SMARTpropr格兰登士柏机扩

Nota importanteSe trata de un modelo renovado, actualizado con una batería externa de 72V. El tiempo adicional de autonomía de ejecución está disponible conectando hasta cuatro módulos de batería extendida opcionales BP72VRM2U (se venden por separado).SMARTPRO 1950VA 1950 W 120 V UPS de línea interactiva con onda senoidal - 7 tomas de corriente, autonomía extendida ¡, opción de tarjeta de red, LCD, USB, DB9, ENERGY STARV2.0, montaje en rack/torre de 2U.NÚMERO DE MODELO:SMART2200RMXL2UProporciona respaldo completo por batería y salida de energía de onda sinusoidal pura para servidores, switches y otros equipos de TI distribuidos de alta gama.CaracterísticasRespaldo por Batería de 1.95kVA/1.95kW/120V para TI Distribuidas, Telecomunicaciones o EmpresasEste sistema UPS interactivo para instalación en rack proporciona confiable respaldo por batería y protección de energía de CA contra apagones, caídas de voltaje, sobretensiones y ruido en la línea que pueden dañar su equipo de TI o destruir la información. El SMART2200RMXL2U es el administrador de energía ideal para equipo de red de alta gama en rack, incluyendo servidores, teléfonos VoIP, almacenamiento de datos y switches PoE. El factor de potencia de uno garantiza la mayor cantidad de watts posible a cada especificación de potencia, de modo que pueda conectar más equipo.El Confiable Respaldo por Batería Ampliable lo Mantiene Operativo Durante ApagonesLos módulos de baterías VRLA Hot-Swap, reemplazables en campo le permiten trabajar durante fallas breves de energía y le dan tiempo suficiente para guardar archivos y apagar con seguridad su sistema en caso de un apagón prolongado. El cambio de alimentación de línea a batería ocurre en milisegundos para mantener la operación continua del equipo conectado sin interrupción o reinicio. Se dispone deautonomía adicional conectando hasta cuatro módulos opcionales de baterías extendidas (BP72VRM2U, vendidos por separado).La Tarjeta de Administración de Red de Plataforma LX Opcional Permite el Acceso Remoto 24/7La interfaz de red WEBCARDLXE (vendida por separado) permite una configuración y administración remotas completas, incluida la desconexión de carga, el reinicio de los equipos conectados y el apagado seguro. La función de Sondeo Automático basada en IP garantiza un tiempo de actividad continuo de la DestacadoProtege los equipos contraapagones, caídas de tensión,sobretensiones transientes yruido en la líneaqMantiene el equipo funcionando durante apagones a fin depermitir tiempo para el guardado de archivos y apagado seguro qEl factor de potencia unitariogarantiza la máxima potenciaposible con cada potencianominalqCertificación ENERGY STAR2.0 para ahorrar electricidad,reducir costos y proteger elmedioambienteqLa pantalla LCD de 2 líneas delpanel frontal con 10 pantallasseleccionables proporcionainformación detallada sobre elUPS y la alimentación del sitio qPara el monitoreo y controlremoto, se requiere elWEBCARDLXE (vendido porseparado). No compatible conWEBCARDLX.qEl Paquete IncluyeUPS Interactivo de 1950VA1950W 120VqCable USBqCable DB9qAccesorios para instalación enrackqSoportes para instalación entorreqInstrucciones de seguridadqGuía de Usuario AvanzadoqEspecificacionesred comunicándose con otros dispositivos de red, detectando la pérdida de conectividad y reiniciando automáticamente los equipos de TI. Los módulos opcionales EnviroSense2 (E2MT, E2MTDO y E2MTHDI, se venden por separado) ofrecen diversas opciones de monitoreo y control ambiental.Los Tomacorrientes NEMA 5-15R Protegen sus Componentes ConectadosUn tomacorriente L5-20R y seis 5-20R administrados alimentan al equipo conectado con una salida de CA de onda sinusoidal pura y le permiten monitorear el consumo de energía hasta el nivel del grupo de tomacorrientes. La energía provista por estos tomacorrientes está filtrada para proteger a los equipos conectados contra las dañinas sobretensiones y ruidos en la línea Cuatro tomacorrientes 5-20R están divididos en dos bancos de carga controlables en forma independiente que le permiten eliminar las cargas no críticas para extender la autonomía para cargas críticas. Los ventiladores de enfriamiento delanteros y traseros ayudan a proteger el equipo contra sobrecalentamiento.La Regulación Automática de Voltaje [AVR] Corrige Condiciones de Bajo y Alto VoltajeLa AVR protege su equipo contra daños incrementales del hardware, pérdida de información y problemas de desempeño causados por condiciones de bajo voltaje y sobrevoltajes. El SMART2200RMXL2U mantiene la salida nominal regulada de 120V durante caídas de voltaje y sobrevoltajes de 80V a 151V,mientras mantiene la batería totalmente cargada y lista para hacerse cargo en el caso de una falla de energía.La Protección Premium contra Ruido en la Línea por EMI/RFI le Ayuda a Su Equipo a Funcionar MejorEste sistema UPS filtra la interferencia electromagnética e interferencia de radio frecuencia que pueden perturbar su hardware o causar pérdida de datos. Este filtro de EMI y RFI también ayuda a que sus componentes conectados se desempeñen mejor y duren más.Certificado ENERGY STAR para Ayudarle a Ahorrar Dinero y Proteger el Medio AmbienteCumpliendo los estrictos requerimientos del Departamento de Energía de los EE UU y la Agencia de Protección Ambiental de los EE UU, este sistema UPS ENERGY STAR 2.0 proporciona alta eficiencia operativa para indicar una reducción en las emisiones en BTU, ahorrar en costos de energía de la red pública y enfriamiento y ayudar a proteger el medio ambiente.Interfaz Intuitiva en el Panel Frontal para Conveniente Operación y Monitoreo del UPSLa pantalla de monitoreo LCD de dos líneas del panel frontal cuenta con diez pantallas seleccionables que permiten acceso rápido a una amplia gama de información detallada de la energía del UPS y el sitio.Los LED muestran el estado del UPS: una luz verde significa que la energía de la red pública estáconectada, una luz naranja significa que el UPS está en modo de respaldo por batería y una luz roja indica una alarma o falla activa. El panel de control gira para permitir configuraciones para instalación en rack y torre.Los Puertos de Comunicaciones Avanzados Permiten el Guardado y Apagado AutomáticosLos puertos RS-232 y USB se conectan a un dispositivo para una variedad de opciones de comunicación (se incluyen los cables). Puede programarse un puerto de relevador de contacto seco mediante el LCD para proporcionar comunicaciones confiables para la automatización y componentes industriales. El puerto RPO/ROO permite el apagado de emergencia o el reinicio remoto de todos los equipos conectados.Versátiles Opciones de InstalaciónPuede instalar el SMART2200RMXL2U en solamente 2U de espacio en un rack estándar EIA de 19"usando los accesorios incluidos. Con 60 cm [23.7"] de profundidad, el UPS se instala en racks de poca profundidad y otros espacios compactos. También puede adaptarlo para instalación en torre usando los soportes para instalación en torre incluidos. El cable de alimentación de 3.05 m [10 pies] con clavija NEMA 5-20P se conecta a un tomacorriente de CA.© 2023 Eaton. All Rights Reserved. Eaton is a registered trademark. All other trademarks are the property of their respective owners.。

®Pallas-D Single Channel 44W (DALI-2)Product Feature MapBridgelux Pallas-D (DALI) Single Channel 44W Driver provides dynamic constant current output for LED modules and arrays. This Driver interoperates with DALI-2 standard lighting systems and protocols and allows for simple integration of Bridgelux’s and all major brands White Arrays and Linear modules. Please visit for more information.The part number designation for Bridgelux Pallas-D (DALI) Single Channel 44W Driver is explained as follows:Product NomenclaturePart NumberConfigurationBXDR-PS-44BS-E110D-01-ABrick with strain relief built-inTable 1:Product Selection GuideLED OutputEU input 220-240VAC4 Dip-switch (16 steps)DALI-2 DT 6 ControlCase temperature measurement point TcBXDR44BSE110D01A----Housing MaterialP = Plastic Maximum Output PowerProduct Family BXDR = Driver 44 = 44WForm FactorB = BrickConnector Type S = Strain ReliefInput Voltage E = EU 220-240VACOutput Channels 1 = Single ChannelMaximum Output Current x 100mA 10 = 1050 mAControl InputD = DALI-2 ControlProduct Version 01 = Standard Product Generation 1,2,3,47,8,9,1011,12,13,14,1516,1718A = Generation APS -5,6Current SettingS = Dip-Switch SettingTable 2:Input Electrical CharacteristicsTable 3:Output Electrical Characteristics Parameter Unit Specification Nominal voltage V 220 –240Nominal frequency Hz 50 / 60AC voltage range V 198 –264DC voltage range V 176 -276Nominal current A 0.3Power factor (Full load)-≥ 0.9THD (Full load)%≤ 10Efficiency (Full load)%≥ 88NO load W ≤ 0.5Protection class -I, IIInrush current(Coldstart)A pk < 5.6 (th = 50 μs)Max. units per circuit breaker-B10: 37 B16: 59 C10: 37 C16: 59Parameter Unit SpecificationNominal voltagerange V6-52V6-49V6-46V 6-44V 6-42VMaximumvoltage(Open Circuit)Vdc≤ 59Nominal current mA 30035040045050055060065070075080085090095010001050Current accuracy%+/-5Dimming YesDALI-2（IEC 62386-101,102,207）& Push DimDimming Range 1% -100%Current ripple LF< 3KHz %≤ 4Pst LM -≤ 1SVM -≤ 0.4Maximum power W 44Galvanic isolation:SELV-SELVFigure 1:Power Factor vs. Power Figure 2:Total Harmonic Distortion vs. PowerFigure 3:Efficiency vs. Power Figure 4:Expected Life TimeFigure 5:Operating WindowMechanical CharacteristicsCharacteristics SpecificationDimensions 170.0 mm (L) x 65.0 mm (W) x 30.0 mm (H)Enclosure MaterialsPC Plastic Weight 188 g Ingress ProtectionIP20Table 4:Product Mechanical dataPackagingParameters Specification Driver quantity 60 pcsOuter dimensions353 X 335 X 220 mmWeight12.0 kgTable 5:Packaging Box ConfigurationFigure 6:Mechanical DrawingNotes for Figure 6:1.Drawing dimensions are in millimeters2.Unless otherwise specified, all linear tolerances are +/-1.0mmDIP-switch operation instructions & operating windowTable 6:Dip-switch operation instructions & operating windowDip-switch settingU out I out 1234OFF OFF OFF OFF6-52V300 mA OFF OFF OFF ON6-52V350 mA OFF OFF ON OFF6-52V400 mA OFF OFF ON ON6-52V450 mA OFF ON OFF OFF6-52V500 mA OFF ON OFF ON6-52V550 mA OFF ON ON OFF6-52V600 mA OFF ON ON ON6-52V650 mA ON OFF OFF OFF6-52V700 mA ON OFF OFF ON6-52V750 mA ON OFF ON OFF6-52V800 mA ON OFF ON ON6-49V850 mA ON ON OFF OFF6-49V900 mA ON ON OFF ON6-46V950 mA ON ON ON OFF6-44V1,000 mA ON ON ON ON6-42V1,050 mAWiring DiagramNotes for Table 7:1.Hot plug-in or secondary switching of LEDs is not permitted and may cause a very high current to the LEDs.2.Unless otherwise specified, all linear tolerances are +/-1.0mmPRIPRICable cross-section0.75 –2.5 mm 2 / AWG 18 -13Stripping 8 -9 mmSECCable cross-section0.5 –1.5 mm 2 / AWG 20 -15Stripping8 -9 mmTable 7:WiringEnvironmental and Regulatory StandardsParameter Specification Ambient Operating Temperature-20°C to + 45°C Max. Case Temperature Tc+85°C(max)Max. Case Temperature (In fault condition)+110°CHumidity Rating Maximum 95% Relative Humidity, non condensing Storage Temperature -20°C to + 80°CExpected Lifetime 50,000 hours (Tc < 85°C) 100,000 hours (Tc < 75°C)Table 8:Environmental ConditionsTable 9:Regulatory Approvals and ComplianceSpecification Reference Standard ConditionDC or AC supplied electronic controlgear for LED modules EN 62384:2006/A1:2009electronic controlgear for use on DC or ACsupplies up to 1 000 V (alternating current at50 Hz or 60 Hz) and with an output frequencywhich can deviate from the supply frequencyConducted and Radiated EMI EN 55015:2019+A1:2020 (CISPR 15:2018)Harmonic CurrentEmissionsEN IEC 61000-3-2:2014Voltage Fluctuations &FlickerIEC 61000-3-3:2013ESD (Electrostatic Discharge)IEC 61547:2009 Section 5.2Test des.: IEC 61000-4-24 kV contact discharge,8 kV air discharge, level 3Continuous Radiated Disturbance IEC 61547:2009 Section 5.3Test des.: IEC 61000-4-33 V/m, 80 -1000 MHz, 80% modulated atdistance of 3 metersElectrical Fast Transient IEC 61547:2009 Section 5.5Test des.: IEC 61000-4-4±1 kV on AC power port for 1 minute,Surge IEC 61547 Section 5.7Test des.: IEC 61000-4-5±1 kV (differential mode)Continuous Conducted Disturbance IEC 61547:2009 Section 5.6Test des.: IEC 61000-4-63V, 0.15-80 MHz, 80% modulated, Level 2Voltage Dips IEC 61547 Section 5.8, 5.9Test des.: IEC 61000-4-1170% dip during 25 cycles @ 50Hz, 30 cycles @ 60Hz 0% dip during ½ cyclesRegulatory Standards (continued)Table 10:Safety Agency ApprovalsSpecification Reference Standard ConditionENEC / CE / UKCA EN 61347-1:2015,EN 61347-2-13:2014/A1:2017ENEC Certification pendingGlow wire test EN 61347-1:2015Passed with increased temperature at 650°CTable 11:DALI-2 DT6 StandardsSpecification Reference Standard ConditionSystem Components(Part 101)EN62386-101Control Gear (Part 102)EN62386-102LED Module (Part 207)EN62386-207ProtectionParameters Specification Over Power Protection>50WYes / Auto Resume Over Voltage Protection> 59VdcYes / Auto Resume Short Circuit Protection Yes / Auto ResumeOver-TemperatureTa > 80°CYes / Auto Resume Table 12:ProtectionDesign ResourcesApplication NotesPlease contact your Bridgelux sales representative for assistance on obtaining application support when designing with the Bridgelux Pallas-D Single Channel Driver. For a list of available resources, visit .PrecautionsCAUTION: PRODUCT HANDLINGHandle the Pallas-D Single Channel Driver with care to prevent any damage from mechanical shockIt is recommended to handle this driver in a static-free environmentDo not open or disassemble the productTo maintain product warranty, the installer is responsible for ensuring that the driver's operating conditions do not exceed the maximum conditions stated within this data sheetCAUTION: PRODUCT INSTALLATIONIncorrect installation of the Pallas-D Single Channel Driver can cause irreparable damage to the driver, connected LEDs.Pay attention when connecting the LED load and observe the correct polarity of the output terminals as specified in this data sheet and on the driver label.CAUTION: ELECTRIC SHOCKBe aware of the possibility of an electric shock hazard which can result in serious injury or death. Disconnect power before servicing or installing this device.DisclaimersMINOR PRODUCT CHANGE POLICYThe rigorous qualification testing on products offered by Bridgelux provides performance assurance. Slight cosmetic changes that do not affect form, fit, or function may occur as Bridgelux continues product optimization.About Bridgelux: Bridging Light and Life TM11At Bridgelux, we help companies, industries and people experience the power and possibility of light. Since 2002, we’ve designed LED solutions that are high performing, energy efficient, cost effective and easy to integrate. Our focus is on light’s impact on human behavior, delivering products that create better environments, experiences and returns—both experiential and financial. And our patented technology drives new platforms for commercial and industrial luminaires.For more information about the company, please visit/Bridgelux/Bridgelux/user/Bridgelux/company/bridgeluxWeChat ID: BridgeluxInChina46410 Fremont BlvdFremont, CA 94538 USATel (925) 583-8400© 2022 Bridgelux, Inc. All rights reserved 2022. Product specifications are subject to change without notice. Bridgelux, the Bridgelux stylized logo design and Pallas-D are registered trademarks of Bridgelux, Inc. Bridging Light and Life is a trademark of Bridgelux, Inc. All other trademarks are the property of their respective owners.Bridgelux Pallas-D (DALI) Single Channel 44W Driver Product Data Sheet DS1210 Rev. A (03/2023)。

索引数字16384色 ..........................................................8-39 16级 ................................................................8-39 256色 ..............................................................8-39 2维码阅读器 .........................................16-4, 16-11 3速闪烁 ...........................................................8-39 4096色 ............................................................8-39 65536色 ..........................................................8-39 AAPI通讯 .......................................................37-159 AUX输出 .......................................................10-50安全 .............................................................28-134安全级别列表 .................................................21-23安全设置 ........................................................21-19按键 ...............................................................15-27 BBMP/JPEG，粘贴 ............................................8-76包注册 ............................................................8-104本地窗口 .................................................12-4, 12-7保持/非保持区的数量 ...................................28-16保持传输 ........................................................28-83保持区 ............................................................28-16保存CSV格式 ................................................19-55报警历史 .................................................19-55保存到存储设备的注意事项 .........................23-143保存至CF卡 ......................................................19-59 CF卡，注意 ...........................................19-61 CF卡或USB存储器 ...............................19-58 USB存储器，注意 ..................................19-61保存至CF卡 ..................................................11-18保护对象 ..........................................................8-38报警 .................................................................19-1位监控 .....................................................19-22文本 ......................................................19-159显示，脚本 .............................................20-17备份历史 .................................................19-76部件 ......................................................19-103打印历史 ...............................................19-155冻结模式 ...............................................19-132功能列表 ...............................................19-160历史 .............................................19-21, 19-31历史数据的存储空间要求 ........................19-80列表视图 .................................................19-15设置 ........................................................19-70摘要 ...........................................19-79, 19-136直接选择 ...............................................19-118字监控 .....................................................19-26组 ............................................................19-79报警文件位置 ........................................................19-60名称 ........................................................19-60报警消息显示位置 ..........................................19-10报警历史数据 .................................................24-31报警语言，切换 ..............................................17-66背光灯颜色切换设置 ......................................5-175备份 ................................................................5-165备份SRAM ....................................................19-80备份SRAM容量 ..............................................5-93备份数据，创建 ..............................................32-37比较，条件 ...................................................20-140比较存储器 .....................................................20-75比较工程 ........................................................32-25笔记录 ............................................................18-47编号，自动 ...................................................24-105变量 ................................................................28-13变量格式 ........................................................28-19标记限制 ........................................................8-104标记，显示图像 ................................................8-82标记注册 .............................................8-101, 8-102标签 ................................................................28-62标签，查找和更换 ............................................5-73标准字体 ............................................................6-3播放列表创建文件 .................................................26-26使用 ........................................................26-26步数 ..................................................................28-5部件，编辑 .......................................................8-49部件，查找和替换地址 .....................................5-73部件工具箱 .......................................................5-86部件名称，逻辑画面 ........................................28-5 CCF卡 .............................................................5-189保存注意事项 .............................5-187, 23-143初始化 ..........................................32-37, 32-42传输工程文件 ..........................................32-36复制到 .....................................................32-29目标文件夹 ................................................5-94设置文件夹 ................................................5-45使用注意事项 ......5-187, 11-27, 19-61, 23-144 CF卡文件操作 .............................................20-102 CF卡，保存至控制字地址 ..............................................19-59注意事项 .................................................19-61 CF卡，操作注意事项 ..................................24-116 CF卡工具 ......................................................32-28 CSV文件，读取 ..........................................20-118 CSV格式 .......................................................24-31 CSV数据显示 .................................24-31, 24-37, 24-81编辑 ........................................................24-41传输 .................................24-57, 24-62, 24-89打印 ........................................................24-42流 ..............................................................24-4采样CSV格式 ................................................23-20概述 ..........................................................23-2将数据保存至CF卡 ................................23-20结构 ......................................................23-108如果不能进行数据采样时 ......................23-126数据 ........................................................23-14数据显示器 ...........................................23-122数据，时间 ...........................................23-113数据存储方法 ........................................23-119数据的显示格式 ......................................23-30数据使用容量 ........................................23-110组列表 .....................................................23-37采样设置 ........................................................18-11采样数据 ........................................................24-31采样数据显示器 ...........................................23-102操作时间表 .......................................................22-1操作数 .......................................5-170, 28-5, 28-65操作数设置 .....................................................28-65插入逻辑指令 .................................................28-50查找 ...............................................................5-119查找和更换 .......................................................5-73重叠图片 ...................................................9-8, 9-11初始化存储器 ......................................20-88, 20-89触发操作 .........................................................A-57触发条件 ........................................................20-43触摸，两次 .....................................................10-28处理中 ............................................................14-74传输配方 .............................................24-47, 24-53传输工具 ........................................................32-56安装 ........................................................32-68安装要求 .....................................................3-5传输工程文件 ...................................................32-6传输设置 ........................................................32-59串口操作 ........................................................20-92串口端口操作 .................................................20-57窗口显示 ..........................................................12-7创建 ..........................................................12-4切换 ........................................................12-11在一个画面上显示多个 ...........................12-30窗口边框 ......................................................37-160窗口部件 ........................................................12-21窗口画面 ......................................................19-149从CF卡到U盘 ..............................................A-83从U盘到CF卡 ..............................................A-83从多个GP的执行外部操作 ..........................19-157从模板中选择画面 ............................................8-72从其他工程复制 .............................................5-104从外部存储器上下载 ......................................32-36存储器循环 ........................................................20-82操作 ........................................................20-73存储器限制 ...................................................28-123存储设备上的可用空间 ...................................11-26错误检查 .............................................5-106, 5-173 DDirect Access法 ......................7-7, 7-8, 11-25, A-4Direct Access法 + Memory Link法 ............7-8, 7-9 Direct Access和Memory Link一起使用 ........A-39 DRAM ..........................................................23-110 D脚本 ..............................................................20-2 D脚本编程 .......................................................20-2打印布局 ..........................................................33-8当前画面 .................................................33-20工程设置 .................................................33-40简介 ..........................................................33-4批打印 .....................................................19-73取消 ........................................................33-30实时打印 .................................................19-73打印格式 ........................................................19-74打印功能 ........................................................33-12打印机连接 ........................................................33-12配置 .............................................33-14, 33-18打印机操作 ...................................................20-126打印机类型 .....................................................33-11单色16级 .........................................................8-39 LCD ..........................................................8-39地址转换多个 ...................................................5-40地址操作 ........................................................24-94地址格式 ........................................................28-31地址监控 ......................................................28-104地址块显示 .....................................................18-24地址块转换 .....................................................5-100地址列表显示 ..........................................................5-32确认 ..........................................................5-31地址设置 ........................................................5-110地址刷新 ......................................................28-131地址转换图案，更改设备类型 ..........................7-21调用函数 ........................................................20-55调用和显示图片 ...............................9-4, 9-10, 9-15调用画面 .................................................8-62, 8-63读取文件 ......................................................20-121读取区，内部寄存器 ......................................18-72对象编辑 ..........................................................8-26对齐 ..........................................................8-34翻转 ..........................................................8-36放大/缩小 ................................................8-28复制 ..........................................................8-29取消组合 ...................................................8-32移动 ..........................................................8-28组合 ..........................................................8-32旋转 ..........................................................8-35对齐行 .....................................17-62, 17-63, 17-65居中 .............................................17-63, 17-64固定位置 .................................................17-62对齐到网格 .......................................................8-99多功能 .................................................10-36, 10-75多语言 .................................................17-15, 17-24FFTP服务器 ....................................................5-189发送数据 ........................................................32-66反映在控制器/PLC中 ....................................11-16放置包中注册的图片 ........................................8-65分辨率，转换 ......................................5-104, 5-128分层画面切换 .................................................11-21分支 ...............................................................28-48分支，插入 .....................................................28-41蜂鸣器 ..............................10-50, 25-1, 25-7, 25-10符号 ......................................................5-51, 28-13符号变量 ...............................5-177, 28-13, 28-123符号变量，导入/导出 ...................................28-27复制存储器 ..........................................20-78, 20-81复制工具 ......................................................37-169富文本文件 .......................................................33-4 GGP-Pro EX .........................................................1-2 GP-PRO/PBIII for Windows ...............................2-2 GP到PC接收工程文件 .................................32-9, 32-18 GP开机时的默认画面显示，选择 ....................11-7工具栏，自定义 ...............................................28-6工程文件备份 ..........................................................5-23创建 ............................................................5-9设置 ............................................................5-9工程信息查看 ..........................................................5-43工程转换器 .......................................................2-12工作区 ............................................................5-108固定别针 ...............................................5-117, 8-38观察列表 ......................................................28-157光标形状 ......................................................19-134归档 .................................................................33-4滚动报警显示 .................................................19-79滚动报警消息 ...................................................19-8 HHMI系统变量(#H系统变量) ........................A-109行，插入 ........................................................28-41函数名 ............................................................20-61互锁 ...............................................................10-19互锁触摸操作控制 ..........................................14-24互锁设置 ........................................................21-24画面保存显示的画面 ......................................11-18复制 ..........................................................5-69画面显示正在关闭 ...................................34-7, 34-9画面，切换 .....................11-4, 11-10, 11-13, 11-21画面捕捉 .................................5-190, 11-18, 11-26画面捕捉，JPEG文件 ..................................11-18画面各部分的名称 ............................................5-84画面列表 ........................................................5-115画面信息 ........................................................5-180画面属性更改 ...................................................5-67画面数据列表窗口 ..........................................5-118画面颜色，更改 ................................................5-66绘图 ....................................................................8-1绘制矩形 ..........................................................8-10按像素 .........................................................8-7标尺 ..........................................................8-18表格 ..........................................................8-20多边形 .......................................................8-16弧/饼形 ....................................................8-14圆/椭圆 ....................................................8-12直线/折线 ..................................................8-8 IIPC设置 .......................................................37-152 JJPEG文件，画面捕捉 ...................................11-18基本操作 ............................................................5-1监控步 ............................................................5-171兼容性 ................................................................2-2键盘系统 ........................................................15-20弹出式 ............................................15-3, 15-37设置 .................................................15-3, 15-6用户 ........................................................15-22用户创建的 ................................................15-9注册 ........................................................15-23交叉参考 ...............................................5-32, 5-103脚本 ................................................................5-166编程 ........................................................20-55创建 ........................................................20-23创建全局 .................................................20-39错误代码列表 ..........................................20-63打印自 .....................................................20-21函数摘要 .................................................20-27扩展，结构 ..............................................20-22全局D脚本 .............................................20-50运算 ..........................................................20-5主函数 .....................................................20-27脚本设置 ........................................................5-163接收数据 ........................................................32-67 KKanji转换 ............................................15-28, 15-40开关 ..................................................................10-1位 ............................................................10-45选择 ........................................................10-72标签 ........................................................10-55单选 ........................................................10-38切换画面 .................................................10-62特殊 ........................................................10-63颜色更改 .................................................10-31字 ............................................................10-59开关指示灯 .....................................................10-42开始操作的工作流程 ...................................4-2, 4-3可用地址 ....................................................A-4, A-7控制器/PLC ...................................................5-160控制器/PLC系列的设置 ..................................5-89控制器/PLC系统数据区分配 ..........................A-23控制器/PLC，更改 .................................7-16, 7-26控制字地址，保存至CF卡 ............................19-59 LLS区 .................................................................A-8蓝色LCD .........................................................8-39历史数据 ........................................................18-15连接多台PLC ....................................................7-7两次触摸 ........................................................10-28逻辑系统变量（#L系统变量） .......................A-90逻辑程序，纠正错误 ......................................28-85逻辑程序数量限制 ........................................28-123逻辑存储器 ...................................................28-121逻辑存储器的验证方法 .................................28-121逻辑监控 ......................................................28-101逻辑监控，启动和停止 ...................................28-99逻辑图监控 ......................................................A-45逻辑运算示例 ...............................................20-162逻辑指令 ......................................................28-114逻辑指令图标列表 ............................................28-8 MMemory Link法 ......................................11-25, A-6 Memory Loader ..................................32-36, 32-63脉冲 ...............................................................28-70每画面的功能数 .............................................5-184每画面的数据容量 ..........................................5-184密码......................5-27, 5-95, 5-96, 28-134, 32-31编辑 ..........................................................5-28删除/更改 ..............................................32-34命令和状态 .....................................................19-59模板注册 ........................................................5-182 N内部寄存器到数据缓冲器 .............................20-151内部设备地址 .............................................A-5, A-7 PPC到GP发送工程文件 .................................32-6, 32-13使用调制解调器传输画面数据 .................32-48 PC工程模拟 ....................................................31-1 PC上的工程模拟 .............................................31-1 PID监控 .......................................................28-153 PLC与多台控制器通讯 .......................................7-1配方CSV格式 ................................................24-10 CSV数据 .........................24-10, 24-18, 24-26保存至CF卡 ..........................................24-11传输 .................................24-47, 24-53, 24-68传输CSV数据 ..........................................24-3传输配方数据 ............................................24-3概述 ..........................................................24-2配方数据 .................................................24-43设置 ........................................................24-57数据 ........................................................24-31数据，传输 ..............................................24-64配方数据传输 ...............................24-47, 24-53, 24-107流 ..............................................................24-5容量 ......................................................24-108偏移地址计算示例 ........................................20-165屏幕保护程序 ..........................................34-1, 34-7 Q启用系统区 ..........11-12, 11-17, 12-20, 25-9, 25-12切换显示 ........................................................12-17切换画面 .............................................11-10, 11-13切换基本画面 .................................................19-36切换视图 ........................................................5-181强制画面切换 ...............................A-12, A-14, A-29清除区 .................................................15-26, 15-39全局窗口 ...............................................12-4, 12-14全局互锁 .............................................21-10, 21-25 R日期/时间显示 ..............................................14-92日语FEP ........................................................15-40软件包内容 .........................................................3-2 SSRAM ............................................................19-80 SRAM，注意事项 ..........................................5-190 SRAM备份 ..................................................23-109 SRAM备份，关于 .......................................24-108 STN伪彩LCD .................................................8-39扫描时间 ...........................28-124, 28-127, 28-158删除文件 ......................................................20-125上传到外部存储器 ...............................32-36, 32-42闪烁，设置 .......................................................8-46设备访问API .....................................37-88, 37-168设备监控 .........................................................A-43设备支持的功能列表 ..........................................1-5声音选项 ........................................................10-50时间，调节 ..............................................34-1, 34-3时间表 ...................................................22-1, 22-10实时视频 ..........................................................26-8矢量字体 ............................................................6-3使用逻辑 ..........................................................28-3使用其他语言绘制 ...........................................A-72事件记录器 ..........................................26-22, 26-86视频 ..................................................................26-1故障前后 .................................................26-20录制 ..........................................................26-1视频控制区，使用示例 .................................26-133首选设置 ........................................................5-165输出文件列表 ...............................................20-123输入启用 .................................14-52, 14-55, 14-82顺序 ........................................................14-31许可 ........................................................14-85输入代码表 .......................................................8-93输入设备设置 .................................................16-24输入顺序功能 ...............................................14-105属性 ...............................................................5-117属性，更改 .......................................................8-31数据显示 ..........................................................14-1保存模式 ...............................................20-110比较 ........................................................10-16写 ............................................................10-10范围，防止输入超出允许范围的数据 ......14-28更改值 .....................................................14-34缓冲器到内部寄存器 .............................20-153加 ............................................................10-13减 ............................................................10-13输入 ..........................................................14-1数据显示器 .....................................................14-38数据采样 ..........................................................23-1数据块显示显示/清除图表 .......................................18-27数据块显示图结构 ..........................................18-71数据块，复制 .................................................20-12数字显示 ........................................................14-40搜索存储器 .....................................................20-84缩放框 ..............................................................5-86索引文件 ......................................................24-100 TTFT真彩LCD ..................................................8-39 Time-Base .....................................................14-65特殊继电器 .............................................A-20, A-35特殊数据显示器 .............................................24-72替换 .................................................................5-73条形码阅读器 ................................16-2, 16-4, 16-5条件表达式 ...................................................20-136分支计算示例 ........................................20-164条件表达式 .....................................................20-45条件操作 ........................................................24-91条件名称查找功能 ..........................................24-99调色板 ..............................................................8-42调试 .................................................................33-4调试函数 ......................................................20-131停止通讯 ..........................................................7-11通讯错误代码 ..................................................A-22概述 ...........................................................A-2周期时间 ..................................................A-22通讯状态，确认 ...............................................7-13通过USB电缆传输 ..........................................32-5通过以太网(LAN)传输 ..................................32-12通用设置 .............................................5-112, 5-174统计数据显示器 .............................................14-95透明部件 .................................10-43, 14-39, 18-29图形 ...................................................................8-6图像字体 ..........................................................6-14图案，设置 .......................................................8-48图表部件设置 .................................................18-29历史趋势 .................................................18-45普通 ........................................................18-30数据块显示 ..............................................18-67统计 ........................................................18-39仪表 ........................................................18-41图片显示器 ..........................................9-22, 19-147图片注册 ..........................................................9-20退出WinGP ...................................................37-26 UUltra VNC服务器，RPA .................................35-7 USB存储器 .........................................5-188, 5-189保存注意事项 ........................................23-143 USB存储器，保存至注意事项 .................................................19-61 USB存储器操作说明 ...................................23-144 V 2003 程序 .........................................37-57 VNC服务器，RPA ..........................................35-7 WWindows XP Embedded ................................37-11 WinGP .............................................................37-2 API ..........................................................37-34 SDK ........................................................37-13 2003程序示例 ............................37-39 VB6程序示例 .........................................37-65读取VB中的文本 .................................37-119读取或写入数据 ......................................37-38禁止两次调用API .................................37-118启动 ........................................................37-26软件使用授权密钥码 .................................37-2运行应用 .................................................37-71专用API ..................................................37-56 WinGP，退出 ...............................................20-135外围控制器列表 ..............................................5-157网格，设置 .......................................................8-69位逻辑系统变量 ...............................................A-90位运算示例 ...................................................20-163位置点，显示 ...................................................9-48位状态16 ............................................................13-135 ................................................................13-8文本显示区 ..............................17-62, 17-63, 17-64表设置 .....................................................17-51操作 ......................................................20-146运算错误状态 ........................................20-154注册 ........................................................17-49文本显示器 .....................................................14-77文本报警 ......................................................19-140文本列表 ......................17-15, 17-24, 17-31, 17-36文本设置 ..........................................................8-94文本数据模式 .................................................5-161文件管理器简介 ........................................................24-86文件名，更改 ...............................................20-116。

MGate5111系列1埠Modbus/PROFINET/EtherNet/IP轉PROFIBUS從屬裝置閘道器特色與優點•將Modbus、PROFINET或EtherNet/IP轉換為PROFIBUS•支援PROFIBUS DP V0從屬裝置•支援Modbus RTU/ASCII/TCP主控裝置/用戶端和從屬裝置/伺服器•支援EtherNet/IP轉接頭•支援PROFINET IO裝置•透過網頁式設定精靈輕鬆配置•輕鬆佈線的內建乙太網路串接•嵌入式流量監控/診斷資訊，便於故障排除•狀態監控和故障保護，可輕鬆維護•microSD卡可用於備份/複製配置與儲存事件日誌•支援冗餘DC電源輸入與1點繼電器輸出•串列內建埠2kV隔離保護•提供-40至75°C寬溫度操作型號可供選用•基於IEC62443的資安防護功能認證簡介MGate5111工業乙太網路閘道器能夠將數據從Modbus RTU/ASCII/TCP、EtherNet/IP或PROFINET轉換為PROFIBUS通訊協定。

所有型號均有強固的金屬外殼加以保護，可使用DIN軌道安裝，而且提供內建串列隔離。

Modbus是最普遍使用的工業通訊協定之一，EtherNet/IP、PROFINET和PROFIBUS普遍用於工廠自動化和製程自動化。

MGate5111支援Modbus RTU/ASCII/TCP主控裝置和從屬裝置模式，因此很容易就能將Modbus裝置連接到PROFIBUS PLC或DCS（例如Siemens PLC）。

對於系統整合，MGate5111可連接到EtherNet/IP PLC/SCADA系統（例如Rockwell Automation PLC）、連接到PROFIBUS PLC/DCS系統，或在對於現有PROFIBUS系統支援PROFINET的新型Siemens PLC系統之間連接。

MGate5111閘道器有助於輕鬆配置和快速維護。

Products Solutions Services操作手册Proline Promag W 300电磁流量计HARTBA01918D/28/ZH/04.22-00715883742022-08-01自下列版本起生效01.06.zz (设备固件)Proline Promag W 300 HART•请将文档妥善保存在安全地方，便于操作或使用设备时查看。

•为了避免出现人员或装置危险，请仔细阅读“基本安全指南”章节，以及针对特定操作步骤的文档中的所有其他安全指南。

•制造商保留修改技术参数的权利，将不预先通知。

Endress+Hauser当地销售中心将为您提供最新文档信息和更新文档资料。

2Endress+HauserProline Promag W 300 HART 目录Endress+Hauser 3目录1文档信息 (6)1.1文档功能.............................61.2图标................................61.2.1安全图标......................61.2.2电气图标......................61.2.3通信图标......................61.2.4工具图标......................71.2.5特定信息图标...................71.2.6图中的图标.....................71.3文档资料代号.........................81.3.1文档功能......................81.4注册商标.............................82安全指南 (9)2.1人员要求.............................92.2指定用途.............................92.3工作场所安全........................102.4操作安全............................102.5产品安全............................102.6IT 安全.............................102.7设备的IT 安全.......................102.7.1通过硬件写保护实现访问保护......112.7.2访问密码.....................112.7.3通过网页服务器访问.............122.7.4通过OPC-UA 访问..............122.7.5通过服务接口（CDI-RJ45）访问. (12)3产品描述 (13)3.1产品设计 (13)4到货验收和产品标识 (14)4.1到货验收............................144.2产品标识............................144.2.1变送器铭牌....................154.2.2传感器铭牌....................164.2.3测量设备上的图标..............165储存和运输 (17)5.1储存条件............................175.2运输产品............................175.2.1不带起吊吊环的测量仪表.........175.2.2带起吊吊环的测量设备...........185.2.3使用叉车搬运..................185.3包装处置............................186安装 (18)6.1安装要求............................186.1.1安装位置.....................186.1.2环境条件和过程条件要求.........246.1.3特殊安装指南..................266.2安装测量设备........................266.2.1所需工具.....................266.2.2准备测量设备..................266.2.3安装传感器....................266.2.4旋转变送器外壳................336.2.5旋转显示单元..................346.3安装后检查 (35)7电气连接 (36)7.1电气安全............................367.2接线要求............................367.2.1所需工具.....................367.2.2连接电缆要求..................367.2.3接线端子分配..................387.2.4准备测量设备..................387.3连接测量设备........................387.3.1连接变送器....................387.3.2连接远传显示单元DKX001........417.4确保电势平衡........................417.4.1概述.........................417.4.2连接实例：标准应用场合.........417.4.3连接实例：介质与保护性接地端存在电位差（不选择“悬浮测量”选项）.........................437.4.4连接实例，介质与保护性接地端存在电位差（选择“悬浮测量”的流量计）.........................437.5特殊接线指南........................457.5.1接线实例.....................457.6确保防护等级........................497.7连接后检查..........................498操作方式 (50)8.1操作方式概述........................508.2操作菜单的结构和功能.................518.2.1操作菜单的结构................518.2.2操作方式.....................528.3通过现场显示单元访问操作菜单..........538.3.1操作界面.....................538.3.2菜单视图.....................548.3.3编辑界面.....................568.3.4操作单元.....................588.3.5打开文本菜单..................588.3.6在列表中移动和选择.............608.3.7直接查看参数..................608.3.8查询帮助文本..................618.3.9更改参数.....................618.3.10用户角色及访问权限.............628.3.11通过访问密码关闭写保护.........628.3.12打开和关闭键盘锁..............628.4通过网页浏览器访问操作菜单............638.4.1功能范围.....................638.4.2要求.........................638.4.3建立连接.....................658.4.4登录.........................668.4.5用户界面.....................67目录Proline Promag W 300 HART4Endress+Hauser8.4.6关闭网页服务器................688.4.7退出.........................688.5通过调试软件访问操作菜单..............698.5.1连接调试软件..................698.5.2Field Xpert SFX350、SFX370......728.5.3FieldCare .....................728.5.4DeviceCare ....................738.5.5AMS 设备管理机...............748.5.6SIMATIC PDM .................748.5.7475手操器.. (74)9系统集成 (75)9.1设备描述文件概述.....................759.1.1当前设备版本信息..............759.1.2调试软件.....................759.2HART 通信传输的测量变量..............759.3其他设置............................7610调试 (79)10.1功能检查............................7910.2启动测量设备........................7910.3设置显示语言........................7910.4设置测量设备........................7910.4.1设置设备位号..................8110.4.2设置系统单位..................8110.4.3显示输入/输出设置..............8210.4.4设置状态输入..................8310.4.5设置电流输入..................8410.4.6设置电流输出..................8510.4.7设置脉冲/频率/开关量输出.......8810.4.8设置现场显示单元..............9310.4.9设置小流量切除................9510.4.10设置空管检测..................9710.4.11设置HART 输入................9710.4.12设置继电器输出................9910.4.13设置双脉冲输出...............10110.4.14设置流量阻尼时间.............10210.5高级设置 (104)10.5.1在此参数中输入访问密码。

Grandstream IP Phone Configuration GuidesVersion 1.0Yeastar Information Technology Co. Ltd.Table of ContentsFOR GRANDSTREAM GXP SERIES (3)Register with MyPBX (3)Provisioning for MyPBX (5)Phone provisioning via PnP mode (6)Phone provisioning via DHCP mode (8)FOR GRANDSTREAM HANDYTONE 386 (10)How to setup ATA for MyPBX (10)FOR GRANDSTREAM HANDYTONE 486(487), 286(287), ATA (13)How to setup ATA for MyPBX: (14)For Grandstream GXP seriesImportantThis guide has been tested for Grandstream phones models GXP280, GXP285, GXP1100, GXP1105, GXP1200, GXP1400, GXP1405, GXP1450, GXP2000, GXP2100, GXP2110, GXP2120, GXP2124, DP710, DP715 with firmware version 1.2.4.3. Be aware that different firmware revisions may have different web interface formats and functionality.The easiest way to set up a Grandstream phone for use with MyPBX is to use the built-in plug and play provisioning functionality inside MyPBX. This will allow the phone to configure itself by retrieving a generated phone configuration file. Alternatively you can configure using DHCP and option. You also can configure manually. For more information, see this configuration guide. Register with MyPBXConfiguring the Phone to Register with MyPBX1.Start up the phone and identify its IP Address from the LCD display. For thisexample we will assume the IP Address of the phone is 192.168.5.126, and the IP Address of MyPBX is 192.168.5.1502.Point your browser to the web interface of the phone: http://192.168.5.126.The default password is ‘admin’.3.We now need to set the phone to register with MyPBX. Go to the ‘Account 1’page:Figure 1-11)Set the ‘Account Active’ field to ‘yes’2)Set the ‘Account Name’ field to a name (for informational purposesonly)3)Set the ‘SIP Server’ field to the IP Address of MyPBX4)Set the ‘SIP User ID’ field to the extension number you want toassociate with this phone5)Set the ‘Authenticate ID’ field to the extension's number6)Set the ‘Authenticate Password’ field to the extension's Password7)Set the ‘Name’ field to the name you would like to be displayed on otherphones when calling out8)Set the ‘User ID is phone number’ field to ‘yes’9)Set the ‘Auth Answer’ field to ‘no’ and the ‘Allow Auth Answer byCall-Info’ field to ‘yes’ (to allow paging functionality)Figure 1-210)Click the ‘Update’ button at the bottom of the page, and then click the‘Reboot’ button. Your phone will restart. After rebooting, the phone will retrieve its configuration files and register with MyPBX. This can be verified via the ‘Extension Status’ page of MyPBX Management Console.Provisioning for MyPBX1.Verify Firmware Installed on your PhoneVerify the firmware version currently installed on the “Status” page of IP Phone. Go to Grandstream Support Website to download the latest firmware for your phone.2.Plug phone into the networkPlug your Grandstream phone into your LAN. (The Phone must be on the same LAN as that of MyPBX IP PBX).3.Approve phone and Assign an ExtensionTo do provisioning with Grandstream IP phones, you need to set MyPBX working as the only DHCP server any more.Phone provisioning via PnP modeNote: Grandstream GXP 2100 comes with PnP mode which is on by default. In this case, we test the firm version 1.0.4.9 of GXP 2100 IP phone.Step1. Check MAC address of your Grandstream IP phone on “Status” page.Figure 1-3Step2. Reboot IP phone.Step3. Search MAC address you would like configure in “phone provisioning” ” Not Configured Phone” pageFigure 1-4Step4.In this case, the MAC address of Grandstream IP phone is 000B822B1CD0, Click it to configure.Figure 1-5Step5. Fill in the phone detail message on the pop-up windows.Input Name, Call waiting, Line, Extension, Memory Key Settings and so on for the phone.Figure 1-6Click “Save” and “Apply Changes”, then reboot IP phone manually.Note:The IP phone will reboot twice to apply the configuration take effect. When done, you can find the account 509 is registered in MyPBX and GrandStream IP Phone.Phone provisioning via DHCP modeStep1. Disable DHCP Server on your local network.E.g. Disable DHCP Server on Linksys Router.Figure 1-7Step2. Enable DHCP Server on MyPBX.Login MyPBX web interface, System Settings → DHCP Server → Enable DHCP Server.Figure 1-8Step3. Configure phones on MyPBX Auto-Provision page.1. Login MyPBX web interface, Basic → Phone Provisioning → Add Phone.Figure 1-92. Fill in the phone detail message on the pop-up windows.Input IP Phone’s MAC address, Name, Manufacturer, Call waiting, Line, Extension and so on for the phone.Figure 1-103. Click “Save” and “Apply Changes”, then reboot IP phone manually.Note:The IP phone will reboot twice to apply the configuration take effect. When done, you can find the account 506 is registered in MyPBX and GrandStream IP Phone.Remark: The factory default setting of DHCP for IP Phone is “enable”, so you can skip this step to step 5.If the DHCP is disabled, please follow below step to enable it. (e.g.: Grandstream GXP2100 IP Phone).1. Login IP phone’s web page. Go to “Settings BASIC SETTINGS” page.2. Enable DHCP.Figure 1-11Step4: DoneFor GrandStream Handytone 386How to setup ATA for MyPBXFollow these steps to set up a GrandStream HandyTone 386 VoIP ATA withMyPBX:1.Connect the device’s LAN port to your computer with a straight networkcable.2.The device is preconfigured with IP Address 192.168.5.126. Configure yourcomputer to have static IP Address 192.168.5.126, with subnet mask 255.255.255.0.unch a browser and go to http://192.168.5.126. The default username is‘Admin’.4.Select the ‘Basic settings’ tab.Figure 2-15.If your network has a DHCP Server, then select the radio button labeled‘dynamically assigned via DHCP’.6.If your network does NOT have a DHCP Server, then set up static IPAddressing. From this point onwards, we will assume that the IP Address of MyPBX Server on the network is 192.168.5.150, the IP Address of the device will be 192.168.5.150, the IP Address of the default gateway is 192.168.5.1, and the IP Address of the DNS Server for the subnet is10.25.0.168.7.Scroll to the bottom of the page and click the ‘Update’ button. You will beprompted to reboot the device. Click the ‘Reboot’ button. After the device has finished rebooting, you may consult the DHCP Server’s administrative tools to retrieve the device’s new IP Address.8.Now that you have access to the web configuration you can start configuringit against MyPBX. Launch a browser and point it to device’s new IP Address.9.Ensure that you have already created the extension in MyPBX. Take note ofthe Authentication ID field and the Authentication password that you have entered for the extension connected to the ATA device.10.Go to ‘FXS PORT 1’ tab.Figure 2-211.Set the ‘SIP Server’ field to the IP Address of the server on which MyPBX isinstalled – in this example 192.168.5.150.12.Set the ‘Outbound Proxy’ field to the same value as in step 11.13.The ‘SIP User ID’ field should match the ‘Extension Number’ field of theextension in MyPBX Management Console.14.The ‘Authenticate ID’ and ‘Authenticate Password’ fields must match theAuthentication ID and Password set for that extension in MyPBX Management Console.15.The ‘Name’ field is optional. A suitable value would be the name of the userusing this phone.16.Set ‘User ID is phone number’ to ‘Yes’17.Set ‘Sip Registration’ to ‘Yes’18.Set ‘Unregister on Reboot’ to ‘Yes’19.Set the ‘Register Expiration’ field to a suitable value. For testing purposesyou may want to use 60 seconds, but once the configuration is tested a larger value would be more appropriate to limit unnecessary network traffic.A good setting for general use could be 3600 seconds (1 hour).20.Set ‘Enable Call Features’ to ‘Yes’. This setting enables feature like transfer,on hold etc from the analog phone connected to the FXS port of the device.21.Set the ‘Preferred Vocoder’ to choice 1: PCMU, choice 2: PCMA. The settingsfor choices 3 to 6 will not come in use since they will not be used by MyPBX.22.Set ‘Allow outgoing call without Registration’ to ‘yes’.23.Scroll to the bottom of the page and click the ‘Update’ button. You will beprompted to reboot the device. Click the ‘Reboot’ button.24.Repeat steps 11-24 for the configuring ‘FXS port 2’.25.After the HandyTone has restarted, switch to MyPBX Management Console,and click on ‘Line Status’, your new extension connected to the PBX should be listed with a blue status light.For GrandStream HandyTone 486(487), 286(287), ATAConfiguring GrandStream HandyTone 486(487), 286(287), ATA for MyPBXImportantThis guide has been tested with firmware version 1.1.0.37. Be aware thatdifferent firmware revisions may have different web interface formats and functionality. This is based on a new ATA OR one that has been reset to factory defaults.How to setup ATA for MyPBX:Connect the LAN to the WAN port of the HandyTone1.Connect an analog phone to the HandyTone phone port. Pick up the headsetand press ‘****’. This will start up a Voice Prompt Menu. Now press ‘02’ to listen to the IP address that was assigned to the device by the DHCP server2.Enable the wan side Web access, dial ‘****’ and then ‘129’unch a browser and go to the IP Address, The default username is ‘admin’,Select the ‘Advanced Settings 1’ tab.Figure 3-14.Set the ‘SIP Server’ field to the IP Address of the server on which MyPBX isinstalled – in this example 192.168.5.1505.Set the ‘Outbound Proxy’ field to the same value as sip server6.The ‘SIP User ID’ field should match the ‘Extension Number’ field of theextension created for this phone in MyPBX Management Console7.In the ‘Authenticate ID’ and ‘Authenticate Password’ fields must match the‘extension’ and ‘Password’ set for that extension in MyPBX Management Console8.The ‘Name’ field is optional. A suitable value would be the name of the userusing this phone9.Set the ‘Preferred Vocoder’ to choice 1: PCMU, choice 2: PCMA. The settingsfor choices 3 to 7 will not come in use since they will not be used by MyPBX10.Set ‘payload type’ to 101 for successful registration11.Set ‘User ID is phone number’ to ‘Yes’12.Set ‘Sip Registration’ to ‘Yes’13.Set ‘Unregister on Reboot’ to ‘Yes’14.Set the ‘Register Expiration’ field to a suitable value. For testing purposesyou may want to use 60 seconds, but once configuration is tested a larger value would be more appropriate to limit unnecessary network traffic. A good setting for general use could be 3600 seconds (1 hour)15.Set ‘Allow outgoing call without Registration’ to yes16.Set ‘Enable Call Features’ to ‘Yes’. This setting enables features like transfer,on hold etc from the analog phone connected to the FXS port of the device 17.Scroll to the bottom of the page and click the ‘Update’ button. You will beprompted to reboot the device. Click the ‘Reboot’ buttonFigure 3-218.After the HandyTone has restarted, switch to MyPBX Management Console,and click on ’Line Status’. In the section ‘Extensions’, your new extension connected to the PBX should be listed with a blue status light<Finish>。