LED出货报告

  • 格式:xls
  • 大小:22.50 KB
  • 文档页数:1

表面無臟污﹐雜質 No comtamination Attached 表面無划傷﹐划痕 (No Scratch on Surface) 與樣品一致 (According to Sample) 銀無拉絲和外溢不良 (No thread lug and spillage of silver) LED正負極方向正確 (Right direction of LED's poles) LED發光均勻一致無異常 (Light evenly,no abnormity) 無漏貼且牢固 (Hard sticking and no missing) 依客戶圖面測量 (According customer's Drawing) 依照客戶要求不損傷產品和 LED (Refer to customer's Drawing) 數量正確 (Proper Q'ty) 標識清楚正確 (Right and clear label) 出貨報告&尺寸報告完備 (OQA Report &Dimension Report)
目視 (Visual) 目視 (Visual) 目視 (Visual) 目視 (Visual) 目視 (Visual) 目視&測試治具 (Visual&Test jig) 目視&樣品 (Visual&Sample) 投影儀 (Prjector) 目視 (Visual) 目視&計數 (Visual&count) 目視 (Visual) 目視 (Visual)
MA.
REMARK﹕
Judgement(判定) Production (生產)
ACC Supervisor(品管)
REJ OQA(品管)
VER.﹕1.0
SOE
SOE P/N (SOE編號)
PRODUCTS
OUTGOING INSPECTION REPORT 成品出貨檢驗報告
Customer P/N (客戶編號) Production week 生產周期
Lot No﹕ (批號) Date(日期)
Product (品名) AQL﹕0.65 NO. Check item (檢驗項目)
MA.
品 管Biblioteka 外觀 (Cosmeti c)
MA.
MA.
第 二 聯
MA.
客 戶
LED粘附 尺寸及功 能 (Attachi ng dimensio n and function of led)
MI.
MA.
MA.
MI.
MI.
包裝 (Packing )
MA.
標識(Lable)
MA.
所需附文件完整 (Attached Documents)
Q'ty
(數量)
C=0 SPEC . (規格) Method (檢驗方法)
Sampling Q'ty (抽樣數量) Result (檢驗結果) AQL level 第 一 聯
臟物﹐雜質 (comtamination) 划傷,划痕 (Scratch) 白膠量適宜﹐無牽絲 (Proper glue,no spillage) 點銀無拉絲現象 (No thread lug when dotting silver) Led正負極方向貼附正確 (Right direction of LED) LED發光 (LED lighting) 貼附數量及牢固度 (Q'ty and hardness of attsched) 貼 附位置 (Assembly Position) 包裝方式 (Packing method) 數量(Q'ty)