Printed BOPP and VMCPP lamination film for bread packaging-China Evergreen Packaging and Printing
- 格式:pdf
- 大小:491.91 KB
- 文档页数:3
我国BOPP薄膜的研究进展
一、BOPP薄膜的简介
BOPP薄膜(Biaxially Oriented Polypropylene Film),是由二聚异丙基丙烯酸(Polypropylene,PP)作为主要成分,经过双向拉伸和热压硬化,然后经过涂布等加工工艺,而制成的一种热塑性聚合物薄膜。
BOPP薄膜具有优异的机械性能,如拉伸性能高、强度大、延展性好,而且很轻,容易成型,具有良好的光泽、光学性能、可用于包装的最适宜薄膜。
因此,BOPP聚丙烯薄膜广泛应用于食品、药品、化学商品、饮料等包装领域。
二、BOPP薄膜研究进展
(1)薄膜拉伸技术进展
BOPP薄膜拉伸技术是关键的技术,它直接影响着薄膜的机械性能,包括抗拉强度、断裂伸长率以及横向拉伸等性能,这些性能可以改变薄膜的结构。
随着科学技术的发展,现代BOPP膜的拉伸技术得到了进一步的改进,有如下特点:
(1)多轴拉伸技术:目前,采用多轴拉伸技术,能够提高拉伸的效率,并且能够获得更高的拉伸稳定性;
(2)高温拉伸技术:一般BOPP膜的拉伸温度在130-150℃,采用高温拉伸技术,可以提高膜材的强度,并且还能够有效地提高拉伸效率;
(3)加热技术:除了采用高温拉伸技术,BOPP膜还采用加热技术来改变塑料材料的。
软包装材料对比介绍第一篇:软包装材料对比介绍1.PET,OPP(BOPP-MATOPP属OPP)—用于印刷,用NY,PE,CPP材料印刷时设计上应注意,线条不要太细,文字了民不能太细。
2.VMPET,VMOPP,PE,AL,OPP,NY3.CPP,PO,PE单层材料制袋都要表印,做量印时,袋子的边封力度不够,袋子左右两边要留1.5MM空白位,以防封边时压倒油墨边会爆口,PET,OPP带静电高注:1。
如果袋子四周的颜色不同,则设计时一定要将四周边留2-3MM的透明位。
2.条码的大小是可以缩放的,最大只能缩入两倍,条码的长度一般不能少于10MM,可用撞色做条码,但要用深色<紫色,咖啡色>3.实验室可测残留溶剂的是气象色谱分析仪,取样时的限量是0.2M平方。
4.气象色普仪,加温时温度通常与主机桶要加到80℃,时间为30分钟。
5.阴阳袋复合设计时最好不要超过6个色,拼版时颜色最多设计成8个色。
OPP与PET的区别和共性PET较脆,硬度好,不易皱,跟任何材料复合,封边不易皱,印刷材料中最好是用OPP,因为厚度为0.02MM以上。
1.透明度比较:OPP与PE在材料中最好2.耐温度:PE达到160℃,是耐温度最高点,OPP在120℃以上。
3.印刷性能:PET双面电晕法OPP要好一点,电晕是指电火花后有打晕值,把表面弄粗糙好上油墨,是增强附着力。
PET 42℃达晕:双面印OPP38℃达晕:单面印多4.PET捏时会响,OPP则不会。
OPP 与PE的区别与共性共性:1.都是热封性好,较适合做复合材料,做热封层。
2.拉伸性好,不易撕裂,都可印刷,印刷性能差点,只有单面电晕。
区别:1.OPP比PE透明度要好,复合后两者难以区别,PE比CPP光滑。
2.PE比OPP柔软度高,CPP硬点。
VMPET和VMOPP(镀铝)1.一般两者都不拿来印刷,一般放在三层复合的中间一层,如两屋复合就放在最外面一层(表面)2.VMOPP复合没有电晕较容易脱落,如双面电晕是的也不复合在中间,一般较难做倒。
BOPP薄膜简介
双向拉伸聚丙烯(Biaxially Oriented Polypropylene,BOPP)薄膜,也称为热延伸聚丙烯薄膜,是指由聚丙烯(PP)制成的薄膜,它是一种多
功能的包装材料。
BOPP薄膜具有良好的透明度,高强度,耐拉伸性,光滑,防水,耐老化性等特点。
BOPP薄膜的制造过程是在原料挤出时加入少量添加剂。
混合物被迫
经过织物板(slab),使其在热延伸机上形成薄膜。
BOPP薄膜首先经过
拉伸过程,然后它将被卷起,以便进行下一步加工。
注塑成型是BOPP薄膜的一种常见应用,可以用于包装糖果,果冻,
海藻等食品。
BOPP薄膜具有冲压性能,可以制作丰富多彩的图案和塑料
制品。
BOPP是热消解薄膜的一种,可以用于制作多种复合薄膜。
BOPP薄膜具有优良的热封性能,可以使热封机的热封温度降低,大
大提高热封质量。
BOPP薄膜具有很强的韧性,可以抵抗高压和大型外力
的拉伸,很少发生破裂。
BOPP薄膜具有优良的抗水性能,可以防止用户在使用过程中受潮变
质而破坏包装物。
BOPP薄膜可用于一系列用途,如非接触农产品包装,
食品包装,书籍包装,化妆品包装,家用纸品包装,药品包装,电子产品
包装等。
BOPP基本内容材料市场薄膜多层复合BOPP是“Biaxially Oriented Polypropylene”的简称,即双向拉伸聚丙烯薄膜。
它的生产是将高分子聚丙烯的熔体首先通过狭长机头制成片材或厚膜,然后在专用的拉伸机内,在一定的温度和设定的速度下,同时或分步在垂直的两个方向(纵向、横向)上进行的拉伸,并经过适当的冷却或热处理或特殊的加工(如电晕、涂覆等)制成的薄膜。
常用的BOPP薄膜包括:普通型双向拉伸聚丙烯薄膜、热封型双向拉伸聚丙烯薄膜、香烟包装膜、双向拉伸聚丙烯珠光膜、双向拉伸聚丙烯金属化膜、消光膜等。
各种薄膜的性能参数和主要用途如下:普通型BOPP薄膜用途:主要用于印刷、制袋、作胶粘带以及与其它基材的复合。
性能:*高透明度和光泽度*优异的油墨和涂层附着力*优异的水蒸汽和油脂阻隔性能*低静电性能常用厚度:15、19、20、25、28、35、38、40、45μm厚度公差:±3%(β射线测厚)性能单位典型数值拉伸强度MD MPa ≥130 TD ≥220断裂伸长率MD % ≤180 TD ≤65热收缩率MD % ≤4 TD ≤2.5摩擦系数Static ≤0.7 Kinematics ≤0.7雾度12-30μm % ≤1.5 31-60μm ≤2.5光泽度% ≥85润湿张力mN/m ≥38透湿量g/(m2·24h·0.1mm) ≤2BOPP热封膜用途:主要用于印刷、制袋等。
性能:*高清晰度和光泽度*优异的热封强度*优异印刷性能*良好的抗静电性能和爽滑性能常用厚度:20、25、30、40、45μm厚度公差:±3%(β射线测厚)性能单位典型数值拉伸强度MD MPa ≥120 TD ≥220断裂伸长率MD % ≤180 TD ≤80热收缩率MD % ≤5 TD ≤4摩擦系数静≤0.8 动≤0.8雾度% ≤4热封强度N/15mm ≥2.0润湿张力mN/m ≥38透湿量g/(m2·24h·0.1mm) ≤2.0BOPP香烟包装膜用途:用于高速香烟包装。
BOPP薄膜项目总结报告
一、BoPP薄膜项目概述
BOPP薄膜,全称Biaxially Oriented Polypropylene Film,是一种
由聚丙烯制成的双向定向薄膜,能够拉伸和收缩,可以把高温和低温的物
料连接起来,用作包装、缠绕和缝制等用途。
本次BoPP薄膜项目,主要
从以下几个方面进行研究:1)BoPP薄膜的生产工艺,包括膜制备、拉伸、热封、收缩和卷绕;2)BoPP薄膜的特性分析,包括厚度测量、耐压测试、抗张强度测试、拉伸属性测试、热封性测试等;3)BoPP薄膜的应用,包
括包装、缝制、缠绕等。
二、BoPP薄膜的生产工艺
1、膜制备:BOPP薄膜的生产主要采用聚丙烯(PP)为原料,经过混合、过滤,再经过挤出熔融制备成型,得到的膜厚度一般在25-100微米
之间,表面光滑,有良好的热封性能、拉伸性能和抗渗性。
2、拉伸:用于拉伸BOPP薄膜的机械装置通常由拉伸辊组和拉伸电机
组成,可以同时拉伸薄膜的横向和纵向,将原膜拉伸到50-500%,以改
善膜的性能。
3、热封:热封是指用热固性胶粘合剂对BOPP薄膜进行热处理,热封
性能主要取决于胶粘剂的粘合力和温度,是将薄膜分成不同宽度和厚度的
产品的必要工艺。
4、缩水:BoPP薄膜拉伸后会产生拉伸变形,因此在拉伸过程之后需
要对其进行。
CPP生产状况及专用料开发进展吴志生【摘要】聚丙烯流延膜(CPP)因具有生产速度快,薄膜透明性好,热封性优良等特点,在日用品和复合材料等领域得到了广泛应用.本文概况了聚丙烯流延膜的分类及生产工艺技术,介绍了国内生产厂商、设备和产能等生产情况.分析了国内专用料树脂开发状况,以及CPP对聚丙烯基础专用料树脂的要求.最后对聚丙烯流延膜的前景进行了展望,指出需要加快研究和开发步伐,在扩大生产量的同时,进一步提高产品档次.【期刊名称】《广州化工》【年(卷),期】2013(041)009【总页数】4页(P34-37)【关键词】聚丙烯流延膜;生产工艺;聚丙烯专用树脂【作者】吴志生【作者单位】中国石化扬子石油化工有限公司塑料厂,江苏南京210048【正文语种】中文【中图分类】TQ426.6聚丙烯薄膜按制法、性能和不同用途可分为聚丙烯流延膜(Cast Polypropylene film;CPP)、聚丙烯吹胀膜和双向拉伸聚丙烯薄膜三种。
聚丙烯流延膜是通过熔体流延骤冷生产的一种无拉伸、非定向的平挤薄膜。
与吹塑薄膜相比,其特点是生产速度快、产量高,薄膜透明性、光泽性、厚度均匀性优越,还具有良好的热封性、耐油性、耐蒸煮性,抗刮性和包装机械适用性好,同时由于是平挤薄膜,后续工序如印刷、复合等极为方便,因而广泛应用于纺织品、鲜花、食品、日用品的包装,同时也可用作高温蒸煮膜、复合膜内层热封材料和金属化基膜等[1-2]。
CPP 的生产有单层流延和多层共挤流延两种方式。
单层流延薄膜主要要求材料低温热封性能和挺度好。
多层共挤流延膜可分为热封层、支撑层、电晕层三层,在材料的选择上较单层膜宽,可单独选择满足各个层面要求的物料,赋予薄膜不同的功能和用途[3]。
1 聚丙烯流延膜分类聚丙烯流延膜可分为通用CPP(General CPP,简称GCPP)薄膜、金属化型CPP(Metalized CPP,简称MCPP)薄膜和蒸煮型CPP(Retort CPP,简称RCPP)薄膜。
bopp膜生产工艺流程英文回答:BOPP (Biaxially Oriented Polypropylene) film is a commonly used packaging material with a wide range of applications. The production process of BOPP film involves several steps to achieve the desired properties and quality.Firstly, the raw material, polypropylene resin, is melted and extruded through a flat die to form a molten film. This molten film is then stretched biaxially, both in the machine direction (MD) and transverse direction (TD),to orient the polymer molecules and improve the film's mechanical properties. The stretching process is usually done using a tenter frame or a bubble method.After stretching, the film is rapidly cooled to lock in the molecular orientation and prevent the film from shrinking. This is typically done by passing the film through a series of cooling rollers or by using a waterquenching system.Next, the film is corona treated on one or both sides to enhance its surface energy and improve its printability or adhesion properties. Corona treatment involves exposing the film to a high-frequency electrical discharge, which creates micro-level roughness on the surface and increases its wettability.Once the film is corona treated, it can be coated with various functional layers or laminated with other films to meet specific requirements. For example, a heat-sealable layer can be applied to enable easy sealing of the film in packaging applications. Other coatings or laminations can provide barrier properties, such as moisture resistance or oxygen barrier, to protect the packaged contents.Finally, the film is wound into jumbo rolls or converted into smaller rolls or sheets, depending on the end-use requirements. The finished BOPP film can then be used for flexible packaging, label applications, or other industrial applications.中文回答:BOPP(双向拉伸聚丙烯)膜是一种常用的包装材料,广泛应用于各个领域。
双向拉伸聚丙烯薄膜(简称 BOPP 薄膜)一、BOPP 定义膜(简称BOPP 薄膜),是一种新型优良的透明软包装材料。
它属结晶型聚合物产品,经双向拉伸后,由于分子链的作用,使结晶度增加,从而明显提高了拉伸强度、弹性模量、冲击强度、撕裂强度和曲折强度等性能,具有良好的透明性、光泽性、防潮性,还具有质地较轻、价格相对较低的优点。
BOPP 薄膜适用于各种包装、印刷、复合、镀铝等。
二、BOPP 分类按照用途可分为:普通型:又称光膜、平膜。
用于印刷、复合(透明型、消光型)、涂布(胶粘带及 PVDC涂复膜基膜)。
它是薄膜产品中用途最广、产量最大的品种;热封型: 用于普通包装,如香烟包装膜、三层热封膜、五层阻气膜、珠光膜、涂布热封膜等;标签膜: 用于商品标签,广告印刷,书刊杂志,瓶子标签和整体包装等;金属化膜: 用于真空镀铝;电容器膜:用于电容器和金属电容器。
三、BOPP 应用范围BOPP 薄膜由于其具有质轻、无毒、无臭、防潮、高透明度、高阻隔性、高抗冲强度、外形平挺、尺寸稳定等一系列优良的物理机械性能和印刷性能,生产工艺成熟、价格适宜、污染小,广泛应用于食品、医药、日用轻工、服装、香烟等包装材料领域,并大量用作复合膜的基材,不仅在众多的场合正在取代传统的纸包装,而且在许多包装领域已替代了 PE、PP、PVC 等普通包装薄膜,比替代产品双向拉伸聚酯薄膜(BOPET)、双向拉伸聚酰氨薄膜.四、膜种类细分:普通膜BOPP普通膜,又称光膜,适用于食品包装,纸张复合及一般性包装的印刷复合,是BOPP 产品中用量最大的产品。
平膜,又称光膜,是双向拉伸聚丙烯薄膜(BOPP 薄膜)系列产品中最常见的膜种之一,被广泛应用于各类印刷、复合制品中作各种食品、物品的包装使用。
其中,15μm 厚度的平膜主要用于书本等纸张方面的复合。
在光膜的消费中,胶带膜占据相当大的比例,相当一部分膜厂将胶带膜作为主打产品。
胶带膜的生产有这样几个特点:产量大、工艺简单、技术要求低。
Printed BOPP//VMCPP lamination film for bread packaging
BOPP//VMCPP lamination film is widely used for food packaging,such as bread, biscuits,candy etc.It is quite economical,this is why it is so widely applied in food packaging industries.Reverse printing on the BOPP film,it can well show the food manufacturer’s info and intension on his products and well promoting effects.With a thin layer of aluminum layer,moisture,air,and sunlight are well barried,which is absolutely essential for food protection and storage.
For CPP film,it bears aluminum layer on one side and the other side acting as heat sealing layer.CPP film is good at heat sealing that well prevent the bag from breakage and the inside content from leaking.
The item is BOPP28//VMCPP30,with structure as below
For BOPP Film,28microns is most common used item in lamination packaging.
For ink,we can provide normal temperature ink or high temperature ink,this is all up to customer application.
As to aluminum layer,we can achieve100A-1000A,this is enough for barrier performance in lamination packaging.
30microns CPP film is common used item,that helps to lower the cost.
1)Process of printing film
CPP Metallized
Metallized film is a kind of particular plastic film that is achieved by plating a very thin aluminum layer onto the surface of plastic film through special craftsmanship.In this meaning,metalized film is a flexible lamination packaging material.With some functions combined together,such as high barrier performance,clean,brightness,economic,and environment friendly,metalized films are widely used.In lamination packaging and printing,metallized PET film and metallized CPP film are mostly used.CPP acts as an aluminum bearing layer and inner heat sealing layer in this application.
For plastic transparent,so white background ink is absolutely essential.The usual sequence of color applied in reverse printing shall be
Lamination process is to combine two kinds of film together to create multifunctions that one film can not reach.For lamination,glue is very important to achieve certain peel strength.
Slitting process
Lamination film then be slitted into customer required width for auto packaging line.
2)Some points when customer adapt BOPP//VMCPP lamination film ①Heat sealing temperature on auto packaging machine
As BOPP film and CPP film are both made from PP granules,the thermoforming temperature of BOPP film and the heat sealing temperature of CPP film are mostly close,this may cause some kind of heat sealing problems on auto packaging machine.During heat transfer,BOPP film has to bear high temperature for some time,so the thickness of BOPP film shall not be much thinner than CPP film,this is for heat sealing concern.
The heat sealing temperature has to be exactly decided with heat sealing strength and packaging ually,it is better to apply low temperature sealing CPP film.②winter concern
For some areas that
are very cold in winter,the BOPP//VMCPP lamination film will perform worse as the brittleness of CPP film increases as the temperature lowers.CPP film is seldom used in temperature
20-30celsius degree under zero.The breakage rate of the bag will accordingly increases.
③Not good presentation effects
Both BOPP film and CPP film are of low stiffness,that cause they will not well present itself when placed on goods shelf.To achieve good presentation effects,PET film,aluminum foil or paper are recommended.。