下载文档原格式
MicroTiles LED SpecificationsLearn about the product specifications. Due to continuing research, specifications are subject to change without notice.Physical specificationsLearn the physical specifications for MicroTiles LED.LED tilesLED wall controllerOctrollerAll measurements include the attached heatsink.Remote Power Rack Shelf (P/N: 161-131106-XX)Remote Power Rack Shelf (P/N: 161-147103-XX)Power requirementsLearn the power requirements for MicroTiles LED. LED wall controllerOctrollerLED tilesThe LED tiles are powered by the Octrollers over Ethernet cable.Power ratings for the Remote Power Rack Shelf (P/N: 161-131106-XX)The number of LED wall controllers that can be powered by a single Remote Power Rack Shelf depends on the voltage range of the input and the number of rectifiers. Consult your local Christie representative for further details.Power ratings for the Remote Power Rack Shelf (P/N: 161-147103-XX)Environmental specificationsLearn about the environment requirements for the product while operating and not operating.Non-operating environmentOperating environmentRemote Power Rack Shelf (P/N: 161-131106-XX)Remote Power Rack Shelf (P/N: 161-147103-XX)Product documentationFor installation, setup, and user information, see the product documentation available on the Christie website. Read all instructions before using or servicing this product.1.Access the documentation from the Christie website:•Go to this URL: http://bit.ly/2DE9cnu orhttps:///en-us/digital-signage/products/led-tiles/microtiles-led.•Scan the QR code using a QR code reader app on a smartphone or tablet.2.On the product page, select the model and switch to the Downloads tab.Related documentationAdditional information on this product is available in the following documents.•MicroTiles LED Product Safety Guide (P/N: 020-102824-XX)•MicroTiles LED Installation and Setup Guide (P/N: 020-102825-XX)•MicroTiles LED User Guide (P/N: 020-102835-XX)•MicroTiles LED Serial Commands Guide (P/N: 020-103050-XX)•MicroTiles LED Status System Guide (P/N: 020-103556-XX)•Replacing LED modules in a MicroTiles LED array (P/N: 020-103059-XX)•Removing the MicroTiles LED chassis (P/N: 020-102670-XX)RegulatoryThis product conforms to the latest regulations and standards related to product safety, environmental, and electromagnetic compatibility (EMC) requirements.Safety•ANSI/UL 60950-1-2007 – Information Technology Equipment – Safety – Part 1: General Requirements•CAN/CSA C22.2 No. 60950-1-07 – Information Technology Equipment – Safety – Part 1: General Requirements•CAN/CSA-C22.2 No. 62368-1: 2014 (2nd Edition) – Audio/video, information and communication technology equipment - Part 1: Safety requirements.•EN 60950:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 – Information Technology Equipment – Safety – Part 1: General Requirements•EN 62471:2008 (First Edition) – Photobiological Safety of Lamps and Lamp Systems•IEC 60950-1:2005 (2nd Edition); + Amendment 1:2009 + Amendment 2:2013 – Information Technology Equipment - Safety - Part 1: General Requirements•IEC/EN 62368-1: 2014 (2nd Edition) – Audio Video, IT & Communication Technology Equipment (AV/ICT) – Part 1: Safety Requirements.•IEC 62471:2006 (First Edition) – Photobiological Safety of Lamps and Lamp Systems•UL 62368-1: 2014 (2nd Edition) – Audio/video, information and communication technology equipment - Part 1: Safety requirements.Electro-magnetic compatibilityEmissions•CAN ICES-003 (A)/NMB-003 (A) – Information Technology Equipment (Including Digital Apparatus) – Limits and Methods of Measurement•CISPR 32:2012/EN 55032:2012, Class A – Electromagnetic Compatibility of Multimedia Equipment – Emission Requirements•FCC CFR47, Part 15, Subpart B, Class A – Unintentional Radiators•IEC 61000-3-2/EN61000-3-2: Limits for Harmonic Current Emissions•IEC 61000-3-3/EN61000-3-3: Limitations of Voltage Changes, Voltage Fluctuations, and FlickerImmunity•CISPR 24:2010/EN55024:2010 EMC Requirements – Information Technology Equipment –Immunity Characteristics – Limits and Methods of MeasurementsEnvironmental•China Ministry of Information Industry (along with 7 other Government Agencies) Order No.32 (01/2016) on the control of pollution caused by electronic information products, hazardoussubstances concentration limits (GB/T 26572 - 2011), and the applicable product markingrequirement (SJ/T 11364 - 2014).•EU Directive (2011/65/EU) on the restriction of the uses of certain hazardous substances (RoHS) in electrical and electronic equipment and the applicable official amendment(s).•EU Directive (2012/19/EU) on waste and electrical and electronic equipment (WEEE) and the applicable official amendment(s).•Regulation (EC) No. 1907/2006 on the registration, evaluation, authorization and restriction of chemicals (REACH) and the applicable official amendment(s).Technical supportTechnical support for Christie Enterprise products is available at:•North and South America: +1-800-221-8025 or ************************************•Europe, Middle East, and Africa: +44 (0) 1189 778111 or ********************************•Asia Pacific (********************************):•Australia: +61 (0)7 3624 4888 or **********************************•China: +86 10 6561 0240 or *************************************•India: +91 (80) 6708 9999 or ******************************•Japan: 81-3-3599-7481•Singapore: +65 6877-8737 or **********************************•South Korea: +82 2 702 1601 or ******************************•Christie Professional Services: +1-800-550-3061 or ***********************。
透明微晶玻璃、黑色微晶玻璃、耐高温微晶玻璃耐高温玻璃——透明微晶玻璃、黑色微晶玻璃(英文名Glass Ceramic，也称玻璃陶瓷)材料提供：国产微晶玻璃，常规最大尺寸350*450*4mm，也可以选择进口微晶玻璃，常规最大尺寸1954*1100,2100*1266，厚度4\5。
透明微晶玻璃介绍：由于其极低的热膨胀度，透明微晶玻璃不会受高温(760℃）的影响，也不受显著温度变化或温度差异的影响，且十分优越的耐热冲击性能。
另外，透明微晶玻璃具有良好的热辐射，特别是短波红外辐射透过性。
而正是在为火炉燃烧过程中释放的强烈热辐射为我们带了舒适暖意。
因此，微晶玻璃特别知合应用在既有高热能又需要良好透光性的场合，作为室内加热装置（如壁炉和火炉）的观察窗。
图 1 透明微晶玻璃 150 999 63668产品应用：◈室内加热/取暖器的视窗面板（燃油/燃气室内取暖器/炉、传统燃料的室内取暖器/炉）◈红外辐射加热/取暖器的面板◈加热电暖炉的盖板玻璃◈反光杯和高性能泛光照明灯的盖板◈红外烘干器的盖板◈投影仪的保护盖片◈隔紫外线护罩◈烤肉/烧烤设备的面板◈大功率泛光灯和反射器上耐高温的面板加工：①切割、②倒角、③钻孔、④丝印、⑤镀膜黑色微晶玻璃面板说明：由特殊微晶玻璃制成，该材料的最大特点是：可耐高达750℃的急剧升温。
微晶玻璃面板非常环保，不含砷、锑等有毒重金属。
它的主要原料是石英，这种原料在自然界取之不尽、用之不竭。
黑色微晶玻璃灶具面板非常坚固、耐受冲击，经久耐用。
灶具面板横向热传导低，靠近烹调区的地方温度相对较低，热量会直接传导至烹饪锅具。
图 2 黑色微晶玻璃 150 999 63668黑色微晶玻璃主要物理属性：◈热膨胀几乎为零；◈温度稳定性和耐久性好；◈机械稳定性高；◈系统优化的红外透射率；◈热传导率低；◈抗热冲击能力强。
产品特点补充说明：•◈能连续承受600℃高温5000小时而不破裂；•◈具有极高的热稳定性，即使温度骤变高达750℃时也能坦然面对；•◈横向导热性低•◈智能化一根据要求提供包括触摸传感器的智能用户界面•◈容易清洗，可毫不费力地清除其表面的污溃。
肖特微晶玻璃参数-概述说明以及解释1.引言1.1 概述概述部分的内容可以如下编写：肖特微晶玻璃是一种新型的玻璃材料，具有独特的结构和性能特点。
它可以在较低的温度下制备出具有高度有序的微晶结构，具有较高的抗热震性、抗压性和抗蠕变性能，透光性和电绝缘性能也优异。
因此，肖特微晶玻璃在各个领域都有广泛的应用前景。
本文将对肖特微晶玻璃的参数进行深入研究和探索。
首先，我们将介绍肖特微晶玻璃的定义和特点，包括其结构、成分和性能等方面的特点。
其次，我们将详细讨论肖特微晶玻璃的制备方法和工艺参数，包括烧结温度、烧结时间、冷却速率等参数的影响及其优化方法。
最后，我们将探讨肖特微晶玻璃在工业和科研领域的应用前景，并强调对肖特微晶玻璃参数的研究和探索的重要性。
通过对肖特微晶玻璃参数的深入研究和探索，我们可以更好地理解其制备过程和性能特点，为进一步优化制备工艺、提高产品质量和开发新的应用领域提供理论和实践基础。
本文的研究将有助于推动肖特微晶玻璃在多个领域的应用，为材料科学和工程技术发展作出贡献。
1.2文章结构文章结构部分的内容应包括对整篇文章的组织、篇章分布以及各个章节的主题和内容的介绍。
例如：文章结构本文按照以下结构进行安排。
首先，在引言部分，将对肖特微晶玻璃的参数进行简要概述，并介绍文章的结构和目的。
其次，在正文部分，将详细探讨肖特微晶玻璃的定义和特点。
包括该材料的基本概念、组成成分以及其在物理和化学性质上的特殊之处。
同时，也会介绍目前的制备方法和工艺参数，包括合成过程中的温度、时间、压力等关键因素，以及对其性能和品质的影响。
最后，在结论部分，将展望肖特微晶玻璃在工业和科研领域的应用前景，并强调研究和探索肖特微晶玻璃参数的重要性。
结论部分将对整篇文章进行总结，并提出未来进一步研究的方向和问题。
通过以上结构的安排，读者将能够全面了解肖特微晶玻璃参数的相关内容，从而对该领域的研究和应用有一个整体的认识。
接下来，我们将从引言部分开始，深入探讨这一主题。
285 WattPOLYCRYSTALLINE SOLAR MODULEIEC-STP-Wfw-NO1.01-Rev 2017©Copyright 2017 Suntech Power17.4%3800Pa 5400PaExtended wind and snow load testsModule certified towithstand extreme wind (3800 Pascal) and snow loads (5400 Pascal) *High module conversion efficiencyModule efficiency up to 17.4% achieved throughadvanced cell technology and manufacturing capabilities 2%Suntech current sorting processSystem output maximized by reducing mismatch losses up to 2% with modules sorted & packaged by amperage PID ResistantHigh PID resistantAdvanced cell technology and qualified materials lead to high resistance to PIDWithstanding harsh environmentReliable quality leads to a better sustainability even in harsh environment like desert, farm and coastlineCertifications and standards:0/+5W Positive tolerancePositive tolerance of up to 5W delivers higher output reliablityIEC 61215, IEC 61730, conformity to CESTP285 - 20/WfwSTP280 - 20/Wfw STP275 - 20/WfwSuperpoly * Please refer to Suntech Standard Module Installation Manual for details. **WEEE only for EU market.*** Please refer to Suntech Product Near-coast Installation Manual for details. **** Please refer to Suntech Product Warranty for details.Advanced Polycrystalline Perc technologyThe Perc cell uses back surface passivation and local BSFtechnology, which can improve cell efficiency by a large margin.IEC-STP-Vem-NO1.01-Rev 2014E-mail:***********************Current-Voltage & Power-Voltage Curve (285-20)Dealer informationMechanical CharacteristicsSolar Cell Polycrystalline silicon 6 inches No. of Cells 60 (6 × 10)Dimensions 1650 × 992 × 35mm (64.96 × 39.1 × 1.4 inches)Weight 18.3 kgs (40.3 lbs.)Front Glass 3.2 mm (0.13 inches) tempered glass Frame Anodized aluminium alloy Junction Box IP68 rated (3 bypass diodes)Output CablesTUV (2Pfg1169:2007)4.0 mm 2 (0.006 inches 2), symmetrical lengths (-) 1000mm (39.4 inches) and (+) 1000 mm (39.4 inches)ConnectorsMC4 compatibleTemperature CharacteristicsNominal Operating Cell Temperature (NOCT )45±2°C Temperature Coefficient of Pmax -0.41 %/°C Temperature Coefficient of Voc-0.33 %/°C Temperature Coefficient of Isc0.067 %/°CIEC-STP-Wfw-NO1.01-Rev 20171000 W/m800 W/m600 W/m400 W/m200 W/mInformation on how to install and operate this product is available in the installation instruction. All values indicated in this data sheet are subject to change without prior announcement. The specifications may vary slightly. All specifications are in accordance with standard EN 50380. Color differences of the modules relative to the figures as well as discolorations of/in the modules which do not impair their proper functioning are possible and do not constitute a deviation from the specification.STC: lrradiance 1000 W/m , module temperature 25 °C, AM=1.5;Best in Class AAA solar simulator (IEC 60904-9) used, power measurement uncertainty is within +/- 3%NOCT: Irradiance 800 W/m , ambient temperature 20 °C, AM=1.5, wind speed 1 m/s;Best in Class AAA solar simulator (IEC 60904-9) used, power measurement uncertainty is within +/- 3%。
HY015-12PCourtyard lighting.Small household lighting system.Street lighting.Portable solar power.All small power electrical devices & small PVType of cell DimensionsWeightFront Glass Frame Encapsulation Relative Humidity ResistanceSnow load parameters Poly-crystalline 156 x 156 mm (5 inches)370x360x20mm1.8Kg(4 lbs)Low-Iron Tempered Glass Aluminum AlloyGlass/EVA/Cells/EVA/TPT0 to 100%2400Pa227g steel ball fall down from 1m height and 60m/s windCharacteristics 15WOpen-Circuit Voltage(Voc) 21.7V Optimum Circuit Voltage(Vmp) 17.5VShort-Circuit Current(Isc) 0.95A Optimum Circuit Current(Imp) 0.87A Maximum Power at STC(Pmax) 15W Module Efficiency 10.42% Operating Temperature -40℃ to +85℃Maximum System Voltage 1000V DCPower tolerance ±3%STC: Irradiance 1000W/㎡, Module temperature 25 ℃, AM=1.5Power Your Green Life! Temperature CoefficientsNominal Operating Cell 45℃±5℃Temperature(NOCT)Temperature Coefficient of Pmax -0.45%/℃Temperature Coefficient of Voc -0.35%/℃Temperature Coefficient of Isc +0.05%/℃Maximum SeriesFuse/current rating 10AUnit:mm(14.6x14.2x0.8 inches)+1-626-737 1140ACOPOWER Solar Panel Installation Manuala. Installation should only be performed by qualified personnel. Each module is supplied with connectors used for system electrical connections. For the convenience of installation, ACOPOWER can provide customized cables as client required. Installers should assume all risks of injury that might occur during installation.b . Inappropriate transport and installation may break the module and void the warranty.To set up the mounting bracket of solar panel depends on its size. The bracket fixting hole must be on the basis of the pitch of hole of the solar panel module. The installation tools include: appropriate fasteners (screws, nuts) and the other installation tools.a. For Grounding installation, please use "Solar PanelSingle Arm Universal Pole Mounting Kit" to installaccording to the installation instructions guide.b. For simple installation, please use facile fixative bracket toset up. It is easy to adjust the angle. This installation can beset up on the floor or the wall.(a)(b)12V battery charging : 1pc24V battery charging : 2pc36V battery charging : 3pc48V battery charging : 4pcGrounding installation ：The length of the cable that connected with the solar panel junction box is 1M (39.37 INCH) ，which should be noted the polarity of the output. The standard wiring polarity is "face terminal box: left" - "right" + ", also the polarity can be viewed on the wiring.After installation of each solar panel, series and parallel connection must beset up based on design requirements of voltage and current. Series connection is "-" and "+", "-" and "+" operator,increased the charging voltage, FIG:(a). Parallel connection is "-" and "-" connected, "+" and "+" increased the charging current, FIG:(b). To use a different connection, solar panel can charge battery for 12V, 24V 36V 48V through the solar charge controller---The installation angle can be adjustable according to different geographical location, mostly associated with latitude. ACOPOWER Team has solar design experts can provide professional and free design！Email:*****************c. For rooftop installation, please choose“Solar Panel Mounting Z Bracket ”to Install on the roof and RV, Boats and other systems。
產品型號使用、安裝說明書IH 微晶調理爐IH -1030IH -2030IH -2038謝謝您購買並使用豪山牌IH 微晶調理爐使用前請仔細閱讀使用說明書，以便正確操作。
請確認保證書上已填妥購買日期及加蓋店章。
請妥善保存本使用說明書，以便隨時查閱。
如無特別註明，本說明書的內容對上述機種都適用。
本公司產品已投保產品責任險目錄使用說明：本說明書包含建議使用方式、操作說明，以及正確清潔與保養程序。
1.使用說明12.安全措施43.烹煮器具54.認識產品74.1 外觀及各部位名稱74.2 各型號烹飪區配置圖84.3 限制烹時間煮8 5.操作說明95.2 啟動電源95.1 操作面板95.3 火力段調整95.4 加速鍵功能105.5 計時器105.6 按鍵鎖115.7 餘熱指示125.8 自動關機125.9 暫停功能136.1 清潔IH微晶調理爐155.10 烹調指南146.2 每週清潔157.故障排除168.安裝方式178.1 安裝於廚房的安全措施178.2 工作檯挖孔尺寸178.3 主要性能規格198.4 連接電路20 6.清潔與維護151. 使用說明鍋子不可蓋住觸控鍵，否則IH微晶調理爐有可能自動停止運作。
IH微晶玻璃爐上方不可拿來堆置物品。
玻璃表面觸控功能區及手指上有液體時會降低操作靈敏度，此為正常現象，請用抹布擦乾後再操作。
如果因觸控鍵發生問題而無法關閉IH 微晶調理爐，應立即切斷電源，並連絡本公司服務人員。
觸控鍵上加了抗干擾功能，如果出現3秒以上無反應，請將手指移開玻璃表面10cm 以上再操作一次。
為避免家中有孩童或寵物可能碰觸到IH 微晶調理爐，導致危險燙傷，請啟動按鍵鎖。
本說明書隨附於產品包裝，應保持完整，並且在產品使用壽命期間確保可隨時查閱。
建議您在開始使用本產品前先行閱讀本手冊及所有說明書內容。
產品安裝必須由符合現行法律規範之合格人員進行。
本產品為家用產品，遵循現行CNS 12339、CNS 3765製造。
DE Warnhinweise GB Warnings FR AvertissementsBE VeiligheidsaanduidingenIT AvvertenzeES Indicaciones de advertenciaPTIndicações de aviso2a 2b 1a>DE<Montageprofilschiene Kollektorsicherungshaken FlachkollektorV26P / EKSV26P >GB<Mounting rail Collector securing hook Flat solar panel V26P / EKSV26P >FR<Rail de profilé de montageCrochet de fixation du capteur solaire Capteur plan V26P / EKSV26P >BE<Montageprofielrail Collectorborghaak Vlakplaatcollector V26P / EKSV26P >IT<Guida profilo di montaggio Gancio di fissaggio per collettoriCollettore piano V26P / EKSV26P>ES<Guía de perfil de montajeGancho de seguridad del captador Colector plano V26P / EKSV26P >PT<Calhas perfiladas de montagemGancho de segurança do colector Colector plano V26P / EKSV26P[FDM V26P ][FDM V26P][FDM V26P][FDM V26P]10.>DE< Um Instabilitäten zu vermeiden:Nach abschließender Kontrolle am Ende nochmals alle Schraubverbindungenprüfen und gegebenenfalls nochmals festschrauben.>GB< In order to prevent instability:After a final inspection, check all the screwed connections and tighten if necessary.>FR< Afin d'éviter les instabilités :Après un contrôle final, vérifiez à nouveau tous les raccords vissés et procédezsi nécessaire à un vissage d'appoint.>BE< Om instabiliteit te vermijden:Na afsluitende controle op het einde nogmaals alle schroefverbindingencontroleren en indien nodig nogmaals vastschroeven.>IT< Per evitare instabilità:Al termine del controllo, alla fine controllare nuovamente tutti i raccordie vite e se necessario serrarli di nuovo saldamente.>ES< Para evitar inestabilidad:Tras el control final, volver a comprobar las uniones atornilladas y, en caso necesario, reapretar.>PT< Para evitar instabilidade:Depois de concluída a verificação, controlar todas as uniões roscadas e apertá-las novamente, se necessário.R O T E X · K A S O L A R F D M V 26P · I r r t u m u n d t e c h n i s c h e Än d e r u n g e n v o r b e h a l t e n / S u b j e c t t o c h a n g e a n d c o r r e c t i o n · 008.16 290 99_00 · 10/2016。
Cava – 5.6mm Porcelain Tile PanelsWith looks as good as natural stone delivered straight from the quarry, Cava brings you all of the style withunsurpassable performance. Utilizing state of the art technology, each vein is rendered to remarkably authentic effect. The result, supersized stone looks guaranteed to be even better than the real thing.Bianco Lasa Bush Hammered - F7048 - 5.6 (Floors & Walls) - StockingNoir Desir Polished** - F0372 - 5.6 (Walls) - StockingNero Greco Polished** - F0373 - 5.6 (Walls) - StockingDiamond Cream Bush Hammered - F7049 - 5.6 (Floors & Walls) - StockingBianco Lasa Polished** - F0375 - 5.6 (Walls) - StockingNote! These samples depict base color and sheen. Please refer to our website for a more accurate depiction of veining and pattern.*See chart on the next page for further information**Polished finishes require apenetrating sealer prior to grouting.Please Note: Due to DCOF value, these tile panels are not recommended for applications in wet areas or areas where standing water may occur..O.Box1168,Crossville,TN38557•Phone:931.484.2110•Fax:931.456.2956•E-Mail:************************•Series and Color5.6 1M3M Cava Bianco Lasa Polished F0375.1M3M Cava Bianco Lasa Bush Hammered F7048.1M3M Cava Diamond Cream Bush Hammered F7049.1M3M Cava Noir Desir Polished**F0372.1M3M Cava Nero Greco Polished**F0373.1M3M** Polished Finishes require a penetrating sealer prior to grouting.Please Note: Due to DCOF value, these tile panels are not recommended for applications in wet areas or areas where standing water may occur.With looks as good as natural stone delivered straight from the quarry, Cava brings you all of the style with unsurpassable perfor-mance. Utilizing state of the art technology, each vein is rendered to remarkably authentic effect.• Available in 5.6 for floor and wall use• Unparalleled testing and training ensures high performance • Suitable for indoor surfacesLaminam 1 meter x 3 meter sheets *LAMINAM 5.6Piece 32.29 sq. ft./piece Crate 13 pc./crate Sq. ft./crate 419.77 sq. ft./crate Lbs./piece93.96 lbs./piece Lbs./crate1,422 lbs./crate (includes crate weight)Sq. ft. minimum order32.29 sq. ft.* Laminam arrives in oversized A-frames. These A-frames require proper receiving and handling equipment. Check with Crossville cutomer service for details (931-484-2110).Please refer to the Laminam technical guide online for receiving and handling information at ..O.Box1168,Crossville,TN38557•Phone:931.484.2110•Fax:931.456.2956•E-Mail:************************•FS-LAM-CAVA-19Distinctive valuesMain featuresDimensions 1000x3000mm Perfectly Flat 3+: 52 lbs / pc 5.6: 94 lbs / pcChemical resistanceCrossville ® Porcelain Tile Panels resists organic and inorganic sol-vents, disinfectants and detergents. It can be easily cleaned without affecting its surface characteristics; the only product that can attack the tile panels is hydrofluoric acid.Wear resistanceCrossville ® Porcelain Tile Panels is highly scratch proof and resistant to deep abrasion. The properties of the tile panels remain unchanged even after intensive use and frequent cleaning.High flexural strengthCrossville ® Porcelain Tile Panels has a high modulus of rupture. 3+ is 90 MOR and 5.6 is 50 MOR which are high values. Typical porcelain value is 35-37.Frost resistanceCrossville ® Porcelain Tile Panels average water absorption is 0.1% therefore it is frost resistant and suitable for any weather condition. Fire resistantCrossville ® Porcelain Tile Panels does not contain organic material therefore it is resistant to fire and high temperatures. In the event of fire it does not release smoke or toxic substances.Chromatic propertiesCrossville ® Porcelain Tile Panels does not contain organic pigments and is resistant to UV rays. Even if subjected to severe climate changes, the colors remain stable.GraffitiCrossville ® Porcelain Tile Panels are a graffiti resistant ceramic surface; it is easy to clean and even the strongest paints can be removed.Sustainable• The use of hybrid kilns that combine gas and electricity significantly reduces CO2 emissions in the atmosphere • Laminam has led the way to a photovoltaic system being installed on the roofs of its two Fiorano Modenese plants• Over a year, this photovoltaic system guarantees the production of around 1,050 GWh, thereby enabling the company to produce 10% of its energy requirements• I n terms of CO2 reduction, Laminam’s photovoltaic roof system eliminates the release of 525 tons of CO2 into the atmosphere annually• M ember of the Green Building Council Italia, this Italian association of manufacturing leaders strive to transform the building market towards environmental sustainability and to build livablecommunities. Partners of GBC Italia promote environmental, economic and social responsibility by innovating the way in which buildings are designed, built and used.Environmental statementLaminam is a dynamic, flexible and rapidly growing company that makes recycling and sustainability its duty.The revolutionary tile panel produced by Laminam does not neglect environmental friendliness: natural raw materials, sustainable technology, entirely recy-clable products are at the heart of the company’s green philosophy. Laminam is associated with the Green Building Council: created with natural materials, the tile panel does not release any substance into the environment and unbacked can be easily milled and recycled in other production cycles. Laminam tile panels are produced adopting sustainable technology which respects the entire ecosystem and is designed to reduce processing waste to a minimum and to limit the use of resources. The use of hybrid kilns that combine gas and electricity significantly reduces CO2 emissions in the atmosphere. Thanks to its large format Laminam optimizes the transport, thus reducing the emission of particulate matter which is harmful for the environment.Moreover, Laminam has recently completed its own photovoltaic roof, a plant that today has already produced 1 GWh of energy and that in one year is expected to produce an estimated 1.387 GWh, therefore reducing the CO2 emission by 617 tons in the atmosphere and allowing Laminam to produce 15% of its energy requirements.About Crossville ® Porcelain Tile PanelsRevolutionary technology concentrates three square meters into unbelievably thin porcelain: 3+ for interior walls and 5.6 for interiorfloors and interior and exterior walls. Versatile and flexible, it is a genuine skin for contemporary architecture, and is ideal in a host of applications.ApplicationsCrossville ® Porcelain Tile Panels are suitable for many indoor applications:Building sectorFloor and wall coverings, partition and storage walls, false ceilings, surface finishes and restoration, insulated panels and tunnels. Interior designSurfaces of kitchen and bathroom tops, cupboards, tables, desks, doors and furnishings in general.Shipbuilding sectorThe lightness and high technical properties of Laminam make it suitable for walls of cruise ships and sports crafts.Composite and structural panelsThe tile panels can be placed on top of each other or over other materials to create extremely light and particularly resistant composite and structural panels suitable in all those cases that require high resistance and reduced weight load on the surface.T echnical SpecificationsLaminam 3+ and 5.6mmTile panels are produced by wet grinding of clayish raw materials, granite, and metamorphic feldspar-containing rocks and ceramic pig-ments. They are compacted shaping in compactor, sintered at 1200° C with hybrid firing. The tile panels can be placed on top of each other or over other materials to create extremely light and particularly resistant composite and structural panels suitable in all those cases that require high resistance and reduced weight load on the surface..T echnical InfoLaminam 3+3+ tile panels are made up of the basic tile panel with the structure reinforced with fiberglass matting applied on the back using special adhesive.Thickness: 3mm plus .5mm fiberglass e of Laminam 3+• I nterior and exterior wall coverings applied using mortarLaminam 5.6mmLaminam 5.6mm is made out of the basic tile panel without reinforcing mesh, thickness 5.6mm.Use of Laminam 5.6mm• I nterior floor and interior and exterior wall coverings applied using mortar to above, below, and slab on grade concrete.• Polished finish requires a penetrating sealer prior to installation Information listed here is subject to change. Please refer to for the latest, most accurate information.。
产品说明书Product description产品名称：黑色透明电磁炉面板Product Name: Black Transparent Electromagnetic Oven panel广东科迪微晶玻璃实业有限公司Guangdong Kedi Glass-ceramic Industrial Co., Ltd. 1适用范围1 Scope of Application本说明书适用于黑色透明微晶玻璃板材。
This manual applies to black transparent glass ceramics panel.2 引用标准2 Reference Standard广东省行业标准，Q/PKT 02-2007，大板黑色透明微晶玻璃板材。
Guangdong Province Industry Standard, Q/PKT 02-2007Broad Black Transparent Glass-ceramic Plate.3 材质3 Material黑色透明微晶玻璃，满足电磁炉灶的特殊要求；Black transparent glass ceramics are used to meet the special requirements of electromagnetic oven标准特性将分别说明，同时适合RoHS规定。
Standard features which are to be described respectively, fit the RoHS rules.3.1 微晶玻璃的特性3.1 Characteristics of glass ceramics3.1.1 最高安全使用温度：3.1.1 Maximum Service Temperature:780℃，初期使用板材颜色将发生变化。
The original color of the plate will change at the temperature of 780 ℃.3.1.2 热冲击温度：3.1.2 Temperature of Thermal Shock780℃（耐热急变测试：加热保温30min后，立刻投入到水中无变化）。
Product descriptionProduct Name: Black Transparent Electromagnetic Oven panelGuangdong Kedi Glass-ceramic Industrial Co., Ltd.1 Scope of ApplicationThis manual applies to black transparent glass ceramics panel.2 Reference StandardGuangdong Province Industry Standard, Q/PKT 02-2007Broad Black Transparent Glass-ceramic Plate.3 MaterialBlack transparent glass ceramics are used to meet the special requirements of electromagnetic ovenStandard features which are to be described respectively, fit the RoHS rules.3.1 Characteristics of glass ceramics3.1.1 Maximum Service Temperature:The original color of the plate will change at the temperature of 780 ℃.3.1.2 Temperature of Thermal Shock780 ℃ (thermal shock resistance test: after heating the electric furnace and keeping the temperature at 780℃, place the plate in it for 30 minutes, the characteristics of the plate keeps stable when it is immediately thrown into the water).4 Specifications4.1 The size and shape of the electromagnetic stove panel are subject to the requirement diagram.4.2 Dimensions and test method of the product are measured in accordance with the design and the Vernier caliper.4.3 The amount of deformation is within 1.0mm (in the process of testing, the product should be placed on the horizontal platform, and measured by a plug gauge coordinated a standard ruler. Only ruler is allowed to be place on the plate.)4.4 The allowance error of thickness is within ±0.5mm.4.5 The allowance error of the straight edge is within ±0.5mm. The arc edge is smooth, without broken and flanging edge.4.6 The R angle of product is within ±0.3mm. The perpendicularity and parallelism is presented in Figure 1.a or a’ should be within 1mm:b or b’ should be within 1mm:Edge c should be alongside with the right angle.Figure 15 The Specification of Shape5.1 Panel: bright and uniform color without apparent sand inclusion, scratch, blot or edge broken.5.2 Screen-printing: the pattern and color are in accordance with the design for the customer.6 Physical and Chemical PropertiesThe reference of physical and chemical properties is in the following table:Index of Physical and Chemical PropertiesItem IndexThermal ShockNo deformation at 760℃ResistanceLinear Expansion-1.5~+5×10-7/℃（0~700℃）CoefficientDensity (Specific2.55±0.02g/cm3gravity)Acid resistance＜0.25mg/cm2Alkali resistance＜0.3mg/cm2Shock strength No deformation under specified conditions (110mm) Moh’s strength≥5.06.1 Thermal Properties6.1.1 Heat ResistanceIn non-screen printing condition, no deformation after 100h in the environment of 500℃.6.1.2 Thermal Shock ResistanceHeated for 30min in the temperature of 760℃, no deformation after immersion in water of 20℃.6.1.3 Thermal DeformationThe thermal expansion coefficient of the plate material is -1.5～+5×10-7/℃at the range of 30℃～700℃.Testing reference: GB/T16920-1997. The heating rate is 5℃/min in the medium of air oxygen. Testing equipment: NETZSCHDLL-402C.6.2 Mechanical Properties6.2.1 Moh’s StrengthThe Moh’s strength is 6.5, under the execution of term 6.5.4 in JC/T.6.2.2 Shock StrengthTesting is executed by the following mechanical strength test. The appearance of the plate remains the same after the testing.Products (test sample) is placed in accordance with that in Figure 2. Three continuous hits was exerted on the center point of test sample by a 525g solid steel ball of 50mm in diameter.Figure 26.3 Chemical Properties6.3.1 Acid ResistanceUnder non-screen printing condition, the corrosion rate of glass-ceramic plate is under 0.25mg/cm2 after 24h immersion in 5% hydrochloric acid solution at 90℃.6.3.2 Alkali ResistanceUnder non-screen printing condition, the corrosion rate of glass-ceramic plate is under 0.3mg/cm2 after 24h immersion in 5% sodium carbonate solution at 90℃.7 Screen-printing Property7.1 Temperature Property of Screen-printingAfter thermal shock test, stripping test was executed on the screen-printed part on the surface. Tapes were pull out from the surface at an angle of 45°,no appearance spalling happens.The adhesive force of the tape should be above 2.94N/10mm.7.2 Durability of the Screen-printingUnder normal serviceable condition, no discoloration or spalling happens. The limit temperature of the normal serviceable condition is 560℃.Scratching the panel surface with metal, glass etc. is forbidden. Remaining food residues is forbidden.7.3 The Abrasion Resistance of Screen-printingAbrasion test is implemented as the following. No scratch or change in gloss happens.Testing method:7.4 Alkali Resistance of Screening-printingCoating the surface with strong base solvent and cover with plastic wrap at 70℃after 5h, the color remains the same, and nothing abnormal, such as printing deformation happens.8 Testing MethodsFor dimension deviation, and appearance quality, random sampling of semi-products is used. For finished products, full check is applied.9 Logo and Packaging9.1 A control number is printed on the bottom of each product. The external packing of the product should be marked with factory name, address, registered trademarks, and weight.9.2 The corrugated case is used as the external and external packing, with the external packing sealed with tape and inner packing sealed with heat-resistance tape. Between the product pear wool paper is padded, avoiding any contact between products.10 Transportation and Storage10.1 In the process of transportation, vibration should be avoided. Awns should be used to avoid exposing the products to the sun and rain. Great care should be taken during loading and unloading.10.2 The product should be stored in the warehouse with fine air circulation and without corrosive gases, and the platform of storage should be 30cm above the ground. Normally the height of stock pile should be limited to 3 layers.。
