CIM-F07N中文资料

IM RelayThe Best Rela ytionSlim line AND low profile2 pole telecom/signal relay, polarizedThrough Hole Types (THT), standard versionwith 5.08 mm, narrow version with 3.2 mm between the terminal rows orSurface Mount Type (SMT)Relay types:non-latching with 1 coil latching with 1 coilFeatures-Telecom/signal relay (dry circuit, test access, ringing)-Slim line10 x 6 mm, 0.39 x 0.24 inch -Low profile 5.65 mm, 0.222 inch -Minimum board-space 60 mm 2-Switching current 2 A- 2 changeover contacts (2 form C / DPDT)-Bifurcated contacts, gold plated-High sensitivity results in low nominal power consumption 140 mW for non latching 100 mW for latching version -High surge capability (1.2/50 µs and 10/700 µs) meets Bellcore GR 1089, FCC Part 68 and ITU-T K20³1500 V between open contacts ³ 2500 V between coil and contacts -High mechanical shock resistance up to 300 G functional up to 500 G survival Typical applications:-Communications equipmentLinecard application – analog, ISDN, xDSL,PABXVoice over IP -Office and business equipment -Measurement and control equipment -Consumer electronics Set top boxes, HiFi -Medical equipment Options:Surge capability ³ 2500 V between open contactsInsulation category:Supplementary insulation according IEC/EN 60950 and UL 1950Working voltage £ 300 Vrms Mains supply voltage SMT: 250 VrmsTHT: 200 VrmsRepetitive peak voltage 2500 V Pollution degree:External: 2Internal: 1Flammability classification:V-0Maximum operating temperature:85°CCSA-C22.2 No. 14-95 File No. 169679-1079886CSA-C22.2 No. 950-95UL 508 File No. E111441UL 1950 3rd ed.QC 160501-CH0001IEC/EN60950IEC Ref. Cert. No. 1176CECC 16501-003THT VersionMounting hole layoutView onto the component side of the PCB(top view)Terminal assignmentRelay - top view Non-latching type,not energized conditionDimensionsIM THT IM THT IM SMT IM SMT StandardNarrowGull WingsJ-Legsmminchmminch mminchL 10 ±0.080.393 ±0.00310 ±0.080.393 ±0.00310 ±0.080.393 ±0.00310 ±0.080.393 ±0.003W 6 ±0.080.236 ±0.0035.7 ±0.30.224 ±0.0126 ±0.080.236 ±0.0036 ±0.080.236 ±0.003H 5.65 -0.20.222 -0.008 5.85 -0.150.230 -0.0065.65 -0.20.222 -0.0085.65 -0.20.222 -0.008T 3.20.125 3.20.125N/A N/A N/AN/AT1N/AN/AN/A N/A 7.5 ±0.30.295 ±0.0112.8 ±0.20.110 ±0.007T2 5.08±0.10.200 ±0.0043.2±0.10.126 ±0.0065.08 ±0.10.200 ±0.0045.08 ±0.10.200 ±0.004D13.2 ±0.150.126 ±0.0063.2 ±0.150.126 ±0.0063.2 ±0.150.126 ±0.0063.2 ±0.150.126 ±0.006D22.2 ±0.150.087 ±0.0062.2 ±0.150.087 ±0.0062.2 ±0.150.087 ±0.0062.2 ±0.150.087 ±0.006Tw 0.40.0150.40.0150.40.0150.40.015S 0.3 ±0.050.011 ±0.0020.3 ±0.050.011 ±0.002N/AN/A N/AN/ASMT VersionGull WingsJ LegsSolder pad layoutView onto the component side of the PCB (top view)Gull WingsJ LegsLatching type, 1 coil reset conditionStandard versionNarrow versionStandard versionNarrow version1.5 1.13 3.40.1514016IM0032.1 6.80.3014064IM014.53.1510.30.45140145IM025 3.511.40.50140178IM0364.213.70.60140257IM049 6.320.40.90140574IM05128.427.3 1.201401028IM062416.845.62.402002880IM07non-latching 1 coillatching 1 coil1.5 1.13 4.1- 1.1310023IM4032.258.1- 2.2510090IM414.53.3812.1- 3.38100203IM425 3.7513.5- 3.75100250IM4364.516.2- 4.50100360IM449 6.7524.2- 6.75100810IM45129.0032.3- 9.001001440IM462418.0041.9- 18.002002880IM47Further coil versions are available on request.Ambient temperature t amb [°C]U I =Minimum voltage at 23° C after pre-energizing with nominal voltage without contact current U II =Maximum continous voltage at 23°The operating voltage limits U I and U II depend on the temperature according to the formula:U I tamb =K I · U I 23° Cand U II tamb =K Il · U Il 23° C t amb= Ambient temperatureU I tamb = Minimum voltage at ambient temperature, t amb U II tamb = Maximum voltage at ambient temperature, t ambk I , k II= Factors (dependent on temperature), see diagram* High Dielectric Version …C“All data refers to 23° C unless otherwise specified.Recommended soldering conditionsSoldering conditions according CECC 00802Vapor Phase Soldering: Temperature/Time Profile (Lead Temperature)Infrared Soldering: Temperature/Time Profile (Lead Temperature)Time (s)Time (s)T e m p e r a t u r e °CT e m p e r a t u r e °CPacking Dimensions in mm Tube for THT version - 50 relays per tube, 1000 relays per boxIM00GR3-1462037-7 IM00JR3-1462037-9 IM00TS3-1462037-5 IM00NS1-1462038-0 IM01GR0-1462037-1 IM01CGR0-1462038-4 IM01JR4-1462037-0 IM01TS0-1462037-4 IM01NS1-1462038-1 IM02GR0-1462037-9 IM02CGR0-1462038-1 IM02JR1-1462037-1 IM02TS1-1462037-3 IM02NS1-1462038-2 IM03GR1-1462037-4 IM03CGR0-1462038-2 IM03JR1-1462037-6 IM03TS1-1462037-8 IM03NS1-1462038-3 IM04GR4-1462037-2 IM04JR4-1462037-4 IM04TS4-1462037-1 IM04NS1-1462038-4 IM05GR3-1462037-4 IM05CGR0-1462038-3 IM05JR4-1462037-5 IM05TS2-1462037-2 IM05NS1-1462038-5 IM06GR2-1462037-3 IM06CGR9-1462037-9 IM06JR4-1462037-6 IM06TS2-1462037-7 IM06NS1-1462038-6 IM07GR4-1462037-7 IM07JR4-1462037-8IM07TS3-1462037-0 IM07NS1-1462038-7 IM40GR5-1462037-1 IM40JR5-1462037-2 IM40TS5-1462037-0 IM40NS1-1462038-8 IM41GR5-1462037-4 IM41JR5-1462037-5 IM41TS5-1462037-3 IM41NS1-1462038-9 IM42GR3-1462037-1 IM42JR5-1462037-7 IM42TS5-1462037-6 IM42NS2-1462038-0 IM43GR5-1462037-9 IM43JR6-1462037-0 IM43TS5-1462037-8 IM43NS2-1462038-1 IM44GR6-1462037-2 IM44JR6-1462037-3 IM44TS6-1462037-1 IM44NS2-1462038-2 IM45GR6-1462037-4 IM45JR6-1462037-5 IM45TS3-1462037-2 IM45NS2-1462038-3 IM46GR6-1462037-7 IM46JR6-1462037-8 IM46TS6-1462037-6 IM46NS2-1462038-4 IM47GR7-1462037-0 IM47JR7-1462037-1 IM47TS6-1462037-9 IM47NS2-1462038-5Relay Code TycoPart Number Relay Code TycoPart NumberOrdering InformationIM Relays4th generation slim line – low profile polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with1 coil. Nominal voltage range from 1.5... 24 V, coil power consumption of 140... 200 mW, latching relays with 1 coil 100 mW. The IM relay is available as through hole and surface mount type (J-Legs and Gull Wings) and capable to switch loads up to 60 W/62,5 VA. Dielectric strength fulfills the Bellcore requirements according GR 1089 (2,5 kV –2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The IM is CECC/ IECQ approved and certified in accordance with IEC/EN 60950 and UL1950. Dimensions approx. 10 x 6 mm board space and 5.65 mm height.P2 Relays3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption 140 mW, latching relays with 1 coil 70 mW. The P2 relay is available as through hole or surface mount type and capable to switch currents up to 5 A. Dielectric strength fulfills the Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx. 15 x 7,5 mm board space and 10 mm height.FX Relays3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 coil. Nominal voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high sensitive version, 140... 300 mW for the standard version, latching relays with 1 coil 100 mW. The FX2 relay is available as through hole type and capable to switch loads up to 60 W/62,5 VA. Dielectric strength fulfills the Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The FX2 is CECC/IECQ approved and certified in accordance with IEC/EN 60950 and UL1950. Dimensions approx. 15 x 7,5 mm board space and 10,7 mm height.FT2 / FU2 Relays3rd generation non polarized, non latching 2 c/o telecom relay with bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power consumption 200 ... 300 mW. Most sensitive 48 V relay. Available as through hole and surface mount type. Dielectric strength fulfills the Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The FT2/FU2 is CECC/IECQ approved and certified in accordance with IEC/EN 60950 andUL1950. Dimensions approx. 15 x 7,5 mm board space and 10 mm height.FP2 Relays3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 48 V, coil power consumption of 80 ...260 mW for the high sensitive version, 140... 300 mW for the standard version, latching relays with 1 coil 100 mW.. The FP2 relay is available as through hole type and capable to switch loads up to30 W/62,5 VA. Dielectric strength fulfills FCC part 68 (1,5 kV – 10 / 160 µs). The FP2 is CECC/IECQ approved. Dimensions approx.14 x 9 mm board space and 5 mm height.MT2 / MT42nd generation non polarized, non latching 2 c/o and 4 c/o telecom and signal relay with bifurcated contacts. Nominal voltage range from 4.5 ... 48 V, coil power consumption 150/200/300/400 and550 mW, and 300 mW (MT4). Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV – 10 / 160 µs) for both and the Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs) the MT4 only.Dimensions MT2 approx. 20 x 10 mm board space and 11 mm height, MT4 approx. 20 x15 mm board space and 11 mm height.D2n Relays2nd generation non polarized 2 c/o relay for telecom and various other applications. Nominal voltage range from 3 ... 48 V, coil power consumption from 150 .... 500 mW. The D2n relay is capable to switch currents up to 3 A. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx.20 x10 mm board space and 11,5 mm height.P1 RelaysExtremely sensitive, polarized 1 c/o relay with bifurcated contacts for a wide range of applications, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption 65 mW, latching relays with 1 coil 30 mW. The P1 relay is available as through hole or surface mount type and capable to switch currents up to 1 A. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx.13 x 7,6 mm board space and 7 mm height for THT or 8 mm height for SMT version.W11 RelaysLow cost, non polarized 1 c/o relay for various applications. Nominal voltage range from 3 ... 24 V, coil power consumption 450 mW, sensitive versions 200 mW. The W11 relay is capable to switch currents up to 3 A. Dielectric strength 1000 Vrms. Dimensions approx. 15,6 x 10,6 mm board space and 11,5 mm height.Reed RelaysHigh sensitive, non polarized relay for telecom and various other applications, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal voltage range from 5 ... 24 V, coil power consumption 50...280 mW for 1 n/o and 125 ... 280 mW for 2 n/o or 1 c/o versions. Reedrelays are available in DIP or SIL housing and capable to switch currents up to 0,5 A. Integrated diode and/or electrostatic shield optional. Dielectric strength 1500 Vdc. Dimensions approx. 19,3 x 7 mm board space and 5 ... 7,5 mm height for DIP or 19,8 x 5 mm board space and 7,8 mm height for SIL version.Cradle RelaysExtremely reliable and mature relay family of 1st generation for various signal switching applications. Available as non polarized, polarized / latching and relay with AC coil. The benefit is the possibility of combining various contact sets from 1 up to 6 poles, single and bifurcated contacts, different contact materials with a coil voltage range from 1,5 Vdc to 220 Vac. Cradle relays are available as dust protected and hermetically sealed versions, with plug in or solder terminals and are capable to switch currents up to 5 A. Forcibly guided (linked) contact sets optional. Dielectric strength 500 Vrms. Dimensions from approx. 19 x 24 to 19x35 mm board space and30 mm height.Other RelaysWe offer a variety of different relay families for maintenance and replacement purposes. These relays are up to 60 years old now, such as Card Relay SN (V23030 / V23031 series), Small General Purpose Relay (V23006 series), Small Polarized Relay (V23063 ... V23067 and V23163 ... V23167 series). Accessories like sockets, hold down springs, etc. optional.Tyco Electronics AXICOM Ltd.Seestrasse 295 - P.O. Box 220CH-8804 Au-Wädenswil / Switzerland Phone +41 1 782 9111Fax +41 1 782 9080E-mail: axicom@Tyco Electronics Corporation POB 3608,Harrisburg, PA 17105, USA Phone +1 800-522-6752Tyco Electronics EC Trutnov s.r.o.Komenského 821CZ-541 01 Trutnov / Czech Republic E-mail: axicom@Tyco Electronics AMP GmbH Paulsternstrasse 26D-13629 Berlin / Germany Phone +49 30 386 38260Fax +49 30 386 38569E-mail: axicom@A p r i l 2002R e v . 3.01。

F007指纹门禁一体机使用说明书一、产品简介：F007是一款全金属结构的指纹门禁一体机。

它采用精密的电子线路和优良的生产工艺，高贵典雅，气度非凡。

本产品采用国际领先的指纹识别技术，安全可靠，是对出入安全要求极高的场所应用门禁的理想选择，广泛适用于商务机构、办公室、工厂、住宅小区等。

本产品配合红外遥控键盘和管理员密码进行指纹管理，操作简单方便。

最多可以存储120枚指纹，其中2枚管理员指纹，118枚用户指纹，每枚指纹分配一个ID号。

二、功能简介休眠功能本机配有人体感应装置，当有人接近时，本机即进入待机状态，人离开30秒后，本机自动进入休眠状态，进入休眠状态可以省电，且能延长使用寿命。

管理员遥控操作功能用红外遥控器操作，输入管理员密码进入编程状态，可进行如下操作：修改管理员密码、增加指纹、删除指纹、清空指纹、设置开门时间、设置防拆报警时间、解除防拆报警。

管理员指纹操作功能管理员指纹的ID号为1－2，不能用于开锁，其中ID号为1的指纹用于增加用户指纹和解除防拆报警，ID号为2的指纹用于删除用户指纹和解除防拆报警。

用户指纹操作功能用户指纹的ID号为3－120，仅用于开锁。

出门按钮操作功能外接出门按钮，用于开锁。

参数设置功能开门时间：0～10 秒，出厂时默认设置为5秒，管理员可以通过遥控器设置。

驱动电锁功能NC与COM接线端子控制阴极电锁，采用断电开锁方式，应设置开门时间为1-10秒。

N0与COM接线端子控制阳极电锁，采用通电开锁方式，应设置开门时间为0（实际为50mS）。

防拆报警功能当本机正常工作时被非法拆卸，蜂鸣器会发出连续的报警声，持续1分钟自动关闭。

重要信息请不要私自修理本机，如有问题，请返回厂家修理。

安装在墙上之前如果要打孔，请仔细检查暗线或线管，在钻孔或固定线夹的时候要使用安全眼镜。

如果产品升级，说明书将可能有所不同，恕不另行通知。

三、接口原理及接口参数继电器输出接口本机的NO、COM、NC分别接继电器的常开、公共、常闭输出管脚，与其内部电路完全隔离，开锁时继电器吸合，用于驱动阳极锁或阴极锁，触点输出电流为3A，接口原理，如图1所示。

VNP35N07FIVNB35N07/VNV35N07”OMNIFET”:FULLY AUTOPROTECTED POWER MOSFETJune 1998BLOCK DIAGRAM (∗)TYPE V clamp R DS(on)I lim VNP35N07FI VNB35N07VNV35N0770V 70V 70V0.028Ω0.028 Ω0.028Ω35A 35A 35As LINEAR CURRENT LIMITATION s THERMAL SHUT DOWNs SHORT CIRCUIT PROTECTION s INTEGRATED CLAMPs LOW CURRENT DRAWN FROM INPUT PIN sDIAGNOSTIC FEEDBACK THROUGH INPUT PINs ESD PROTECTIONsDIRECT ACCESS TO THE GATE OF THE POWER MOSFET (ANALOG DRIVING)sCOMPATIBLE WITH STANDARD POWER MOSFETDESCRIPTIONThe VNP35N07FI,VNB35N07and VNV35N07are monolithic devices made using STMicroelectronics VIPower M0Technology,intended for replacement of standard power MOSFETS in DC to 50KHz applications.Built-in thermal shut-down,linear current limitation and overvoltage clamp protect the chip in harsh enviroments.Fault feedback can be detected by monitoring the voltage at the input pin.110PowerSO-1012313D2PAK TO-263ISOWATT220(∗)PowerSO-10Pin Configuration :INPUT =6,7,8,9,10;SOURCE =1,2,4,5;DRAIN =TAB®1/13ABSOLUTE MAXIMUM RATINGSymbol Parameter Value UnitPowerSO-10D2PAKISOWATT220 V DS Drain-source Voltage(V in=0)Internally Clamped V V in Input Voltage18VI D Drain Current Internally Limited AI R Reverse DC Output Current-50AV esd Electrostatic Discharge(C=100pF,R=1.5KΩ)2000V P to t Total Dissipation at T c=25o C12540W T j Operating Junction Temperature Internally Limited o C T c Case Operating Temperature Internally Limited o C T st g Storage Temperature-55to150o C THERMAL DATAISOWATT220PowerSO-10D2PAKR t hj-ca se R t hj-a mb Thermal Resistance Junction-case MaxThermal Resistance Junction-ambient Max3.1262.5150162.5o C/Wo C/WELECTRICAL CHARACTERISTICS(T case=25o C unless otherwise specified)OFFSymbol Parameter Test Conditions Min.Typ.Max.Unit V CLAMP Drain-source ClampVoltageI D=200mA V in=0607080VV CLTH Drain-source ClampThreshold VoltageI D=2mA V in=055VV I NCL Input-Source ReverseClamp VoltageI in=-1mA-1-0.3VI DSS Zero Input VoltageDrain Current(V in=0)V DS=13V V in=0V DS=25V V in=050200µAµAI I SS Supply Current fromInput PinV DS=0V V in=10V250500µA ON(∗)Symbol Parameter Test Conditions Min.Typ.Max.Unit V IN(th)Input ThresholdVoltageV DS=V in I D+Ii n=1mA0.83VR DS(on)Static Drain-source OnResistance V i n=10V I D=18AV i n=5V I D=18A0.0280.035ΩΩDYNAMICSymbol Parameter Test Conditions Min.Typ.Max.Unitg fs(∗)ForwardTransconductanceV DS=13V I D=18A2025SC oss Output Capacitance V DS=13V f=1MHz V in=09801400pF VNP35N07FI-VNB35N07-VNV35N072/13ELECTRICAL CHARACTERISTICS(continued)SWITCHING(∗∗)Symbol Parameter Test Conditions Min.Typ.Max.Unitt d(on) t r t d(of f) t f Turn-on Delay TimeRise TimeTurn-off Delay TimeFall TimeV DD=28V I d=18AV gen=10V R gen=10Ω(see figure3)1003506502002006001000350nsnsnsnst d(on) t r t d(of f) t f Turn-on Delay TimeRise TimeTurn-off Delay TimeFall TimeV DD=28V I d=18AV gen=10V R gen=1000Ω(see figure3)5002.7104.38004.2166.5nsµsµsµs(di/dt)on Turn-on Current Slope V DD=28V I D=18AV i n=10V R gen=10Ω60A/µs Q i Total Input Charge V DD=12V I D=18A V i n=10V100nC SOURCE DRAIN DIODESymbol Parameter Test Conditions Min.Typ.Max.Unit V SD(∗)Forward On Voltage I SD=18A V in=0 1.6Vt r r(∗∗) Q r r(∗∗) I RRM(∗∗)Reverse RecoveryTimeReverse RecoveryChargeReverse RecoveryCurrentI SD=18A di/dt=100A/µsV DD=30V T j=25o C(see test circuit,figure5)25018nsµCAPROTECTIONSymbol Parameter Test Conditions Min.Typ.Max.UnitI lim Drain Current Limit V i n=10V V DS=13VV i n=5V V DS=13V 252535354545AAt dl im(∗∗)Step ResponseCurrent Limit V i n=10VV i n=5V357060140µsµsT j sh(∗∗)OvertemperatureShutdown150o C T j rs(∗∗)Overtemperature Reset135o CI gf(∗∗)Fault Sink Current V i n=10V V DS=13VV i n=5V V DS=13V 5020mAmAE as(∗∗)Single PulseAvalanche Energy starting T j=25o C V DD=20VV i n=10V R gen=1KΩL=10mH2.5J(∗)Pulsed:Pulse duration=300µs,duty cycle1.5%(∗∗)Parameters guarant eed by design/c haracterizationVNP35N07FI-VNB35N07-VNV35N073/13During normal operation,the Input pin is electrically connected to the gate of the internal power MOSFET.The device then behaves like a standard power MOSFET and can be used as a switch from DC to50KHz.The only difference from the user’s standpoint is that a small DC current(I iss)flows into the Input pin in order to supply the internal circuitry.The device integrates:-OVERVOLTAGE CLAMP PROTECTION: internally set at70V,along with the rugged avalanche characteristics of the Power MOSFET stage give this device unrivalled ruggedness and energy handling capability. This feature is mainly important when driving inductive loads.-LINEAR CURRENT LIMITER CIRCUIT:limits the drain current Id to Ilim whatever the Input pin voltage.When the current limiter is active, the device operates in the linear region,so power dissipation may exceed the capability of the heatsink.Both case and junction temperatures increase,and if this phase lasts long enough,junction temperature may reach the overtemperature threshold T jsh.-OVERTEMPERATURE AND SHORT CIRCUIT PROTECTION:these are based on sensing the chip temperature and are not dependent on the input voltage.The location of the sensing element on the chip in the power stage area ensures fast,accurate detection of the junction temperature.Overtemperature cutout occurs at minimum150o C.The device is automatically restarted when the chip temperature falls below135o C.-STATUS FEEDBACK:In the case of an overtemperature fault condition,a Status Feedback is provided through the Input pin. The internal protection circuit disconnects the input from the gate and connects it instead to ground via an equivalent resistance of100Ω. The failure can be detected by monitoring the voltage at the Input pin,which will be close to ground potential.Additional features of this device are ESD protection according to the Human Body model and the ability to be driven from a TTL Logic circuit(with a small increase in R DS(on)).PROTECTION FEATURESVNP35N07FI-VNB35N07-VNV35N07 4/13Thermal Impedance For ISOWATT220 Derating CurveTransconductance Thermal Impedance For D2PAK/PowerSO-10 Output CharacteristicsStatic Drain-Source On Resistance vs Input VoltageVNP35N07FI-VNB35N07-VNV35N075/13Static Drain-Source On Resistance Input Charge vs Input Voltage Normalized Input Threshold Voltage vs Temperature Static Drain-Source On Resistance Capacitance VariationsNormalized On Resistance vs TemperatureVNP35N07FI-VNB35N07-VNV35N07 6/13Normalized On Resistance vs Temperature Turn-on Current SlopeTurn-off Drain-Source Voltage Slope Turn-on Current SlopeTurn-off Drain-Source Voltage SlopeSwitching Time Resistive LoadVNP35N07FI-VNB35N07-VNV35N077/13Switching Time Resistive LoadCurrent Limit vs Junction Temperature Source Drain Diode Forward Characteristics Switching Time Resistive Load Step Response Current LimitVNP35N07FI-VNB35N07-VNV35N07 8/13Fig.2:Unclamped Inductive WaveformsFig.3:Switching Times Test Circuits For Resistive Load Fig.4:Input Charge Test CircuitFig.1:Unclamped Inductive Load Test CircuitsFig.5:Test Circuit For Inductive Load Switching And Diode Recovery Times Fig.6:WaveformsVNP35N07FI-VNB35N07-VNV35N079/13DIM.mm inch MIN.TYP.MAX.MIN.TYP.MAX.A 4.4 4.60.1730.181B 2.5 2.70.0980.106D 2.5 2.750.0980.108E 0.40.70.0150.027F 0.7510.0300.039F1 1.15 1.70.0450.067F2 1.15 1.70.0450.067G 4.95 5.20.1950.204G1 2.4 2.70.0940.106H 1010.40.3930.409L2160.630L328.630.6 1.126 1.204L49.810.60.3850.417L615.916.40.6260.645L799.30.3540.366Ø3 3.20.1180.126L2ABDEHGL6¯FL3G 1123F 2F 1L7L4ISOWATT220MECHANICAL DATAP011GVNP35N07FI-VNB35N07-VNV35N0710/13DIM.mminch MIN.TYP.MAX.MIN.TYP.MAX.A 4.3 4.60.1690.181A1 2.49 2.690.0980.106B 0.70.930.0270.036B2 1.25 1.40.0490.055C 0.450.60.0170.023C2 1.21 1.360.0470.053D 8.959.350.3520.368E 1010.280.3930.404G 4.88 5.280.1920.208L 1515.850.5900.624L2 1.27 1.40.0500.055L31.41.750.0550.068L2L3LB2BGEAC2DCA1P011P6/CTO-263(D2PAK)MECHANICAL DATAVNP35N07FI-VNB35N07-VNV35N0711/13DIM.mminch MIN.TYP.MAX.MIN.TYP.MAX.A 3.35 3.650.1320.144A10.000.100.0000.004B 0.400.600.0160.024c 0.350.550.0130.022D 9.409.600.3700.378D17.407.600.2910.300E 9.309.500.3660.374E17.207.400.2830.291E27.207.600.2830.300E3 6.10 6.350.2400.250E4 5.906.100.2320.240e 1.270.050F 1.25 1.350.0490.053H 13.8014.400.5430.567h 0.500.002L 1.201.800.0470.071q 1.700.067αo8o DETAIL ”A”PLANESEA TING αLA1F A1hADD1======E40.10A E1E3CQA==BBDETAIL ”A”SEATING PLANE====E261051eBH E M0.25====0068039-CPowerSO-10MECHANICAL DATAVNP35N07FI-VNB35N07-VNV35N0712/13VNP35N07FI-VNB35N07-VNV35N07Information furnished is believed to be accurate and reliable.However,STMicroelectronics assumes no responsibility for the consequencesof use of such information nor for any infringement of patents or other rights of third parties which may result from its use.No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics.Specification mentioned in this publication are subject to change without notice.This publication supersedes and replaces all information previously supplied.STMicroelectronics productsare not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.The ST logo is a trademark of STMicroelectronics©1998STMicroelectronics–Printed in Italy–All Rights ReservedSTMicroelectronics GROUP OF COMPANIESAustralia-Brazil-Canada-China-France-Germany-Italy-Japan-Korea-Malaysia-Malta-Mexico-Morocco-The Netherlands-Singapore-Spain-Sweden-Switzerland-Taiwan-Thailand-United Kingdom-U.S.A..13/13。