附着力。

测试方法包括使用胶带进行剥离测试，并测量剥离力。

3. GB/T 7707-2008: 该标准适用于纸和纸板上的烫金附着力测试。

测试方法包括使用烫金箔在标准条件下进行烫金，并使用胶带进行剥离测试。

4. TAPPI T 541: 该标准适用于纸和纸板上的烫金附着力测试。

测试方法包括使用烫金箔在标准条件下进行烫金，并使用胶带进行剥离测试。

这些标准提供了一套规范的测试方法，以确保烫金箔在不同材料上的附着力符合要求。

具体的测试方法和参数应根据实际应用需求和行业标准进行确定。

pe膜剥离测试标准
PE膜剥离测试是一种评估聚乙烯（PE）膜在剥离过程中的性能和粘附力的测试方法。

以下是一种常见的PE膜剥离测试标准：
ASTM D903-98: 这是美国材料和试验协会发布的标准，用于测量塑料和橡胶材料剥离性能的标准试验方法。

这个标准涵盖了不同类型的剥离试验方法，其中包括剥离强度和剥离行为的测量。

该标准要求将待测材料的一端固定在测试台上，然后以一定的速度剥离另一端。

测量剥离过程中所需的力和剥离速度，并计算出剥离强度和剥离曲线。

此外，根据特定应用的要求，还可以使用其他标准进行PE膜剥离测试，例如ISO 8510-2：1994、GB/T 2790-1995等。

总结起来，PE膜剥离测试标准包括固定方式、剥离速度、测量的力量和测量剥离强度等要素，旨在评估PE膜在剥离过程中的性能和粘附力。

ASTMD3330压敏胶带剥离强度测试标准翻译版一、引言压敏胶带在日常生活和工业生产中都有着广泛的应用，其性能的优劣直接影响到使用效果和产品质量。

而剥离强度作为评估压敏胶带质量的重要指标之一，准确的测试方法至关重要。

ASTMD3330 标准规定了一种常用的压敏胶带剥离强度测试方法，为了让更多相关人员能够理解和应用这一标准，我们对其进行了翻译和解读。

二、测试设备和材料（一）测试设备1、拉力试验机：能够以恒定的速度进行拉伸，并准确测量施加的力和位移。

2、夹头：用于固定胶带和测试板，确保在测试过程中不会出现滑移。

（二）测试材料1、标准测试板：一般采用不锈钢板，表面光滑、平整，尺寸符合标准要求。

2、压敏胶带：待测试的压敏胶带样品。

三、测试样品的制备（一）胶带粘贴将压敏胶带粘贴在标准测试板上，粘贴过程中要避免气泡和褶皱的产生，确保胶带与测试板完全贴合。

（二）静置时间粘贴完成后，将样品在标准环境下静置一定时间，以保证胶带的粘性充分发挥。

四、测试步骤（一）安装样品将带有胶带的测试板安装在拉力试验机的夹头上，确保夹头牢固夹住测试板，胶带的自由端处于垂直向下的位置。

（二）设定测试参数根据标准要求，设定拉力试验机的拉伸速度。

（三）进行测试启动拉力试验机，以设定的速度拉伸胶带，直至胶带从测试板上完全剥离。

在测试过程中，要记录施加的力和位移数据。

五、数据处理和结果表示（一）数据记录记录测试过程中的最大剥离力值。

（二）结果计算根据测试得到的数据，计算平均剥离强度，单位通常为牛顿/厘米（N/cm）或磅/英寸（lb/in）。

（三）结果表示将测试结果以清晰、准确的方式表示出来，包括测试样品的详细信息、测试条件和最终的剥离强度值。

六、测试的注意事项（一）环境条件测试应在标准的环境温度和湿度下进行，以确保测试结果的准确性和可比性。

（二）操作规范操作人员应严格按照测试步骤进行操作，避免因操作不当导致测试结果的偏差。

（三）设备校准定期对拉力试验机进行校准，确保测试设备的准确性和可靠性。

压敏胶带剥离强度测试标准1. 范围1.1这些测试方法主要用于压敏胶带剥离强度的测试。

1.1.1 方法A：单面胶从标准钢板或其他类似表面的平板上180°剥离的测试方法。

1.1.2 方法B：单面背衬胶粘性的测试方法。

1.1.3 方法C：双面胶与标准钢板粘性的测试方法。

4.3.1表面粘性——把双面胶的正面贴到不锈钢板上，衬里面朝外。

撕去衬纸，贴一层0.025mm（0.001in）的聚酯薄膜，接下来按方法A进行测试。

4.3.2 衬里粘力——在双面胶的正面贴上0.025mm的聚酯薄膜，然后撕去衬纸贴到不锈钢板上。

接下来的测试同方法A。

4.4方法D——测试离型纸胶带（单面或者双面）的粘性——把胶带粘贴到测试钢板上，衬里面朝外。

同方法A中单面胶从钢板上剥离类似，用同样的方法测试衬纸与胶粘剂的剥离强度。

4.5方法E——无基材胶带的粘力测试4.5.1正面——把胶带贴到标准测试钢板上。

除去衬纸，贴上厚度为0.025mm的聚酯薄膜形成一个背衬薄膜胶带试样。

按照方法A进行剥离力的测试。

宽度都是可用的。

为了不引起试样边缘破损，取样器也可以选择适合的。

注意1—这些宽度是根据GuideD5750/D5750M的公制计量单位为参照的。

除了欧洲外，所谓的组合公制单位世界通用，如果测试的宽度不同，计算的方法也相应的不同。

注意2—12mm取样刀规格是12mm宽，220mm长的铝制刀柄。

6.2剂量器分配器—溶剂，比如洗涤瓶。

6.3测试板——不锈钢板，50×125，不小于1.1mm厚，表面粗糙高度50±25nm。

测试板如果有锈或者很多刮痕就不能使用。

新板使用前要清洗。

要保护测试板表面不被刮花或污染，其存放条件如10节所述。

6.4压辊——自动或手动6.4.1 压辊钢圈直径85±2.5mm，宽45±1.5mm，表面橡胶6mm左右厚，硬度80±5.压辊表面为无任何凹凸缝隙的光滑圆筒。

压敏胶带剥离强度测试标准1. 范围1.1 这些测试方法主要用于压敏胶带剥离强度的测试。

1.1.1 方法 A：单面胶从标准钢板或其他类似表面的平板上180°剥离的测试方法。

1.1.2 方法B：单面背衬胶粘性的测试方法。

1.1.3 方法C：双面胶与标准钢板粘性的测试方法。

1.1.4 方法D：单面胶或双面胶与离型纸的粘性的测试方法。

1.1.5 方法E：无基材胶带与标准钢板的粘性的测试方法。

1.1.6 方法F：单面胶与标准钢板90°剥离的测试方法。

1.2 这些测试方法是给定压敏胶带粘性测试的统一评定方法，这评定可以针对一卷，两卷之间或一批。

1.3 不同的基材和（或）胶质都会影响测定结果，因此，这些方法不适用不统一的胶质。

1.4 这些测试方法不适用于一些相对硬质的基材、衬里或在低强度下高粘性背胶的测试。

这些特性对测试结果有很大的影响，因而不能真正代表粘力。

1.5 测试数值用 IS 或英寸—磅做为单位，在每个单位系统中数值的规定都是不同的，因此，每个系统必须使用自己的单位。

1.6 这些标准没用强调在操作过程中可能会发生的所有安全隐患。

标准使用者有义务去建立一个安全健康的操纵规则。

4. 测试方法概要4.1 方法 A——单面胶 180°剥离——用可控压力把胶带粘贴到标准测试板上。

测试时，以恒定的速度180°角从测试板上剥离。

4.2 方法 B——单面背衬胶的粘性——胶带式样一粘贴到测试钢板上，取另一式样粘贴到式样以的背面，然后按方法A 进行测试。

4.3 方法C——双面胶4.3.1 表面粘性——把双面胶的正面贴到不锈钢板上，衬里面朝外。

撕去衬纸，贴一层 0.025mm（0.001in）的聚酯薄膜，接下来按方法A 进行测试。

4.3.2 衬里粘力——在双面胶的正面贴上0.025mm 的聚酯薄膜，然后撕去衬纸贴到不锈钢板上。

接下来的测试同方法A。

4.4 方法 D——测试离型纸胶带（单面或者双面）的粘性——把胶带粘贴到测试钢板上，衬里面朝外。

Designation:D3330/D3330M–04Standard Test Method forPeel Adhesion of Pressure-Sensitive Tape1This standard is issued under thefixed designation D3330/D3330M;the number immediately following the designation indicates the year of original adoption or,in the case of revision,the year of last revision.A number in parentheses indicates the year of last reapproval.A superscript epsilon(e)indicates an editorial change since the last revision or reapproval.This standard has been approved for use by agencies of the Department of Defense.1.Scope1.1These test methods cover the measurement of the peel adhesion of pressure-sensitive tapes.1.1.1Test Method A gives a measure of the adherence, when peeled at180°angle,to a standard steel panel or to other surface of interest for a single-coated tape.1.1.2Test Method B gives a measure of the adherence to the backing of a single-coated tape.1.1.3Test Method C gives a measure of the adherence of double-coated tape to a standard steel panel or other surface of interest.1.1.4Test Method D gives a measure of the adherence of the release liner to the adhesive of either single-or double-coated tape.1.1.5Test Method E gives a measure of the adherence of an adhesive transfer tape to a standard steel panel or other surface of interest.1.1.6Test Method F gives a measure of the adherence,when peeled at90°angle,to a standard steel panel or other surface of interest for a single-coated tape.1.2These test methods provide a means of assessing the uniformity of the adhesion of a given type of pressure-sensitive adhesive tape.The assessment may be within a roll of tape, between rolls,or between production lots.1.3Variations in either the tape backing or the adhesive,or both,affect the response.Therefore,these test methods cannot be used to pinpoint the specific cause(s)of non-uniformity.1.4These test methods may not be appropriate to test tapes having relatively stiff backings,stiff liners,or backings show-ing high stretch at low forces.These characteristics will result in a high variability for the test response which is not a true indication of the real nature of the adhesive bond.1.5Values stated in either SI or inch-pound units are to be regarded separately as standard.The values stated in each system may not be exact equivalents,therefore,each system must be used independently without combining values in any way.1.6This standard does not purport to address all of the safety concerns,if any,associated with its use.It is the responsibility of the user of this standard to establish appro-priate safety and health practices and determine the applica-bility of regulatory limitations prior to use.2.Referenced Documents2.1ASTM Standards:2A666Specification for Annealed or Cold-Worked Austen-itic Stainless Steel,Sheet,Strip,Plate,and Flat BarD996Terminology of Packaging and Distribution Environ-mentsD3715/D3715M Practice for Quality Assurance of Pressure-Sensitive TapesD4332Practice for Conditioning Containers,Packages or Packaging Components for TestingD5750Guide for Width and Lengths of Pressure-Sensitive TapeE122Practice for Calculating Sample Size to Estimate, With a Specified Tolerable Error,the Average for Charac-teristic of a Lot or Process2.2AFERA Standard:34001Self adhesive tapes–Measurement of peel adhesion 2.3European Norm:4EN1939Self adhesive tapes–Measurement of peel adhe-sion from stainless steel or from its own backing2.4Pressure Sensitive Tape Council Standards:5PSTC101Peel Adhesion of Pressure Sensitive Tape1These test methods are under the jurisdiction of ASTM Committee D10on Packaging and are the direct responsibility of Subcommittee D10.14on Tape and Labels.Current edition approved Oct.1,2004.Published October2004.Originally approved st previous edition approved in2002as D3330/ D3330M–02e1.2For referenced ASTM standards,visit the ASTM website,,or contact ASTM Customer Service at service@.For Annual Book of ASTM Standards volume information,refer to the standard’s Document Summary page on the ASTM website.3Association des Fabricants Européens de Rubans Auto Adhesifs(AFERA), LAM,Laan Copes van Cattenburch79,NL-2858EW,The Hauge,Netherlands.4European Norm,(EN);available from ComitéEuropéen de Normalisation (CEN),Rue de Stassart,36,B-1050,Brussels,Belgium.5Pressure Sensitive Tape Council(PSTC),400North Michigan Ave.,#2200, Chicago,IL60611–4267.Copyright©ASTM International,100Barr Harbor Drive,PO Box C700,West Conshohocken,PA19428-2959,United States.3.Terminology3.1Definitions—Terminology found in Terminology D996 shall apply.4.Summary of Test Method4.1Test Method A—Single-Coated Tapes,Peel Adhesion at 180°Angle—A strip of tape is applied to a standard test panel (or other surface of interest)with controlled pressure.The tape is peeled from the panel at180°angle at a specified rate,during which time the force required to effect peel is measured.4.2Test Method B—Adhesion to Backing,Single-Coated Tapes—A strip of the tape under test is applied to a rigid panel.A strip of the tape under test is applied to the backing of the first strip of tape and tested for peel adhesion as described in Test Method A.4.3Test Method C—Double-Coated Tapes:4.3.1Face Side Adhesion—The double-coated tape is ad-hered to a stainless steel panel(or other surface of interest), liner side up.The liner is removed and the exposed adhesive covered with a strip of0.025-mm[0.001-in.]thick polyester film.The resulting tape is then tested as described in Test Method A.4.3.2Liner Side Adhesion—The face side adhesive is ad-hered to a0.025-mm[0.001-in.]polyesterfilm.The liner is removed and the tape is applied adhesive down to a stainless steel panel(or other surface of interest).Testing is conducted as described in Test Method A.4.4Test Method D—Adhesion to Liner—The tape is adhered to a standard steel test panel with the liner side up.The liner is peeled from the adhesive in the same manner as in peeling a single-coated tape from a standard panel as described in Test Method A.4.5Test Method E—Adhesion of Adhesive Transfer Tapes: 4.5.1Face Side—The tape is adhered to a standard panel(or other surface of interest).The liner is removed and a0.025-mm [0.001-in.]thick strip of polyester is adhered to form a film-backed strip of tape.The adhesion is measured as de-scribed in Test Method A.4.5.2Linear Side—The transfer tape is applied to a strip of 0.025-mm[0.001-in.]thick polyesterfilm,the liner is removed and the resulting tape’s adhesion is measured as described in Test Method A.4.6Test Method F—Single-Coated Tapes,90°Peel—A strip of tape is applied to a standard test panel(or other surface of interest)with controlled pressure.The tape is peeled from the panel at90°angle at a specified rate,during which time the force required to effect peel is measured.5.Significance and Use5.1These test methods are tools for quality assurance use. Given specific pressure-sensitive tape and a requirement in terms of the minimum or maximum peel value expected for this tape,the data from the test can be used in conjunction with acceptance criteria.5.2Test Method A,B,C,E,or F can show the relative bond strength of a given tape to one or more surfaces(material and texture)as compared to the standard stainless steel panel. Substitution of representative samples of materials in question for the standard steel panel would suffice to do this.5.3Test Methods A,B,C,E or F cannot be used to compare two pressure-sensitive tapes of the same type but of different manufacture for their ability to adhere to a surface.This is because the measured peel force is not normalized for afixed area of stress.The area under stress varies with backing stiffness and adhesive rheology(firmness).Two different tapes seldom agree in these properties.5.4Test Method D can show the amount of force required to remove a liner that covers the adhesive side of a tape at a specified peel rate.The force will be different at other peel rates.5.5These test methods may not provide design information as there is usually no direct relationship between peel adhesion and any functional requirement.6.Apparatus6.1Specimen Cutter—The specimen cutter shall hold two single-edged razor blades in parallel planes,a precise distance apart,to form a cutter of exact specimens widths.Two cutters, 12-and24-mm[0.05-and1-in.]cutting width,shall be available.Appropriate alternates which will not cause edge damage may be used.6N OTE1—The12-mm[0.5-in.]cutter shall consist of a12-mm[0.5-in.] thick by220-mm[8-in.]length aluminum bar stock12-mm[0.05-in.] wide.The edges for about125mm[5in.]from one end shall be slightly rounded to form a handle.The width of the bar for75mm[3in.]from the opposite end shall be narrowed to exactly12mm[0.5in.]minus the thickness of a single razor blade(one of two used as cutting edges).The razor blades shall be held in position using side plates.The end of the cutter shall be cut away at45°angle to expose the cutting edge at one end of the blades.The edges shall be separated by1260.10mm[0.5in.].The 24-mm[1-in.]cutter shall follow the same description except the bar stock shall be24.0mm[1in.]and shall be narrowed exactly24mm[1in.] minus the thickness of a single razor blade.6.2Dispensing System—For solvents,such as a wash bottle.6.3Panel—A stainless steel panel,50by125mm[2by5 in.]no less than1.1mm[0.043in.]thickness,conforming to Type302or304of Specification A666,having a bright annealedfinish.The surface roughness height shall be50625 nm[2.061.0µin.]arithmetical average deviation from the mean line.Panels showing stains,discoloration,or many scratches are not acceptable.New panels should be cleaned prior to use as described in11.1,except with ten washes of the final solvent.Between uses,the panel test surface shall be protected from scratches and contamination,and the panels stored at conditions described in Section10.6.4Roller—Mechanically or hand operated.6.4.1A steel roller8562.5mm[3.2560.1in.]in diameter and4561.5mm[1.7560.05in.]in width,covered with rubber approximately6mm[0.25in.]in thickness,having a Shore scale A durometer hardness of8065.The surface shall be a true cylinder void of any convex or concave deviations. The mass of the roller shall be2040645g[4.560.1lb].6These widths correspond to the primary metric(SI)units described in Guide D5750.These so-called“modular metric”units are used throughout the world, except for Europe.If it is desirable to test slightly different widths(for example,25 mm)of specimens than those described in9.1,this should be noted(see18.1.7)and calculations must also account for the difference(see17.1).6.4.2No part of the apparatus shall increase the mass of the roller during use.The roller shall move either mechanically or by hand at the rate of1060.5mm/s[2460.5in./min].A mechanically operated roller is recommended for referee purposes.N OTE2—A simple check to determine if the rubber surface is cylindri-cal is to wrap the roller in a very thin paper(onionskin)and drag it across aflat glass plate on which is placed carbon paper,face up.The carbon rubs off onto the thin paper wrapper to reveal high spots or hollows on the rubber surface.6.5Adhesion Tester—A constant-rate-of-extension(CRE) tension tester shall be used.It is proposed to use an electronic machine taking at least one reading per mm[0.1in.]of tape peeled.The tester shall have two clamps with centers in the same plane,parallel with the direction of the motion on the stressing clamp,and so aligned that they will hold the specimen wholly in the same plane;a means of moving the stressing clamp at a uniform rate of5.060.2mm/s[1260.5 in./min]and a device for recording load.The instrument shall be calibrated to an accuracy of0.5%of full scale and the scale range used for any test shall be such that the mean test level falls within20to80%of full scale.6.6Fixture—90°peel for Test Method F.7.Reagents and Materials7.1Purity of Reagents—Reagent grade chemicals should be used in all tests.Other grades may be used,provided it isfirst ascertained that the reagent is of sufficiently high purity to permit its use without lessening accuracy of the determination.7.2Solvents:7.2.1Any of the following solvents may be used for cleaning:7.2.1.1Diactone alcohol non-residual,technical grade or better,7.2.1.2Methanol(95%),7.2.1.3Methyl ethyl ketone(MEK),7.2.1.4n-Heptane,or7.2.1.5Acetone.7.2.2For referee testing,thefinal cleaning shall be with MEK or acetone.7.2.3Before selecting or using these solvents for cleaning test panels,be sure to read and follow all precautions on the chemical Material Safety Data Sheets(MSDS)and consult with Environmental,Health,and Safety(EHS)professionals.7.3Cleaning Material—Absorbent,surgical gauze,cotton wool or tissue may be used.To be suitable,materials must be lint-free during use,absorbent,contain no additives that are soluble in the solvents listed in7.2and made exclusively from virgin materials.8.Sampling8.1Acceptance Sampling—Sampling shall be in accordance with Practice D3715/D3715M.8.2Sampling for Other Purposes—The sampling and the number of test specimens depends on the purpose of the testing.Practice E122is recommended.It is common to test at leastfive specimens of a particular tape.Test specimens should be taken from several rolls of tape,and whenever possible, among several production runs of tape.Strong conclusions about a specific property of a tape cannot be based on tests ofa single unit(roll)of a product.9.Test Specimen9.1The specimen shall be24-mm[1-in.]wide.If the specimen is of a different width,refer to Note4.A tolerance of60.5mm[61/64in.]shall be allowed.The length shall be approximately300mm[12in.].9.2Discard at least three but no more than six outer wraps of tape from the sample roll before taking the specimens for testing.9.3Remove one specimen per sample roll for each test to be performed.Remove the specimen from a freely rotating roll at the rate of500to750mm/s[20to30in./s].Where width or other factors causing a high adherence to backing makes it impossible to remove the specimen at the prescribed rate, remove it at a rate as close to500mm/s[20in./s]as possible.9.4When tape is wider than24mm[1in.],specimens of the widest specified width are to be cut from the center of a strip removed from the roll in accordance with9.3.9.5Apply specimen within5min after unwinding.10.Conditioning10.1Condition the sample rolls of tape in the standard conditioning atmosphere as described in Practice D4332for a period of not less than24h.Test at these conditions. (Warning—The tester should know that by prolonged han-dling heat is transmitted to the stainless steel test panel. Therefore,during and after application of the adhesive tape to the test panel,the panel should be handled as little as possible.)11.Test Method A—Single-Coated Tapes at180°Angle 11.1Dispense one of the solvents listed in7.2.1onto the panel,wiping it to dryness with fresh absorbent cleaning material.Repeat for a total of three washes with this solvent. The panel shall be allowed to dry at standard conditions for at least10min.If cleaned panel is not used within10h,it should be recleaned.N OTE3—Discard panels showing stains,discoloration,or many scratches.Avoid contacting panel surface withfingers.During storage, panels should be protected from damage or contamination.11.2Remove a300-mm[12-in.]specimen of the tape to be tested,as described in9.3.Fold12mm[0.5in.]at one end, adhesive to adhesive to form a tab.Touch other end of the specimen to an end of the test panel.Hold the other end of the specimen so that it does not make contact with the panel but is positioned loosely above it.Roll mechanically or by hand twice in each lengthwise direction,causing the roller to apply the tape to the panel.This prevents entrapment of air between the adhesive and the panel.Should this occur,discard the specimen.N OTE4—Where the width of the specimen is less than24mm[1in.], prior to applying test specimen,apply a strip or strips of the tape,to give an equivalent width of24mm[1in.]for rolling purposes or use roller of appropriate weight to obtain a line pressure equal to2040g[4.5lb]for24 mm[1in.]width635%.11.3Individually prepare each specimen and test within1min.N OTE5—Longer dwell time will give different results.Peel adhesion increases with dwell time at different rates for various tapes.A longer dwell time may be chosen purposely.11.4Double back the folded end of the tape at an angle of 180°and peel25mm[1in.]of the tape from the panel.Clamp that end of the panel into the movable jaw of the adhesion testing machine and the free end of the tape into the other jaw. Operate the movable jaw at5.060.2mm/s[1260.5in./min].11.5After the movable jaw is started in motion,disregard the values obtained while thefirst25mm[1in.]of tape is mechanically e the average force obtained during peeling of the next50mm[2in.]as the adhesion value. 12.Test Method B—Adhesion to Backing of Single-Coated Tapes12.1Apply a sample of the tape under test to a rigid panel such as the standard stainless steel panel.Rollfirmly.Apply a second strip of the tape to the backing of the strip on the test panel as described in11.2taking care to align the edges of the second specimen with those of the strip in the test panel. Complete testing as described in11.3-11.5.13.Test Method C—Adhesion of Double-Coated Tape 13.1Face Side—Follow the procedure of11.1-11.3,then remove the liner and superimpose on the test strip a strip of nominal0.025-mm[0.001-in.]thick polyesterfilm,as wide as or slightly wider than the double-coated tape.Apply thisfilm in the manner of applying the double-coated test strip to the panel so that the roller makes the actual application of thefilm to the double-coated tape.N OTE6—The two passes of the roller in applying polyesterfilm may be made using the hand roller.The rolling rate may be increased to50mm/s [2in.]/s.Continue in accordance with11.4and11.5.13.2Liner Side—Adhere the face side of the specimen to a strip of nominal0.025-mm[0.001-in.]thick polyesterfilm in the manner described in11.2so that the roller makes actual application of the tape to thefilm.Trim thefilm to be as wide as or slightly wider than the tape.Remove the liner.Continue in accordance with11.1-11.5.14.Test Method D—Adhesion to Liner of Double-Coatedand Single-Coated Tapes14.1Double-Coated Tapes—Follow11.1.Apply125mm[5 in.]of one end of the specimen to the panel with the adhesive side(face side)down.Make four passes with the roller,twice in each direction at a rate of1060.5mm/s[2460.5in./min]. Separate the liner from the tape at the free end and cut away the free tape.Do not disturb the line adhered to the tape on the panel.Double back the liner and proceed in accordance with 11.4and11.5.14.2Single-Coated Tapes—Follow11.1.Apply a strip of double-coated tape as wide as the specimen,the full length of the panel.Remove the liner from the single-coated tape. Superimpose125mm[5in.]of one end of the specimen, backing side down,against the double-coated tape on the panel.Make four passes with the roller,twice in each direction at a rate of1060.5mm/s[2460.5in./min].Separate the liner from the tape at the free end and cut away the free tape.Do not disturb the liner adhered to the tape on the panel. Double back the liner and proceed in accordance with11.4and 11.5.15.Test Method E—Adhesion of Adhesive TransferTapes15.1Face Side—Follow procedure of11.1-11.3,then re-move the liner and superimpose on the test strip a strip of nominal0.025-mm[0.001-in.]thick polyesterfilm,as wide as or slightly wider than the adhesive transfer tape.Apply this film in the manner of applying described in11.2so that the roller makes the actual application of thefilm to the adhesive transfer tape.Proceed as described in11.4and11.5.15.2Liner Side—Apply to the face side of the adhesive transfer tape a trip of nominal0.025-mm[0.001-in.]thick polyesterfilm.Make two passes of the roller using a hand roller of the same size.The roller rate may be increased to50 mm/s[2in.]/s.Remove the liner from the tape and apply to a standard test panel as described in11.2and11.3.Proceed as described in11.4and11.5.N OTE7—In spite of its apparent simplicity,the use of this test method is rather delicate and involves the use of great care in following the procedure as written to give coherent and identical results between one laboratory and another,as well as between one operator and another. 16.Test Method F—Single Coated Tapes at90°Angle 16.1Prepare specimen for testing as described in11.1-11.3.16.2Double back the folded end of the tape at a90°angle and peel25mm[1in.]of the tape from the panel.Place the panel into afixture clamped to the moving jaw of the adhesion tester so that it will maintain a peeling angle at90°during the peeling of the next75mm[3in.]of tape and the free end of the tape into the other jaw.Operate the moving jaw at5.060.2 mm/s[1260.5in./min].16.3Proceed as described in11.5.17.Calculation17.1In the inch-pound system,if observed pull value is not in Newtons(N),convert to N per10mm by converting the pull value to N and dividing by the width of the tape,mm,and multiplying by10.In the English System,if the observed value is not in ounces,convert to ounces and divide by the specimen width.18.Report18.1Report the following information:18.1.1Statement that these test methods were used and indication of any deviations from the test methods as written, 18.1.2Identification of the source of each roll of tape tested, 18.1.3Description of any anomalous behavior during test-ing(such as adhesive transfer or splitting),18.1.4Peel adhesion value,N/10mm to the nearest0.1 N/10mm[oz/in.to the nearest1oz/in.].Use actual specimen width in calculations,18.1.5Identification of the test method used(A,B,C,D orE)and,if C or E,whether face side or liner side,18.1.6Dwell time,if less or greater than the standard1min, 18.1.7Test specimen widths,if different from9.1,and18.1.8Conditions of test,if other than2361°C[73.46 3.5°C]or5065%RH.19.Precision and Bias19.1Summary—The difference between two single obser-vations should not exceed18.8%of the average of the two observations in95out of100cases when both observations are taken by the same well-trained operator using the same piece of test equipment and the specimens randomly drawn from the same sample of rger differences may occur under all other circumstances.The true value of peel adhesion at180°angle can only be defined in terms of a specified test method. Within this limitation,Test Methods D3330/D3330M has no known bias.The bias for this summary and for evaluations made under other conditions are explained in19.2-19.5.N OTE8—Of the six methods in these test methods only Test Method A was used in determining the precision.It is believed that the precision for the other test methods would be similar.It would probably not apply to Test Method C.19.2Interlaboratory Test Data7—An interlaboratory study was made in1980in which randomly drawn samples of two materials were tested in each of six laboratories.Two operators in each laboratory each tested3specimens from each of3rolls of each material.The components of variance for peel adhesion at180°results expressed as coefficients of variation(see Note 8)and were calculated to be as follows:Specimens of the Same MaterialSpecimens of Different MaterialSingle-operator component 4.8%of the average9.7%of the average Within-Laboratory component 2.1%of the average0%of the average Between-Laboratory component9.0%of the average 3.7%of the average Replication component 4.9%of the average 4.9%of the average19.3Critical Differences—For the components of variance reported in19.2,two averages of observed values should be considered significantly different in the95%probability level if the difference equals or exceeds the critical difference shown in Table1.N OTE9—The tabulated values of the critical differences and confidence limits should be considered to be general statements particularly with respect to between-laboratory precision.Before a meaningful statement can be made about two specific laboratories,the amount of statistical bias between them,if any,must be established with each comparison being based on recent data obtained on specimens randomly drawn from one sample of the material to be evaluated.19.4Confidence Limits—For components of variance re-ported in19.2,single averages of observed values have the following95%confidence limits.See Note9and Table2. 19.5Bias—No justifiable statement can be made on the bias of Test Method D3330/D3330M for testing peel adhesion since the true value cannot be established by accepted referee method.20.Keywords20.1adhesion to backing;adhesion to liner;peel adhesion at 90°angle;peel adhesion at180°angle;pressure sensitive tape7Supporting data have beenfiled at ASTM International Headquarters and may be obtained by requesting Research Report RR:D01–1002.TABLE1Critical Difference,Percent of Grand Average for theConditions Noted A,BNumber ofObservations inEach AverageSingle-OperatorPrecisionWithin-LaboratoryPrecisionBetween-LaboratoryPrecision Specimens of the Same Material:118.819.742.5514.515.629.41013.915.029.1 Specimens of Different Material:130.130.131.8528.028.029.41027.327.329.1A The critical differences were calculated using t=1.960which is based on infinite degrees of freedom.B To convert the values of the critical differences to units of measure,multiply the average of the two specific sets of data being compared by the critical differences expressed as a decimal fraction.TABLE2Width of95%Confidence Limits,Percent of the Grand Average for the Conditions Noted A,BNumber ofObservations inEach AverageSingle-OperatorPrecisionWithin-LaboratoryPrecisionBetween-LaboratoryPrecision Specimens of the Same Material:1613.3613.9630.05610.3611.0620.81069.8610.6620.6 Specimens of Different Material:1621.3621.3622.55619.8619.8620.810619.3619.3620.6A The confidence limits are calculated using t=1.960which is based on infinite degrees of freedom.B To convert the values of the confidence limits to units of measure,multiply the average of the specific set of data which is of interest by the confidence limits expressed as a decimalfraction.ASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentioned in this ers of this standard are expressly advised that determination of the validity of any such patent rights,and the risk of infringement of such rights,are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed everyfive years and if not revised,either reapproved or withdrawn.Your comments are invited either for revision of this standard or for additional standards and should be addressed to ASTM International Headquarters.Your comments will receive careful consideration at a meeting of the responsible technical committee,which you may attend.If you feel that your comments have not received a fair hearing you should make your views known to the ASTM Committee on Standards,at the address shown below.This standard is copyrighted by ASTM International,100Barr Harbor Drive,PO Box C700,West Conshohocken,PA19428-2959, United States.Individual reprints(single or multiple copies)of this standard may be obtained by contacting ASTM at the above address or at610-832-9585(phone),610-832-9555(fax),or service@(e-mail);or through the ASTM website ().。

压敏胶带剥离强度测试标准. 范围这些测试方法主要用于压敏胶带剥离强度的测试。

方法：单面胶从标准钢板或其他类似表面的平板上°剥离的测试方法。

方法：单面背衬胶粘性的测试方法。

方法：双面胶与标准钢板粘性的测试方法。

方法：单面胶或双面胶与离型纸的粘性的测试方法。

方法：无基材胶带与标准钢板的粘性的测试方法。

方法：单面胶与标准钢板°剥离的测试方法。

这些测试方法是给定压敏胶带粘性测试的统一评定方法，这评定可以针对一卷，两卷之间或一批。

不同的基材和（或）胶质都会影响测定结果，因此，这些方法不适用不统一的胶质。

这些测试方法不适用于一些相对硬质的基材、衬里或在低强度下高粘性背胶的测试。

这些特性对测试结果有很大的影响，因而不能真正代表粘力。

测试数值用或英寸—磅做为单位，在每个单位系统中数值的规定都是不同的，因此，每个系统必须使用自己的单位。

这些标准没用强调在操作过程中可能会发生的所有安全隐患。

标准使用者有义务去建立一个安全健康的操纵规则。

.测试方法概要方法——单面胶°剥离——用可控压力把胶带粘贴到标准测试板上。

测试时，以恒定的速度°角从测试板上剥离。

方法——单面背衬胶的粘性——胶带式样一粘贴到测试钢板上，取另一式样粘贴到式样以的背面，然后按方法进行测试。

方法——双面胶表面粘性——把双面胶的正面贴到不锈钢板上，衬里面朝外。

撕去衬纸，贴一层（）的聚酯薄膜，接下来按方法进行测试。

衬里粘力——在双面胶的正面贴上的聚酯薄膜，然后撕去衬纸贴到不锈钢板上。

接下来的测试同方法。

方法——测试离型纸胶带（单面或者双面）的粘性——把胶带粘贴到测试钢板上，衬里面朝外。

同方法中单面胶从钢板上剥离类似，用同样的方法测试衬纸与胶粘剂的剥离强度。

方法——无基材胶带的粘力测试正面——把胶带贴到标准测试钢板上。

除去衬纸，贴上厚度为的聚酯薄膜形成一个背衬薄膜胶带试样。

按照方法进行剥离力的测试。

衬里面——把胶带正面贴上厚度为的聚酯薄膜，撕去衬纸贴后贴到钢板上按方法进行测试。

双面胶带的国标标准英文回答：ASTM D3330 Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape.ISO 8510-2:2014 Paper and board — Determination of tensile strength — Part 2: Constant rate of load tensile test method.JIS Z0237:2018 Testing methods for pressure-sensitive adhesive tapes.中文回答：双面胶带的国标标准。

ASTM D3330 粘压带剥离粘合强度标准试验方法。

ISO 8510-2:2014 纸和纸板拉伸强度的测定第 2 部分，恒定载荷拉伸试验方法。

JIS Z0237:2018 压敏胶带测试方法。

ASTM D3330 Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape.Scope.This test method covers the determination of the peel adhesion of pressure-sensitive tape to a standard stainless steel panel. The test is intended to measure the force required to remove the tape from the panel at an angle of 180°.Significance and Use.The peel adhesion strength of pressure-sensitive tape is an important property that indicates its ability to adhere to a surface under conditions of tension. This test method is widely used to characterize the performance of pressure-sensitive tapes and to compare the performance ofdifferent tapes.Procedure.1. Prepare a 1-inch wide test specimen by cutting a strip of tape from the roll.2. Apply the tape to a standard stainless steel panel, ensuring that the tape is applied evenly and without wrinkles.3. Allow the tape to dwell on the panel for a specified period of time (typically 24 hours).4. Peel the tape from the panel at an angle of 180° ata constant rate of 12 inches per minute.5. Record the force required to remove the tape.Report.The report shall include the following information:The type of tape tested.The test conditions.The peel adhesion strength in pounds per inch (N/m)。

ASTM-D3330剥离强度测试标准中文版压敏胶带剥离强度测试标准1. 范围1.1 这些测试方法主要用于压敏胶带剥离强度的测试。

1.1.1 方法 A：单面胶从标准钢板或其他类似表面的平板上180°剥离的测试方法。

1.1.2 方法B：单面背衬胶粘性的测试方法。

1.1.3 方法C：双面胶与标准钢板粘性的测试方法。

1.1.4 方法D：单面胶或双面胶与离型纸的粘性的测试方法。

1.1.5 方法E：无基材胶带与标准钢板的粘性的测试方法。

1.1.6 方法F：单面胶与标准钢板90°剥离的测试方法。

1.2 这些测试方法是给定压敏胶带粘性测试的统一评定方法，这评定可以针对一卷，两卷之间或一批。

1.3 不同的基材和（或）胶质都会影响测定结果，因此，这些方法不适用不统一的胶质。

1.4 这些测试方法不适用于一些相对硬质的基材、衬里或在低强度下高粘性背胶的测试。

这些特性对测试结果有很大的影响，因而不能真正代表粘力。

1.5 测试数值用 IS 或英寸—磅做为单位，在每个单位系统中数值的规定都是不同的，因此，每个系统必须使用自己的单位。

1.6 这些标准没用强调在操作过程中可能会发生的所有安全隐患。

标准使用者有义务去建立一个安全健康的操纵规则。

4. 测试方法概要4.1 方法 A——单面胶 180°剥离——用可控压力把胶带粘贴到标准测试板上。

测试时，以恒定的速度180°角从测试板上剥离。

4.2 方法 B——单面背衬胶的粘性——胶带式样一粘贴到测试钢板上，取另一式样粘贴到式样以的背面，然后按方法A进行测试。

4.3 方法C——双面胶4.3.1 表面粘性——把双面胶的正面贴到不锈钢板上，衬里面朝外。

撕去衬纸，贴一层 0.025mm（0.001in）的聚酯薄膜，接下来按方法A进行测试。

4.3.2 衬里粘力——在双面胶的正面贴上0.025mm 的聚酯薄膜，然后撕去衬纸贴到不锈钢板上。

接下来的测试同方法A。

压敏胶带剥离强度测试标准1、范围1。

1 这些测试方法主要用于压敏胶带剥离强度得测试、1。

1。

１ﻩ方法 A:单面胶从标准钢板或其她类似表面得平板上180°剥离得测试方法。

１、1。

2ﻩ方法B:单面背衬胶粘性得测试方法。

1.1。

3ﻩ方法C:双面胶与标准钢板粘性得测试方法。

1、1.4 方法D:单面胶或双面胶与离型纸得粘性得测试方法。

1.1。

５方法Ｅ:无基材胶带与标准钢板得粘性得测试方法。

１。

1。

6 方法F:单面胶与标准钢板90°剥离得测试方法、1。

2 这些测试方法就是给定压敏胶带粘性测试得统一评定方法,这评定可以针对一卷,两卷之间或一批。

1、3 不同得基材与(或)胶质都会影响测定结果,因此,这些方法不适用不统一得胶质。

1.4 这些测试方法不适用于一些相对硬质得基材、衬里或在低强度下高粘性背胶得测试、这些特性对测试结果有很大得影响,因而不能真正代表粘力。

1.５测试数值用 IS 或英寸—磅做为单位,在每个单位系统中数值得规定都就是不同得,因此,每个系统必须使用自己得单位、1。

６这些标准没用强调在操作过程中可能会发生得所有安全隐患。

标准使用者有义务去建立一个安全健康得操纵规则。

４、测试方法概要4、1 方法 A-—单面胶１80°剥离-—用可控压力把胶带粘贴到标准测试板上、测试时,以恒定得速度180°角从测试板上剥离。

4、2 方法B——单面背衬胶得粘性——胶带式样一粘贴到测试钢板上, 取另一式样粘贴到式样以得背面,然后按方法 A 进行测试。

4。

３方法C——双面胶4、３.1 表面粘性-—把双面胶得正面贴到不锈钢板上,衬里面朝外。

撕去衬纸,贴一层0、02５mm(0.001ｉn)得聚酯薄膜,接下来按方法A 进行测试。

4、3.2ﻩ衬里粘力——在双面胶得正面贴上0.０25mm 得聚酯薄膜,然后撕去衬纸贴到不锈钢板上。

接下来得测试同方法Ａ。

４.4 方法 D-—测试离型纸胶带(单面或者双面)得粘性——把胶带粘贴到测试钢板上,衬里面朝外。

pe膜剥离测试标准
PE膜剥离测试是一种常用的测试方法，用于评估聚乙烯（PE）薄膜的剥离性能。

以下是一般的PE膜剥离测试标准：
1. GB/T 8808-2014 "塑料薄膜和薄片的剥离强度测定法"
该标准适用于各种塑料薄膜和薄片（包括PE膜）的剥离强
度测定，采用平板试样，通过测试机械方法对试样进行拉伸，测量剥离强度。

2. ASTM D3330-04 "剥离强度测试方法"
该标准适用于聚乙烯薄膜和其他塑料薄膜的剥离强度测定，
采用标准试样和剥离速率进行测试。

3. ISO 16047:2003 "塑料膜或者层的表面剥离性测定"
该标准适用于塑料膜或层的表面剥离性测定，包括塑料袋、
塑料包装材料等。

这些标准中一般会规定试样的制备、测试装置的规格和方法以及数据的处理方法。

根据需要，可以选择合适的测试标准进行PE膜剥离测试。

胶粘剂剥离强度测试标准
胶粘剂剥离强度是指胶粘剂与基材之间剥离的力度。

胶粘剂剥离强度测试标准有多种，常见的标准包括以下几种：
1. ASTM D903-98: 标准试验方法，用于测定胶粘剂剥离强度的一般性能。

2. GB/T 2791-2020: 胶粘剂-剪切剥离试验方法，用于测定胶粘剂的剪切剥离强度。

3. ISO 11339: 纸和纸板-剥离强度的测定，用于测定纸和纸板上胶粘剂的剥离强度。

4. PSTC-101: 胶粘剂剥离强度的测定，由 Pressure Sensitive Tape Council (PSTC) 发布的标准试验方法。

这些标准都提供了详细的测试步骤和要求，包括试样准备、试验条件、设备规格等。

通过按照这些标准进行测试，可以确保胶粘剂剥离强度的可靠性和可比性。

℃,短期耐温可达149℃；剥离强度：1、90度剥离胶粘度（N/100MM），测试方法：ASTM D3330不锈钢丙烯酸聚碳酸酯ABS15分钟粘接后74381276672小时粘接后154558288贮存期限：在21℃和50%相对湿度条件下，原包装状态下自生产之日起保存期为24个月。

应用技术：粘接强度随胶粘剂与被粘表面接触面积的增大而增加，施加稳定的压力有助于胶粘剂与被粘表面的接触，从而加大粘接强度。

要达到最佳的粘接效果，粘接表面必须是洁净、干燥的，胶带应用的最佳温度范围是21-38℃,建议若初始粘接温度低于10℃时，不适于粘接，因此时的胶粘剂太硬，而无法牢固的粘接在物体上；但是，如果已经粘接上了，低温下的持粘力同样是令人满意的。

产品应用：3M9495LE双面胶在环保方面符合ROHS法规要求，适用于铭牌、装饰品、装饰件的粘接，即使是油漆表面，也有较强的粘性。

3M55230厚度:0.15,基材:白色半透明TISSUE、无纺布,耐温性：158℃,特点与应用:较55235厚,剥离力更优异。

粘接塑料,塑料垫片,Mylar片等。

3M55231厚度:0.15MM,基材:白色半透明TISSUE,特点与应用:高粘接强度，特别适用于泡棉的粘接。

3M55232厚度:0.15,基材:白色半透明可移除TISSUE,特点与应用:具有独特的容易移除性能。

适用于需要经常更换的零部件，如：打印机/复印机/传真机的硒鼓周边零部件。

3M55235厚度:0.1,基材:白色半透明TISSUE,特点与应用:超薄无纺布基材胶带，适合粘接塑料，塑料垫片，金属铝箔等。

3M55256厚度:0.05,基材:透明PET,温度：-4到121摄氏度,特点与应用:良好的耐热冲击，适合电脑屏幕边框，LCD 泡棉，元器件，电池绝缘体附件等粘接。

3M55262厚度:0.15,基材:透明PET,特点与应用:良好的耐热冲击，适合电脑屏幕边框的粘接，LCD泡棉粘接、元器件、电池绝缘体附件粘接。

ASTM D3330 中英文对照版Designation: D 3330/D 3330M – 00名称：D 3330/D 3330M-00Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape1压敏胶带剥离强度测试标准This standard is issued under the fixed designation D 3330/D 3330M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates theyear of last reapproval. A superscript epsilon (e) indicates an editorial change since the last revision or reapproval. 此标准是根据D 3330/D3330M 整理修订；名称后面的数字代表首发年份。

括号内为最近修订年份。

带有上标e 表示最后一次发行或修订时的改动之处。

1. 1. Scope1．1 范围1. 1.1 These test methods cover the measurement of the peel adhesion of pressure-sensitive tapes.1.1.1 这些测试方法主要是针对压敏胶带剥离强度的测试1. 1.1.1 Test Method A gives a measure of the adherence, whenpeeled at 180° angle, to a standard steel panel or to other surfaceof interest for a single-coated tape.（加载板）1.1.1.1 方法A 是压敏胶带从一标准金属板180°剥离测试方法；------------2. 1.1.2 Test Method B gives a measure of the adherence to the backing of a single-coated tape.2.1.1.2 方法B 是测试单面背衬胶的粘性3. 1.1.3 Test Method C gives a measure of the adherence of double-coated tape to a standard steel panel or other surface ofinterest.3.1.1.3 方法C 是双面背衬胶与标准金属板的粘性测试方法；4. 1.1.4 Test Method D gives a measure of the adherence of the release liner to the adhesive of either single-or double-coated tape.4.1.1.4 方法D 是测试单面或者双面背衬胶离型纸的粘性5. 1.1.5 Test Method E gives a measure of the adherence of an adhesive transfer tape to a standard steel panel or other surface ofinterest.5.1.1.5 方法E 是测试无基材胶带与标准金属板之间的粘性6. 1.1.6 Test Method F gives a measure of the adherence, when peeled at 90° angle, to a standard steel panel or other surface ofinterest for a single-coated tape.6.1.1.6 方法F 是测试胶带90°剥离方法；7. 1.2 These test methods provide a means of assessing the uniformity of the adhesion of a given type ofpressure-sensitiveadhesive tape. The assessment may be within a roll of tape, between rolls, or between production lots.7.1.2 这些测试方法，是胶带的统一的评定方法；----------8. 1.3 Variations in either the tape backing or the adhesive, or both, affect the response. Therefore, these test methods cannot beused to pinpoint the specific cause(s) of non-uniformity. 9. 1.4 These test methods may not be appropriate to test tapes having relatively stiff backings, stiff liners, or backings showinghigh stretch at low forces. These characteristics will result in a high variability for the test response which is not a true indicationof the real nature of the adhesive bond.10. 1.5 Values stated in either SI or inch-pound units are to be regarded separately as standard. The values stated in each systemmay not be exact equivalents, therefore, each system must be used independently without combining values in any way. 11. 1.6 These test methods are intended to replace AFERA 4001, EN 1939, PSTC-1,PSTC-2, PSTC-3 and PSTC-4.1.7 This standard does not purport to address all of the 1 These test methods are under the jurisdiction of ASTM Committee D-10 on Packaging and are the direct responsibility of Subcommittee D10.14 on Tape and Labels. Current edition approved Oct. 10, 2000. Published December 2000. Originally published as D 3330 – 76. Last previous edition D 3330/D 3330M – 99. Copyright . ASTM, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, United States. safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine theapplicability of regulatory limitations prior to use.2. Referenced Documents2.1 ASTM Standards: A 666 Specification for AusteniticStainless Steel, Sheet, Strip, Plate and Flat Bar2 D 996 Terminology ofPackaging and Distribution Environments3 D 3715/D 3715M Practice for Quality Assurance of Pressure-Sensitive Tapes3 D 4332 Practice for Conditioning Containers, Packages or Packaging Components for Testing3 D 5750 Guide for Width and Lengths of Pressure-Sensitive Tape3 E 122 Practice for Choice of Sample Size to Estimate a Measure of Quality for a Lot or Process42.2 AFERA Standard:5 4001 Self adhesive tapes – Measurement of peel adhesion2.3 European Norm:6 EN 1939 Self adhesive tapes – Measurement of peel adhesion from stainless steel or from its own backing 2.4 Pressure Sensitive Tape Council Standards:7 PSTC-1 Peel Adhesion of Single Coated Pressure-Sensitive Tapes at 180°AnglePSTC-2 Peel Adhesion for Single Coated Pressure-Sensitive Tapes at 90° Angle PSTC-3 Peel Adhesion of DoubleCoated Pressure-Sensitive Tapes at 180° Angle PSTC-4 Adhesion to Liner of Presure-Sensitive Tapes at 180° Angle1. 3. Terminology2. 3.1 Definitions—Terminology found in Terminology D 996 shallapply. 2 Annual Book of ASTM Standards, Vol 01.03.3 Annual Book of ASTM Standards, Vol 15.09.4 Annual Book of ASTM Standards, Vol 14.02.5 Association des Fabricants Européens deRubans Auto Adhesifs (AFERA), LAM, Laan Copes van Cattenburch 79, NL-2858 EW, The Hauge, Netherlands.6 European Norm, (EN); available from Comité Européen de Normalisation (CEN), Rue deStassart, 36, B-1050, Brussels, Belgium.7 Pressure Sensitive Tape Council (PSTC),400 North Michigan Ave., #2200, Chicago, IL 60611–4267.1. 4. Summary of Test Method测试方法概要2. 4.1 Test Method A—Single-Coated Tapes, Peel Adhesion at 180°Angle—A strip of tape is applied to a standard test panel (or other surface of interest) with controlled pressure. The tape is peeled from the panel at 180° angle at a specified rate, duringwhich time the force required to effect peel is measured.方法A 是压敏胶带的180°剥离。