test method和testing method

Standard VCS 1027,2719

Volvo Car Corporation

Issue 4 Page 1

Dept / Issued by 6857 Thomas Andersson Issue 4 Established 2004-01 UM Page 1(9)

The English language version is the original and the

reference in case of dispute.此英文版为初始版，如有争议，以英文版为准。

TEST METHOD试验方法

Fogging 雾化

Organic materials有机材料

Orientation 定位

As to its technical content, this standard conforms to

ISO 6452:2000.本标准技术内容符合ISO 6452:2000。

This issue differs from issue 3 in that sections 4, 4.5,

4.6, 5, 6.1.3, 6.1.4.2, 6.2.3 and 6.2.4.3 have been

changed.本问题在不同于问题3，因为章节4, 4.5,

4.6, 5, 6.1.3, 6.1.4.2, 6.2.3 和 6.2.4.3作了修改。

Contents

1 Field of application适用领域

2 Definition 定义

3 Reagents 试剂

4 Apparatus 设备

5 Test piece 测试件

6 Test procedure 测试步骤

6.1 Method F (reflectometric method, evaluation

of fogging using a glossmeter)方法F（反射法，

outgassing测试方法

Outgassing testing is a critical process for materials that are used in

vacuum applications, such as spacecraft components, semiconductor devices,

and high-performance electronics. Outgassing refers to the release of gases,

vapors, or volatile substances from a material when it is exposed to a vacuum

environment. These outgassed substances can contaminate the vacuum system,

compromise the performance of the equipment, or even pose a safety hazard.

There are several methods for testing the outgassing characteristics of

materials, with each method designed to simulate the conditions of a specific

application or environment. Some common outgassing testing methods

include:

1. ASTM E595 Standard Test Method for Total Mass Loss and Collected

Volatile Condensable Materials from Outgassing in a Vacuum Environment:

Quality Assurance Procedure

(品质保证程序) Doc. No.: QP-RTI-001

Version:

V0.0

Page: 1 of 9

FORM NO.: QP -001

通用可靠性测试指引

(General reliability test instruction)

制作人(Prepare By) ： David Tsang

批准人(Approve By）： Carrie Chueng

发出日期(Issue Date)： Aug. 05, 2010

Quality Assurance Procedure

(品质保证程序) Doc. No.:

QP-RTI-001

Version: V0.0

Page: 2 of

9

FORM NO.: QP -001

1. 目的(Purpose)

根据一般行业标准的可靠性测试要求及判定基准, 本文件旨在建立可靠性的一些测试项目、要求和操作说明来规范和指导PDP业务的可靠性。

(Basing on the general reliability test requirements and judgment criteria in industrial standard, this

document aims to set up the some test items, requirements and operation instruction for

standardization of reliability test of PDP business).

2. 适用范围(Scope)

本程序文件适用于与PDP有业务的产品. 如顾客没有提供测试标准或产品本身无特别安全测试要求,PDP及生产商可根据本程序内文的测试标准或指定的文件来进行可靠性测试。

Designation:G34−01(Reapproved2013)

StandardTestMethodfor

ExfoliationCorrosionSusceptibilityin2XXXand7XXX

SeriesAluminumAlloys(EXCOTest)1

ThisstandardisissuedunderthefixeddesignationG34;thenumberimmediatelyfollowingthedesignationindicatestheyearoforiginaladoptionor,inthecaseofrevision,theyearoflastrevision.Anumberinparenthesesindicatestheyearoflastreapproval.Asuperscriptepsilon(´)indicatesaneditorialchangesincethelastrevisionorreapproval.

ThisstandardhasbeenapprovedforusebyagenciesoftheDepartmentofDefense.

1.Scope

1.1Thistestmethodcoversaprocedureforconstantim-

mersionexfoliationcorrosion(EXCO)testingofhigh-strength

2XXXand7XXXseriesaluminumalloys.

NOTE1—Thistestmethodwasoriginallydevelopedforresearchanddevelopmentpurposes;however,itisreferenced,inspecificmaterialspecifications,asapplicableforevaluatingproductionmaterial(refertoSection14onPrecisionandBias).