英文商业合同模板
Commercial Contract
商业合同
No：
合同号：
Date ：
日期：
The Buyer ：Zhonghua International Technology Corporation
卖方：菲尔德·埃米森公司
The Seller ：Field Emission Corp.
买方：中华国际技术开发公司
This contract is made by and between the Buyer and the
Seller ，whereby the Buyer agrees to buy and the Seller
agrees to sell the under-mentioned commodity according to the
terms and conditions stated below ：
根据本合同条款，买方同意购买，卖方同意出售下述货品，兹签订本合同。
1. Commodity ：camera-control equipment
1 、品名：摄像机控制设备
Quantity ：60 （sets ）
数量：6 0（台）
Unit price ：USD4 800.00
单价：4 800 美元/ 台
Total amount ：USD288 000.00
总额：288 000 美元
2. Country of origin and manufacturer ：Field Emission Corp.
in US
2 、原产国别及生产商：美国菲尔德·埃米森公司
3. Packing
3 、包装
To be packed in strong wooden cases or cartons ，suitable
for long distance ocean ，parcel post or air freight
transportation as well as changing climate and with good
resistance to moisture and shocks.
用坚固的木箱或纸箱包装，适宜长途海运、邮寄或空运及适合气候变化，并且具备良好的防潮抗震水平。
The Seller shall be liable for any damage of the commodity
due to improper packing and for any rust attributable to
inadequate protective measures in regard to the packing.
因为包装不当而引起的货物损坏或因为防护措施不善而引起货物锈蚀，卖方应赔偿由此而造成的全部损失费用。
One full set of service and operation manual shall be
enclosed in each case.
包装箱内应附有完整的维修保养、操作使用说明书。
4. Shipping mark ：
4 、运输标志
The Seller shall mark on each package with fadeless paint
the package number ，gross weight ，net weight ，measurement
and warnings such as “HANDLE WITH CAR”E，“KEEP AWAY FROM HEAT”，“KEEP AWAY FROM MOIST”U R a E s well as shipping mark.
卖方应在每个货箱上用不褪色油漆标明箱号、毛重、净重、长、宽、高，并标有“小心轻放”，“防潮”及“防热”等字样和运输标志。
5. Date of shipment ：Aug. 8 ，2000
5 、装运日期：2000年8 月8 日
6. Port of shipment ：Los Angeles
6 、装运港：洛杉矶
7. Port of destination ：Ningbo
7 、目的港：宁波
8. Insurance ：
8 、保险
To be borne by the Buyer after shipment.
装运后由买方投保。
9. Payment ，under conditions （1），（2）and （3）below ：
9 、支付条件分以下三种条件支付：
（1）Through the letter of credit ：
（1）信用证
The Buyer ，on receipt from the Seller of the delivery
advice ，shall open an irrevocable letter of credit with the
Bank of China ，in favor of the Seller for the total value of
shipment 25 –30 days prior to the date of delivery. The
credit shall b e available against Seller ‘s draft drawn at
sight on the opening bank for 100% invoice value accompanied
by the shipping documents specified in Clause 10 hereof.
Payment shall be effected by the opening bank by telegraphic
transfer against presentation of the aforesaid draft and
documents. The letter of credit shall be valid until the 20th
day after the shipment is effected.
买方收到卖方交货通知，应在交货日期前25 –30 天，由中国银行开出以卖方为受益人的与装运金额相同的不可撤销的信用证。卖方须
向开证行出具100％发票金额即期汇票并附本合同第10 款所规定的装运单据。开证行收到上述汇票和装运单据即予以电汇支付。信用证于
装运日期后20 天内有效。
（2）Collection ：
（2）托收
The Seller may present the sight draft together with the
shipping documents （specified in Clause 10 hereof ）through
the Seller ‘s bank and Buyer ’s Bank to the Buyer for
collection after shipment.
货物装运后，卖方出具即期汇票，连同本合同第10 款规定的装运单据，通过卖方所在地银行和买方银行提交给买方托收。
（3）By direct remittance ：
（3）直接付款
Payment shall be effected by the Buyer ，by telegraphic
transfer ，within 7 （seven）days after receipt from the
Seller of the shipping documents specified in the Clause 10
hereof.
买方收到本合同第10 款规定的装运单据后7 天内，以电汇向卖方支付货款。
10. Documents ：
10 、单据
（1）In case of sea-freight ：
（1）海运
Full set of clean bills of lading marked “Freight to
Collect ”，“Freight Prepaid ”made out to bank endorsed
notifying Zhonghua International Technology Development
Corporation at the port of destination.
全套清洁海运提单，标明“运费付讫”，“运费预付”，做成空白背书并注明通知目的港的中华国际技术开发公司。
（2）In case of air-freight ：
（2）空运
One copy of airway bill marked “Freight to Collect ”，
Freight Prepaid “and sent to the Buyer.
空运提单副本一份，标明“运费付讫”，“运费预付”，寄交买方。
（3）Invoice in 4 copies indicating contract number and
shipping mark ，made out in details as per the contract
concerned.
（3）发票一式 4 份，标明合同号和装运标志，发票根据相关合同详
细填写。
（4）Packing list in 2 copies issued by the manufacturer.
（4）由生产商出具的装箱单一式两份。
（5）Certificate of quality and quantity issued by the
manufacturer.
（5）由生产商出具的质量和数量保证书。
（6）The Buyer shall be advised by mail/cable immediately
after shipment.
（6）货物装运后立即用电报或信件通知买方。
In addition ，the Seller shall ，within 10 （ten ）days
after shipment ，send by airmail two sets of aforesaid
documents （except item 4 ）with one set directly to the
Buyer and one set directly to Zhonghua International
Technology Development Corporation at the port of destination.
此外，发货10 天内，卖方将上述单据（第 5 条除外）航寄两份，一份直接给买方，一份直接给目的港的中华国际开发公司。
11. Shipment
11 、装运
（1）In case of FOB terms
（1）离岸价格条款（FOB条款）
a. The Seller shall ，30days before the contracted date of
shipment ，advise the Buyer by cable or letter of the
contract number ，name of commodity ，quality ，value ，
package number，gross weight ，measurement and date of
readiness at the port of shipment for the Buyer to book
shipping space.
皮匠网—开放、共享、免费的咨询方案报告文库 咨询人士学习成长与交流平台 本资料由皮匠网收录，更多免费资料下载请点击： https://www.doczj.com/doc/6a5544596.html,/ 翻译服务合同(含英文译本) 合同分类 : 翻译合同 合同条数 : 10 字数 : 3936 翻译服务合同（含英文译本） 甲方：_________ 地址：_________ 乙方：_________ 地址：_________ 甲乙双方本着友好协商、共同发展的原则签订本翻译服务合同，其条款如下： 一、 甲方委托乙方为其提供翻译服务，及时向乙方提交清晰、易于辨认的待译资料，提出明确要求，并对乙方的翻译质量进行监督。 二、 乙方按时完成翻译任务（如发生不可抗力的因素除外），向甲方提供已翻译好的打印件及电子文件各一份。具体交稿日期由双方商定。对于加急稿件，交稿期限由双方临时商议。 三、 乙方对甲方提供的任何资料必须严格保密，不得透露给第三方。 四、 翻译工作量统计：电子译稿：按电脑统计的中文版字符数计算（中文版 Word2000中“不计空格的字符数”）；打印译稿：按中文原稿行数×列数统计计算（行×列）。 五、 乙方按优惠价格向甲方收取翻译费用：英译汉为_________元／千字符（_________字以上）。 六、 乙方可以在翻译开始前为甲方预估翻译费，甲方付款时则按实际发生的工作量支付给乙方翻译费用（工作量统计方法见本合同第四条）。 七、 乙方承诺，交稿后，免费对翻译稿进行必要修改，不另行收取费用。 八、 付款方式：甲方在收到乙方译稿的当日按实际费用先支付乙方翻译总费用的50％，余款应在交稿后的_________日内付清，如第_________日余款还未付清，则甲方每延误一天需要向乙方交纳翻译总费用_________‰的滞纳金。 九、 乙方应当保证译文的翻译质量和翻译服务达到行业公允的水平，如对译文的翻译水平发生争议，应由双方共同认可的第三方评判，或者直接申请仲裁。 十、 本合同一式两份，双方各执一份，经甲乙双方签章后生效。
xxx engineering contract xxx工程合同 Contract No.: 合同编号： Party A: xxxCompany Limited 甲方：xxx有限公司 Party B:xxx Company Limited 乙方：xxx有限公司
(TSH)冊肖尊曲豐寺羽 '蚩制■￡ ?SH)s引d^UHd JUBLUUOI!八归PUE 心BJES '屮|EBH '￡ 。国沃旦甫 琴目举近澤 '魁号呦觀舛赃'您韦当直黑者鸳Y峯甘沿那迤Y峯曲四艮2律目回号李2 2 luaiuAed pejjuog pue pafojd o屮jo aouejdaooe ajisuo o屮」O#E pasop pue 'sailed。屮jo sieas o屮屮!M padiuejs pue sailed。屮jo saAijejuasajdaj pazuoq;ne 」o saAijejuasajdaj |e6a| aq; Aq pau6is A|np si S!屮」aye pa^uaiuaidiui eq ||eqs pejjuoo siqi 乙乙 °讷卷薪圣工逐％由劲觀首用兴觀鋼舛赃馬'「/呦觀工逐阴粗馬皐由帀菲'粗琴M 口助工&怦当丄!鸳回号：晡僧回府畐工邈李 uoipadsui ajisuo 」O#E jaaqs aouejdaoov $ uoipadsui 0屮onssi ||eqs、Aped Aq pein川suoo tueai aouejdaoov $ uoipadsui pafojd aq;疋屮si」aAopueq jo uoijipuoo aqi pejjuog 0屮6UIU6IS uodn qjuoiu 乙u!i|i!A/\ pa;a|diuoo eq ||eqs ”」o/v\ aq; :pafojd uoqonjjsuog peoy aq;」oj pouad ”」O/\A 「乙 刨ae回呂z pouad)OBJ)UOO■乙。畐工李马於來壷書當吐朝洱翦車阴混畐工XX帀型RN '澤卷阴四釧加回号李瞬羽 XX )0 uoiup oi|l jo 6uuaau!6u3 jo A JJSIUIIAI Aq pa;e|ndqs pjepuejs 心!|Enb pue pjepuejs pafojd o屮」od se pafojd o屮Qnpuoo neqs g 心阳'pejjuog S!屮ui pa;e|ndqs siuaji o屮qjiM aouepjoooe u| J 近壷 '躇印助工- siuaiuajinba^j pue)ua)uoo >IJO/V\ k ° “―”区癱歎寅'(M…区癱腸丄近回号李丑RN吐皐由 Aped V se paneo si qoiq/v\ jo qoea 'pejjuoo S!屮」opun sailed 屮。日jo aiueu juiof e Aq paneo aje g Aped pue v Aped xxx : Y峯 ' ( “RN,癱丄)'ax :者书聃卿眾灣一疯：RN 1pajiiun Auediuog xxx :g Aped xxx :Y峯聊四艮'(“2由”癱丄)'xxx
----------------------------------------------------------------------------------------------------------------------------------------- Contract No.: 2004-141000-Y21-00036859-9 Applicant: Zhou Yaqing Name of Insured: Zhou Yaqing Issuing Organization: Lin Fen Branch of China Life Insurance Date of Issue: 24/07/2004 Signature of General Manager: Yang Yanlong Insurance Piece
----------------------------------------------------------------------------------------------------------------------------------------- Contract No.: 2002-1410033-S42-000003718-9 Applicant: Zhou Yaqing Name of Insured: Zhou Yaqing Issuing Organization: Lin Fen Branch of China Life Insurance Date of Issue: 24/07/2004 Signature of General Manager: Yang Yanlong Insurance Piece
编号： 买卖合同（英文版） 甲方： 乙方： 签订日期：年月日
合同签订注意事项 一、甲乙双方应保证向对方提供的与履行合同有关的各项信息真实、有效。 二、甲乙双方签订本合同书时，凡需要双方协商约定的内容，经双 方协商一致后填写在相应的空格内。 三、签订本合同书时，甲方应加盖公章；法定代表人或主要负责人应本人签字或盖章；乙方应加盖公章；法定代表人或主要负责人应本人 签字或盖章。 四、甲乙双方约定的其他内容，合同的变更等内容在本合同内填写不下时，可另附纸。 五、本合同应使钢笔或签字笔填写，字迹清楚，文字简练、准确，不得涂改。 关键词：英文版;买卖合同
CONTRACT Contract No.： The Buyers： The Sellers： This contract is made by and between the Buyers and the Sellers; whereby the Buyers agree to buy and the Sellers agree to sell the u nder-mentioned goods subject to the terms and conditions as stipulated herei nafter： (1)Name of Commodity： (2) Quantity： (3) Unit price： (4)Total Value： (5) Packing： (6) Country of Origin ： (7) Terms of Payment： (8) insurance： (9) Time of Shipment： (10) Port of Lading： (11) Port of Destination： (12)Claims：
xxx engineering contract xxx工程合同 Contract No.: 合同编号： Party A: xxxCompany Limited 甲方：xxx有限公司 Party B:xxx Company Limited 乙方：xxx有限公司
This contract is made and entered into on the day of , 2014 by the following Parties in . 本合同于2014年月日由以下当事方在签署。 Party A: xxx Company Limited, 甲方：xxx有限公司，xxx经营的公司，住所地为xxx，（下称“甲方”），法定代表人：xxx Party B:xxx Company Limited, 乙方：xxx有限公司，一家xxx经营的公司，注册地址是：xxx，（下称“乙方”），法定代表人：xxx Party A and Party B are called by a joint name of Both Parties under this contract, each of which is called as A Party. 甲方和乙方在本合同项下统称为“双方”，单独称为“一方”。 1. Work Content and Requirements 1. 工作内容、要求 1.1 In accordance with the items stipulated in this Contract, Party B shall conduct the project as per the Project standard and quality standard stipulated by Ministry of Engineering of the Union of xx. 1.1 依据本合同所限定的条款，乙方应以xx工程部规定的建筑标准和质量要求执行本工程。 2. Contract Period 2. 合同期限 2.1 Work period for the Road Construction Project: the work shall be completed within 2 month upon signing the Contract. The condition of handover is that the Project Inspection & Acceptance Team constituted by Party A, shall issue the Inspection & Acceptance Sheet after onsite inspection. 2.1 本次工程时间周期：合同签订后14个工作日内完成，并以甲方组成的竣工验收小组现场检验并出具 验收单为竣工交接条件。 2.2 This contract shall be implementedafter this is duly signed by the legal representatives or authorized representatives of the Parties and stamped with the seals of the Parties, and closed after the onsite acceptance of the Project and Contract payment. 2.2 本合同自双方法定代表人或授权代表人签字盖章后生效，现场验收合格、款项支付完毕后关闭。 3. Health, Safety and Environment Principles (HSE) 3. 健康、安全和环境原则(HSE) 3.1 The staff from Party B shall follow the arrangement of Local government and Party A (or its representatives), and comply with the laws and regulations of Myanmar as well as rules and regulations on Health, Safety and Environment (HSE) of Party A. 3.1 乙方工作人员必须听从地方政府、甲方人员（或代表）的安排，遵守缅甸法律、法规和甲方的安全 环境健康规章制度等。 3.2 Before or during the implementation of this Project, Party B shall acknowledge, avoid and prevent the possible damage of the Project to the surrounding environment and other affiliatedfacilities, and the resulting losses shall be borne by Party B.
编号：_____________ 国际技术咨询服务合同 委托方：___________________________ 咨询方：___________________________ 签订日期：_______年______月______日
中国________________________公司（以下简称委托方）为一方，_____国 __________________________ 公司（以下简称为咨询方）为另一方，双方就 _________________________的技术咨询服务，授权双方代表按下列条款签订本合同。 This Contract is made and entered into through friendly negotiation by and between China_________________________ (hereinafter referred to as “Client”)， as one party， and__________________________ (hereinafter referred to as“Consultant”)，as the other party， concerning the technical consultancy service of________________________， under the following terms and conditions: 第一条合同内容 Article 1 Contents of Technical Consultancy Service 1.1 委托方希望获得咨询方就___________________________提供的技术咨询服务，而咨询方愿意提供此项服务。 Whereas Client desires to obtain the technical consultancy service of from Consultant and Consultant has agreed to perform such services. 1.2 技术咨询服务范围详见本合同附件一。 The Scope of Technical Services is defined in Appendix 1. 1.3 技术咨询服务的进度安排详见本合同附件二。 The Time Schedule for the Services is shown in Appendix 2. 1.4 技术咨询服务的人员安排见本合同附件三。 The Manning Schedule is described in Appendix 3.
工程施工合同 Contract 合同编号( Contract NO. )： 签订日期( Date )： 发包方（简称甲方） Party A: 承包方（简称乙方）： Party B: 根据《中华人民共和国合同法》以及其他有关法律法规规定的原则，结合本工程的具体情况，甲、乙双方在平等、自愿、协商一致的基础上达成如下协议，共同遵守。 According to “P.R.C Contract Law”,and other relevant laws and regulations to the specific circumstances of this project, parties A and B have hereby equally and voluntarily entered into the following agreement executed on the basis of mutual respect. 1.工程概况 Project overview 1.1工程名称： Project name: 1.2工程地点： Project location: 1.3工程范围： A. 新研发中心和新厂房的网络综合布线系统的施工； B. 数据中心的建设，主要包含：数据中心的装饰工程、电气系统、空调系统、机房闭路监控系统、机房门禁系统、消防系统改造、机柜系统等。 Project contents: A. The new R & D and new plant construction of network cabling systems; B. Data Center, mainly includes: data center decoration and electrical systems, air-conditioning systems, CCTV systems, access control systems, firefighting system reform, server rack systems. 1.4开工条件：合同生效后，甲方预付款到位和现场具备开工条件。 Start conditions: After the commencement of the contract, Party A has started advance and on-site conditions in place.
合同翻译 导读：范文合同翻译 【篇一：商务英文合同的句式特点及翻译】 [摘要]在合同中较多使用复合句能够将各方的权利和义务在有限的条款中完整明确地体现出来，确保合同句子结构的严谨性，以及文意的严密、细致，但也增加了合同翻译的难度。本文分析了英文合同法律文件中复杂句的特点，提出了在分析句子结构、成分的基础上，采用顺序法、逆序法及分译法翻译进行翻译的策略。 [关键词]合同法律文件复杂句翻译 我国与世界各国双边贸易日趋频繁，使得合同翻译成为一项必不可少的工作程序。合同是当事人之间设立、变更、终止民事法律关系的协议。因此，合同翻译至关重要，其内容直接影响合同双方的利益。如何做好合同法律文件的翻译，保证中方的利益不因合同文本的翻译而招致损失越发具有现实的意义。其中，由于合同的严肃，严谨，严密性，导致复合句的应用较多，而结构复杂的复合句的翻译恰是保证整体翻译效果和准确性的关键。 一、要翻译好结构复杂的复合句，首先要了解商务英文合同的句
式特点 商务合同作为一种实用文体，在词汇使用方而具有与其他文体不同的特，如用词正式规范，大量使用商务术语、法律术语及其他具有法律语言特点的正式词语。因而商务合同的翻译要求译者具有一定的专业知识。在句式结构方面，商务合同也与其他文体迥异。商务合同英语常不以易于理解为目的，大量使用复合句。究其根源，还是源于商务合同英语的文体属性。作为法律文书，商务合同规定各方当事人的权利和义务，合同文字的表达必须完整、细致、严谨、明晰。而英语的复合句，可以包含多个从句。从句之间的关系可能包容、限定，也可能并列平行，因此，在合同中较多使用复合句能够将各方的权利和义务在有限的条款中完整明确地体现出来，确保合同句子结构的严谨性，以及文意的严密、细致。但是复合句中往往包含若干从句、修饰语等等，有时会显得臃肿、晦涩，无疑会增加理解英文合同的难度，与此同时也增加了合同翻译的难度。 二、要掌握商务英文合同复合句的翻译方法 商务合同中英文复合句的出现频率高，句子结构复杂，逻辑性强，无疑给译者增添了许多困难，但是，无论多长的句子，多么复杂的结构，它们都是由一些基本的成分组成的。只要弄清了合同原文的句法结构，找出整个句子的中心内容及各层意思，然后分析各层意思之间
国际买卖合同范本（中英文对照版） 买方The Buyer: 地址Address Tel:Fax: 卖方The Seller: 地址：Address Tel:Fax: 本合同由买卖双方订立，根据本合同规定的条款，买方同意购买，卖方同意出售下述商品：This Contract is made by and between the Buyers and Sellers, whereby the Buyers agree to buy and the Sellers agree to sell the under-mentioned commodity according to the terms and conditions stipulated below: (1)货名及规格Commodity & Specification (2)数量Qty. (3)单价Unit Price (4)总价Total Amount (5)原产公司：COUNTRY OF ORIGIN : (6)装运期限：TIME OF SHIPMENT: (7)装运口岸：PORT OF SHIPMENT： (8)到货目的地：DESTINATION： (9)保险：INSURANCE： 由卖方按合同金额110％投保一切险和战争险 All Risks and War Risk for 110% contract value to be covered by the Seller. (10)运输方式：TERM OF SHIPMENT:空运By air (11)包装：PACKING： 须用坚固的新木箱包装，适合长途空运/陆运，防湿、防潮、防震、防锈、耐粗暴搬运。由于包装不良所发生的损失，由于采用不充分或不妥善的防护措施而造成的任何锈损、破损，卖方应负担由此而产生的一切费用和损失。包装箱内应包含一整套服务操作手册。卖方使用的木质包装应经薰蒸处理，并在木质包装表面标上清晰的IPPC标识。 To be packed in new strong wooden case(s) suitable for long distance air/land transportation and well protected from dampness, moisture, shock, rust and rough handling. The Sellers shall be liable for any damage to the goods on account of improper packing and for any rust damage and break damage attributable to inadequate or improper protective measures taken by the Sellers, and in such case or cases any and all losses and / or expenses incurred in consequence thereof shall be borne by the Sellers. One full set of service and operation manuals concerned shall be enclosed in the case(s). The wood packaging the Seller used shall be fumigated and marked with “IPPC”on the surface of wood packaging. (12)唛头：SHIPPING MARK: 卖方应在每件包装上，用不褪色油墨清楚地标刷件号、尺码、毛重、净重、“此端向上”、“小心轻放”、“切勿受潮”等字样，并刷有下列唛头:
Con structi on Con tract 工程合同 PO No. : XXXXXXX Buyer:. Date of sig nature: 甲方: 签约日期: Seller: 乙方： This Purchase Order is made by and betwee n the Buyer and the Seller: Whereby the Buyer agrees to buy and the Seller agrees to sell the under mentioned commodity according to the terms and conditions stipulated below: 甲乙双方经友好协商.一致就供应下列产品，达成如下条款: 1.Scope of Supply and Price 工作范围及价格明细
2.Tech ni cal Requireme nt. Quality Requireme nt, Sta ndard &Warra nty Period: Seller shall carried out the construction in strict accordance with the National Standard and the requirements stipulated in the Tech ni cal Agreeme nt No. which both party sig ned (see attached docume nts). The warranty period shall be 1 year after placement of Goods in service. 技术要求、质员要求、技术标准和质保期限:按国家标准和双方签定的技术协议（编号: 见附件）施工. 质保期为投产后1年. 3.Job Sites: 施工地点: 4.Con structi on Equipme nt, Tools &Field Pers onnel Man ageme nt: 施工设备工具及现场人员管理： (1)Al 1 the con structi on equipme nt and tools shall be provided by Seller. 所有施工用设备及工具由乙方自带。 (2)Buyer will coord in ate and arra nge the electricity and water supply on the site. 现场施工用水电由甲方协调安排 (3)Buyer will be responsible for al 1 the lifting work during the construction on site.现场施工过程中的吊装工作由 甲方负责。 (4)Seller shall be responsible for the manageraent of its field personnel safety: Seller should provide reasonable protection and insurance for its personnel * s safety. All the personnel injury and property damage caused by Seller * s failure of management shall be borne by Seller. 现场施工人员管理由乙方负责.乙方应对人员的安全等方面提供合理的保障.由于乙方管理原因造成的人身伤亡及财产损失由乙方承担.
篇一:中英文对照-工程施工合同范本 工程施工合同 contract 合同编号( contract no、 ): 签订日期( date ): 发包方(简称甲方) party a: 承包方(简称乙方): party b: 根据《中华人民共与国合同法》以及其她有关法律法规规定得原则,结合本工程得具体情况,甲、乙双方在平等、自愿、协商一致得基础上达成如下协议,共同遵守。 according to “p、r、c contract law”, and other relevant laws and regulations to the specific circumstances of this project, parties a and b have hereby equally and voluntarily entered into the following agreement executed on the basis of mutual respect、 1.工程概况 project overview 1.1.工程名称: project name: 1.2.工程地点: project location: 1.3.工程范围: a.新研发中心与新厂房得网络综合布线系统得施工; b.数据中心得建设,主要包含:数据中心得装饰工程、电气系统、空调系统、机房闭路监控 系统、机房门禁系统、消防系统改造、机柜系统等。 project contents: a.the new r & d and new plant construction of network cabling systems; b.data center, mainly includes: data center decoration and electrical systems, air-conditioning systems, cctv systems, access control systems, firefighting system reform, server rack systems、 1、4 开工条件:合同生效后,甲方预付款到位与现场具备开工条件。 1、5 工程造价:合同工程总造价为￥cny),人民币大写 project cost:total project cost is yuan ( cny )、 详细合同价格表见附件报价清单。 detailed contract price list see attached quotation list、 在详细设计与施工过程中,若工程量发生变化,按合同单价相应调整工程造价;若材质发生变化,按双方商定得补充协议调整工程造价。 in the detailed design and construction process, if the project quantity changes, according to the contract price adjustment project cost; if the material is changed, the supplemental agreement agreed by both parties for adjustment of engineering cost、 2、付款方式 terms of payment 2、1 由乙方向甲方提供指定帐户、甲方以支票方式或银行转账方式向乙方结算合同款; party b shall provide the designated account to party a, party a by check or bank transfer to pay the contract payment to party b、 2、2 本合同生效后,甲方付给乙方合同总价得40%作为工程预付款,即￥元; after the signing of this contract, party a shall pay to party b 40% of the total contract price as the project advance payment;
合同标的文件翻译中英文对照 1.1. The Buyer agrees to buy from the Seller and the Seller agrees to sell to the Buyer the Steam Dryer (here in after referred to as Equipment) and Spare P arts. The scope of the Seller's supply of Equipment is defi ned in Annex No. 1 and lists of spare p arts are defi ned in Annex No. 5 attached to this Con tract. 买方同意从卖方处购买蒸汽干燥机和备件，卖方同意向买方出售蒸汽干燥 机（以下简称“设备”）和备件。卖方的设备供应范围在本合同的附录 中载明，备件清单在本合同的附录 5中载明。 the Seller's supply of the Engineering and the Tech ni cal Docume ntati on and the delivery time, etc. are defi ned in Annex No. 6 attached hereto. 卖方有义务向买方提供工程服务，并提供建造、装配、安装、试运行、制 造、制造管理、维护所需的工程文件，设备安装、运行、维护、检验手册, Subject of Con tract 合同标的 1.2. The Seller is obligated to supply the Buyer with the engin eeri ng and engin eeri ng docume nts n ecessary for the con structi on, assembly, erecti on, test runs, p roducti on, p roducti on man ageme nt and maintenan ce, draw ings and docume nts for con structi on and erecti on, manu als for erecti on, op erati on, maintenance and inspection of equipment and other releva nt tech nical docume ntati on (here in after called Tech nical Docume ntati on). The scope of
买卖合同英文范本标准版本 买卖合同英文范本标准版本 买卖合同在外貌企业中一般中英文版的，英语通用语言，方便使用。买卖合同英文范本有哪些呢?下面是的买卖合同英文范本资料，欢迎阅读。 买卖合同英文范本篇1 CONTRACT Contract No.: The Buyers: The Sellers: This contract is made by and between the Buyers and the Sellers; whereby the Buyers agree to buy and the Sellers agree to sell the under-mentioned goods subject to the terms and conditions as stipulated hereinafter: (1)Name of Commodity： (2) Quantity: (3) Unit price: (4)Total Value: (5) Packing: (6) Country of Origin : (7) Terms of Payment: (8) insurance: (9) Time of Shipment: (10) Port of Lading: (11) Port of Destination: (12)Claims: Within 45 days after the arrival of the goods at the destination, should the quality, Specifications or quantity be found not in conformity with the stipulations of the contract except those claims for which the insurance company or the owners of the vessel are liable, the Buyers shall, have the right on the strength of the inspection certificate issued by the C.C.I.C and the relative documents to claim for compensation to the
XXX Travel Deeper项目推广服务协议 XXX Travel Deeper Campaign Promotion Service Agreement 甲方：XXX信息科技（XXX）有限公司 地址：XXXX路XXX单位 Party A: XXX Information Technology (XXX)Co.,Ltd. Address: XXXX 乙方：XXX（XXX）科技有限公司上海分公司 地址：XXXXX Party B: XXX (XXX) Technology Co., Ltd.-XXXi Branch Address: XXXX 鉴于，XXX Information Technology (XXX)Co.,Ltd.（以下简称“甲方”）因其业务发展需要委托XXX（XXX）科技有限公司上海分公司（以下简称“乙方”）负责按照其要求为其提供专业的社会化媒体服务； WHEREAS, XXX Information Technology (XXX)Co.,Ltd. (hereinafter referred to as "Party A"), due to the need for its business development, engages XXX (XXX) Technology Co., Ltd. -XXXi Branch (hereinafter referred to as "Party B") to provide Party A with professional social media services according to its requirements; 鉴于，乙方有具备丰富从业经验的专业人员，并愿意为甲方提供其所要求的专业的社会化媒体服务。 WHEREAS, Party B has professionals with rich experiences and is willing to provide Party A with professional social media services as required by Party A. 为此，甲、乙双方经友好协商，就乙方按照本协议规定的条款与条件向甲方提供网络社会化媒体服务之事宜达成如下约定： NOW, THEREFORE, Party A and Party B, through consultation, reach the following agreements with respect to the matters concerning the provision of professional social media services by Party B to Party A according to the terms and conditions set forth herein: 1服务内容
英文技术服务合同模板 篇一：国际技术咨询服务合同 （中英文 ）】 国际技术咨询服务合同 （中英文） technical consultancy service contract 合 同 号： contract no ___ 公司（以下简称委托方）为一方， ___________ 公司（以下简称为咨询方）为另一方，双方就 的技术咨询服务，授权双方代表按下列条款签订本 合同。 this contract is made and entered into through friendly negotiation by and between china ___________________________________________ (hereinafter referred to as “ client ” ), as one party, and ________________________ (hereinafter referred to as “ consultant ”),as the other party, concerning the technical consultancy service of __________ , under the following terms and conditions: 第一条 合同内容 article 1 contents of technical consultancy service whereas client desires to obtain the technical consultancy service of from consultant and consultant has agreed to perform such services. 1.2 技术咨询服务范围详见本合同附件一。 签订日期： date of signature: 签订地点： place of signature: 中国 1.1 委托方希望获得咨询方就 方愿意提供此项服务。 提供的技术咨询服务，而咨询