华为 MediaPad10 Link10.1英寸平板电脑(16G 3G版)规格参数

都市·时尚 DIGITAL数码网络随着苹果大军汹涌来袭的同时，国产数码产品也不甘示弱，数码市场一片热火朝天。

经过几十年日新月异的高速发展，国产数码产品无论是设计、外观还是功能上，都有了无数次质的飞跃。

在火热的金秋即将结束的时候，见证国产数码产品的成长与收获，来一场——国货数码 VS洋数码！国货数码洋数码VS编辑:本刊实习记者 陈可意98Copyright©博看网 . All Rights Reserved.华为MediaPad M1 8.0(S8-301u)3G版VS戴尔V enue 8(Z3480/3G版)作为两款市场报价相同的低价位移动通讯平板，华为MediaPad M1 8.0与戴尔Venue 8 Z3480都具有较高的性价比，区别或许只在于二者的定位消费人群不同。

在两款平板的显示屏大小都为8寸的情况下，M1 214.4×120.7×7.9mm的机身体积与约329g的机体重量216×130×8.95mm的机身体积与约338g的机体重量更轻巧一些，这就使作为移动通讯平板的M1的便携性增色不少。

就硬件配置来说，戴尔的此款平板搭载了Intel Atom Z3480双核CPU、16BG ROM，而华为则配置了海思麒麟910四核CPU、1GB RAM与16BG ROM，度上M1略强一些。

虽然在屏幕的分辨率上M1的1280*800，要比Venue 8 Z3480的1920*1200孙色不Copyright©博看网 . All Rights Reserved.联想ThinkPad S1 Y oga V s 东芝Z30-AK04SThinkPad S1 Yoga与东芝Z30-AK04S这两款机型，除了定位不同其余的各项配备几乎一模一样，如同为Intel Core i5-4200U(1.6GHz/L3 3M)的处理器、2.6GHz的加速技术、4GB RAM 等等。

Intrusion Alarm Systems - ICP-MAP5000-2 MAP5000 panelICP-MAP5000-2 MAP5000 panelModular Alarm Platform 5000u Up to 1500 addresses, 500 areas, and 996 usersu8 supervised inputs and one unsupervisedtamper inputu Two programmable outputs for optical andacoustical signaling device as well as for otherlocal notification devices; two programmablerelay outputs; and one auxiliary outputu Two Bosch Data Bus (BDB) interfaces andEthernet portu Event reporting via Ethernet (optional)Using a Bosch Data Bus (BDB) based on ControllerArea Network (CAN) technology as the internal andexternal bus, the panel supports a range ofapplications as part of the scalable Modular AlarmPlatform 5000 system.The panel mounts on the MAP Hinged Mounting Platein the MAP Panel Enclosure Kit. This provides easyaccess to all wiring terminals and communication portconnectors.System overviewTerminals and connectors - front viewTerminals and connectors - back viewFunctionsThe panel supports up to 1500 addresses, 500 areas, and 996 users. As part of a Modular Alarm Platform 5000 solution, the panel connects to building management systems through internet protocol (IP).A VdS system is limited to two areas, when connecting to the MAP control centers via the internal and external Data Bus. More areas can be realized with additional operating and display panels (one per area) on the LSN bus or with additional control centers on the external Data Bus using the CAN splitter module. Bosch Data Bus (BDB) based on CAN technologyThe panel provides two data buses:•Internal BDB – Limited to 3 m in total length, the internal BDB connects the panel to other MAPdevices.•External BDB –Up to 1000 m in total length, the external BDB allows command centers, LSNGateways, CAN Splitter Modules and powersupplies to be placed at the point of use, promoting greater efficiency.Inputs and outputsThe panel supports one unsupervised tamper input and eight supervised inputs. It also supports one auxiliary output, two Form C dry-contact relay outputs, and two programmable outputs for local notification devices.The auxiliary output and both power outputs areover‑current protected. The outputs are designed to provide individual protection. As a result, if a short circuit occurs on one output, the fault does not adversely affect the operation of another output. Firmware upgradesThe firmware of all devices in the MAP system can be upgraded or updated with Remote Programming Software for MAP (RPS for MAP). This allows foron‑site or off‑site (IP through Ethernet) upgrades or updates.LanguagesFor each user, a preferred language is selected when the user is created. When the user logs in, the preferred language is used at the control center.Up to 15 user-selectable languages: German, English, French, Dutch, Hungarian, Polish, Italian, Russian, Spanish, Czech, Portuguese, Latvian, Romanian, Lithuanian, and Ukrainian.Communication with Bosch Software PackagesThe MAP system allows separate communication with the following:•Management systems•Bosch Remote Programming Software (RPS) Programming and diagnostic software for controlpanels that provides remote programming, record storage, remote control, and diagnostics options. Regulatory informationBattery information:For NFA2P certification, this panel was tested with the FIAMM FG24204 battery.Installation/configuration notes Parts includedTechnical specifications ElectricalMechanical EnvironmentalOrdering informationICP-MAP5000-2 MAP5000 panelMAP panel 5000 with wiring terminals for tamper andpower supply inputs, eight supervised inputs form Crelay and auxiliary power outputs, switched voltageoutputs, two Bosch Data Bus ports and an Ethernet port.Suitable for 8 LSN Gateways and 32 Control Centers(touch screen keypads).Order number ICP-MAP5000-2 | F.01U.245.556ServicesEWE-MAP5-IW 12 mths wrty ext MAP5000 panel12 months warranty extensionOrder number EWE-MAP5-IW | F.01U.352.304Represented by:Europe, Middle East, Africa:Germany:North America:Asia-Pacific:Bosch Security Systems B.V.P.O. Box 800025600 JB Eindhoven, The Netherlands Phone: + 31 40 2577 284/xc/en/contact/ Bosch Sicherheitssysteme GmbHRobert-Bosch-Ring 585630 GrasbrunnTel.: +49 (0)89 6290 0Fax:+49 (0)89 6290 1020****************************Bosch Security Systems, LLC130 Perinton ParkwayFairport, New York, 14450, USAPhone: +1 800 289 0096Fax: +1 585 223 9180*******************.comRobert Bosch (SEA) Pte Ltd, Security Systems11 Bishan Street 21Singapore 573943Phone: +65 6571 2808Fax: +65 6571 2699/xc/en/contact/Data subject to change without notice | 202307211113 | V40 | July 21, 2023© Bosch Security Systems 2023。

Win7+Android双系统优派ViewPad 10 十寸平板电脑简单超薄，完美随身行•美国ViewSonic首款10寸平板电脑，圆弧边角设计，铝质拉丝后盖，整体设计简约时尚，厚度仅为15mm，相当于一支铅笔的厚度。

•多点触摸，随意掌握•采用10寸电容触摸屏规格，支持多点触摸，具有反映速度快，精度准确的特点•双系统随时体验•内置Google Android 1.6系统，完整的X86架构系统可同时安装Android 和win7双系统，让使用便利性更为提升，并且可以依照个人使用习惯进行操作系统的选择。

•内置SSD固态硬盘，高速新潮流•内建16GB SSD固态硬盘，比照传统硬盘有着功耗低，热量小，超高读写性能以及完全不怕震动等优势，对于随时移动的平板电脑而言如虎添翼，同样支持通过Micro SD扩展功能，最高支持32GB•铝质拉丝后盖，时尚又散热•Viewpad10采用铝质拉丝后盖，美观大方之外进一步增强了散热能力•疾速传输，毫无线缆束缚•内建802.11 b/g/n无线网络，搭载蓝牙V2.1+EDR，可方便地与移动设备进行畅连，尽享数码前沿科技带来的乐趣。

同时130W像素摄像头完全满足视频会议、视频聊天等日常应用•超大容量电池，超长续航时间•内置3200mAh锂聚合物电池，最高提供长达8小时续航时间，满足商务人士的应用需求•人体工学设计，绿色环保认证.•产品通过国家CCC产品验证，符合RoHS环保材质的选择，更表达了绿色环保的ViewSonic理念。

产品参数产品系列V iewSonic智能平板电脑型号ViewPad 10价格内核处理器Intel Atom N450,(1.66GHz, FSB 667)芯片组Intel NM10图像芯片Intel GMA3150 集成显卡液晶面板尺寸10.1〞电容式触摸屏支持多点触摸最正确分辨率1024 x 600内存内存标配1GB DDRIII 800Mhz，最大支持2GB内存插槽内存插槽x1存储性能硬盘16GB SSD固态硬盘，另外可通过Micro SD进行容量扩充(最大32GB)多媒体摄像头130万像素摄像头多媒体喇叭立体声音效通讯无线LAN 802.11 b/g/n蓝牙Bluetooth 2.1+EDR扩展接口USB USB 2.0 x 3VGA(D-Sub) Mini-VGA x1(需通过VGA转接头)RJ45 无麦克风麦克风in x 1耳机耳机 x 1读卡器Micro SDExpressCard无电源接口DC-in x 1输入键盘无触摸板无电源输入AC 输入 100-240V电源适配器 50~60Hz DC output 10.8V 40W适配器电池3200MAh 锂聚合物电池扩展插槽PCI-E扩展插槽无操作系统预装操作系统外观产品尺寸(mm)275(W) x 170(D) x 14.5(H)mm重量净重(g) 875g附件附件快速开始手册，保修卡，电源适配器，电源线，电池等。

S10-10Xu
OTA升级指导书
Huawei Technologies Co., Ltd.
华为技术有限公司
All rights reserved
版权所有侵权必究
（DVP05T05 V1.3/ IPD-CMM V3.0）
温馨提示：
1.建议使用wifi网络下载升级包，步骤：进入应用程序→设置→无线和网络→开启wifi
并连接现网无线路由器，使得Pad可以访问现网网络。

2.如果您的平板安装了非官方固件或曾以非官方渠道进行过升级，此次升级可能导致系统
异常，请您谨慎考虑是否进行此次升级。

升级流程
1)连接网络。

然后点击“设置”->“关于平板电脑”：
2）点击“系统更新(华为)”, 检测是否有更新版本：
3)如果当前存在更新版本的话, 你就可以看到升级的界面：
4)点击“下载”, 开始下载升级包：
5)等待下载完成，点击“安装”：
6)系统自动重启，进入升级模式, 开始进入版本升级过程。

7)等待升级完成，然后按电源键重启。

10寸平板电脑推荐随着iPad的发布，平板电脑市场可谓风生水起，硝烟弥漫，新产品层出不穷，下面为大家推荐几款市场反应非常不错的10寸平板电脑。

苹果iPad提起平板电脑，第一个印入脑海的肯定是苹果的iPad。

iPad可以说是10寸平板电脑的代表作，下面就对这个10寸平板电脑做一个简单的评测。

iPad分3G版和非3G版，但都带有Wi-Fi.有16G，32G,64G三种容量大小。

系统为苹果自主研发的iPhone OS，搭配1GHz的苹果A4处理器，屏幕为9.7英寸IPS显示屏支持多点触控，1024x768像素的分辨率，内置25Whr的充电式锂电池，使用时间10小时，待机时间可达1个月。

iPad长242.8mm 宽189.7mm 厚13.4mm。

WiFi版的重量为680克，WiFi+3G版的重量730克。

iPad支持蓝牙和AGPS等功能，具有3.5mm耳机插孔，支持WiFi，支持UMTS/HSDPA 和GSM/EDGE。

作为平板电脑的iPad，机身接口设计十分简洁。

机身下部大家可以看到明显的数据线兼容充电插口，其右为外置扬声器设计。

iPad机身右侧的上方为音量调节按键及无线网络开关。

机身上部黑色按键为电源开关，开机情况下按住三秒左右提示是否关机。

iPad机身顶部设计了MIC收音孔及耳机插孔，方便用户听听音乐。

机身底部设计非常简单，中心部分为明显的苹果LOGO设计，金属的外观设计质感十足。

现在iPad的报价为：苹果iPad(16G/wifi)报价为4880元；苹果iPad(32G/wifi)报价为5880元；苹果iPad(64G/wifi)报价为5999元；苹果iPad(64G/wifi/3G)报价为8690元；苹果iPad(32G/wifi/3G) 报价为7880元。

相信随着iPad在香港的上市，价格会有较大幅度的下滑，准备买iPad的朋友要时刻关注平板之家了，我们会随时发布关于iPad的最新消息。

汉王Touchpad B10汉王推出的TouchPad，在国产的10寸平板电脑中是非常出名的。

D ATA S COUT 10G T ECHNICAL S PECIFICATIONSThe Data Scout 10G (DS-10G) is the intelligent tablet that goes beyond test and measurement. It is the only simple to use, fast to learn hand held capable of simultaneously testing everything from 10G Ethernet to DS0/TIMS allowing field technicians to quickly provision and assure multiple data services.K EY P RODUCT B ENEFITS:Faster Time to Results∙Ready to test 3X Faster*∙Unique 10G Ethernet to TIMS solution∙Tests multiple services simultaneously∙Remotely updateableSimple to Use, Fast to Learn∙Touch screen Android tablet design∙Portrait and landscape modes∙Intuitive test configuration∙Exportable resultsRugged & Reliable∙Plug & Stay – no modules to lose!∙Replaces up to 8 handhelds*∙Light yet sturdy aluminum housing∙Protective non-slip boot with kickstandDesigned For∙Service Providers∙Utilities∙Mobility∙Enterprise*As compared to competitive network analyzer models. Subject to change without noticeD ATA S COUT 10G T ECHNICAL S PECIFICATION P RODUCT O VERVIEW:Productivity Applications∙Chrome web browser∙Google maps∙Email, notes & contacts∙PDF viewer∙Onboard training video’s∙Remote control/upload via LAN Business Ethernet & Metro-E Services ∙Dual 10/100/1000T/X SFP Ethernet ports∙10 Gigabit Ethernet SFP+∙BERT∙Optical power measurement∙PING & Traceroute∙RFC-2544 with quick test validation ∙Loopback, monitor and thru modes ∙Easy to read graphical reports 802.11 Wireless Validation∙Tests for proper 802.11 b,g,nconfiguration∙Performs channel scan∙Graphical frequency/channel/power display∙Remote control via Wi-FiDS3∙Automatic self test on connection∙STS-1 signal detection∙Simultaneously test Dual T1 and DS3 DS1∙Dual T1/E1 testing∙PRI-ISDN NT/TE emulation∙T1 to Ethernet Bridging∙DS0 Voice & Data Testing∙CSU/NIU Emulation Mode∙VT100 emulation∙Frame Relay optionSignaling – TIMS/DS0∙Comprehensive VF test suite∙TIMS 2/4 wire plus wideband∙CO/PBX emulation∙Replaces existing Am5, CXR-704, HP4935A4 WIRE DDS∙CSU/DSU emulation∙56K primary/secondary modes∙64K clear channel mode∙Real-time received byte display∙Monitor received signal level DATACOM∙Sync/Async & DTE/DCE modes∙V.35, RS232, RS449, RS530, X21 Intelligent Timing Verification∙Verifies network timing systems∙Combines oscilloscope, T1 test and switch box∙Composite clock/pulse analysis∙Eliminates need for expensivestorage oscilloscope∙Test 10 T1/E1 circuits in secondS TANDARD F EATURESApplies to all DS10G Analyzer KitsDISPLAY & INPUTDisplay:7” WVGA LCD touch screen800x600 resolutionButtons:Home, Back, Menu, PowerIndicators:Power On, Battery Charging, Battery Low WEIGHT & DIMENSIONSDimensions:254 x 165 x 56 millimeters (WxHxD)10 x 6.5 x 2.2 inches (WxHxD)Weight (varies by configuration):0.91 kg (2.0 lbs) minimum1.36 kg (3.0 lbs) maximum ENVIRONMENTALOperating Temperature:-10°C to 55°C14°F to 131°FOperating Humidity:0% to 93% RH non-condensingStorage Temperature:-20°C to 70°C-4°F to 158°FBattery:Type:Li Ion battery packRun Time:2-8 hours (varies by test mode)External Power:Mains: 110-240VAC, 50-60Hz with adaptors Enclosure:Shell: Rugged 1.5mm extruded aluminumBoot: Rubber with WiFi antenna storage slotKickstand: Powder coated steel Reference:User Manual:Embedded PDF readable on screenTraining Videos:Embedded viewable on screen C ONTROLLER O PTIONSOne controller option must be specifiedW/O DATACOM (DS10G-HW-B1) WITH DATACOM (DS10G-HW-B2) Requires DST-SW-DCOM software option INTERFACESManagement: LAN 10/100 Base-TUSB:(2) USB – Client(1) On-The-Go (OTG) - HostHeadset: 2.5mm output jackMicrophone: 2.5mm input jackRECORD STORAGEInternal: 4GB flashDetail Levels:Summary Log of all testsDetails per testOutput: Display, Export to USBANDROID APPLICATIONSMobiSuite OfficeChrome Web BrowserEmailContact ListCalendarMessagingCalculatorVMLite VNC Server (requires DS10-SW-RC) *Productivity applications are open-source are provided at no additional chargeOPTIONAL TEST FEATURESFeature DescriptionDS10G-SW-RC Remote ControlT EST I NTERFACE O PTIONSAt least one interface option must be specified ETHERNET (DS10-HW-ETH)Available on all DS10G AnalyzersINTERFACESElectrical:RJ45 (2) 10/100/1000BaseTOptical:SFP (2) 100/1000BaseXSFP+ (2) 10000BaseXSafety: Laser Tx on/off controlSTANDARDSIEEE 802.3-2008 (I, U, X, Z, AB-E, AN, AQ) BERT (QUICK TEST)Layers: L2Tests:ThroughoutProper Test ConfigurationFrame Size:Fixed: 64B-1518KBRandomPayload:Incremental DataPRBS-23T1-Payload (Requires DS10G-HW-EBM) Results:Frames Transmitted, Frames Received, FrameCheck Sequence Errors, Octets Transmitted,Octets Received, Tx PAUSE CONTROLFrames, Rx PAUSE CONTROL Frames, Frames with Rx Errors, Frames with Tx Errors, UNICAST Packets Rcvd, MULTICAST Packets Rcvd,BROADCAST Packets Rcvd, UNICAST Packets Sent, MULTICAST Packets Sent, BROADCASTPackets Sent, Ethernet Frames Dropped, TotalOctets Received Total Packets Received,Number of Frames Received in each size-range, Undersized, Oversized, <64 octets, 65-127octets, 128-255 octets, 256-511 octets, 512-1023 octets, 1024-1518 octets, 1519-max octets, Jabbers, FragmentsLOOPBACKPort B: Layers 1, 2RFC-2544Layers: L2File formats: CSV, PDFTests:ThroughoutLatencyFrame LossBack to Back (burst)Modes:Port A (local) to Port B (local)Port A (local) to Port B (remote) ETHERNET (DS10-HW-ETH) Continued Result Report:Test Result Summary:System and Test ConfigurationMode, Physical Interface, Ethernet Speed,Auto-Negotiation, Duplex Mode, FlowControl, Negotiated Link StateSFP+ Information:Test Port, Identifier, Connector Type,Vendor Name, Vendor OUI, Part Number,Revision, Serial-Number, Mfg Date code,Diagnostic SupportThroughput & Frame Loss TestsSelected Frames sizes, Maximum Test Load(%FPS), Minimum Test Load (%FPS), LoadStep Size (%), Number of trials, Number ofvalidations, Trial duration (seconds/step)Latency TestSelected Frames sizes, Test Load (%FPS)Number of trials, Trial duration (sec/step) Test Result Details:Graphical charts for all selected testsThroughput & Frame Loss:Summary per iteration:Test Parameter, Test Duration, FramesSent, Frames Received, Frames Lost,Valid Frames Received, Errored FramesReceived, Tx Frame Rate, Rx FrameRate, Total Bytes Received, Bytes/FrameReceived, Frame Throughput, TotalThroughputPer Iteration:Frames Transmitted, Frames Received,Frame Check Sequence Errors, OctetsTransmitted, Octets Received, Tx PAUSECONTROL Frames, Rx PAUSECONTROL Frames, Frames with RxErrors, Frames with Tx Errors, UNICASTPackets Rcvd, MULTICAST PacketsRcvd, BROADCAST Packets Rcvd,UNICAST Packets Sent, MULTICASTPackets Sent, BROADCAST PacketsSent, Ethernet Frames Dropped, TotalOctets Received Total Packets Received,Number of Frames Received in each size-range, Undersized, Oversized, <64 octets,65-127 octets, 128-255 octets, 256-511octets, 512-1023 octets, 1024-1518octets, 1519-max octets, Jabbers,FragmentsLatency (by frame size tested):Average Latency, JitterBack-to-Back (by frame size tested):Max Measured Burst (avg.), Max Burst for1s duration, % DeviationOPTIONAL TEST FEATURESFeature DescriptionDS10G-SW-201 Dual Port 1GbEDS10G-SW-110 Single Port 10GbEDS10G-SW-210 Dual Port 10GbE (Available Q1-15)Wi-Fi (DS10-HW-WIFI)Available on all DS10G AnalyzersINTERFACEAntenna: SMA with included antennaGENERALFrequency Bands: 2.4GHz, 5GHzNETWORK STANDARDSIEEE 802.11bIEEE 802.11gIEEE 802.11aIEEE 802.11n HT20, HT40NETWORK STANDARDSBluetooth: BDR/EDR/LEMODULATIONModes:OFDM (64QAM, 16QAM, QPSK, BPSK),DSSS (CCK, DQPSK, DBPSK),DSSS-OFDM (64QAM, 16QAM, QPSK, BPSK) ENCRYPTIONHardware:WEP, WPA/WPA2 (TKIP/AES-CCMP), WAPI QUALITY OF SERVICEStandards: WMM, WMM-PS, 802.11eTESTS*Channel GraphDiscovers and displays access points on channel graph overlayTime Graph:Detects & displays running histogram of APcommunicationsChannel Rating:Indicates best channel for selected APAP List:Detects and displays access point detailedinformationSignal Meter:Range: -100dBm to -40dBmPass/Fail: Color coded for quality*Wifi Analyzer 3.6.3 open-source test application is preloaded and provided at no additional charge DS1 (DS10-HW-PDH1)Available on all DS10G AnalyzersINTERFACESDS1: Dual BantamSTANDARDST1: ANSI T1.403, AT&T Pub.62411DS1 RECEIVERModes:Monitor, Term, Bridged, Emulate, CSU/NIU, FT1, Drop & InsertFraming:Auto, ESF, SF, SF-D4, SLC96, UnframedLine Code:B8ZS, AMI DS1 (DS10-HW-PDH1) ContinuedDS1 RECEIVERClock Receive:1.544MHz ±300ppm recoveredLine Rate:Full T1 1.544MHz, N x 56/64kbpsImpedance:100Ω nominalBridged > 1KΩSensitivity:Monitor: -15 to –32dB res.Terminate & Bridge: +6 to –36dBFreq Resolution & Accuracy:0.1Hz, ±7ppm ±1.472HzFrequency Slips:±1HzRound Trip Delay Resolution:±1msDS1 RECEIVERExcessive Jitter:>128 bit attenuator toleranceLevel Resolution & Accuracy:0 to -40dBdsx-1.0 to -39dB ±1.25dBModes:Term, Drop/Insert, BypassFraming:Auto, ESF, D4, SLC96, UnframedLine Code:B8ZS, AMIClock:1.544MHz ±10ppmLine Rate:Full T1 1.544MHz, N x 56/64kbpsImpedance:100Ω nominalLBO:0, -7.5 and -15dBError Inject:Logical, Framing-Loss (2 F-bits), BPVBERTTest Patterns:Auto, QRSS, 1:7,All-1s, All-0s, 511, 2047, 2^15-1, 2^20-1, 2^23-1,DALY, Bridge Tap, 1:1, 2in8, 1in16, D5D5Errors Reported:LOS, OOF, AIS, YEL,Events Reported:UAS, CRC, BPV, F-bits, 1’s D, ExZLOOPBACKLoopback Codes:NREM, NLOC, NDU1, NDU2, CREM, CLOC,CDU1, CDU2, ARM, HTUR, HTUC, NRE1, NRE2, CSU, NIU4, NIU5, WestellSmart Repeater codes:ILR, IOR, Payload, Line, Network, Local, SelfDS1 (DS10-HW-PDH1) ContinuedDS0 TESTING (DST-SW-V)Interface:RJ11 900Ω+2.16uF nom inal impedance Emulation:CO, Station, PBXModes:LS, GS, DID-imm, DID-Wink, E&M-imm, E&M-wink DS0 to 2-wire Drop:2600 feet max. 0±0.2dB, 250-3400Hz OPTIONAL TEST FEATURESFeature DescriptionDST-SW-DT1 Dual T1DST-SW-N1 CSU/NIU EmulationDST-SW-V DS0 Voice AnalysisDST-SW-X Insert/Drop/BypassDST-SW-DCOM DTE/DCE DatacomDST-SW-E1 E1 On-The-FlyDS1+DS3 (DS10-HW-PDH2)Available on all DS10G AnalyzersSTANDARDSDS1:ANSI T1.403, AT&T Pub.62411DS3:G.703, G.775, TSY-009-000499, T1.404, T1.102, T1.107INTERFACESDS1: Dual BantamDS3: BNCDS1 RECEIVERSee DS10-HW-PDH1DS1 TRANSMITTERSee DS10-HW-PDH1DS3 RECEIVERModes:Monitor, Term, Term HI, CSU/NIU emulation, DS2 status, DS1 drop, DS3 thru, DS3 thru (no gen) Framing:C-bit, M13, Unframed, AutoLine Code:B3ZSClock:44.736MHz ±20ppmImpedance:75Ω nominalSensitivity:DSX: up to 26dB res.HI/LO: +6 to –26dBALARMS & EVENTSCurrent:C-bit, BPV, F-bit, P-bit, FEBEHistory:LOS, OOF, AIS, X-bit, Idle, UAS, ExZ DS1+DS3 (DS10-HW-PDH2) Continued BERTTest Patterns:2^23-1, 2^20-1, 2^15-1, QRSS, 1:1, 1010, 1100, 1111, 3in24Results/Errors Reported:BIT, BER, ES, EFS, %EFS, SES, %SESERROR INJECTIONErrors: Logic, F-Bit, BPV, C-Bit, P-Bit, ExZero’s LOOPBACKModes: Local (self/line), Stuff bit M23FEAC:Transmits and displays any of 11 received FEAC codes or NONEDS2 CIRCUIT ANALYSISModes:Real-time monitor of DS2 Channel #1 through #7 Alarms & Events:RAI, AIS or LOF on any or all DS2 ChannelsError Inject:RAI, AIS or LOF on selected DS2 ChannelsDS1 DROP TESTINGConnector:Bantam Tx & Rx jackLine Code:AMI, B8ZSClock:1.544MHz ±200ppmImpedance:100Ω nominalSignal Level:DSX nominalOPTIONAL TEST FEATURESFeature DescriptionDST-SW-H3 DS3 Through ModeDST-SW-D1D DS1 DropDST-SW-NX DS3 CSU/NIU EmulationDST-SW-DT1 Dual T1DST-SW-N1 CSU/NIU EmulationDST-SW-V DS0 Voice AnalysisDST-SW-E Euro/Asian ISDN-PRI Protocols DST-SW-X Insert/Drop/BypassDST-SW-DCOM DTE/DCE DatacomDST-SW-E1 E1 On-The-FlyISDN PRI (DS10-HW-P)Available on all DS10G AnalyzersGENERALInterface: Dual BantamModes: NT, TEClock: Recovered, InternalSwitch Type Support:National ISDN-2 (default), DMS100, 5ESS,4ESS, Euro-ISDN, VN6, 1TR6, QSIG, NTT, KDD Country Codes:USA & Canada (default), Euro-ISDN, France,Germany, Japan, Hong Kong, KoreaISDN PRI (DS10-HW-P) ContinuedCall Support: Voice, DataSimultaneous Termination: 23 channels Message Decode: Q.931BERTTest Patterns: All-1s, 511, 2047, Alt-0/1 Results Displayed:Bit, BER, ES, EFS, %EFS, SES, %SES OPTIONAL TEST FEATURESFeature DescriptionDST-SW-E Euro/Asia PRI Protocol Support DDS (DS10-HW-DDS)Available on all DS10G AnalyzersGENERALInterface: RJ-48Impedance: 135 OhmModes Supported: Terminate, ThroughData Rates Supported:2.4K, 4.8K, 9.6K,19.2K, 38.4K, 56K, 64K Clock Source:Internal, External, NetworkLOOPBACKModes:Remote Latching CCITT V.54Remote DSULocal CSULocal DSUCodes:DMI –Data Mode Idle (all 1’s)CMI – Control Mode IdleOOS – Out of Service (network out of service) OOF – Out of FrameUMC- Unassigned Mux CodeASC – Abnormal Station CodeMOS – Mux Out of SyncRECEIVE LEVELDetects and displays signal receive level SEALING CURRENTDetects and displays circuit sealing current BERTTest Patterns:2047 (2^11-1), 511 (2^9-1), SP1, SP2, SP3,SP4, SP5, Packet, All-1’s, All- 0’s, Alt 1:1 Test Results:BER, ES, EFS, %EFS, SES, %SESError Injection: BitRECEIVED BYTE DECODEDisplay:Binary and hexInvalid BPV DATACOM (DS10-HW-DCOM)Available on all DS10G AnalyzersGENERALInterfaces:RS232, V.35, X.21, DB15, RS449, DB37, RS530 Emulation: DTE, DCE (T1/E1, DDS)Modes: Synch, Asynch, Auto DetectClock Source: Internal, ExternalLOOPBACKModes: Bi-DirectionalBERTTest Patterns:QRSS, 3in24,1:7 (1in8), All-1’s, All-0’s, 1:1 Alt,2^23-1, 2^20-1, 2^15-1, 2047, 511 (2^9), 2in8,FOXTest Results:BER, ES, EFS, %EFS, SES, %SESError Injection: BitTIMS (DS10-HW-T)Available on all DS10G AnalyzersGENERALInterfaces:RJ11BantamSIGNALING (2-wire)Impedance:900, 600, 1200ΩCO output:Dial-ToneRing2 REN LineOff-Hook > 20maCO Source: -48 ±1.5VdcEmulation:CO, Station, PBXDigits:DTMF, MF, DPModes:LS, GS, E&M I-V, DID-imm, DID-WinkTiming:Pre-Wink, Pre-Digit, Wink DelayVoltage DC:2 to ±90v ±1VdcResolution:0.1 VCurrent:±10 to 80 ±1.0mASELECTIVE SIGNALING (4-wire)Modes: SS1, SS4Output Level: -8dBm0Break: 2600Hz ±2HzMake: 2400 ±2Hz60:40 Inter-digit Interval: 250mS QuietTIMS (DS10-HW-T) Continued2/4 WIRE VOICEBAND & WIDEBAND Standard: IEEE 743-1995Impedance: 100, 135, 900, 600, 1200ΩBridge Mode: > 1K ΩOutput Level: +10 to -50dBm ±.5dBLevel Measurements:+13 to -60dBm ±0.5dBm to 500KHz500KHz to 2MHz ±1dBFREQUENCY MEASUREMENTVoiceband: 50Hz to 16KHz ±1HzWideband: 16KHz to 2MHz ± 1HzNOISE MEASUREMENTRange: 92 to <10 dBrn for all filters ±1 dB Holding Tone: 1002-1022HzNoise Sensitivity: 29dBrn-90 dBrnNotch: 1010Hz > 50dB attenuationNOISE MEASUREMENTNoise-to-Ground:+60dBrnc to +110dBrnc 600/900 OhmsImpulse Low Threshold Settings:29dB to 84 dB, Count 9999 with Overflow/Clear PHASE/AMPLITUDEJitter: +10dBm to -40dBmAmplitude: 0.1%-100% peak ±5%Phase: 0.1 to 350º ±5%GAIN HITSRanges: 2, 3, 4, 6, 8,10dBAccuracy: ± .5dBCount: 9999 with Overflow and ClearPHASE HITSRange: 5-75 degreeAccuracy: ± 10%Count: 9999 with Overflow & ClearDropout: 12dB ±1dB23-TONE SEQUENCEStandard: IEEE 743-1995Range: -8dBm, 0 to -40dBmIndividual Freq & Level 23-Tone Intermod Distortion: 2nd & 3rd OrderOutput: -6 dBm to -40 dBmMeasurement: ±2 dB23-Tone RMS Composite Tone:IMD, EDD: 0 to 12ms ±.01msS/TD, S/NR: +/- 2 dBReturn Loss:–ERL, SRL-Lo, SRL-HIOutput: -6 dBm to -10 dBmMeasure: 0-30dB ± 1dBVOICEBAND FIXED TONESFrequencies:404Hz, 1004Hz, 2804Hz, 2713Hz, 1804Hz,3204Hz, 1913Hz, 2413HzAccuracy: ± 1Hz TIMS (DS10-HW-T) Continued BROADBAND FIXED TONESFrequencies:28K, 40K, 48K, 82K, 96K,196K, 392K, 1024K Accuracy: ±1HzFREQUENCY SWEEPVoiceband: 404Hz to 3204HzWideband: 20KHz to 2MHzQuiet Tone: 0Hz terminated3 level speaker volume controlOPTIONAL TEST FEATURESFeature DescriptionDST-SW-PRO4 4-Button Frequency ProgramDST-SW-4 4W Interface & Extended Range DST-SW-EM E&M Type I-V Signaling, Trunk, Tie DST-SW-DG Dropout, Gains, Hits, Phase, JitterD ISCLAIMERThis specification is subject to change without notice. Errors and omissions excepted.C ONFIDENTIALITYThe information contained in this Technical Specification is the confidential, proprietary information of Greenlee Textron Inc. and, in addition to any restrictions that may apply pursuant to the terms of any Confidentiality or Non-Disclosure Agreement between Greenlee and the recipient (or the recipient's employer), is not to be copied, disclosed or distributed in whole or in part to any third party or used by the recipient in any manner other than the intended purpose for which it was provided to the recipient, without the prior written approval of Greenlee Textron Inc.Do not read this Specification if you are not the intended recipient. If you are not the intended recipient, or the person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of any of the information contained in or attached to this transmission is STRICTLY PROHIBITED. If you have received this specification in error, please immediately notify Greenlee and destroy the original specification without reading or saving in any manner.。

快速入門型號：GEM-702L1 HUAWEI MediaPad X2 一覽感謝您購買了HUAWEI MediaPad X2。

按住電源鍵可進行開機或關機，或是重新啟動裝置。

輕按電源鍵可開啟或關閉螢幕。

本節包含操作本裝置的重要資訊，亦包括如何安全使用裝置的資訊。

使用裝置前請詳讀這些資訊。

電子裝置禁止使用本裝置時，請勿使用。

若使用本裝置會造成危險或干擾電子裝置，請勿使用裝置。

對醫療設備的干擾•請遵循由醫院及健康護理中心訂立的規則。

禁止使用本裝置時，請勿使用。

•部分無線裝置可能會干擾助聽器或心律調整器。

詳情請洽詢電信業者。

•心律調整器製造商建議在手機與心律調整器之間保持最少15 公分的距離，以免對心律調整器產生干擾。

如果使用心律調整器，請在心律調整器的反側使用裝置，且勿將裝置放置於胸前口袋。

使用過度恐傷害視力•使用30分鐘請休息10分鐘。

•2歲以下幼兒不看螢幕，2歲以上每天看螢幕不要超過1小時。

使用耳機時保護聽力•為避免聽力受損之虞，請勿長時間以高音量使用耳機。

•耳機音量過大可能會造成聽力受損。

為降低這類風險，請將耳機調整到安全且舒適的音量。

•開車時音量過大可能造成分心，增加發生意外事故的危險。

有易燃物與爆炸物的區域•請勿在儲存易燃物或爆炸物的地方使用本裝置(例如，加油站、油槽或化學工廠)。

在這些環境下使用本裝置會增加爆炸或火災的危險。

此外，請遵守文字或符號所示的指示操作。

•在儲存或運送本裝置時，請勿將其和易燃液體、氣體或爆炸物置於同一區域。

交通安全•使用裝置時請遵守當地的法律與規定。

為避免意外事故的發生，行駛中請勿使用無線裝置。

•專心開車，安全第一。

•開車時勿握拿本裝置。

請使用免持聽筒。

•必須撥打或接聽電話時，請先在安全的地方停車。

•無線射頻訊號可能會影響汽車的電子系統。

如需詳細資訊，請洽詢汽車製造商。

•請勿將本裝置放置於汽車安全氣囊上方或安全氣囊展開的範圍。

否則可能會在安全氣囊爆開時，因強大的力量而導致您受傷。